Merge tag 'spi-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "This has been a fairly quiet release for SPI, though it is likely that
  the next release will have some big changes as there's some
  preparatory work for multiple chip select support gone in - the rest
  of the code is on the list but will need to be rebased onto -rc1.
  Otherwise there's a couple of new tunables for chip select timings,
  some new devices and smaller device specific updates and fixes.

   - Support for configuring the hold and minimum inactive times for
     chip selects.

   - Beginnings of support for supporting devices which have multiple
     chip selects on a single device.

   - Support for newer Broadcom HSSPI and Intel controllers, Silicon
     Labs EM3581 and SI3210"

* tag 'spi-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (67 commits)
  spi: dt-bindings: qcom,spi-qcom-qspi: document OPP and power-domains
  spi: spidev: drop the incorrect notice from Kconfig
  spi: bcm63xx-hsspi: fix error code in probe
  spi: bcmbca-hsspi: Fix error code in probe() function
  spi: synquacer: Fix timeout handling in synquacer_spi_transfer_one()
  spi: intel: Check number of chip selects after reading the descriptor
  spi: xilinx: add force_irq for QSPI mode
  spi: spi-st-ssc: convert to DT schema
  spi: Reorder fields in 'struct spi_transfer'
  spi: cadence-quadspi: use STIG mode for small reads
  spi: cadence-quadspi: setup ADDR Bits in cmd reads
  spi: cadence-quadspi: Add flag for direct mode writes
  spi: cadence-quadspi: Reset CMD_CTRL Reg on cmd r/w completion
  MAINTAINERS: Remove file reference for Broadcom Broadband SoC HS SPI driver entry
  spi: bcm63xx-hsspi: bcmbca-hsspi: fix _be16 type usage
  MAINTAINERS: Add entry for Broadcom Broadband SoC HS SPI drivers
  spi: bcmbca-hsspi: Add driver for newer HSSPI controller
  spi: bcm63xx-hsspi: Disable spi mem dual io read op support
  spi: spi-mem: Allow controller supporting mem_ops without exec_op
  spi: bcm63xx-hsspi: Add prepend mode support
  ...

42 files changed, 498 insertions, 315 deletions

diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml
index f1176a28fd87..eb0567b2971a 100644
--- a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Allwinner A10 SPI Controller
 
 allOf:
-  - $ref: "spi-controller.yaml"
+  - $ref: spi-controller.yaml
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
index 58b7056f4a70..acf218507d22 100644
--- a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Allwinner A31 SPI Controller
 
 allOf:
-  - $ref: "spi-controller.yaml"
+  - $ref: spi-controller.yaml
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
index 53eb6562b979..4e28e6e9d8e0 100644
--- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
+++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
@@ -2,8 +2,8 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/spi/amlogic,meson-gx-spicc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/spi/amlogic,meson-gx-spicc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic Meson SPI Communication Controller
 
@@ -41,7 +41,7 @@ properties:
     maxItems: 2
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
   - if:
       properties:
         compatible:
@@ -100,17 +100,17 @@ unevaluatedProperties: false
 examples:
   - |
     spi@c1108d80 {
-          compatible = "amlogic,meson-gx-spicc";
-          reg = <0xc1108d80 0x80>;
-          interrupts = <112>;
-          clocks = <&clk81>;
-          clock-names = "core";
-          #address-cells = <1>;
-          #size-cells = <0>;
-
-          display@0 {
-              compatible = "lg,lg4573";
-              spi-max-frequency = <1000000>;
-              reg = <0>;
-          };
+        compatible = "amlogic,meson-gx-spicc";
+        reg = <0xc1108d80 0x80>;
+        interrupts = <112>;
+        clocks = <&clk81>;
+        clock-names = "core";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display@0 {
+            compatible = "lg,lg4573";
+            spi-max-frequency = <1000000>;
+            reg = <0>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
index ac3b2ec300ac..8e769ccda97f 100644
--- a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
+++ b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
@@ -2,8 +2,8 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/spi/amlogic,meson6-spifc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/spi/amlogic,meson6-spifc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic Meson SPI Flash Controller
 
@@ -11,7 +11,7 @@ maintainers:
   - Neil Armstrong <neil.armstrong@linaro.org>
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 description: |
   The Meson SPIFC is a controller optimized for communication with SPI
@@ -40,15 +40,15 @@ unevaluatedProperties: false
 examples:
   - |
     spi@c1108c80 {
-          compatible = "amlogic,meson6-spifc";
-          reg = <0xc1108c80 0x80>;
-          clocks = <&clk81>;
-          #address-cells = <1>;
-          #size-cells = <0>;
-
-          flash: flash@0 {
-              compatible = "spansion,m25p80", "jedec,spi-nor";
-              reg = <0>;
-              spi-max-frequency = <40000000>;
-          };
+        compatible = "amlogic,meson6-spifc";
+        reg = <0xc1108c80 0x80>;
+        clocks = <&clk81>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash: flash@0 {
+            compatible = "spansion,m25p80", "jedec,spi-nor";
+            reg = <0>;
+            spi-max-frequency = <40000000>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml
index e6c817de3449..57d932af4506 100644
--- a/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml
+++ b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml
@@ -15,7 +15,7 @@ description: |
   SPI) of the AST2400, AST2500 and AST2600 SOCs.
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 properties:
   compatible:
@@ -60,23 +60,23 @@ examples:
         interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 
         flash@0 {
-                reg = < 0 >;
-                compatible = "jedec,spi-nor";
-                spi-max-frequency = <50000000>;
-                spi-rx-bus-width = <2>;
+            reg = < 0 >;
+            compatible = "jedec,spi-nor";
+            spi-max-frequency = <50000000>;
+            spi-rx-bus-width = <2>;
         };
 
