summaryrefslogtreecommitdiff
path: root/Documentation/filesystems
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-08-14 08:34:47 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2018-08-14 08:34:47 +0300
commit10f3e23f07cb0c20f9bcb77a5b5a7eb2a1b2a2fe (patch)
tree1fcb34309b3542512c6f3345f092f7adb8c3312c /Documentation/filesystems
parent3bb37da509e576c80180fa0e4d1cfcaddf0cb82e (diff)
parent863c37fcb14f8b66ea831b45fb35a53ac4a8d69e (diff)
downloadlinux-10f3e23f07cb0c20f9bcb77a5b5a7eb2a1b2a2fe.tar.xz
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o: - Convert content from the ext4 wiki to Documentation rst files so it is more likely to be updated as we add new features to ext4. - Add 64-bit timestamp support to ext4's superblock fields. - ... and the usual bug fixes and cleanups, including a Spectre gadget fixup and some hardening against maliciously corrupted file systems. * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (34 commits) ext4: remove unneeded variable "err" in ext4_mb_release_inode_pa() ext4: improve code readability in ext4_iget() ext4: fix spectre gadget in ext4_mb_regular_allocator() ext4: check for NUL characters in extended attribute's name ext4: use ext4_warning() for sb_getblk failure ext4: fix race when setting the bitmap corrupted flag ext4: reset error code in ext4_find_entry in fallback ext4: handle layout changes to pinned DAX mappings dax: dax_layout_busy_page() warn on !exceptional docs: fix up the obviously obsolete bits in the new ext4 documentation docs: add new ext4 superblock time extension fields docs: create filesystem internal section ext4: use swap macro in mext_page_double_lock ext4: check allocation failure when duplicating "data" in ext4_remount() ext4: fix warning message in ext4_enable_quotas() ext4: super: extend timestamps to 40 bits jbd2: replace current_kernel_time64 with ktime equivalent ext4: use timespec64 for all inode times ext4: use ktime_get_real_seconds for i_dtime ext4: use 64-bit timestamps for mmp_time ...
Diffstat (limited to 'Documentation/filesystems')
-rw-r--r--Documentation/filesystems/ext4/ext4.rst (renamed from Documentation/filesystems/ext4.txt)142
-rw-r--r--Documentation/filesystems/ext4/index.rst17
-rw-r--r--Documentation/filesystems/ext4/ondisk/about.rst44
-rw-r--r--Documentation/filesystems/ext4/ondisk/allocators.rst56
-rw-r--r--Documentation/filesystems/ext4/ondisk/attributes.rst191
-rw-r--r--Documentation/filesystems/ext4/ondisk/bigalloc.rst22
-rw-r--r--Documentation/filesystems/ext4/ondisk/bitmaps.rst28
-rw-r--r--Documentation/filesystems/ext4/ondisk/blockgroup.rst135
-rw-r--r--Documentation/filesystems/ext4/ondisk/blockmap.rst49
-rw-r--r--Documentation/filesystems/ext4/ondisk/blocks.rst142
-rw-r--r--Documentation/filesystems/ext4/ondisk/checksums.rst73
-rw-r--r--Documentation/filesystems/ext4/ondisk/directory.rst426
-rw-r--r--Documentation/filesystems/ext4/ondisk/dynamic.rst12
-rw-r--r--Documentation/filesystems/ext4/ondisk/eainode.rst18
-rw-r--r--Documentation/filesystems/ext4/ondisk/globals.rst13
-rw-r--r--Documentation/filesystems/ext4/ondisk/group_descr.rst170
-rw-r--r--Documentation/filesystems/ext4/ondisk/ifork.rst194
-rw-r--r--Documentation/filesystems/ext4/ondisk/index.rst9
-rw-r--r--Documentation/filesystems/ext4/ondisk/inlinedata.rst37
-rw-r--r--Documentation/filesystems/ext4/ondisk/inodes.rst575
-rw-r--r--Documentation/filesystems/ext4/ondisk/journal.rst611
-rw-r--r--Documentation/filesystems/ext4/ondisk/mmp.rst77
-rw-r--r--Documentation/filesystems/ext4/ondisk/overview.rst26
-rw-r--r--Documentation/filesystems/ext4/ondisk/special_inodes.rst38
-rw-r--r--Documentation/filesystems/ext4/ondisk/super.rst801
25 files changed, 3828 insertions, 78 deletions
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4/ext4.rst
index 7f628b9f7c4b..9d4368d591fa 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4/ext4.rst
@@ -1,6 +1,8 @@
+.. SPDX-License-Identifier: GPL-2.0
-Ext4 Filesystem
-===============
+========================
+General Information
+========================
Ext4 is an advanced level of the ext3 filesystem which incorporates
scalability and reliability enhancements for supporting large filesystems
@@ -11,37 +13,30 @@ Mailing list: linux-ext4@vger.kernel.org
Web site: http://ext4.wiki.kernel.org
-1. Quick usage instructions:
-===========================
+Quick usage instructions
+========================
Note: More extensive information for getting started with ext4 can be
- found at the ext4 wiki site at the URL:
- http://ext4.wiki.kernel.org/index.php/Ext4_Howto
+found at the ext4 wiki site at the URL:
+http://ext4.wiki.kernel.org/index.php/Ext4_Howto
- - Compile and install the latest version of e2fsprogs (as of this
- writing version 1.41.3) from:
+ - The latest version of e2fsprogs can be found at:
+
+ https://www.kernel.org/pub/linux/kernel/people/tytso/e2fsprogs/
- http://sourceforge.net/project/showfiles.php?group_id=2406
-
or
- https://www.kernel.org/pub/linux/kernel/people/tytso/e2fsprogs/
+ http://sourceforge.net/project/showfiles.php?group_id=2406
or grab the latest git repository from:
- git://git.kernel.org/pub/scm/fs/ext2/e2fsprogs.git
-
- - Note that it is highly important to install the mke2fs.conf file
- that comes with the e2fsprogs 1.41.x sources in /etc/mke2fs.conf. If
- you have edited the /etc/mke2fs.conf file installed on your system,
- you will need to merge your changes with the version from e2fsprogs
- 1.41.x.
+ https://git.kernel.org/pub/scm/fs/ext2/e2fsprogs.git
- Create a new filesystem using the ext4 filesystem type:
- # mke2fs -t ext4 /dev/hda1
+ # mke2fs -t ext4 /dev/hda1
- Or to configure an existing ext3 filesystem to support extents:
+ Or to configure an existing ext3 filesystem to support extents:
# tune2fs -O extents /dev/hda1
@@ -50,10 +45,6 @@ Note: More extensive information for getting started with ext4 can be
# tune2fs -I 256 /dev/hda1
- (Note: we currently do not have tools to convert an ext4
- filesystem back to ext3; so please do not do try this on production
- filesystems.)
-
- Mounting:
# mount -t ext4 /dev/hda1 /wherever
@@ -75,10 +66,11 @@ Note: More extensive information for getting started with ext4 can be
the filesystem with a large journal can also be helpful for
metadata-intensive workloads.
-2. Features
-===========
+Features
+========
-2.1 Currently available
+Currently Available
+-------------------
* ability to use filesystems > 16TB (e2fsprogs support not available yet)
* extent format reduces metadata overhead (RAM, IO for access, transactions)
@@ -103,31 +95,15 @@ Note: More extensive information for getting started with ext4 can be
[1] Filesystems with a block size of 1k may see a limit imposed by the
directory hash tree having a maximum depth of two.
-2.2 Candidate features for future inclusion
-
-* online defrag (patches available but not well tested)
-* reduced mke2fs time via lazy itable initialization in conjunction with
- the uninit_bg feature (capability to do this is available in e2fsprogs
- but a kernel thread to do lazy zeroing of unused inode table blocks
- after filesystem is first mounted is required for safety)
-
-There are several others under discussion, whether they all make it in is
-partly a function of how much time everyone has to work on them. Features like
-metadata checksumming have been discussed and planned for a bit but no patches
-exist yet so I'm not sure they're in the near-term roadmap.
-
-The big performance win will come with mballoc, delalloc and flex_bg
-grouping of bitmaps and inode tables. Some test results available here:
-
- - http://www.bullopensource.org/ext4/20080818-ffsb/ffsb-write-2.6.27-rc1.html
- - http://www.bullopensource.org/ext4/20080818-ffsb/ffsb-readwrite-2.6.27-rc1.html
-
-3. Options
-==========
+Options
+=======
When mounting an ext4 filesystem, the following option are accepted:
(*) == default
+======================= =======================================================
+Mount Option Description
+======================= =======================================================
ro Mount filesystem read only. Note that ext4 will
replay the journal (and thus write to the
partition) even when mounted "read only". The
@@ -387,33 +363,38 @@ i_version Enable 64-bit inode version support. This option is
dax Use direct access (no page cache). See
Documentation/filesystems/dax.txt. Note that
this option is incompatible with data=journal.
+======================= =======================================================
Data Mode
=========
There are 3 different data modes:
* writeback mode
-In data=writeback mode, ext4 does not journal data at all. This mode provides
-a similar level of journaling as that of XFS, JFS, and ReiserFS in its default
-mode - metadata journaling. A crash+recovery can cause incorrect data to
-appear in files which were written shortly before the crash. This mode will
-typically provide the best ext4 performance.
+
+ In data=writeback mode, ext4 does not journal data at all. This mode provides
+ a similar level of journaling as that of XFS, JFS, and ReiserFS in its default
+ mode - metadata journaling. A crash+recovery can cause incorrect data to
+ appear in files which were written shortly before the crash. This mode will
+ typically provide the best ext4 performance.
* ordered mode
-In data=ordered mode, ext4 only officially journals metadata, but it logically
-groups metadata information related to data changes with the data blocks into a
-single unit called a transaction. When it's time to write the new metadata
-out to disk, the associated data blocks are written first. In general,
-this mode performs slightly slower than writeback but significantly faster than journal mode.
+
+ In data=ordered mode, ext4 only officially journals metadata, but it logically
+ groups metadata information related to data changes with the data blocks into
+ a single unit called a transaction. When it's time to write the new metadata
+ out to disk, the associated data blocks are written first. In general, this
+ mode performs slightly slower than writeback but significantly faster than
+ journal mode.
* journal mode
-data=journal mode provides full data and metadata journaling. All new data is
-written to the journal first, and then to its final location.
-In the event of a crash, the journal can be replayed, bringing both data and
-metadata into a consistent state. This mode is the slowest except when data
-needs to be read from and written to disk at the same time where it
-outperforms all others modes. Enabling this mode will disable delayed
-allocation and O_DIRECT support.
+
+ data=journal mode provides full data and metadata journaling. All new data is
+ written to the journal first, and then to its final location. In the event of
+ a crash, the journal can be replayed, bringing both data and metadata into a
+ consistent state. This mode is the slowest except when data needs to be read
+ from and written to disk at the same time where it outperforms all others
+ modes. Enabling this mode will disable delayed allocation and O_DIRECT
+ support.
/proc entries
=============
@@ -425,10 +406,12 @@ Information about mounted ext4 file systems can be found in
in table below.
Files in /proc/fs/ext4/<devname>
-..............................................................................
+
+================ =======
File Content
+================ =======
mb_groups details of multiblock allocator buddy cache of free blocks
-..............................................................................
+================ =======
/sys entries
============
@@ -439,28 +422,30 @@ Information about mounted ext4 file systems can be found in
/sys/fs/ext4/dm-0). The files in each per-device directory are shown
in table below.
-Files in /sys/fs/ext4/<devname>
+Files in /sys/fs/ext4/<devname>:
+
(see also Documentation/ABI/testing/sysfs-fs-ext4)
-..............................................................................
- File Content
+============================= =================================================
+File Content
+============================= =================================================
delayed_allocation_blocks This file is read-only and shows the number of
blocks that are dirty in the page cache, but
which do not have their location in the
filesystem allocated yet.
- inode_goal Tuning parameter which (if non-zero) controls
+inode_goal Tuning parameter which (if non-zero) controls
the goal inode used by the inode allocator in
preference to all other allocation heuristics.
This is intended for debugging use only, and
should be 0 on production systems.
- inode_readahead_blks Tuning parameter which controls the maximum
+inode_readahead_blks Tuning parameter which controls the maximum
number of inode table blocks that ext4's inode
table readahead algorithm will pre-read into
the buffer cache
- lifetime_write_kbytes This file is read-only and shows the number of
+lifetime_write_kbytes This file is read-only and shows the number of
kilobytes of data that have been written to this
filesystem since it was created.
@@ -508,7 +493,7 @@ Files in /sys/fs/ext4/<devname>
in the file system. If there is not enough space
for the reserved space when mounting the file
mount will _not_ fail.
-..............................................................................
+============================= =================================================
Ioctls
======
@@ -518,8 +503,10 @@ through the system call interfaces. The list of all Ext4 specific ioctls are
shown in the table below.
Table of Ext4 specific ioctls
-..............................................................................
- Ioctl Description
+
+============================= =================================================
+Ioctl Description
+============================= =================================================
EXT4_IOC_GETFLAGS Get additional attributes associated with inode.
The ioctl argument is an integer bitfield, with
bit values described in ext4.h. This ioctl is an
@@ -610,8 +597,7 @@ Table of Ext4 specific ioctls
normal user by accident.
The data blocks of the previous boot loader
will be associated with the given inode.
-
-..............................................................................
+============================= =================================================
References
==========
diff --git a/Documentation/filesystems/ext4/index.rst b/Documentation/filesystems/ext4/index.rst
new file mode 100644
index 000000000000..71121605558c
--- /dev/null
+++ b/Documentation/filesystems/ext4/index.rst
@@ -0,0 +1,17 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============
+ext4 Filesystem
+===============
+
+General usage and on-disk artifacts writen by ext4. More documentation may
+be ported from the wiki as time permits. This should be considered the
+canonical source of information as the details here have been reviewed by
+the ext4 community.
+
+.. toctree::
+ :maxdepth: 5
+ :numbered:
+
+ ext4
+ ondisk/index
diff --git a/Documentation/filesystems/ext4/ondisk/about.rst b/Documentation/filesystems/ext4/ondisk/about.rst
new file mode 100644
index 000000000000..0aadba052264
--- /dev/null
+++ b/Documentation/filesystems/ext4/ondisk/about.rst
@@ -0,0 +1,44 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+About this Book
+===============
+
+This document attempts to describe the on-disk format for ext4
+filesystems. The same general ideas should apply to ext2/3 filesystems
+as well, though they do not support all the features that ext4 supports,
+and the fields will be shorter.
+
+**NOTE**: This is a work in progress, based on notes that the author
+(djwong) made while picking apart a filesystem by hand. The data
+structure definitions should be current as of Linux 4.18 and
+e2fsprogs-1.44. All comments and corrections are welcome, since there is
+undoubtedly plenty of lore that might not be reflected in freshly
+created demonstration filesystems.
+
+License
+-------
+This book is licensed under the terms of the GNU Public License, v2.
+
+Terminology
+-----------
+
+ext4 divides a storage device into an array of logical blocks both to
+reduce bookkeeping overhead and to increase throughput by forcing larger
+transfer sizes. Generally, the block size will be 4KiB (the same size as
+pages on x86 and the block layer's default block size), though the
+actual size is calculated as 2 ^ (10 + ``sb.s_log_block_size``) bytes.
+Throughout this document, disk locations are given in terms of these
+logical blocks, not raw LBAs, and not 1024-byte blocks. For the sake of
+convenience, the logical block size will be referred to as
+``$block_size`` throughout the rest of the document.
+
+When referenced in ``preformatted text`` blocks, ``sb`` refers to fields
+in the super block, and ``inode`` refers to fields in an inode table
+entry.
+
+Other References
+----------------
+
+Also see http://www.nongnu.org/ext2-doc/ for quite a collection of
+information about ext2/3. Here's another old reference:
+http://wiki.osdev.org/Ext2
diff --git a/Documentation/filesystems/ext4/ondisk/allocators.rst b/Documentation/filesystems/ext4/ondisk/allocators.rst
new file mode 100644
index 000000000000..7aa85152ace3
--- /dev/null
+++ b/Documentation/filesystems/ext4/ondisk/allocators.rst
@@ -0,0 +1,56 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Block and Inode Allocation Policy
+---------------------------------
+
+ext4 recognizes (better than ext3, anyway) that data locality is
+generally a desirably quality of a filesystem. On a spinning disk,
+keeping related blocks near each other reduces the amount of movement
+that the head actuator and disk must perform to access a data block,
+thus speeding up disk IO. On an SSD there of course are no moving parts,
+but locality can increase the size of each transfer request while
+reducing the total number of requests. This locality may also have the
+effect of concentrating writes on a single erase block, which can speed
+up file rewrites significantly. Therefore, it is useful to reduce
+fragmentation whenever possible.
+
+The first tool that ext4 uses to combat fragmentation is the multi-block
+allocator. When a file is first created, the block allocator
+speculatively allocates 8KiB of disk space to the file on the assumption
+that the space will get written soon. When the file is closed, the
+unused speculative allocations are of course freed, but if the
+speculation is correct (typically the case for full writes of small
+files) then the file data gets written out in a single multi-block
+extent. A second related trick that ext4 uses is delayed allocation.
+Under this scheme, when a file needs more blocks to absorb file writes,
+the filesystem defers deciding the exact placement on the disk until all
+the dirty buffers are being written out to disk. By not committing to a
+particular placement until it's absolutely necessary (the commit timeout
+is hit, or sync() is called, or the kernel runs out of memory), the hope
+is that the filesystem can make better location decisions.
+
+The third trick that ext4 (and ext3) uses is that it tries to keep a
+file's data blocks in the same block group as its inode. This cuts down
+on the seek penalty when the filesystem first has to read a file's inode
+to learn where the file's data blocks live and then seek over to the
+file's data blocks to begin I/O operations.
+
+The fourth trick is that all the inodes in a directory are placed in the
+same block group as the directory, when feasible. The working assumption
+here is that all the files in a directory might be related, therefore it
+is useful to try to keep them all together.
+
+The fifth trick is that the disk volume is cut up into 128MB block
+groups; these mini-containers are used as outlined above to try to
+maintain data locality. However, there is a deliberate quirk -- when a
+directory is created in the root directory, the inode allocator scans
+the block groups and puts that directory into the least heavily loaded
+block group that it can find. This encourages directories to spread out
+over a disk; as the top-level directory/file blobs fill up one block
+group, the allocators simply move on to the next block group. Allegedly
+this scheme evens out the loading on the block groups, though the author
+suspects that the directories which are so unlucky as to land towards
+the end of a spinning drive get a raw deal performance-wise.
