Merge tag 'hwmon-for-linus-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - asus_atk0110 driver modified to use new API

 - k10temp supports new CPUs and reports both Tctl and Tdie

 - minor fixes in gpio-fan, ltc2990, fschmd, and mc13783 drivers

* tag 'hwmon-for-linus-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (asus_atk0110) Make use of device managed memory
  hwmon: (asus_atk0110) Replace deprecated device register call
  hwmon: (k10temp) Make function get_raw_temp static
  hwmon: (gpio-fan) Fix "#cooling-cells" property name in bindings
  MAINTAINERS: hwmon: Add Documentation/devicetree/bindings/hwmon
  hwmon: (ltc2990) support all measurement modes
  hwmon: (ltc2990) add devicetree binding
  hwmon: (ltc2990) Fix incorrect conversion of negative temperatures
  hwmon: (core) check parent dev != NULL when chip != NULL
  hwmon: (fschmd) fix typo 'can by' to 'can be'
  hwmon: (k10temp) Display both Tctl and Tdie
  hwmon: (k10temp) Add support for Stoney Ridge and Bristol Ridge CPUs
  hwmon: MC13783: Add uid and die temperature sensor inputs

2 files changed, 37 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt
index 439a7430fc68..2becdcfdc840 100644
--- a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt
+++ b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt
@@ -11,7 +11,7 @@ Optional properties:
   must have the RPM values in ascending order.
 - alarm-gpios: This pin going active indicates something is wrong with
   the fan, and a udev event will be fired.
-- cooling-cells: If used as a cooling device, must be <2>
+- #cooling-cells: If used as a cooling device, must be <2>
   Also see: Documentation/devicetree/bindings/thermal/thermal.txt
   min and max states are derived from the speed-map of the fan.
 
diff --git a/Documentation/devicetree/bindings/hwmon/ltc2990.txt b/Documentation/devicetree/bindings/hwmon/ltc2990.txt
new file mode 100644
index 000000000000..f92f54029e84
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ltc2990.txt
@@ -0,0 +1,36 @@
+ltc2990: Linear Technology LTC2990 power monitor
+
+Required properties:
+- compatible: Must be "lltc,ltc2990"
+- reg: I2C slave address
+- lltc,meas-mode:
+	An array of two integers for configuring the chip measurement mode.
+
+	The first integer defines the bits 2..0 in the control register. In all
+	cases the internal temperature and supply voltage are measured. In
+	addition the following input measurements are enabled per mode:
+
+		0: V1, V2, TR2
+		1: V1-V2, TR2
+		2: V1-V2, V3, V4
+		3: TR1, V3, V4
+		4: TR1, V3-V4
+		5: TR1, TR2
+		6: V1-V2, V3-V4
+		7: V1, V2, V3, V4
+
+	The second integer defines the bits 4..3 in the control register. This
+	allows a subset of the measurements to be enabled:
+
+		0: Internal temperature and supply voltage only
+		1: TR1, V1 or V1-V2 only per mode
+		2: TR2, V3 or V3-V4 only per mode
+		3: All measurements per mode
+
+Example:
+
+ltc2990@4c {
+	compatible = "lltc,ltc2990";
+	reg = <0x4c>;
+	lltc,meas-mode = <7 3>;	/* V1, V2, V3, V4 */
+};