         flash@1 {
-                reg = < 1 >;
-                compatible = "jedec,spi-nor";
-                spi-max-frequency = <50000000>;
-                spi-rx-bus-width = <2>;
+            reg = < 1 >;
+            compatible = "jedec,spi-nor";
+            spi-max-frequency = <50000000>;
+            spi-rx-bus-width = <2>;
         };
 
         flash@2 {
-                reg = < 2 >;
-                compatible = "jedec,spi-nor";
-                spi-max-frequency = <50000000>;
-                spi-rx-bus-width = <2>;
+            reg = < 2 >;
+            compatible = "jedec,spi-nor";
+            spi-max-frequency = <50000000>;
+            spi-rx-bus-width = <2>;
         };
     };
diff --git a/Documentation/devicetree/bindings/spi/brcm,bcm63xx-hsspi.yaml b/Documentation/devicetree/bindings/spi/brcm,bcm63xx-hsspi.yaml
new file mode 100644
index 000000000000..6554978583f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/brcm,bcm63xx-hsspi.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/brcm,bcm63xx-hsspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Broadband SoC High Speed SPI controller
+
+maintainers:
+  - William Zhang <william.zhang@broadcom.com>
+  - Kursad Oney <kursad.oney@broadcom.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description: |
+  Broadcom Broadband SoC supports High Speed SPI master controller since the
+  early MIPS based chips such as BCM6328 and BCM63268.  This initial rev 1.0
+  controller was carried over to recent ARM based chips, such as BCM63138,
+  BCM4908 and BCM6858. The old MIPS based chip should continue to use the
+  brcm,bcm6328-hsspi compatible string. The recent ARM based chip is required to
+  use the brcm,bcmbca-hsspi-v1.0 as part of its compatible string list as
+  defined below to match the specific chip along with ip revision info.
+
+  This rev 1.0 controller has a limitation that can not keep the chip select line
+  active between the SPI transfers within the same SPI message. This can
+  terminate the transaction to some SPI devices prematurely. The issue can be
+  worked around by either the controller's prepend mode or using the dummy chip
+  select workaround. Driver automatically picks the suitable mode based on
+  transfer type so it is transparent to the user.
+
+  The newer SoCs such as BCM6756, BCM4912 and BCM6855 include an updated SPI
+  controller rev 1.1 that add the capability to allow the driver to control chip
+  select explicitly. This solves the issue in the old controller.
+
+properties:
+  compatible:
+    oneOf:
+      - const: brcm,bcm6328-hsspi
+      - items:
+          - enum:
+              - brcm,bcm47622-hsspi
+              - brcm,bcm4908-hsspi
+              - brcm,bcm63138-hsspi
+              - brcm,bcm63146-hsspi
+              - brcm,bcm63148-hsspi
+              - brcm,bcm63158-hsspi
+              - brcm,bcm63178-hsspi
+              - brcm,bcm6846-hsspi
+              - brcm,bcm6856-hsspi
+              - brcm,bcm6858-hsspi
+              - brcm,bcm6878-hsspi
+          - const: brcm,bcmbca-hsspi-v1.0
+      - items:
+          - enum:
+              - brcm,bcm4912-hsspi
+              - brcm,bcm6756-hsspi
+              - brcm,bcm6813-hsspi
+              - brcm,bcm6855-hsspi
+          - const: brcm,bcmbca-hsspi-v1.1
+
+  reg:
+    items:
+      - description: main registers
+      - description: miscellaneous control registers
+    minItems: 1
+
+  reg-names:
+    items:
+      - const: hsspi
+      - const: spim-ctrl
+    minItems: 1
+
+  clocks:
+    items:
+      - description: SPI master reference clock
+      - description: SPI master pll clock
+
+  clock-names:
+    items:
+      - const: hsspi
+      - const: pll
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+allOf:
+  - $ref: spi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm6328-hsspi
+              - brcm,bcmbca-hsspi-v1.0
+    then:
+      properties:
+        reg:
+          maxItems: 1
+        reg-names:
+          maxItems: 1
+    else:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 2
+        reg-names:
+          minItems: 2
+          maxItems: 2
+      required:
+        - reg-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    spi@ff801000 {
+        compatible = "brcm,bcm6756-hsspi", "brcm,bcmbca-hsspi-v1.1";
+        reg = <0xff801000 0x1000>,
+              <0xff802610 0x4>;
+        reg-names = "hsspi", "spim-ctrl";
+        interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&hsspi>, <&hsspi_pll>;
+        clock-names = "hsspi", "pll";
+        num-cs = <8>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml
index ec5873919170..28222aae3077 100644
--- a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml
@@ -99,98 +99,98 @@ required:
 examples:
   - | # BRCMSTB SoC: SPI Master (MSPI+BSPI) for SPI-NOR access
     spi@f03e3400 {
-            compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi";
-            reg = <0xf03e3400 0x188>, <0xf03e3200 0x50>, <0xf03e0920 0x4>;
-            reg-names = "mspi", "bspi", "cs_reg";
-            interrupts = <0x5>, <0x6>, <0x1>, <0x2>, <0x3>, <0x4>, <0x0>;
-            interrupt-parent = <&gic>;
-            interrupt-names = "mspi_done",
-                              "mspi_halted",
-                              "spi_lr_fullness_reached",
-                              "spi_lr_session_aborted",
-                              "spi_lr_impatient",
-                              "spi_lr_session_done",
-                              "spi_lr_overread";
-            clocks = <&hif_spi>;
-            #address-cells = <0x1>;
-            #size-cells = <0x0>;
-
-            flash@0 {
-                    #size-cells = <0x2>;
