Merge tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull Devicetree updates from Rob Herring:

 - DT schemas for PWM, syscon, power domains, SRAM, syscon-reboot,
   syscon-poweroff, renesas-irqc, simple-pm-bus, renesas-bsc, pwm-rcar,
   Renesas tpu, at24 eeprom, rtc-sh, Allwinner PS/2, sharp,ld-d5116z01b
   panel, Arm SMMU, max77650, Meson CEC, Amlogic canvas and DWC3 glue,
   Allwinner A10 mUSB and CAN, TI Davinci MDIO, QCom QCS404
   interconnect, Unisoc/Spreadtrum SoCs and UART

 - Convert a bunch of Samsung bindings to DT schema

 - Convert a bunch of ST stm32 bindings to DT schema

 - Realtek and Exynos additions to Arm Mali bindings

 - Fix schema errors in RiscV CPU schema

 - Various schema fixes from improved meta-schema checks

 - Improve the handling of 'dma-ranges' and in particular fix DMA mask
   setup on PCI bridges

 - Fix a memory leak in add_changeset_property() and DT unit tests.

 - Several documentation improvements for schema validation

 - Rework build rules to improve schema validation errors

 - Color output for dtx_diff

* tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (138 commits)
  libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h
  dt-bindings: arm: Remove leftover axentia.txt
  of: unittest: fix memory leak in attach_node_and_children
  of: overlay: add_changeset_property() memory leak
  dt-bindings: interrupt-controller: arm,gic-v3: Add missing type to interrupt-partition-* nodes
  dt-bindings: firmware: ixp4xx: Drop redundant minItems/maxItems
  dt-bindings: power: Rename back power_domain.txt bindings to fix references
  dt-bindings: i2c: stm32: Migrate i2c-stm32 documentation to yaml
  dt-bindings: mtd: Convert stm32 fmc2-nand bindings to json-schema
  dt-bindings: remoteproc: convert stm32-rproc to json-schema
  dt-bindings: mailbox: convert stm32-ipcc to json-schema
  dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema
  dt-bindings: interrupt-controller: Convert stm32-exti to json-schema
  dt-bindings: crypto: Convert stm32 HASH bindings to json-schema
  dt-bindings: rng: Convert stm32 RNG bindings to json-schema
  dt-bindings: pwm: Convert Samsung PWM bindings to json-schema
  dt-bindings: pwm: Convert PWM bindings to json-schema
  dt-bindings: serial: Add a new compatible string for SC9863A
  dt-bindings: serial: Convert sprd-uart to json-schema
  dt-bindings: arm: Add bindings for Unisoc SC9863A
  ...

1 files changed, 118 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
new file mode 100644
index 000000000000..9d2ce347875b
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/samsung_uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C, S5P and Exynos SoC UART Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+description: |+
+  Each Samsung UART should have an alias correctly numbered in the "aliases"
+  node, according to serialN format, where N is the port number (non-negative
+  decimal integer) as specified by User's Manual of respective SoC.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - samsung,s3c2410-uart
+          - samsung,s3c2412-uart
+          - samsung,s3c2440-uart
+          - samsung,s3c6400-uart
+          - samsung,s5pv210-uart
+          - samsung,exynos4210-uart
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 5
+
+  clock-names:
+    description: N = 0 is allowed for SoCs without internal baud clock mux.
+    minItems: 2
+    maxItems: 5
+    items:
+      - const: uart
+      - pattern: '^clk_uart_baud[0-3]$'
+      - pattern: '^clk_uart_baud[0-3]$'
+      - pattern: '^clk_uart_baud[0-3]$'
+      - pattern: '^clk_uart_baud[0-3]$'
+
+  interrupts:
+    description: RX interrupt and optionally TX interrupt.
+    minItems: 1
+    maxItems: 2
+
+  samsung,uart-fifosize:
+    description: The fifo size supported by the UART channel.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [16, 64, 256]
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s3c2410-uart
+              - samsung,s5pv210-uart
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 3
+        clock-names:
+          minItems: 2
+          maxItems: 3
+          items:
+            - const: uart
+            - pattern: '^clk_uart_baud[0-1]$'
+            - pattern: '^clk_uart_baud[0-1]$'
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos4210-uart
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          minItems: 2
+          maxItems: 2
+          items:
+            - const: uart
+            - const: clk_uart_baud0
+
+examples:
+  - |
+    #include <dt-bindings/clock/samsung,s3c64xx-clock.h>
+
+    uart0: serial@7f005000 {
+        compatible = "samsung,s3c6400-uart";
+        reg = <0x7f005000 0x100>;
+        interrupt-parent = <&vic1>;
+        interrupts = <5>;
+        clock-names = "uart", "clk_uart_baud2",
+                      "clk_uart_baud3";
+        clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+                 <&clocks SCLK_UART>;
+        samsung,uart-fifosize = <16>;
+    };