summaryrefslogtreecommitdiff
path: root/Documentation/media
diff options
context:
space:
mode:
authorMauro Carvalho Chehab <mchehab@s-opensource.com>2017-09-19 23:54:15 +0300
committerMauro Carvalho Chehab <mchehab@s-opensource.com>2017-10-11 20:05:44 +0300
commit5b3b8c81b47aa3ca473d310b1aa3ab93f0ec9c6b (patch)
tree477b93e92245ef0a28558322cec1eacc5e92e171 /Documentation/media
parent7af90c04cc8343fb8063d0b3d7ba135daf3aabde (diff)
downloadlinux-5b3b8c81b47aa3ca473d310b1aa3ab93f0ec9c6b.tar.xz
media: dtv-core.rst: split into multiple files
Instead of document all kAPI into a single file, split it on multiple ones. That makes easier to maintain each part. As a side effect, it will produce multiple html pages, with is a good idea. No changes at the text. Just some chapter levels changed. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Diffstat (limited to 'Documentation/media')
-rw-r--r--Documentation/media/kapi/dtv-ca.rst4
-rw-r--r--Documentation/media/kapi/dtv-common.rst55
-rw-r--r--Documentation/media/kapi/dtv-core.rst585
-rw-r--r--Documentation/media/kapi/dtv-demux.rst71
-rw-r--r--Documentation/media/kapi/dtv-frontend.rst443
5 files changed, 579 insertions, 579 deletions
diff --git a/Documentation/media/kapi/dtv-ca.rst b/Documentation/media/kapi/dtv-ca.rst
new file mode 100644
index 000000000000..a4dd700189b0
--- /dev/null
+++ b/Documentation/media/kapi/dtv-ca.rst
@@ -0,0 +1,4 @@
+Digital TV Conditional Access kABI
+----------------------------------
+
+.. kernel-doc:: drivers/media/dvb-core/dvb_ca_en50221.h
diff --git a/Documentation/media/kapi/dtv-common.rst b/Documentation/media/kapi/dtv-common.rst
new file mode 100644
index 000000000000..40cf1033b5e1
--- /dev/null
+++ b/Documentation/media/kapi/dtv-common.rst
@@ -0,0 +1,55 @@
+Digital TV Common functions
+---------------------------
+
+Math functions
+~~~~~~~~~~~~~~
+
+Provide some commonly-used math functions, usually required in order to
+estimate signal strength and signal to noise measurements in dB.
+
+.. kernel-doc:: drivers/media/dvb-core/dvb_math.h
+
+
+DVB devices
+~~~~~~~~~~~
+
+Those functions are responsible for handling the DVB device nodes.
+
+.. kernel-doc:: drivers/media/dvb-core/dvbdev.h
+
+Digital TV Ring buffer
+~~~~~~~~~~~~~~~~~~~~~~
+
+Those routines implement ring buffers used to handle digital TV data and
+copy it from/to userspace.
+
+.. note::
+
+ 1) For performance reasons read and write routines don't check buffer sizes
+ and/or number of bytes free/available. This has to be done before these
+ routines are called. For example:
+
+ .. code-block:: c
+
+ /* write @buflen: bytes */
+ free = dvb_ringbuffer_free(rbuf);
+ if (free >= buflen)
+ count = dvb_ringbuffer_write(rbuf, buffer, buflen);
+ else
+ /* do something */
+
+ /* read min. 1000, max. @bufsize: bytes */
+ avail = dvb_ringbuffer_avail(rbuf);
+ if (avail >= 1000)
+ count = dvb_ringbuffer_read(rbuf, buffer, min(avail, bufsize));
+ else
+ /* do something */
+
+ 2) If there is exactly one reader and one writer, there is no need
+ to lock read or write operations.
+ Two or more readers must be locked against each other.
+ Flushing the buffer counts as a read operation.
+ Resetting the buffer counts as a read and write operation.
+ Two or more writers must be locked against each other.
+
+.. kernel-doc:: drivers/media/dvb-core/dvb_ringbuffer.h
diff --git a/Documentation/media/kapi/dtv-core.rst b/Documentation/media/kapi/dtv-core.rst
index 4cf9cf63bafd..8ee384f61fa0 100644
--- a/Documentation/media/kapi/dtv-core.rst
+++ b/Documentation/media/kapi/dtv-core.rst
@@ -26,584 +26,11 @@ I2C bus.
abandoned standard, not used anymore) and ATSC version 3.0 current
proposals. Currently, the DVB subsystem doesn't implement those standards.
-Digital TV Common functions
----------------------------
-Math functions
-~~~~~~~~~~~~~~
+.. toctree::
+ :maxdepth: 1
-Provide some commonly-used math functions, usually required in order to
-estimate signal strength and signal to noise measurements in dB.
-
-.. kernel-doc:: drivers/media/dvb-core/dvb_math.h
-
-
-DVB devices
-~~~~~~~~~~~
-
-Those functions are responsible for handling the DVB device nodes.
-
-.. kernel-doc:: drivers/media/dvb-core/dvbdev.h
-
-Digital TV Ring buffer
-----------------------
-
-Those routines implement ring buffers used to handle digital TV data and
-copy it from/to userspace.
-
-.. note::
-
- 1) For performance reasons read and write routines don't check buffer sizes
- and/or number of bytes free/available. This has to be done before these
- routines are called. For example:
-
- .. code-block:: c
-
- /* write @buflen: bytes */
- free = dvb_ringbuffer_free(rbuf);
- if (free >= buflen)
- count = dvb_ringbuffer_write(rbuf, buffer, buflen);
- else
- /* do something */
-
- /* read min. 1000, max. @bufsize: bytes */
- avail = dvb_ringbuffer_avail(rbuf);
- if (avail >= 1000)
- count = dvb_ringbuffer_read(rbuf, buffer, min(avail, bufsize));
- else
- /* do something */
-
- 2) If there is exactly one reader and one writer, there is no need
- to lock read or write operations.
- Two or more readers must be locked against each other.
