summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorDarrick J. Wong <darrick.wong@oracle.com>2013-02-22 04:42:55 +0400
committerLinus Torvalds <torvalds@linux-foundation.org>2013-02-22 05:22:20 +0400
commitffecfd1a72fccfcee3dabb99b9ecba9735318f90 (patch)
treea5c3caf67249ec811a2c2c95678d9349fd8e2412
parent13575ca14fcdacd1ad914d00bc63eb4d96280986 (diff)
downloadlinux-ffecfd1a72fccfcee3dabb99b9ecba9735318f90.tar.xz
block: optionally snapshot page contents to provide stable pages during write
This provides a band-aid to provide stable page writes on jbd without needing to backport the fixed locking and page writeback bit handling schemes of jbd2. The band-aid works by using bounce buffers to snapshot page contents instead of waiting. For those wondering about the ext3 bandage -- fixing the jbd locking (which was done as part of ext4dev years ago) is a lot of surgery, and setting PG_writeback on data pages when we actually hold the page lock dropped ext3 performance by nearly an order of magnitude. If we're going to migrate iscsi and raid to use stable page writes, the complaints about high latency will likely return. We might as well centralize their page snapshotting thing to one place. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Tested-by: Andy Lutomirski <luto@amacapital.net> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-rw-r--r--arch/tile/Kconfig6
-rw-r--r--block/blk-core.c8
-rw-r--r--fs/ext3/super.c1
-rw-r--r--include/uapi/linux/fs.h3
-rw-r--r--mm/Kconfig13
-rw-r--r--mm/bounce.c48
-rw-r--r--mm/page-writeback.c4
7 files changed, 70 insertions, 13 deletions
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig
index 1bb7ad4aeff4..b1e68f52029c 100644
--- a/arch/tile/Kconfig
+++ b/arch/tile/Kconfig
@@ -412,12 +412,6 @@ config TILE_USB
Provides USB host adapter support for the built-in EHCI and OHCI
interfaces on TILE-Gx chips.
-# USB OHCI needs the bounce pool since tilegx will often have more
-# than 4GB of memory, but we don't currently use the IOTLB to present
-# a 32-bit address to OHCI. So we need to use a bounce pool instead.
-config NEED_BOUNCE_POOL
- def_bool USB_OHCI_HCD
-
source "drivers/pci/hotplug/Kconfig"
endmenu
diff --git a/block/blk-core.c b/block/blk-core.c
index c973249d68cd..277134cb5d32 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1474,6 +1474,11 @@ void blk_queue_bio(struct request_queue *q, struct bio *bio)
*/
blk_queue_bounce(q, &bio);
+ if (bio_integrity_enabled(bio) && bio_integrity_prep(bio)) {
+ bio_endio(bio, -EIO);
+ return;
+ }
+
if (bio->bi_rw & (REQ_FLUSH | REQ_FUA)) {
spin_lock_irq(q->queue_lock);
where = ELEVATOR_INSERT_FLUSH;
@@ -1714,9 +1719,6 @@ generic_make_request_checks(struct bio *bio)
*/
blk_partition_remap(bio);
- if (bio_integrity_enabled(bio) && bio_integrity_prep(bio))
- goto end_io;
-
if (bio_check_eod(bio, nr_sectors))
goto end_io;
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 6e50223b3299..4ba2683c1d44 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -2065,6 +2065,7 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
test_opt(sb,DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA ? "journal":
test_opt(sb,DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA ? "ordered":
"writeback");
+ sb->s_flags |= MS_SNAP_STABLE;
return 0;
diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h
index 780d4c6093eb..c7fc1e6517c3 100644
--- a/include/uapi/linux/fs.h
+++ b/include/uapi/linux/fs.h
@@ -86,6 +86,9 @@ struct inodes_stat_t {
#define MS_KERNMOUNT (1<<22) /* this is a kern_mount call */
#define MS_I_VERSION (1<<23) /* Update inode I_version field */
#define MS_STRICTATIME (1<<24) /* Always perform atime updates */
+
+/* These sb flags are internal to the kernel */
+#define MS_SNAP_STABLE (1<<27) /* Snapshot pages during writeback, if needed */
#define MS_NOSEC (1<<28)
#define MS_BORN (1<<29)
#define MS_ACTIVE (1<<30)
diff --git a/mm/Kconfig b/mm/Kconfig
index 278e3ab1f169..7901d839aab2 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -258,6 +258,19 @@ config BOUNCE
def_bool y
depends on BLOCK && MMU && (ZONE_DMA || HIGHMEM)
+# On the 'tile' arch, USB OHCI needs the bounce pool since tilegx will often
+# have more than 4GB of memory, but we don't currently use the IOTLB to present
+# a 32-bit address to OHCI. So we need to use a bounce pool instead.
