diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2023-04-26 02:27:13 +0300 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2023-04-26 02:27:13 +0300 |
| commit | 4ea956963f4fca59050a22fcc65f00a85d586e63 (patch) | |
| tree | 6fc32daed4499e7b98b9ce465a884f56882905de /Documentation/devicetree | |
| parent | c8cc58e289ed3b5bc50258f52776cf3dfa3bad66 (diff) | |
| parent | 73b41dc51fbeffa4a216b20193274cfe92b5d95b (diff) | |
| download | linux-4ea956963f4fca59050a22fcc65f00a85d586e63.tar.xz | |
Merge tag 'media/v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Removal of some old unused sensor drivers: ad9389b, m5mols, mt9m032,
mt9t001, noon010pc30, s5k6aa, sr030pc30 and vs6624
- New i.MX8 image sensor interface driver
- Some new RC keymaps
- lots of cleanups at atomisp driver to make it support standard
features present on other webcam drivers
- the cx18 and saa7146 now uses VB2
- lots of cleanups and driver improvements
* tag 'media/v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (460 commits)
media: ov5670: Fix probe on ACPI
media: nxp: imx8-isi: Remove 300ms sleep after enabling channel
media: nxp: imx8-isi: Replace udelay() with fsleep()
media: nxp: imx8-isi: Drop partial support for i.MX8QM and i.MX8QXP
media: nxp: Add i.MX8 ISI driver
media: dt-bindings: media: Add i.MX8 ISI DT bindings
media: atomisp: gmin_platform: Add Lenovo Ideapad Miix 310 gmin_vars
media: atomisp: gmin_platform: Make DMI quirks take precedence over the _DSM table
media: atomisp: Remove struct atomisp_sub_device index field
media: atomisp: Drop support for streaming from 2 sensors at once
media: atomisp: Remove atomisp_try_fmt() call from atomisp_set_fmt()
media: atomisp: Remove unused ATOM_ISP_MAX_WIDTH_TMP and ATOM_ISP_MAX_HEIGHT_TMP
media: atomisp: Remove snr_mbus_fmt local var from atomisp_try_fmt()
media: atomisp: Remove custom V4L2_CID_FMT_AUTO control
media: atomisp: Remove continuous mode related code from atomisp_set_fmt()
media: atomisp: Remove duplicate atomisp_[start|stop]_streaming() prototypes
media: atomisp: gc0310: Switch over to ACPI powermanagement
media: atomisp: gc0310: Use devm_kzalloc() for data struct
media: atomisp: gc0310: Add runtime-pm support
media: atomisp: gc0310: Delay power-on till streaming is started
...
Diffstat (limited to 'Documentation/devicetree')
64 files changed, 2234 insertions, 1384 deletions
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml index 53945c61325c..42dfe22ad5f1 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml @@ -11,7 +11,7 @@ maintainers: - Maxime Ripard <mripard@kernel.org> allOf: - - $ref: "rc.yaml#" + - $ref: rc.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml index 9d44236f2deb..a4f06bbdfe49 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml @@ -2,8 +2,8 @@ %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/allwinner,sun50i-h6-vpu-g2.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/allwinner,sun50i-h6-vpu-g2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Hantro G2 VPU codec implemented on Allwinner H6 SoC diff --git a/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml b/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml index e551be5e680e..f23fa6d06ad0 100644 --- a/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml +++ b/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml @@ -2,8 +2,8 @@ # Copyright 2020 BayLibre, SAS %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/amlogic,axg-ge2d.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/amlogic,axg-ge2d.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Amlogic GE2D Acceleration Unit diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml index b827edabcafa..55930f6107c9 100644 --- a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml +++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml @@ -2,8 +2,8 @@ # Copyright 2019 BayLibre, SAS %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/amlogic,gx-vdec.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/amlogic,gx-vdec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Amlogic Video Decoder diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-ir-tx.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-ir-tx.yaml index 4432fea32650..377acce93423 100644 --- a/Documentation/devicetree/bindings/media/amlogic,meson-ir-tx.yaml +++ b/Documentation/devicetree/bindings/media/amlogic,meson-ir-tx.yaml @@ -2,8 +2,8 @@ %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/amlogic,meson-ir-tx.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/amlogic,meson-ir-tx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Amlogic Meson IR transmitter diff --git a/Documentation/devicetree/bindings/media/amlogic,meson6-ir.yaml b/Documentation/devicetree/bindings/media/amlogic,meson6-ir.yaml new file mode 100644 index 000000000000..3f9fa92703bb --- /dev/null +++ b/Documentation/devicetree/bindings/media/amlogic,meson6-ir.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/amlogic,meson6-ir.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson IR remote control receiver + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +allOf: + - $ref: rc.yaml# + +properties: + compatible: + oneOf: + - enum: + - amlogic,meson6-ir + - amlogic,meson8b-ir + - amlogic,meson-gxbb-ir + - items: + - const: amlogic,meson-gx-ir + - const: amlogic,meson-gxbb-ir + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + ir-receiver@c8100480 { + compatible = "amlogic,meson6-ir"; + reg = <0xc8100480 0x20>; + interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>; + }; diff --git a/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt b/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt deleted file mode 100644 index 0bf6fb7fbeab..000000000000 --- a/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt +++ /dev/null @@ -1,16 +0,0 @@ -Exynos4x12/Exynos5 SoC series camera host interface (FIMC-LITE) - -Required properties: - -- compatible : should be one of: - "samsung,exynos4212-fimc-lite" for Exynos4212/4412 SoCs, - "samsung,exynos5250-fimc-lite" for Exynos5250 compatible - devices; -- reg : physical base address and size of the device memory mapped - registers; -- interrupts : should contain FIMC-LITE interrupt; -- clocks : FIMC LITE gate clock should be specified in this property. -- clock-names : should contain "flite" entry. - -Each FIMC device should have an alias in the aliases node, in the form of -fimc-lite<n>, where <n> is an integer specifying the IP block instance. diff --git a/Documentation/devicetree/bindings/media/exynos4-fimc-is.txt b/Documentation/devicetree/bindings/media/exynos4-fimc-is.txt deleted file mode 100644 index 32ced99d4244..000000000000 --- a/Documentation/devicetree/bindings/media/exynos4-fimc-is.txt +++ /dev/null @@ -1,50 +0,0 @@ -Exynos4x12 SoC series Imaging Subsystem (FIMC-IS) - -The FIMC-IS is a subsystem for processing image signal from an image sensor. -The Exynos4x12 SoC series FIMC-IS V1.5 comprises of a dedicated ARM Cortex-A5 -processor, ISP, DRC and FD IP blocks and peripheral devices such as UART, I2C -and SPI bus controllers, PWM and ADC. - -fimc-is node ------------- - -Required properties: -- compatible : should be "samsung,exynos4212-fimc-is" for Exynos4212 and - Exynos4412 SoCs; -- reg : physical base address and length of the registers set; -- interrupts : must contain two FIMC-IS interrupts, in order: ISP0, ISP1; -- clocks : list of clock specifiers, corresponding to entries in - clock-names property; -- clock-names : must contain "ppmuispx", "ppmuispx", "lite0", "lite1" - "mpll", "sysreg", "isp", "drc", "fd", "mcuisp", "gicisp", - "pwm_isp", "mcuctl_isp", "uart", "ispdiv0", "ispdiv1", - "mcuispdiv0", "mcuispdiv1", "aclk200", "div_aclk200", - "aclk400mcuisp", "div_aclk400mcuisp" entries, - matching entries in the clocks property. -pmu subnode ------------ - -Required properties: - - reg : must contain PMU physical base address and size of the register set. - -The following are the FIMC-IS peripheral device nodes and can be specified -either standalone or as the fimc-is node child nodes. - -i2c-isp (ISP I2C bus controller) nodes ------------------------------------------- - -Required properties: - -- compatible : should be "samsung,exynos4212-i2c-isp" for Exynos4212 and - Exynos4412 SoCs; -- reg : physical base address and length of the registers set; -- clocks : must contain gate clock specifier for this controller; -- clock-names : must contain "i2c_isp" entry. - -For the above nodes it is required to specify a pinctrl state named "default", -according to the pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt. - -Device tree nodes of the image sensors' controlled directly by the FIMC-IS -firmware must be child nodes of their corresponding ISP I2C bus controller node. -The data link of these image sensors must be specified using the common video -interfaces bindings, defined in video-interfaces.txt. diff --git a/Documentation/devicetree/bindings/media/gpio-ir-receiver.yaml b/Documentation/devicetree/bindings/media/gpio-ir-receiver.yaml index 61072745b983..008c007ed702 100644 --- a/Documentation/devicetree/bindings/media/gpio-ir-receiver.yaml +++ b/Documentation/devicetree/bindings/media/gpio-ir-receiver.yaml @@ -23,6 +23,9 @@ properties: description: autosuspend delay time in milliseconds $ref: /schemas/types.yaml#/definitions/uint32 + wakeup-source: + description: IR receiver can wake-up the system. + required: - compatible - gpios diff --git a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml index af8ada55b3f2..4e69b6a7ffcc 100644 --- a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml +++ b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/i2c/chrontel,ch7322.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/i2c/chrontel,ch7322.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Chrontel HDMI-CEC Controller diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml index 82d3d18c16a1..a0855d3b7577 100644 --- a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml +++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml @@ -38,7 +38,7 @@ properties: dongwoon,aac-mode: description: Indication of AAC mode select. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 enum: - 1 # AAC2 mode(operation time# 0.48 x Tvib) - 2 # AAC3 mode(operation time# 0.70 x Tvib) @@ -50,7 +50,7 @@ properties: description: Number of AAC Timing count that controlled by one 6-bit period of vibration register AACT[5:0], the unit of which is 100 us. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 default: 0x20 minimum: 0x00 maximum: 0x3f @@ -59,7 +59,7 @@ properties: description: Indication of VCM internal clock dividing rate select, as one multiple factor to calculate VCM ring periodic time Tvib. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 enum: - 0 # Dividing Rate - 2 - 1 # Dividing Rate - 1 diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml index 0c4213adbf6a..8df859136047 100644 --- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml @@ -86,7 +86,7 @@ properties: is 100000 micro volts maxim,gpio-poc: - $ref: '/schemas/types.yaml#/definitions/uint32-array' + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 2 maxItems: 2 description: | diff --git a/Documentation/devicetree/bindings/media/i2c/ov2685.txt b/Documentation/devicetree/bindings/media/i2c/ov2685.txt deleted file mode 100644 index 625c4a8c0d53..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/ov2685.txt +++ /dev/null @@ -1,41 +0,0 @@ -* Omnivision OV2685 MIPI CSI-2 sensor - -Required Properties: -- compatible: shall be "ovti,ov2685" -- clocks: reference to the xvclk input clock -- clock-names: shall be "xvclk" -- avdd-supply: Analog voltage supply, 2.8 volts -- dovdd-supply: Digital I/O voltage supply, 1.8 volts -- dvdd-supply: Digital core voltage supply, 1.8 volts -- reset-gpios: Low active reset gpio - -The device node shall contain one 'port' child node with an -'endpoint' subnode for its digital output video port, -in accordance with the video interface bindings defined in -Documentation/devicetree/bindings/media/video-interfaces.txt. -The endpoint optional property 'data-lanes' shall be "<1>". - -Example: -&i2c7 { - ov2685: camera-sensor@3c { - compatible = "ovti,ov2685"; - reg = <0x3c>; - pinctrl-names = "default"; - pinctrl-0 = <&clk_24m_cam>; - - clocks = <&cru SCLK_TESTCLKOUT1>; - clock-names = "xvclk"; - - avdd-supply = <&pp2800_cam>; - dovdd-supply = <&pp1800>; - dvdd-supply = <&pp1800>; - reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; - - port { - ucam_out: endpoint { - remote-endpoint = <&mipi_in_ucam>; - data-lanes = <1>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml index e17288d57981..57f5e48fd8e0 100644 --- a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Omnivision OV8856 CMOS Sensor maintainers: - - Dongchun Zhu <dongchun.zhu@mediatek.com> + - Sakari Ailus <sakari.ailus@linux.intel.com> description: |- The Omnivision OV8856 is a high performance, 1/4-inch, 8 megapixel, CMOS diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml index 54df9d73dc86..763cebe03dc2 100644 --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml @@ -88,7 +88,7 @@ properties: properties: link-frequencies: true ovti,mipi-clock-voltage: - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 description: Definition of MIPI clock voltage unit. This entry corresponds to the link speed defined by the 'link-frequencies' property. diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml new file mode 100644 index 000000000000..8b389314c352 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov2685.