- Flushing the buffer counts as a read operation.
- Resetting the buffer counts as a read and write operation.
- Two or more writers must be locked against each other.
-
-.. kernel-doc:: drivers/media/dvb-core/dvb_ringbuffer.h
-
-
-Digital TV Frontend kABI
-------------------------
-
-Digital TV Frontend
-~~~~~~~~~~~~~~~~~~~
-
-The Digital TV Frontend kABI defines a driver-internal interface for
-registering low-level, hardware specific driver to a hardware independent
-frontend layer. It is only of interest for Digital TV device driver writers.
-The header file for this API is named ``dvb_frontend.h`` and located in
-``drivers/media/dvb-core``.
-
-Demodulator driver
-^^^^^^^^^^^^^^^^^^
-
-The demodulator driver is responsible to talk with the decoding part of the
-hardware. Such driver should implement :c:type:`dvb_frontend_ops`, with
-tells what type of digital TV standards are supported, and points to a
-series of functions that allow the DVB core to command the hardware via
-the code under ``drivers/media/dvb-core/dvb_frontend.c``.
-
-A typical example of such struct in a driver ``foo`` is::
-
- static struct dvb_frontend_ops foo_ops = {
- .delsys = { SYS_DVBT, SYS_DVBT2, SYS_DVBC_ANNEX_A },
- .info = {
- .name = "foo DVB-T/T2/C driver",
- .caps = FE_CAN_FEC_1_2 |
- FE_CAN_FEC_2_3 |
- FE_CAN_FEC_3_4 |
- FE_CAN_FEC_5_6 |
- FE_CAN_FEC_7_8 |
- FE_CAN_FEC_AUTO |
- FE_CAN_QPSK |
- FE_CAN_QAM_16 |
- FE_CAN_QAM_32 |
- FE_CAN_QAM_64 |
- FE_CAN_QAM_128 |
- FE_CAN_QAM_256 |
- FE_CAN_QAM_AUTO |
- FE_CAN_TRANSMISSION_MODE_AUTO |
- FE_CAN_GUARD_INTERVAL_AUTO |
- FE_CAN_HIERARCHY_AUTO |
- FE_CAN_MUTE_TS |
- FE_CAN_2G_MODULATION,
- .frequency_min = 42000000, /* Hz */
- .frequency_max = 1002000000, /* Hz */
- .symbol_rate_min = 870000,
- .symbol_rate_max = 11700000
- },
- .init = foo_init,
- .sleep = foo_sleep,
- .release = foo_release,
- .set_frontend = foo_set_frontend,
- .get_frontend = foo_get_frontend,
- .read_status = foo_get_status_and_stats,
- .tune = foo_tune,
- .i2c_gate_ctrl = foo_i2c_gate_ctrl,
- .get_frontend_algo = foo_get_algo,
- };
-
-A typical example of such struct in a driver ``bar`` meant to be used on
-Satellite TV reception is::
-
- static const struct dvb_frontend_ops bar_ops = {
- .delsys = { SYS_DVBS, SYS_DVBS2 },
- .info = {
- .name = "Bar DVB-S/S2 demodulator",
- .frequency_min = 500000, /* KHz */
- .frequency_max = 2500000, /* KHz */
- .frequency_stepsize = 0,
- .symbol_rate_min = 1000000,
- .symbol_rate_max = 45000000,
- .symbol_rate_tolerance = 500,
- .caps = FE_CAN_INVERSION_AUTO |
- FE_CAN_FEC_AUTO |
- FE_CAN_QPSK,
- },
- .init = bar_init,
- .sleep = bar_sleep,
- .release = bar_release,
- .set_frontend = bar_set_frontend,
- .get_frontend = bar_get_frontend,
- .read_status = bar_get_status_and_stats,
- .i2c_gate_ctrl = bar_i2c_gate_ctrl,
- .get_frontend_algo = bar_get_algo,
- .tune = bar_tune,
-
- /* Satellite-specific */
- .diseqc_send_master_cmd = bar_send_diseqc_msg,
- .diseqc_send_burst = bar_send_burst,
- .set_tone = bar_set_tone,
- .set_voltage = bar_set_voltage,
- };
-
-.. note::
-
- #) For satellite digital TV standards (DVB-S, DVB-S2, ISDB-S), the
- frequencies are specified in kHz, while, for terrestrial and cable
- standards, they're specified in Hz. Due to that, if the same frontend
- supports both types, you'll need to have two separate
- :c:type:`dvb_frontend_ops` structures, one for each standard.
- #) The ``.i2c_gate_ctrl`` field is present only when the hardware has
- allows controlling an I2C gate (either directly of via some GPIO pin),
- in order to remove the tuner from the I2C bus after a channel is
- tuned.
- #) All new drivers should implement the
- :ref:`DVBv5 statistics <dvbv5_stats>` via ``.read_status``.
- Yet, there are a number of callbacks meant to get statistics for
- signal strength, S/N and UCB. Those are there to provide backward
- compatibility with legacy applications that don't support the DVBv5
- API. Implementing those callbacks are optional. Those callbacks may be
- removed in the future, after we have all existing drivers supporting
- DVBv5 stats.
- #) Other callbacks are required for satellite TV standards, in order to
- control LNBf and DiSEqC: ``.diseqc_send_master_cmd``,
- ``.diseqc_send_burst``, ``.set_tone``, ``.set_voltage``.
-
-.. |delta| unicode:: U+00394
-
-The ``drivers/media/dvb-core/dvb_frontend.c`` has a kernel thread with is
-responsible for tuning the device. It supports multiple algoritms to
-detect a channel, as defined at enum :c:func:`dvbfe_algo`.
-
-The algorithm to be used is obtained via ``.get_frontend_algo``. If the driver
-doesn't fill its field at struct :c:type:`dvb_frontend_ops`, it will default to
-``DVBFE_ALGO_SW``, meaning that the dvb-core will do a zigzag when tuning,
-e. g. it will try first to use the specified center frequency ``f``,
-then, it will do ``f`` + |delta|, ``f`` - |delta|, ``f`` + 2 x |delta|,
-``f`` - 2 x |delta| and so on.