-                    #address-cells = <0x2>;
-                    compatible = "m25p80";
-                    reg = <0x0>;
-                    spi-max-frequency = <0x2625a00>;
-                    spi-cpol;
-                    spi-cpha;
-            };
+        compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi";
+        reg = <0xf03e3400 0x188>, <0xf03e3200 0x50>, <0xf03e0920 0x4>;
+        reg-names = "mspi", "bspi", "cs_reg";
+        interrupts = <0x5>, <0x6>, <0x1>, <0x2>, <0x3>, <0x4>, <0x0>;
+        interrupt-parent = <&gic>;
+        interrupt-names = "mspi_done",
+                          "mspi_halted",
+                          "spi_lr_fullness_reached",
+                          "spi_lr_session_aborted",
+                          "spi_lr_impatient",
+                          "spi_lr_session_done",
+                          "spi_lr_overread";
+        clocks = <&hif_spi>;
+        #address-cells = <0x1>;
+        #size-cells = <0x0>;
+
+        flash@0 {
+            #size-cells = <0x2>;
+            #address-cells = <0x2>;
+            compatible = "m25p80";
+            reg = <0x0>;
+            spi-max-frequency = <0x2625a00>;
+            spi-cpol;
+            spi-cpha;
+        };
     };
   - | # BRCMSTB SoC: MSPI master for any SPI device
     spi@f0416000 {
-            clocks = <&upg_fixed>;
-            compatible = "brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi";
-            reg = <0xf0416000 0x180>;
-            reg-names = "mspi";
-            interrupts = <0x14>;
-            interrupt-parent = <&irq0_aon_intc>;
-            interrupt-names = "mspi_done";
-            #address-cells = <1>;
-            #size-cells = <0>;
+        clocks = <&upg_fixed>;
+        compatible = "brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi";
+        reg = <0xf0416000 0x180>;
+        reg-names = "mspi";
+        interrupts = <0x14>;
+        interrupt-parent = <&irq0_aon_intc>;
+        interrupt-names = "mspi_done";
+        #address-cells = <1>;
+        #size-cells = <0>;
     };
   - | # iProc SoC
     #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     spi@18027200 {
-            compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
-            reg = <0x18027200 0x184>,
-                  <0x18027000 0x124>,
-                  <0x1811c408 0x004>,
-                  <0x180273a0 0x01c>;
-            reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
-            interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-            interrupt-names = "mspi_done",
-                              "mspi_halted",
-                              "spi_lr_fullness_reached",
-                              "spi_lr_session_aborted",
-                              "spi_lr_impatient",
-                              "spi_lr_session_done";
-            clocks = <&iprocmed>;
-            num-cs = <2>;
-            #address-cells = <1>;
-            #size-cells = <0>;
+        compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
+        reg = <0x18027200 0x184>,
+              <0x18027000 0x124>,
+              <0x1811c408 0x004>,
+              <0x180273a0 0x01c>;
+        reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
+        interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "mspi_done",
+                          "mspi_halted",
+                          "spi_lr_fullness_reached",
+                          "spi_lr_session_aborted",
+                          "spi_lr_impatient",
+                          "spi_lr_session_done";
+        clocks = <&iprocmed>;
+        num-cs = <2>;
+        #address-cells = <1>;
+        #size-cells = <0>;
     };
   - | # NS2 SoC
     #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     spi@66470200 {
-            compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi";
-            reg = <0x66470200 0x184>,
-                  <0x66470000 0x124>,
-                  <0x67017408 0x004>,
-                  <0x664703a0 0x01c>;
-            reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
-            interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
-            interrupt-names = "spi_l1_intr";
-            clocks = <&iprocmed>;
-            num-cs = <2>;
+        compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi";
+        reg = <0x66470200 0x184>,
+              <0x66470000 0x124>,
+              <0x67017408 0x004>,
+              <0x664703a0 0x01c>;
+        reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
+        interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "spi_l1_intr";
+        clocks = <&iprocmed>;
+        num-cs = <2>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
             #address-cells = <1>;
-            #size-cells = <0>;
-
-            flash@0 {
-                    #address-cells = <1>;
-                    #size-cells = <1>;
-                    compatible = "m25p80";
-                    reg = <0x0>;
-                    spi-max-frequency = <12500000>;
-                    spi-cpol;
-                    spi-cpha;
-            };
+            #size-cells = <1>;
+            compatible = "m25p80";
+            reg = <0x0>;
+            spi-max-frequency = <12500000>;
+            spi-cpol;
+            spi-cpha;
+        };
     };
diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
index 4707294d8f59..5c01db128be0 100644
--- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
+++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
@@ -47,7 +47,7 @@ properties:
   cdns,fifo-depth:
     description:
       Size of the data FIFO in words.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [ 128, 256 ]
     default: 128
 
