summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2021-04-30 22:48:14 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2021-04-30 22:48:14 +0300
commitb71428d7ab333a157216a1d73c8c82a178efada9 (patch)
tree94d268210d84948d5984f2fbe7d890c4aed1fabe /Documentation/devicetree
parent95275402f66e88c56144a2d859c13594b651b29b (diff)
parent2e6a731296be9d356fdccee9fb6ae345dad96438 (diff)
downloadlinux-b71428d7ab333a157216a1d73c8c82a178efada9.tar.xz
Merge tag 'sound-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai: "No surprises in this development cycle, and most of work is about the fixes and the improvements of the existing code, while a new LED control layer and a few new drivers have been introduced. Here are some highlights: Core: - A common mute-LED framework was introduced. It is used by HD-audio for now, more adaption will follow later. The former "Mic Mute-LED Mode" mixer control has been replaced with the corresponding sysfs now. - User-control management was changed to count consumed bytes instead of capping by number of elements; this will allow more controls in the normal usage pattern while avoiding the possible memory exhaustion DoS ASoC: - Continued refactoring and cleanups in ASoC core and generic card drivers - Wide range of small cppcheck and warning fixes - New drivers for Freescale i.MX DMA over rpmsg, Mediatek MT6358 accessory detection, and Realtek RT1019, RT1316, RT711 and RT715 USB-audio: - Continued improvements and fixes of the implicit feedback mode, including better support for Pioneer and Roland/BOSS devices HD-audio: - Default back to non-buffer preallocation on x86 - Cirrus codec improvements, more quirks for Realtek codecs Others: - New virtio sound driver - FireWire Bebob updates" * tag 'sound-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (587 commits) ALSA: hda/conexant: Re-order CX5066 quirk table entries ALSA: hda/realtek: Remove redundant entry for ALC861 Haier/Uniwill devices ALSA: hda/realtek: Re-order ALC662 quirk table entries ALSA: hda/realtek: Re-order remaining ALC269 quirk table entries ALSA: hda/realtek: Re-order ALC269 Lenovo quirk table entries ALSA: hda/realtek: Re-order ALC269 Sony quirk table entries ALSA: hda/realtek: Re-order ALC269 ASUS quirk table entries ALSA: hda/realtek: Re-order ALC269 Dell quirk table entries ALSA: hda/realtek: Re-order ALC269 Acer quirk table entries ALSA: hda/realtek: Re-order ALC269 HP quirk table entries ALSA: hda/realtek: Re-order ALC882 Clevo quirk table entries ALSA: hda/realtek: Re-order ALC882 Sony quirk table entries ALSA: hda/realtek: Re-order ALC882 Acer quirk table entries ALSA: usb-audio: Remove redundant assignment to len ALSA: hda/realtek: Add quirk for Intel Clevo PCx0Dx ALSA: virtio: fix kernel-doc ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB ALSA: sb: Fix two use after free in snd_sb_qsound_build ALSA: emu8000: Fix a use after free in snd_emu8000_create_mixer ...
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/sound/ak5558.txt2
-rw-r--r--Documentation/devicetree/bindings/sound/audio-graph-port.yaml104
-rw-r--r--Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml108
-rw-r--r--Documentation/devicetree/bindings/sound/fsl-asoc-card.txt2
-rw-r--r--Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml2
-rw-r--r--Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml6
-rw-r--r--Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml108
-rw-r--r--Documentation/devicetree/bindings/sound/mchp-i2s-mcc.txt43
-rw-r--r--Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt1
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml11
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml11
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml27
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml11
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml11
-rw-r--r--Documentation/devicetree/bindings/sound/renesas,rsnd.yaml5
-rw-r--r--Documentation/devicetree/bindings/sound/rt1019.yaml35
-rw-r--r--Documentation/devicetree/bindings/sound/rt5682.txt2
-rw-r--r--Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml8
-rw-r--r--Documentation/devicetree/bindings/sound/socionext,uniphier-evea.yaml8
-rw-r--r--Documentation/devicetree/bindings/sound/tlv320aic3x.txt21
20 files changed, 381 insertions, 145 deletions
diff --git a/Documentation/devicetree/bindings/sound/ak5558.txt b/Documentation/devicetree/bindings/sound/ak5558.txt
index 36934098170c..e28708db6686 100644
--- a/Documentation/devicetree/bindings/sound/ak5558.txt
+++ b/Documentation/devicetree/bindings/sound/ak5558.txt
@@ -4,7 +4,7 @@ This device supports I2C mode only.