-
-If the hardware has internally a some sort of zigzag algorithm, you should
-define a ``.get_frontend_algo`` function that would return ``DVBFE_ALGO_HW``.
-
-.. note::
-
- The core frontend support also supports
- a third type (``DVBFE_ALGO_CUSTOM``), in order to allow the driver to
- define its own hardware-assisted algorithm. Very few hardware need to
- use it nowadays. Using ``DVBFE_ALGO_CUSTOM`` require to provide other
- function callbacks at struct :c:type:`dvb_frontend_ops`.
-
-Attaching frontend driver to the bridge driver
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Before using the Digital TV frontend core, the bridge driver should attach
-the frontend demod, tuner and SEC devices and call
-:c:func:`dvb_register_frontend()`,
-in order to register the new frontend at the subsystem. At device
-detach/removal, the bridge driver should call
-:c:func:`dvb_unregister_frontend()` to
-remove the frontend from the core and then :c:func:`dvb_frontend_detach()`
-to free the memory allocated by the frontend drivers.
-
-The drivers should also call :c:func:`dvb_frontend_suspend()` as part of
-their handler for the :c:type:`device_driver`.\ ``suspend()``, and
-:c:func:`dvb_frontend_resume()` as
-part of their handler for :c:type:`device_driver`.\ ``resume()``.
-
-A few other optional functions are provided to handle some special cases.
-
-.. _dvbv5_stats:
-
-Digital TV Frontend statistics
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Introduction
-^^^^^^^^^^^^
-
-Digital TV frontends provide a range of
-:ref:`statistics <frontend-stat-properties>` meant to help tuning the device
-and measuring the quality of service.
-
-For each statistics measurement, the driver should set the type of scale used,
-or ``FE_SCALE_NOT_AVAILABLE`` if the statistics is not available on a given
-time. Drivers should also provide the number of statistics for each type.
-that's usually 1 for most video standards [#f2]_.
-
-Drivers should initialize each statistic counters with length and
-scale at its init code. For example, if the frontend provides signal
-strength, it should have, on its init code::
-
- struct dtv_frontend_properties *c = &state->fe.dtv_property_cache;
-
- c->strength.len = 1;
- c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
-
-And, when the statistics got updated, set the scale::
-
- c->strength.stat[0].scale = FE_SCALE_DECIBEL;
- c->strength.stat[0].uvalue = strength;
-
-.. [#f2] For ISDB-T, it may provide both a global statistics and a per-layer
- set of statistics. On such cases, len should be equal to 4. The first
- value corresponds to the global stat; the other ones to each layer, e. g.:
-
- - c->cnr.stat[0] for global S/N carrier ratio,
- - c->cnr.stat[1] for Layer A S/N carrier ratio,
- - c->cnr.stat[2] for layer B S/N carrier ratio,
- - c->cnr.stat[3] for layer C S/N carrier ratio.
-
-.. note:: Please prefer to use ``FE_SCALE_DECIBEL`` instead of
- ``FE_SCALE_RELATIVE`` for signal strength and CNR measurements.
-
-Groups of statistics
-^^^^^^^^^^^^^^^^^^^^
-
-There are several groups of statistics currently supported:
-
-Signal strength (:ref:`DTV-STAT-SIGNAL-STRENGTH`)
- - Measures the signal strength level at the analog part of the tuner or
- demod.
-
- - Typically obtained from the gain applied to the tuner and/or frontend
- in order to detect the carrier. When no carrier is detected, the gain is
- at the maximum value (so, strength is on its minimal).
-
- - As the gain is visible through the set of registers that adjust the gain,
- typically, this statistics is always available [#f3]_.
-
- - Drivers should try to make it available all the times, as this statistics
- can be used when adjusting an antenna position and to check for troubles
- at the cabling.
-
- .. [#f3] On a few devices, the gain keeps floating if no carrier.
- On such devices, strength report should check first if carrier is
- detected at the tuner (``FE_HAS_CARRIER``, see :c:type:`fe_status`),
- and otherwise return the lowest possible value.
-
-Carrier Signal to Noise ratio (:ref:`DTV-STAT-CNR`)
- - Signal to Noise ratio for the main carrier.
-
- - Signal to Noise measurement depends on the device. On some hardware, is
- available when the main carrier is detected. On those hardware, CNR
- measurement usually comes from the tuner (e. g. after ``FE_HAS_CARRIER``,
- see :c:type:`fe_status`).
-
- On other devices, it requires inner FEC decoding,
- as the frontend measures it indirectly from other parameters (e. g. after
- ``FE_HAS_VITERBI``, see :c:type:`fe_status`).
-
- Having it available after inner FEC is more common.
-
-Bit counts post-FEC (:ref:`DTV-STAT-POST-ERROR-BIT-COUNT` and :ref:`DTV-STAT-POST-TOTAL-BIT-COUNT`)
- - Those counters measure the number of bits and bit errors errors after
- the forward error correction (FEC) on the inner coding block
- (after Viterbi, LDPC or other inner code).
-
- - Due to its nature, those statistics depend on full coding lock
- (e. g. after ``FE_HAS_SYNC`` or after ``FE_HAS_LOCK``,
- see :c:type:`fe_status`).
-
-Bit counts pre-FEC (:ref:`DTV-STAT-PRE-ERROR-BIT-COUNT` and :ref:`DTV-STAT-PRE-TOTAL-BIT-COUNT`)
- - Those counters measure the number of bits and bit errors errors before
- the forward error correction (FEC) on the inner coding block
- (before Viterbi, LDPC or other inner code).
-
- - Not all frontends provide this kind of statistics.
-
- - Due to its nature, those statistics depend on inner coding lock (e. g.
- after ``FE_HAS_VITERBI``, see :c:type:`fe_status`).