@@ -103,21 +103,21 @@ unevaluatedProperties: false
 examples:
   - |
     qspi: spi@ff705000 {
-      compatible = "cdns,qspi-nor";
-      #address-cells = <1>;
-      #size-cells = <0>;
-      reg = <0xff705000 0x1000>,
-            <0xffa00000 0x1000>;
-      interrupts = <0 151 4>;
-      clocks = <&qspi_clk>;
-      cdns,fifo-depth = <128>;
-      cdns,fifo-width = <4>;
-      cdns,trigger-address = <0x00000000>;
-      resets = <&rst 0x1>, <&rst 0x2>;
-      reset-names = "qspi", "qspi-ocp";
-
-      flash@0 {
-              compatible = "jedec,spi-nor";
-              reg = <0x0>;
-      };
+        compatible = "cdns,qspi-nor";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0xff705000 0x1000>,
+              <0xffa00000 0x1000>;
+        interrupts = <0 151 4>;
+        clocks = <&qspi_clk>;
+        cdns,fifo-depth = <128>;
+        cdns,fifo-width = <4>;
+        cdns,trigger-address = <0x00000000>;
+        resets = <&rst 0x1>, <&rst 0x2>;
+        reset-names = "qspi", "qspi-ocp";
+
+        flash@0 {
+            compatible = "jedec,spi-nor";
+            reg = <0x0>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/spi/cdns,xspi.yaml b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml
index b8bb8a3dbf54..eb0f92468185 100644
--- a/Documentation/devicetree/bindings/spi/cdns,xspi.yaml
+++ b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml
@@ -2,8 +2,8 @@
 # Copyright 2020-21 Cadence
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/spi/cdns,xspi.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/spi/cdns,xspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Cadence XSPI Controller
 
@@ -16,7 +16,7 @@ description: |
   read/write access to slaves such as SPI-NOR flash.
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/spi/fsl,spi-fsl-qspi.yaml b/Documentation/devicetree/bindings/spi/fsl,spi-fsl-qspi.yaml
index e58644558412..f2dd20370dbb 100644
--- a/Documentation/devicetree/bindings/spi/fsl,spi-fsl-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/fsl,spi-fsl-qspi.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Han Xu <han.xu@nxp.com>
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
index 12cb76711000..2f593c7225e5 100644
--- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
+++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Shawn Guo <shawnguo@kernel.org>
 
 allOf:
-  - $ref: "/schemas/spi/spi-controller.yaml#"
+  - $ref: /schemas/spi/spi-controller.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml
index 8d2a6c084eab..b6249880c3f9 100644
--- a/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml
+++ b/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Leilk Liu <leilk.liu@mediatek.com>
 
 allOf:
-  - $ref: "/schemas/spi/spi-controller.yaml#"
+  - $ref: /schemas/spi/spi-controller.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml
index 6e6e02c91780..1e5e89a693c3 100644
--- a/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml
+++ b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml
@@ -18,14 +18,12 @@ description: |
   using the accompanying ECC engine. There should be only one spi
   slave device following generic spi bindings.
 
-allOf:
-  - $ref: /schemas/spi/spi-controller.yaml#
-
 properties:
   compatible:
     enum:
       - mediatek,mt7622-snand
       - mediatek,mt7629-snand
+      - mediatek,mt7986-snand
 
   reg:
     items:
@@ -36,19 +34,20 @@ properties:
       - description: NFI interrupt
 
   clocks:
-    items:
-      - description: clock used for the controller
-      - description: clock used for the SPI bus
+    minItems: 2
+    maxItems: 3
 
   clock-names:
-    items:
-      - const: nfi_clk
-      - const: pad_clk
+    minItems: 2
+    maxItems: 3
 
   nand-ecc-engine:
     description: device-tree node of the accompanying ECC engine.
     $ref: /schemas/types.yaml#/definitions/phandle
 
+  mediatek,rx-latch-latency-ns:
+    description: Data read latch latency, unit is nanoseconds.
+
 required:
   - compatible
   - reg
@@ -57,6 +56,43 @@ required:
   - clock-names
   - nand-ecc-engine
 