Required properties:
-- compatible : "asahi-kasei,ak5558"
+- compatible : "asahi-kasei,ak5558" or "asahi-kasei,ak5552".
- reg : The I2C address of the device.
Optional properties:
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
index 766e9109b2f7..43e7f86e3b23 100644
--- a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
+++ b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
@@ -11,71 +11,59 @@ maintainers:
select: false
+allOf:
+ - $ref: /schemas/graph.yaml#/$defs/port-base
+
properties:
- port:
- description: single OF-Graph subnode
- type: object
+ prefix:
+ description: "device name prefix"
+ $ref: /schemas/types.yaml#/definitions/string
+ convert-rate:
+ description: CPU to Codec rate convert.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ convert-channels:
+ description: CPU to Codec rate channels.
+ $ref: /schemas/types.yaml#/definitions/uint32
+patternProperties:
+ "^endpoint(@[0-9a-f]+)?":
+ $ref: /schemas/graph.yaml#/$defs/endpoint-base
properties:
- reg:
- maxItems: 1
- prefix:
- description: "device name prefix"
- $ref: /schemas/types.yaml#/definitions/string
+ mclk-fs:
+ description: |
+ Multiplication factor between stream rate and codec mclk.
+ When defined, mclk-fs property defined in dai-link sub nodes are
+ ignored.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ frame-inversion:
+ description: dai-link uses frame clock inversion
+ $ref: /schemas/types.yaml#/definitions/flag
+ bitclock-inversion:
+ description: dai-link uses bit clock inversion
+ $ref: /schemas/types.yaml#/definitions/flag
+ frame-master:
+ description: Indicates dai-link frame master.
+ $ref: /schemas/types.yaml#/definitions/phandle
+ bitclock-master:
+ description: Indicates dai-link bit clock master
+ $ref: /schemas/types.yaml#/definitions/phandle
+ dai-format:
+ description: audio format.
+ items:
+ enum:
+ - i2s
+ - right_j
+ - left_j
+ - dsp_a
+ - dsp_b
+ - ac97
+ - pdm
+ - msb
+ - lsb
convert-rate:
description: CPU to Codec rate convert.
$ref: /schemas/types.yaml#/definitions/uint32
convert-channels:
description: CPU to Codec rate channels.
$ref: /schemas/types.yaml#/definitions/uint32
- patternProperties:
- "^endpoint(@[0-9a-f]+)?":
- type: object
- properties:
- remote-endpoint:
- maxItems: 1
- mclk-fs:
- description: |
- Multiplication factor between stream rate and codec mclk.
- When defined, mclk-fs property defined in dai-link sub nodes are
- ignored.
- $ref: /schemas/types.yaml#/definitions/uint32
- frame-inversion:
- description: dai-link uses frame clock inversion
- $ref: /schemas/types.yaml#/definitions/flag
- bitclock-inversion:
- description: dai-link uses bit clock inversion
- $ref: /schemas/types.yaml#/definitions/flag
- frame-master:
- description: Indicates dai-link frame master.
- $ref: /schemas/types.yaml#/definitions/phandle
- bitclock-master:
- description: Indicates dai-link bit clock master
- $ref: /schemas/types.yaml#/definitions/phandle
- dai-format:
- description: audio format.