-
-Block counts (:ref:`DTV-STAT-ERROR-BLOCK-COUNT` and :ref:`DTV-STAT-TOTAL-BLOCK-COUNT`)
- - Those counters measure the number of blocks and block errors errors after
- the forward error correction (FEC) on the inner coding block
- (before Viterbi, LDPC or other inner code).
-
- - Due to its nature, those statistics depend on full coding lock
- (e. g. after ``FE_HAS_SYNC`` or after
- ``FE_HAS_LOCK``, see :c:type:`fe_status`).
-
-.. note:: All counters should be monotonically increased as they're
- collected from the hardware.
-
-A typical example of the logic that handle status and statistics is::
-
- static int foo_get_status_and_stats(struct dvb_frontend *fe)
- {
- struct foo_state *state = fe->demodulator_priv;
- struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-
- int rc;
- enum fe_status *status;
-
- /* Both status and strength are always available */
- rc = foo_read_status(fe, &status);
- if (rc < 0)
- return rc;
-
- rc = foo_read_strength(fe);
- if (rc < 0)
- return rc;
-
- /* Check if CNR is available */
- if (!(fe->status & FE_HAS_CARRIER))
- return 0;
-
- rc = foo_read_cnr(fe);
- if (rc < 0)
- return rc;
-
- /* Check if pre-BER stats are available */
- if (!(fe->status & FE_HAS_VITERBI))
- return 0;
-
- rc = foo_get_pre_ber(fe);
- if (rc < 0)
- return rc;
-
- /* Check if post-BER stats are available */
- if (!(fe->status & FE_HAS_SYNC))
- return 0;
-
- rc = foo_get_post_ber(fe);
- if (rc < 0)
- return rc;
- }
-
- static const struct dvb_frontend_ops ops = {
- /* ... */
- .read_status = foo_get_status_and_stats,
- };
-
-Statistics collect
-^^^^^^^^^^^^^^^^^^
-
-On almost all frontend hardware, the bit and byte counts are stored by
-the hardware after a certain amount of time or after the total bit/block
-counter reaches a certain value (usually programable), for example, on
-every 1000 ms or after receiving 1,000,000 bits.
-
-So, if you read the registers too soon, you'll end by reading the same
-value as in the previous reading, causing the monotonic value to be
-incremented too often.
-
-Drivers should take the responsibility to avoid too often reads. That
-can be done using two approaches:
-
-if the driver have a bit that indicates when a collected data is ready
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-Driver should check such bit before making the statistics available.
-
-An example of such behavior can be found at this code snippet (adapted
-from mb86a20s driver's logic)::
-
- static int foo_get_pre_ber(struct dvb_frontend *fe)
- {
- struct foo_state *state = fe->demodulator_priv;
- struct dtv_frontend_properties *c = &fe->dtv_property_cache;
- int rc, bit_error;
-
- /* Check if the BER measures are already available */
- rc = foo_read_u8(state, 0x54);
- if (rc < 0)
- return rc;
-
- if (!rc)
- return 0;
-
- /* Read Bit Error Count */
- bit_error = foo_read_u32(state, 0x55);
- if (bit_error < 0)
- return bit_error;
-
- /* Read Total Bit Count */
- rc = foo_read_u32(state, 0x51);
- if (rc < 0)
- return rc;
-
- c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER;
- c->pre_bit_error.stat[0].uvalue += bit_error;
- c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER;
- c->pre_bit_count.stat[0].uvalue += rc;
-
- return 0;
- }
-
-If the driver doesn't provide a statistics available check bit
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-A few devices, however, may not provide a way to check if the stats are
-available (or the way to check it is unknown). They may not even provide
-a way to directly read the total number of bits or blocks.
-
-On those devices, the driver need to ensure that it won't be reading from
-the register too often and/or estimate the total number of bits/blocks.
-
-On such drivers, a typical routine to get statistics would be like
-(adapted from dib8000 driver's logic)::
-
- struct foo_state {
- /* ... */
-
- unsigned long per_jiffies_stats;
- }
-
- static int foo_get_pre_ber(struct dvb_frontend *fe)
- {
- struct foo_state *state = fe->demodulator_priv;
- struct dtv_frontend_properties *c = &fe->dtv_property_cache;
- int rc, bit_error;
- u64 bits;
-
- /* Check if time for stats was elapsed */
- if (!time_after(jiffies, state->per_jiffies_stats))
- return 0;
-
- /* Next stat should be collected in 1000 ms */
- state->per_jiffies_stats = jiffies + msecs_to_jiffies(1000);
-
- /* Read Bit Error Count */
- bit_error = foo_read_u32(state, 0x55);
- if (bit_error < 0)
- return bit_error;
-
- /*
- * On this particular frontend, there's no register that
- * would provide the number of bits per 1000ms sample. So,
- * some function would calculate it based on DTV properties
- */
- bits = get_number_of_bits_per_1000ms(fe);
-
- c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER;
- c->pre_bit_error.stat[0].uvalue += bit_error;
- c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER;
- c->pre_bit_count.stat[0].uvalue += bits;
-
- return 0;
- }
-
-Please notice that, on both cases, we're getting the statistics using the
-:c:type:`dvb_frontend_ops` ``.read_status`` callback. The rationale is that
-the frontend core will automatically call this function periodically
-(usually, 3 times per second, when the frontend is locked).
-
-That warrants that we won't miss to collect a counter and increment the
-monotonic stats at the right time.
-
-Digital TV Frontend functions and types
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-.. kernel-doc:: drivers/media/dvb-core/dvb_frontend.h
-
-
-Digital TV Demux kABI
----------------------
-
-Digital TV Demux
-~~~~~~~~~~~~~~~~
-
-The Kernel Digital TV Demux kABI defines a driver-internal interface for
-registering low-level, hardware specific driver to a hardware independent
-demux layer. It is only of interest for Digital TV device driver writers.
-The header file for this kABI is named demux.h and located in
-drivers/media/dvb-core.
-
-The demux kABI should be implemented for each demux in the system. It is
-used to select the TS source of a demux and to manage the demux resources.