+
+Of course if all of these mechanisms fail, one can always use e4defrag
+to defragment files.
diff --git a/Documentation/filesystems/ext4/ondisk/attributes.rst b/Documentation/filesystems/ext4/ondisk/attributes.rst
new file mode 100644
index 000000000000..0b01b67b81fe
--- /dev/null
+++ b/Documentation/filesystems/ext4/ondisk/attributes.rst
@@ -0,0 +1,191 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Extended Attributes
+-------------------
+
+Extended attributes (xattrs) are typically stored in a separate data
+block on the disk and referenced from inodes via ``inode.i_file_acl*``.
+The first use of extended attributes seems to have been for storing file
+ACLs and other security data (selinux). With the ``user_xattr`` mount
+option it is possible for users to store extended attributes so long as
+all attribute names begin with “user”; this restriction seems to have
+disappeared as of Linux 3.0.
+
+There are two places where extended attributes can be found. The first
+place is between the end of each inode entry and the beginning of the
+next inode entry. For example, if inode.i\_extra\_isize = 28 and
+sb.inode\_size = 256, then there are 256 - (128 + 28) = 100 bytes
+available for in-inode extended attribute storage. The second place
+where extended attributes can be found is in the block pointed to by
+``inode.i_file_acl``. As of Linux 3.11, it is not possible for this
+block to contain a pointer to a second extended attribute block (or even
+the remaining blocks of a cluster). In theory it is possible for each
+attribute's value to be stored in a separate data block, though as of
+Linux 3.11 the code does not permit this.
+
+Keys are generally assumed to be ASCIIZ strings, whereas values can be
+strings or binary data.
+
+Extended attributes, when stored after the inode, have a header
+``ext4_xattr_ibody_header`` that is 4 bytes long:
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Type
+ - Name
+ - Description
+ * - 0x0
+ - \_\_le32
+ - h\_magic
+ - Magic number for identification, 0xEA020000. This value is set by the
+ Linux driver, though e2fsprogs doesn't seem to check it(?)
+
+The beginning of an extended attribute block is in
+``struct ext4_xattr_header``, which is 32 bytes long:
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Type
+ - Name
+ - Description
+ * - 0x0
+ - \_\_le32
+ - h\_magic
+ - Magic number for identification, 0xEA020000.
+ * - 0x4
+ - \_\_le32
+ - h\_refcount
+ - Reference count.
+ * - 0x8
+ - \_\_le32
+ - h\_blocks
+ - Number of disk blocks used.
+ * - 0xC
+ - \_\_le32
+ - h\_hash
+ - Hash value of all attributes.
+ * - 0x10
+ - \_\_le32
+ - h\_checksum
+ - Checksum of the extended attribute block.
+ * - 0x14
+ - \_\_u32
+ - h\_reserved[2]
+ - Zero.
+
+The checksum is calculated against the FS UUID, the 64-bit block number
+of the extended attribute block, and the entire block (header +
+entries).
+
+Following the ``struct ext4_xattr_header`` or
+``struct ext4_xattr_ibody_header`` is an array of
+``struct ext4_xattr_entry``; each of these entries is at least 16 bytes
+long. When stored in an external block, the ``struct ext4_xattr_entry``
+entries must be stored in sorted order. The sort order is
+``e_name_index``, then ``e_name_len``, and finally ``e_name``.
+Attributes stored inside an inode do not need be stored in sorted order.
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Type
+ - Name
+ - Description
+ * - 0x0
+ - \_\_u8
+ - e\_name\_len
+ - Length of name.
+ * - 0x1
+ - \_\_u8
+ - e\_name\_index
+ - Attribute name index. There is a discussion of this below.
+ * - 0x2
+ - \_\_le16
+ - e\_value\_offs
+ - Location of this attribute's value on the disk block where it is stored.
+ Multiple attributes can share the same value. For an inode attribute
+ this value is relative to the start of the first entry; for a block this
+ value is relative to the start of the block (i.e. the header).
+ * - 0x4
+ - \_\_le32
+ - e\_value\_inum
+ - The inode where the value is stored. Zero indicates the value is in the
+ same block as this entry. This field is only used if the
+ INCOMPAT\_EA\_INODE feature is enabled.
+ * - 0x8
+ - \_\_le32
+ - e\_value\_size
+ - Length of attribute value.
+ * - 0xC
+ - \_\_le32
+ - e\_hash
+ - Hash value of attribute name and attribute value. The kernel doesn't
+ update the hash for in-inode attributes, so for that case this value
+ must be zero, because e2fsck validates any non-zero hash regardless of
+ where the xattr lives.
+ * - 0x10
+ - char
+ - e\_name[e\_name\_len]
+ - Attribute name. Does not include trailing NULL.
+
+Attribute values can follow the end of the entry table. There appears to
+be a requirement that they be aligned to 4-byte boundaries. The values
+are stored starting at the end of the block and grow towards the
+xattr\_header/xattr\_entry table. When the two collide, the overflow is
+put into a separate disk block. If the disk block fills up, the
+filesystem returns -ENOSPC.
+
+The first four fields of the ``ext4_xattr_entry`` are set to zero to
+mark the end of the key list.
+
+Attribute Name Indices
+~~~~~~~~~~~~~~~~~~~~~~
+
+Logically speaking, extended attributes are a series of key=value pairs.
+The keys are assumed to be NULL-terminated strings. To reduce the amount
+of on-disk space that the keys consume, the beginning of the key string
+is matched against the attribute name index. If a match is found, the
+attribute name index field is set, and matching string is removed from
+the key name. Here is a map of name index values to key prefixes:
+
+.. list-table::
+ :widths: 1 79
+ :header-rows: 1
+
+ * - Name Index
+ - Key Prefix
+ * - 0
+ - (no prefix)
+ * - 1
+ - “user.”
+ * - 2
+ - “system.posix\_acl\_access”
+ * - 3
+ - “system.posix\_acl\_default”
+ * - 4
+ - “trusted.”
+ * - 6
+ - “security.”
+ * - 7
+ - “system.” (inline\_data only?)
+ * - 8
+ - “system.richacl” (SuSE kernels only?)
+
+For example, if the attribute key is “user.fubar”, the attribute name
+index is set to 1 and the “fubar” name is recorded on disk.
+
+POSIX ACLs
+~~~~~~~~~~
+
+POSIX ACLs are stored in a reduced version of the Linux kernel (and
+libacl's) internal ACL format. The key difference is that the version
+number is different (1) and the ``e_id`` field is only stored for named
+user and group ACLs.
diff --git a/Documentation/filesystems/ext4/ondisk/bigalloc.rst b/Documentation/filesystems/ext4/ondisk/bigalloc.rst
new file mode 100644
index 000000000000..c6d88557553c
--- /dev/null
+++ b/Documentation/filesystems/ext4/ondisk/bigalloc.rst
@@ -0,0 +1,22 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Bigalloc
+--------
+
+At the moment, the default size of a block is 4KiB, which is a commonly
+supported page size on most MMU-capable hardware. This is fortunate, as
+ext4 code is not prepared to handle the case where the block size
+exceeds the page size. However, for a filesystem of mostly huge files,
+it is desirable to be able to allocate disk blocks in units of multiple
+blocks to reduce both fragmentation and metadata overhead. The
+`bigalloc <Bigalloc>`__ feature provides exactly this ability. The
+administrator can set a block cluster size at mkfs time (which is stored
+in the s\_log\_cluster\_size field in the superblock); from then on, the
+block bitmaps track clusters, not individual blocks. This means that
+block groups can be several gigabytes in size (instead of just 128MiB);
+however, the minimum allocation unit becomes a cluster, not a block,
+even for directories. TaoBao had a patchset to extend the “use units of
+clusters instead of blocks” to the extent tree, though it is not clear
+where those patches went-- they eventually morphed into “extent tree v2”
+but that code has not landed as of May 2015.
+
diff --git a/Documentation/filesystems/ext4/ondisk/bitmaps.rst b/Documentation/filesystems/ext4/ondisk/bitmaps.rst
new file mode 100644
index 000000000000..c7546dbc197a
--- /dev/null
+++ b/Documentation/filesystems/ext4/ondisk/bitmaps.rst
@@ -0,0 +1,28 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Block and inode Bitmaps
+-----------------------
+
+The data block bitmap tracks the usage of data blocks within the block
+group.
+
+The inode bitmap records which entries in the inode table are in use.
+
+As with most bitmaps, one bit represents the usage status of one data
+block or inode table entry. This implies a block group size of 8 \*
+number\_of\_bytes\_in\_a\_logical\_block.
+
+NOTE: If ``BLOCK_UNINIT`` is set for a given block group, various parts
+of the kernel and e2fsprogs code pretends that the block bitmap contains
+zeros (i.e. all blocks in the group are free). However, it is not
+necessarily the case that no blocks are in use -- if ``meta_bg`` is set,
+the bitmaps and group descriptor live inside the group. Unfortunately,
+ext2fs\_test\_block\_bitmap2() will return '0' for those locations,
+which produces confusing debugfs output.
+
+Inode Table
+-----------
+Inode tables are statically allocated at mkfs time. Each block group
+descriptor points to the start of the table, and the superblock records
+the number of inodes per group. See the section on inodes for more
+information.
diff --git a/Documentation/filesystems/ext4/ondisk/blockgroup.rst b/Documentation/filesystems/ext4/ondisk/blockgroup.rst
new file mode 100644
index 000000000000..baf888e4c06a
--- /dev/null
+++ b/Documentation/filesystems/ext4/ondisk/blockgroup.rst
@@ -0,0 +1,135 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Layout
+------
+
+The layout of a standard block group is approximately as follows (each
+of these fields is discussed in a separate section below):
+
+.. list-table::
+ :widths: 1 1 1 1 1 1 1 1
+ :header-rows: 1
+
+ * - Group 0 Padding
+ - ext4 Super Block
+ - Group Descriptors
+ - Reserved GDT Blocks
+ - Data Block Bitmap
+ - inode Bitmap
+ - inode Table
+ - Data Blocks
+ * - 1024 bytes
+ - 1 block
+ - many blocks
+ - many blocks
+ - 1 block
+ - 1 block
+ - many blocks
+ - many more blocks
+
+For the special case of block group 0, the first 1024 bytes are unused,
+to allow for the installation of x86 boot sectors and other oddities.
+The superblock will start at offset 1024 bytes, whichever block that
+happens to be (usually 0). However, if for some reason the block size =
+1024, then block 0 is marked in use and the superblock goes in block 1.
+For all other block groups, there is no padding.
+
+The ext4 driver primarily works with the superblock and the group
+descriptors that are found in block group 0. Redundant copies of the
+superblock and group descriptors are written to some of the block groups
+across the disk in case the beginning of the disk gets trashed, though
+not all block groups necessarily host a redundant copy (see following
+paragraph for more details). If the group does not have a redundant
+copy, the block group begins with the data block bitmap. Note also that
+when the filesystem is freshly formatted, mkfs will allocate “reserve
+GDT block” space after the block group descriptors and before the start
+of the block bitmaps to allow for future expansion of the filesystem. By
+default, a filesystem is allowed to increase in size by a factor of
+1024x over the original filesystem size.
+
+The location of the inode table is given by ``grp.bg_inode_table_*``. It
+is continuous range of blocks large enough to contain
+``sb.s_inodes_per_group * sb.s_inode_size`` bytes.
+
+As for the ordering of items in a block group, it is generally
+established that the super block and the group descriptor table, if
+present, will be at the beginning of the block group. The bitmaps and
+the inode table can be anywhere, and it is quite possible for the
+bitmaps to come after the inode table, or for both to be in different
+groups (flex\_bg). Leftover space is used for file data blocks, indirect
+block maps, extent tree blocks, and extended attributes.
+
+Flexible Block Groups
+---------------------
+
+Starting in ext4, there is a new feature called flexible block groups
+(flex\_bg). In a flex\_bg, several block groups are tied together as one
+logical block group; the bitmap spaces and the inode table space in the
+first block group of the flex\_bg are expanded to include the bitmaps
+and inode tables of all other block groups in the flex\_bg. For example,
+if the flex\_bg size is 4, then group 0 will contain (in order) the
+superblock, group descriptors, data block bitmaps for groups 0-3, inode
+bitmaps for groups 0-3, inode tables for groups 0-3, and the remaining
+space in group 0 is for file data. The effect of this is to group the
+block metadata close together for faster loading, and to enable large
+files to be continuous on disk. Backup copies of the superblock and
+group descriptors are always at the beginning of block groups, even if
+flex\_bg is enabled. The number of block groups that make up a flex\_bg
+is given by 2 ^ ``sb.s_log_groups_per_flex``.
+
+Meta Block Groups
+-----------------
+
+Without the option META\_BG, for safety concerns, all block group
+descriptors copies are kept in the first block group. Given the default
+128MiB(2^27 bytes) block group size and 64-byte group descriptors, ext4
+can have at most 2^27/64 = 2^21 block groups. This limits the entire
+filesystem size to 2^21 ∗ 2^27 = 2^48bytes or 256TiB.
+
+The solution to this problem is to use the metablock group feature
+(META\_BG), which is already in ext3 for all 2.6 releases. With the
+META\_BG feature, ext4 filesystems are partitioned into many metablock
+groups. Each metablock group is a cluster of block groups whose group
+descriptor structures can be stored in a single disk block. For ext4
+filesystems with 4 KB block size, a single metablock group partition
+includes 64 block groups, or 8 GiB of disk space. The metablock group
+feature moves the location of the group descriptors from the congested
+first block group of the whole filesystem into the first group of each
+metablock group itself. The backups are in the second and last group of
+each metablock group. This increases the 2^21 maximum block groups limit
+to the hard limit 2^32, allowing support for a 512PiB filesystem.
+
+The change in the filesystem format replaces the current scheme where
+the superblock is followed by a variable-length set of block group
+descriptors. Instead, the superblock and a single block group descriptor
+block is placed at the beginning of the first, second, and last block
+groups in a meta-block group. A meta-block group is a collection of
+block groups which can be described by a single block group descriptor
+block. Since the size of the block group descriptor structure is 32
+bytes, a meta-block group contains 32 block groups for filesystems with
+a 1KB block size, and 128 block groups for filesystems with a 4KB
+blocksize. Filesystems can either be created using this new block group
+descriptor layout, or existing filesystems can be resized on-line, and
+the field s\_first\_meta\_bg in the superblock will indicate the first
+block group using this new layout.
+
+Please see an important note about ``BLOCK_UNINIT`` in the section about
+block and inode bitmaps.
+
+Lazy Block Group Initialization
+-------------------------------
+
+A new feature for ext4 are three block group descriptor flags that
+enable mkfs to skip initializing other parts of the block group
+metadata. Specifically, the INODE\_UNINIT and BLOCK\_UNINIT flags mean
+that the inode and block bitmaps for that group can be calculated and
+therefore the on-disk bitmap blocks are not initialized. This is
+generally the case for an empty block group or a block group containing
+only fixed-location block group metadata. The INODE\_ZEROED flag means
+that the inode table has been initialized; mkfs will unset this flag and
+rely on the kernel to initialize the inode tables in the background.
+
+By not writing zeroes to the bitmaps and inode table, mkfs time is
+reduced considerably. Note the feature flag is RO\_COMPAT\_GDT\_CSUM,
+but the dumpe2fs output prints this as “uninit\_bg”. They are the same
+thing.
diff --git a/Documentation/filesystems/ext4/ondisk/blockmap.rst b/Documentation/filesystems/ext4/ondisk/blockmap.rst
new file mode 100644
index 000000000000..30e25750d88a
--- /dev/null
+++ b/Documentation/filesystems/ext4/ondisk/blockmap.rst
@@ -0,0 +1,49 @@
+.. SPDX-License-Identifier: GPL-2.0
+
++---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
+| i.i\_block Offset | Where It Points |
++=====================+==============================================================================================================================================================================================================================+
+| 0 to 11 | Direct map to file blocks 0 to 11. |
++---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
+| 12 | Indirect block: (file blocks 12 to (``$block_size`` / 4) + 11, or 12 to 1035 if 4KiB blocks) |
+| | |
+| | +------------------------------+--------------------------------------------------------------------+ |
+| | | Indirect Block Offset | Where It Points | |
+| | +==============================+====================================================================+ |
+| | | 0 to (``$block_size`` / 4) | Direct map to (``$block_size`` / 4) blocks (1024 if 4KiB blocks) | |
+| | +------------------------------+--------------------------------------------------------------------+ |
++---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
+| 13 | Double-indirect block: (file blocks ``$block_size``/4 + 12 to (``$block_size`` / 4) ^ 2 + (``$block_size`` / 4) + 11, or 1036 to 1049611 if 4KiB blocks) |
+| | |
+| | +--------------------------------+---------------------------------------------------------------------------------------------------------+ |
+| | | Double Indirect Block Offset | Where It Points | |
+| | +================================+=========================================================================================================+ |
+| | | 0 to (``$block_size`` / 4) | Map to (``$block_size`` / 4) indirect blocks (1024 if 4KiB blocks) | |
+| | | | | |
+| | | | +------------------------------+--------------------------------------------------------------------+ | |
+| | | | | Indirect Block Offset | Where It Points | | |
+| | | | +==============================+====================================================================+ | |
+| | | | | 0 to (``$block_size`` / 4) | Direct map to (``$block_size`` / 4) blocks (1024 if 4KiB blocks) | | |
+| | | | +------------------------------+--------------------------------------------------------------------+ | |
+| | +--------------------------------+---------------------------------------------------------------------------------------------------------+ |
++---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
+| 14 | Triple-indirect block: (file blocks (``$block_size`` / 4) ^ 2 + (``$block_size`` / 4) + 12 to (``$block_size`` / 4) ^ 3 + (``$block_size`` / 4) ^ 2 + (``$block_size`` / 4) + 12, or 1049612 to 1074791436 if 4KiB blocks) |
+| | |
+| | +--------------------------------+------------------------------------------------------------------------------------------------------------------------------------------------+ |
+| | | Triple Indirect Block Offset | Where It Points | |
+| | +================================+================================================================================================================================================+ |
+| | | 0 to (``$block_size`` / 4) | Map to (``$block_size`` / 4) double indirect blocks (1024 if 4KiB blocks) | |
+| | | | | |
+| | | | +--------------------------------+---------------------------------------------------------------------------------------------------------+ | |
+| | | | | Double Indirect Block Offset | Where It Points | | |
+| | | | +================================+=========================================================================================================+ | |
+| | | | | 0 to (``$block_size`` / 4) | Map to (``$block_size`` / 4) indirect blocks (1024 if 4KiB blocks) | | |
+| | | | | | | | |
+| | | | | | +------------------------------+--------------------------------------------------------------------+ | | |
+| | | | | | | Indirect Block Offset | Where It Points | | | |
+| | | | | | +==============================+====================================================================+ | | |
+| | | | | | | 0 to (``$block_size`` / 4) | Direct map to (``$block_size`` / 4) blocks (1024 if 4KiB blocks) | | | |
+| | | | | | +------------------------------+--------------------------------------------------------------------+ | | |
+| | | | +--------------------------------+---------------------------------------------------------------------------------------------------------+ | |
+| | +--------------------------------+------------------------------------------------------------------------------------------------------------------------------------------------+ |
++---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
diff --git a/Documentation/filesystems/ext4/ondisk/blocks.rst b/Documentation/filesystems/ext4/ondisk/blocks.rst
new file mode 100644
index 000000000000..73d4dc0f7bda
--- /dev/null
+++ b/Documentation/filesystems/ext4/ondisk/blocks.rst
@@ -0,0 +1,142 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Blocks
+------
+
+ext4 allocates storage space in units of “blocks”. A block is a group of
+sectors between 1KiB and 64KiB, and the number of sectors must be an
+integral power of 2. Blocks are in turn grouped into larger units called
+block groups. Block size is specified at mkfs time and typically is
+4KiB. You may experience mounting problems if block size is greater than
+page size (i.e. 64KiB blocks on a i386 which only has 4KiB memory
+pages). By default a filesystem can contain 2^32 blocks; if the '64bit'
+feature is enabled, then a filesystem can have 2^64 blocks.
