Merge tag 'char-misc-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the large set of char/misc and other driver subsystem changes
  for 6.2-rc1. Nothing earth-shattering in here at all, just a lot of
  new driver development and minor fixes.

  Highlights include:

   - fastrpc driver updates

   - iio new drivers and updates

   - habanalabs driver updates for new hardware and features

   - slimbus driver updates

   - speakup module parameters added to aid in boot time configuration

   - i2c probe_new conversions for lots of different drivers

   - other small driver fixes and additions

  One semi-interesting change in here is the increase of the number of
  misc dynamic minors available to 1048448 to handle new huge-cpu
  systems.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'char-misc-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (521 commits)
  extcon: usbc-tusb320: Convert to i2c's .probe_new()
  extcon: rt8973: Convert to i2c's .probe_new()
  extcon: fsa9480: Convert to i2c's .probe_new()
  extcon: max77843: Replace irqchip mask_invert with unmask_base
  chardev: fix error handling in cdev_device_add()
  mcb: mcb-parse: fix error handing in chameleon_parse_gdd()
  drivers: mcb: fix resource leak in mcb_probe()
  coresight: etm4x: fix repeated words in comments
  coresight: cti: Fix null pointer error on CTI init before ETM
  coresight: trbe: remove cpuhp instance node before remove cpuhp state
  counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update
  misc: fastrpc: Add dma_mask to fastrpc_channel_ctx
  misc: fastrpc: Add mmap request assigning for static PD pool
  misc: fastrpc: Safekeep mmaps on interrupted invoke
  misc: fastrpc: Add support for audiopd
  misc: fastrpc: Rework fastrpc_req_munmap
  misc: fastrpc: Use fastrpc_map_put in fastrpc_map_create on fail
  misc: fastrpc: Add fastrpc_remote_heap_alloc
  misc: fastrpc: Add reserved mem support
  misc: fastrpc: Rename audio protection domain to root
  ...

1 files changed, 81 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml b/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml
new file mode 100644
index 000000000000..4fb05eb84e2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/lattice,sysconfig.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lattice Slave SPI sysCONFIG FPGA manager
+
+maintainers:
+  - Ivan Bornyakov <i.bornyakov@metrotek.ru>
+
+description: |
+  Lattice sysCONFIG port, which is used for FPGA configuration, among others,
+  have Slave Serial Peripheral Interface. Only full reconfiguration is
+  supported.
+
+  Programming of ECP5 is done by writing uncompressed bitstream image in .bit
+  format into FPGA's SRAM configuration memory.
+
+properties:
+  compatible:
+    enum:
+      - lattice,sysconfig-ecp5
+
+  reg:
+    maxItems: 1
+
+  program-gpios:
+    description:
+      A GPIO line connected to PROGRAMN (active low) pin of the device.
+      Initiates configuration sequence.
+    maxItems: 1
+
+  init-gpios:
+    description:
+      A GPIO line connected to INITN (active low) pin of the device.
+      Indicates that the FPGA is ready to be configured.
+    maxItems: 1
+
+  done-gpios:
+    description:
+      A GPIO line connected to DONE (active high) pin of the device.
+      Indicates that the configuration sequence is complete.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: lattice,sysconfig-ecp5
+    then:
+      properties:
+        spi-max-frequency:
+          maximum: 60000000
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fpga-mgr@0 {
+            compatible = "lattice,sysconfig-ecp5";
+            reg = <0>;
+            spi-max-frequency = <20000000>;
+            program-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
+            init-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
+            done-gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>;
+        };
+    };