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt7622-snand
+            - mediatek,mt7629-snand
+    then:
+      properties:
+        clocks:
+          items:
+            - description: clock used for the controller
+            - description: clock used for the SPI bus
+        clock-names:
+          items:
+            - const: nfi_clk
+            - const: pad_clk
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt7986-snand
+    then:
+      properties:
+        clocks:
+          items:
+            - description: clock used for the controller
+            - description: clock used for the SPI bus
+            - description: clock used for the AHB bus
+        clock-names:
+          items:
+            - const: nfi_clk
+            - const: pad_clk
+            - const: nfi_hclk
+
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-slave-mt27xx.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-slave-mt27xx.yaml
index 7977799a8ee1..d19c9f73978f 100644
--- a/Documentation/devicetree/bindings/spi/mediatek,spi-slave-mt27xx.yaml
+++ b/Documentation/devicetree/bindings/spi/mediatek,spi-slave-mt27xx.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Leilk Liu <leilk.liu@mediatek.com>
 
 allOf:
-  - $ref: "/schemas/spi/spi-controller.yaml#"
+  - $ref: /schemas/spi/spi-controller.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml b/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml
index 3fd0a8adfe9a..303f6dca89c0 100644
--- a/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml
@@ -11,7 +11,7 @@ maintainers:
   - Bert Vermeulen <bert@biot.com>
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/spi/mxicy,mx25f0a-spi.yaml b/Documentation/devicetree/bindings/spi/mxicy,mx25f0a-spi.yaml
index a3aa5e07c0e4..221fe6e2ef53 100644
--- a/Documentation/devicetree/bindings/spi/mxicy,mx25f0a-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/mxicy,mx25f0a-spi.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Miquel Raynal <miquel.raynal@bootlin.com>
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/spi/mxs-spi.yaml b/Documentation/devicetree/bindings/spi/mxs-spi.yaml
index 51f8c664323e..e2512166c1cd 100644
--- a/Documentation/devicetree/bindings/spi/mxs-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/mxs-spi.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Marek Vasut <marex@denx.de>
 
 allOf:
-  - $ref: "/schemas/spi/spi-controller.yaml#"
+  - $ref: /schemas/spi/spi-controller.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
index 899100e783c9..9ae1611175f2 100644
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
@@ -11,7 +11,7 @@ maintainers:
   - Jonathan Hunter <jonathanh@nvidia.com>
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 properties:
   compatible:
@@ -74,25 +74,25 @@ examples:
     #include <dt-bindings/reset/tegra210-car.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     spi@70410000 {
-            compatible = "nvidia,tegra210-qspi";
-            reg = <0x70410000 0x1000>;
-            interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-            #address-cells = <1>;
-            #size-cells = <0>;
-            clocks = <&tegra_car TEGRA210_CLK_QSPI>,
-                     <&tegra_car TEGRA210_CLK_QSPI_PM>;
-            clock-names = "qspi", "qspi_out";
-            resets = <&tegra_car 211>;
-            dmas = <&apbdma 5>, <&apbdma 5>;
-            dma-names = "rx", "tx";
-
-            flash@0 {
-                    compatible = "jedec,spi-nor";
-                    reg = <0>;
-                    spi-max-frequency = <104000000>;
-                    spi-tx-bus-width = <2>;
-                    spi-rx-bus-width = <2>;
-                    nvidia,tx-clk-tap-delay = <0>;
-                    nvidia,rx-clk-tap-delay = <0>;
-            };
+        compatible = "nvidia,tegra210-qspi";
+        reg = <0x70410000 0x1000>;
+        interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&tegra_car TEGRA210_CLK_QSPI>,
+                 <&tegra_car TEGRA210_CLK_QSPI_PM>;
+        clock-names = "qspi", "qspi_out";
+        resets = <&tegra_car 211>;
+        dmas = <&apbdma 5>, <&apbdma 5>;
+        dma-names = "rx", "tx";
+
+        flash@0 {
+            compatible = "jedec,spi-nor";
+            reg = <0>;
+            spi-max-frequency = <104000000>;
+            spi-tx-bus-width = <2>;
+            spi-rx-bus-width = <2>;
+            nvidia,tx-clk-tap-delay = <0>;
+            nvidia,rx-clk-tap-delay = <0>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
index b622bb7363ec..ee8f7ea907b0 100644
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
@@ -1,9 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/spi/qcom,spi-qcom-qspi.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/spi/qcom,spi-qcom-qspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm Quad Serial Peripheral Interface (QSPI)
 
@@ -53,6 +52,11 @@ properties:
       - const: qspi-config
       - const: qspi-memory
 
+  operating-points-v2: true
+
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -88,7 +92,6 @@ examples:
                 spi-tx-bus-width = <2>;
                 spi-rx-bus-width = <2>;
             };
-
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/spi/realtek,rtl-spi.yaml b/Documentation/devicetree/bindings/spi/realtek,rtl-spi.yaml
index 2f938c293f70..70330d945a70 100644
--- a/Documentation/devicetree/bindings/spi/realtek,rtl-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/realtek,rtl-spi.yaml
@@ -11,7 +11,7 @@ maintainers:
   - Birger Koblitz <mail@birger-koblitz.de>
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/spi/renesas,rspi.yaml b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml
index f45d3b75d6de..4d8ec69214c9 100644
--- a/Documentation/devicetree/bindings/spi/renesas,rspi.yaml
+++ b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml
@@ -141,15 +141,15 @@ examples:
     #include <dt-bindings/power/r8a7791-sysc.h>
 
