summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorRussell King <rmk+kernel@arm.linux.org.uk>2015-04-04 22:09:46 +0300
committerRussell King <rmk+kernel@arm.linux.org.uk>2015-06-02 01:48:19 +0300
commitb2c3e38a54714e917c9e8675ff5812dca1c0f39d (patch)
tree0d5e9747b2c73ccd4c961c8d6a50841b52cf11fd
parent1221ed10f2a56ecdd8ff75f436f52aca5ba0f1d3 (diff)
downloadlinux-b2c3e38a54714e917c9e8675ff5812dca1c0f39d.tar.xz
ARM: redo TTBR setup code for LPAE
Re-engineer the LPAE TTBR setup code. Rather than passing some shifted address in order to fit in a CPU register, pass either a full physical address (in the case of r4, r5 for TTBR0) or a PFN (for TTBR1). This removes the ARCH_PGD_SHIFT hack, and the last dangerous user of cpu_set_ttbr() in the secondary CPU startup code path (which was there to re-set TTBR1 to the appropriate high physical address space on Keystone2.) Tested-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-rw-r--r--arch/arm/include/asm/memory.h16
-rw-r--r--arch/arm/include/asm/proc-fns.h7
-rw-r--r--arch/arm/include/asm/smp.h2
-rw-r--r--arch/arm/kernel/head-nommu.S2
-rw-r--r--arch/arm/kernel/head.S42
-rw-r--r--arch/arm/kernel/smp.c10
-rw-r--r--arch/arm/mach-keystone/platsmp.c13
-rw-r--r--arch/arm/mm/proc-v7-2level.S6
-rw-r--r--arch/arm/mm/proc-v7-3level.S14
-rw-r--r--arch/arm/mm/proc-v7.S26
10 files changed, 60 insertions, 78 deletions
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 184def0e1652..3a72d69b3255 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -18,8 +18,6 @@
#include <linux/types.h>
#include <linux/sizes.h>
-#include <asm/cache.h>
-
#ifdef CONFIG_NEED_MACH_MEMORY_H
#include <mach/memory.h>
#endif
@@ -133,20 +131,6 @@
#define phys_to_page(phys) (pfn_to_page(__phys_to_pfn(phys)))
/*
- * Minimum guaranted alignment in pgd_alloc(). The page table pointers passed
- * around in head.S and proc-*.S are shifted by this amount, in order to
- * leave spare high bits for systems with physical address extension. This
- * does not fully accomodate the 40-bit addressing capability of ARM LPAE, but
- * gives us about 38-bits or so.
- */
-#ifdef CONFIG_ARM_LPAE
-#define ARCH_PGD_SHIFT L1_CACHE_SHIFT
-#else
-#define ARCH_PGD_SHIFT 0
-#endif
-#define ARCH_PGD_MASK ((1 << ARCH_PGD_SHIFT) - 1)
-
-/*
* PLAT_PHYS_OFFSET is the offset (from zero) of the start of physical
* memory. This is used for XIP and NoMMU kernels, and on platforms that don't
* have CONFIG_ARM_PATCH_PHYS_VIRT. Assembly code must always use
diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
index 5324c1112f3a..8877ad5ffe10 100644
--- a/arch/arm/include/asm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@@ -125,13 +125,6 @@ extern void cpu_resume(void);
ttbr; \
})
-#define cpu_set_ttbr(nr, val) \
- do { \
- u64 ttbr = val; \
- __asm__("mcrr p15, " #nr ", %Q0, %R0, c2" \
- : : "r" (ttbr)); \
- } while (0)
-
#define cpu_get_pgd() \
({ \
u64 pg = cpu_get_ttbr(0); \
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index 18f5a554134f..487aa08f31ee 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -61,7 +61,7 @@ asmlinkage void secondary_start_kernel(void);
struct secondary_data {
union {
unsigned long mpu_rgn_szr;
- unsigned long pgdir;
+ u64 pgdir;
};
unsigned long swapper_pg_dir;
void *stack;
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index aebfbf79a1a3..84da14b7cd04 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -123,7 +123,7 @@ ENTRY(secondary_startup)
ENDPROC(secondary_startup)
ENTRY(__secondary_switched)
- ldr sp, [r7, #8] @ set up the stack pointer
+ ldr sp, [r7, #12] @ set up the stack pointer
mov fp, #0
b secondary_start_kernel
ENDPROC(__secondary_switched)
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 3637973a9708..7304b4c44b52 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -131,13 +131,30 @@ ENTRY(stext)
* The following calls CPU specific code in a position independent
* manner. See arch/arm/mm/proc-*.S for details. r10 = base of
* xxx_proc_info structure selected by __lookup_processor_type
- * above. On return, the CPU will be ready for the MMU to be
- * turned on, and r0 will hold the CPU control register value.