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OmniVision OV2685 Image Sensor + +maintainers: + - Shunqian Zheng <zhengsq@rock-chips.com> + +properties: + compatible: + const: ovti,ov2685 + + reg: + maxItems: 1 + + clocks: + items: + - description: XVCLK clock + + clock-names: + items: + - const: xvclk + + dvdd-supply: + description: Digital Domain Power Supply + + avdd-supply: + description: Analog Domain Power Supply + + dovdd-supply: + description: I/O Domain Power Supply + + reset-gpios: + maxItems: 1 + description: Reset Pin GPIO Control (active low) + + port: + description: MIPI CSI-2 transmitter port + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + maxItems: 2 + + required: + - data-lanes + +required: + - compatible + - reg + - clocks + - clock-names + - dvdd-supply + - avdd-supply + - dovdd-supply + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3399-cru.h> + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ov2685: camera-sensor@3c { + compatible = "ovti,ov2685"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&clk_24m_cam>; + + clocks = <&cru SCLK_TESTCLKOUT1>; + clock-names = "xvclk"; + + avdd-supply = <&pp2800_cam>; + dovdd-supply = <&pp1800>; + dvdd-supply = <&pp1800>; + reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + + port { + ucam_out: endpoint { + remote-endpoint = <&mipi_in_ucam>; + data-lanes = <1>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml b/Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml new file mode 100644 index 000000000000..c8f2955e0825 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/samsung,s5k5baf.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor with embedded SoC ISP + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +properties: + compatible: + const: samsung,s5k5baf + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: mclk + + clock-frequency: + default: 24000000 + description: mclk clock frequency + + rstn-gpios: + maxItems: 1 + description: RSTN pin + + stbyn-gpios: + maxItems: 1 + description: STDBYN pin + + vdda-supply: + description: Analog power supply 2.8V (2.6V to 3.0V) + + vddio-supply: + description: I/O power supply 1.8V (1.65V to 1.95V) or 2.8V (2.5V to 3.1V) + + vddreg-supply: + description: + Regulator input power supply 1.8V (1.7V to 1.9V) or 2.8V (2.6V to 3.0) + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + items: + - const: 1 + +required: + - compatible + - clocks + - clock-names + - rstn-gpios + - stbyn-gpios + - vdda-supply + - vddio-supply + - vddreg-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@2d { + compatible = "samsung,s5k5baf"; + reg = <0x2d>; + clocks = <&camera 0>; + clock-names = "mclk"; + clock-frequency = <24000000>; + rstn-gpios = <&gpl2 1 GPIO_ACTIVE_LOW>; + stbyn-gpios = <&gpl2 0 GPIO_ACTIVE_LOW>; + vdda-supply = <&cam_io_en_reg>; + vddio-supply = <&vtcam_reg>; + vddreg-supply = <&vt_core_15v_reg>; + + port { + endpoint { + remote-endpoint = <&csis1_ep>; + data-lanes = <1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml b/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml new file mode 100644 index 000000000000..7e83a94124b5 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/samsung,s5k6a3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5K6A3(YX) raw image sensor + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + S5K6A3(YX) is a raw image sensor with MIPI CSI-2 and CCP2 image data + interfaces and CCI (I2C compatible) control bus. + +properties: + compatible: + const: samsung,s5k6a3 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: extclk + + clock-frequency: + default: 24000000 + description: extclk clock frequency + + gpios: + maxItems: 1 + description: GPIO connected to the RESET pin + + afvdd-supply: + description: AF (actuator) voltage supply + + svdda-supply: + description: Core voltage supply + + svddio-supply: + description: I/O voltage supply + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + items: + - const: 1 + +required: + - compatible + - clocks + - clock-names + - gpios + - afvdd-supply + - svdda-supply + - svddio-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@10 { + compatible = "samsung,s5k6a3"; + reg = <0x10>; + clock-frequency = <24000000>; + clocks = <&camera 1>; + clock-names = "extclk"; + gpios = <&gpm1 6 GPIO_ACTIVE_LOW>; + afvdd-supply = <&ldo19_reg>; + svdda-supply = <&cam_io_reg>; + svddio-supply = <&ldo19_reg>; + + port { + endpoint { + remote-endpoint = <&csis1_ep>; + data-lanes = <1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml index 21377daae026..a531badc16c9 100644 --- a/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml @@ -12,15 +12,26 @@ maintainers: description: |- The Sony IMX290 is a 1/2.8-Inch CMOS Solid-state image sensor with Square - Pixel for Color Cameras. It is programmable through I2C and 4-wire - interfaces. The sensor output is available via CMOS logic parallel SDR - output, Low voltage LVDS DDR output and CSI-2 serial data output. The CSI-2 - bus is the default. No bindings have been defined for the other busses. + Pixel, available in either mono or colour variants. It is programmable + through I2C and 4-wire interfaces. + + The sensor output is available via CMOS logic parallel SDR output, Low voltage + LVDS DDR output and CSI-2 serial data output. The CSI-2 bus is the default. + No bindings have been defined for the other busses. + + imx290lqr is the full model identifier for the colour variant. "sony,imx290" + is treated the same as this as it was the original compatible string. + imx290llr is the mono version of the sensor. properties: compatible: - enum: - - sony,imx290 + oneOf: + - enum: + - sony,imx290lqr # Colour + - sony,imx290llr # Monochrome + - sony,imx327lqr # Colour + - const: sony,imx290 + deprecated: true reg: maxItems: 1 @@ -101,7 +112,7 @@ examples: #size-cells = <0>; imx290: camera-sensor@1a { - compatible = "sony,imx290"; + compatible = "sony,imx290lqr"; reg = <0x1a>; pinctrl-names = "default"; diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml index f5055b9db693..09533496b20c 100644 --- a/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml @@ -82,7 +82,7 @@ examples: imx334: endpoint { remote-endpoint = <&cam>; data-lanes = <1 2 3 4>; - link-frequencies = /bits/ 64 <891000000>; + link-frequencies = /bits/ 64 <891000000 445500000>; }; }; }; diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml index 9cfc0c7d23e0..7032c7e15039 100644 --- a/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml @@ -27,7 +27,7 @@ properties: maxItems: 1 mediatek,gce-client-reg: - $ref: '/schemas/types.yaml#/definitions/phandle-array' + $ref: /schemas/types.yaml#/definitions/phandle-array items: items: - description: phandle of GCE diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml index c4f20acdc1f8..dca9b0c5e106 100644 --- a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml +++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml @@ -2,8 +2,8 @@ %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/mediatek,vcodec-subdev-decoder.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/mediatek,vcodec-subdev-decoder.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Mediatek Video Decode Accelerator With Multi Hardware @@ -61,7 +61,10 @@ properties: - mediatek,mt8195-vcodec-dec reg: - maxItems: 1 + minItems: 1 + items: + - description: VDEC_SYS register space + - description: VDEC_RACING_CTRL register space iommus: minItems: 1 @@ -76,11 +79,6 @@ properties: The node of system control processor (SCP), using the remoteproc & rpmsg framework. - dma-ranges: - maxItems: 1 - description: | - Describes the physical address space of IOMMU maps to memory. - "#address-cells": const: 2 @@ -91,17 +89,19 @@ properties: # Required child node: patternProperties: - '^vcodec-lat@[0-9a-f]+$': + '^video-codec@[0-9a-f]+$': type: object properties: compatible: enum: + - mediatek,mtk-vcodec-core - mediatek,mtk-vcodec-lat - mediatek,mtk-vcodec-lat-soc reg: maxItems: 1 + description: VDEC_MISC register space interrupts: maxItems: 1 @@ -114,68 +114,13 @@ patternProperties: Refer to bindings/iommu/mediatek,iommu.yaml. clocks: + minItems: 4 maxItems: 5 clock-names: - items: - - const: sel - - const: soc-vdec - - const: soc-lat - - const: vdec - - const: top - - assigned-clocks: - maxItems: 1 - - assigned-clock-parents: - maxItems: 1 - - power-domains: - maxItems: 1 - - required: - - compatible - - reg - - iommus - - clocks - - clock-names - - assigned-clocks - - assigned-clock-parents - - power-domains - - additionalProperties: false - - '^vcodec-core@[0-9a-f]+$': - type: object - - properties: - compatible: - const: mediatek,mtk-vcodec-core - - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - - iommus: - minItems: 1 - maxItems: 32 - description: | - List of the hardware port in respective IOMMU block for current Socs. - Refer to bindings/iommu/mediatek,iommu.yaml. - - clocks: + minItems: 4 maxItems: 5 - clock-names: - items: - - const: sel - - const: soc-vdec - - const: soc-lat - - const: vdec - - const: top - assigned-clocks: maxItems: 1 @@ -188,7 +133,6 @@ patternProperties: required: - compatible - reg - - interrupts - iommus - clocks - clock-names @@ -203,7 +147,6 @@ required: - reg - iommus - mediatek,scp - - dma-ranges - ranges if: @@ -211,12 +154,45 @@ if: compatible: contains: enum: + - mediatek,mtk-vcodec-core - mediatek,mtk-vcodec-lat then: required: - interrupts +allOf: + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt8192-vcodec-dec + then: + properties: + clock-names: + items: + - const: sel + - const: soc-vdec + - const: soc-lat + - const: vdec + - const: top + + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt8195-vcodec-dec + then: + properties: + clock-names: + items: + - const: sel + - const: vdec + - const: lat + - const: top + additionalProperties: false examples: @@ -236,12 +212,11 @@ examples: compatible = "mediatek,mt8192-vcodec-dec"; mediatek,scp = <&scp>; iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>; - dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>; #address-cells = <2>; #size-cells = <2>; ranges = <0 0 0 0x16000000 0 0x40000>; reg = <0 0x16000000 0 0x1000>; /* VDEC_SYS */ - vcodec-lat@10000 { + video-codec@10000 { compatible = "mediatek,mtk-vcodec-lat"; reg = <0 0x10000 0 0x800>; interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH 0>; @@ -264,7 +239,7 @@ examples: power-domains = <&spm MT8192_POWER_DOMAIN_VDEC>; }; - vcodec-core@25000 { + video-codec@25000 { compatible = "mediatek,mtk-vcodec-core"; reg = <0 0x25000 0 0x1000>; interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH 0>; diff --git a/Documentation/devicetree/bindings/media/meson-ir.txt b/Documentation/devicetree/bindings/media/meson-ir.txt deleted file mode 100644 index efd9d29a8f10..000000000000 --- a/Documentation/devicetree/bindings/media/meson-ir.txt +++ /dev/null @@ -1,20 +0,0 @@ -* Amlogic Meson IR remote control receiver - -Required properties: - - compatible : depending on the platform this should be one of: - - "amlogic,meson6-ir" - - "amlogic,meson8b-ir" - - "amlogic,meson-gxbb-ir" - - reg : physical base address and length of the device registers - - interrupts : a single specifier for the interrupt from the device - -Optional properties: - - linux,rc-map-name: see rc.txt file in the same directory. - -Example: - - ir-receiver@c8100480 { - compatible= "amlogic,meson6-ir"; - reg = <0xc8100480 0x20>; - interrupts = <0 15 1>; - }; diff --git a/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml b/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml index 4b77103ca913..59b805ca47c5 100644 --- a/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml +++ b/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml @@ -2,8 +2,8 @@ %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/microchip,sama5d4-vdec.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/microchip,sama5d4-vdec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Hantro G1 VPU codec implemented on Microchip SAMA5D4 SoCs diff --git a/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml b/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml new file mode 100644 index 000000000000..6038b9b5ab36 --- /dev/null +++ b/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml @@ -0,0 +1,173 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/nxp,imx8-isi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX8 Image Sensing Interface + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +description: | + The Image Sensing Interface (ISI) combines image processing pipelines with + DMA engines to process and capture frames originating from a variety of + sources. The inputs to the ISI go through Pixel Link interfaces, and their + number and nature is SoC-dependent. They cover both capture interfaces (MIPI + CSI-2 RX, HDMI RX, ...) and display engine outputs for writeback support. + +properties: + compatible: + enum: + - fsl,imx8mn-isi + - fsl,imx8mp-isi + + reg: + maxItems: 1 + + clocks: + items: + - description: The AXI clock + - description: The APB clock + # TODO: Check if the per-channel ipg_proc_clk clocks need to be specified + # as well, in case some SoCs have the ability to control them separately. + # This may be the case of the i.MX8[DQ]X(P) + + clock-names: + items: + - const: axi + - const: apb + + fsl,blk-ctrl: + $ref: /schemas/types.yaml#/definitions/phandle + description: + A phandle referencing the block control that contains the CSIS to ISI + gasket. + + interrupts: + description: Processing pipeline interrupts, one per pipeline + minItems: 1 + maxItems: 2 + + power-domains: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + Ports represent the Pixel Link inputs to the ISI. Their number and + assignment are model-dependent. Each port shall have a single endpoint. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - fsl,blk-ctrl + - ports + +allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx8mn-isi + then: + properties: + interrupts: + maxItems: 1 + ports: + properties: + port@0: + description: MIPI CSI-2 RX + required: + - port@0 + + - if: + properties: + compatible: + contains: + const: fsl,imx8mp-isi + then: + properties: + interrupts: + maxItems: 2 + ports: + properties: + port@0: + description: MIPI CSI-2 RX 0 + port@1: + description: MIPI CSI-2 RX 1 + required: + - port@0 + - port@1 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mn-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/imx8mn-power.h> + + isi@32e20000 { + compatible = "fsl,imx8mn-isi"; + reg = <0x32e20000 0x100>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_DISP_AXI_ROOT>, + <&clk IMX8MN_CLK_DISP_APB_ROOT>; + clock-names = "axi", "apb"; + fsl,blk-ctrl = <&disp_blk_ctrl>; + power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_ISI>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + isi_in: endpoint { + remote-endpoint = <&mipi_csi_out>; + }; + }; + }; + }; + + - | + #include <dt-bindings/clock/imx8mp-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + isi@32e00000 { + compatible = "fsl,imx8mp-isi"; + reg = <0x32e00000 0x4000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; + clock-names = "axi", "apb"; + fsl,blk-ctrl = <&media_blk_ctrl>; + power-domains = <&mediamix_pd>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + isi_in_0: endpoint { + remote-endpoint = <&mipi_csi_0_out>; + }; + }; + + port@1 { + reg = <1>; + isi_in_1: endpoint { + remote-endpoint = <&mipi_csi_1_out>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml index 7dc13a4b1805..3d58f02b0c5d 100644 --- a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml +++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml @@ -2,8 +2,8 @@ %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/nxp,imx8mq-vpu.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/nxp,imx8mq-vpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Hantro G1/G2 VPU codecs implemented on i.MX8M SoCs diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml index 12ec3e1ea869..eb1499912c58 100644 --- a/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml +++ b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml @@ -2,8 +2,8 @@ %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/qcom,msm8916-camss.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/qcom,msm8916-camss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm CAMSS ISP diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml index 2abb7d21c0d1..2350bf4b370e 100644 --- a/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml @@ -1,11 +1,10 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/qcom,msm8916-venus.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/qcom,msm8916-venus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Venus video encode and decode accelerators +title: Qualcomm MSM8916 Venus video encode and decode accelerators maintainers: - Stanimir Varbanov <stanimir.varbanov@linaro.org> @@ -14,16 +13,13 @@ description: | The Venus IP is a video encode and decode accelerator present on Qualcomm platforms +allOf: + - $ref: qcom,venus-common.yaml# + properties: compatible: const: qcom,msm8916-venus - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - power-domains: maxItems: 1 @@ -39,9 +35,6 @@ properties: iommus: maxItems: 1 - memory-region: - maxItems: 1 - video-decoder: type: object @@ -66,57 +59,36 @@ properties: additionalProperties: false - video-firmware: - type: object - additionalProperties: false - - description: | - Firmware subnode is needed when the platform does not - have TrustZone. - - properties: - iommus: - maxItems: 1 - - required: - - iommus - required: - compatible - - reg - - interrupts - - power-domains - - clocks - - clock-names - iommus - - memory-region - video-decoder - video-encoder -additionalProperties: false +unevaluatedProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/clock/qcom,gcc-msm8916.h> - - video-codec@1d00000 { - compatible = "qcom,msm8916-venus"; - reg = <0x01d00000 0xff000>; - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>, - <&gcc GCC_VENUS0_AHB_CLK>, - <&gcc GCC_VENUS0_AXI_CLK>; - clock-names = "core", "iface", "bus"; - power-domains = <&gcc VENUS_GDSC>; - iommus = <&apps_iommu 5>; - memory-region = <&venus_mem>; - - video-decoder { - compatible = "venus-decoder"; - }; - - video-encoder { - compatible = "venus-encoder"; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,gcc-msm8916.h> + + video-codec@1d00000 { + compatible = "qcom,msm8916-venus"; + reg = <0x01d00000 0xff000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>, + <&gcc GCC_VENUS0_AHB_CLK>, + <&gcc GCC_VENUS0_AXI_CLK>; + clock-names = "core", "iface", "bus"; + power-domains = <&gcc VENUS_GDSC>; + iommus = <&apps_iommu 5>; + memory-region = <&venus_mem>; + + video-decoder { + compatible = "venus-decoder"; + }; + + video-encoder { + compatible = "venus-encoder"; }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml index 6aeb3d6d02d5..8a10aa1cafc5 100644 --- a/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml +++ b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml @@ -2,8 +2,8 @@ %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/qcom,msm8996-camss.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/qcom,msm8996-camss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm CAMSS ISP diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml index 29d0cb6c6ebe..3a4d817e544e 100644 --- a/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml @@ -1,11 +1,10 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/qcom,msm8996-venus.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/qcom,msm8996-venus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Venus video encode and decode accelerators +title: Qualcomm MSM8996 Venus video encode and decode accelerators maintainers: - Stanimir Varbanov <stanimir.varbanov@linaro.org> @@ -14,16 +13,13 @@ description: | The Venus IP is a video encode and decode accelerator present on Qualcomm platforms +allOf: + - $ref: qcom,venus-common.yaml# + properties: compatible: const: qcom,msm8996-venus - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - power-domains: maxItems: 1 @@ -37,12 +33,17 @@ properties: - const: bus - const: mbus + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: video-mem + - const: cpu-cfg + iommus: maxItems: 20 - memory-region: - maxItems: 1 - video-decoder: type: object @@ -93,83 +94,62 @@ properties: additionalProperties: false - video-firmware: - type: object - additionalProperties: false - - description: | - Firmware subnode is needed when the platform does not - have TrustZone. - - properties: - iommus: - maxItems: 1 - - required: - - iommus - required: - compatible - - reg - - interrupts - - power-domains - - clocks - - clock-names - iommus - - memory-region - video-decoder - video-encoder -additionalProperties: false +unevaluatedProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/clock/qcom,mmcc-msm8996.h> - - video-codec@c00000 { - compatible = "qcom,msm8996-venus"; - reg = <0x00c00000 0xff000>; - interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mmcc VIDEO_CORE_CLK>, - <&mmcc VIDEO_AHB_CLK>, - <&mmcc VIDEO_AXI_CLK>, - <&mmcc VIDEO_MAXI_CLK>; - clock-names = "core", "iface", "bus", "mbus"; - power-domains = <&mmcc VENUS_GDSC>; - iommus = <&venus_smmu 0x00>, - <&venus_smmu 0x01>, - <&venus_smmu 0x0a>, - <&venus_smmu 0x07>, - <&venus_smmu 0x0e>, - <&venus_smmu 0x0f>, - <&venus_smmu 0x08>, - <&venus_smmu 0x09>, - <&venus_smmu 0x0b>, - <&venus_smmu 0x0c>, - <&venus_smmu 0x0d>, - <&venus_smmu 0x10>, - <&venus_smmu 0x11>, - <&venus_smmu 0x21>, - <&venus_smmu 0x28>, - <&venus_smmu 0x29>, - <&venus_smmu 0x2b>, - <&venus_smmu 0x2c>, - <&venus_smmu 0x2d>, - <&venus_smmu 0x31>; - memory-region = <&venus_mem>; - - video-decoder { - compatible = "venus-decoder"; - clocks = <&mmcc VIDEO_SUBCORE0_CLK>; - clock-names = "core"; - power-domains = <&mmcc VENUS_CORE0_GDSC>; - }; - - video-encoder { - compatible = "venus-encoder"; - clocks = <&mmcc VIDEO_SUBCORE1_CLK>; - clock-names = "core"; - power-domains = <&mmcc VENUS_CORE1_GDSC>; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,mmcc-msm8996.h> + + video-codec@c00000 { + compatible = "qcom,msm8996-venus"; + reg = <0x00c00000 0xff000>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mmcc VIDEO_CORE_CLK>, + <&mmcc VIDEO_AHB_CLK>, + <&mmcc VIDEO_AXI_CLK>, + <&mmcc VIDEO_MAXI_CLK>; + clock-names = "core", "iface", "bus", "mbus"; + power-domains = <&mmcc VENUS_GDSC>; + iommus = <&venus_smmu 0x00>, + <&venus_smmu 0x01>, + <&venus_smmu 0x0a>, + <&venus_smmu 0x07>, + <&venus_smmu 0x0e>, + <&venus_smmu 0x0f>, + <&venus_smmu 0x08>, + <&venus_smmu 0x09>, + <&venus_smmu 0x0b>, + <&venus_smmu 0x0c>, + <&venus_smmu 0x0d>, + <&venus_smmu 0x10>, + <&venus_smmu 0x11>, + <&venus_smmu 0x21>, + <&venus_smmu 0x28>, + <&venus_smmu 0x29>, + <&venus_smmu 0x2b>, + <&venus_smmu 0x2c>, + <&venus_smmu 0x2d>, + <&venus_smmu 0x31>; + memory-region = <&venus_mem>; + + video-decoder { + compatible = "venus-decoder"; + clocks = <&mmcc VIDEO_SUBCORE0_CLK>; + clock-names = "core"; + power-domains = <&mmcc VENUS_CORE0_GDSC>; + }; + + video-encoder { + compatible = "venus-encoder"; + clocks = <&mmcc VIDEO_SUBCORE1_CLK>; + clock-names = "core"; + power-domains = <&mmcc VENUS_CORE1_GDSC>; }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml index 42ee3f06c6be..5cec1d077cda 100644 --- a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml @@ -1,11 +1,10 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/qcom,sc7180-venus.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/qcom,sc7180-venus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Venus video encode and decode accelerators +title: Qualcomm SC7180 Venus video encode and decode accelerators maintainers: - Stanimir Varbanov <stanimir.varbanov@linaro.org> @@ -14,16 +13,13 @@ description: | The Venus IP is a video encode and decode accelerator present on Qualcomm platforms +allOf: + - $ref: qcom,venus-common.yaml# + properties: compatible: const: qcom,sc7180-venus - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - power-domains: minItems: 2 maxItems: 3 @@ -60,6 +56,10 @@ properties: - const: video-mem - const: cpu-cfg + operating-points-v2: true + opp-table: + type: object + video-decoder: type: object @@ -84,63 +84,42 @@ properties: additionalProperties: false - video-firmware: - type: object - additionalProperties: false - - description: | - Firmware subnode is needed when the platform does not - have TrustZone. - - properties: - iommus: - maxItems: 1 - - required: - - iommus - required: - compatible - - reg - - interrupts - - power-domains - power-domain-names - - clocks - - clock-names - iommus - - memory-region - video-decoder - video-encoder -additionalProperties: false +unevaluatedProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/clock/qcom,videocc-sc7180.h> - - venus: video-codec@aa00000 { - compatible = "qcom,sc7180-venus"; - reg = <0x0aa00000 0xff000>; - interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&videocc VENUS_GDSC>, - <&videocc VCODEC0_GDSC>; - power-domain-names = "venus", "vcodec0"; - clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, - <&videocc VIDEO_CC_VENUS_AHB_CLK>, - <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>, - <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, - <&videocc VIDEO_CC_VCODEC0_AXI_CLK>; - clock-names = "core", "iface", "bus", - "vcodec0_core", "vcodec0_bus"; - iommus = <&apps_smmu 0x0c00 0x60>; - memory-region = <&venus_mem>; - - video-decoder { - compatible = "venus-decoder"; - }; - - video-encoder { - compatible = "venus-encoder"; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,videocc-sc7180.h> + + venus: video-codec@aa00000 { + compatible = "qcom,sc7180-venus"; + reg = <0x0aa00000 0xff000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&videocc VENUS_GDSC>, + <&videocc VCODEC0_GDSC>; + power-domain-names = "venus", "vcodec0"; + clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, + <&videocc VIDEO_CC_VENUS_AHB_CLK>, + <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>, + <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC0_AXI_CLK>; + clock-names = "core", "iface", "bus", + "vcodec0_core", "vcodec0_bus"; + iommus = <&apps_smmu 0x0c00 0x60>; + memory-region = <&venus_mem>; + + video-decoder { + compatible = "venus-decoder"; + }; + + video-encoder { + compatible = "venus-encoder"; }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml index cf361dd9de08..8f9b6433aeb8 100644 --- a/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml @@ -1,11 +1,10 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/qcom,sc7280-venus.