-When the demux client allocates a resource via the demux kABI, it receives
-a pointer to the kABI of that resource.
-
-Each demux receives its TS input from a DVB front-end or from memory, as
-set via this demux kABI. In a system with more than one front-end, the kABI
-can be used to select one of the DVB front-ends as a TS source for a demux,
-unless this is fixed in the HW platform.
-
-The demux kABI only controls front-ends regarding to their connections with
-demuxes; the kABI used to set the other front-end parameters, such as
-tuning, are devined via the Digital TV Frontend kABI.
-
-The functions that implement the abstract interface demux should be defined
-static or module private and registered to the Demux core for external
-access. It is not necessary to implement every function in the struct
-&dmx_demux. For example, a demux interface might support Section filtering,
-but not PES filtering. The kABI client is expected to check the value of any
-function pointer before calling the function: the value of ``NULL`` means
-that the function is not available.
-
-Whenever the functions of the demux API modify shared data, the
-possibilities of lost update and race condition problems should be
-addressed, e.g. by protecting parts of code with mutexes.
-
-Note that functions called from a bottom half context must not sleep.
-Even a simple memory allocation without using ``GFP_ATOMIC`` can result in a
-kernel thread being put to sleep if swapping is needed. For example, the
-Linux Kernel calls the functions of a network device interface from a
-bottom half context. Thus, if a demux kABI function is called from network
-device code, the function must not sleep.
-
-
-
-Demux Callback API
-------------------
-
-Demux Callback
-~~~~~~~~~~~~~~
-
-This kernel-space API comprises the callback functions that deliver filtered
-data to the demux client. Unlike the other DVB kABIs, these functions are
-provided by the client and called from the demux code.
-
-The function pointers of this abstract interface are not packed into a
-structure as in the other demux APIs, because the callback functions are
-registered and used independent of each other. As an example, it is possible
-for the API client to provide several callback functions for receiving TS
-packets and no callbacks for PES packets or sections.
-
-The functions that implement the callback API need not be re-entrant: when
-a demux driver calls one of these functions, the driver is not allowed to
-call the function again before the original call returns. If a callback is
-triggered by a hardware interrupt, it is recommended to use the Linux
-bottom half mechanism or start a tasklet instead of making the callback
-function call directly from a hardware interrupt.
-
-This mechanism is implemented by :c:func:`dmx_ts_cb()` and :c:func:`dmx_section_cb()`
-callbacks.
-
-.. kernel-doc:: drivers/media/dvb-core/demux.h
-
-Digital TV Conditional Access kABI
-----------------------------------
-
-.. kernel-doc:: drivers/media/dvb-core/dvb_ca_en50221.h
+ dtv-common
+ dtv-frontend
+ dtv-demux
+ dtv-ca
diff --git a/Documentation/media/kapi/dtv-demux.rst b/Documentation/media/kapi/dtv-demux.rst
new file mode 100644
index 000000000000..8169c479156e
--- /dev/null
+++ b/Documentation/media/kapi/dtv-demux.rst
@@ -0,0 +1,71 @@
+Digital TV Demux kABI
+---------------------
+
+Digital TV Demux
+~~~~~~~~~~~~~~~~
+
+The Kernel Digital TV Demux kABI defines a driver-internal interface for
+registering low-level, hardware specific driver to a hardware independent
+demux layer. It is only of interest for Digital TV device driver writers.
+The header file for this kABI is named demux.h and located in
+drivers/media/dvb-core.
+
+The demux kABI should be implemented for each demux in the system. It is
+used to select the TS source of a demux and to manage the demux resources.
+When the demux client allocates a resource via the demux kABI, it receives
+a pointer to the kABI of that resource.
+
+Each demux receives its TS input from a DVB front-end or from memory, as
+set via this demux kABI. In a system with more than one front-end, the kABI
+can be used to select one of the DVB front-ends as a TS source for a demux,
+unless this is fixed in the HW platform.
+
+The demux kABI only controls front-ends regarding to their connections with
+demuxes; the kABI used to set the other front-end parameters, such as
+tuning, are devined via the Digital TV Frontend kABI.
+
+The functions that implement the abstract interface demux should be defined
+static or module private and registered to the Demux core for external
+access. It is not necessary to implement every function in the struct
+&dmx_demux. For example, a demux interface might support Section filtering,
+but not PES filtering. The kABI client is expected to check the value of any
+function pointer before calling the function: the value of ``NULL`` means
+that the function is not available.
+
+Whenever the functions of the demux API modify shared data, the
+possibilities of lost update and race condition problems should be
+addressed, e.g. by protecting parts of code with mutexes.
+
+Note that functions called from a bottom half context must not sleep.
+Even a simple memory allocation without using ``GFP_ATOMIC`` can result in a
+kernel thread being put to sleep if swapping is needed. For example, the
+Linux Kernel calls the functions of a network device interface from a
+bottom half context. Thus, if a demux kABI function is called from network
+device code, the function must not sleep.
+
+
+
+Demux Callback API
+~~~~~~~~~~~~~~~~~~
+
+This kernel-space API comprises the callback functions that deliver filtered
+data to the demux client. Unlike the other DVB kABIs, these functions are
+provided by the client and called from the demux code.
+
+The function pointers of this abstract interface are not packed into a
+structure as in the other demux APIs, because the callback functions are
+registered and used independent of each other. As an example, it is possible
+for the API client to provide several callback functions for receiving TS
+packets and no callbacks for PES packets or sections.
+
+The functions that implement the callback API need not be re-entrant: when
+a demux driver calls one of these functions, the driver is not allowed to
+call the function again before the original call returns. If a callback is
+triggered by a hardware interrupt, it is recommended to use the Linux
+bottom half mechanism or start a tasklet instead of making the callback
+function call directly from a hardware interrupt.
+
+This mechanism is implemented by :c:func:`dmx_ts_cb()` and :c:func:`dmx_section_cb()`
+callbacks.