+ * above.
+ *
+ * The processor init function will be called with:
+ * r1 - machine type
+ * r2 - boot data (atags/dt) pointer
+ * r4 - translation table base (low word)
+ * r5 - translation table base (high word, if LPAE)
+ * r8 - translation table base 1 (pfn if LPAE)
+ * r9 - cpuid
+ * r13 - virtual address for __enable_mmu -> __turn_mmu_on
+ *
+ * On return, the CPU will be ready for the MMU to be turned on,
+ * r0 will hold the CPU control register value, r1, r2, r4, and
+ * r9 will be preserved. r5 will also be preserved if LPAE.
*/
ldr r13, =__mmap_switched @ address to jump to after
@ mmu has been enabled
adr lr, BSYM(1f) @ return (PIC) address
+#ifdef CONFIG_ARM_LPAE
+ mov r5, #0 @ high TTBR0
+ mov r8, r4, lsr #12 @ TTBR1 is swapper_pg_dir pfn
+#else
mov r8, r4 @ set TTBR1 to swapper_pg_dir
+#endif
ldr r12, [r10, #PROCINFO_INITFUNC]
add r12, r12, r10
ret r12
@@ -158,7 +175,7 @@ ENDPROC(stext)
*
* Returns:
* r0, r3, r5-r7 corrupted
- * r4 = page table (see ARCH_PGD_SHIFT in asm/memory.h)
+ * r4 = physical page table address
*/
__create_page_tables:
pgtbl r4, r8 @ page table address
@@ -333,7 +350,6 @@ __create_page_tables:
#endif
#ifdef CONFIG_ARM_LPAE
sub r4, r4, #0x1000 @ point to the PGD table
- mov r4, r4, lsr #ARCH_PGD_SHIFT
#endif
ret lr
ENDPROC(__create_page_tables)
@@ -381,9 +397,9 @@ ENTRY(secondary_startup)
adr r4, __secondary_data
ldmia r4, {r5, r7, r12} @ address to jump to after
sub lr, r4, r5 @ mmu has been enabled
- ldr r4, [r7, lr] @ get secondary_data.pgdir
- add r7, r7, #4
- ldr r8, [r7, lr] @ get secondary_data.swapper_pg_dir
+ add r3, r7, lr
+ ldrd r4, [r3, #0] @ get secondary_data.pgdir
+ ldr r8, [r3, #8] @ get secondary_data.swapper_pg_dir
adr lr, BSYM(__enable_mmu) @ return address
mov r13, r12 @ __secondary_switched address
ldr r12, [r10, #PROCINFO_INITFUNC]
@@ -397,7 +413,7 @@ ENDPROC(secondary_startup_arm)
* r6 = &secondary_data
*/
ENTRY(__secondary_switched)
- ldr sp, [r7, #4] @ get secondary_data.stack
+ ldr sp, [r7, #12] @ get secondary_data.stack
mov fp, #0
b secondary_start_kernel
ENDPROC(__secondary_switched)
@@ -416,12 +432,14 @@ __secondary_data:
/*
* Setup common bits before finally enabling the MMU. Essentially
* this is just loading the page table pointer and domain access
- * registers.