     qspi: spi@e6b10000 {
-            compatible = "renesas,qspi-r8a7791", "renesas,qspi";
-            reg = <0xe6b10000 0x2c>;
-            interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&cpg CPG_MOD 917>;
-            dmas = <&dmac0 0x17>, <&dmac0 0x18>, <&dmac1 0x17>, <&dmac1 0x18>;
-            dma-names = "tx", "rx", "tx", "rx";
-            power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-            resets = <&cpg 917>;
-            num-cs = <1>;
-            #address-cells = <1>;
-            #size-cells = <0>;
+        compatible = "renesas,qspi-r8a7791", "renesas,qspi";
+        reg = <0xe6b10000 0x2c>;
+        interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 917>;
+        dmas = <&dmac0 0x17>, <&dmac0 0x18>, <&dmac1 0x17>, <&dmac1 0x18>;
+        dma-names = "tx", "rx", "tx", "rx";
+        power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+        resets = <&cpg 917>;
+        num-cs = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
     };
diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
index d33b72fabc5d..a132b5fc56e0 100644
--- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
+++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Mark Brown <broonie@kernel.org>
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
   - if:
       properties:
         compatible:
diff --git a/Documentation/devicetree/bindings/spi/spi-bcm63xx-hsspi.txt b/Documentation/devicetree/bindings/spi/spi-bcm63xx-hsspi.txt
deleted file mode 100644
index 37b29ee13860..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-bcm63xx-hsspi.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Binding for Broadcom BCM6328 High Speed SPI controller
-
-Required properties:
-- compatible: must contain of "brcm,bcm6328-hsspi".
-- reg: Base address and size of the controllers memory area.
-- interrupts: Interrupt for the SPI block.
-- clocks: phandles of the SPI clock and the PLL clock.
-- clock-names: must be "hsspi", "pll".
-- #address-cells: <1>, as required by generic SPI binding.
-- #size-cells: <0>, also as required by generic SPI binding.
-
-Optional properties:
-- num-cs: some controllers have less than 8 cs signals. Defaults to 8
-  if absent.
-
-Child nodes as per the generic SPI binding.
-
-Example:
-
-	spi@10001000 {
-		compatible = "brcm,bcm6328-hsspi";
-		reg = <0x10001000 0x600>;
-
-		interrupts = <29>;
-
-		clocks = <&clkctl 9>, <&hsspi_pll>;
-		clock-names = "hsspi", "pll";
-
-		num-cs = <2>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.yaml b/Documentation/devicetree/bindings/spi/spi-cadence.yaml
index 64bf4e621142..b0f83b5c2cdd 100644
--- a/Documentation/devicetree/bindings/spi/spi-cadence.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-cadence.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Michal Simek <michal.simek@xilinx.com>
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml
index 94caa2b7e241..e91425012319 100644
--- a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Anson Huang <Anson.Huang@nxp.com>
 
 allOf:
-  - $ref: "/schemas/spi/spi-controller.yaml#"
+  - $ref: /schemas/spi/spi-controller.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/spi/spi-gpio.yaml b/Documentation/devicetree/bindings/spi/spi-gpio.yaml
index f29b89076c99..9ce1df93d4c3 100644
--- a/Documentation/devicetree/bindings/spi/spi-gpio.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-gpio.yaml
@@ -14,7 +14,7 @@ description:
   dedicated GPIO lines.
 
 allOf:
-  - $ref: "/schemas/spi/spi-controller.yaml#"
+  - $ref: /schemas/spi/spi-controller.yaml#
 
 properties:
   compatible:
@@ -41,7 +41,7 @@ properties:
   num-chipselects:
     description: Number of chipselect lines. Should be <0> if a single device
       with no chip select is connected.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   # Deprecated properties
   gpio-sck: false
diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml
index 7ea79f6d33f3..fb2a6039928c 100644
--- a/Documentation/devicetree/bindings/spi/spi-mux.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml
@@ -30,8 +30,8 @@ description: |
       +------------+
 
 allOf:
-  - $ref: "/schemas/spi/spi-controller.yaml#"
-  - $ref: "/schemas/spi/spi-peripheral-props.yaml#"
+  - $ref: /schemas/spi/spi-controller.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 maintainers:
   - Chris Packham <chris.packham@alliedtelesis.co.nz>
diff --git a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml
index 1b552c298277..a813c971ecf6 100644
--- a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml
@@ -11,7 +11,7 @@ maintainers:
   - Kuldeep Singh <singh.kuldeep87k@gmail.com>
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
index 9a60c0664bbe..782a014b63a7 100644
--- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
@@ -49,6 +49,16 @@ properties:
       Delay in nanoseconds to be introduced by the controller after CS is
       asserted.
 
+  spi-cs-hold-delay-ns:
+    description:
+      Delay in nanoseconds to be introduced by the controller before CS is
+      de-asserted.
+
+  spi-cs-inactive-delay-ns:
+    description:
+      Delay in nanoseconds to be introduced by the controller after CS is
+      de-asserted.
+
   spi-rx-bus-width:
     description:
       Bus width to the SPI bus used for read transfers.
diff --git a/Documentation/devicetree/bindings/spi/spi-pl022.yaml b/Documentation/devicetree/bindings/spi/spi-pl022.yaml
index 0e382119c64f..91e540a92faf 100644
--- a/Documentation/devicetree/bindings/spi/spi-pl022.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-pl022.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 # We need a select here so we don't match all nodes with 'arm,primecell'
 select:
@@ -45,7 +45,7 @@ properties:
     description: delay in ms following transfer completion before the
       runtime power management system suspends the device. A setting of 0
       indicates no delay and the device will be suspended immediately.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   pl022,rt:
     description: indicates the controller should run the message pump with realtime
@@ -81,7 +81,7 @@ patternProperties:
     properties:
       pl022,interface:
         description: SPI interface type
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         enum:
           - 0      # SPI
           - 1      # Texas Instruments Synchronous Serial Frame Format
@@ -89,7 +89,7 @@ patternProperties:
 