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/qcom,sc7280-venus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Venus video encode and decode accelerators +title: Qualcomm SC7280 Venus video encode and decode accelerators maintainers: - Stanimir Varbanov <stanimir.varbanov@linaro.org> @@ -14,16 +13,13 @@ description: | The Venus Iris2 IP is a video encode and decode accelerator present on Qualcomm platforms +allOf: + - $ref: qcom,venus-common.yaml# + properties: compatible: const: qcom,sc7280-venus - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - power-domains: minItems: 2 maxItems: 3 @@ -49,9 +45,6 @@ properties: iommus: maxItems: 2 - memory-region: - maxItems: 1 - interconnects: maxItems: 2 @@ -60,6 +53,10 @@ properties: - const: cpu-cfg - const: video-mem + operating-points-v2: true + opp-table: + type: object + video-decoder: type: object @@ -84,79 +81,58 @@ properties: additionalProperties: false - video-firmware: - type: object - additionalProperties: false - - description: | - Firmware subnode is needed when the platform does not - have TrustZone. - - properties: - iommus: - maxItems: 1 - - required: - - iommus - required: - compatible - - reg - - interrupts - - power-domains - power-domain-names - - clocks - - clock-names - iommus - - memory-region - video-decoder - video-encoder -additionalProperties: false +unevaluatedProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/clock/qcom,videocc-sc7280.h> - #include <dt-bindings/interconnect/qcom,sc7280.h> - #include <dt-bindings/power/qcom-rpmpd.h> - - venus: video-codec@aa00000 { - compatible = "qcom,sc7280-venus"; - reg = <0x0aa00000 0xd0600>; - interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; - - clocks = <&videocc VIDEO_CC_MVSC_CORE_CLK>, - <&videocc VIDEO_CC_MVSC_CTL_AXI_CLK>, - <&videocc VIDEO_CC_VENUS_AHB_CLK>, - <&videocc VIDEO_CC_MVS0_CORE_CLK>, - <&videocc VIDEO_CC_MVS0_AXI_CLK>; - clock-names = "core", "bus", "iface", - "vcodec_core", "vcodec_bus"; - - power-domains = <&videocc MVSC_GDSC>, - <&videocc MVS0_GDSC>, - <&rpmhpd SC7280_CX>; - power-domain-names = "venus", "vcodec0", "cx"; - - interconnects = <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_VENUS_CFG 0>, - <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>; - interconnect-names = "cpu-cfg", "video-mem"; - - iommus = <&apps_smmu 0x2180 0x20>, - <&apps_smmu 0x2184 0x20>; - - memory-region = <&video_mem>; - - video-decoder { - compatible = "venus-decoder"; - }; - - video-encoder { - compatible = "venus-encoder"; - }; - - video-firmware { - iommus = <&apps_smmu 0x21a2 0x0>; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,videocc-sc7280.h> + #include <dt-bindings/interconnect/qcom,sc7280.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + venus: video-codec@aa00000 { + compatible = "qcom,sc7280-venus"; + reg = <0x0aa00000 0xd0600>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&videocc VIDEO_CC_MVSC_CORE_CLK>, + <&videocc VIDEO_CC_MVSC_CTL_AXI_CLK>, + <&videocc VIDEO_CC_VENUS_AHB_CLK>, + <&videocc VIDEO_CC_MVS0_CORE_CLK>, + <&videocc VIDEO_CC_MVS0_AXI_CLK>; + clock-names = "core", "bus", "iface", + "vcodec_core", "vcodec_bus"; + + power-domains = <&videocc MVSC_GDSC>, + <&videocc MVS0_GDSC>, + <&rpmhpd SC7280_CX>; + power-domain-names = "venus", "vcodec0", "cx"; + + interconnects = <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_VENUS_CFG 0>, + <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "cpu-cfg", "video-mem"; + + iommus = <&apps_smmu 0x2180 0x20>, + <&apps_smmu 0x2184 0x20>; + + memory-region = <&video_mem>; + + video-decoder { + compatible = "venus-decoder"; + }; + + video-encoder { + compatible = "venus-encoder"; + }; + + video-firmware { + iommus = <&apps_smmu 0x21a2 0x0>; }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml index b28c8e17f158..0a109e126064 100644 --- a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml @@ -2,8 +2,8 @@ %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/qcom,sdm660-camss.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/qcom,sdm660-camss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm CAMSS ISP diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-venus.yaml index 45e3f58f52bd..a51835b22045 100644 --- a/Documentation/devicetree/bindings/media/qcom,sdm660-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sdm660-venus.yaml @@ -1,11 +1,10 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/qcom,sdm660-venus.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/qcom,sdm660-venus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Venus video encode and decode accelerators +title: Qualcomm SDM660 Venus video encode and decode accelerators maintainers: - Stanimir Varbanov <stanimir.varbanov@linaro.org> @@ -15,13 +14,13 @@ description: | The Venus IP is a video encode and decode accelerator present on Qualcomm platforms +allOf: + - $ref: qcom,venus-common.yaml# + properties: compatible: const: qcom,sdm660-venus - reg: - maxItems: 1 - clocks: maxItems: 4 @@ -40,15 +39,9 @@ properties: - const: cpu-cfg - const: video-mem - interrupts: - maxItems: 1 - iommus: maxItems: 20 - memory-region: - maxItems: 1 - power-domains: maxItems: 1 @@ -102,86 +95,65 @@ properties: additionalProperties: false - video-firmware: - type: object - additionalProperties: false - - description: | - Firmware subnode is needed when the platform does not - have TrustZone. - - properties: - iommus: - maxItems: 1 - - required: - - iommus - required: - compatible - - reg - - clocks - - clock-names - - interrupts - iommus - - memory-region - - power-domains - video-decoder - video-encoder -additionalProperties: false +unevaluatedProperties: false examples: - | - #include <dt-bindings/clock/qcom,mmcc-sdm660.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> - - video-codec@cc00000 { - compatible = "qcom,sdm660-venus"; - reg = <0x0cc00000 0xff000>; - clocks = <&mmcc VIDEO_CORE_CLK>, - <&mmcc VIDEO_AHB_CLK>, - <&mmcc VIDEO_AXI_CLK>, - <&mmcc THROTTLE_VIDEO_AXI_CLK>; - clock-names = "core", "iface", "bus", "bus_throttle"; - interconnects = <&gnoc 0 &mnoc 13>, - <&mnoc 4 &bimc 5>; - interconnect-names = "cpu-cfg", "video-mem"; - interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; - iommus = <&mmss_smmu 0x400>, - <&mmss_smmu 0x401>, - <&mmss_smmu 0x40a>, - <&mmss_smmu 0x407>, - <&mmss_smmu 0x40e>, - <&mmss_smmu 0x40f>, - <&mmss_smmu 0x408>, - <&mmss_smmu 0x409>, - <&mmss_smmu 0x40b>, - <&mmss_smmu 0x40c>, - <&mmss_smmu 0x40d>, - <&mmss_smmu 0x410>, - <&mmss_smmu 0x421>, - <&mmss_smmu 0x428>, - <&mmss_smmu 0x429>, - <&mmss_smmu 0x42b>, - <&mmss_smmu 0x42c>, - <&mmss_smmu 0x42d>, - <&mmss_smmu 0x411>, - <&mmss_smmu 0x431>; - memory-region = <&venus_region>; - power-domains = <&mmcc VENUS_GDSC>; - - video-decoder { - compatible = "venus-decoder"; - clocks = <&mmcc VIDEO_SUBCORE0_CLK>; - clock-names = "vcodec0_core"; - power-domains = <&mmcc VENUS_CORE0_GDSC>; - }; - - video-encoder { - compatible = "venus-encoder"; - clocks = <&mmcc VIDEO_SUBCORE0_CLK>; - clock-names = "vcodec0_core"; - power-domains = <&mmcc VENUS_CORE0_GDSC>; - }; + #include <dt-bindings/clock/qcom,mmcc-sdm660.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + video-codec@cc00000 { + compatible = "qcom,sdm660-venus"; + reg = <0x0cc00000 0xff000>; + clocks = <&mmcc VIDEO_CORE_CLK>, + <&mmcc VIDEO_AHB_CLK>, + <&mmcc VIDEO_AXI_CLK>, + <&mmcc THROTTLE_VIDEO_AXI_CLK>; + clock-names = "core", "iface", "bus", "bus_throttle"; + interconnects = <&gnoc 0 &mnoc 13>, + <&mnoc 4 &bimc 5>; + interconnect-names = "cpu-cfg", "video-mem"; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&mmss_smmu 0x400>, + <&mmss_smmu 0x401>, + <&mmss_smmu 0x40a>, + <&mmss_smmu 0x407>, + <&mmss_smmu 0x40e>, + <&mmss_smmu 0x40f>, + <&mmss_smmu 0x408>, + <&mmss_smmu 0x409>, + <&mmss_smmu 0x40b>, + <&mmss_smmu 0x40c>, + <&mmss_smmu 0x40d>, + <&mmss_smmu 0x410>, + <&mmss_smmu 0x421>, + <&mmss_smmu 0x428>, + <&mmss_smmu 0x429>, + <&mmss_smmu 0x42b>, + <&mmss_smmu 0x42c>, + <&mmss_smmu 0x42d>, + <&mmss_smmu 0x411>, + <&mmss_smmu 0x431>; + memory-region = <&venus_region>; + power-domains = <&mmcc VENUS_GDSC>; + + video-decoder { + compatible = "venus-decoder"; + clocks = <&mmcc VIDEO_SUBCORE0_CLK>; + clock-names = "vcodec0_core"; + power-domains = <&mmcc VENUS_CORE0_GDSC>; + }; + + video-encoder { + compatible = "venus-encoder"; + clocks = <&mmcc VIDEO_SUBCORE0_CLK>; + clock-names = "vcodec0_core"; + power-domains = <&mmcc VENUS_CORE0_GDSC>; }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml index f9a003882f84..1530ad0d80bd 100644 --- a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml @@ -2,8 +2,8 @@ %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/qcom,sdm845-camss.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/qcom,sdm845-camss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm CAMSS ISP diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml index 8edc8a2f43a5..d5f80976f4cf 100644 --- a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml @@ -1,11 +1,10 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/qcom,sdm845-venus-v2.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/qcom,sdm845-venus-v2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Venus video encode and decode accelerators +title: Qualcomm SDM845 Venus v2 video encode and decode accelerators maintainers: - Stanimir Varbanov <stanimir.varbanov@linaro.org> @@ -14,16 +13,13 @@ description: | The Venus IP is a video encode and decode accelerator present on Qualcomm platforms +allOf: + - $ref: qcom,venus-common.yaml# + properties: compatible: const: qcom,sdm845-venus-v2 - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - power-domains: minItems: 3 maxItems: 4 @@ -52,8 +48,9 @@ properties: iommus: maxItems: 2 - memory-region: - maxItems: 1 + operating-points-v2: true + opp-table: + type: object video-core0: type: object @@ -79,68 +76,47 @@ properties: additionalProperties: false - video-firmware: - type: object - additionalProperties: false - - description: | - Firmware subnode is needed when the platform does not - have TrustZone. - - properties: - iommus: - maxItems: 1 - - required: - - iommus - required: - compatible - - reg - - interrupts - - power-domains - power-domain-names - - clocks - - clock-names - iommus - - memory-region - video-core0 - video-core1 -additionalProperties: false +unevaluatedProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/clock/qcom,videocc-sdm845.h> - - video-codec@aa00000 { - compatible = "qcom,sdm845-venus-v2"; - reg = <0x0aa00000 0xff000>; - interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, - <&videocc VIDEO_CC_VENUS_AHB_CLK>, - <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>, - <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, - <&videocc VIDEO_CC_VCODEC0_AXI_CLK>, - <&videocc VIDEO_CC_VCODEC1_CORE_CLK>, - <&videocc VIDEO_CC_VCODEC1_AXI_CLK>; - clock-names = "core", "iface", "bus", - "vcodec0_core", "vcodec0_bus", - "vcodec1_core", "vcodec1_bus"; - power-domains = <&videocc VENUS_GDSC>, - <&videocc VCODEC0_GDSC>, - <&videocc VCODEC1_GDSC>; - power-domain-names = "venus", "vcodec0", "vcodec1"; - iommus = <&apps_smmu 0x10a0 0x8>, - <&apps_smmu 0x10b0 0x0>; - memory-region = <&venus_mem>; - - video-core0 { - compatible = "venus-decoder"; - }; - - video-core1 { - compatible = "venus-encoder"; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,videocc-sdm845.h> + + video-codec@aa00000 { + compatible = "qcom,sdm845-venus-v2"; + reg = <0x0aa00000 0xff000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, + <&videocc VIDEO_CC_VENUS_AHB_CLK>, + <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>, + <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC0_AXI_CLK>, + <&videocc VIDEO_CC_VCODEC1_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC1_AXI_CLK>; + clock-names = "core", "iface", "bus", + "vcodec0_core", "vcodec0_bus", + "vcodec1_core", "vcodec1_bus"; + power-domains = <&videocc VENUS_GDSC>, + <&videocc VCODEC0_GDSC>, + <&videocc VCODEC1_GDSC>; + power-domain-names = "venus", "vcodec0", "vcodec1"; + iommus = <&apps_smmu 0x10a0 0x8>, + <&apps_smmu 0x10b0 0x0>; + memory-region = <&venus_mem>; + + video-core0 { + compatible = "venus-decoder"; + }; + + video-core1 { + compatible = "venus-encoder"; }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml index 57d503373efe..eabc0957b241 100644 --- a/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml @@ -1,11 +1,10 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/qcom,sdm845-venus.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/qcom,sdm845-venus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Venus video encode and decode accelerators +title: Qualcomm SDM845 Venus video encode and decode accelerators maintainers: - Stanimir Varbanov <stanimir.varbanov@linaro.org> @@ -14,16 +13,13 @@ description: | The Venus IP is a video encode and decode accelerator present on Qualcomm platforms +allOf: + - $ref: qcom,venus-common.yaml# + properties: compatible: const: qcom,sdm845-venus - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - power-domains: maxItems: 1 @@ -39,9 +35,6 @@ properties: iommus: maxItems: 2 - memory-region: - maxItems: 1 - video-core0: type: object @@ -94,66 +87,45 @@ properties: additionalProperties: false - video-firmware: - type: object - additionalProperties: false - - description: | - Firmware subnode is needed when the platform does not - have TrustZone. - - properties: - iommus: - maxItems: 1 - - required: - - iommus - required: - compatible - - reg - - interrupts - - power-domains - - clocks - - clock-names - iommus - - memory-region - video-core0 - video-core1 -additionalProperties: false +unevaluatedProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/clock/qcom,videocc-sdm845.h> - - video-codec@aa00000 { - compatible = "qcom,sdm845-venus"; - reg = <0x0aa00000 0xff000>; - interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, - <&videocc VIDEO_CC_VENUS_AHB_CLK>, - <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>; - clock-names = "core", "iface", "bus"; - power-domains = <&videocc VENUS_GDSC>; - iommus = <&apps_smmu 0x10a0 0x8>, - <&apps_smmu 0x10b0 0x0>; - memory-region = <&venus_mem>; - - video-core0 { - compatible = "venus-decoder"; - clocks = <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, - <&videocc VIDEO_CC_VCODEC0_AXI_CLK>; - clock-names = "core", "bus"; - power-domains = <&videocc VCODEC0_GDSC>; - }; - - video-core1 { - compatible = "venus-encoder"; - clocks = <&videocc VIDEO_CC_VCODEC1_CORE_CLK>, - <&videocc VIDEO_CC_VCODEC1_AXI_CLK>; - clock-names = "core", "bus"; - power-domains = <&videocc VCODEC1_GDSC>; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,videocc-sdm845.h> + + video-codec@aa00000 { + compatible = "qcom,sdm845-venus"; + reg = <0x0aa00000 0xff000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, + <&videocc VIDEO_CC_VENUS_AHB_CLK>, + <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>; + clock-names = "core", "iface", "bus"; + power-domains = <&videocc VENUS_GDSC>; + iommus = <&apps_smmu 0x10a0 0x8>, + <&apps_smmu 0x10b0 0x0>; + memory-region = <&venus_mem>; + + video-core0 { + compatible = "venus-decoder"; + clocks = <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC0_AXI_CLK>; + clock-names = "core", "bus"; + power-domains = <&videocc VCODEC0_GDSC>; + }; + + video-core1 { + compatible = "venus-encoder"; + clocks = <&videocc VIDEO_CC_VCODEC1_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC1_AXI_CLK>; + clock-names = "core", "bus"; + power-domains = <&videocc VCODEC1_GDSC>; }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml index 07a2af12f37d..fa5073c0fd1e 100644 --- a/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml @@ -2,8 +2,8 @@ %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/qcom,sm8250-camss.