Merge tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull Devicetree updates from Rob Herring:

 - DT schemas for PWM, syscon, power domains, SRAM, syscon-reboot,
   syscon-poweroff, renesas-irqc, simple-pm-bus, renesas-bsc, pwm-rcar,
   Renesas tpu, at24 eeprom, rtc-sh, Allwinner PS/2, sharp,ld-d5116z01b
   panel, Arm SMMU, max77650, Meson CEC, Amlogic canvas and DWC3 glue,
   Allwinner A10 mUSB and CAN, TI Davinci MDIO, QCom QCS404
   interconnect, Unisoc/Spreadtrum SoCs and UART

 - Convert a bunch of Samsung bindings to DT schema

 - Convert a bunch of ST stm32 bindings to DT schema

 - Realtek and Exynos additions to Arm Mali bindings

 - Fix schema errors in RiscV CPU schema

 - Various schema fixes from improved meta-schema checks

 - Improve the handling of 'dma-ranges' and in particular fix DMA mask
   setup on PCI bridges

 - Fix a memory leak in add_changeset_property() and DT unit tests.

 - Several documentation improvements for schema validation

 - Rework build rules to improve schema validation errors

 - Color output for dtx_diff

* tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (138 commits)
  libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h
  dt-bindings: arm: Remove leftover axentia.txt
  of: unittest: fix memory leak in attach_node_and_children
  of: overlay: add_changeset_property() memory leak
  dt-bindings: interrupt-controller: arm,gic-v3: Add missing type to interrupt-partition-* nodes
  dt-bindings: firmware: ixp4xx: Drop redundant minItems/maxItems
  dt-bindings: power: Rename back power_domain.txt bindings to fix references
  dt-bindings: i2c: stm32: Migrate i2c-stm32 documentation to yaml
  dt-bindings: mtd: Convert stm32 fmc2-nand bindings to json-schema
  dt-bindings: remoteproc: convert stm32-rproc to json-schema
  dt-bindings: mailbox: convert stm32-ipcc to json-schema
  dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema
  dt-bindings: interrupt-controller: Convert stm32-exti to json-schema
  dt-bindings: crypto: Convert stm32 HASH bindings to json-schema
  dt-bindings: rng: Convert stm32 RNG bindings to json-schema
  dt-bindings: pwm: Convert Samsung PWM bindings to json-schema
  dt-bindings: pwm: Convert PWM bindings to json-schema
  dt-bindings: serial: Add a new compatible string for SC9863A
  dt-bindings: serial: Convert sprd-uart to json-schema
  dt-bindings: arm: Add bindings for Unisoc SC9863A
  ...

1 files changed, 0 insertions, 51 deletions

diff --git a/Documentation/devicetree/bindings/pwm/pwm-samsung.txt b/Documentation/devicetree/bindings/pwm/pwm-samsung.txt
deleted file mode 100644
index 5538de9c2007..000000000000
--- a/Documentation/devicetree/bindings/pwm/pwm-samsung.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-* Samsung PWM timers
-
-Samsung SoCs contain PWM timer blocks which can be used for system clock source
-and clock event timers, as well as to drive SoC outputs with PWM signal. Each
-PWM timer block provides 5 PWM channels (not all of them can drive physical
-outputs - see SoC and board manual).
-
-Be aware that the clocksource driver supports only uniprocessor systems.
-
-Required properties:
-- compatible : should be one of following:
-    samsung,s3c2410-pwm - for 16-bit timers present on S3C24xx SoCs
-    samsung,s3c6400-pwm - for 32-bit timers present on S3C64xx SoCs
-    samsung,s5p6440-pwm - for 32-bit timers present on S5P64x0 SoCs
-    samsung,s5pc100-pwm - for 32-bit timers present on S5PC100, S5PV210,
-			  Exynos4210 rev0 SoCs
-    samsung,exynos4210-pwm - for 32-bit timers present on Exynos4210,
-                          Exynos4x12, Exynos5250 and Exynos5420 SoCs
-- reg: base address and size of register area
-- interrupts: list of timer interrupts (one interrupt per timer, starting at
-  timer 0)
-- clock-names: should contain all following required clock names:
-    - "timers" - PWM base clock used to generate PWM signals,
-  and any subset of following optional clock names:
-    - "pwm-tclk0" - first external PWM clock source,
-    - "pwm-tclk1" - second external PWM clock source.
-  Note that not all IP variants allow using all external clock sources.
-  Refer to SoC documentation to learn which clock source configurations
-  are available.
-- clocks: should contain clock specifiers of all clocks, which input names
-  have been specified in clock-names property, in same order.
-- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
-  the cells format. The only third cell flag supported by this binding is
-  PWM_POLARITY_INVERTED.
-
-Optional properties:
-- samsung,pwm-outputs: list of PWM channels used as PWM outputs on particular
-    platform - an array of up to 5 elements being indices of PWM channels
-    (from 0 to 4), the order does not matter.
-
-Example:
-	pwm@7f006000 {
-		compatible = "samsung,s3c6400-pwm";
-		reg = <0x7f006000 0x1000>;
-		interrupt-parent = <&vic0>;
-		interrupts = <23>, <24>, <25>, <27>, <28>;
-		clocks = <&clock 67>;
-		clock-names = "timers";
-		samsung,pwm-outputs = <0>, <1>;
-		#pwm-cells = <3>;
-	}