+ * registers. All these registers need to be preserved by the
+ * processor setup function (or set in the case of r0)
*
* r0 = cp#15 control register
* r1 = machine ID
* r2 = atags or dtb pointer
- * r4 = page table (see ARCH_PGD_SHIFT in asm/memory.h)
+ * r4 = TTBR pointer (low word)
+ * r5 = TTBR pointer (high word if LPAE)
* r9 = processor ID
* r13 = *virtual* address to jump to upon completion
*/
@@ -440,7 +458,9 @@ __enable_mmu:
#ifdef CONFIG_CPU_ICACHE_DISABLE
bic r0, r0, #CR_I
#endif
-#ifndef CONFIG_ARM_LPAE
+#ifdef CONFIG_ARM_LPAE
+ mcrr p15, 0, r4, r5, c2 @ load TTBR0
+#else
mov r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index cca5b8758185..90dfbedfbfb8 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -86,9 +86,11 @@ void __init smp_set_ops(struct smp_operations *ops)
static unsigned long get_arch_pgd(pgd_t *pgd)
{
- phys_addr_t pgdir = virt_to_idmap(pgd);
- BUG_ON(pgdir & ARCH_PGD_MASK);
- return pgdir >> ARCH_PGD_SHIFT;
+#ifdef CONFIG_ARM_LPAE
+ return __phys_to_pfn(virt_to_phys(pgd));
+#else
+ return virt_to_phys(pgd);
+#endif
}
int __cpu_up(unsigned int cpu, struct task_struct *idle)
@@ -108,7 +110,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
#endif
#ifdef CONFIG_MMU
- secondary_data.pgdir = get_arch_pgd(idmap_pgd);
+ secondary_data.pgdir = virt_to_phys(idmap_pgd);
secondary_data.swapper_pg_dir = get_arch_pgd(swapper_pg_dir);
#endif
sync_cache_w(&secondary_data);
diff --git a/arch/arm/mach-keystone/platsmp.c b/arch/arm/mach-keystone/platsmp.c
index 5f46a7cf907b..4bbb18463bfd 100644
--- a/arch/arm/mach-keystone/platsmp.c
+++ b/arch/arm/mach-keystone/platsmp.c
@@ -39,19 +39,6 @@ static int keystone_smp_boot_secondary(unsigned int cpu,
return error;
}
-#ifdef CONFIG_ARM_LPAE
-static void __cpuinit keystone_smp_secondary_initmem(unsigned int cpu)
-{
- pgd_t *pgd0 = pgd_offset_k(0);
- cpu_set_ttbr(1, __pa(pgd0) + TTBR1_OFFSET);
- local_flush_tlb_all();
-}
-#else
-static inline void __cpuinit keystone_smp_secondary_initmem(unsigned int cpu)
-{}
-#endif
-
struct smp_operations keystone_smp_ops __initdata = {
.smp_boot_secondary = keystone_smp_boot_secondary,
- .smp_secondary_init = keystone_smp_secondary_initmem,
};
diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S
index 10405b8d31af..fa385140715f 100644
--- a/arch/arm/mm/proc-v7-2level.S
+++ b/arch/arm/mm/proc-v7-2level.S
@@ -148,10 +148,10 @@ ENDPROC(cpu_v7_set_pte_ext)
* Macro for setting up the TTBRx and TTBCR registers.
* - \ttb0 and \ttb1 updated with the corresponding flags.
*/
- .macro v7_ttb_setup, zero, ttbr0, ttbr1, tmp
+ .macro v7_ttb_setup, zero, ttbr0l, ttbr0h, ttbr1, tmp
mcr p15, 0, \zero, c2, c0, 2 @ TTB control register
- ALT_SMP(orr \ttbr0, \ttbr0, #TTB_FLAGS_SMP)
- ALT_UP(orr \ttbr0, \ttbr0, #TTB_FLAGS_UP)
+ ALT_SMP(orr \ttbr0l, \ttbr0l, #TTB_FLAGS_SMP)
+ ALT_UP(orr \ttbr0l, \ttbr0l, #TTB_FLAGS_UP)
ALT_SMP(orr \ttbr1, \ttbr1, #TTB_FLAGS_SMP)
ALT_UP(orr \ttbr1, \ttbr1, #TTB_FLAGS_UP)
mcr p15, 0, \ttbr1, c2, c0, 1 @ load TTB1
diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S
index d3daed0ae0ad..5e5720e8bc5f 100644
--- a/arch/arm/mm/proc-v7-3level.S
+++ b/arch/arm/mm/proc-v7-3level.S
@@ -126,11 +126,10 @@ ENDPROC(cpu_v7_set_pte_ext)
* Macro for setting up the TTBRx and TTBCR registers.
* - \ttbr1 updated.
*/
- .macro v7_ttb_setup, zero, ttbr0, ttbr1, tmp
+ .macro v7_ttb_setup, zero, ttbr0l, ttbr0h, ttbr1, tmp
ldr \tmp, =swapper_pg_dir @ swapper_pg_dir virtual address
- mov \tmp, \tmp, lsr #ARCH_PGD_SHIFT
- cmp \ttbr1, \tmp @ PHYS_OFFSET > PAGE_OFFSET?
- mrc p15, 0, \tmp, c2, c0, 2 @ TTB control register
+ cmp \ttbr1, \tmp, lsr #12 @ PHYS_OFFSET > PAGE_OFFSET?