- items:
- enum:
- - i2s
- - right_j
- - left_j
- - dsp_a
- - dsp_b
- - ac97
- - pdm
- - msb
- - lsb
- convert-rate:
- description: CPU to Codec rate convert.
- $ref: /schemas/types.yaml#/definitions/uint32
- convert-channels:
- description: CPU to Codec rate channels.
- $ref: /schemas/types.yaml#/definitions/uint32
-
- ports:
- description: multi OF-Graph subnode
- type: object
- patternProperties:
- "^port(@[0-9a-f]+)?":
- $ref: "#/properties/port"
additionalProperties: true
diff --git a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml
new file mode 100644
index 000000000000..b4c190bddd84
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,rpmsg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Audio RPMSG CPU DAI Controller
+
+maintainers:
+ - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+description: |
+ fsl_rpmsg is a virtual audio device. Mapping to real hardware devices
+ are SAI, DMA controlled by Cortex M core. What we see from Linux
+ side is a device which provides audio service by rpmsg channel.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx7ulp-rpmsg-audio
+ - fsl,imx8mn-rpmsg-audio
+ - fsl,imx8mm-rpmsg-audio
+ - fsl,imx8mp-rpmsg-audio
+
+ model:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: User specified audio sound card name
+
+ clocks:
+ items:
+ - description: Peripheral clock for register access
+ - description: Master clock
+ - description: DMA clock for DMA register access
+ - description: Parent clock for multiple of 8kHz sample rates
+ - description: Parent clock for multiple of 11kHz sample rates
+
+ clock-names:
+ items:
+ - const: ipg
+ - const: mclk
+ - const: dma
+ - const: pll8k
+ - const: pll11k
+
+ power-domains:
+ description:
+ List of phandle and PM domain specifier as documented in
+ Documentation/devicetree/bindings/power/power_domain.txt
+ maxItems: 1
+
+ memory-region:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to a node describing reserved memory (System RAM memory)
+ The M core can't access all the DDR memory space on some platform,
+ So reserved a specific memory for dma buffer which M core can
+ access.
+ (see bindings/reserved-memory/reserved-memory.txt)
+
+ audio-codec:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: The phandle to a node of audio codec
+
+ audio-routing:
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ description: |
+ A list of the connections between audio components. Each entry is a
+ pair of strings, the first being the connection's sink, the second
+ being the connection's source.
+
+ fsl,enable-lpa:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: enable low power audio path.
+
+ fsl,rpmsg-out:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ This is a boolean property. If present, the transmitting function
+ will be enabled.
+
+ fsl,rpmsg-in:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ This is a boolean property. If present, the receiving function
+ will be enabled.
+
+required:
+ - compatible
+ - model
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8mn-clock.h>
+
+ rpmsg_audio: rpmsg_audio {
+ compatible = "fsl,imx8mn-rpmsg-audio";
+ model = "wm8524-audio";
+ fsl,enable-lpa;
+ fsl,rpmsg-out;
+ clocks = <&clk IMX8MN_CLK_SAI3_IPG>,
+ <&clk IMX8MN_CLK_SAI3_ROOT>,
+ <&clk IMX8MN_CLK_SDMA3_ROOT>,
+ <&clk IMX8MN_AUDIO_PLL1_OUT>,
+ <&clk IMX8MN_AUDIO_PLL2_OUT>;
+ clock-names = "ipg", "mclk", "dma", "pll8k", "pll11k";
+ };
diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
index 90d9e9d81624..23d83fa7609f 100644
--- a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
+++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
@@ -42,6 +42,8 @@ The compatible list for this generic sound card currently:
"fsl,imx-audio-si476x"
+ "fsl,imx-audio-wm8958"
+
Required properties:
- compatible : Contains one of entries in the compatible list.
