Merge tag 'pwm/for-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This set of changes contains a new driver for SiFive SoCs as well as
  enhancements to the core (device links are used to track dependencies
  between PWM providers and consumers, support for PWM controllers via
  ACPI, sysfs will now suspend/resume PWMs that it has claimed) and
  various existing drivers"

* tag 'pwm/for-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (37 commits)
  pwm: fsl-ftm: Make sure to unlock mutex on failure
  pwm: fsl-ftm: Use write protection for prescaler & polarity
  pwm: fsl-ftm: More relaxed permissions for updating period
  pwm: atmel-hlcdc: Add compatible for SAM9X60 HLCDC's PWM
  pwm: bcm2835: Improve precision of PWM
  leds: pwm: Support ACPI via firmware-node framework
  pwm: Add support referencing PWMs from ACPI
  pwm: rcar: Remove suspend/resume support
  pwm: sysfs: Add suspend/resume support
  pwm: Add power management descriptions
  pwm: meson: Add documentation to the driver
  pwm: meson: Add support PWM_POLARITY_INVERSED when disabling
  pwm: meson: Don't cache struct pwm_state internally
  pwm: meson: Read the full hardware state in meson_pwm_get_state()
  pwm: meson: Simplify the calculation of the pre-divider and count
  pwm: meson: Move pwm_set_chip_data() to meson_pwm_request()
  pwm: meson: Add the per-channel register offsets and bits in a struct
  pwm: meson: Add the meson_pwm_channel data to struct meson_pwm
  pwm: meson: Pass struct pwm_device to meson_pwm_calc()
  pwm: meson: Don't duplicate the polarity internally
  ...

4 files changed, 43 insertions, 7 deletions

diff --git a/Documentation/devicetree/bindings/pwm/ingenic,jz47xx-pwm.txt b/Documentation/devicetree/bindings/pwm/ingenic,jz47xx-pwm.txt
index 7d9d3f90641b..493bec80d59b 100644
--- a/Documentation/devicetree/bindings/pwm/ingenic,jz47xx-pwm.txt
+++ b/Documentation/devicetree/bindings/pwm/ingenic,jz47xx-pwm.txt
@@ -2,10 +2,7 @@ Ingenic JZ47xx PWM Controller
 =============================
 
 Required properties:
-- compatible: One of:
-  * "ingenic,jz4740-pwm"
-  * "ingenic,jz4770-pwm"
-  * "ingenic,jz4780-pwm"
+- compatible: Should be "ingenic,jz4740-pwm"
 - #pwm-cells: Should be 3. See pwm.txt in this directory for a description
   of the cells format.
 - clocks : phandle to the external clock.
diff --git a/Documentation/devicetree/bindings/pwm/pwm-sifive.txt b/Documentation/devicetree/bindings/pwm/pwm-sifive.txt
new file mode 100644
index 000000000000..36447e3c9378
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-sifive.txt
@@ -0,0 +1,33 @@
+SiFive PWM controller
+
+Unlike most other PWM controllers, the SiFive PWM controller currently only
+supports one period for all channels in the PWM. All PWMs need to run at
+the same period. The period also has significant restrictions on the values
+it can achieve, which the driver rounds to the nearest achievable period.
+PWM RTL that corresponds to the IP block version numbers can be found
+here:
+
+https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/pwm
+
+Required properties:
+- compatible: Should be "sifive,<chip>-pwm" and "sifive,pwm<version>".
+  Supported compatible strings are: "sifive,fu540-c000-pwm" for the SiFive
+  PWM v0 as integrated onto the SiFive FU540 chip, and "sifive,pwm0" for the
+  SiFive PWM v0 IP block with no chip integration tweaks.
+  Please refer to sifive-blocks-ip-versioning.txt for details.
+- reg: physical base address and length of the controller's registers
+- clocks: Should contain a clock identifier for the PWM's parent clock.
+- #pwm-cells: Should be 3. See pwm.txt in this directory
+  for a description of the cell format.
+- interrupts: one interrupt per PWM channel
+
+Examples:
+
+pwm:  pwm@10020000 {
+	compatible = "sifive,fu540-c000-pwm", "sifive,pwm0";
+	reg = <0x0 0x10020000 0x0 0x1000>;
+	clocks = <&tlclk>;
+	interrupt-parent = <&plic>;
+	interrupts = <42 43 44 45>;
+	#pwm-cells = <3>;
+};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt b/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt
index bd23302e84be..6521bc44a74e 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt
@@ -11,8 +11,10 @@ Required parameters:
 			bindings defined in pwm.txt.
 
 Optional properties:
-- pinctrl-names: 	Set to "default".
-- pinctrl-0: 		Phandle pointing to pin configuration node for PWM.
+- pinctrl-names: 	Set to "default". An additional "sleep" state can be
+			defined to set pins in sleep state when in low power.
+- pinctrl-n: 		Phandle(s) pointing to pin configuration node for PWM,
+			respectively for "default" and "sleep" states.
 
 Example:
 	timer@40002400 {
@@ -21,7 +23,8 @@ Example:
 		pwm {
 			compatible = "st,stm32-pwm-lp";
 			#pwm-cells = <3>;
-			pinctrl-names = "default";
+			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&lppwm1_pins>;
+			pinctrl-1 = <&lppwm1_sleep_pins>;
 		};
 	};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-stm32.txt b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt
index 3e6d55018d7a..a8690bfa5e1f 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-stm32.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt
@@ -8,6 +8,8 @@ Required parameters:
 - pinctrl-names: 	Set to "default".
 - pinctrl-0: 		List of phandles pointing to pin configuration nodes for PWM module.
 			For Pinctrl properties see ../pinctrl/pinctrl-bindings.txt
+- #pwm-cells:		Should be set to 3. This PWM chip uses the default 3 cells
+			bindings defined in pwm.txt.
 
 Optional parameters:
 - st,breakinput:	One or two <index level filter> to describe break input configurations.
@@ -28,6 +30,7 @@ Example:
 
 		pwm {
 			compatible = "st,stm32-pwm";
+			#pwm-cells = <3>;
 			pinctrl-0	= <&pwm1_pins>;
 			pinctrl-names	= "default";
 			st,breakinput = <0 1 5>;