Merge branch 'i2c/for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
 "I2C has the following changes for you:

   - new flag to mark DMA safe buffers in i2c_msg. Also, some
     infrastructure around it. And docs.

   - huge refactoring of the at24 driver led by the new maintainer
     Bartosz

   - update I2C bus recovery to send STOP after recovery

   - conversion from gpio to gpiod for I2C bus recovery

   - adding a fault-injector to the i2c-gpio driver

   - lots of small driver improvements, and bigger ones to
     i2c-sh_mobile"

* 'i2c/for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (99 commits)
  i2c: mv64xxx: Add myself as maintainer for this driver
  i2c: mv64xxx: Fix clock resource by adding an optional bus clock
  i2c: mv64xxx: Remove useless test before clk_disable_unprepare
  i2c: mxs: use true and false for boolean values
  i2c: meson: update doc description to fix build warnings
  i2c: meson: add configurable divider factors
  dt-bindings: i2c: update documentation for the Meson-AXG
  i2c: imx-lpi2c: add runtime pm support
  i2c: rcar: fix some trivial typos in comments
  i2c: davinci: fix the cpufreq transition
  i2c: rk3x: add proper kerneldoc header
  i2c: rk3x: account for const type of of_device_id.data
  i2c: acorn: remove outdated path from file header
  i2c: acorn: add MODULE_LICENSE tag
  i2c: rcar: implement bus recovery
  i2c: send STOP after successful bus recovery
  i2c: ensure SDA is released in recovery if SDA is controllable
  i2c: add 'set_sda' to bus_recovery_info
  i2c: add identifier in declarations for i2c_bus_recovery
  i2c: make kerneldoc about bus recovery more precise
  ...

4 files changed, 37 insertions, 3 deletions

diff --git a/Documentation/devicetree/bindings/i2c/i2c-meson.txt b/Documentation/devicetree/bindings/i2c/i2c-meson.txt
index 611b934c7e10..13d410de077c 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-meson.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-meson.txt
@@ -1,7 +1,11 @@
 Amlogic Meson I2C controller
 
 Required properties:
- - compatible: must be "amlogic,meson6-i2c" or "amlogic,meson-gxbb-i2c"
+ - compatible: must be:
+	"amlogic,meson6-i2c" for Meson8 and compatible SoCs
+	"amlogic,meson-gxbb-i2c" for GXBB and compatible SoCs
+	"amlogic,meson-axg-i2c"for AXG and compatible SoCs
+
  - reg: physical address and length of the device registers
  - interrupts: a single interrupt specifier
  - clocks: clock for the device
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mtk.txt b/Documentation/devicetree/bindings/i2c/i2c-mtk.txt
index ff7bf37deb43..e199695b1c96 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mtk.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mtk.txt
@@ -5,6 +5,7 @@ The MediaTek's I2C controller is used to interface with I2C devices.
 Required properties:
   - compatible: value should be either of the following.
       "mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for MediaTek MT2701
+      "mediatek,mt2712-i2c": for MediaTek MT2712
       "mediatek,mt6577-i2c": for MediaTek MT6577
       "mediatek,mt6589-i2c": for MediaTek MT6589
       "mediatek,mt7622-i2c": for MediaTek MT7622
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
index aa097045a10e..34d91501342e 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
@@ -1,10 +1,19 @@
 * NXP PCA954x I2C bus switch
 
+The driver supports NXP PCA954x and PCA984x I2C mux/switch devices.
+
 Required Properties:
 
   - compatible: Must contain one of the following.
-    "nxp,pca9540", "nxp,pca9542", "nxp,pca9543", "nxp,pca9544",
-    "nxp,pca9545", "nxp,pca9546", "nxp,pca9547", "nxp,pca9548"
+    "nxp,pca9540",
+    "nxp,pca9542",
+    "nxp,pca9543",
+    "nxp,pca9544",
+    "nxp,pca9545",
+    "nxp,pca9546", "nxp,pca9846",
+    "nxp,pca9547", "nxp,pca9847",
+    "nxp,pca9548", "nxp,pca9848",
+    "nxp,pca9849"
 
   - reg: The I2C address of the device.
 
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
index 5c30026921ae..0ffe65a316ae 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
@@ -25,6 +25,15 @@ default frequency is 100kHz
                      whenever you're using the "allwinner,sun6i-a31-i2c"
                      compatible.
 
+ - clocks:	   : pointers to the reference clocks for this device, the
+		     first one is the one used for the clock on the i2c bus,
+		     the second one is the clock used to acces the registers
+		     of the controller
+
+ - clock-names	   : names of used clocks, mandatory if the second clock is
+		     used, the name must be "core", and "reg" (the latter is
+		     only for Armada 7K/8K).
+
 Examples:
 
 	i2c@11000 {
@@ -42,3 +51,14 @@ For the Armada XP:
 		interrupts = <29>;
 		clock-frequency = <100000>;
 	};
+
+For the Armada 7040:
+
+	i2c@701000 {
+		compatible = "marvell,mv78230-i2c";
+		reg = <0x701000 0x20>;
+		interrupts = <29>;
+		clock-frequency = <100000>;
+		clock-names = "core", "reg";
+		clocks = <&core_clock>, <&reg_clock>;
+	};