Merge tag 'mmc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Enable erase/discard/trim support for all (e)MMC/SD hosts
   - Export information through sysfs about enhanced RPMB support (eMMC v5.1+)
   - Align the initialization commands for SDIO cards
   - Fix SDIO initialization to prevent memory leaks and NULL pointer errors
   - Do not export undefined MMC_NAME/MODALIAS for SDIO cards
   - Export device/vendor field from common CIS for SDIO cards
   - Move SDIO IDs from functional drivers to the common SDIO header
   - Introduce the ->request_atomic() host ops

  MMC host:
   - Improve support for HW busy signaling for several hosts
   - Converting some DT bindings to the json-schema
   - meson-mx-sdhc: Add driver and DT doc for the Amlogic Meson SDHC controller
   - meson-mx-sdio: Run a soft reset to recover from timeout/CRC error
   - mmci: Convert to use mmc_regulator_set_vqmmc()
   - mmci_stm32_sdmmc: Fix a couple of DMA bugs
   - mmci_stm32_sdmmc: Fix power on issue
   - renesas,mmcif,sdhci: Document r8a7742 DT bindings
   - renesas_sdhi: Add support for M3-W ES1.2 and 1.3 revisions
   - renesas_sdhi: Improvements to the TAP selection
   - renesas_sdhi/tmio: Further fixup runtime PM management at ->remove()
   - sdhci: Introduce ops to dump vendor specific registers
   - sdhci-cadence: Fix PHY write sequence
   - sdhci-esdhc-imx: Improve tunings
   - sdhci-esdhc-imx: Enable GPIO card detect as system wakeup
   - sdhci-esdhc-imx: Add HS400 support for i.MX6SLL
   - sdhci-esdhc-mcf: Add driver for the Coldfire/M5441X esdhc controller
   - m68k: mcf5441x: Add platform data to enable esdhc mmc controller
   - sdhci-msm: Improve HS400 tuning
   - sdhci-msm: Dump vendor specific registers at error
   - sdhci-msm: Add support for DLL/DDR properties provided from DT
   - sdhci-msm: Add support for the sm8250 variant
   - sdhci-msm: Add support for DVFS by converting to dev_pm_opp_set_rate()
   - sdhci-of-arasan: Add support for Intel Keem Bay variant
   - sdhci-of-arasan: Add support for Xilinx Versal SD variant
   - sdhci-of-dwcmshc: Add support for system suspend/resume
   - sdhci-of-dwcmshc: Fix UHS signaling support
   - sdhci-of-esdhc: Fix tuning for eMMC HS400 mode
   - sdhci-pci-gli: Add Genesys Logic GL9763E support
   - sdhci-sprd: Add support for the ->request_atomic() ops
   - sdhci-tegra: Avoid reading autocal timeout values when not applicable

  MEMSTICK:
   - Minor trivial update"

* tag 'mmc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (127 commits)
  dt-bindings: mmc: Convert sdhci-pxa to json-schema
  mmc: sdhci-msm: Clear tuning done flag while hs400 tuning
  mmc: core: Export device/vendor ids from Common CIS for SDIO cards
  mmc: core: Do not export MMC_NAME= and MODALIAS=mmc:block for SDIO cards
  mmc: sdhci-of-at91: fix CALCR register being rewritten
  mmc: sdhci-esdhc-imx: disable the CMD CRC check for standard tuning
  mmc: sdhci-esdhc-imx: fix the mask for tuning start point
  mmc: host: sdhci-esdhc-imx: add wakeup feature for GPIO CD pin
  mmc: mmci_sdmmc: fix DMA API warning max segment size
  mmc: mmci_sdmmc: fix DMA API warning overlapping mappings
  mmc: sdhci-of-arasan: Add support for Intel Keem Bay
  dt-bindings: mmc: arasan: Add compatible strings for Intel Keem Bay
  mmc: sdhci-cadence: fix PHY write
  mmc: sdio: Sort all SDIO IDs in common include file
  mmc: sdio: Fix Cypress SDIO IDs macros in common include file
  mmc: sdio: Move SDIO IDs from b43-sdio driver to common include file
  mmc: sdio: Move SDIO IDs from ath10k driver to common include file
  mmc: sdio: Move SDIO IDs from ath6kl driver to common include file
  mmc: sdio: Move SDIO IDs from smssdio driver to common include file
  mmc: sdio: Move SDIO IDs from btmtksdio driver to common include file
  ...

1 files changed, 0 insertions, 50 deletions

diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
deleted file mode 100644
index 3d1b449d6097..000000000000
--- a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-* Marvell sdhci-pxa v2/v3 controller
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the sdhci-pxav2 and sdhci-pxav3 drivers.
-
-Required properties:
-- compatible: Should be "mrvl,pxav2-mmc", "mrvl,pxav3-mmc" or
-  "marvell,armada-380-sdhci".
-- reg:
-  * for "mrvl,pxav2-mmc" and "mrvl,pxav3-mmc", one register area for
-    the SDHCI registers.
-
-  * for "marvell,armada-380-sdhci", three register areas. The first
-    one for the SDHCI registers themselves, the second one for the
-    AXI/Mbus bridge registers of the SDHCI unit, the third one for the
-    SDIO3 Configuration register
-- reg names: should be "sdhci", "mbus", "conf-sdio3". only mandatory
-  for "marvell,armada-380-sdhci"
-- clocks: Array of clocks required for SDHCI; requires at least one for
-    I/O clock.
-- clock-names: Array of names corresponding to clocks property; shall be
-    "io" for I/O clock and "core" for optional core clock.
-
-Optional properties:
-- mrvl,clk-delay-cycles: Specify a number of cycles to delay for tuning.
-
-Example:
-
-sdhci@d4280800 {
-	compatible = "mrvl,pxav3-mmc";
-	reg = <0xd4280800 0x800>;
-	bus-width = <8>;
-	interrupts = <27>;
-	clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
-	clock-names = "io", "core";
-	non-removable;
-	mrvl,clk-delay-cycles = <31>;
-};
-
-sdhci@d8000 {
-	compatible = "marvell,armada-380-sdhci";
-	reg-names = "sdhci", "mbus", "conf-sdio3";
-	reg = <0xd8000 0x1000>,
-		<0xdc000 0x100>;
-		<0x18454 0x4>;
-	interrupts = <0 25 0x4>;
-	clocks = <&gateclk 17>;
-	clock-names = "io";
-	mrvl,clk-delay-cycles = <0x1F>;
-};