diff --git a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml
index 6f71294909a5..803627e984f6 100644
--- a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml
@@ -81,6 +81,6 @@ examples:
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "osc", "apb_clk";
clocks = <&scmi_clk KEEM_BAY_PSS_AUX_I2S3>, <&scmi_clk KEEM_BAY_PSS_I2S3>;
- dmas = <&axi_dma0 29 &axi_dma0 33>;
+ dmas = <&axi_dma0 29>, <&axi_dma0 33>;
dma-names = "tx", "rx";
};
diff --git a/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml b/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml
index 234f64a32184..81f266d66ec5 100644
--- a/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml
+++ b/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml
@@ -9,9 +9,6 @@ title: Marvel SSPA Digital Audio Interface Bindings
maintainers:
- Lubomir Rintel <lkundrak@v3.sk>
-allOf:
- - $ref: audio-graph-port.yaml#
-
properties:
$nodename:
pattern: "^audio-controller(@.*)?$"
@@ -54,7 +51,8 @@ properties:
- const: rx
port:
- type: object
+ $ref: audio-graph-port.yaml#
+ unevaluatedProperties: false
properties:
endpoint:
diff --git a/Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml b/Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml
new file mode 100644
index 000000000000..0481315cb5f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mchp,i2s-mcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip I2S Multi-Channel Controller
+
+maintainers:
+ - Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+
+description:
+ The I2SMCC complies with the Inter-IC Sound (I2S) bus specification and
+ supports a Time Division Multiplexed (TDM) interface with external
+ multi-channel audio codecs. It consists of a receiver, a transmitter and a
+ common clock generator that can be enabled separately to provide Adapter,
+ Client or Controller modes with receiver and/or transmitter active.
+ On later I2SMCC versions (starting with Microchip's SAMA7G5) I2S
+ multi-channel is supported by using multiple data pins, output and
+ input, without TDM.
+
+properties:
+ "#sound-dai-cells":
+ const: 0
+
+ compatible:
+ enum:
+ - microchip,sam9x60-i2smcc
+ - microchip,sama7g5-i2smcc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Peripheral Bus Clock
+ - description: Generic Clock (Optional). Should be set mostly when Master
+ Mode is required.
+ minItems: 1
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: gclk
+ minItems: 1
+
+ dmas:
+ items:
+ - description: TX DMA Channel
+ - description: RX DMA Channel
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+
+ microchip,tdm-data-pair:
+ description:
+ Represents the DIN/DOUT pair pins that are used to receive/send
+ TDM data. It is optional and it is only needed if the controller
+ uses the TDM mode.
+ $ref: /schemas/types.yaml#/definitions/uint8
+ enum: [0, 1, 2, 3]
+ default: 0
+
+if:
+ properties:
+ compatible:
+ const: microchip,sam9x60-i2smcc
+then:
+ properties:
+ microchip,tdm-data-pair: false
+
+required:
+ - "#sound-dai-cells"
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - dmas
+ - dma-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/dma/at91.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ i2s@f001c000 {
+ #sound-dai-cells = <0>;
+ compatible = "microchip,sam9x60-i2smcc";
+ reg = <0xf001c000 0x100>;
+ interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(36))>,
+ <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(37))>;
+ dma-names = "tx", "rx";
+ clocks = <&i2s_clk>, <&i2s_gclk>;
+ clock-names = "pclk", "gclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2s_default>;
+ };
diff --git a/Documentation/devicetree/bindings/sound/mchp-i2s-mcc.txt b/Documentation/devicetree/bindings/sound/mchp-i2s-mcc.txt
deleted file mode 100644
index 91ec83a6faed..000000000000
--- a/Documentation/devicetree/bindings/sound/mchp-i2s-mcc.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-* Microchip I2S Multi-Channel Controller
-
-Required properties:
-- compatible: Should be "microchip,sam9x60-i2smcc".
-- reg: Should be the physical base address of the controller and the
- length of memory mapped region.
-- interrupts: Should contain the interrupt for the controller.
-- dmas: Should be one per channel name listed in the dma-names property,
- as described in atmel-dma.txt and dma.txt files.
-- dma-names: Identifier string for each DMA request line in the dmas property.
- Two dmas have to be defined, "tx" and "rx".