+
+.. kernel-doc:: drivers/media/dvb-core/demux.h
diff --git a/Documentation/media/kapi/dtv-frontend.rst b/Documentation/media/kapi/dtv-frontend.rst
new file mode 100644
index 000000000000..9f67b7a7387d
--- /dev/null
+++ b/Documentation/media/kapi/dtv-frontend.rst
@@ -0,0 +1,443 @@
+Digital TV Frontend kABI
+------------------------
+
+Digital TV Frontend
+~~~~~~~~~~~~~~~~~~~
+
+The Digital TV Frontend kABI defines a driver-internal interface for
+registering low-level, hardware specific driver to a hardware independent
+frontend layer. It is only of interest for Digital TV device driver writers.
+The header file for this API is named ``dvb_frontend.h`` and located in
+``drivers/media/dvb-core``.
+
+Demodulator driver
+^^^^^^^^^^^^^^^^^^
+
+The demodulator driver is responsible to talk with the decoding part of the
+hardware. Such driver should implement :c:type:`dvb_frontend_ops`, with
+tells what type of digital TV standards are supported, and points to a
+series of functions that allow the DVB core to command the hardware via
+the code under ``drivers/media/dvb-core/dvb_frontend.c``.
+
+A typical example of such struct in a driver ``foo`` is::
+
+ static struct dvb_frontend_ops foo_ops = {
+ .delsys = { SYS_DVBT, SYS_DVBT2, SYS_DVBC_ANNEX_A },
+ .info = {
+ .name = "foo DVB-T/T2/C driver",
+ .caps = FE_CAN_FEC_1_2 |
+ FE_CAN_FEC_2_3 |
+ FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_5_6 |
+ FE_CAN_FEC_7_8 |
+ FE_CAN_FEC_AUTO |
+ FE_CAN_QPSK |
+ FE_CAN_QAM_16 |
+ FE_CAN_QAM_32 |
+ FE_CAN_QAM_64 |
+ FE_CAN_QAM_128 |
+ FE_CAN_QAM_256 |
+ FE_CAN_QAM_AUTO |
+ FE_CAN_TRANSMISSION_MODE_AUTO |
+ FE_CAN_GUARD_INTERVAL_AUTO |
+ FE_CAN_HIERARCHY_AUTO |
+ FE_CAN_MUTE_TS |
+ FE_CAN_2G_MODULATION,
+ .frequency_min = 42000000, /* Hz */
+ .frequency_max = 1002000000, /* Hz */
+ .symbol_rate_min = 870000,
+ .symbol_rate_max = 11700000
+ },
+ .init = foo_init,
+ .sleep = foo_sleep,
+ .release = foo_release,
+ .set_frontend = foo_set_frontend,
+ .get_frontend = foo_get_frontend,
+ .read_status = foo_get_status_and_stats,
+ .tune = foo_tune,
+ .i2c_gate_ctrl = foo_i2c_gate_ctrl,
+ .get_frontend_algo = foo_get_algo,
+ };
+
+A typical example of such struct in a driver ``bar`` meant to be used on
+Satellite TV reception is::
+
+ static const struct dvb_frontend_ops bar_ops = {
+ .delsys = { SYS_DVBS, SYS_DVBS2 },
+ .info = {
+ .name = "Bar DVB-S/S2 demodulator",
+ .frequency_min = 500000, /* KHz */
+ .frequency_max = 2500000, /* KHz */
+ .frequency_stepsize = 0,
+ .symbol_rate_min = 1000000,
+ .symbol_rate_max = 45000000,
+ .symbol_rate_tolerance = 500,
+ .caps = FE_CAN_INVERSION_AUTO |
+ FE_CAN_FEC_AUTO |
+ FE_CAN_QPSK,
+ },
+ .init = bar_init,
+ .sleep = bar_sleep,
+ .release = bar_release,
+ .set_frontend = bar_set_frontend,
+ .get_frontend = bar_get_frontend,
+ .read_status = bar_get_status_and_stats,
+ .i2c_gate_ctrl = bar_i2c_gate_ctrl,
+ .get_frontend_algo = bar_get_algo,
+ .tune = bar_tune,
+
+ /* Satellite-specific */
+ .diseqc_send_master_cmd = bar_send_diseqc_msg,
+ .diseqc_send_burst = bar_send_burst,
+ .set_tone = bar_set_tone,
+ .set_voltage = bar_set_voltage,
+ };
+
+.. note::
+
+ #) For satellite digital TV standards (DVB-S, DVB-S2, ISDB-S), the
+ frequencies are specified in kHz, while, for terrestrial and cable
+ standards, they're specified in Hz. Due to that, if the same frontend
+ supports both types, you'll need to have two separate
+ :c:type:`dvb_frontend_ops` structures, one for each standard.
+ #) The ``.i2c_gate_ctrl`` field is present only when the hardware has
+ allows controlling an I2C gate (either directly of via some GPIO pin),
+ in order to remove the tuner from the I2C bus after a channel is
+ tuned.
+ #) All new drivers should implement the
+ :ref:`DVBv5 statistics <dvbv5_stats>` via ``.read_status``.
+ Yet, there are a number of callbacks meant to get statistics for
+ signal strength, S/N and UCB. Those are there to provide backward
+ compatibility with legacy applications that don't support the DVBv5
+ API. Implementing those callbacks are optional. Those callbacks may be
+ removed in the future, after we have all existing drivers supporting
+ DVBv5 stats.
+ #) Other callbacks are required for satellite TV standards, in order to
+ control LNBf and DiSEqC: ``.diseqc_send_master_cmd``,
+ ``.diseqc_send_burst``, ``.set_tone``, ``.set_voltage``.
+
+.. |delta| unicode:: U+00394
+
+The ``drivers/media/dvb-core/dvb_frontend.c`` has a kernel thread with is
+responsible for tuning the device. It supports multiple algoritms to
+detect a channel, as defined at enum :c:func:`dvbfe_algo`.
