Merge tag 'imx-dt-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt

From Shawn Guo:

imx device tree changes for 3.11:

* A bunch of new board additions, imx6sl-evk, vf610-twr, imx53-tx53,
  imx53-m53evk and imx27-phytec-phycore
* Various pinctrl setting updates and additions
* Enable various on board peripherals, usb, audio, nor, display etc.
* Configure L2 cache data and tag latency from device tree
* Add imx-weim bus driver

* tag 'imx-dt-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6: (82 commits)
  ARM: dts: imx27: Add VPU devicetree node
  ARM: mxc: fix gpio-ranges for VF610
  ARM: dtsi: imx6qdl-sabresd: Enable WM8962 audio support
  ARM: dtsi: imx6qdl-sabresd: Enable SSI2 and AUDMUX
  ARM: dtsi: imx6qdl-sabresd: Add WM8962 CODEC support
  ARM: dtsi: imx6qdl-sabresd: add a fixed regulator for WM8962
  ARM: dtsi: imx6dl: Add a pinctrl for AUDMUX
  ARM: dtsi: imx6q/imx6dl: Add a pinctrl for I2C1
  ARM: dts: imx6qdl-sabresd: add clko1 iomux configuration
  ARM: dts: Phytec imx6q pfla02 and pbab01 support
  ARM: dts: imx6q: Add pinctrl for usdhc2 and enet
  ARM: dts: imx27-phytec-phycore-rdk: Add MTD name for NOR flash
  ARM: dts: imx27-phytec-phycore-rdk: Add SDHC support
  ARM: dts: i.MX27: Add SDHC devicetree nodes
  ARM: dts: i.MX27: Add DMA devicetree node
  ARM: dts: imx6qdl-sabreauto: enable the WEIM NOR
  ARM: dts: imx6dl: add pinctrls for WEIM NOR
  ARM: dts: imx6q: add pinctrls for WEIM NOR
  ARM: dts: imx6qdl: add more information for WEIM
  ARM: dts: imx6q{dl}: fix the pin conflict between SPI and WEIM
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

2 files changed, 50 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt
new file mode 100644
index 000000000000..cedc2a9c4785
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/imx-weim.txt
@@ -0,0 +1,49 @@
+Device tree bindings for i.MX Wireless External Interface Module (WEIM)
+
+The term "wireless" does not imply that the WEIM is literally an interface
+without wires. It simply means that this module was originally designed for
+wireless and mobile applications that use low-power technology.
+
+The actual devices are instantiated from the child nodes of a WEIM node.
+
+Required properties:
+
+ - compatible:		Should be set to "fsl,imx6q-weim"
+ - reg:			A resource specifier for the register space
+			(see the example below)
+ - clocks:		the clock, see the example below.
+ - #address-cells:	Must be set to 2 to allow memory address translation
+ - #size-cells:		Must be set to 1 to allow CS address passing
+ - ranges:		Must be set up to reflect the memory layout with four
+			integer values for each chip-select line in use:
+
+			   <cs-number> 0 <physical address of mapping> <size>
+
+Timing property for child nodes. It is mandatory, not optional.
+
+ - fsl,weim-cs-timing:	The timing array, contains 6 timing values for the
+			child node. We can get the CS index from the child
+			node's "reg" property. This property contains the values
+			for the registers EIM_CSnGCR1, EIM_CSnGCR2, EIM_CSnRCR1,
+			EIM_CSnRCR2, EIM_CSnWCR1, EIM_CSnWCR2 in this order.
+
+Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM:
+
+	weim: weim@021b8000 {
+		compatible = "fsl,imx6q-weim";
+		reg = <0x021b8000 0x4000>;
+		clocks = <&clks 196>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0x08000000 0x08000000>;
+
+		nor@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <2>;
+			fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
+					0x0000c000 0x1404a38e 0x00000000>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
index bcfdab5d442e..3a7caf7a744a 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
@@ -58,7 +58,7 @@ Some requirements for using fsl,imx-pinctrl binding:
 
 Examples:
 usdhc@0219c000 { /* uSDHC4 */
-	fsl,card-wired;
+	non-removable;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 	pinctrl-names = "default";