-- clocks: Must contain an entry for each entry in clock-names.
- Please refer to clock-bindings.txt.
-- clock-names: Should be one of each entry matching the clocks phandles list:
- - "pclk" (peripheral clock) Required.
- - "gclk" (generated clock) Optional (1).
-
-Optional properties:
-- pinctrl-0: Should specify pin control groups used for this controller.
-- princtrl-names: Should contain only one value - "default".
-
-
-(1) : Only the peripheral clock is required. The generated clock is optional
- and should be set mostly when Master Mode is required.
-
-Example:
-
- i2s@f001c000 {
- compatible = "microchip,sam9x60-i2smcc";
- reg = <0xf001c000 0x100>;
- interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
- dmas = <&dma0
- (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
- AT91_XDMAC_DT_PERID(36))>,
- <&dma0
- (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
- AT91_XDMAC_DT_PERID(37))>;
- dma-names = "tx", "rx";
- clocks = <&i2s_clk>, <&i2s_gclk>;
- clock-names = "pclk", "gclk";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2s_default>;
- };
diff --git a/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt b/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt
index 235eac8aea7b..ecd46ed8eb98 100644
--- a/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt
+++ b/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt
@@ -4,6 +4,7 @@ Required properties:
- compatible : "mediatek,mt8183_mt6358_ts3a227_max98357" for MAX98357A codec
"mediatek,mt8183_mt6358_ts3a227_max98357b" for MAX98357B codec
"mediatek,mt8183_mt6358_ts3a227_rt1015" for RT1015 codec
+ "mediatek,mt8183_mt6358_ts3a227_rt1015p" for RT1015P codec
- mediatek,platform: the phandle of MT8183 ASoC platform
Optional properties:
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml
index b8645d9c38ac..5f6b37c251a8 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml
@@ -17,9 +17,6 @@ maintainers:
- Jon Hunter <jonathanh@nvidia.com>
- Sameer Pujar <spujar@nvidia.com>
-allOf:
- - $ref: audio-graph-port.yaml#
-
properties:
$nodename:
pattern: "^dspk@[0-9a-f]*$"
@@ -59,14 +56,18 @@ properties:
available instances on a Tegra SoC.
ports:
- type: object
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
+ $ref: audio-graph-port.yaml#
+ unevaluatedProperties: false
description: |
DSPK ACIF (Audio Client Interface) port connected to the
corresponding AHUB (Audio Hub) ACIF port.
port@1:
+ $ref: audio-graph-port.yaml#
+ unevaluatedProperties: false
description: |
DSPK DAP (Digital Audio Port) interface which can be connected
to external audio codec for playback.
@@ -80,7 +81,7 @@ required:
- assigned-clock-parents
- sound-name-prefix
-unevaluatedProperties: false
+additionalProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml
index 7cee7722df41..19eaacc3f12a 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml
@@ -17,9 +17,6 @@ maintainers:
- Jon Hunter <jonathanh@nvidia.com>
- Sameer Pujar <spujar@nvidia.com>
-allOf:
- - $ref: audio-graph-port.yaml#
-
properties:
$nodename:
pattern: "^admaif@[0-9a-f]*$"
@@ -41,6 +38,7 @@ properties:
dma-names: true
ports:
+ $ref: /schemas/graph.yaml#/properties/ports
description: |
Contains list of ACIF (Audio CIF) port nodes for ADMAIF channels.
The number of port nodes depends on the number of ADMAIF channels
@@ -48,6 +46,11 @@ properties:
in AHUB (Audio Hub). Each port is capable of data transfers in
both directions.