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/qcom,sm8250-camss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm CAMSS ISP diff --git a/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml index 4b7a12523dcf..7915dcd2d99f 100644 --- a/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml @@ -1,11 +1,10 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/qcom,sm8250-venus.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/qcom,sm8250-venus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Venus video encode and decode accelerators +title: Qualcomm SM8250 Venus video encode and decode accelerators maintainers: - Stanimir Varbanov <stanimir.varbanov@linaro.org> @@ -14,16 +13,13 @@ description: | The Venus IP is a video encode and decode accelerator present on Qualcomm platforms +allOf: + - $ref: qcom,venus-common.yaml# + properties: compatible: const: qcom,sm8250-venus - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - power-domains: minItems: 2 maxItems: 3 @@ -47,9 +43,6 @@ properties: iommus: maxItems: 1 - memory-region: - maxItems: 1 - interconnects: maxItems: 2 @@ -58,6 +51,10 @@ properties: - const: cpu-cfg - const: video-mem + operating-points-v2: true + opp-table: + type: object + resets: maxItems: 2 @@ -90,78 +87,57 @@ properties: additionalProperties: false - video-firmware: - type: object - additionalProperties: false - - description: | - Firmware subnode is needed when the platform does not - have TrustZone. - - properties: - iommus: - maxItems: 1 - - required: - - iommus - required: - compatible - - reg - - interrupts - - power-domains - power-domain-names - - clocks - - clock-names - interconnects - interconnect-names - iommus - - memory-region - resets - reset-names - video-decoder - video-encoder -additionalProperties: false +unevaluatedProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/clock/qcom,videocc-sm8250.h> - #include <dt-bindings/interconnect/qcom,sm8250.h> - #include <dt-bindings/clock/qcom,gcc-sm8250.h> - #include <dt-bindings/power/qcom-rpmpd.h> - - venus: video-codec@aa00000 { - compatible = "qcom,sm8250-venus"; - reg = <0x0aa00000 0xff000>; - interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&videocc MVS0C_GDSC>, - <&videocc MVS0_GDSC>, - <&rpmhpd SM8250_MX>; - power-domain-names = "venus", "vcodec0", "mx"; - - clocks = <&gcc GCC_VIDEO_AXI0_CLK>, - <&videocc VIDEO_CC_MVS0C_CLK>, - <&videocc VIDEO_CC_MVS0_CLK>; - clock-names = "iface", "core", "vcodec0_core"; - - interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_VENUS_CFG>, - <&mmss_noc MASTER_VIDEO_P0 &mc_virt SLAVE_EBI_CH0>; - interconnect-names = "cpu-cfg", "video-mem"; - - iommus = <&apps_smmu 0x2100 0x0400>; - memory-region = <&video_mem>; - - resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>, - <&videocc VIDEO_CC_MVS0C_CLK_ARES>; - reset-names = "bus", "core"; - - video-decoder { - compatible = "venus-decoder"; - }; - - video-encoder { - compatible = "venus-encoder"; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,videocc-sm8250.h> + #include <dt-bindings/interconnect/qcom,sm8250.h> + #include <dt-bindings/clock/qcom,gcc-sm8250.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + venus: video-codec@aa00000 { + compatible = "qcom,sm8250-venus"; + reg = <0x0aa00000 0xff000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&videocc MVS0C_GDSC>, + <&videocc MVS0_GDSC>, + <&rpmhpd SM8250_MX>; + power-domain-names = "venus", "vcodec0", "mx"; + + clocks = <&gcc GCC_VIDEO_AXI0_CLK>, + <&videocc VIDEO_CC_MVS0C_CLK>, + <&videocc VIDEO_CC_MVS0_CLK>; + clock-names = "iface", "core", "vcodec0_core"; + + interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_VENUS_CFG>, + <&mmss_noc MASTER_VIDEO_P0 &mc_virt SLAVE_EBI_CH0>; + interconnect-names = "cpu-cfg", "video-mem"; + + iommus = <&apps_smmu 0x2100 0x0400>; + memory-region = <&video_mem>; + + resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>, + <&videocc VIDEO_CC_MVS0C_CLK_ARES>; + reset-names = "bus", "core"; + + video-decoder { + compatible = "venus-decoder"; + }; + + video-encoder { + compatible = "venus-encoder"; }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,venus-common.yaml b/Documentation/devicetree/bindings/media/qcom,venus-common.yaml new file mode 100644 index 000000000000..3153d91f9d18 --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,venus-common.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/qcom,venus-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SoC Venus Video Encode and Decode Accelerators Common Properties + +maintainers: + - Stanimir Varbanov <stanimir.k.varbanov@gmail.com> + - Vikash Garodia <quic_vgarodia@quicinc.com> + +description: | + The Venus IP is a video encode and decode accelerator present + on Qualcomm platforms + +properties: + reg: + maxItems: 1 + + clocks: + minItems: 3 + maxItems: 7 + + clock-names: + minItems: 3 + maxItems: 7 + + firmware-name: + maxItems: 1 + + interrupts: + maxItems: 1 + + iommus: + minItems: 1 + maxItems: 20 + + memory-region: + maxItems: 1 + + power-domains: + minItems: 1 + maxItems: 4 + + power-domain-names: + minItems: 1 + maxItems: 4 + + video-firmware: + type: object + additionalProperties: false + + description: | + Firmware subnode is needed when the platform does not + have TrustZone. + + properties: + iommus: + maxItems: 1 + + required: + - iommus + +required: + - reg + - clocks + - clock-names + - interrupts + - memory-region + - power-domains + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/media/rc.yaml b/Documentation/devicetree/bindings/media/rc.yaml index e732b7f3a635..7bbe580c80f7 100644 --- a/Documentation/devicetree/bindings/media/rc.yaml +++ b/Documentation/devicetree/bindings/media/rc.yaml @@ -18,7 +18,7 @@ properties: description: Specifies the scancode/key mapping table defined in-kernel for the remote controller. - $ref: '/schemas/types.yaml#/definitions/string' + $ref: /schemas/types.yaml#/definitions/string enum: - rc-adstech-dvb-t-pci - rc-alink-dtu-m @@ -39,6 +39,7 @@ properties: - rc-avertv-303 - rc-azurewave-ad-tu700 - rc-beelink-gs1 + - rc-beelink-mxiii - rc-behold - rc-behold-columbus - rc-budget-ci-old @@ -55,6 +56,7 @@ properties: - rc-dm1105-nec - rc-dntv-live-dvb-t - rc-dntv-live-dvbt-pro + - rc-dreambox - rc-dtt200u - rc-dvbsky - rc-dvico-mce diff --git a/Documentation/devicetree/bindings/media/renesas,csi2.yaml b/Documentation/devicetree/bindings/media/renesas,csi2.yaml index b520d6c5c102..977ab188d654 100644 --- a/Documentation/devicetree/bindings/media/renesas,csi2.yaml +++ b/Documentation/devicetree/bindings/media/renesas,csi2.yaml @@ -31,6 +31,7 @@ properties: - renesas,r8a77980-csi2 # R-Car V3H - renesas,r8a77990-csi2 # R-Car E3 - renesas,r8a779a0-csi2 # R-Car V3U + - renesas,r8a779g0-csi2 # R-Car V4H reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/renesas,fcp.yaml b/Documentation/devicetree/bindings/media/renesas,fcp.yaml index 43f2fed8cd33..c6abe719881b 100644 --- a/Documentation/devicetree/bindings/media/renesas,fcp.yaml +++ b/Documentation/devicetree/bindings/media/renesas,fcp.yaml @@ -21,15 +21,22 @@ description: | properties: compatible: - enum: - - renesas,fcpv # FCP for VSP - - renesas,fcpf # FCP for FDP + oneOf: + - enum: + - renesas,fcpv # FCP for VSP + - renesas,fcpf # FCP for FDP + - items: + - enum: + - renesas,r9a07g044-fcpvd # RZ/G2{L,LC} + - renesas,r9a07g054-fcpvd # RZ/V2L + - const: renesas,fcpv # Generic FCP for VSP fallback reg: maxItems: 1 - clocks: - maxItems: 1 + clocks: true + + clock-names: true iommus: maxItems: 1 @@ -49,6 +56,34 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - renesas,r9a07g044-fcpvd + - renesas,r9a07g054-fcpvd + then: + properties: + clocks: + items: + - description: Main clock + - description: Register access clock + - description: Video clock + clock-names: + items: + - const: aclk + - const: pclk + - const: vclk + required: + - clock-names + else: + properties: + clocks: + maxItems: 1 + clock-names: false + examples: # R8A7795 (R-Car H3) FCP for VSP-D1 - | diff --git a/Documentation/devicetree/bindings/media/renesas,isp.yaml b/Documentation/devicetree/bindings/media/renesas,isp.yaml index 514857d36f6b..33650a1ea034 100644 --- a/Documentation/devicetree/bindings/media/renesas,isp.yaml +++ b/Documentation/devicetree/bindings/media/renesas,isp.yaml @@ -21,6 +21,7 @@ properties: items: - enum: - renesas,r8a779a0-isp # V3U + - renesas,r8a779g0-isp # V4H reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml index c0442e79cbb4..7073d1936c34 100644 --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml @@ -53,6 +53,7 @@ properties: - renesas,vin-r8a77990 # R-Car E3 - renesas,vin-r8a77995 # R-Car D3 - renesas,vin-r8a779a0 # R-Car V3U + - renesas,vin-r8a779g0 # R-Car V4H reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/renesas,vsp1.yaml b/Documentation/devicetree/bindings/media/renesas,vsp1.yaml index 7a8f32473852..3265e922647c 100644 --- a/Documentation/devicetree/bindings/media/renesas,vsp1.yaml +++ b/Documentation/devicetree/bindings/media/renesas,vsp1.yaml @@ -16,10 +16,15 @@ description: properties: compatible: - enum: - - renesas,r9a07g044-vsp2 # RZ/G2L - - renesas,vsp1 # R-Car Gen2 and RZ/G1 - - renesas,vsp2 # R-Car Gen3 and RZ/G2 + oneOf: + - enum: + - renesas,r9a07g044-vsp2 # RZ/G2L + - renesas,vsp1 # R-Car Gen2 and RZ/G1 + - renesas,vsp2 # R-Car Gen3 and RZ/G2 + - items: + - enum: + - renesas,r9a07g054-vsp2 # RZ/V2L + - const: renesas,r9a07g044-vsp2 # RZ/G2L fallback reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/rockchip,rk3568-vepu.yaml b/Documentation/devicetree/bindings/media/rockchip,rk3568-vepu.yaml index 81b26eb4cd35..9d90d8d0565a 100644 --- a/Documentation/devicetree/bindings/media/rockchip,rk3568-vepu.yaml +++ b/Documentation/devicetree/bindings/media/rockchip,rk3568-vepu.yaml @@ -2,8 +2,8 @@ %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/rockchip,rk3568-vepu.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/rockchip,rk3568-vepu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Hantro G1 VPU encoders implemented on Rockchip SoCs diff --git a/Documentation/devicetree/bindings/media/rockchip-isp1.yaml b/Documentation/devicetree/bindings/media/rockchip-isp1.yaml index b3661d7d4357..0bad7e640148 100644 --- a/Documentation/devicetree/bindings/media/rockchip-isp1.yaml +++ b/Documentation/devicetree/bindings/media/rockchip-isp1.yaml @@ -212,12 +212,19 @@ examples: compatible = "ovti,ov2685"; reg = <0x3c>; - port { - ucam_out: endpoint { - remote-endpoint = <&mipi_in_ucam>; - data-lanes = <1>; - }; - }; + clocks = <&cru SCLK_TESTCLKOUT1>; + clock-names = "xvclk"; + + avdd-supply = <&pp2800_cam>; + dovdd-supply = <&pp1800>; + dvdd-supply = <&pp1800>; + + port { + ucam_out: endpoint { + remote-endpoint = <&mipi_in_ucam>; + data-lanes = <1>; + }; + }; }; }; }; diff --git a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml index 6cc4d3e5a61d..ee622a8ee1cc 100644 --- a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml +++ b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml @@ -2,8 +2,8 @@ %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/rockchip-vpu.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/rockchip-vpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Hantro G1 VPU codecs implemented on Rockchip SoCs diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml new file mode 100644 index 000000000000..dd6cc7ac1f7c --- /dev/null +++ b/Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml @@ -0,0 +1,170 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/samsung,exynos4210-csis.