+
+For 32-bit filesystems, limits are as follows:
+
+.. list-table::
+ :widths: 1 1 1 1 1
+ :header-rows: 1
+
+ * - Item
+ - 1KiB
+ - 2KiB
+ - 4KiB
+ - 64KiB
+ * - Blocks
+ - 2^32
+ - 2^32
+ - 2^32
+ - 2^32
+ * - Inodes
+ - 2^32
+ - 2^32
+ - 2^32
+ - 2^32
+ * - File System Size
+ - 4TiB
+ - 8TiB
+ - 16TiB
+ - 256PiB
+ * - Blocks Per Block Group
+ - 8,192
+ - 16,384
+ - 32,768
+ - 524,288
+ * - Inodes Per Block Group
+ - 8,192
+ - 16,384
+ - 32,768
+ - 524,288
+ * - Block Group Size
+ - 8MiB
+ - 32MiB
+ - 128MiB
+ - 32GiB
+ * - Blocks Per File, Extents
+ - 2^32
+ - 2^32
+ - 2^32
+ - 2^32
+ * - Blocks Per File, Block Maps
+ - 16,843,020
+ - 134,480,396
+ - 1,074,791,436
+ - 4,398,314,962,956 (really 2^32 due to field size limitations)
+ * - File Size, Extents
+ - 4TiB
+ - 8TiB
+ - 16TiB
+ - 256TiB
+ * - File Size, Block Maps
+ - 16GiB
+ - 256GiB
+ - 4TiB
+ - 256TiB
+
+For 64-bit filesystems, limits are as follows:
+
+.. list-table::
+ :widths: 1 1 1 1 1
+ :header-rows: 1
+
+ * - Item
+ - 1KiB
+ - 2KiB
+ - 4KiB
+ - 64KiB
+ * - Blocks
+ - 2^64
+ - 2^64
+ - 2^64
+ - 2^64
+ * - Inodes
+ - 2^32
+ - 2^32
+ - 2^32
+ - 2^32
+ * - File System Size
+ - 16ZiB
+ - 32ZiB
+ - 64ZiB
+ - 1YiB
+ * - Blocks Per Block Group
+ - 8,192
+ - 16,384
+ - 32,768
+ - 524,288
+ * - Inodes Per Block Group
+ - 8,192
+ - 16,384
+ - 32,768
+ - 524,288
+ * - Block Group Size
+ - 8MiB
+ - 32MiB
+ - 128MiB
+ - 32GiB
+ * - Blocks Per File, Extents
+ - 2^32
+ - 2^32
+ - 2^32
+ - 2^32
+ * - Blocks Per File, Block Maps
+ - 16,843,020
+ - 134,480,396
+ - 1,074,791,436
+ - 4,398,314,962,956 (really 2^32 due to field size limitations)
+ * - File Size, Extents
+ - 4TiB
+ - 8TiB
+ - 16TiB
+ - 256TiB
+ * - File Size, Block Maps
+ - 16GiB
+ - 256GiB
+ - 4TiB
+ - 256TiB
+
+Note: Files not using extents (i.e. files using block maps) must be
+placed within the first 2^32 blocks of a filesystem. Files with extents
+must be placed within the first 2^48 blocks of a filesystem. It's not
+clear what happens with larger filesystems.
diff --git a/Documentation/filesystems/ext4/ondisk/checksums.rst b/Documentation/filesystems/ext4/ondisk/checksums.rst
new file mode 100644
index 000000000000..9d6a793b2e03
--- /dev/null
+++ b/Documentation/filesystems/ext4/ondisk/checksums.rst
@@ -0,0 +1,73 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Checksums
+---------
+
+Starting in early 2012, metadata checksums were added to all major ext4
+and jbd2 data structures. The associated feature flag is metadata\_csum.
+The desired checksum algorithm is indicated in the superblock, though as
+of October 2012 the only supported algorithm is crc32c. Some data
+structures did not have space to fit a full 32-bit checksum, so only the
+lower 16 bits are stored. Enabling the 64bit feature increases the data
+structure size so that full 32-bit checksums can be stored for many data
+structures. However, existing 32-bit filesystems cannot be extended to
+enable 64bit mode, at least not without the experimental resize2fs
+patches to do so.
+
+Existing filesystems can have checksumming added by running
+``tune2fs -O metadata_csum`` against the underlying device. If tune2fs
+encounters directory blocks that lack sufficient empty space to add a
+checksum, it will request that you run ``e2fsck -D`` to have the
+directories rebuilt with checksums. This has the added benefit of
+removing slack space from the directory files and rebalancing the htree
+indexes. If you \_ignore\_ this step, your directories will not be
+protected by a checksum!
+
+The following table describes the data elements that go into each type
+of checksum. The checksum function is whatever the superblock describes
+(crc32c as of October 2013) unless noted otherwise.
+
+.. list-table::
+ :widths: 1 1 4
+ :header-rows: 1
+
+ * - Metadata
+ - Length
+ - Ingredients
+ * - Superblock
+ - \_\_le32
+ - The entire superblock up to the checksum field. The UUID lives inside
+ the superblock.
+ * - MMP
+ - \_\_le32
+ - UUID + the entire MMP block up to the checksum field.
+ * - Extended Attributes
+ - \_\_le32
+ - UUID + the entire extended attribute block. The checksum field is set to
+ zero.
+ * - Directory Entries
+ - \_\_le32
+ - UUID + inode number + inode generation + the directory block up to the
+ fake entry enclosing the checksum field.
+ * - HTREE Nodes
+ - \_\_le32
+ - UUID + inode number + inode generation + all valid extents + HTREE tail.
+ The checksum field is set to zero.
+ * - Extents
+ - \_\_le32
+ - UUID + inode number + inode generation + the entire extent block up to
+ the checksum field.
+ * - Bitmaps
+ - \_\_le32 or \_\_le16
+ - UUID + the entire bitmap. Checksums are stored in the group descriptor,
+ and truncated if the group descriptor size is 32 bytes (i.e. ^64bit)
+ * - Inodes
+ - \_\_le32
+ - UUID + inode number + inode generation + the entire inode. The checksum
+ field is set to zero. Each inode has its own checksum.
+ * - Group Descriptors
+ - \_\_le16
+ - If metadata\_csum, then UUID + group number + the entire descriptor;
+ else if gdt\_csum, then crc16(UUID + group number + the entire
+ descriptor). In all cases, only the lower 16 bits are stored.
+
diff --git a/Documentation/filesystems/ext4/ondisk/directory.rst b/Documentation/filesystems/ext4/ondisk/directory.rst
new file mode 100644
index 000000000000..8fcba68c2884
--- /dev/null
+++ b/Documentation/filesystems/ext4/ondisk/directory.rst
@@ -0,0 +1,426 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Directory Entries
+-----------------
+
+In an ext4 filesystem, a directory is more or less a flat file that maps
+an arbitrary byte string (usually ASCII) to an inode number on the
+filesystem. There can be many directory entries across the filesystem
+that reference the same inode number--these are known as hard links, and
+that is why hard links cannot reference files on other filesystems. As
+such, directory entries are found by reading the data block(s)
+associated with a directory file for the particular directory entry that
+is desired.
+
+Linear (Classic) Directories
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+By default, each directory lists its entries in an “almost-linear”
+array. I write “almost” because it's not a linear array in the memory
+sense because directory entries are not split across filesystem blocks.
+Therefore, it is more accurate to say that a directory is a series of
+data blocks and that each block contains a linear array of directory
+entries. The end of each per-block array is signified by reaching the
+end of the block; the last entry in the block has a record length that
+takes it all the way to the end of the block. The end of the entire
+directory is of course signified by reaching the end of the file. Unused
+directory entries are signified by inode = 0. By default the filesystem
+uses ``struct ext4_dir_entry_2`` for directory entries unless the
+“filetype” feature flag is not set, in which case it uses
+``struct ext4_dir_entry``.
+
+The original directory entry format is ``struct ext4_dir_entry``, which
+is at most 263 bytes long, though on disk you'll need to reference
+``dirent.rec_len`` to know for sure.
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Size
+ - Name
+ - Description
+ * - 0x0
+ - \_\_le32
+ - inode
+ - Number of the inode that this directory entry points to.
+ * - 0x4
+ - \_\_le16
+ - rec\_len
+ - Length of this directory entry. Must be a multiple of 4.
+ * - 0x6
+ - \_\_le16
+ - name\_len
+ - Length of the file name.
+ * - 0x8
+ - char
+ - name[EXT4\_NAME\_LEN]
+ - File name.
+
+Since file names cannot be longer than 255 bytes, the new directory
+entry format shortens the rec\_len field and uses the space for a file
+type flag, probably to avoid having to load every inode during directory
+tree traversal. This format is ``ext4_dir_entry_2``, which is at most
+263 bytes long, though on disk you'll need to reference
+``dirent.rec_len`` to know for sure.
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Size
+ - Name
+ - Description
+ * - 0x0
+ - \_\_le32
+ - inode
+ - Number of the inode that this directory entry points to.
+ * - 0x4
+ - \_\_le16
+ - rec\_len
+ - Length of this directory entry.
+ * - 0x6
+ - \_\_u8
+ - name\_len
+ - Length of the file name.
+ * - 0x7
+ - \_\_u8
+ - file\_type
+ - File type code, see ftype_ table below.
+ * - 0x8
+ - char
+ - name[EXT4\_NAME\_LEN]
+ - File name.
+
+.. _ftype:
+
+The directory file type is one of the following values:
+
+.. list-table::
+ :widths: 1 79
+ :header-rows: 1
+
+ * - Value
+ - Description
+ * - 0x0
+ - Unknown.
+ * - 0x1
+ - Regular file.
+ * - 0x2
+ - Directory.
+ * - 0x3
+ - Character device file.
+ * - 0x4
+ - Block device file.
+ * - 0x5
+ - FIFO.
+ * - 0x6
+ - Socket.
+ * - 0x7
+ - Symbolic link.
+
+In order to add checksums to these classic directory blocks, a phony
+``struct ext4_dir_entry`` is placed at the end of each leaf block to
+hold the checksum. The directory entry is 12 bytes long. The inode
+number and name\_len fields are set to zero to fool old software into
+ignoring an apparently empty directory entry, and the checksum is stored
+in the place where the name normally goes. The structure is
+``struct ext4_dir_entry_tail``:
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Size
+ - Name
+ - Description
+ * - 0x0
+ - \_\_le32
+ - det\_reserved\_zero1
+ - Inode number, which must be zero.
+ * - 0x4
+ - \_\_le16
+ - det\_rec\_len
+ - Length of this directory entry, which must be 12.
+ * - 0x6
+ - \_\_u8
+ - det\_reserved\_zero2
+ - Length of the file name, which must be zero.
+ * - 0x7
+ - \_\_u8
+ - det\_reserved\_ft
+ - File type, which must be 0xDE.
+ * - 0x8
+ - \_\_le32
+ - det\_checksum
+ - Directory leaf block checksum.
+
+The leaf directory block checksum is calculated against the FS UUID, the
+directory's inode number, the directory's inode generation number, and
+the entire directory entry block up to (but not including) the fake
+directory entry.
+
+Hash Tree Directories
+~~~~~~~~~~~~~~~~~~~~~
+
+A linear array of directory entries isn't great for performance, so a
+new feature was added to ext3 to provide a faster (but peculiar)
+balanced tree keyed off a hash of the directory entry name. If the
+EXT4\_INDEX\_FL (0x1000) flag is set in the inode, this directory uses a
+hashed btree (htree) to organize and find directory entries. For
+backwards read-only compatibility with ext2, this tree is actually
+hidden inside the directory file, masquerading as “empty” directory data
+blocks! It was stated previously that the end of the linear directory
+entry table was signified with an entry pointing to inode 0; this is
+(ab)used to fool the old linear-scan algorithm into thinking that the
+rest of the directory block is empty so that it moves on.
+
+The root of the tree always lives in the first data block of the
+directory. By ext2 custom, the '.' and '..' entries must appear at the
+beginning of this first block, so they are put here as two
+``struct ext4_dir_entry_2``\ s and not stored in the tree. The rest of
+the root node contains metadata about the tree and finally a hash->block
+map to find nodes that are lower in the htree. If
+``dx_root.info.indirect_levels`` is non-zero then the htree has two
+levels; the data block pointed to by the root node's map is an interior
+node, which is indexed by a minor hash. Interior nodes in this tree
+contains a zeroed out ``struct ext4_dir_entry_2`` followed by a
+minor\_hash->block map to find leafe nodes. Leaf nodes contain a linear
+array of all ``struct ext4_dir_entry_2``; all of these entries
+(presumably) hash to the same value. If there is an overflow, the
+entries simply overflow into the next leaf node, and the
+least-significant bit of the hash (in the interior node map) that gets
+us to this next leaf node is set.
+
+To traverse the directory as a htree, the code calculates the hash of
+the desired file name and uses it to find the corresponding block
+number. If the tree is flat, the block is a linear array of directory
+entries that can be searched; otherwise, the minor hash of the file name
+is computed and used against this second block to find the corresponding
+third block number. That third block number will be a linear array of
+directory entries.
+
+To traverse the directory as a linear array (such as the old code does),
+the code simply reads every data block in the directory. The blocks used
+for the htree will appear to have no entries (aside from '.' and '..')
+and so only the leaf nodes will appear to have any interesting content.
+
+The root of the htree is in ``struct dx_root``, which is the full length
+of a data block:
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Type
+ - Name
+ - Description
+ * - 0x0
+ - \_\_le32
+ - dot.inode
+ - inode number of this directory.
+ * - 0x4
+ - \_\_le16
+ - dot.rec\_len
+ - Length of this record, 12.
+ * - 0x6
+ - u8
+ - dot.name\_len
+ - Length of the name, 1.
+ * - 0x7
+ - u8
+ - dot.file\_type
+ - File type of this entry, 0x2 (directory) (if the feature flag is set).
+ * - 0x8
+ - char
+ - dot.name[4]
+ - “.\\0\\0\\0”
+ * - 0xC
+ - \_\_le32
+ - dotdot.inode
+ - inode number of parent directory.
+ * - 0x10
+ - \_\_le16
+ - dotdot.rec\_len
+ - block\_size - 12. The record length is long enough to cover all htree
+ data.
+ * - 0x12
+ - u8
+ - dotdot.name\_len
+ - Length of the name, 2.
+ * - 0x13
+ - u8
+ - dotdot.file\_type
+ - File type of this entry, 0x2 (directory) (if the feature flag is set).
+ * - 0x14
+ - char
+ - dotdot\_name[4]
+ - “..\\0\\0”
+ * - 0x18
+ - \_\_le32
+ - struct dx\_root\_info.reserved\_zero
+ - Zero.
+ * - 0x1C
+ - u8
+ - struct dx\_root\_info.hash\_version
+ - Hash type, see dirhash_ table below.
+ * - 0x1D
+ - u8
+ - struct dx\_root\_info.info\_length
+ - Length of the tree information, 0x8.
+ * - 0x1E
+ - u8
+ - struct dx\_root\_info.indirect\_levels
+ - Depth of the htree. Cannot be larger than 3 if the INCOMPAT\_LARGEDIR
+ feature is set; cannot be larger than 2 otherwise.
+ * - 0x1F
+ - u8
+ - struct dx\_root\_info.unused\_flags
+ -
+ * - 0x20
+ - \_\_le16
+ - limit
+ - Maximum number of dx\_entries that can follow this header, plus 1 for
+ the header itself.
+ * - 0x22
+ - \_\_le16
+ - count
+ - Actual number of dx\_entries that follow this header, plus 1 for the
+ header itself.
+ * - 0x24
+ - \_\_le32
+ - block
+ - The block number (within the directory file) that goes with hash=0.
+ * - 0x28
+ - struct dx\_entry
+ - entries[0]
+ - As many 8-byte ``struct dx_entry`` as fits in the rest of the data block.
+
+.. _dirhash:
+
+The directory hash is one of the following values:
+
+.. list-table::
+ :widths: 1 79
+ :header-rows: 1
+
+ * - Value
+ - Description
+ * - 0x0
+ - Legacy.
+ * - 0x1
+ - Half MD4.
+ * - 0x2
+ - Tea.
+ * - 0x3
+ - Legacy, unsigned.