+ patternProperties:
+ '^port@[0-9]':
+ $ref: audio-graph-port.yaml#
+ unevaluatedProperties: false
+
if:
properties:
compatible:
@@ -92,7 +95,7 @@ required:
- dmas
- dma-names
-unevaluatedProperties: false
+additionalProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
index 31f3e51974bb..1118a9488345 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
@@ -17,9 +17,6 @@ maintainers:
- Jon Hunter <jonathanh@nvidia.com>
- Sameer Pujar <spujar@nvidia.com>
-allOf:
- - $ref: audio-graph-port.yaml#
-
properties:
$nodename:
pattern: "^ahub@[0-9a-f]*$"
@@ -60,12 +57,34 @@ properties:
ranges: true
ports:
+ $ref: /schemas/graph.yaml#/properties/ports
description: |
Contains list of ACIF (Audio CIF) port nodes for AHUB (Audio Hub).
These are connected to ACIF interfaces of AHUB clients. Thus the
number of port nodes depend on the number of clients that AHUB may
have depending on the SoC revision.
+ patternProperties:
+ '^port@[0-9]':
+ $ref: audio-graph-port.yaml#
+ unevaluatedProperties: false
+
+patternProperties:
+ '^i2s@[0-9a-f]+$':
+ type: object
+
+ '^dmic@[0-9a-f]+$':
+ type: object
+ $ref: nvidia,tegra210-dmic.yaml#
+
+ '^admaif@[0-9a-f]+$':
+ type: object
+ $ref: nvidia,tegra210-admaif.yaml#
+
+ '^dspk@[0-9a-f]+$':
+ type: object
+ $ref: nvidia,tegra186-dspk.yaml#
+
required:
- compatible
- reg
@@ -77,7 +96,7 @@ required:
- "#size-cells"
- ranges
-unevaluatedProperties: false
+additionalProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml
index 89f4f471be24..fd275a575055 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml
@@ -16,9 +16,6 @@ maintainers:
- Jon Hunter <jonathanh@nvidia.com>
- Sameer Pujar <spujar@nvidia.com>
-allOf:
- - $ref: audio-graph-port.yaml#
-
properties:
$nodename:
pattern: "^dmic@[0-9a-f]*$"
@@ -60,14 +57,18 @@ properties:
on the maximum available instances on a Tegra SoC.
ports:
- type: object
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
+ $ref: audio-graph-port.yaml#
+ unevaluatedProperties: false
description: |
DMIC ACIF (Audio Client Interface) port connected to the
corresponding AHUB (Audio Hub) ACIF port.
port@1:
+ $ref: audio-graph-port.yaml#
+ unevaluatedProperties: false
description: |
DMIC DAP (Digital Audio Port) interface which can be connected
to external audio codec for capture.
@@ -80,7 +81,7 @@ required:
- assigned-clocks
- assigned-clock-parents
-unevaluatedProperties: false
+additionalProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml
index 556460332ffb..38e52e7dbb40 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml
@@ -16,9 +16,6 @@ maintainers:
- Jon Hunter <jonathanh@nvidia.com>
- Sameer Pujar <spujar@nvidia.com>
-allOf:
- - $ref: audio-graph-port.yaml#
-
properties:
$nodename:
pattern: "^i2s@[0-9a-f]*$"
@@ -78,14 +75,18 @@ properties:
on the maximum available instances on a Tegra SoC.
ports:
- type: object
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
+ $ref: audio-graph-port.yaml#
+ unevaluatedProperties: false
description: |
I2S ACIF (Audio Client Interface) port connected to the
corresponding AHUB (Audio Hub) ACIF port.
port@1:
+ $ref: audio-graph-port.yaml#
+ unevaluatedProperties: false
description: |
I2S DAP (Digital Audio Port) interface which can be connected
to external audio codec for playback or capture.