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5P/Exynos SoC series MIPI CSI-2 receiver (MIPI CSIS) + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + +properties: + compatible: + enum: + - samsung,s5pv210-csis + - samsung,exynos4210-csis + - samsung,exynos4212-csis + - samsung,exynos5250-csis + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + bus-width: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2, 4] + description: + Number of data lines supported. + + clocks: + maxItems: 2 + + clock-names: + items: + - const: csis + - const: sclk_csis + + clock-frequency: + default: 166000000 + description: + The IP's main (system bus) clock frequency in Hz. + + interrupts: + maxItems: 1 + + phys: + maxItems: 1 + + phy-names: + items: + - const: csis + + power-domains: + maxItems: 1 + + vddio-supply: + description: MIPI CSIS I/O and PLL voltage supply (e.g. 1.8V). + + vddcore-supply: + description: MIPI CSIS Core voltage supply (e.g. 1.1V). + +patternProperties: + "^port@[34]$": + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + description: + Camera input port. + + properties: + reg: + enum: [3, 4] + + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + samsung,csis-hs-settle: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Differential receiver (HS-RX) settle time. + + samsung,csis-wclk: + type: boolean + description: + CSI-2 wrapper clock selection. If this property is present external clock + from CMU will be used, or the bus clock if it's not specified. + + required: + - data-lanes + + required: + - reg + +required: + - compatible + - reg + - bus-width + - clocks + - clock-names + - interrupts + - vddio-supply + - vddcore-supply + +anyOf: + - required: + - port@3 + - required: + - port@4 + +allOf: + - if: + required: + - samsung,isp-wb + then: + required: + - samsung,sysreg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos4.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + csis@11890000 { + compatible = "samsung,exynos4210-csis"; + reg = <0x11890000 0x4000>; + clocks = <&clock CLK_CSIS1>, + <&clock CLK_SCLK_CSIS1>; + clock-names = "csis", "sclk_csis"; + assigned-clocks = <&clock CLK_MOUT_CSIS1>, + <&clock CLK_SCLK_CSIS1>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; + + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + + bus-width = <2>; + power-domains = <&pd_cam>; + phys = <&mipi_phy 2>; + phy-names = "csis"; + + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + + #address-cells = <1>; + #size-cells = <0>; + + /* Camera D (4) MIPI CSI-2 (CSIS1) */ + port@4 { + reg = <4>; + + endpoint { + remote-endpoint = <&is_s5k6a3_ep>; + data-lanes = <1>; + samsung,csis-hs-settle = <18>; + samsung,csis-wclk; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml new file mode 100644 index 000000000000..271d0577a83c --- /dev/null +++ b/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml @@ -0,0 +1,152 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/samsung,exynos4210-fimc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5P/Exynos SoC Fully Integrated Mobile Camera + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + +description: + Each FIMC device should have an alias in the aliases node, in the form of + fimc<n>, where <n> is an integer specifying the IP block instance. + +properties: + compatible: + enum: + - samsung,exynos4210-fimc + - samsung,exynos4212-fimc + - samsung,s5pv210-fimc + + reg: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: fimc + - const: sclk_fimc + + clock-frequency: + description: + Maximum FIMC local clock (LCLK) frequency. + + interrupts: + maxItems: 1 + + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + + samsung,cam-if: + type: boolean + description: + The FIMC IP block includes the camera input interface. + + samsung,isp-wb: + type: boolean + description: | + The FIMC IP block has the ISP writeback input. + + samsung,lcd-wb: + type: boolean + description: | + The FIMC IP block has the LCD writeback input. + + samsung,mainscaler-ext: + type: boolean + description: + FIMC IP supports extended image size and has CIEXTEN register. + + samsung,min-pix-alignment: + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: Minimum supported image height alignment. + - description: Horizontal image offset. + description: + The values are in pixels and default is <2 1>. + + samsung,min-pix-sizes: + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 2 + description: | + An array specyfing minimum image size in pixels at the FIMC input and + output DMA, in the first and second cell respectively. Default value + is <16 16>. + + samsung,pix-limits: + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 4 + description: | + An array of maximum supported image sizes in pixels, for details refer to + Table 2-1 in the S5PV210 SoC User Manual. The meaning of each cell is as + follows: + 0 - scaler input horizontal size + 1 - input horizontal size for the scaler bypassed + 2 - REAL_WIDTH without input rotation + 3 - REAL_HEIGHT with input rotation + + samsung,rotators: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0x11 + description: | + A bitmask specifying whether this IP has the input and the output + rotator. Bits 4 and 0 correspond to input and output rotator + respectively. If a rotator is present its corresponding bit should be + set. + + samsung,sysreg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + System Registers (SYSREG) node. + +required: + - compatible + - reg + - clocks + - clock-names + - samsung,pix-limits + +allOf: + - if: + required: + - samsung,isp-wb + then: + required: + - samsung,sysreg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos4.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + fimc@11800000 { + compatible = "samsung,exynos4212-fimc"; + reg = <0x11800000 0x1000>; + clocks = <&clock CLK_FIMC0>, + <&clock CLK_SCLK_FIMC0>; + clock-names = "fimc", "sclk_fimc"; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&sysmmu_fimc0>; + power-domains = <&pd_cam>; + samsung,sysreg = <&sys_reg>; + + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,cam-if; + + assigned-clocks = <&clock CLK_MOUT_FIMC0>, + <&clock CLK_SCLK_FIMC0>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; + }; diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml new file mode 100644 index 000000000000..3691cd4962b2 --- /dev/null +++ b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml @@ -0,0 +1,220 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/samsung,exynos4212-fimc-is.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos4212/4412 SoC Imaging Subsystem (FIMC-IS) + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + +description: + The FIMC-IS is a subsystem for processing image signal from an image sensor. + The Exynos4x12 SoC series FIMC-IS V1.5 comprises of a dedicated ARM Cortex-A5 + processor, ISP, DRC and FD IP blocks and peripheral devices such as UART, I2C + and SPI bus controllers, PWM and ADC. + +properties: + compatible: + enum: + - samsung,exynos4212-fimc-is + + reg: + maxItems: 1 + + ranges: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + clocks: + maxItems: 21 + + clock-names: + items: + - const: lite0 + - const: lite1 + - const: ppmuispx + - const: ppmuispmx + - const: isp + - const: drc + - const: fd + - const: mcuisp + - const: gicisp + - const: mcuctl_isp + - const: pwm_isp + - const: ispdiv0 + - const: ispdiv1 + - const: mcuispdiv0 + - const: mcuispdiv1 + - const: mpll + - const: aclk200 + - const: aclk400mcuisp + - const: div_aclk200 + - const: div_aclk400mcuisp + - const: uart + + interrupts: + maxItems: 2 + + iommus: + maxItems: 4 + + iommu-names: + items: + - const: isp + - const: drc + - const: fd + - const: mcuctl + + power-domains: + maxItems: 1 + +patternProperties: + "^pmu@[0-9a-f]+$": + type: object + additionalProperties: false + description: + Node representing the SoC's Power Management Unit (duplicated with the + correct PMU node in the SoC). + + properties: + reg: + maxItems: 1 + + required: + - reg + + "^i2c-isp@[0-9a-f]+$": + type: object + $ref: /schemas/i2c/i2c-controller.yaml# + unevaluatedProperties: false + description: + ISP I2C bus controller + + properties: + compatible: + const: samsung,exynos4212-i2c-isp + + reg: + maxItems: 1 + + + clocks: + maxItems: 1 + + clock-names: + items: + - const: i2c_isp + + pinctrl-0: true + pinctrl-names: + items: + - const: default + + required: + - compatible + - reg + - clocks + - clock-names + +required: + - compatible + - reg + - '#address-cells' + - clocks + - clock-names + - interrupts + - ranges + - '#size-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos4.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + fimc-is@12000000 { + compatible = "samsung,exynos4212-fimc-is"; + reg = <0x12000000 0x260000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&isp_clock CLK_ISP_FIMC_LITE0>, + <&isp_clock CLK_ISP_FIMC_LITE1>, + <&isp_clock CLK_ISP_PPMUISPX>, + <&isp_clock CLK_ISP_PPMUISPMX>, + <&isp_clock CLK_ISP_FIMC_ISP>, + <&isp_clock CLK_ISP_FIMC_DRC>, + <&isp_clock CLK_ISP_FIMC_FD>, + <&isp_clock CLK_ISP_MCUISP>, + <&isp_clock CLK_ISP_GICISP>, + <&isp_clock CLK_ISP_MCUCTL_ISP>, + <&isp_clock CLK_ISP_PWM_ISP>, + <&isp_clock CLK_ISP_DIV_ISP0>, + <&isp_clock CLK_ISP_DIV_ISP1>, + <&isp_clock CLK_ISP_DIV_MCUISP0>, + <&isp_clock CLK_ISP_DIV_MCUISP1>, + <&clock CLK_MOUT_MPLL_USER_T>, + <&clock CLK_ACLK200>, + <&clock CLK_ACLK400_MCUISP>, + <&clock CLK_DIV_ACLK200>, + <&clock CLK_DIV_ACLK400_MCUISP>, + <&clock CLK_UART_ISP_SCLK>; + clock-names = "lite0", "lite1", "ppmuispx", + "ppmuispmx", "isp", + "drc", "fd", "mcuisp", + "gicisp", "mcuctl_isp", "pwm_isp", + "ispdiv0", "ispdiv1", "mcuispdiv0", + "mcuispdiv1", "mpll", "aclk200", + "aclk400mcuisp", "div_aclk200", + "div_aclk400mcuisp", "uart"; + iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>, + <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>; + iommu-names = "isp", "drc", "fd", "mcuctl"; + power-domains = <&pd_isp>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pmu@10020000 { + reg = <0x10020000 0x3000>; + }; + + i2c-isp@12140000 { + compatible = "samsung,exynos4212-i2c-isp"; + reg = <0x12140000 0x100>; + clocks = <&isp_clock CLK_ISP_I2C1_ISP>; + clock-names = "i2c_isp"; + pinctrl-0 = <&fimc_is_i2c1>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + image-sensor@10 { + compatible = "samsung,s5k6a3"; + reg = <0x10>; + svdda-supply = <&cam_io_reg>; + svddio-supply = <&ldo19_reg>; + afvdd-supply = <&ldo19_reg>; + clock-frequency = <24000000>; + clocks = <&camera 1>; + clock-names = "extclk"; + gpios = <&gpm1 6 GPIO_ACTIVE_LOW>; + + port { + endpoint { + remote-endpoint = <&csis1_ep>; + data-lanes = <1>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml new file mode 100644 index 000000000000..f80eca0a4f41 --- /dev/null +++ b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/samsung,exynos4212-fimc-lite.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC series camera host interface (FIMC-LITE) + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + +description: + Each FIMC device should have an alias in the aliases node, in the form of + fimc-lite<n>, where <n> is an integer specifying the IP block instance. + +properties: + compatible: + enum: + - samsung,exynos4212-fimc-lite + - samsung,exynos5250-fimc-lite + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: flite + + interrupts: + maxItems: 1 + + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos4.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + fimc-lite@12390000 { + compatible = "samsung,exynos4212-fimc-lite"; + reg = <0x12390000 0x1000>; + clocks = <&isp_clock CLK_ISP_FIMC_LITE0>; + clock-names = "flite"; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_isp>; + iommus = <&sysmmu_fimc_lite0>; + }; diff --git a/Documentation/devicetree/bindings/media/samsung,fimc.yaml b/Documentation/devicetree/bindings/media/samsung,fimc.yaml new file mode 100644 index 000000000000..79ff6d83a9fd --- /dev/null +++ b/Documentation/devicetree/bindings/media/samsung,fimc.yaml @@ -0,0 +1,279 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/samsung,fimc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5P/Exynos SoC Camera Subsystem (FIMC) + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + +description: | + The S5P/Exynos SoC Camera subsystem comprises of multiple sub-devices + represented by separate device tree nodes. Currently this includes: Fully + Integrated Mobile Camera (FIMC, in the S5P SoCs series known as CAMIF), MIPI + CSIS, FIMC-LITE and FIMC-IS (ISP). + +properties: + compatible: + const: samsung,fimc + + ranges: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + '#clock-cells': + const: 1 + description: | + The clock specifier cell stores an index of a clock: 0, 1 for + CAM_A_CLKOUT, CAM_B_CLKOUT clocks respectively. + + clocks: + minItems: 2 + maxItems: 4 + + clock-names: + minItems: 2 + items: + - const: sclk_cam0 + - const: sclk_cam1 + - const: pxl_async0 + - const: pxl_async1 + + clock-output-names: + maxItems: 2 + + parallel-ports: + $ref: /schemas/graph.yaml#/properties/ports + description: + Active parallel video input ports. + + patternProperties: + "^port@[01]$": + $ref: /schemas/graph.yaml#/$defs/port-base + description: + Camera A and camera B inputs. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + pinctrl-names: + minItems: 1 + items: + - const: default + - const: idle + - const: active_a + - const: active_b + +patternProperties: + "^csis@[0-9a-f]+$": + type: object + $ref: samsung,exynos4210-csis.yaml# + description: MIPI CSI-2 receiver. + + "^fimc@[0-9a-f]+$": + type: object + $ref: samsung,exynos4210-fimc.yaml# + description: Fully Integrated Mobile Camera. + + "^fimc-is@[0-9a-f]+$": + type: object + $ref: samsung,exynos4212-fimc-is.yaml# + description: Imaging Subsystem (FIMC-IS). + + "^fimc-lite@[0-9a-f]+$": + type: object + $ref: samsung,exynos4212-fimc-lite.yaml# + description: Camera host interface (FIMC-LITE). + +required: + - compatible + - '#address-cells' + - '#clock-cells' + - clocks + - clock-names + - clock-output-names + - ranges + - '#size-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos4.