       pl022,com-mode:
         description: Specifies the transfer mode
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         enum:
           - 0      # interrupt mode
           - 1      # polling mode
@@ -98,30 +98,30 @@ patternProperties:
 
       pl022,rx-level-trig:
         description: Rx FIFO watermark level
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 4
 
       pl022,tx-level-trig:
         description: Tx FIFO watermark level
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 4
 
       pl022,ctrl-len:
         description: Microwire interface - Control length
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0x03
         maximum: 0x1f
 
       pl022,wait-state:
         description: Microwire interface - Wait state
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         enum: [0, 1]
 
       pl022,duplex:
         description: Microwire interface - Full/Half duplex
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         enum: [0, 1]
 
 required:
diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
index 66e49947b703..e4941e9212d1 100644
--- a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
@@ -11,7 +11,7 @@ description:
   as flash and display controllers using the SPI communication interface.
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 maintainers:
   - Heiko Stuebner <heiko@sntech.de>
diff --git a/Documentation/devicetree/bindings/spi/spi-sifive.yaml b/Documentation/devicetree/bindings/spi/spi-sifive.yaml
index 6e7e394fc1e4..5bffefb9c7eb 100644
--- a/Documentation/devicetree/bindings/spi/spi-sifive.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-sifive.yaml
@@ -12,7 +12,7 @@ maintainers:
   - Palmer Dabbelt <palmer@sifive.com>
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 properties:
   compatible:
@@ -51,14 +51,14 @@ properties:
   sifive,fifo-depth:
     description:
       Depth of hardware queues; defaults to 8
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [8]
     default: 8
 
   sifive,max-bits-per-word:
     description:
       Maximum bits per word; defaults to 8
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1, 2, 3, 4, 5, 6, 7, 8]
     default: 8
 
diff --git a/Documentation/devicetree/bindings/spi/spi-st-ssc.txt b/Documentation/devicetree/bindings/spi/spi-st-ssc.txt
deleted file mode 100644
index 1bdc4709e474..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-st-ssc.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-STMicroelectronics SSC (SPI) Controller
----------------------------------------
-
-Required properties:
-- compatible	: "st,comms-ssc4-spi"
-- reg		: Offset and length of the device's register set
-- interrupts	: The interrupt specifier
-- clock-names	: Must contain "ssc"
-- clocks	: Must contain an entry for each name in clock-names
-		    See ../clk/*
-- pinctrl-names	: Uses "default", can use "sleep" if provided
-		    See ../pinctrl/pinctrl-bindings.txt
-
-Optional properties:
-- cs-gpios	: List of GPIO chip selects
-		    See ../spi/spi-bus.txt
-
-Child nodes represent devices on the SPI bus
-  See ../spi/spi-bus.txt
-
-Example:
-	spi@9840000 {
-		compatible	= "st,comms-ssc4-spi";
-		reg		= <0x9840000 0x110>;
-		interrupts	= <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-		clocks		= <&clk_s_c0_flexgen CLK_EXT2F_A9>;
-		clock-names	= "ssc";
-		pinctrl-0	= <&pinctrl_spi0_default>;
-		pinctrl-names	= "default";
-		cs-gpios	= <&pio17 5 0>;
-		#address-cells	= <1>;
-		#size-cells	= <0>;
-
-		st95hf@0{
-			compatible		= "st,st95hf";
-			reg			= <0>;
-			spi-max-frequency	= <1000000>;
-			interrupts		= <2 IRQ_TYPE_EDGE_FALLING>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml b/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml
index 3a58cf0f1ec8..edb5ba71af3a 100644
--- a/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml
@@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Sunplus sp7021 SPI controller
 
 allOf:
-  - $ref: "spi-controller.yaml"
+  - $ref: spi-controller.yaml
 
 maintainers:
   - Li-hao Kuo <lhjeff911@gmail.com>
@@ -59,9 +59,9 @@ unevaluatedProperties: false
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
-    spi@9C002D80 {
+    spi@9c002d80 {
         compatible = "sunplus,sp7021-spi";
-        reg = <0x9C002D80 0x80>, <0x9C002E00 0x80>;
+        reg = <0x9c002d80 0x80>, <0x9c002e00 0x80>;
         reg-names = "master", "slave";
         interrupt-parent = <&intc>;
         interrupt-names = "dma_w",
diff --git a/Documentation/devicetree/bindings/spi/spi-xilinx.yaml b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml
index bbb735603f29..6bd83836eded 100644
--- a/Documentation/devicetree/bindings/spi/spi-xilinx.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Michal Simek <michal.simek@xilinx.com>
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml
index 546c416cdb55..20f77246d365 100644
--- a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Michal Simek <michal.simek@xilinx.com>
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml b/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml
index a3ab1a1f1eb4..903b06f88b1b 100644
--- a/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml
+++ b/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml
@@ -1,9 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/spi/sprd,spi-adi.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/spi/sprd,spi-adi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Spreadtrum ADI controller
 