@@ -98,7 +99,7 @@ required:
- assigned-clocks
- assigned-clock-parents
-unevaluatedProperties: false
+additionalProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
index e494a0416748..605de3a5847f 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
@@ -110,7 +110,9 @@ properties:
- pattern: '^dvc\.[0-1]$'
- pattern: '^clk_(a|b|c|i)$'
- port: true
+ port:
+ $ref: audio-graph-port.yaml#
+ unevaluatedProperties: false
# use patternProperties to avoid naming "xxx,yyy" issue
patternProperties:
@@ -256,7 +258,6 @@ required:
allOf:
- $ref: audio-graph.yaml#
- - $ref: audio-graph-port.yaml#
- if:
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/sound/rt1019.yaml b/Documentation/devicetree/bindings/sound/rt1019.yaml
new file mode 100644
index 000000000000..3d5a91a942f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt1019.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/rt1019.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RT1019 Mono Class-D Audio Amplifier
+
+maintainers:
+ - jack.yu@realtek.com
+
+properties:
+ compatible:
+ const: realtek,rt1019
+
+ reg:
+ maxItems: 1
+ description: I2C address of the device.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ rt1019: codec@28 {
+ compatible = "realtek,rt1019";
+ reg = <0x28>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/sound/rt5682.txt b/Documentation/devicetree/bindings/sound/rt5682.txt
index 9c5fadb6ac82..cd8c53d8497e 100644
--- a/Documentation/devicetree/bindings/sound/rt5682.txt
+++ b/Documentation/devicetree/bindings/sound/rt5682.txt
@@ -44,7 +44,7 @@ Optional properties:
- realtek,dmic-delay-ms : Set the delay time (ms) for the requirement of
the particular DMIC.
-- realtek,dmic-clk-driving-high : Set the high drving of the DMIC clock out.
+- realtek,dmic-clk-driving-high : Set the high driving of the DMIC clock out.
Pins on the device (for linking into audio routes) for RT5682:
diff --git a/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml b/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml
index 4987eb91f2ab..55ae198220f4 100644
--- a/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml
+++ b/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml
@@ -46,11 +46,9 @@ properties:
patternProperties:
"^port@[0-9]$":
- type: object
- properties:
- endpoint: true
- required:
- - endpoint
+ description: FIXME, Need to define what each port is.
+ $ref: audio-graph-port.yaml#
+ unevaluatedProperties: false
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/sound/socionext,uniphier-evea.yaml b/Documentation/devicetree/bindings/sound/socionext,uniphier-evea.yaml
index 228168f685cf..48ddfcbbcbae 100644
--- a/Documentation/devicetree/bindings/sound/socionext,uniphier-evea.yaml
+++ b/Documentation/devicetree/bindings/sound/socionext,uniphier-evea.yaml
@@ -40,11 +40,9 @@ properties:
patternProperties:
"^port@[0-9]$":
- type: object
- properties:
- endpoint: true
- required:
- - endpoint
+ description: FIXME, Need to define what each port is.
+ $ref: audio-graph-port.yaml#
+ unevaluatedProperties: false
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt
index 9796c4639262..20931a63fd64 100644
--- a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt
+++ b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt
@@ -1,6 +1,6 @@
Texas Instruments - tlv320aic3x Codec module
-The tlv320aic3x serial control bus communicates through I2C protocols
+The tlv320aic3x serial control bus communicates through both I2C and SPI bus protocols
Required properties:
@@ -63,7 +63,7 @@ CODEC input pins for other compatible codecs:
The pins can be used in referring sound node's audio-routing property.
-Example:
+I2C example:
#include <dt-bindings/gpio/gpio.h>
@@ -78,3 +78,20 @@ tlv320aic3x: tlv320aic3x@1b {
DRVDD-supply = <&regulator>;
DVDD-supply = <&regulator>;
};
+
+SPI example:
+
+spi0: spi@f0000000 {
+ tlv320aic3x: codec@0 {
+ compatible = "ti,tlv320aic3x";
+ reg = <0>; /* CS number */
+ #sound-dai-cells = <0>;
+ spi-max-frequency = <1000000>;
+
+ AVDD-supply = <&regulator>;
+ IOVDD-supply = <&regulator>;
+ DRVDD-supply = <&regulator>;
+ DVDD-supply = <&regulator>;
+ ai3x-ocmv = <0>;
+ };
+};