+ * - 0x4
+ - Half MD4, unsigned.
+ * - 0x5
+ - Tea, unsigned.
+
+Interior nodes of an htree are recorded as ``struct dx_node``, which is
+also the full length of a data block:
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Type
+ - Name
+ - Description
+ * - 0x0
+ - \_\_le32
+ - fake.inode
+ - Zero, to make it look like this entry is not in use.
+ * - 0x4
+ - \_\_le16
+ - fake.rec\_len
+ - The size of the block, in order to hide all of the dx\_node data.
+ * - 0x6
+ - u8
+ - name\_len
+ - Zero. There is no name for this “unused” directory entry.
+ * - 0x7
+ - u8
+ - file\_type
+ - Zero. There is no file type for this “unused” directory entry.
+ * - 0x8
+ - \_\_le16
+ - limit
+ - Maximum number of dx\_entries that can follow this header, plus 1 for
+ the header itself.
+ * - 0xA
+ - \_\_le16
+ - count
+ - Actual number of dx\_entries that follow this header, plus 1 for the
+ header itself.
+ * - 0xE
+ - \_\_le32
+ - block
+ - The block number (within the directory file) that goes with the lowest
+ hash value of this block. This value is stored in the parent block.
+ * - 0x12
+ - struct dx\_entry
+ - entries[0]
+ - As many 8-byte ``struct dx_entry`` as fits in the rest of the data block.
+
+The hash maps that exist in both ``struct dx_root`` and
+``struct dx_node`` are recorded as ``struct dx_entry``, which is 8 bytes
+long:
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Type
+ - Name
+ - Description
+ * - 0x0
+ - \_\_le32
+ - hash
+ - Hash code.
+ * - 0x4
+ - \_\_le32
+ - block
+ - Block number (within the directory file, not filesystem blocks) of the
+ next node in the htree.
+
+(If you think this is all quite clever and peculiar, so does the
+author.)
+
+If metadata checksums are enabled, the last 8 bytes of the directory
+block (precisely the length of one dx\_entry) are used to store a
+``struct dx_tail``, which contains the checksum. The ``limit`` and
+``count`` entries in the dx\_root/dx\_node structures are adjusted as
+necessary to fit the dx\_tail into the block. If there is no space for
+the dx\_tail, the user is notified to run e2fsck -D to rebuild the
+directory index (which will ensure that there's space for the checksum.
+The dx\_tail structure is 8 bytes long and looks like this:
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Type
+ - Name
+ - Description
+ * - 0x0
+ - u32
+ - dt\_reserved
+ - Zero.
+ * - 0x4
+ - \_\_le32
+ - dt\_checksum
+ - Checksum of the htree directory block.
+
+The checksum is calculated against the FS UUID, the htree index header
+(dx\_root or dx\_node), all of the htree indices (dx\_entry) that are in
+use, and the tail block (dx\_tail).
diff --git a/Documentation/filesystems/ext4/ondisk/dynamic.rst b/Documentation/filesystems/ext4/ondisk/dynamic.rst
new file mode 100644
index 000000000000..bb0c84333341
--- /dev/null
+++ b/Documentation/filesystems/ext4/ondisk/dynamic.rst
@@ -0,0 +1,12 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Dynamic Structures
+==================
+
+Dynamic metadata are created on the fly when files and blocks are
+allocated to files.
+
+.. include:: inodes.rst
+.. include:: ifork.rst
+.. include:: directory.rst
+.. include:: attributes.rst
diff --git a/Documentation/filesystems/ext4/ondisk/eainode.rst b/Documentation/filesystems/ext4/ondisk/eainode.rst
new file mode 100644
index 000000000000..ecc0d01a0a72
--- /dev/null
+++ b/Documentation/filesystems/ext4/ondisk/eainode.rst
@@ -0,0 +1,18 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Large Extended Attribute Values
+-------------------------------
+
+To enable ext4 to store extended attribute values that do not fit in the
+inode or in the single extended attribute block attached to an inode,
+the EA\_INODE feature allows us to store the value in the data blocks of
+a regular file inode. This “EA inode” is linked only from the extended
+attribute name index and must not appear in a directory entry. The
+inode's i\_atime field is used to store a checksum of the xattr value;
+and i\_ctime/i\_version store a 64-bit reference count, which enables
+sharing of large xattr values between multiple owning inodes. For
+backward compatibility with older versions of this feature, the
+i\_mtime/i\_generation *may* store a back-reference to the inode number
+and i\_generation of the **one** owning inode (in cases where the EA
+inode is not referenced by multiple inodes) to verify that the EA inode
+is the correct one being accessed.
diff --git a/Documentation/filesystems/ext4/ondisk/globals.rst b/Documentation/filesystems/ext4/ondisk/globals.rst
new file mode 100644
index 000000000000..368bf7662b96
--- /dev/null
+++ b/Documentation/filesystems/ext4/ondisk/globals.rst
@@ -0,0 +1,13 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Global Structures
+=================
+
+The filesystem is sharded into a number of block groups, each of which
+have static metadata at fixed locations.
+
+.. include:: super.rst
+.. include:: group_descr.rst
+.. include:: bitmaps.rst
+.. include:: mmp.rst
+.. include:: journal.rst
diff --git a/Documentation/filesystems/ext4/ondisk/group_descr.rst b/Documentation/filesystems/ext4/ondisk/group_descr.rst
new file mode 100644
index 000000000000..759827e5d2cf
--- /dev/null
+++ b/Documentation/filesystems/ext4/ondisk/group_descr.rst
@@ -0,0 +1,170 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Block Group Descriptors
+-----------------------
+
+Each block group on the filesystem has one of these descriptors
+associated with it. As noted in the Layout section above, the group
+descriptors (if present) are the second item in the block group. The
+standard configuration is for each block group to contain a full copy of
+the block group descriptor table unless the sparse\_super feature flag
+is set.
+
+Notice how the group descriptor records the location of both bitmaps and
+the inode table (i.e. they can float). This means that within a block
+group, the only data structures with fixed locations are the superblock
+and the group descriptor table. The flex\_bg mechanism uses this
+property to group several block groups into a flex group and lay out all
+of the groups' bitmaps and inode tables into one long run in the first
+group of the flex group.
+
+If the meta\_bg feature flag is set, then several block groups are
+grouped together into a meta group. Note that in the meta\_bg case,
+however, the first and last two block groups within the larger meta
+group contain only group descriptors for the groups inside the meta
+group.
+
+flex\_bg and meta\_bg do not appear to be mutually exclusive features.
+
+In ext2, ext3, and ext4 (when the 64bit feature is not enabled), the
+block group descriptor was only 32 bytes long and therefore ends at
+bg\_checksum. On an ext4 filesystem with the 64bit feature enabled, the
+block group descriptor expands to at least the 64 bytes described below;
+the size is stored in the superblock.
+
+If gdt\_csum is set and metadata\_csum is not set, the block group
+checksum is the crc16 of the FS UUID, the group number, and the group
+descriptor structure. If metadata\_csum is set, then the block group
+checksum is the lower 16 bits of the checksum of the FS UUID, the group
+number, and the group descriptor structure. Both block and inode bitmap
+checksums are calculated against the FS UUID, the group number, and the
+entire bitmap.
+
+The block group descriptor is laid out in ``struct ext4_group_desc``.
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Size
+ - Name
+ - Description
+ * - 0x0
+ - \_\_le32
+ - bg\_block\_bitmap\_lo
+ - Lower 32-bits of location of block bitmap.
+ * - 0x4
+ - \_\_le32
+ - bg\_inode\_bitmap\_lo
+ - Lower 32-bits of location of inode bitmap.
+ * - 0x8
+ - \_\_le32
+ - bg\_inode\_table\_lo
+ - Lower 32-bits of location of inode table.
+ * - 0xC
+ - \_\_le16
+ - bg\_free\_blocks\_count\_lo
+ - Lower 16-bits of free block count.
+ * - 0xE
+ - \_\_le16
+ - bg\_free\_inodes\_count\_lo
+ - Lower 16-bits of free inode count.
+ * - 0x10
+ - \_\_le16
+ - bg\_used\_dirs\_count\_lo
+ - Lower 16-bits of directory count.
+ * - 0x12
+ - \_\_le16
+ - bg\_flags
+ - Block group flags. See the bgflags_ table below.
+ * - 0x14
+ - \_\_le32
+ - bg\_exclude\_bitmap\_lo
+ - Lower 32-bits of location of snapshot exclusion bitmap.
+ * - 0x18
+ - \_\_le16
+ - bg\_block\_bitmap\_csum\_lo
+ - Lower 16-bits of the block bitmap checksum.
+ * - 0x1A
+ - \_\_le16
+ - bg\_inode\_bitmap\_csum\_lo
+ - Lower 16-bits of the inode bitmap checksum.
+ * - 0x1C
+ - \_\_le16
+ - bg\_itable\_unused\_lo
+ - Lower 16-bits of unused inode count. If set, we needn't scan past the
+ ``(sb.s_inodes_per_group - gdt.bg_itable_unused)``\ th entry in the
+ inode table for this group.
+ * - 0x1E
+ - \_\_le16
+ - bg\_checksum
+ - Group descriptor checksum; crc16(sb\_uuid+group+desc) if the
+ RO\_COMPAT\_GDT\_CSUM feature is set, or crc32c(sb\_uuid+group\_desc) &
+ 0xFFFF if the RO\_COMPAT\_METADATA\_CSUM feature is set.
+ * -
+ -
+ -
+ - These fields only exist if the 64bit feature is enabled and s_desc_size
+ > 32.
+ * - 0x20
+ - \_\_le32
+ - bg\_block\_bitmap\_hi
+ - Upper 32-bits of location of block bitmap.
+ * - 0x24
+ - \_\_le32
+ - bg\_inode\_bitmap\_hi
+ - Upper 32-bits of location of inodes bitmap.
+ * - 0x28
+ - \_\_le32
+ - bg\_inode\_table\_hi
+ - Upper 32-bits of location of inodes table.
+ * - 0x2C
+ - \_\_le16
+ - bg\_free\_blocks\_count\_hi
+ - Upper 16-bits of free block count.
+ * - 0x2E
+ - \_\_le16
+ - bg\_free\_inodes\_count\_hi
+ - Upper 16-bits of free inode count.
+ * - 0x30
+ - \_\_le16
+ - bg\_used\_dirs\_count\_hi
+ - Upper 16-bits of directory count.
+ * - 0x32
+ - \_\_le16
+ - bg\_itable\_unused\_hi
+ - Upper 16-bits of unused inode count.
+ * - 0x34
+ - \_\_le32
+ - bg\_exclude\_bitmap\_hi
+ - Upper 32-bits of location of snapshot exclusion bitmap.
+ * - 0x38
+ - \_\_le16
+ - bg\_block\_bitmap\_csum\_hi
+ - Upper 16-bits of the block bitmap checksum.
+ * - 0x3A
+ - \_\_le16
+ - bg\_inode\_bitmap\_csum\_hi
+ - Upper 16-bits of the inode bitmap checksum.
+ * - 0x3C
+ - \_\_u32
+ - bg\_reserved
+ - Padding to 64 bytes.
+
+.. _bgflags:
+
+Block group flags can be any combination of the following:
+
+.. list-table::
+ :widths: 1 79
+ :header-rows: 1
+
+ * - Value
+ - Description
+ * - 0x1
+ - inode table and bitmap are not initialized (EXT4\_BG\_INODE\_UNINIT).
+ * - 0x2
+ - block bitmap is not initialized (EXT4\_BG\_BLOCK\_UNINIT).
+ * - 0x4
+ - inode table is zeroed (EXT4\_BG\_INODE\_ZEROED).
diff --git a/Documentation/filesystems/ext4/ondisk/ifork.rst b/Documentation/filesystems/ext4/ondisk/ifork.rst
new file mode 100644
index 000000000000..5dbe3b2b121a
--- /dev/null
+++ b/Documentation/filesystems/ext4/ondisk/ifork.rst
@@ -0,0 +1,194 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The Contents of inode.i\_block
+------------------------------
+
+Depending on the type of file an inode describes, the 60 bytes of
+storage in ``inode.i_block`` can be used in different ways. In general,
+regular files and directories will use it for file block indexing
+information, and special files will use it for special purposes.
+
+Symbolic Links
+~~~~~~~~~~~~~~
+
+The target of a symbolic link will be stored in this field if the target
+string is less than 60 bytes long. Otherwise, either extents or block
+maps will be used to allocate data blocks to store the link target.
+
+Direct/Indirect Block Addressing
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+In ext2/3, file block numbers were mapped to logical block numbers by
+means of an (up to) three level 1-1 block map. To find the logical block
+that stores a particular file block, the code would navigate through
+this increasingly complicated structure. Notice that there is neither a
+magic number nor a checksum to provide any level of confidence that the
+block isn't full of garbage.
+
+.. ifconfig:: builder != 'latex'
+
+ .. include:: blockmap.rst
+
+.. ifconfig:: builder == 'latex'
+
+ [Table omitted because LaTeX doesn't support nested tables.]
+
+Note that with this block mapping scheme, it is necessary to fill out a
+lot of mapping data even for a large contiguous file! This inefficiency
+led to the creation of the extent mapping scheme, discussed below.
+
+Notice also that a file using this mapping scheme cannot be placed
+higher than 2^32 blocks.
+
+Extent Tree
+~~~~~~~~~~~
+
+In ext4, the file to logical block map has been replaced with an extent
+tree. Under the old scheme, allocating a contiguous run of 1,000 blocks
+requires an indirect block to map all 1,000 entries; with extents, the
+mapping is reduced to a single ``struct ext4_extent`` with
+``ee_len = 1000``. If flex\_bg is enabled, it is possible to allocate
+very large files with a single extent, at a considerable reduction in
+metadata block use, and some improvement in disk efficiency. The inode
+must have the extents flag (0x80000) flag set for this feature to be in
+use.
+
+Extents are arranged as a tree. Each node of the tree begins with a
+``struct ext4_extent_header``. If the node is an interior node
+(``eh.eh_depth`` > 0), the header is followed by ``eh.eh_entries``
+instances of ``struct ext4_extent_idx``; each of these index entries
+points to a block containing more nodes in the extent tree. If the node
+is a leaf node (``eh.eh_depth == 0``), then the header is followed by
+``eh.eh_entries`` instances of ``struct ext4_extent``; these instances
+point to the file's data blocks. The root node of the extent tree is
+stored in ``inode.i_block``, which allows for the first four extents to
+be recorded without the use of extra metadata blocks.
+
+The extent tree header is recorded in ``struct ext4_extent_header``,
+which is 12 bytes long:
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Size
+ - Name
+ - Description
+ * - 0x0
+ - \_\_le16
+ - eh\_magic
+ - Magic number, 0xF30A.
+ * - 0x2
+ - \_\_le16
+ - eh\_entries
+ - Number of valid entries following the header.
+ * - 0x4
+ - \_\_le16
+ - eh\_max
+ - Maximum number of entries that could follow the header.
+ * - 0x6
+ - \_\_le16
+ - eh\_depth
+ - Depth of this extent node in the extent tree. 0 = this extent node
+ points to data blocks; otherwise, this extent node points to other
+ extent nodes. The extent tree can be at most 5 levels deep: a logical
+ block number can be at most ``2^32``, and the smallest ``n`` that
+ satisfies ``4*(((blocksize - 12)/12)^n) >= 2^32`` is 5.
+ * - 0x8
+ - \_\_le32
+ - eh\_generation
+ - Generation of the tree. (Used by Lustre, but not standard ext4).
+
+Internal nodes of the extent tree, also known as index nodes, are
+recorded as ``struct ext4_extent_idx``, and are 12 bytes long:
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Size
+ - Name
+ - Description
+ * - 0x0
+ - \_\_le32
+ - ei\_block
+ - This index node covers file blocks from 'block' onward.
+ * - 0x4
+ - \_\_le32
+ - ei\_leaf\_lo
+ - Lower 32-bits of the block number of the extent node that is the next
+ level lower in the tree. The tree node pointed to can be either another
+ internal node or a leaf node, described below.
+ * - 0x8
+ - \_\_le16
+ - ei\_leaf\_hi
+ - Upper 16-bits of the previous field.
+ * - 0xA
+ - \_\_u16
+ - ei\_unused
+ -
+
+Leaf nodes of the extent tree are recorded as ``struct ext4_extent``,
+and are also 12 bytes long:
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Size
+ - Name
+ - Description
+ * - 0x0
+ - \_\_le32
+ - ee\_block
+ - First file block number that this extent covers.
+ * - 0x4
+ - \_\_le16
+ - ee\_len
+ - Number of blocks covered by extent. If the value of this field is <=
+ 32768, the extent is initialized. If the value of the field is > 32768,
+ the extent is uninitialized and the actual extent length is ``ee_len`` -
+ 32768. Therefore, the maximum length of a initialized extent is 32768
+ blocks, and the maximum length of an uninitialized extent is 32767.
+ * - 0x6
+ - \_\_le16
+ - ee\_start\_hi
+ - Upper 16-bits of the block number to which this extent points.
+ * - 0x8
+ - \_\_le32
+ - ee\_start\_lo
+ - Lower 32-bits of the block number to which this extent points.
+
+Prior to the introduction of metadata checksums, the extent header +
+extent entries always left at least 4 bytes of unallocated space at the
+end of each extent tree data block (because (2^x % 12) >= 4). Therefore,
+the 32-bit checksum is inserted into this space. The 4 extents in the
+inode do not need checksumming, since the inode is already checksummed.
+The checksum is calculated against the FS UUID, the inode number, the
+inode generation, and the entire extent block leading up to (but not
+including) the checksum itself.
