diff options
author | Marek Vasut <marex@denx.de> | 2022-09-28 21:19:44 +0300 |
---|---|---|
committer | Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> | 2022-10-18 20:05:18 +0300 |
commit | a11a5debdf4b5b5c24e88a378b53b42cc4fe1bb9 (patch) | |
tree | 26fa709d595824715c472342ed099103c4ab5258 /Documentation/devicetree/bindings/memory-controllers | |
parent | 4985a54552e7342a4a0073245ed1f4829961fb8e (diff) | |
download | linux-a11a5debdf4b5b5c24e88a378b53b42cc4fe1bb9.tar.xz |
dt-bindings: memory-controller: st,stm32: Split off MC properties
Split st,stm32-fmc2-ebi.yaml specific properties into
st,stm32-fmc2-ebi-props.yaml, split memory-controller bus peripheral
properties into mc-peripheral-props.yaml, reference the
st,stm32-fmc2-ebi-props.yaml in mc-peripheral-props.yaml and reference
the mc-peripheral-props.yaml in micrel,ks8851.yaml.
This way, the FMC2 controller properties in Micrel KSZ8851MLL ethernet
controller node can be properly validated.
Fixes the following warning:
arch/arm/boot/dts/stm32mp153c-dhcor-drc-compact.dtb: ethernet@1,0:
Unevaluated properties are not allowed ('bank-width', 'st,fmc2-ebi-cs-mux-enable', ... 'st,fmc2-ebi-cs-write-data-hold-ns' were unexpected)
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220928181944.194808-1-marex@denx.de
[krzk: trim warning message]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Diffstat (limited to 'Documentation/devicetree/bindings/memory-controllers')
3 files changed, 183 insertions, 137 deletions
diff --git a/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml b/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml new file mode 100644 index 000000000000..53ae995462db --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/mc-peripheral-props.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Peripheral-specific properties for a Memory Controller bus. + +description: + Many Memory Controllers need to add properties to peripheral devices. + They could be common properties like reg or they could be controller + specific like delay in clock or data lines, etc. These properties need + to be defined in the peripheral node because they are per-peripheral + and there can be multiple peripherals attached to a controller. All + those properties are listed here. The controller specific properties + should go in their own separate schema that should be referenced + from here. + +maintainers: + - Marek Vasut <marex@denx.de> + +properties: + reg: + description: Bank number, base address and size of the device. + + bank-width: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Bank width of the device, in bytes. + enum: [1, 2, 4] + +required: + - reg + +# The controller specific properties go here. +allOf: + - $ref: st,stm32-fmc2-ebi-props.yaml# + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi-props.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi-props.yaml new file mode 100644 index 000000000000..475e4095068c --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi-props.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/st,stm32-fmc2-ebi-props.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Peripheral properties for ST FMC2 Controller + +maintainers: + - Christophe Kerello <christophe.kerello@foss.st.com> + - Marek Vasut <marex@denx.de> + +properties: + st,fmc2-ebi-cs-transaction-type: + description: | + Select one of the transactions type supported + 0: Asynchronous mode 1 SRAM/FRAM. + 1: Asynchronous mode 1 PSRAM. + 2: Asynchronous mode A SRAM/FRAM. + 3: Asynchronous mode A PSRAM. + 4: Asynchronous mode 2 NOR. + 5: Asynchronous mode B NOR. + 6: Asynchronous mode C NOR. + 7: Asynchronous mode D NOR. + 8: Synchronous read synchronous write PSRAM. + 9: Synchronous read asynchronous write PSRAM. + 10: Synchronous read synchronous write NOR. + 11: Synchronous read asynchronous write NOR. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 11 + + st,fmc2-ebi-cs-cclk-enable: + description: Continuous clock enable (first bank must be configured + in synchronous mode). The FMC_CLK is generated continuously + during asynchronous and synchronous access. By default, the + FMC_CLK is only generated during synchronous access. + $ref: /schemas/types.yaml#/definitions/flag + + st,fmc2-ebi-cs-mux-enable: + description: Address/Data multiplexed on databus (valid only with + NOR and PSRAM transactions type). By default, Address/Data + are not multiplexed. + $ref: /schemas/types.yaml#/definitions/flag + + st,fmc2-ebi-cs-buswidth: + description: Data bus width + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 8, 16 ] + default: 16 + + st,fmc2-ebi-cs-waitpol-high: + description: Wait signal polarity (NWAIT signal active high). + By default, NWAIT is active low. + $ref: /schemas/types.yaml#/definitions/flag + + st,fmc2-ebi-cs-waitcfg-enable: + description: The NWAIT signal indicates wheither the data from the + device are valid or if a wait state must be inserted when accessing + the device in synchronous mode. By default, the NWAIT signal is + active one data cycle before wait state. + $ref: /schemas/types.yaml#/definitions/flag + + st,fmc2-ebi-cs-wait-enable: + description: The NWAIT signal is enabled (its level is taken into + account after the programmed latency period to insert wait states + if asserted). By default, the NWAIT signal is disabled. + $ref: /schemas/types.yaml#/definitions/flag + + st,fmc2-ebi-cs-asyncwait-enable: + description: The NWAIT signal is taken into account during asynchronous + transactions. By default, the NWAIT signal is not taken into account + during asynchronous transactions. + $ref: /schemas/types.yaml#/definitions/flag + + st,fmc2-ebi-cs-cpsize: + description: CRAM page size. The controller splits the burst access + when the memory page is reached. By default, no burst split when + crossing page boundary. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 128, 256, 512, 1024 ] + default: 0 + + st,fmc2-ebi-cs-byte-lane-setup-ns: + description: This property configures the byte lane setup timing + defined in nanoseconds from NBLx low to Chip Select NEx low. + + st,fmc2-ebi-cs-address-setup-ns: + description: This property defines the duration of the address setup + phase in nanoseconds used for asynchronous read/write transactions. + + st,fmc2-ebi-cs-address-hold-ns: + description: This property defines the duration of the address hold + phase in nanoseconds used for asynchronous multiplexed read/write + transactions. + + st,fmc2-ebi-cs-data-setup-ns: + description: This property defines the duration of the data setup phase + in nanoseconds used for asynchronous read/write transactions. + + st,fmc2-ebi-cs-bus-turnaround-ns: + description: This property defines the delay in nanoseconds between the + end of current read/write transaction and the next transaction. + + st,fmc2-ebi-cs-data-hold-ns: + description: This property defines the duration of the data hold phase + in nanoseconds used for asynchronous read/write transactions. + + st,fmc2-ebi-cs-clk-period-ns: + description: This property defines the FMC_CLK output signal period in + nanoseconds. + + st,fmc2-ebi-cs-data-latency-ns: + description: This property defines the data latency before reading or + writing the first data in nanoseconds. + + st,fmc2-ebi-cs-write-address-setup-ns: + description: This property defines the duration of the address setup + phase in nanoseconds used for asynchronous write transactions. + + st,fmc2-ebi-cs-write-address-hold-ns: + description: This property defines the duration of the address hold + phase in nanoseconds used for asynchronous multiplexed write + transactions. + + st,fmc2-ebi-cs-write-data-setup-ns: + description: This property defines the duration of the data setup + phase in nanoseconds used for asynchronous write transactions. + + st,fmc2-ebi-cs-write-bus-turnaround-ns: + description: This property defines the delay between the end of current + write transaction and the next transaction in nanoseconds. + + st,fmc2-ebi-cs-write-data-hold-ns: + description: This property defines the duration of the data hold phase + in nanoseconds used for asynchronous write transactions. + + st,fmc2-ebi-cs-max-low-pulse-ns: + description: This property defines the maximum chip select low pulse + duration in nanoseconds for synchronous transactions. When this timing + reaches 0, the controller splits the current access, toggles NE to + allow device refresh and restarts a new access. + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml index a1f535cececc..d71af02b7f16 100644 --- a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml @@ -48,143 +48,7 @@ properties: patternProperties: "^.*@[0-4],[a-f0-9]+$": type: object - - properties: - reg: - description: Bank number, base address and size of the device. - - st,fmc2-ebi-cs-transaction-type: - description: | - Select one of the transactions type supported - 0: Asynchronous mode 1 SRAM/FRAM. - 1: Asynchronous mode 1 PSRAM. - 2: Asynchronous mode A SRAM/FRAM. - 3: Asynchronous mode A PSRAM. - 4: Asynchronous mode 2 NOR. - 5: Asynchronous mode B NOR. - 6: Asynchronous mode C NOR. - 7: Asynchronous mode D NOR. - 8: Synchronous read synchronous write PSRAM. - 9: Synchronous read asynchronous write PSRAM. - 10: Synchronous read synchronous write NOR. - 11: Synchronous read asynchronous write NOR. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 11 - - st,fmc2-ebi-cs-cclk-enable: - description: Continuous clock enable (first bank must be configured - in synchronous mode). The FMC_CLK is generated continuously - during asynchronous and synchronous access. By default, the - FMC_CLK is only generated during synchronous access. - $ref: /schemas/types.yaml#/definitions/flag - - st,fmc2-ebi-cs-mux-enable: - description: Address/Data multiplexed on databus (valid only with - NOR and PSRAM transactions type). By default, Address/Data - are not multiplexed. - $ref: /schemas/types.yaml#/definitions/flag - - st,fmc2-ebi-cs-buswidth: - description: Data bus width - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [ 8, 16 ] - default: 16 - - st,fmc2-ebi-cs-waitpol-high: - description: Wait signal polarity (NWAIT signal active high). - By default, NWAIT is active low. - $ref: /schemas/types.yaml#/definitions/flag - - st,fmc2-ebi-cs-waitcfg-enable: - description: The NWAIT signal indicates wheither the data from the - device are valid or if a wait state must be inserted when accessing - the device in synchronous mode. By default, the NWAIT signal is - active one data cycle before wait state. - $ref: /schemas/types.yaml#/definitions/flag - - st,fmc2-ebi-cs-wait-enable: - description: The NWAIT signal is enabled (its level is taken into - account after the programmed latency period to insert wait states - if asserted). By default, the NWAIT signal is disabled. - $ref: /schemas/types.yaml#/definitions/flag - - st,fmc2-ebi-cs-asyncwait-enable: - description: The NWAIT signal is taken into account during asynchronous - transactions. By default, the NWAIT signal is not taken into account - during asynchronous transactions. - $ref: /schemas/types.yaml#/definitions/flag - - st,fmc2-ebi-cs-cpsize: - description: CRAM page size. The controller splits the burst access - when the memory page is reached. By default, no burst split when - crossing page boundary. - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [ 0, 128, 256, 512, 1024 ] - default: 0 - - st,fmc2-ebi-cs-byte-lane-setup-ns: - description: This property configures the byte lane setup timing - defined in nanoseconds from NBLx low to Chip Select NEx low. - - st,fmc2-ebi-cs-address-setup-ns: - description: This property defines the duration of the address setup - phase in nanoseconds used for asynchronous read/write transactions. - - st,fmc2-ebi-cs-address-hold-ns: - description: This property defines the duration of the address hold - phase in nanoseconds used for asynchronous multiplexed read/write - transactions. - - st,fmc2-ebi-cs-data-setup-ns: - description: This property defines the duration of the data setup phase - in nanoseconds used for asynchronous read/write transactions. - - st,fmc2-ebi-cs-bus-turnaround-ns: - description: This property defines the delay in nanoseconds between the - end of current read/write transaction and the next transaction. - - st,fmc2-ebi-cs-data-hold-ns: - description: This property defines the duration of the data hold phase - in nanoseconds used for asynchronous read/write transactions. - - st,fmc2-ebi-cs-clk-period-ns: - description: This property defines the FMC_CLK output signal period in - nanoseconds. - - st,fmc2-ebi-cs-data-latency-ns: - description: This property defines the data latency before reading or - writing the first data in nanoseconds. - - st,fmc2-ebi-cs-write-address-setup-ns: - description: This property defines the duration of the address setup - phase in nanoseconds used for asynchronous write transactions. - - st,fmc2-ebi-cs-write-address-hold-ns: - description: This property defines the duration of the address hold - phase in nanoseconds used for asynchronous multiplexed write - transactions. - - st,fmc2-ebi-cs-write-data-setup-ns: - description: This property defines the duration of the data setup - phase in nanoseconds used for asynchronous write transactions. - - st,fmc2-ebi-cs-write-bus-turnaround-ns: - description: This property defines the delay between the end of current - write transaction and the next transaction in nanoseconds. - - st,fmc2-ebi-cs-write-data-hold-ns: - description: This property defines the duration of the data hold phase - in nanoseconds used for asynchronous write transactions. - - st,fmc2-ebi-cs-max-low-pulse-ns: - description: This property defines the maximum chip select low pulse - duration in nanoseconds for synchronous transactions. When this timing - reaches 0, the controller splits the current access, toggles NE to - allow device refresh and restarts a new access. - - required: - - reg + $ref: mc-peripheral-props.yaml# required: - "#address-cells" |