+ mrc p15, 0, \tmp, c2, c0, 2 @ TTB control egister
orr \tmp, \tmp, #TTB_EAE
ALT_SMP(orr \tmp, \tmp, #TTB_FLAGS_SMP)
ALT_UP(orr \tmp, \tmp, #TTB_FLAGS_UP)
@@ -143,13 +142,10 @@ ENDPROC(cpu_v7_set_pte_ext)
*/
orrls \tmp, \tmp, #TTBR1_SIZE @ TTBCR.T1SZ
mcr p15, 0, \tmp, c2, c0, 2 @ TTBCR
- mov \tmp, \ttbr1, lsr #(32 - ARCH_PGD_SHIFT) @ upper bits
- mov \ttbr1, \ttbr1, lsl #ARCH_PGD_SHIFT @ lower bits
+ mov \tmp, \ttbr1, lsr #20
+ mov \ttbr1, \ttbr1, lsl #12
addls \ttbr1, \ttbr1, #TTBR1_OFFSET
mcrr p15, 1, \ttbr1, \tmp, c2 @ load TTBR1
- mov \tmp, \ttbr0, lsr #(32 - ARCH_PGD_SHIFT) @ upper bits
- mov \ttbr0, \ttbr0, lsl #ARCH_PGD_SHIFT @ lower bits
- mcrr p15, 0, \ttbr0, \tmp, c2 @ load TTBR0
.endm
/*
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 3d1054f11a8a..873230912894 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -343,9 +343,9 @@ __v7_setup:
and r10, r0, #0xff000000 @ ARM?
teq r10, #0x41000000
bne 3f
- and r5, r0, #0x00f00000 @ variant
+ and r3, r0, #0x00f00000 @ variant
and r6, r0, #0x0000000f @ revision
- orr r6, r6, r5, lsr #20-4 @ combine variant and revision
+ orr r6, r6, r3, lsr #20-4 @ combine variant and revision
ubfx r0, r0, #4, #12 @ primary part number
/* Cortex-A8 Errata */
@@ -354,7 +354,7 @@ __v7_setup:
bne 2f
#if defined(CONFIG_ARM_ERRATA_430973) && !defined(CONFIG_ARCH_MULTIPLATFORM)
- teq r5, #0x00100000 @ only present in r1p*
+ teq r3, #0x00100000 @ only present in r1p*
mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
orreq r10, r10, #(1 << 6) @ set IBE to 1
mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
@@ -395,7 +395,7 @@ __v7_setup:
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
#endif
#ifdef CONFIG_ARM_ERRATA_743622
- teq r5, #0x00200000 @ only present in r2p*
+ teq r3, #0x00200000 @ only present in r2p*
mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register
orreq r10, r10, #1 << 6 @ set bit #6
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
@@ -425,10 +425,10 @@ __v7_setup:
mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate
#ifdef CONFIG_MMU
mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs
- v7_ttb_setup r10, r4, r8, r5 @ TTBCR, TTBRx setup
- ldr r5, =PRRR @ PRRR
+ v7_ttb_setup r10, r4, r5, r8, r3 @ TTBCR, TTBRx setup
+ ldr r3, =PRRR @ PRRR
ldr r6, =NMRR @ NMRR
- mcr p15, 0, r5, c10, c2, 0 @ write PRRR
+ mcr p15, 0, r3, c10, c2, 0 @ write PRRR
mcr p15, 0, r6, c10, c2, 1 @ write NMRR
#endif
dsb @ Complete invalidations
@@ -437,22 +437,22 @@ __v7_setup:
and r0, r0, #(0xf << 12) @ ThumbEE enabled field
teq r0, #(1 << 12) @ check if ThumbEE is present
bne 1f
- mov r5, #0
- mcr p14, 6, r5, c1, c0, 0 @ Initialize TEEHBR to 0
+ mov r3, #0
+ mcr p14, 6, r3, c1, c0, 0 @ Initialize TEEHBR to 0
mrc p14, 6, r0, c0, c0, 0 @ load TEECR
orr r0, r0, #1 @ set the 1st bit in order to
mcr p14, 6, r0, c0, c0, 0 @ stop userspace TEEHBR access
1:
#endif
- adr r5, v7_crval
- ldmia r5, {r5, r6}
+ adr r3, v7_crval
+ ldmia r3, {r3, r6}
ARM_BE8(orr r6, r6, #1 << 25) @ big-endian page tables
#ifdef CONFIG_SWP_EMULATE
- orr r5, r5, #(1 << 10) @ set SW bit in "clear"
+ orr r3, r3, #(1 << 10) @ set SW bit in "clear"
bic r6, r6, #(1 << 10) @ clear it in "mmuset"
#endif
mrc p15, 0, r0, c1, c0, 0 @ read control register
- bic r0, r0, r5 @ clear bits them
+ bic r0, r0, r3 @ clear bits them
orr r0, r0, r6 @ set them
THUMB( orr r0, r0, #1 << 30 ) @ Thumb exceptions
ret lr @ return to head.S:__ret