+
+``struct ext4_extent_tail`` is 4 bytes long:
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Size
+ - Name
+ - Description
+ * - 0x0
+ - \_\_le32
+ - eb\_checksum
+ - Checksum of the extent block, crc32c(uuid+inum+igeneration+extentblock)
+
+Inline Data
+~~~~~~~~~~~
+
+If the inline data feature is enabled for the filesystem and the flag is
+set for the inode, it is possible that the first 60 bytes of the file
+data are stored here.
diff --git a/Documentation/filesystems/ext4/ondisk/index.rst b/Documentation/filesystems/ext4/ondisk/index.rst
new file mode 100644
index 000000000000..f7d082c3a435
--- /dev/null
+++ b/Documentation/filesystems/ext4/ondisk/index.rst
@@ -0,0 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==============================
+Data Structures and Algorithms
+==============================
+.. include:: about.rst
+.. include:: overview.rst
+.. include:: globals.rst
+.. include:: dynamic.rst
diff --git a/Documentation/filesystems/ext4/ondisk/inlinedata.rst b/Documentation/filesystems/ext4/ondisk/inlinedata.rst
new file mode 100644
index 000000000000..d1075178ce0b
--- /dev/null
+++ b/Documentation/filesystems/ext4/ondisk/inlinedata.rst
@@ -0,0 +1,37 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Inline Data
+-----------
+
+The inline data feature was designed to handle the case that a file's
+data is so tiny that it readily fits inside the inode, which
+(theoretically) reduces disk block consumption and reduces seeks. If the
+file is smaller than 60 bytes, then the data are stored inline in
+``inode.i_block``. If the rest of the file would fit inside the extended
+attribute space, then it might be found as an extended attribute
+“system.data” within the inode body (“ibody EA”). This of course
+constrains the amount of extended attributes one can attach to an inode.
+If the data size increases beyond i\_block + ibody EA, a regular block
+is allocated and the contents moved to that block.
+
+Pending a change to compact the extended attribute key used to store
+inline data, one ought to be able to store 160 bytes of data in a
+256-byte inode (as of June 2015, when i\_extra\_isize is 28). Prior to
+that, the limit was 156 bytes due to inefficient use of inode space.
+
+The inline data feature requires the presence of an extended attribute
+for “system.data”, even if the attribute value is zero length.
+
+Inline Directories
+~~~~~~~~~~~~~~~~~~
+
+The first four bytes of i\_block are the inode number of the parent
+directory. Following that is a 56-byte space for an array of directory
+entries; see ``struct ext4_dir_entry``. If there is a “system.data”
+attribute in the inode body, the EA value is an array of
+``struct ext4_dir_entry`` as well. Note that for inline directories, the
+i\_block and EA space are treated as separate dirent blocks; directory
+entries cannot span the two.
+
+Inline directory entries are not checksummed, as the inode checksum
+should protect all inline data contents.
diff --git a/Documentation/filesystems/ext4/ondisk/inodes.rst b/Documentation/filesystems/ext4/ondisk/inodes.rst
new file mode 100644
index 000000000000..655ce898f3f5
--- /dev/null
+++ b/Documentation/filesystems/ext4/ondisk/inodes.rst
@@ -0,0 +1,575 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Index Nodes
+-----------
+
+In a regular UNIX filesystem, the inode stores all the metadata
+pertaining to the file (time stamps, block maps, extended attributes,
+etc), not the directory entry. To find the information associated with a
+file, one must traverse the directory files to find the directory entry
+associated with a file, then load the inode to find the metadata for
+that file. ext4 appears to cheat (for performance reasons) a little bit
+by storing a copy of the file type (normally stored in the inode) in the
+directory entry. (Compare all this to FAT, which stores all the file
+information directly in the directory entry, but does not support hard
+links and is in general more seek-happy than ext4 due to its simpler
+block allocator and extensive use of linked lists.)
+
+The inode table is a linear array of ``struct ext4_inode``. The table is
+sized to have enough blocks to store at least
+``sb.s_inode_size * sb.s_inodes_per_group`` bytes. The number of the
+block group containing an inode can be calculated as
+``(inode_number - 1) / sb.s_inodes_per_group``, and the offset into the
+group's table is ``(inode_number - 1) % sb.s_inodes_per_group``. There
+is no inode 0.
+
+The inode checksum is calculated against the FS UUID, the inode number,
+and the inode structure itself.
+
+The inode table entry is laid out in ``struct ext4_inode``.
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Size
+ - Name
+ - Description
+ * - 0x0
+ - \_\_le16
+ - i\_mode
+ - File mode. See the table i_mode_ below.
+ * - 0x2
+ - \_\_le16
+ - i\_uid
+ - Lower 16-bits of Owner UID.
+ * - 0x4
+ - \_\_le32
+ - i\_size\_lo
+ - Lower 32-bits of size in bytes.
+ * - 0x8
+ - \_\_le32
+ - i\_atime
+ - Last access time, in seconds since the epoch. However, if the EA\_INODE
+ inode flag is set, this inode stores an extended attribute value and
+ this field contains the checksum of the value.
+ * - 0xC
+ - \_\_le32
+ - i\_ctime
+ - Last inode change time, in seconds since the epoch. However, if the
+ EA\_INODE inode flag is set, this inode stores an extended attribute
+ value and this field contains the lower 32 bits of the attribute value's
+ reference count.
+ * - 0x10
+ - \_\_le32
+ - i\_mtime
+ - Last data modification time, in seconds since the epoch. However, if the
+ EA\_INODE inode flag is set, this inode stores an extended attribute
+ value and this field contains the number of the inode that owns the
+ extended attribute.
+ * - 0x14
+ - \_\_le32
+ - i\_dtime
+ - Deletion Time, in seconds since the epoch.
+ * - 0x18
+ - \_\_le16
+ - i\_gid
+ - Lower 16-bits of GID.
+ * - 0x1A
+ - \_\_le16
+ - i\_links\_count
+ - Hard link count. Normally, ext4 does not permit an inode to have more
+ than 65,000 hard links. This applies to files as well as directories,
+ which means that there cannot be more than 64,998 subdirectories in a
+ directory (each subdirectory's '..' entry counts as a hard link, as does
+ the '.' entry in the directory itself). With the DIR\_NLINK feature
+ enabled, ext4 supports more than 64,998 subdirectories by setting this
+ field to 1 to indicate that the number of hard links is not known.
+ * - 0x1C
+ - \_\_le32
+ - i\_blocks\_lo
+ - Lower 32-bits of “block” count. If the huge\_file feature flag is not
+ set on the filesystem, the file consumes ``i_blocks_lo`` 512-byte blocks
+ on disk. If huge\_file is set and EXT4\_HUGE\_FILE\_FL is NOT set in
+ ``inode.i_flags``, then the file consumes ``i_blocks_lo + (i_blocks_hi
+ << 32)`` 512-byte blocks on disk. If huge\_file is set and
+ EXT4\_HUGE\_FILE\_FL IS set in ``inode.i_flags``, then this file
+ consumes (``i_blocks_lo + i_blocks_hi`` << 32) filesystem blocks on
+ disk.
+ * - 0x20
+ - \_\_le32
+ - i\_flags
+ - Inode flags. See the table i_flags_ below.
+ * - 0x24
+ - 4 bytes
+ - i\_osd1
+ - See the table i_osd1_ for more details.
+ * - 0x28
+ - 60 bytes
+ - i\_block[EXT4\_N\_BLOCKS=15]
+ - Block map or extent tree. See the section “The Contents of inode.i\_block”.
+ * - 0x64
+ - \_\_le32
+ - i\_generation
+ - File version (for NFS).
+ * - 0x68
+ - \_\_le32
+ - i\_file\_acl\_lo
+ - Lower 32-bits of extended attribute block. ACLs are of course one of
+ many possible extended attributes; I think the name of this field is a
+ result of the first use of extended attributes being for ACLs.
+ * - 0x6C
+ - \_\_le32
+ - i\_size\_high / i\_dir\_acl
+ - Upper 32-bits of file/directory size. In ext2/3 this field was named
+ i\_dir\_acl, though it was usually set to zero and never used.
+ * - 0x70
+ - \_\_le32
+ - i\_obso\_faddr
+ - (Obsolete) fragment address.
+ * - 0x74
+ - 12 bytes
+ - i\_osd2
+ - See the table i_osd2_ for more details.
+ * - 0x80
+ - \_\_le16
+ - i\_extra\_isize
+ - Size of this inode - 128. Alternately, the size of the extended inode
+ fields beyond the original ext2 inode, including this field.
+ * - 0x82
+ - \_\_le16
+ - i\_checksum\_hi
+ - Upper 16-bits of the inode checksum.
+ * - 0x84
+ - \_\_le32
+ - i\_ctime\_extra
+ - Extra change time bits. This provides sub-second precision. See Inode
+ Timestamps section.
+ * - 0x88
+ - \_\_le32
+ - i\_mtime\_extra
+ - Extra modification time bits. This provides sub-second precision.
+ * - 0x8C
+ - \_\_le32
+ - i\_atime\_extra
+ - Extra access time bits. This provides sub-second precision.
+ * - 0x90
+ - \_\_le32
+ - i\_crtime
+ - File creation time, in seconds since the epoch.
+ * - 0x94
+ - \_\_le32
+ - i\_crtime\_extra
+ - Extra file creation time bits. This provides sub-second precision.
+ * - 0x98
+ - \_\_le32
+ - i\_version\_hi
+ - Upper 32-bits for version number.
+ * - 0x9C
+ - \_\_le32
+ - i\_projid
+ - Project ID.
+
+.. _i_mode:
+
+The ``i_mode`` value is a combination of the following flags:
+
+.. list-table::
+ :widths: 1 79
+ :header-rows: 1
+
+ * - Value
+ - Description
+ * - 0x1
+ - S\_IXOTH (Others may execute)
+ * - 0x2
+ - S\_IWOTH (Others may write)
+ * - 0x4
+ - S\_IROTH (Others may read)
+ * - 0x8
+ - S\_IXGRP (Group members may execute)
+ * - 0x10
+ - S\_IWGRP (Group members may write)
+ * - 0x20
+ - S\_IRGRP (Group members may read)
+ * - 0x40
+ - S\_IXUSR (Owner may execute)
+ * - 0x80
+ - S\_IWUSR (Owner may write)
+ * - 0x100
+ - S\_IRUSR (Owner may read)
+ * - 0x200
+ - S\_ISVTX (Sticky bit)
+ * - 0x400
+ - S\_ISGID (Set GID)
+ * - 0x800
+ - S\_ISUID (Set UID)
+ * -
+ - These are mutually-exclusive file types:
+ * - 0x1000
+ - S\_IFIFO (FIFO)
+ * - 0x2000
+ - S\_IFCHR (Character device)
+ * - 0x4000
+ - S\_IFDIR (Directory)
+ * - 0x6000
+ - S\_IFBLK (Block device)
+ * - 0x8000
+ - S\_IFREG (Regular file)
+ * - 0xA000
+ - S\_IFLNK (Symbolic link)
+ * - 0xC000
+ - S\_IFSOCK (Socket)
+
+.. _i_flags:
+
+The ``i_flags`` field is a combination of these values:
+
+.. list-table::
+ :widths: 1 79
+ :header-rows: 1
+
+ * - Value
+ - Description
+ * - 0x1
+ - This file requires secure deletion (EXT4\_SECRM\_FL). (not implemented)
+ * - 0x2
+ - This file should be preserved, should undeletion be desired
+ (EXT4\_UNRM\_FL). (not implemented)
+ * - 0x4
+ - File is compressed (EXT4\_COMPR\_FL). (not really implemented)
+ * - 0x8
+ - All writes to the file must be synchronous (EXT4\_SYNC\_FL).
+ * - 0x10
+ - File is immutable (EXT4\_IMMUTABLE\_FL).
+ * - 0x20
+ - File can only be appended (EXT4\_APPEND\_FL).
+ * - 0x40
+ - The dump(1) utility should not dump this file (EXT4\_NODUMP\_FL).
+ * - 0x80
+ - Do not update access time (EXT4\_NOATIME\_FL).
+ * - 0x100
+ - Dirty compressed file (EXT4\_DIRTY\_FL). (not used)
+ * - 0x200
+ - File has one or more compressed clusters (EXT4\_COMPRBLK\_FL). (not used)
+ * - 0x400
+ - Do not compress file (EXT4\_NOCOMPR\_FL). (not used)
+ * - 0x800
+ - Encrypted inode (EXT4\_ENCRYPT\_FL). This bit value previously was
+ EXT4\_ECOMPR\_FL (compression error), which was never used.
+ * - 0x1000
+ - Directory has hashed indexes (EXT4\_INDEX\_FL).
+ * - 0x2000
+ - AFS magic directory (EXT4\_IMAGIC\_FL).
+ * - 0x4000
+ - File data must always be written through the journal
+ (EXT4\_JOURNAL\_DATA\_FL).
+ * - 0x8000
+ - File tail should not be merged (EXT4\_NOTAIL\_FL). (not used by ext4)
+ * - 0x10000
+ - All directory entry data should be written synchronously (see
+ ``dirsync``) (EXT4\_DIRSYNC\_FL).
+ * - 0x20000
+ - Top of directory hierarchy (EXT4\_TOPDIR\_FL).
+ * - 0x40000
+ - This is a huge file (EXT4\_HUGE\_FILE\_FL).
+ * - 0x80000
+ - Inode uses extents (EXT4\_EXTENTS\_FL).
+ * - 0x200000
+ - Inode stores a large extended attribute value in its data blocks
+ (EXT4\_EA\_INODE\_FL).
+ * - 0x400000
+ - This file has blocks allocated past EOF (EXT4\_EOFBLOCKS\_FL).
+ (deprecated)
+ * - 0x01000000
+ - Inode is a snapshot (``EXT4_SNAPFILE_FL``). (not in mainline)
+ * - 0x04000000
+ - Snapshot is being deleted (``EXT4_SNAPFILE_DELETED_FL``). (not in
+ mainline)
+ * - 0x08000000
+ - Snapshot shrink has completed (``EXT4_SNAPFILE_SHRUNK_FL``). (not in
+ mainline)
+ * - 0x10000000
+ - Inode has inline data (EXT4\_INLINE\_DATA\_FL).
+ * - 0x20000000
+ - Create children with the same project ID (EXT4\_PROJINHERIT\_FL).
+ * - 0x80000000
+ - Reserved for ext4 library (EXT4\_RESERVED\_FL).
+ * -
+ - Aggregate flags:
+ * - 0x4BDFFF
+ - User-visible flags.
+ * - 0x4B80FF
+ - User-modifiable flags. Note that while EXT4\_JOURNAL\_DATA\_FL and
+ EXT4\_EXTENTS\_FL can be set with setattr, they are not in the kernel's
+ EXT4\_FL\_USER\_MODIFIABLE mask, since it needs to handle the setting of
+ these flags in a special manner and they are masked out of the set of
+ flags that are saved directly to i\_flags.
+
+.. _i_osd1:
+
+The ``osd1`` field has multiple meanings depending on the creator:
+
+Linux:
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Size
+ - Name
+ - Description
+ * - 0x0
+ - \_\_le32
+ - l\_i\_version
+ - Inode version. However, if the EA\_INODE inode flag is set, this inode
+ stores an extended attribute value and this field contains the upper 32
+ bits of the attribute value's reference count.
+
+Hurd:
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Size
+ - Name
+ - Description
+ * - 0x0
+ - \_\_le32
+ - h\_i\_translator
+ - ??
+
+Masix:
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Size
+ - Name
+ - Description
+ * - 0x0
+ - \_\_le32
+ - m\_i\_reserved
+ - ??
+
+.. _i_osd2:
+
+The ``osd2`` field has multiple meanings depending on the filesystem creator:
+
+Linux:
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Size
+ - Name
+ - Description
+ * - 0x0
+ - \_\_le16
+ - l\_i\_blocks\_high
+ - Upper 16-bits of the block count. Please see the note attached to
+ i\_blocks\_lo.
+ * - 0x2
+ - \_\_le16
+ - l\_i\_file\_acl\_high
+ - Upper 16-bits of the extended attribute block (historically, the file
+ ACL location). See the Extended Attributes section below.
+ * - 0x4
+ - \_\_le16
+ - l\_i\_uid\_high
+ - Upper 16-bits of the Owner UID.
+ * - 0x6
+ - \_\_le16
+ - l\_i\_gid\_high
+ - Upper 16-bits of the GID.
+ * - 0x8
+ - \_\_le16
+ - l\_i\_checksum\_lo
+ - Lower 16-bits of the inode checksum.
+ * - 0xA
+ - \_\_le16
+ - l\_i\_reserved
+ - Unused.
+
+Hurd:
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Size
+ - Name
+ - Description
+ * - 0x0
+ - \_\_le16
+ - h\_i\_reserved1
+ - ??
+ * - 0x2
+ - \_\_u16
+ - h\_i\_mode\_high
+ - Upper 16-bits of the file mode.
+ * - 0x4
+ - \_\_le16
+ - h\_i\_uid\_high
+ - Upper 16-bits of the Owner UID.
+ * - 0x6
+ - \_\_le16
+ - h\_i\_gid\_high
+ - Upper 16-bits of the GID.
+ * - 0x8
+ - \_\_u32
+ - h\_i\_author
+ - Author code?
+
+Masix:
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Size
+ - Name
+ - Description
+ * - 0x0
+ - \_\_le16
+ - h\_i\_reserved1
+ - ??
+ * - 0x2
+ - \_\_u16
+ - m\_i\_file\_acl\_high
+ - Upper 16-bits of the extended attribute block (historically, the file
+ ACL location).
+ * - 0x4
+ - \_\_u32
+ - m\_i\_reserved2[2]
+ - ??
+
+Inode Size
+~~~~~~~~~~
+
+In ext2 and ext3, the inode structure size was fixed at 128 bytes
+(``EXT2_GOOD_OLD_INODE_SIZE``) and each inode had a disk record size of
+128 bytes. Starting with ext4, it is possible to allocate a larger
+on-disk inode at format time for all inodes in the filesystem to provide
+space beyond the end of the original ext2 inode. The on-disk inode
+record size is recorded in the superblock as ``s_inode_size``. The
+number of bytes actually used by struct ext4\_inode beyond the original
+128-byte ext2 inode is recorded in the ``i_extra_isize`` field for each
+inode, which allows struct ext4\_inode to grow for a new kernel without
+having to upgrade all of the on-disk inodes. Access to fields beyond
+EXT2\_GOOD\_OLD\_INODE\_SIZE should be verified to be within
+``i_extra_isize``. By default, ext4 inode records are 256 bytes, and (as
+of October 2013) the inode structure is 156 bytes
+(``i_extra_isize = 28``). The extra space between the end of the inode
+structure and the end of the inode record can be used to store extended
+attributes. Each inode record can be as large as the filesystem block
+size, though this is not terribly efficient.
+
+Finding an Inode
+~~~~~~~~~~~~~~~~
+
+Each block group contains ``sb->s_inodes_per_group`` inodes. Because
+inode 0 is defined not to exist, this formula can be used to find the
+block group that an inode lives in:
+``bg = (inode_num - 1) / sb->s_inodes_per_group``. The particular inode
+can be found within the block group's inode table at
+``index = (inode_num - 1) % sb->s_inodes_per_group``. To get the byte
+address within the inode table, use
+``offset = index * sb->s_inode_size``.
+
+Inode Timestamps
+~~~~~~~~~~~~~~~~
+
+Four timestamps are recorded in the lower 128 bytes of the inode
+structure -- inode change time (ctime), access time (atime), data
+modification time (mtime), and deletion time (dtime). The four fields
+are 32-bit signed integers that represent seconds since the Unix epoch
+(1970-01-01 00:00:00 GMT), which means that the fields will overflow in
+January 2038. For inodes that are not linked from any directory but are
+still open (orphan inodes), the dtime field is overloaded for use with
+the orphan list. The superblock field ``s_last_orphan`` points to the
+first inode in the orphan list; dtime is then the number of the next
+orphaned inode, or zero if there are no more orphans.
+
+If the inode structure size ``sb->s_inode_size`` is larger than 128
+bytes and the ``i_inode_extra`` field is large enough to encompass the
+respective ``i_[cma]time_extra`` field, the ctime, atime, and mtime
+inode fields are widened to 64 bits. Within this “extra” 32-bit field,
+the lower two bits are used to extend the 32-bit seconds field to be 34
+bit wide; the upper 30 bits are used to provide nanosecond timestamp
+accuracy. Therefore, timestamps should not overflow until May 2446.
+dtime was not widened. There is also a fifth timestamp to record inode
+creation time (crtime); this field is 64-bits wide and decoded in the
+same manner as 64-bit [cma]time. Neither crtime nor dtime are accessible
+through the regular stat() interface, though debugfs will report them.
+
+We use the 32-bit signed time value plus (2^32 \* (extra epoch bits)).
+In other words:
+
+.. list-table::
+ :widths: 20 20 20 20 20
+ :header-rows: 1
+
+ * - Extra epoch bits
+ - MSB of 32-bit time
+ - Adjustment for signed 32-bit to 64-bit tv\_sec
+ - Decoded 64-bit tv\_sec
+ - valid time range
+ * - 0 0
+ - 1
+ - 0
+ - ``-0x80000000 - -0x00000001``
+ - 1901-12-13 to 1969-12-31
+ * - 0 0
+ - 0
+ - 0
+ - ``0x000000000 - 0x07fffffff``
+ - 1970-01-01 to 2038-01-19
+ * - 0 1
+ - 1
+ - 0x100000000
+ - ``0x080000000 - 0x0ffffffff``
+ - 2038-01-19 to 2106-02-07
+ * - 0 1
+ - 0
+ - 0x100000000
+ - ``0x100000000 - 0x17fffffff``
+ - 2106-02-07 to 2174-02-25
+ * - 1 0
+ - 1
+ - 0x200000000
+ - ``0x180000000 - 0x1ffffffff``
+ - 2174-02-25 to 2242-03-16
+ * - 1 0
+ - 0
+ - 0x200000000
+ - ``0x200000000 - 0x27fffffff``
+ - 2242-03-16 to 2310-04-04
+ * - 1 1
+ - 1
+ - 0x300000000
+ - ``0x280000000 - 0x2ffffffff``
+ - 2310-04-04 to 2378-04-22
+ * - 1 1
+ - 0
+ - 0x300000000
+ - ``0x300000000 - 0x37fffffff``
+ - 2378-04-22 to 2446-05-10
+
+This is a somewhat odd encoding since there are effectively seven times
+as many positive values as negative values. There have also been
+long-standing bugs decoding and encoding dates beyond 2038, which don't
+seem to be fixed as of kernel 3.12 and e2fsprogs 1.42.8. 64-bit kernels
+incorrectly use the extra epoch bits 1,1 for dates between 1901 and
+1970. At some point the kernel will be fixed and e2fsck will fix this
+situation, assuming that it is run before 2310.
diff --git a/Documentation/filesystems/ext4/ondisk/journal.rst b/Documentation/filesystems/ext4/ondisk/journal.rst
new file mode 100644
index 000000000000..e7031af86876
--- /dev/null
+++ b/Documentation/filesystems/ext4/ondisk/journal.rst
@@ -0,0 +1,611 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Journal (jbd2)
+--------------
+
+Introduced in ext3, the ext4 filesystem employs a journal to protect the
+filesystem against corruption in the case of a system crash. A small
+continuous region of disk (default 128MiB) is reserved inside the
+filesystem as a place to land “important” data writes on-disk as quickly
+as possible. Once the important data transaction is fully written to the
+disk and flushed from the disk write cache, a record of the data being
+committed is also written to the journal. At some later point in time,
+the journal code writes the transactions to their final locations on
+disk (this could involve a lot of seeking or a lot of small
+read-write-erases) before erasing the commit record. Should the system
+crash during the second slow write, the journal can be replayed all the
+way to the latest commit record, guaranteeing the atomicity of whatever
+gets written through the journal to the disk. The effect of this is to
+guarantee that the filesystem does not become stuck midway through a
+metadata update.
+
+For performance reasons, ext4 by default only writes filesystem metadata
+through the journal. This means that file data blocks are /not/
+guaranteed to be in any consistent state after a crash. If this default
+guarantee level (``data=ordered``) is not satisfactory, there is a mount
+option to control journal behavior. If ``data=journal``, all data and
+metadata are written to disk through the journal. This is slower but
+safest. If ``data=writeback``, dirty data blocks are not flushed to the
+disk before the metadata are written to disk through the journal.
+
+The journal inode is typically inode 8. The first 68 bytes of the
+journal inode are replicated in the ext4 superblock. The journal itself
+is normal (but hidden) file within the filesystem. The file usually
+consumes an entire block group, though mke2fs tries to put it in the
+middle of the disk.
+
+All fields in jbd2 are written to disk in big-endian order. This is the
+opposite of ext4.
+
+NOTE: Both ext4 and ocfs2 use jbd2.
+
+The maximum size of a journal embedded in an ext4 filesystem is 2^32
+blocks. jbd2 itself does not seem to care.
+
+Layout
+~~~~~~
+
+Generally speaking, the journal has this format:
+
+.. list-table::
+ :widths: 1 1 78
+ :header-rows: 1
+
+ * - Superblock
+ - descriptor\_block (data\_blocks or revocation\_block) [more data or
+ revocations] commmit\_block
+ - [more transactions...]
+ * -
+ - One transaction
+ -
+
+Notice that a transaction begins with either a descriptor and some data,
+or a block revocation list. A finished transaction always ends with a
+commit. If there is no commit record (or the checksums don't match), the
+transaction will be discarded during replay.
+
+External Journal
+~~~~~~~~~~~~~~~~
+
+Optionally, an ext4 filesystem can be created with an external journal
+device (as opposed to an internal journal, which uses a reserved inode).
+In this case, on the filesystem device, ``s_journal_inum`` should be
+zero and ``s_journal_uuid`` should be set. On the journal device there
+will be an ext4 super block in the usual place, with a matching UUID.
+The journal superblock will be in the next full block after the
+superblock.
+
+.. list-table::
+ :widths: 1 1 1 1 76
+ :header-rows: 1
+
+ * - 1024 bytes of padding
+ - ext4 Superblock
+ - Journal Superblock
+ - descriptor\_block (data\_blocks or revocation\_block) [more data or
+ revocations] commmit\_block
+ - [more transactions...]
+ * -
+ -
+ -
+ - One transaction
+ -
+
+Block Header
+~~~~~~~~~~~~
+
+Every block in the journal starts with a common 12-byte header
+``struct journal_header_s``:
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Type
+ - Name
+ - Description
+ * - 0x0
+ - \_\_be32
+ - h\_magic
+ - jbd2 magic number, 0xC03B3998.
+ * - 0x4
+ - \_\_be32
+ - h\_blocktype
+ - Description of what this block contains. See the jbd2_blocktype_ table
+ below.
+ * - 0x8
+ - \_\_be32
+ - h\_sequence
+ - The transaction ID that goes with this block.
+
+.. _jbd2_blocktype:
+
+The journal block type can be any one of:
+
+.. list-table::
+ :widths: 1 79
+ :header-rows: 1
+
+ * - Value
+ - Description
+ * - 1
+ - Descriptor. This block precedes a series of data blocks that were
+ written through the journal during a transaction.
+ * - 2
+ - Block commit record. This block signifies the completion of a
+ transaction.
+ * - 3
+ - Journal superblock, v1.
+ * - 4
+ - Journal superblock, v2.
+ * - 5
+ - Block revocation records. This speeds up recovery by enabling the
+ journal to skip writing blocks that were subsequently rewritten.
+
+Super Block
+~~~~~~~~~~~
+
+The super block for the journal is much simpler as compared to ext4's.
+The key data kept within are size of the journal, and where to find the
+start of the log of transactions.
+
+The journal superblock is recorded as ``struct journal_superblock_s``,
+which is 1024 bytes long:
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Type
+ - Name
+ - Description
+ * -
+ -
+ -
+ - Static information describing the journal.
+ * - 0x0
+ - journal\_header\_t (12 bytes)
+ - s\_header
+ - Common header identifying this as a superblock.
+ * - 0xC
+ - \_\_be32
+ - s\_blocksize
+ - Journal device block size.
+ * - 0x10
+ - \_\_be32
+ - s\_maxlen
+ - Total number of blocks in this journal.
+ * - 0x14
+ - \_\_be32
+ - s\_first
+ - First block of log information.
+ * -
+ -
+ -
+ - Dynamic information describing the current state of the log.
+ * - 0x18
+ - \_\_be32
+ - s\_sequence
+ - First commit ID expected in log.
+ * - 0x1C
+ - \_\_be32
+ - s\_start
+ - Block number of the start of log. Contrary to the comments, this field
+ being zero does not imply that the journal is clean!
+ * - 0x20
+ - \_\_be32
+ - s\_errno
+ - Error value, as set by jbd2\_journal\_abort().
+ * -
+ -
+ -
+ - The remaining fields are only valid in a v2 superblock.
+ * - 0x24
+ - \_\_be32
+ - s\_feature\_compat;
+ - Compatible feature set. See the table jbd2_compat_ below.
+ * - 0x28
+ - \_\_be32
+ - s\_feature\_incompat
+ - Incompatible feature set. See the table jbd2_incompat_ below.
+ * - 0x2C
+ - \_\_be32
+ - s\_feature\_ro\_compat
+ - Read-only compatible feature set. There aren't any of these currently.
+ * - 0x30
+ - \_\_u8
+ - s\_uuid[16]
+ - 128-bit uuid for journal. This is compared against the copy in the ext4
+ super block at mount time.
+ * - 0x40
+ - \_\_be32
+ - s\_nr\_users
+ - Number of file systems sharing this journal.
+ * - 0x44
+ - \_\_be32
+ - s\_dynsuper
+ - Location of dynamic super block copy. (Not used?)
+ * - 0x48
+ - \_\_be32
+ - s\_max\_transaction
+ - Limit of journal blocks per transaction. (Not used?)
+ * - 0x4C
+ - \_\_be32
+ - s\_max\_trans\_data
+ - Limit of data blocks per transaction. (Not used?)
+ * - 0x50
+ - \_\_u8
+ - s\_checksum\_type
+ - Checksum algorithm used for the journal. See jbd2_checksum_type_ for
+ more info.
+ * - 0x51
+ - \_\_u8[3]
+ - s\_padding2
+ -
+ * - 0x54
+ - \_\_u32
+ - s\_padding[42]
+ -
+ * - 0xFC
+ - \_\_be32
+ - s\_checksum
+ - Checksum of the entire superblock, with this field set to zero.
+ * - 0x100
+ - \_\_u8
+ - s\_users[16\*48]
+ - ids of all file systems sharing the log. e2fsprogs/Linux don't allow
+ shared external journals, but I imagine Lustre (or ocfs2?), which use
+ the jbd2 code, might.
+
+.. _jbd2_compat:
+
+The journal compat features are any combination of the following:
+
+.. list-table::
+ :widths: 1 79
+ :header-rows: 1
+
+ * - Value
+ - Description
+ * - 0x1
+ - Journal maintains checksums on the data blocks.
+ (JBD2\_FEATURE\_COMPAT\_CHECKSUM)
+
+.. _jbd2_incompat:
+
+The journal incompat features are any combination of the following:
+
+.. list-table::
+ :widths: 1 79
+ :header-rows: 1
+
+ * - Value
+ - Description
+ * - 0x1
+ - Journal has block revocation records. (JBD2\_FEATURE\_INCOMPAT\_REVOKE)
+ * - 0x2
+ - Journal can deal with 64-bit block numbers.
+ (JBD2\_FEATURE\_INCOMPAT\_64BIT)
+ * - 0x4
+ - Journal commits asynchronously. (JBD2\_FEATURE\_INCOMPAT\_ASYNC\_COMMIT)
+ * - 0x8
+ - This journal uses v2 of the checksum on-disk format. Each journal
+ metadata block gets its own checksum, and the block tags in the
+ descriptor table contain checksums for each of the data blocks in the
+ journal. (JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2)
+ * - 0x10
+ - This journal uses v3 of the checksum on-disk format. This is the same as
+ v2, but the journal block tag size is fixed regardless of the size of
+ block numbers. (JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3)
+
+.. _jbd2_checksum_type:
+
+Journal checksum type codes are one of the following. crc32 or crc32c are the
+most likely choices.
+
+.. list-table::
+ :widths: 1 79
+ :header-rows: 1
+
+ * - Value
+ - Description
+ * - 1
+ - CRC32
+ * - 2
+ - MD5
+ * - 3
+ - SHA1
+ * - 4
+ - CRC32C
+
+Descriptor Block
+~~~~~~~~~~~~~~~~
+
+The descriptor block contains an array of journal block tags that
+describe the final locations of the data blocks that follow in the
+journal. Descriptor blocks are open-coded instead of being completely
+described by a data structure, but here is the block structure anyway.
+Descriptor blocks consume at least 36 bytes, but use a full block:
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Type
+ - Name
+ - Descriptor
+ * - 0x0
+ - journal\_header\_t
+ - (open coded)
+ - Common block header.
+ * - 0xC
+ - struct journal\_block\_tag\_s
+ - open coded array[]
+ - Enough tags either to fill up the block or to describe all the data
+ blocks that follow this descriptor block.
+
+Journal block tags have any of the following formats, depending on which
+journal feature and block tag flags are set.
+
+If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 is set, the journal block tag is
+defined as ``struct journal_block_tag3_s``, which looks like the
+following. The size is 16 or 32 bytes.
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Type
+ - Name
+ - Descriptor
+ * - 0x0
+ - \_\_be32
+ - t\_blocknr
+ - Lower 32-bits of the location of where the corresponding data block
+ should end up on disk.
+ * - 0x4
+ - \_\_be32
+ - t\_flags
+ - Flags that go with the descriptor. See the table jbd2_tag_flags_ for
+ more info.
+ * - 0x8
+ - \_\_be32
+ - t\_blocknr\_high
+ - Upper 32-bits of the location of where the corresponding data block
+ should end up on disk. This is zero if JBD2\_FEATURE\_INCOMPAT\_64BIT is
+ not enabled.
+ * - 0xC
+ - \_\_be32
+ - t\_checksum
+ - Checksum of the journal UUID, the sequence number, and the data block.
+ * -
+ -
+ -
+ - This field appears to be open coded. It always comes at the end of the
+ tag, after t_checksum. This field is not present if the "same UUID" flag
+ is set.
+ * - 0x8 or 0xC
+ - char
+ - uuid[16]
+ - A UUID to go with this tag. This field appears to be copied from the
+ ``j_uuid`` field in ``struct journal_s``, but only tune2fs touches that
+ field.
+
+.. _jbd2_tag_flags:
+
+The journal tag flags are any combination of the following:
+
+.. list-table::
+ :widths: 1 79
+ :header-rows: 1
+
+ * - Value
+ - Description
+ * - 0x1
+ - On-disk block is escaped. The first four bytes of the data block just
+ happened to match the jbd2 magic number.
+ * - 0x2
+ - This block has the same UUID as previous, therefore the UUID field is
+ omitted.
+ * - 0x4
+ - The data block was deleted by the transaction. (Not used?)
+ * - 0x8
+ - This is the last tag in this descriptor block.
+
+If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 is NOT set, the journal block tag
+is defined as ``struct journal_block_tag_s``, which looks like the
+following. The size is 8, 12, 24, or 28 bytes:
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Type
+ - Name
+ - Descriptor
+ * - 0x0
+ - \_\_be32
+ - t\_blocknr
+ - Lower 32-bits of the location of where the corresponding data block
+ should end up on disk.
+ * - 0x4
+ - \_\_be16
+ - t\_checksum
+ - Checksum of the journal UUID, the sequence number, and the data block.
+ Note that only the lower 16 bits are stored.
+ * - 0x6
+ - \_\_be16
+ - t\_flags
+ - Flags that go with the descriptor. See the table jbd2_tag_flags_ for
+ more info.
+ * -
+ -
+ -
+ - This next field is only present if the super block indicates support for
+ 64-bit block numbers.
+ * - 0x8
+ - \_\_be32
+ - t\_blocknr\_high
+ - Upper 32-bits of the location of where the corresponding data block
+ should end up on disk.
+ * -
+ -
+ -
+ - This field appears to be open coded. It always comes at the end of the
+ tag, after t_flags or t_blocknr_high. This field is not present if the
+ "same UUID" flag is set.
+ * - 0x8 or 0xC
+ - char
+ - uuid[16]
+ - A UUID to go with this tag. This field appears to be copied from the
+ ``j_uuid`` field in ``struct journal_s``, but only tune2fs touches that
+ field.
+
+If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2 or
+JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 are set, the end of the block is a
+``struct jbd2_journal_block_tail``, which looks like this:
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Type
+ - Name
+ - Descriptor
+ * - 0x0
+ - \_\_be32
+ - t\_checksum
+ - Checksum of the journal UUID + the descriptor block, with this field set
+ to zero.
+
+Data Block
+~~~~~~~~~~
+
+In general, the data blocks being written to disk through the journal
+are written verbatim into the journal file after the descriptor block.
+However, if the first four bytes of the block match the jbd2 magic
+number then those four bytes are replaced with zeroes and the “escaped”
+flag is set in the descriptor block tag.
+
+Revocation Block
+~~~~~~~~~~~~~~~~
+
+A revocation block is used to prevent replay of a block in an earlier
+transaction. This is used to mark blocks that were journalled at one
+time but are no longer journalled. Typically this happens if a metadata
+block is freed and re-allocated as a file data block; in this case, a
+journal replay after the file block was written to disk will cause
+corruption.
+
+**NOTE**: This mechanism is NOT used to express “this journal block is
+superseded by this other journal block”, as the author (djwong)
+mistakenly thought. Any block being added to a transaction will cause
+the removal of all existing revocation records for that block.
+
+Revocation blocks are described in
+``struct jbd2_journal_revoke_header_s``, are at least 16 bytes in
+length, but use a full block:
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Type
+ - Name
+ - Description
+ * - 0x0
+ - journal\_header\_t
+ - r\_header
+ - Common block header.
+ * - 0xC
+ - \_\_be32
+ - r\_count
+ - Number of bytes used in this block.
+ * - 0x10
+ - \_\_be32 or \_\_be64
+ - blocks[0]
+ - Blocks to revoke.
+
+After r\_count is a linear array of block numbers that are effectively
+revoked by this transaction. The size of each block number is 8 bytes if
+the superblock advertises 64-bit block number support, or 4 bytes
+otherwise.
+
+If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2 or
+JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 are set, the end of the revocation
+block is a ``struct jbd2_journal_revoke_tail``, which has this format:
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Type
+ - Name
+ - Description
+ * - 0x0
+ - \_\_be32
+ - r\_checksum
+ - Checksum of the journal UUID + revocation block
+
+Commit Block
+~~~~~~~~~~~~
+
+The commit block is a sentry that indicates that a transaction has been
+completely written to the journal. Once this commit block reaches the
+journal, the data stored with this transaction can be written to their
+final locations on disk.
+
+The commit block is described by ``struct commit_header``, which is 32
+bytes long (but uses a full block):
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Type
+ - Name
+ - Descriptor
+ * - 0x0
+ - journal\_header\_s
+ - (open coded)
+ - Common block header.
+ * - 0xC
+ - unsigned char
+ - h\_chksum\_type
+ - The type of checksum to use to verify the integrity of the data blocks
+ in the transaction. See jbd2_checksum_type_ for more info.
+ * - 0xD
+ - unsigned char
+ - h\_chksum\_size
+ - The number of bytes used by the checksum. Most likely 4.
+ * - 0xE
+ - unsigned char
+ - h\_padding[2]
+ -
+ * - 0x10
+ - \_\_be32
+ - h\_chksum[JBD2\_CHECKSUM\_BYTES]
+ - 32 bytes of space to store checksums. If
+ JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2 or JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3
+ are set, the first ``__be32`` is the checksum of the journal UUID and
+ the entire commit block, with this field zeroed. If
+ JBD2\_FEATURE\_COMPAT\_CHECKSUM is set, the first ``__be32`` is the
+ crc32 of all the blocks already written to the transaction.
+ * - 0x30
+ - \_\_be64
+ - h\_commit\_sec
+ - The time that the transaction was committed, in seconds since the epoch.
+ * - 0x38
+ - \_\_be32
+ - h\_commit\_nsec
+ - Nanoseconds component of the above timestamp.
+
diff --git a/Documentation/filesystems/ext4/ondisk/mmp.rst b/Documentation/filesystems/ext4/ondisk/mmp.rst
new file mode 100644
index 000000000000..b7d7a3137f80
--- /dev/null
+++ b/Documentation/filesystems/ext4/ondisk/mmp.rst
@@ -0,0 +1,77 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Multiple Mount Protection
+-------------------------
+
+Multiple mount protection (MMP) is a feature that protects the
+filesystem against multiple hosts trying to use the filesystem
+simultaneously. When a filesystem is opened (for mounting, or fsck,
+etc.), the MMP code running on the node (call it node A) checks a
+sequence number. If the sequence number is EXT4\_MMP\_SEQ\_CLEAN, the
+open continues. If the sequence number is EXT4\_MMP\_SEQ\_FSCK, then
+fsck is (hopefully) running, and open fails immediately. Otherwise, the
+open code will wait for twice the specified MMP check interval and check
+the sequence number again. If the sequence number has changed, then the
+filesystem is active on another machine and the open fails. If the MMP
+code passes all of those checks, a new MMP sequence number is generated
+and written to the MMP block, and the mount proceeds.
+
+While the filesystem is live, the kernel sets up a timer to re-check the
+MMP block at the specified MMP check interval. To perform the re-check,
+the MMP sequence number is re-read; if it does not match the in-memory
+MMP sequence number, then another node (node B) has mounted the
+filesystem, and node A remounts the filesystem read-only. If the
+sequence numbers match, the sequence number is incremented both in
+memory and on disk, and the re-check is complete.
+
+The hostname and device filename are written into the MMP block whenever
+an open operation succeeds. The MMP code does not use these values; they
+are provided purely for informational purposes.
+
+The checksum is calculated against the FS UUID and the MMP structure.
+The MMP structure (``struct mmp_struct``) is as follows:
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Type
+ - Name
+ - Description
+ * - 0x0
+ - \_\_le32
+ - mmp\_magic
+ - Magic number for MMP, 0x004D4D50 (“MMP”).
+ * - 0x4
+ - \_\_le32
+ - mmp\_seq
+ - Sequence number, updated periodically.
+ * - 0x8
+ - \_\_le64
+ - mmp\_time
+ - Time that the MMP block was last updated.
+ * - 0x10
+ - char[64]
+ - mmp\_nodename
+ - Hostname of the node that opened the filesystem.
+ * - 0x50
+ - char[32]
+ - mmp\_bdevname
+ - Block device name of the filesystem.
+ * - 0x70
+ - \_\_le16
+ - mmp\_check\_interval
+ - The MMP re-check interval, in seconds.
+ * - 0x72
+ - \_\_le16
+ - mmp\_pad1
+ - Zero.
+ * - 0x74
+ - \_\_le32[226]
+ - mmp\_pad2
+ - Zero.
+ * - 0x3FC
+ - \_\_le32
+ - mmp\_checksum
+ - Checksum of the MMP block.
diff --git a/Documentation/filesystems/ext4/ondisk/overview.rst b/Documentation/filesystems/ext4/ondisk/overview.rst
new file mode 100644
index 000000000000..cbab18baba12
--- /dev/null
+++ b/Documentation/filesystems/ext4/ondisk/overview.rst
@@ -0,0 +1,26 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+High Level Design
+=================
+
+An ext4 file system is split into a series of block groups. To reduce
+performance difficulties due to fragmentation, the block allocator tries
+very hard to keep each file's blocks within the same group, thereby
+reducing seek times. The size of a block group is specified in
+``sb.s_blocks_per_group`` blocks, though it can also calculated as 8 \*
+``block_size_in_bytes``. With the default block size of 4KiB, each group
+will contain 32,768 blocks, for a length of 128MiB. The number of block
+groups is the size of the device divided by the size of a block group.
+
+All fields in ext4 are written to disk in little-endian order. HOWEVER,
+all fields in jbd2 (the journal) are written to disk in big-endian
+order.
+
+.. include:: blocks.rst
+.. include:: blockgroup.rst
+.. include:: special_inodes.rst
+.. include:: allocators.rst
+.. include:: checksums.rst
+.. include:: bigalloc.rst
+.. include:: inlinedata.rst
+.. include:: eainode.rst
diff --git a/Documentation/filesystems/ext4/ondisk/special_inodes.rst b/Documentation/filesystems/ext4/ondisk/special_inodes.rst
new file mode 100644
index 000000000000..a82f70c9baeb
--- /dev/null
+++ b/Documentation/filesystems/ext4/ondisk/special_inodes.rst
@@ -0,0 +1,38 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Special inodes
+--------------
+
+ext4 reserves some inode for special features, as follows:
+
+.. list-table::
+ :widths: 1 79
+ :header-rows: 1
+
+ * - inode Number
+ - Purpose
+ * - 0
+ - Doesn't exist; there is no inode 0.
+ * - 1
+ - List of defective blocks.
+ * - 2
+ - Root directory.
+ * - 3
+ - User quota.
+ * - 4
+ - Group quota.
+ * - 5
+ - Boot loader.
+ * - 6
+ - Undelete directory.
+ * - 7
+ - Reserved group descriptors inode. (“resize inode”)
+ * - 8
+ - Journal inode.
+ * - 9
+ - The “exclude” inode, for snapshots(?)
+ * - 10
+ - Replica inode, used for some non-upstream feature?
+ * - 11
+ - Traditional first non-reserved inode. Usually this is the lost+found directory. See s\_first\_ino in the superblock.
+
diff --git a/Documentation/filesystems/ext4/ondisk/super.rst b/Documentation/filesystems/ext4/ondisk/super.rst
new file mode 100644
index 000000000000..5f81dd87e0b9
--- /dev/null
+++ b/Documentation/filesystems/ext4/ondisk/super.rst
@@ -0,0 +1,801 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Super Block
+-----------
+
+The superblock records various information about the enclosing
+filesystem, such as block counts, inode counts, supported features,
+maintenance information, and more.
+
+If the sparse\_super feature flag is set, redundant copies of the
+superblock and group descriptors are kept only in the groups whose group
+number is either 0 or a power of 3, 5, or 7. If the flag is not set,
+redundant copies are kept in all groups.
+
+The superblock checksum is calculated against the superblock structure,
+which includes the FS UUID.
+
+The ext4 superblock is laid out as follows in
+``struct ext4_super_block``:
+
+.. list-table::
+ :widths: 1 1 1 77
+ :header-rows: 1
+
+ * - Offset
+ - Size
+ - Name
+ - Description
+ * - 0x0
+ - \_\_le32
+ - s\_inodes\_count
+ - Total inode count.
+ * - 0x4
+ - \_\_le32
+ - s\_blocks\_count\_lo
+ - Total block count.
+ * - 0x8
+ - \_\_le32
+ - s\_r\_blocks\_count\_lo
+ - This number of blocks can only be allocated by the super-user.
+ * - 0xC
+ - \_\_le32
+ - s\_free\_blocks\_count\_lo
+ - Free block count.
+ * - 0x10
+ - \_\_le32
+ - s\_free\_inodes\_count
+ - Free inode count.
+ * - 0x14
+ - \_\_le32
+ - s\_first\_data\_block
+ - First data block. This must be at least 1 for 1k-block filesystems and
+ is typically 0 for all other block sizes.
+ * - 0x18
+ - \_\_le32
+ - s\_log\_block\_size
+ - Block size is 2 ^ (10 + s\_log\_block\_size).
+ * - 0x1C
+ - \_\_le32
+ - s\_log\_cluster\_size
+ - Cluster size is (2 ^ s\_log\_cluster\_size) blocks if bigalloc is
+ enabled. Otherwise s\_log\_cluster\_size must equal s\_log\_block\_size.
+ * - 0x20
+ - \_\_le32
+ - s\_blocks\_per\_group
+ - Blocks per group.
+ * - 0x24
+ - \_\_le32
+ - s\_clusters\_per\_group
+ - Clusters per group, if bigalloc is enabled. Otherwise
+ s\_clusters\_per\_group must equal s\_blocks\_per\_group.
+ * - 0x28
+ - \_\_le32
+ - s\_inodes\_per\_group
+ - Inodes per group.
+ * - 0x2C
+ - \_\_le32
+ - s\_mtime
+ - Mount time, in seconds since the epoch.
+ * - 0x30
+ - \_\_le32
+ - s\_wtime
+ - Write time, in seconds since the epoch.
+ * - 0x34
+ - \_\_le16
+ - s\_mnt\_count
+ - Number of mounts since the last fsck.
+ * - 0x36
+ - \_\_le16
+ - s\_max\_mnt\_count
+ - Number of mounts beyond which a fsck is needed.
+ * - 0x38
+ - \_\_le16
+ - s\_magic
+ - Magic signature, 0xEF53
+ * - 0x3A
+ - \_\_le16
+ - s\_state
+ - File system state. See super_state_ for more info.
+ * - 0x3C
+ - \_\_le16
+ - s\_errors
+ - Behaviour when detecting errors. See super_errors_ for more info.
+ * - 0x3E
+ - \_\_le16
+ - s\_minor\_rev\_level
+ - Minor revision level.
+ * - 0x40
+ - \_\_le32
+ - s\_lastcheck
+ - Time of last check, in seconds since the epoch.
+ * - 0x44
+ - \_\_le32
+ - s\_checkinterval
+ - Maximum time between checks, in seconds.
+ * - 0x48
+ - \_\_le32
+ - s\_creator\_os
+ - Creator OS. See the table super_creator_ for more info.
+ * - 0x4C
+ - \_\_le32
+ - s\_rev\_level
+ - Revision level. See the table super_revision_ for more info.
+ * - 0x50
+ - \_\_le16
+ - s\_def\_resuid
+ - Default uid for reserved blocks.
+ * - 0x52
+ - \_\_le16
+ - s\_def\_resgid
+ - Default gid for reserved blocks.
+ * -
+ -
+ -
+ - These fields are for EXT4_DYNAMIC_REV superblocks only.
+
+ Note: the difference between the compatible feature set and the
+ incompatible feature set is that if there is a bit set in the
+ incompatible feature set that the kernel doesn't know about, it should
+ refuse to mount the filesystem.
+
+ e2fsck's requirements are more strict; if it doesn't know
+ about a feature in either the compatible or incompatible feature set, it
+ must abort and not try to meddle with things it doesn't understand...
+ * - 0x54
+ - \_\_le32
+ - s\_first\_ino
+ - First non-reserved inode.
+ * - 0x58
+ - \_\_le16
+ - s\_inode\_size
+ - Size of inode structure, in bytes.
+ * - 0x5A
+ - \_\_le16
+ - s\_block\_group\_nr
+ - Block group # of this superblock.
+ * - 0x5C
+ - \_\_le32
+ - s\_feature\_compat
+ - Compatible feature set flags. Kernel can still read/write this fs even
+ if it doesn't understand a flag; fsck should not do that. See the
+ super_compat_ table for more info.
+ * - 0x60
+ - \_\_le32
+ - s\_feature\_incompat
+ - Incompatible feature set. If the kernel or fsck doesn't understand one
+ of these bits, it should stop. See the super_incompat_ table for more
+ info.
+ * - 0x64
+ - \_\_le32
+ - s\_feature\_ro\_compat
+ - Readonly-compatible feature set. If the kernel doesn't understand one of
+ these bits, it can still mount read-only. See the super_rocompat_ table
+ for more info.
+ * - 0x68
+ - \_\_u8
+ - s\_uuid[16]
+ - 128-bit UUID for volume.
+ * - 0x78
+ - char
+ - s\_volume\_name[16]
+ - Volume label.
+ * - 0x88
+ - char
+ - s\_last\_mounted[64]
+ - Directory where filesystem was last mounted.
+ * - 0xC8
+ - \_\_le32
+ - s\_algorithm\_usage\_bitmap
+ - For compression (Not used in e2fsprogs/Linux)
+ * -
+ -
+ -
+ - Performance hints. Directory preallocation should only happen if the
+ EXT4_FEATURE_COMPAT_DIR_PREALLOC flag is on.
+ * - 0xCC
+ - \_\_u8
+ - s\_prealloc\_blocks
+ - #. of blocks to try to preallocate for ... files? (Not used in
+ e2fsprogs/Linux)
+ * - 0xCD
+ - \_\_u8
+ - s\_prealloc\_dir\_blocks
+ - #. of blocks to preallocate for directories. (Not used in
+ e2fsprogs/Linux)
+ * - 0xCE
+ - \_\_le16
+ - s\_reserved\_gdt\_blocks
+ - Number of reserved GDT entries for future filesystem expansion.
+ * -
+ -
+ -
+ - Journalling support is valid only if EXT4_FEATURE_COMPAT_HAS_JOURNAL is
+ set.
+ * - 0xD0
+ - \_\_u8
+ - s\_journal\_uuid[16]
+ - UUID of journal superblock
+ * - 0xE0
+ - \_\_le32
+ - s\_journal\_inum
+ - inode number of journal file.
+ * - 0xE4
+ - \_\_le32
+ - s\_journal\_dev
+ - Device number of journal file, if the external journal feature flag is
+ set.
+ * - 0xE8
+ - \_\_le32
+ - s\_last\_orphan
+ - Start of list of orphaned inodes to delete.
+ * - 0xEC
+ - \_\_le32
+ - s\_hash\_seed[4]
+ - HTREE hash seed.
+ * - 0xFC
+ - \_\_u8
+ - s\_def\_hash\_version
+ - Default hash algorithm to use for directory hashes. See super_def_hash_
+ for more info.
+ * - 0xFD
+ - \_\_u8
+ - s\_jnl\_backup\_type
+ - If this value is 0 or EXT3\_JNL\_BACKUP\_BLOCKS (1), then the
+ ``s_jnl_blocks`` field contains a duplicate copy of the inode's
+ ``i_block[]`` array and ``i_size``.
+ * - 0xFE
+ - \_\_le16
+ - s\_desc\_size
+ - Size of group descriptors, in bytes, if the 64bit incompat feature flag
+ is set.
+ * - 0x100
+ - \_\_le32
+ - s\_default\_mount\_opts
+ - Default mount options. See the super_mountopts_ table for more info.
+ * - 0x104
+ - \_\_le32
+ - s\_first\_meta\_bg
+ - First metablock block group, if the meta\_bg feature is enabled.
+ * - 0x108
+ - \_\_le32
+ - s\_mkfs\_time
+ - When the filesystem was created, in seconds since the epoch.
+ * - 0x10C
+ - \_\_le32
+ - s\_jnl\_blocks[17]
+ - Backup copy of the journal inode's ``i_block[]`` array in the first 15
+ elements and i\_size\_high and i\_size in the 16th and 17th elements,
+ respectively.
+ * -
+ -
+ -
+ - 64bit support is valid only if EXT4_FEATURE_COMPAT_64BIT is set.
+ * - 0x150
+ - \_\_le32
+ - s\_blocks\_count\_hi
+ - High 32-bits of the block count.
+ * - 0x154
+ - \_\_le32
+ - s\_r\_blocks\_count\_hi
+ - High 32-bits of the reserved block count.
+ * - 0x158
+ - \_\_le32
+ - s\_free\_blocks\_count\_hi
+ - High 32-bits of the free block count.
+ * - 0x15C
+ - \_\_le16
+ - s\_min\_extra\_isize
+ - All inodes have at least # bytes.
+ * - 0x15E
+ - \_\_le16
+ - s\_want\_extra\_isize
+ - New inodes should reserve # bytes.
+ * - 0x160
+ - \_\_le32
+ - s\_flags
+ - Miscellaneous flags. See the super_flags_ table for more info.
+ * - 0x164
+ - \_\_le16
+ - s\_raid\_stride
+ - RAID stride. This is the number of logical blocks read from or written
+ to the disk before moving to the next disk. This affects the placement
+ of filesystem metadata, which will hopefully make RAID storage faster.
+ * - 0x166
+ - \_\_le16
+ - s\_mmp\_interval
+ - #. seconds to wait in multi-mount prevention (MMP) checking. In theory,
+ MMP is a mechanism to record in the superblock which host and device
+ have mounted the filesystem, in order to prevent multiple mounts. This
+ feature does not seem to be implemented...
+ * - 0x168
+ - \_\_le64
+ - s\_mmp\_block
+ - Block # for multi-mount protection data.
+ * - 0x170
+ - \_\_le32
+ - s\_raid\_stripe\_width
+ - RAID stripe width. This is the number of logical blocks read from or
+ written to the disk before coming back to the current disk. This is used
+ by the block allocator to try to reduce the number of read-modify-write
+ operations in a RAID5/6.
+ * - 0x174
+ - \_\_u8
+ - s\_log\_groups\_per\_flex
+ - Size of a flexible block group is 2 ^ ``s_log_groups_per_flex``.
+ * - 0x175
+ - \_\_u8
+ - s\_checksum\_type
+ - Metadata checksum algorithm type. The only valid value is 1 (crc32c).
+ * - 0x176
+ - \_\_le16
+ - s\_reserved\_pad
+ -
+ * - 0x178
+ - \_\_le64
+ - s\_kbytes\_written
+ - Number of KiB written to this filesystem over its lifetime.
+ * - 0x180
+ - \_\_le32
+ - s\_snapshot\_inum
+ - inode number of active snapshot. (Not used in e2fsprogs/Linux.)
+ * - 0x184
+ - \_\_le32
+ - s\_snapshot\_id
+ - Sequential ID of active snapshot. (Not used in e2fsprogs/Linux.)
+ * - 0x188
+ - \_\_le64
+ - s\_snapshot\_r\_blocks\_count
+ - Number of blocks reserved for active snapshot's future use. (Not used in
+ e2fsprogs/Linux.)
+ * - 0x190
+ - \_\_le32
+ - s\_snapshot\_list
+ - inode number of the head of the on-disk snapshot list. (Not used in
+ e2fsprogs/Linux.)
+ * - 0x194
+ - \_\_le32
+ - s\_error\_count
+ - Number of errors seen.
+ * - 0x198
+ - \_\_le32
+ - s\_first\_error\_time
+ - First time an error happened, in seconds since the epoch.
+ * - 0x19C
+ - \_\_le32
+ - s\_first\_error\_ino
+ - inode involved in first error.
+ * - 0x1A0
+ - \_\_le64
+ - s\_first\_error\_block
+ - Number of block involved of first error.
+ * - 0x1A8
+ - \_\_u8
+ - s\_first\_error\_func[32]
+ - Name of function where the error happened.
+ * - 0x1C8
+ - \_\_le32
+ - s\_first\_error\_line
+ - Line number where error happened.
+ * - 0x1CC
+ - \_\_le32
+ - s\_last\_error\_time
+ - Time of most recent error, in seconds since the epoch.
+ * - 0x1D0
+ - \_\_le32
+ - s\_last\_error\_ino
+ - inode involved in most recent error.
+ * - 0x1D4
+ - \_\_le32
+ - s\_last\_error\_line
+ - Line number where most recent error happened.
+ * - 0x1D8
+ - \_\_le64
+ - s\_last\_error\_block
+ - Number of block involved in most recent error.
+ * - 0x1E0
+ - \_\_u8
+ - s\_last\_error\_func[32]
+ - Name of function where the most recent error happened.
+ * - 0x200
+ - \_\_u8
+ - s\_mount\_opts[64]
+ - ASCIIZ string of mount options.
+ * - 0x240
+ - \_\_le32
+ - s\_usr\_quota\_inum
+ - Inode number of user `quota <quota>`__ file.
+ * - 0x244
+ - \_\_le32
+ - s\_grp\_quota\_inum
+ - Inode number of group `quota <quota>`__ file.
+ * - 0x248
+ - \_\_le32
+ - s\_overhead\_blocks
+ - Overhead blocks/clusters in fs. (Huh? This field is always zero, which
+ means that the kernel calculates it dynamically.)
+ * - 0x24C
+ - \_\_le32
+ - s\_backup\_bgs[2]
+ - Block groups containing superblock backups (if sparse\_super2)
+ * - 0x254
+ - \_\_u8
+ - s\_encrypt\_algos[4]
+ - Encryption algorithms in use. There can be up to four algorithms in use
+ at any time; valid algorithm codes are given in the super_encrypt_ table
+ below.
+ * - 0x258
+ - \_\_u8
+ - s\_encrypt\_pw\_salt[16]
+ - Salt for the string2key algorithm for encryption.
+ * - 0x268
+ - \_\_le32
+ - s\_lpf\_ino
+ - Inode number of lost+found
+ * - 0x26C
+ - \_\_le32
+ - s\_prj\_quota\_inum
+ - Inode that tracks project quotas.
+ * - 0x270
+ - \_\_le32
+ - s\_checksum\_seed
+ - Checksum seed used for metadata\_csum calculations. This value is
+ crc32c(~0, $orig\_fs\_uuid).
+ * - 0x274
+ - \_\_u8
+ - s\_wtime_hi
+ - Upper 8 bits of the s_wtime field.
+ * - 0x275
+ - \_\_u8
+ - s\_wtime_hi
+ - Upper 8 bits of the s_mtime field.
+ * - 0x276
+ - \_\_u8
+ - s\_mkfs_time_hi
+ - Upper 8 bits of the s_mkfs_time field.
+ * - 0x277
+ - \_\_u8
+ - s\_lastcheck_hi
+ - Upper 8 bits of the s_lastcheck_hi field.
+ * - 0x278
+ - \_\_u8
+ - s\_first_error_time_hi
+ - Upper 8 bits of the s_first_error_time_hi field.
+ * - 0x279
+ - \_\_u8
+ - s\_last_error_time_hi
+ - Upper 8 bits of the s_last_error_time_hi field.
+ * - 0x27A
+ - \_\_u8[2]
+ - s\_pad
+ - Zero padding.
+ * - 0x27C
+ - \_\_le32
+ - s\_reserved[96]
+ - Padding to the end of the block.
+ * - 0x3FC
+ - \_\_le32
+ - s\_checksum
+ - Superblock checksum.
+
+.. _super_state:
+
+The superblock state is some combination of the following:
+
+.. list-table::
+ :widths: 1 79
+ :header-rows: 1
+
+ * - Value
+ - Description
+ * - 0x0001
+ - Cleanly umounted
+ * - 0x0002
+ - Errors detected
+ * - 0x0004
+ - Orphans being recovered
+
+.. _super_errors:
+
+The superblock error policy is one of the following:
+
+.. list-table::
+ :widths: 1 79
+ :header-rows: 1
+
+ * - Value
+ - Description
+ * - 1
+ - Continue
+ * - 2
+ - Remount read-only
+ * - 3
+ - Panic
+
+.. _super_creator:
+
+The filesystem creator is one of the following:
+
+.. list-table::
+ :widths: 1 79
+ :header-rows: 1
+
+ * - Value
+ - Description
+ * - 0
+ - Linux
+ * - 1
+ - Hurd
+ * - 2
+ - Masix
+ * - 3
+ - FreeBSD
+ * - 4
+ - Lites
+
+.. _super_revision:
+
+The superblock revision is one of the following:
+
+.. list-table::
+ :widths: 1 79
+ :header-rows: 1
+
+ * - Value
+ - Description
+ * - 0
+ - Original format
+ * - 1
+ - v2 format w/ dynamic inode sizes
+
+Note that ``EXT4_DYNAMIC_REV`` refers to a revision 1 or newer filesystem.
+
+.. _super_compat:
+
+The superblock compatible features field is a combination of any of the
+following:
+
+.. list-table::
+ :widths: 1 79
+ :header-rows: 1
+
+ * - Value
+ - Description
+ * - 0x1
+ - Directory preallocation (COMPAT\_DIR\_PREALLOC).
+ * - 0x2
+ - “imagic inodes”. Not clear from the code what this does
+ (COMPAT\_IMAGIC\_INODES).
+ * - 0x4
+ - Has a journal (COMPAT\_HAS\_JOURNAL).
+ * - 0x8
+ - Supports extended attributes (COMPAT\_EXT\_ATTR).
+ * - 0x10
+ - Has reserved GDT blocks for filesystem expansion
+ (COMPAT\_RESIZE\_INODE). Requires RO\_COMPAT\_SPARSE\_SUPER.
+ * - 0x20
+ - Has directory indices (COMPAT\_DIR\_INDEX).
+ * - 0x40
+ - “Lazy BG”. Not in Linux kernel, seems to have been for uninitialized
+ block groups? (COMPAT\_LAZY\_BG)
+ * - 0x80
+ - “Exclude inode”. Not used. (COMPAT\_EXCLUDE\_INODE).
+ * - 0x100
+ - “Exclude bitmap”. Seems to be used to indicate the presence of
+ snapshot-related exclude bitmaps? Not defined in kernel or used in
+ e2fsprogs (COMPAT\_EXCLUDE\_BITMAP).
+ * - 0x200
+ - Sparse Super Block, v2. If this flag is set, the SB field s\_backup\_bgs
+ points to the two block groups that contain backup superblocks
+ (COMPAT\_SPARSE\_SUPER2).
+
+.. _super_incompat:
+
+The superblock incompatible features field is a combination of any of the
+following:
+
+.. list-table::
+ :widths: 1 79
+ :header-rows: 1
+
+ * - Value
+ - Description
+ * - 0x1
+ - Compression (INCOMPAT\_COMPRESSION).
+ * - 0x2
+ - Directory entries record the file type. See ext4\_dir\_entry\_2 below
+ (INCOMPAT\_FILETYPE).
+ * - 0x4
+ - Filesystem needs recovery (INCOMPAT\_RECOVER).
+ * - 0x8
+ - Filesystem has a separate journal device (INCOMPAT\_JOURNAL\_DEV).
+ * - 0x10
+ - Meta block groups. See the earlier discussion of this feature
+ (INCOMPAT\_META\_BG).
+ * - 0x40
+ - Files in this filesystem use extents (INCOMPAT\_EXTENTS).
+ * - 0x80
+ - Enable a filesystem size of 2^64 blocks (INCOMPAT\_64BIT).
+ * - 0x100
+ - Multiple mount protection. Not implemented (INCOMPAT\_MMP).
+ * - 0x200
+ - Flexible block groups. See the earlier discussion of this feature
+ (INCOMPAT\_FLEX\_BG).
+ * - 0x400
+ - Inodes can be used to store large extended attribute values
+ (INCOMPAT\_EA\_INODE).
+ * - 0x1000
+ - Data in directory entry (INCOMPAT\_DIRDATA). (Not implemented?)
+ * - 0x2000
+ - Metadata checksum seed is stored in the superblock. This feature enables
+ the administrator to change the UUID of a metadata\_csum filesystem
+ while the filesystem is mounted; without it, the checksum definition
+ requires all metadata blocks to be rewritten (INCOMPAT\_CSUM\_SEED).
+ * - 0x4000
+ - Large directory >2GB or 3-level htree (INCOMPAT\_LARGEDIR). Prior to
+ this feature, directories could not be larger than 4GiB and could not
+ have an htree more than 2 levels deep. If this feature is enabled,
+ directories can be larger than 4GiB and have a maximum htree depth of 3.
+ * - 0x8000
+ - Data in inode (INCOMPAT\_INLINE\_DATA).
+ * - 0x10000
+ - Encrypted inodes are present on the filesystem. (INCOMPAT\_ENCRYPT).
+
+.. _super_rocompat:
+
+The superblock read-only compatible features field is a combination of any of
+the following:
+
+.. list-table::
+ :widths: 1 79
+ :header-rows: 1
+
+ * - Value
+ - Description
+ * - 0x1
+ - Sparse superblocks. See the earlier discussion of this feature
+ (RO\_COMPAT\_SPARSE\_SUPER).
+ * - 0x2
+ - This filesystem has been used to store a file greater than 2GiB
+ (RO\_COMPAT\_LARGE\_FILE).
+ * - 0x4
+ - Not used in kernel or e2fsprogs (RO\_COMPAT\_BTREE\_DIR).
+ * - 0x8
+ - This filesystem has files whose sizes are represented in units of
+ logical blocks, not 512-byte sectors. This implies a very large file
+ indeed! (RO\_COMPAT\_HUGE\_FILE)
+ * - 0x10
+ - Group descriptors have checksums. In addition to detecting corruption,
+ this is useful for lazy formatting with uninitialized groups
+ (RO\_COMPAT\_GDT\_CSUM).
+ * - 0x20
+ - Indicates that the old ext3 32,000 subdirectory limit no longer applies
+ (RO\_COMPAT\_DIR\_NLINK). A directory's i\_links\_count will be set to 1
+ if it is incremented past 64,999.
+ * - 0x40
+ - Indicates that large inodes exist on this filesystem
+ (RO\_COMPAT\_EXTRA\_ISIZE).
+ * - 0x80
+ - This filesystem has a snapshot (RO\_COMPAT\_HAS\_SNAPSHOT).
+ * - 0x100
+ - `Quota <Quota>`__ (RO\_COMPAT\_QUOTA).
+ * - 0x200
+ - This filesystem supports “bigalloc”, which means that file extents are
+ tracked in units of clusters (of blocks) instead of blocks
+ (RO\_COMPAT\_BIGALLOC).
+ * - 0x400
+ - This filesystem supports metadata checksumming.
+ (RO\_COMPAT\_METADATA\_CSUM; implies RO\_COMPAT\_GDT\_CSUM, though
+ GDT\_CSUM must not be set)
+ * - 0x800
+ - Filesystem supports replicas. This feature is neither in the kernel nor
+ e2fsprogs. (RO\_COMPAT\_REPLICA)
+ * - 0x1000
+ - Read-only filesystem image; the kernel will not mount this image
+ read-write and most tools will refuse to write to the image.
+ (RO\_COMPAT\_READONLY)
+ * - 0x2000
+ - Filesystem tracks project quotas. (RO\_COMPAT\_PROJECT)
+
+.. _super_def_hash:
+
+The ``s_def_hash_version`` field is one of the following:
+
+.. list-table::
+ :widths: 1 79
+ :header-rows: 1
+
+ * - Value
+ - Description
+ * - 0x0
+ - Legacy.
+ * - 0x1
+ - Half MD4.
+ * - 0x2
+ - Tea.
+ * - 0x3
+ - Legacy, unsigned.
+ * - 0x4
+ - Half MD4, unsigned.
+ * - 0x5
+ - Tea, unsigned.
+
+.. _super_mountopts:
+
+The ``s_default_mount_opts`` field is any combination of the following:
+
+.. list-table::
+ :widths: 1 79
+ :header-rows: 1
+
+ * - Value
+ - Description
+ * - 0x0001
+ - Print debugging info upon (re)mount. (EXT4\_DEFM\_DEBUG)
+ * - 0x0002
+ - New files take the gid of the containing directory (instead of the fsgid
+ of the current process). (EXT4\_DEFM\_BSDGROUPS)
+ * - 0x0004
+ - Support userspace-provided extended attributes. (EXT4\_DEFM\_XATTR\_USER)
+ * - 0x0008
+ - Support POSIX access control lists (ACLs). (EXT4\_DEFM\_ACL)
+ * - 0x0010
+ - Do not support 32-bit UIDs. (EXT4\_DEFM\_UID16)
+ * - 0x0020
+ - All data and metadata are commited to the journal.
+ (EXT4\_DEFM\_JMODE\_DATA)
+ * - 0x0040
+ - All data are flushed to the disk before metadata are committed to the
+ journal. (EXT4\_DEFM\_JMODE\_ORDERED)
+ * - 0x0060
+ - Data ordering is not preserved; data may be written after the metadata
+ has been written. (EXT4\_DEFM\_JMODE\_WBACK)
+ * - 0x0100
+ - Disable write flushes. (EXT4\_DEFM\_NOBARRIER)
+ * - 0x0200
+ - Track which blocks in a filesystem are metadata and therefore should not
+ be used as data blocks. This option will be enabled by default on 3.18,
+ hopefully. (EXT4\_DEFM\_BLOCK\_VALIDITY)
+ * - 0x0400
+ - Enable DISCARD support, where the storage device is told about blocks
+ becoming unused. (EXT4\_DEFM\_DISCARD)
+ * - 0x0800
+ - Disable delayed allocation. (EXT4\_DEFM\_NODELALLOC)
+
+.. _super_flags:
+
+The ``s_flags`` field is any combination of the following:
+
+.. list-table::
+ :widths: 1 79
+ :header-rows: 1
+
+ * - Value
+ - Description
+ * - 0x0001
+ - Signed directory hash in use.
+ * - 0x0002
+ - Unsigned directory hash in use.
+ * - 0x0004
+ - To test development code.
+
+.. _super_encrypt:
+
+The ``s_encrypt_algos`` list can contain any of the following:
+
+.. list-table::
+ :widths: 1 79
+ :header-rows: 1
+
+ * - Value
+ - Description
+ * - 0
+ - Invalid algorithm (ENCRYPTION\_MODE\_INVALID).
+ * - 1
+ - 256-bit AES in XTS mode (ENCRYPTION\_MODE\_AES\_256\_XTS).
+ * - 2
+ - 256-bit AES in GCM mode (ENCRYPTION\_MODE\_AES\_256\_GCM).
+ * - 3
+ - 256-bit AES in CBC mode (ENCRYPTION\_MODE\_AES\_256\_CBC).
+
+Total size of the superblock is 1024 bytes.