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + camera@11800000 { + compatible = "samsung,fimc"; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x18000000>; + + clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>, + <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>; + clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1"; + clock-output-names = "cam_a_clkout", "cam_b_clkout"; + + assigned-clocks = <&clock CLK_MOUT_CAM0>, + <&clock CLK_MOUT_CAM1>; + assigned-clock-parents = <&clock CLK_XUSBXTI>, + <&clock CLK_XUSBXTI>; + + pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>; + pinctrl-names = "default"; + + fimc@11800000 { + compatible = "samsung,exynos4212-fimc"; + reg = <0x11800000 0x1000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_FIMC0>, + <&clock CLK_SCLK_FIMC0>; + clock-names = "fimc", "sclk_fimc"; + power-domains = <&pd_cam>; + samsung,sysreg = <&sys_reg>; + iommus = <&sysmmu_fimc0>; + + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,cam-if; + }; + + /* ... FIMC 1-3 */ + + csis@11880000 { + compatible = "samsung,exynos4210-csis"; + reg = <0x11880000 0x4000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_CSIS0>, + <&clock CLK_SCLK_CSIS0>; + clock-names = "csis", "sclk_csis"; + assigned-clocks = <&clock CLK_MOUT_CSIS0>, + <&clock CLK_SCLK_CSIS0>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; + + bus-width = <4>; + power-domains = <&pd_cam>; + phys = <&mipi_phy 0>; + phy-names = "csis"; + #address-cells = <1>; + #size-cells = <0>; + + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + + /* Camera C (3) MIPI CSI-2 (CSIS0) */ + port@3 { + reg = <3>; + endpoint { + remote-endpoint = <&s5c73m3_ep>; + data-lanes = <1 2 3 4>; + samsung,csis-hs-settle = <12>; + }; + }; + }; + + /* ... CSIS 1 */ + + fimc-lite@12390000 { + compatible = "samsung,exynos4212-fimc-lite"; + reg = <0x12390000 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_isp>; + clocks = <&isp_clock CLK_ISP_FIMC_LITE0>; + clock-names = "flite"; + iommus = <&sysmmu_fimc_lite0>; + }; + + /* ... FIMC-LITE 1 */ + + fimc-is@12000000 { + compatible = "samsung,exynos4212-fimc-is"; + reg = <0x12000000 0x260000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&isp_clock CLK_ISP_FIMC_LITE0>, + <&isp_clock CLK_ISP_FIMC_LITE1>, + <&isp_clock CLK_ISP_PPMUISPX>, + <&isp_clock CLK_ISP_PPMUISPMX>, + <&isp_clock CLK_ISP_FIMC_ISP>, + <&isp_clock CLK_ISP_FIMC_DRC>, + <&isp_clock CLK_ISP_FIMC_FD>, + <&isp_clock CLK_ISP_MCUISP>, + <&isp_clock CLK_ISP_GICISP>, + <&isp_clock CLK_ISP_MCUCTL_ISP>, + <&isp_clock CLK_ISP_PWM_ISP>, + <&isp_clock CLK_ISP_DIV_ISP0>, + <&isp_clock CLK_ISP_DIV_ISP1>, + <&isp_clock CLK_ISP_DIV_MCUISP0>, + <&isp_clock CLK_ISP_DIV_MCUISP1>, + <&clock CLK_MOUT_MPLL_USER_T>, + <&clock CLK_ACLK200>, + <&clock CLK_ACLK400_MCUISP>, + <&clock CLK_DIV_ACLK200>, + <&clock CLK_DIV_ACLK400_MCUISP>, + <&clock CLK_UART_ISP_SCLK>; + clock-names = "lite0", "lite1", "ppmuispx", + "ppmuispmx", "isp", + "drc", "fd", "mcuisp", + "gicisp", "mcuctl_isp", "pwm_isp", + "ispdiv0", "ispdiv1", "mcuispdiv0", + "mcuispdiv1", "mpll", "aclk200", + "aclk400mcuisp", "div_aclk200", + "div_aclk400mcuisp", "uart"; + iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>, + <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>; + iommu-names = "isp", "drc", "fd", "mcuctl"; + power-domains = <&pd_isp>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pmu@10020000 { + reg = <0x10020000 0x3000>; + }; + + i2c-isp@12140000 { + compatible = "samsung,exynos4212-i2c-isp"; + reg = <0x12140000 0x100>; + clocks = <&isp_clock CLK_ISP_I2C1_ISP>; + clock-names = "i2c_isp"; + pinctrl-0 = <&fimc_is_i2c1>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + image-sensor@10 { + compatible = "samsung,s5k6a3"; + reg = <0x10>; + svdda-supply = <&cam_io_reg>; + svddio-supply = <&ldo19_reg>; + afvdd-supply = <&ldo19_reg>; + clock-frequency = <24000000>; + /* CAM_B_CLKOUT */ + clocks = <&camera 1>; + clock-names = "extclk"; + gpios = <&gpm1 6 GPIO_ACTIVE_LOW>; + + port { + endpoint { + remote-endpoint = <&csis1_ep>; + data-lanes = <1>; + }; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/samsung,s5c73m3.yaml b/Documentation/devicetree/bindings/media/samsung,s5c73m3.yaml new file mode 100644 index 000000000000..1b75390fdaac --- /dev/null +++ b/Documentation/devicetree/bindings/media/samsung,s5c73m3.yaml @@ -0,0 +1,165 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/samsung,s5c73m3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5C73M3 8Mp camera ISP + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + +description: + The S5C73M3 camera ISP supports MIPI CSI-2 and parallel (ITU-R BT.656) + video data busses. The I2C bus is the main control bus and additionally the + SPI bus is used, mostly for transferring the firmware to and from the + device. Two slave device nodes corresponding to these control bus + interfaces are required and should be placed under respective bus + controller nodes. + +properties: + compatible: + const: samsung,s5c73m3 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: cis_extclk + + clock-frequency: + default: 24000000 + description: cis_extclk clock frequency. + + standby-gpios: + maxItems: 1 + description: STANDBY pin. + + vdda-supply: + description: Analog power supply (1.2V). + + vdd-af-supply: + description: lens power supply (2.8V). + + vddio-cis-supply: + description: CIS I/O power supply (1.2V to 1.8V). + + vddio-host-supply: + description: Host I/O power supply (1.8V to 2.8V). + + vdd-int-supply: + description: Digital power supply (1.2V). + + vdd-reg-supply: + description: Regulator input power supply (2.8V). + + xshutdown-gpios: + maxItems: 1 + description: XSHUTDOWN pin. + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - if: + required: + - spi-max-frequency + then: + properties: + # The SPI node is simplified firmware-transfer interface only + clocks: false + clock-names: false + standby-gpios: false + vdda-supply: false + vdd-af-supply: false + vddio-cis-supply: false + vddio-host-supply: false + vdd-int-supply: false + vdd-reg-supply: false + xshutdown-gpios: false + port: false + else: + required: + - clocks + - clock-names + - standby-gpios + - vdda-supply + - vdd-af-supply + - vddio-cis-supply + - vddio-host-supply + - vdd-int-supply + - vdd-reg-supply + - xshutdown-gpios + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + image-sensor@3c { + compatible = "samsung,s5c73m3"; + reg = <0x3c>; + clock-frequency = <24000000>; + clocks = <&camera 0>; + clock-names = "cis_extclk"; + standby-gpios = <&gpm0 6 GPIO_ACTIVE_LOW>; + vdda-supply = <&cam_vdda_reg>; + vdd-af-supply = <&cam_af_reg>; + vddio-cis-supply = <&ldo9_reg>; + vddio-host-supply = <&ldo18_reg>; + vdd-int-supply = <&buck9_reg>; + vdd-reg-supply = <&cam_io_reg>; + xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */ + + port { + s5c73m3_ep: endpoint { + remote-endpoint = <&csis0_ep>; + data-lanes = <1 2 3 4>; + }; + }; + }; + }; + + spi { + #address-cells = <1>; + #size-cells = <0>; + + image-sensor@0 { + compatible = "samsung,s5c73m3"; + reg = <0>; + spi-max-frequency = <50000000>; + controller-data { + samsung,spi-feedback-delay = <2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt deleted file mode 100644 index 20447529c985..000000000000 --- a/Documentation/devicetree/bindings/media/samsung-fimc.txt +++ /dev/null @@ -1,209 +0,0 @@ -Samsung S5P/Exynos SoC Camera Subsystem (FIMC) ----------------------------------------------- - -The S5P/Exynos SoC Camera subsystem comprises of multiple sub-devices -represented by separate device tree nodes. Currently this includes: FIMC (in -the S5P SoCs series known as CAMIF), MIPI CSIS, FIMC-LITE and FIMC-IS (ISP). - -The sub-subdevices are defined as child nodes of the common 'camera' node which -also includes common properties of the whole subsystem not really specific to -any single sub-device, like common camera port pins or the CAMCLK clock outputs -for external image sensors attached to an SoC. - -Common 'camera' node --------------------- - -Required properties: - -- compatible: must be "samsung,fimc", "simple-bus" -- clocks: list of clock specifiers, corresponding to entries in - the clock-names property; -- clock-names : must contain "sclk_cam0", "sclk_cam1", "pxl_async0", - "pxl_async1" entries, matching entries in the clocks property. - -- #clock-cells: from the common clock bindings (../clock/clock-bindings.txt), - must be 1. A clock provider is associated with the 'camera' node and it should - be referenced by external sensors that use clocks provided by the SoC on - CAM_*_CLKOUT pins. The clock specifier cell stores an index of a clock. - The indices are 0, 1 for CAM_A_CLKOUT, CAM_B_CLKOUT clocks respectively. - -- clock-output-names: from the common clock bindings, should contain names of - clocks registered by the camera subsystem corresponding to CAM_A_CLKOUT, - CAM_B_CLKOUT output clocks respectively. - -The pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt must be used -to define a required pinctrl state named "default" and optional pinctrl states: -"idle", "active-a", active-b". These optional states can be used to switch the -camera port pinmux at runtime. The "idle" state should configure both the camera -ports A and B into high impedance state, especially the CAMCLK clock output -should be inactive. For the "active-a" state the camera port A must be activated -and the port B deactivated and for the state "active-b" it should be the other -way around. - -The 'camera' node must include at least one 'fimc' child node. - - -'fimc' device nodes -------------------- - -Required properties: - -- compatible: "samsung,s5pv210-fimc" for S5PV210, "samsung,exynos4210-fimc" - for Exynos4210 and "samsung,exynos4212-fimc" for Exynos4x12 SoCs; -- reg: physical base address and length of the registers set for the device; -- interrupts: should contain FIMC interrupt; -- clocks: list of clock specifiers, must contain an entry for each required - entry in clock-names; -- clock-names: must contain "fimc", "sclk_fimc" entries. -- samsung,pix-limits: an array of maximum supported image sizes in pixels, for - details refer to Table 2-1 in the S5PV210 SoC User Manual; The meaning of - each cell is as follows: - 0 - scaler input horizontal size, - 1 - input horizontal size for the scaler bypassed, - 2 - REAL_WIDTH without input rotation, - 3 - REAL_HEIGHT with input rotation, -- samsung,sysreg: a phandle to the SYSREG node. - -Each FIMC device should have an alias in the aliases node, in the form of -fimc<n>, where <n> is an integer specifying the IP block instance. - -Optional properties: - -- clock-frequency: maximum FIMC local clock (LCLK) frequency; -- samsung,min-pix-sizes: an array specyfing minimum image size in pixels at - the FIMC input and output DMA, in the first and second cell respectively. - Default value when this property is not present is <16 16>; -- samsung,min-pix-alignment: minimum supported image height alignment (first - cell) and the horizontal image offset (second cell). The values are in pixels - and default to <2 1> when this property is not present; -- samsung,mainscaler-ext: a boolean property indicating whether the FIMC IP - supports extended image size and has CIEXTEN register; -- samsung,rotators: a bitmask specifying whether this IP has the input and - the output rotator. Bits 4 and 0 correspond to input and output rotator - respectively. If a rotator is present its corresponding bit should be set. - Default value when this property is not specified is 0x11. -- samsung,cam-if: a bolean property indicating whether the IP block includes - the camera input interface. -- samsung,isp-wb: this property must be present if the IP block has the ISP - writeback input. -- samsung,lcd-wb: this property must be present if the IP block has the LCD - writeback input. - - -'parallel-ports' node ---------------------- - -This node should contain child 'port' nodes specifying active parallel video -input ports. It includes camera A and camera B inputs. 'reg' property in the -port nodes specifies data input - 1, 2 indicates input A, B respectively. - -Optional properties - -- samsung,camclk-out (deprecated) : specifies clock output for remote sensor, - 0 - CAM_A_CLKOUT, 1 - CAM_B_CLKOUT; - -Image sensor nodes ------------------- - -The sensor device nodes should be added to their control bus controller (e.g. -I2C0) nodes and linked to a port node in the csis or the parallel-ports node, -using the common video interfaces bindings, defined in video-interfaces.txt. - -Example: - - aliases { - fimc0 = &fimc_0; - }; - - /* Parallel bus IF sensor */ - i2c_0: i2c@13860000 { - s5k6aa: sensor@3c { - compatible = "samsung,s5k6aafx"; - reg = <0x3c>; - vddio-supply = <...>; - - clock-frequency = <24000000>; - clocks = <&camera 1>; - clock-names = "mclk"; - - port { - s5k6aa_ep: endpoint { - remote-endpoint = <&fimc0_ep>; - bus-width = <8>; - hsync-active = <0>; - vsync-active = <1>; - pclk-sample = <1>; - }; - }; - }; - - /* MIPI CSI-2 bus IF sensor */ - s5c73m3: sensor@1a { - compatible = "samsung,s5c73m3"; - reg = <0x1a>; - vddio-supply = <...