summaryrefslogtreecommitdiff
path: root/Documentation/i2c
diff options
context:
space:
mode:
authorWolfram Sang <wsa+renesas@sang-engineering.com>2019-11-06 12:50:19 +0300
committerWolfram Sang <wsa@the-dreams.de>2019-11-28 19:15:21 +0300
commitc1d084759c95ecd0ef08274654a1f6c4f343cdcd (patch)
tree6a2aef1231031772f0634fdb81909e23159fab9d /Documentation/i2c
parent1b00ff61597e7b5758372ded5134f673dddc1831 (diff)
downloadlinux-c1d084759c95ecd0ef08274654a1f6c4f343cdcd.tar.xz
i2c: replace i2c_new_probed_device with an ERR_PTR variant
In the general move to have i2c_new_*_device functions which return ERR_PTR instead of NULL, this patch converts i2c_new_probed_device(). There are only few users, so this patch converts the I2C core and all users in one go. The function gets renamed to i2c_new_scanned_device() so out-of-tree users will get a build failure to understand they need to adapt their error checking code. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Max Staudt <max@enpas.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Diffstat (limited to 'Documentation/i2c')
-rw-r--r--Documentation/i2c/instantiating-devices.rst10
-rw-r--r--Documentation/i2c/writing-clients.rst8
2 files changed, 9 insertions, 9 deletions
diff --git a/Documentation/i2c/instantiating-devices.rst b/Documentation/i2c/instantiating-devices.rst
index 1238f1fa3382..875ebe9e78e3 100644
--- a/Documentation/i2c/instantiating-devices.rst
+++ b/Documentation/i2c/instantiating-devices.rst
@@ -123,7 +123,7 @@ present or not (for example for an optional feature which is not present
on cheap variants of a board but you have no way to tell them apart), or
it may have different addresses from one board to the next (manufacturer
changing its design without notice). In this case, you can call
-i2c_new_probed_device() instead of i2c_new_device().
+i2c_new_scanned_device() instead of i2c_new_device().
Example (from the nxp OHCI driver)::
@@ -139,8 +139,8 @@ Example (from the nxp OHCI driver)::
i2c_adap = i2c_get_adapter(2);
memset(&i2c_info, 0, sizeof(struct i2c_board_info));
strscpy(i2c_info.type, "isp1301_nxp", sizeof(i2c_info.type));
- isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info,
- normal_i2c, NULL);
+ isp1301_i2c_client = i2c_new_scanned_device(i2c_adap, &i2c_info,
+ normal_i2c, NULL);
i2c_put_adapter(i2c_adap);
(...)
}
@@ -153,14 +153,14 @@ simply gives up.
The driver which instantiated the I2C device is responsible for destroying
it on cleanup. This is done by calling i2c_unregister_device() on the
pointer that was earlier returned by i2c_new_device() or
-i2c_new_probed_device().
+i2c_new_scanned_device().
Method 3: Probe an I2C bus for certain devices
----------------------------------------------
Sometimes you do not have enough information about an I2C device, not even
-to call i2c_new_probed_device(). The typical case is hardware monitoring
+to call i2c_new_scanned_device(). The typical case is hardware monitoring
chips on PC mainboards. There are several dozen models, which can live
at 25 different addresses. Given the huge number of mainboards out there,
it is next to impossible to build an exhaustive list of the hardware
diff --git a/Documentation/i2c/writing-clients.rst b/Documentation/i2c/writing-clients.rst
index dddf0a14ab7c..ced309b5e0cc 100644
--- a/Documentation/i2c/writing-clients.rst
+++ b/Documentation/i2c/writing-clients.rst
@@ -185,14 +185,14 @@ Sometimes you know that a device is connected to a given I2C bus, but you
don't know the exact address it uses. This happens on TV adapters for
example, where the same driver supports dozens of slightly different
models, and I2C device addresses change from one model to the next. In
-that case, you can use the i2c_new_probed_device() variant, which is
+that case, you can use the i2c_new_scanned_device() variant, which is
similar to i2c_new_device(), except that it takes an additional list of
possible I2C addresses to probe. A device is created for the first
responsive address in the list. If you expect more than one device to be
-present in the address range, simply call i2c_new_probed_device() that
+present in the address range, simply call i2c_new_scanned_device() that
many times.
-The call to i2c_new_device() or i2c_new_probed_device() typically happens
+The call to i2c_new_device() or i2c_new_scanned_device() typically happens
in the I2C bus driver. You may want to save the returned i2c_client
reference for later use.
@@ -237,7 +237,7 @@ Device Deletion
---------------
Each I2C device which has been created using i2c_new_device() or
-i2c_new_probed_device() can be unregistered by calling
+i2c_new_scanned_device() can be unregistered by calling
i2c_unregister_device(). If you don't call it explicitly, it will be
called automatically before the underlying I2C bus itself is removed, as a
device can't survive its parent in the device driver model.