+
+The algorithm to be used is obtained via ``.get_frontend_algo``. If the driver
+doesn't fill its field at struct :c:type:`dvb_frontend_ops`, it will default to
+``DVBFE_ALGO_SW``, meaning that the dvb-core will do a zigzag when tuning,
+e. g. it will try first to use the specified center frequency ``f``,
+then, it will do ``f`` + |delta|, ``f`` - |delta|, ``f`` + 2 x |delta|,
+``f`` - 2 x |delta| and so on.
+
+If the hardware has internally a some sort of zigzag algorithm, you should
+define a ``.get_frontend_algo`` function that would return ``DVBFE_ALGO_HW``.
+
+.. note::
+
+ The core frontend support also supports
+ a third type (``DVBFE_ALGO_CUSTOM``), in order to allow the driver to
+ define its own hardware-assisted algorithm. Very few hardware need to
+ use it nowadays. Using ``DVBFE_ALGO_CUSTOM`` require to provide other
+ function callbacks at struct :c:type:`dvb_frontend_ops`.
+
+Attaching frontend driver to the bridge driver
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Before using the Digital TV frontend core, the bridge driver should attach
+the frontend demod, tuner and SEC devices and call
+:c:func:`dvb_register_frontend()`,
+in order to register the new frontend at the subsystem. At device
+detach/removal, the bridge driver should call
+:c:func:`dvb_unregister_frontend()` to
+remove the frontend from the core and then :c:func:`dvb_frontend_detach()`
+to free the memory allocated by the frontend drivers.
+
+The drivers should also call :c:func:`dvb_frontend_suspend()` as part of
+their handler for the :c:type:`device_driver`.\ ``suspend()``, and
+:c:func:`dvb_frontend_resume()` as
+part of their handler for :c:type:`device_driver`.\ ``resume()``.
+
+A few other optional functions are provided to handle some special cases.
+
+.. _dvbv5_stats:
+
+Digital TV Frontend statistics
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Introduction
+^^^^^^^^^^^^
+
+Digital TV frontends provide a range of
+:ref:`statistics <frontend-stat-properties>` meant to help tuning the device
+and measuring the quality of service.
+
+For each statistics measurement, the driver should set the type of scale used,
+or ``FE_SCALE_NOT_AVAILABLE`` if the statistics is not available on a given
+time. Drivers should also provide the number of statistics for each type.
+that's usually 1 for most video standards [#f2]_.
+
+Drivers should initialize each statistic counters with length and
+scale at its init code. For example, if the frontend provides signal
+strength, it should have, on its init code::
+
+ struct dtv_frontend_properties *c = &state->fe.dtv_property_cache;
+
+ c->strength.len = 1;
+ c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+
+And, when the statistics got updated, set the scale::
+
+ c->strength.stat[0].scale = FE_SCALE_DECIBEL;
+ c->strength.stat[0].uvalue = strength;
+
+.. [#f2] For ISDB-T, it may provide both a global statistics and a per-layer
+ set of statistics. On such cases, len should be equal to 4. The first
+ value corresponds to the global stat; the other ones to each layer, e. g.:
+
+ - c->cnr.stat[0] for global S/N carrier ratio,
+ - c->cnr.stat[1] for Layer A S/N carrier ratio,
+ - c->cnr.stat[2] for layer B S/N carrier ratio,
+ - c->cnr.stat[3] for layer C S/N carrier ratio.
+
+.. note:: Please prefer to use ``FE_SCALE_DECIBEL`` instead of
+ ``FE_SCALE_RELATIVE`` for signal strength and CNR measurements.
+
+Groups of statistics
+^^^^^^^^^^^^^^^^^^^^
+
+There are several groups of statistics currently supported:
+
+Signal strength (:ref:`DTV-STAT-SIGNAL-STRENGTH`)
+ - Measures the signal strength level at the analog part of the tuner or
+ demod.
+
+ - Typically obtained from the gain applied to the tuner and/or frontend
+ in order to detect the carrier. When no carrier is detected, the gain is
+ at the maximum value (so, strength is on its minimal).
+
+ - As the gain is visible through the set of registers that adjust the gain,
+ typically, this statistics is always available [#f3]_.
+
+ - Drivers should try to make it available all the times, as this statistics
+ can be used when adjusting an antenna position and to check for troubles
+ at the cabling.
+
+ .. [#f3] On a few devices, the gain keeps floating if no carrier.
+ On such devices, strength report should check first if carrier is
+ detected at the tuner (``FE_HAS_CARRIER``, see :c:type:`fe_status`),
+ and otherwise return the lowest possible value.
+
+Carrier Signal to Noise ratio (:ref:`DTV-STAT-CNR`)
+ - Signal to Noise ratio for the main carrier.
+
+ - Signal to Noise measurement depends on the device. On some hardware, is
+ available when the main carrier is detected. On those hardware, CNR
+ measurement usually comes from the tuner (e. g. after ``FE_HAS_CARRIER``,
+ see :c:type:`fe_status`).
+
+ On other devices, it requires inner FEC decoding,
+ as the frontend measures it indirectly from other parameters (e. g. after
+ ``FE_HAS_VITERBI``, see :c:type:`fe_status`).
+
+ Having it available after inner FEC is more common.
+
+Bit counts post-FEC (:ref:`DTV-STAT-POST-ERROR-BIT-COUNT` and :ref:`DTV-STAT-POST-TOTAL-BIT-COUNT`)
+ - Those counters measure the number of bits and bit errors errors after
+ the forward error correction (FEC) on the inner coding block
+ (after Viterbi, LDPC or other inner code).
+
+ - Due to its nature, those statistics depend on full coding lock
+ (e. g. after ``FE_HAS_SYNC`` or after ``FE_HAS_LOCK``,
+ see :c:type:`fe_status`).
+
+Bit counts pre-FEC (:ref:`DTV-STAT-PRE-ERROR-BIT-COUNT` and :ref:`DTV-STAT-PRE-TOTAL-BIT-COUNT`)
+ - Those counters measure the number of bits and bit errors errors before
+ the forward error correction (FEC) on the inner coding block
+ (before Viterbi, LDPC or other inner code).