+#
+# We also use the bounce pool to provide stable page writes for jbd. jbd
+# initiates buffer writeback without locking the page or setting PG_writeback,
+# and fixing that behavior (a second time; jbd2 doesn't have this problem) is
+# a major rework effort. Instead, use the bounce buffer to snapshot pages
+# (until jbd goes away). The only jbd user is ext3.
+config NEED_BOUNCE_POOL
+ bool
+ default y if (TILE && USB_OHCI_HCD) || (BLK_DEV_INTEGRITY && JBD)
+
config NR_QUICK
int
depends on QUICKLIST
diff --git a/mm/bounce.c b/mm/bounce.c
index 042086775561..5f8901768602 100644
--- a/mm/bounce.c
+++ b/mm/bounce.c
@@ -178,8 +178,45 @@ static void bounce_end_io_read_isa(struct bio *bio, int err)
__bounce_end_io_read(bio, isa_page_pool, err);
}
+#ifdef CONFIG_NEED_BOUNCE_POOL
+static int must_snapshot_stable_pages(struct request_queue *q, struct bio *bio)
+{
+ struct page *page;
+ struct backing_dev_info *bdi;
+ struct address_space *mapping;
+ struct bio_vec *from;
+ int i;
+
+ if (bio_data_dir(bio) != WRITE)
+ return 0;
+
+ if (!bdi_cap_stable_pages_required(&q->backing_dev_info))
+ return 0;
+
+ /*
+ * Based on the first page that has a valid mapping, decide whether or
+ * not we have to employ bounce buffering to guarantee stable pages.
+ */
+ bio_for_each_segment(from, bio, i) {
+ page = from->bv_page;
+ mapping = page_mapping(page);
+ if (!mapping)
+ continue;
+ bdi = mapping->backing_dev_info;
+ return mapping->host->i_sb->s_flags & MS_SNAP_STABLE;
+ }
+
+ return 0;
+}
+#else
+static int must_snapshot_stable_pages(struct request_queue *q, struct bio *bio)
+{
+ return 0;
+}
+#endif /* CONFIG_NEED_BOUNCE_POOL */
+
static void __blk_queue_bounce(struct request_queue *q, struct bio **bio_orig,
- mempool_t *pool)
+ mempool_t *pool, int force)
{
struct page *page;
struct bio *bio = NULL;
@@ -192,7 +229,7 @@ static void __blk_queue_bounce(struct request_queue *q, struct bio **bio_orig,
/*
* is destination page below bounce pfn?
*/
- if (page_to_pfn(page) <= queue_bounce_pfn(q))
+ if (page_to_pfn(page) <= queue_bounce_pfn(q) && !force)
continue;
/*
@@ -270,6 +307,7 @@ static void __blk_queue_bounce(struct request_queue *q, struct bio **bio_orig,
void blk_queue_bounce(struct request_queue *q, struct bio **bio_orig)
{
+ int must_bounce;
mempool_t *pool;
/*
@@ -278,13 +316,15 @@ void blk_queue_bounce(struct request_queue *q, struct bio **bio_orig)
if (!bio_has_data(*bio_orig))
return;
+ must_bounce = must_snapshot_stable_pages(q, *bio_orig);
+
/*
* for non-isa bounce case, just check if the bounce pfn is equal
* to or bigger than the highest pfn in the system -- in that case,
* don't waste time iterating over bio segments
*/
if (!(q->bounce_gfp & GFP_DMA)) {
- if (queue_bounce_pfn(q) >= blk_max_pfn)
+ if (queue_bounce_pfn(q) >= blk_max_pfn && !must_bounce)
return;
pool = page_pool;
} else {
@@ -295,7 +335,7 @@ void blk_queue_bounce(struct request_queue *q, struct bio **bio_orig)
/*
* slow path
*/
- __blk_queue_bounce(q, bio_orig, pool);
+ __blk_queue_bounce(q, bio_orig, pool, must_bounce);
}
EXPORT_SYMBOL(blk_queue_bounce);
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 355d5ee69058..7300c9d5e1d9 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -2306,6 +2306,10 @@ void wait_for_stable_page(struct page *page)
if (!bdi_cap_stable_pages_required(bdi))
return;
+#ifdef CONFIG_NEED_BOUNCE_POOL
+ if (mapping->host->i_sb->s_flags & MS_SNAP_STABLE)
+ return;
+#endif /* CONFIG_NEED_BOUNCE_POOL */
wait_on_page_writeback(page);
}