>; - - clock-frequency = <24000000>; - clocks = <&camera 0>; - clock-names = "mclk"; - - port { - s5c73m3_1: endpoint { - data-lanes = <1 2 3 4>; - remote-endpoint = <&csis0_ep>; - }; - }; - }; - }; - - camera { - compatible = "samsung,fimc", "simple-bus"; - clocks = <&clock 132>, <&clock 133>, <&clock 351>, - <&clock 352>; - clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", - "pxl_async1"; - #clock-cells = <1>; - clock-output-names = "cam_a_clkout", "cam_b_clkout"; - pinctrl-names = "default"; - pinctrl-0 = <&cam_port_a_clk_active>; - #address-cells = <1>; - #size-cells = <1>; - - /* parallel camera ports */ - parallel-ports { - /* camera A input */ - port@1 { - reg = <1>; - fimc0_ep: endpoint { - remote-endpoint = <&s5k6aa_ep>; - bus-width = <8>; - hsync-active = <0>; - vsync-active = <1>; - pclk-sample = <1>; - }; - }; - }; - - fimc_0: fimc@11800000 { - compatible = "samsung,exynos4210-fimc"; - reg = <0x11800000 0x1000>; - interrupts = <0 85 0>; - }; - - csis_0: csis@11880000 { - compatible = "samsung,exynos4210-csis"; - reg = <0x11880000 0x1000>; - interrupts = <0 78 0>; - /* camera C input */ - port@3 { - reg = <3>; - csis0_ep: endpoint { - remote-endpoint = <&s5c73m3_ep>; - data-lanes = <1 2 3 4>; - samsung,csis-hs-settle = <12>; - }; - }; - }; - }; - -The MIPI-CSIS device binding is defined in samsung-mipi-csis.txt. diff --git a/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt b/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt deleted file mode 100644 index a4149c9434ea..000000000000 --- a/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt +++ /dev/null @@ -1,81 +0,0 @@ -Samsung S5P/Exynos SoC series MIPI CSI-2 receiver (MIPI CSIS) -------------------------------------------------------------- - -Required properties: - -- compatible : "samsung,s5pv210-csis" for S5PV210 (S5PC110), - "samsung,exynos4210-csis" for Exynos4210 (S5PC210), - "samsung,exynos4212-csis" for Exynos4212/Exynos4412, - "samsung,exynos5250-csis" for Exynos5250; -- reg : offset and length of the register set for the device; -- interrupts : should contain MIPI CSIS interrupt; the format of the - interrupt specifier depends on the interrupt controller; -- bus-width : maximum number of data lanes supported (SoC specific); -- vddio-supply : MIPI CSIS I/O and PLL voltage supply (e.g. 1.8V); -- vddcore-supply : MIPI CSIS Core voltage supply (e.g. 1.1V); -- clocks : list of clock specifiers, corresponding to entries in - clock-names property; -- clock-names : must contain "csis", "sclk_csis" entries, matching entries - in the clocks property. - -Optional properties: - -- clock-frequency : The IP's main (system bus) clock frequency in Hz, default - value when this property is not specified is 166 MHz; -- samsung,csis-wclk : CSI-2 wrapper clock selection. If this property is present - external clock from CMU will be used, or the bus clock if - if it's not specified. - -The device node should contain one 'port' child node with one child 'endpoint' -node, according to the bindings defined in Documentation/devicetree/bindings/ -media/video-interfaces.txt. The following are properties specific to those nodes. - -port node ---------- - -- reg : (required) must be 3 for camera C input (CSIS0) or 4 for - camera D input (CSIS1); - -endpoint node -------------- - -- data-lanes : (required) an array specifying active physical MIPI-CSI2 - data input lanes and their mapping to logical lanes; the - array's content is unused, only its length is meaningful; - -- samsung,csis-hs-settle : (optional) differential receiver (HS-RX) settle time; - - -Example: - - reg0: regulator@0 { - }; - - reg1: regulator@1 { - }; - -/* SoC properties */ - - csis_0: csis@11880000 { - compatible = "samsung,exynos4210-csis"; - reg = <0x11880000 0x1000>; - interrupts = <0 78 0>; - #address-cells = <1>; - #size-cells = <0>; - }; - -/* Board properties */ - - csis_0: csis@11880000 { - clock-frequency = <166000000>; - vddio-supply = <®0>; - vddcore-supply = <®1>; - port { - reg = <3>; /* 3 - CSIS0, 4 - CSIS1 */ - csis0_ep: endpoint { - remote-endpoint = <...>; - data-lanes = <1>, <2>; - samsung,csis-hs-settle = <12>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt b/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt deleted file mode 100644 index f0ea9adad442..000000000000 --- a/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt +++ /dev/null @@ -1,97 +0,0 @@ -Samsung S5C73M3 8Mp camera ISP ------------------------------- - -The S5C73M3 camera ISP supports MIPI CSI-2 and parallel (ITU-R BT.656) video -data busses. The I2C bus is the main control bus and additionally the SPI bus -is used, mostly for transferring the firmware to and from the device. Two -slave device nodes corresponding to these control bus interfaces are required -and should be placed under respective bus controller nodes. - -I2C slave device node ---------------------- - -Required properties: - -- compatible : "samsung,s5c73m3"; -- reg : I2C slave address of the sensor; -- vdd-int-supply : digital power supply (1.2V); -- vdda-supply : analog power supply (1.2V); -- vdd-reg-supply : regulator input power supply (2.8V); -- vddio-host-supply : host I/O power supply (1.8V to 2.8V); -- vddio-cis-supply : CIS I/O power supply (1.2V to 1.8V); -- vdd-af-supply : lens power supply (2.8V); -- xshutdown-gpios : specifier of GPIO connected to the XSHUTDOWN pin; -- standby-gpios : specifier of GPIO connected to the STANDBY pin; -- clocks : should contain list of phandle and clock specifier pairs - according to common clock bindings for the clocks described - in the clock-names property; -- clock-names : should contain "cis_extclk" entry for the CIS_EXTCLK clock; - -Optional properties: - -- clock-frequency : the frequency at which the "cis_extclk" clock should be - configured to operate, in Hz; if this property is not - specified default 24 MHz value will be used. - -The common video interfaces bindings (see video-interfaces.txt) should be used -to specify link from the S5C73M3 to an external image data receiver. The S5C73M3 -device node should contain one 'port' child node with an 'endpoint' subnode for -this purpose. The data link from a raw image sensor to the S5C73M3 can be -similarly specified, but it is optional since the S5C73M3 ISP and a raw image -sensor are usually inseparable and form a hybrid module. - -Following properties are valid for the endpoint node(s): - -endpoint subnode ----------------- - -- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in - video-interfaces.txt. This sensor doesn't support data lane remapping - and physical lane indexes in subsequent elements of the array should - be only consecutive ascending values. - -SPI device node ---------------- - -Required properties: - -- compatible : "samsung,s5c73m3"; - -For more details see description of the SPI busses bindings -(../spi/spi-bus.txt) and bindings of a specific bus controller. - -Example: - -i2c@138a000000 { - ... - s5c73m3@3c { - compatible = "samsung,s5c73m3"; - reg = <0x3c>; - vdd-int-supply = <&buck9_reg>; - vdda-supply = <&ldo17_reg>; - vdd-reg-supply = <&cam_io_reg>; - vddio-host-supply = <&ldo18_reg>; - vddio-cis-supply = <&ldo9_reg>; - vdd-af-supply = <&cam_af_reg>; - clock-frequency = <24000000>; - clocks = <&clk 0>; - clock-names = "cis_extclk"; - xshutdown-gpios = <&gpf1 3 1>; - standby-gpios = <&gpm0 1 1>; - port { - s5c73m3_ep: endpoint { - remote-endpoint = <&csis0_ep>; - data-lanes = <1 2 3 4>; - }; - }; - }; -}; - -spi@1392000 { - ... - s5c73m3_spi: s5c73m3@0 { - compatible = "samsung,s5c73m3"; - reg = <0>; - ... - }; -}; diff --git a/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt b/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt deleted file mode 100644 index 1f51e0439c96..000000000000 --- a/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt +++ /dev/null @@ -1,58 +0,0 @@ -Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor with embedded SoC ISP --------------------------------------------------------------------- - -Required properties: - -- compatible : "samsung,s5k5baf"; -- reg : I2C slave address of the sensor; -- vdda-supply : analog power supply 2.8V (2.6V to 3.0V); -- vddreg-supply : regulator input power supply 1.8V (1.7V to 1.9V) - or 2.8V (2.6V to 3.0); -- vddio-supply : I/O power supply 1.8V (1.65V to 1.95V) - or 2.8V (2.5V to 3.1V); -- stbyn-gpios : GPIO connected to STDBYN pin; -- rstn-gpios : GPIO connected to RSTN pin; -- clocks : list of phandle and clock specifier pairs - according to common clock bindings for the - clocks described in clock-names; -- clock-names : should include "mclk" for the sensor's master clock; - -Optional properties: - -- clock-frequency : the frequency at which the "mclk" clock should be - configured to operate, in Hz; if this property is not - specified default 24 MHz value will be used. - -The device node should contain one 'port' child node with one child 'endpoint' -node, according to the bindings defined in Documentation/devicetree/bindings/ -media/video-interfaces.txt. The following are properties specific to those -nodes. - -endpoint node -------------- - -- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in - video-interfaces.txt. If present it should be <1> - the device - supports only one data lane without re-mapping. - -Example: - -s5k5bafx@2d { - compatible = "samsung,s5k5baf"; - reg = <0x2d>; - vdda-supply = <&cam_io_en_reg>; - vddreg-supply = <&vt_core_15v_reg>; - vddio-supply = <&vtcam_reg>; - stbyn-gpios = <&gpl2 0 1>; - rstn-gpios = <&gpl2 1 1>; - clock-names = "mclk"; - clocks = <&clock_cam 0>; - clock-frequency = <24000000>; - - port { - s5k5bafx_ep: endpoint { - remote-endpoint = <&csis1_ep>; - data-lanes = <1>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt b/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt deleted file mode 100644 index cce01e82f3e3..000000000000 --- a/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt +++ /dev/null @@ -1,33 +0,0 @@ -Samsung S5K6A3(YX) raw image sensor ---------------------------------- - -S5K6A3(YX) is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces -and CCI (I2C compatible) control bus. - -Required properties: - -- compatible : "samsung,s5k6a3"; -- reg : I2C slave address of the sensor; -- svdda-supply : core voltage supply; -- svddio-supply : I/O voltage supply; -- afvdd-supply : AF (actuator) voltage supply; -- gpios : specifier of a GPIO connected to the RESET pin; -- clocks : should contain list of phandle and clock specifier pairs - according to common clock bindings for the clocks described - in the clock-names property; -- clock-names : should contain "extclk" entry for the sensor's EXTCLK clock; - -Optional properties: - -- clock-frequency : the frequency at which the "extclk" clock should be - configured to operate, in Hz; if this property is not - specified default 24 MHz value will be used. - -The common video interfaces bindings (see video-interfaces.txt) should be -used to specify link to the image data receiver. The S5K6A3(YX) device -node should contain one 'port' child node with an 'endpoint' subnode. - -Following properties are valid for the endpoint node: - -- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in - video-interfaces.txt. The sensor supports only one data lane. diff --git a/Documentation/devicetree/bindings/media/si470x.txt b/Documentation/devicetree/bindings/media/si470x.txt deleted file mode 100644 index a9403558362e..000000000000 --- a/Documentation/devicetree/bindings/media/si470x.txt +++ /dev/null @@ -1,26 +0,0 @@ -* Silicon Labs FM Radio receiver - -The Silicon Labs Si470x is family of FM radio receivers with receive power scan -supporting 76-108 MHz, programmable through an I2C interface. -Some of them includes an RDS encoder. - -Required Properties: -- compatible: Should contain "silabs,si470x" -- reg: the I2C address of the device - -Optional Properties: -- interrupts : The interrupt number -- reset-gpios: GPIO specifier for the chips reset line - -Example: - -&i2c2 { - si470x@63 { - compatible = "silabs,si470x"; - reg = <0x63>; - - interrupt-parent = <&gpj2>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&gpj2 5 GPIO_ACTIVE_HIGH>; - }; -}; diff --git a/Documentation/devicetree/bindings/media/silabs,si470x.yaml b/Documentation/devicetree/bindings/media/silabs,si470x.yaml new file mode 100644 index 000000000000..a3d19c562ca3 --- /dev/null +++ b/Documentation/devicetree/bindings/media/silabs,si470x.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/silabs,si470x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Silicon Labs Si470x FM Radio Receiver + +maintainers: + - Hans Verkuil <hverkuil@xs4all.nl> + - PaweÅ‚ Chmiel <pawel.mikolaj.chmiel@gmail.com> + +properties: + compatible: + const: silabs,si470x + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + fmradio@10 { + compatible = "silabs,si470x"; + reg = <0x10>; + interrupt-parent = <&gpj2>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpj2 5 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/media/st,stm32-cec.yaml b/Documentation/devicetree/bindings/media/st,stm32-cec.yaml deleted file mode 100644 index 7f545a587a39..000000000000 --- a/Documentation/devicetree/bindings/media/st,stm32-cec.yaml +++ /dev/null @@ -1,53 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/media/st,stm32-cec.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: STMicroelectronics STM32 CEC - -maintainers: - - Yannick Fertre <yannick.fertre@foss.st.com> - -properties: - compatible: - const: st,stm32-cec - - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - - clocks: - items: - - description: Module Clock - - description: Bus Clock - - clock-names: - items: - - const: cec - - const: hdmi-cec - -required: - - compatible - - reg - - interrupts - - clocks - - clock-names - -additionalProperties: false - -examples: - - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/clock/stm32mp1-clks.h> - cec: cec@40006c00 { - compatible = "st,stm32-cec"; - reg = <0x40006c00 0x400>; - interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc CEC_K>, <&clk_lse>; - clock-names = "cec", "hdmi-cec"; - }; - -... diff --git a/Documentation/devicetree/bindings/media/ti,cal.yaml b/Documentation/devicetree/bindings/media/ti,cal.yaml index f8e4d260d10a..478bdbe3d759 100644 --- a/Documentation/devicetree/bindings/media/ti,cal.yaml +++ b/Documentation/devicetree/bindings/media/ti,cal.yaml @@ -47,7 +47,7 @@ properties: maxItems: 1 ti,camerrx-control: - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: - description: phandle to device control module |