+
+ - Not all frontends provide this kind of statistics.
+
+ - Due to its nature, those statistics depend on inner coding lock (e. g.
+ after ``FE_HAS_VITERBI``, see :c:type:`fe_status`).
+
+Block counts (:ref:`DTV-STAT-ERROR-BLOCK-COUNT` and :ref:`DTV-STAT-TOTAL-BLOCK-COUNT`)
+ - Those counters measure the number of blocks and block errors errors after
+ the forward error correction (FEC) on the inner coding block
+ (before Viterbi, LDPC or other inner code).
+
+ - Due to its nature, those statistics depend on full coding lock
+ (e. g. after ``FE_HAS_SYNC`` or after
+ ``FE_HAS_LOCK``, see :c:type:`fe_status`).
+
+.. note:: All counters should be monotonically increased as they're
+ collected from the hardware.
+
+A typical example of the logic that handle status and statistics is::
+
+ static int foo_get_status_and_stats(struct dvb_frontend *fe)
+ {
+ struct foo_state *state = fe->demodulator_priv;
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+
+ int rc;
+ enum fe_status *status;
+
+ /* Both status and strength are always available */
+ rc = foo_read_status(fe, &status);
+ if (rc < 0)
+ return rc;
+
+ rc = foo_read_strength(fe);
+ if (rc < 0)
+ return rc;
+
+ /* Check if CNR is available */
+ if (!(fe->status & FE_HAS_CARRIER))
+ return 0;
+
+ rc = foo_read_cnr(fe);
+ if (rc < 0)
+ return rc;
+
+ /* Check if pre-BER stats are available */
+ if (!(fe->status & FE_HAS_VITERBI))
+ return 0;
+
+ rc = foo_get_pre_ber(fe);
+ if (rc < 0)
+ return rc;
+
+ /* Check if post-BER stats are available */
+ if (!(fe->status & FE_HAS_SYNC))
+ return 0;
+
+ rc = foo_get_post_ber(fe);
+ if (rc < 0)
+ return rc;
+ }
+
+ static const struct dvb_frontend_ops ops = {
+ /* ... */
+ .read_status = foo_get_status_and_stats,
+ };
+
+Statistics collect
+^^^^^^^^^^^^^^^^^^
+
+On almost all frontend hardware, the bit and byte counts are stored by
+the hardware after a certain amount of time or after the total bit/block
+counter reaches a certain value (usually programable), for example, on
+every 1000 ms or after receiving 1,000,000 bits.
+
+So, if you read the registers too soon, you'll end by reading the same
+value as in the previous reading, causing the monotonic value to be
+incremented too often.
+
+Drivers should take the responsibility to avoid too often reads. That
+can be done using two approaches:
+
+if the driver have a bit that indicates when a collected data is ready
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+Driver should check such bit before making the statistics available.
+
+An example of such behavior can be found at this code snippet (adapted
+from mb86a20s driver's logic)::
+
+ static int foo_get_pre_ber(struct dvb_frontend *fe)
+ {
+ struct foo_state *state = fe->demodulator_priv;
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ int rc, bit_error;
+
+ /* Check if the BER measures are already available */
+ rc = foo_read_u8(state, 0x54);
+ if (rc < 0)
+ return rc;
+
+ if (!rc)
+ return 0;
+
+ /* Read Bit Error Count */
+ bit_error = foo_read_u32(state, 0x55);
+ if (bit_error < 0)
+ return bit_error;
+
+ /* Read Total Bit Count */
+ rc = foo_read_u32(state, 0x51);
+ if (rc < 0)
+ return rc;
+
+ c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER;
+ c->pre_bit_error.stat[0].uvalue += bit_error;
+ c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER;
+ c->pre_bit_count.stat[0].uvalue += rc;
+
+ return 0;
+ }
+
+If the driver doesn't provide a statistics available check bit
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+A few devices, however, may not provide a way to check if the stats are
+available (or the way to check it is unknown). They may not even provide
+a way to directly read the total number of bits or blocks.
+
+On those devices, the driver need to ensure that it won't be reading from
+the register too often and/or estimate the total number of bits/blocks.
+
+On such drivers, a typical routine to get statistics would be like
+(adapted from dib8000 driver's logic)::
+
+ struct foo_state {
+ /* ... */
+
+ unsigned long per_jiffies_stats;
+ }
+
+ static int foo_get_pre_ber(struct dvb_frontend *fe)
+ {
+ struct foo_state *state = fe->demodulator_priv;
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ int rc, bit_error;
+ u64 bits;
+
+ /* Check if time for stats was elapsed */
+ if (!time_after(jiffies, state->per_jiffies_stats))
+ return 0;
+
+ /* Next stat should be collected in 1000 ms */
+ state->per_jiffies_stats = jiffies + msecs_to_jiffies(1000);
+
+ /* Read Bit Error Count */
+ bit_error = foo_read_u32(state, 0x55);
+ if (bit_error < 0)
+ return bit_error;
+
+ /*
+ * On this particular frontend, there's no register that
+ * would provide the number of bits per 1000ms sample. So,
+ * some function would calculate it based on DTV properties
+ */
+ bits = get_number_of_bits_per_1000ms(fe);
+
+ c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER;
+ c->pre_bit_error.stat[0].uvalue += bit_error;
+ c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER;
+ c->pre_bit_count.stat[0].uvalue += bits;
+
+ return 0;
+ }
+
+Please notice that, on both cases, we're getting the statistics using the
+:c:type:`dvb_frontend_ops` ``.read_status`` callback. The rationale is that
+the frontend core will automatically call this function periodically
+(usually, 3 times per second, when the frontend is locked).
+
+That warrants that we won't miss to collect a counter and increment the
+monotonic stats at the right time.
+
+Digital TV Frontend functions and types
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. kernel-doc:: drivers/media/dvb-core/dvb_frontend.h