diff --git a/Documentation/devicetree/bindings/spi/st,ssc-spi.yaml b/Documentation/devicetree/bindings/spi/st,ssc-spi.yaml
new file mode 100644
index 000000000000..6a77cd3f5d6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/st,ssc-spi.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/st,ssc-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics SSC SPI Controller
+
+description: |
+  The STMicroelectronics SSC SPI controller can be found on STi platforms
+  and it used to communicate with external devices using the
+  Serial Peripheral Interface.
+
+maintainers:
+  - Patrice Chotard <patrice.chotard@foss.st.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    const: st,comms-ssc4-spi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ssc
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stih407-clks.h>
+    spi@9840000 {
+      compatible = "st,comms-ssc4-spi";
+      reg = <0x9840000 0x110>;
+      interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+      clock-names = "ssc";
+      pinctrl-0 = <&pinctrl_spi0_default>;
+      pinctrl-names = "default";
+      #address-cells = <1>;
+      #size-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
index 1eb17f7a4d86..8bba965a9ae6 100644
--- a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
@@ -11,7 +11,7 @@ maintainers:
   - Patrice Chotard <patrice.chotard@foss.st.com>
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
index 1cda15f91cc3..9ca1a843c820 100644
--- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
@@ -17,7 +17,7 @@ maintainers:
   - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
   - if:
       properties:
         compatible:
@@ -84,18 +84,17 @@ examples:
     #include <dt-bindings/clock/stm32mp1-clks.h>
     #include <dt-bindings/reset/stm32mp1-resets.h>
     spi@4000b000 {
-      #address-cells = <1>;
-      #size-cells = <0>;
-      compatible = "st,stm32h7-spi";
-      reg = <0x4000b000 0x400>;
-      interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-      clocks = <&rcc SPI2_K>;
-      resets = <&rcc SPI2_R>;
-      dmas = <&dmamux1 0 39 0x400 0x05>,
-             <&dmamux1 1 40 0x400 0x05>;
-      dma-names = "rx", "tx";
-      cs-gpios = <&gpioa 11 0>;
-
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "st,stm32h7-spi";
+        reg = <0x4000b000 0x400>;
+        interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&rcc SPI2_K>;
+        resets = <&rcc SPI2_R>;
+        dmas = <&dmamux1 0 39 0x400 0x05>,
+               <&dmamux1 1 40 0x400 0x05>;
+        dma-names = "rx", "tx";
+        cs-gpios = <&gpioa 11 0>;
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml b/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml
index 1f1c40a9f320..83e8fb4a548d 100644
--- a/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml
@@ -11,7 +11,7 @@ description:
   memory devices.
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 maintainers:
   - Michal Simek <michal.simek@xilinx.com>
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index f5c0a6283e61..6d1dc1e2484a 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -65,6 +65,8 @@ properties:
           - capella,cm3232
             # CM3323: Ambient Light Sensor
           - capella,cm3323
+            # Cisco SPI Petra
+          - cisco,spi-petra
             # High-Precision Digital Thermometer
           - dallas,ds1631
             # Total-Elapsed-Time Recorder with Alarm
@@ -169,6 +171,8 @@ properties:
           - isil,isl29030
             # Intersil ISL68137 Digital Output Configurable PWM Controller
           - isil,isl68137
+            # Linear Technology LTC2488
+          - lineartechnology,ltc2488
             # 5 Bit Programmable, Pulse-Width Modulator
           - maxim,ds1050
             # 10 kOhm digital potentiometer with I2C interface
@@ -227,6 +231,8 @@ properties:
           - memsic,mxc6655
             # Menlo on-board CPLD trivial SPI device
           - menlo,m53cpld
+            # Micron SPI NOR Authenta
+          - micron,spi-authenta
             # Microchip differential I2C ADC, 1 Channel, 18 bit
           - microchip,mcp3421
             # Microchip differential I2C ADC, 2 Channel, 18 bit
@@ -305,10 +311,14 @@ properties:
           - pulsedlight,lidar-lite-v2
             # Renesas ISL29501 time-of-flight sensor
           - renesas,isl29501
+            # Rohm DH2228FV
+          - rohm,dh2228fv
             # S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power)
           - samsung,24ad0xd1
             # Samsung Exynos SoC SATA PHY I2C device
           - samsung,exynos-sataphy-i2c
+            # Semtech sx1301 baseband processor
+          - semtech,sx1301
             # Sensirion low power multi-pixel gas sensor with I2C interface
           - sensirion,sgpc3
             # Sensirion multi-pixel gas sensor with I2C interface
@@ -323,6 +333,10 @@ properties:
           - sensortek,stk8ba50
             # SGX Sensortech VZ89X Sensors
           - sgx,vz89x
+            # Silicon Labs EM3581 Zigbee SoC with SPI interface
+          - silabs,em3581
+            # Silicon Labs SI3210 Programmable CMOS SLIC/CODEC with SPI interface
+          - silabs,si3210
             # Relative Humidity and Temperature Sensors
           - silabs,si7020
             # Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply