summaryrefslogtreecommitdiff
path: root/Documentation/i2c/busses
diff options
context:
space:
mode:
authorAndrea Gelmini <andrea.gelmini@gelma.net>2010-06-03 13:33:50 +0400
committerJean Delvare <khali@linux-fr.org>2010-06-03 13:33:50 +0400
commit89140f41575ae2a7a5c24e856880594ccbdfcaff (patch)
treebb8d9a24a727d95d4664ea23ff7450503cfe5f18 /Documentation/i2c/busses
parentaef4b9aaae1decc775778903922bd0075cce7a88 (diff)
downloadlinux-89140f41575ae2a7a5c24e856880594ccbdfcaff.tar.xz
Documentation/i2c: Checkpatch cleanup
Remove all trailing whitespace in Documentation/i2c. Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Diffstat (limited to 'Documentation/i2c/busses')
-rw-r--r--Documentation/i2c/busses/i2c-ali15354
-rw-r--r--Documentation/i2c/busses/i2c-ali15632
-rw-r--r--Documentation/i2c/busses/i2c-ali15x316
-rw-r--r--Documentation/i2c/busses/i2c-pca-isa14
-rw-r--r--Documentation/i2c/busses/i2c-sis559558
-rw-r--r--Documentation/i2c/busses/i2c-sis6308
6 files changed, 51 insertions, 51 deletions
diff --git a/Documentation/i2c/busses/i2c-ali1535 b/Documentation/i2c/busses/i2c-ali1535
index 0db3b4c74ad1..acbc65a08097 100644
--- a/Documentation/i2c/busses/i2c-ali1535
+++ b/Documentation/i2c/busses/i2c-ali1535
@@ -6,12 +6,12 @@ Supported adapters:
http://www.ali.com.tw/eng/support/datasheet_request.php
Authors:
- Frodo Looijaard <frodol@dds.nl>,
+ Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>,
Mark D. Studebaker <mdsxyz123@yahoo.com>,
Dan Eaton <dan.eaton@rocketlogix.com>,
Stephen Rousset<stephen.rousset@rocketlogix.com>
-
+
Description
-----------
diff --git a/Documentation/i2c/busses/i2c-ali1563 b/Documentation/i2c/busses/i2c-ali1563
index 99ad4b9bcc32..54691698d2dd 100644
--- a/Documentation/i2c/busses/i2c-ali1563
+++ b/Documentation/i2c/busses/i2c-ali1563
@@ -18,7 +18,7 @@ For an overview of these chips see http://www.acerlabs.com
The M1563 southbridge is deceptively similar to the M1533, with a few
notable exceptions. One of those happens to be the fact they upgraded the
i2c core to be SMBus 2.0 compliant, and happens to be almost identical to
-the i2c controller found in the Intel 801 south bridges.
+the i2c controller found in the Intel 801 south bridges.
Features
--------
diff --git a/Documentation/i2c/busses/i2c-ali15x3 b/Documentation/i2c/busses/i2c-ali15x3
index ff28d381bebe..600da90b8f12 100644
--- a/Documentation/i2c/busses/i2c-ali15x3
+++ b/Documentation/i2c/busses/i2c-ali15x3
@@ -6,8 +6,8 @@ Supported adapters:
http://www.ali.com.tw/eng/support/datasheet_request.php
Authors:
- Frodo Looijaard <frodol@dds.nl>,
- Philip Edelbrock <phil@netroedge.com>,
+ Frodo Looijaard <frodol@dds.nl>,
+ Philip Edelbrock <phil@netroedge.com>,
Mark D. Studebaker <mdsxyz123@yahoo.com>
Module Parameters
@@ -40,10 +40,10 @@ M1541 and M1543C South Bridges.
The M1543C is a South bridge for desktop systems.
The M1541 is a South bridge for portable systems.
They are part of the following ALI chipsets:
-
- * "Aladdin Pro 2" includes the M1621 Slot 1 North bridge with AGP and
+
+ * "Aladdin Pro 2" includes the M1621 Slot 1 North bridge with AGP and
100MHz CPU Front Side bus
- * "Aladdin V" includes the M1541 Socket 7 North bridge with AGP and 100MHz
+ * "Aladdin V" includes the M1541 Socket 7 North bridge with AGP and 100MHz
CPU Front Side bus
Some Aladdin V motherboards:
Asus P5A
@@ -77,7 +77,7 @@ output of lspci will show something similar to the following:
** then run lspci.
** If you see the 1533 and 5229 devices but NOT the 7101 device,
** then you must enable ACPI, the PMU, SMB, or something similar
-** in the BIOS.
+** in the BIOS.
** The driver won't work if it can't find the M7101 device.
The SMB controller is part of the M7101 device, which is an ACPI-compliant
@@ -87,8 +87,8 @@ The whole M7101 device has to be enabled for the SMB to work. You can't
just enable the SMB alone. The SMB and the ACPI have separate I/O spaces.
We make sure that the SMB is enabled. We leave the ACPI alone.
-Features
---------
+Features
+--------
This driver controls the SMB Host only. The SMB Slave
controller on the M15X3 is not enabled. This driver does not use
diff --git a/Documentation/i2c/busses/i2c-pca-isa b/Documentation/i2c/busses/i2c-pca-isa
index 6fc8f4c27c3c..b044e5265488 100644
--- a/Documentation/i2c/busses/i2c-pca-isa
+++ b/Documentation/i2c/busses/i2c-pca-isa
@@ -1,10 +1,10 @@
Kernel driver i2c-pca-isa
Supported adapters:
-This driver supports ISA boards using the Philips PCA 9564
-Parallel bus to I2C bus controller
+This driver supports ISA boards using the Philips PCA 9564
+Parallel bus to I2C bus controller
-Author: Ian Campbell <icampbell@arcom.com>, Arcom Control Systems
+Author: Ian Campbell <icampbell@arcom.com>, Arcom Control Systems
Module Parameters
-----------------
@@ -12,12 +12,12 @@ Module Parameters
* base int
I/O base address
* irq int
- IRQ interrupt
-* clock int
+ IRQ interrupt
+* clock int
Clock rate as described in table 1 of PCA9564 datasheet
Description
-----------
-This driver supports ISA boards using the Philips PCA 9564
-Parallel bus to I2C bus controller
+This driver supports ISA boards using the Philips PCA 9564
+Parallel bus to I2C bus controller
diff --git a/Documentation/i2c/busses/i2c-sis5595 b/Documentation/i2c/busses/i2c-sis5595
index cc47db7d00a9..ecd21fb49a8f 100644
--- a/Documentation/i2c/busses/i2c-sis5595
+++ b/Documentation/i2c/busses/i2c-sis5595
@@ -1,41 +1,41 @@
Kernel driver i2c-sis5595
-Authors:
+Authors:
Frodo Looijaard <frodol@dds.nl>,
Mark D. Studebaker <mdsxyz123@yahoo.com>,
- Philip Edelbrock <phil@netroedge.com>
+ Philip Edelbrock <phil@netroedge.com>
Supported adapters:
* Silicon Integrated Systems Corp. SiS5595 Southbridge
Datasheet: Publicly available at the Silicon Integrated Systems Corp. site.
-Note: all have mfr. ID 0x1039.
-
- SUPPORTED PCI ID
- 5595 0008
-
- Note: these chips contain a 0008 device which is incompatible with the
- 5595. We recognize these by the presence of the listed
- "blacklist" PCI ID and refuse to load.
-
- NOT SUPPORTED PCI ID BLACKLIST PCI ID
- 540 0008 0540
- 550 0008 0550
- 5513 0008 5511
- 5581 0008 5597
- 5582 0008 5597
- 5597 0008 5597
- 5598 0008 5597/5598
- 630 0008 0630
- 645 0008 0645
- 646 0008 0646
- 648 0008 0648
- 650 0008 0650
- 651 0008 0651
- 730 0008 0730
- 735 0008 0735
- 745 0008 0745
- 746 0008 0746
+Note: all have mfr. ID 0x1039.
+
+ SUPPORTED PCI ID
+ 5595 0008
+
+ Note: these chips contain a 0008 device which is incompatible with the
+ 5595. We recognize these by the presence of the listed
+ "blacklist" PCI ID and refuse to load.
+
+ NOT SUPPORTED PCI ID BLACKLIST PCI ID
+ 540 0008 0540
+ 550 0008 0550
+ 5513 0008 5511
+ 5581 0008 5597
+ 5582 0008 5597
+ 5597 0008 5597
+ 5598 0008 5597/5598
+ 630 0008 0630
+ 645 0008 0645
+ 646 0008 0646
+ 648 0008 0648
+ 650 0008 0650
+ 651 0008 0651
+ 730 0008 0730
+ 735 0008 0735
+ 745 0008 0745
+ 746 0008 0746
Module Parameters
-----------------
diff --git a/Documentation/i2c/busses/i2c-sis630 b/Documentation/i2c/busses/i2c-sis630
index 9aca6889f748..629ea2c356fd 100644
--- a/Documentation/i2c/busses/i2c-sis630
+++ b/Documentation/i2c/busses/i2c-sis630
@@ -14,9 +14,9 @@ Module Parameters
* force = [1|0] Forcibly enable the SIS630. DANGEROUS!
This can be interesting for chipsets not named
above to check if it works for you chipset, but DANGEROUS!
-
-* high_clock = [1|0] Forcibly set Host Master Clock to 56KHz (default,
- what your BIOS use). DANGEROUS! This should be a bit
+
+* high_clock = [1|0] Forcibly set Host Master Clock to 56KHz (default,
+ what your BIOS use). DANGEROUS! This should be a bit
faster, but freeze some systems (i.e. my Laptop).
@@ -44,6 +44,6 @@ Philip Edelbrock <phil@netroedge.com>
- testing SiS730 support
Mark M. Hoffman <mhoffman@lightlink.com>
- bug fixes
-
+
To anyone else which I forgot here ;), thanks!