summaryrefslogtreecommitdiff
path: root/Documentation/sound/cards
diff options
context:
space:
mode:
authorMauro Carvalho Chehab <mchehab+samsung@kernel.org>2018-06-26 12:24:39 +0300
committerTakashi Iwai <tiwai@suse.de>2018-06-26 18:45:16 +0300
commit513f930667beca7f67e3aa4558196c143864083f (patch)
tree68c6ae3c9d08f6ae82c316ca36d9a1acf082ad3e /Documentation/sound/cards
parent06501a6d2d2912b9e357702327c0249a5ecd7c9e (diff)
downloadlinux-513f930667beca7f67e3aa4558196c143864083f.tar.xz
ALSA: multisound.sh: update module namespace
The modules for the cards described here changed their names. Update accordingly. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'Documentation/sound/cards')
-rwxr-xr-xDocumentation/sound/cards/multisound.sh72
1 files changed, 36 insertions, 36 deletions
diff --git a/Documentation/sound/cards/multisound.sh b/Documentation/sound/cards/multisound.sh
index 0e0cb029421b..a915a1affcde 100755
--- a/Documentation/sound/cards/multisound.sh
+++ b/Documentation/sound/cards/multisound.sh
@@ -34,12 +34,12 @@
# composed of the following modules (these can also operate compiled
# into the kernel):
#
-# msnd - MultiSound base (requires soundcore)
+# snd-msnd-lib - MultiSound base (requires snd)
#
-# msnd_classic - Base audio/mixer support for Classic, Monetery and
-# Tahiti cards
+# snd-msnd-classic - Base audio/mixer support for Classic, Monetery and
+# Tahiti cards
#
-# msnd_pinnacle - Base audio/mixer support for Pinnacle and Fiji cards
+# snd-msnd-pinnacle - Base audio/mixer support for Pinnacle and Fiji cards
#
#
# Important Notes - Read Before Using
@@ -66,7 +66,7 @@
#
# * Classic/Monterey/Tahiti
#
-# These cards are configured through the driver msnd_classic. You must
+# These cards are configured through the driver snd-msnd-classic. You must
# know the io port, then the driver will select the irq and memory resources
# on the card. It is up to you to know if these are free locations or now,
# a conflict can lock the machine up.
@@ -81,10 +81,10 @@
# can be used to configure the card in non-PnP mode, and in PnP mode
# you can use isapnptools. These are described briefly here.
#
-# pinnaclecfg is not required; you can use the msnd_pinnacle module
+# pinnaclecfg is not required; you can use the snd-msnd-pinnacle module
# to fully configure the card as well. However, pinnaclecfg can be
# used to change the resource values of a particular device after the
-# msnd_pinnacle module has been loaded. If you are compiling the
+# snd-msnd-pinnacle module has been loaded. If you are compiling the
# driver into the kernel, you must set these values during compile
# time, however other peripheral resource values can be changed with
# the pinnaclecfg program after the kernel is loaded.
@@ -96,7 +96,7 @@
# to obtain one with the command `pnpdump 1 0x203' -- this may vary
# for you (running pnpdump by itself did not work for me). Then,
# edit this file and use isapnp to uncomment and set the card values.
-# Use these values when inserting the msnd_pinnacle module. Using
+# Use these values when inserting the snd-msnd-pinnacle module. Using
# this method, you can set the resources for the DSP and the Kurzweil
# synth (Pinnacle). Since Linux does not directly support PnP
# devices, you may have difficulty when using the card in PnP mode
@@ -133,16 +133,16 @@
# pinnaclecfg program. Using this program, you can assign the
# resource values to the card's devices, or disable the devices. As
# an alternative to using pinnaclecfg, you can specify many of the
-# configuration values when loading the msnd_pinnacle module (or
+# configuration values when loading the snd-msnd-pinnacle module (or
# during kernel configuration when compiling the driver into the
# kernel).
#
-# If you specify cfg=0x250 for the msnd_pinnacle module, it
+# If you specify cfg=0x250 for the snd-msnd-pinnacle module, it
# automatically configure the card to the given io, irq and memory
# values using that config port (the config port is jumper selectable
# on the card to 0x250, 0x260 or 0x270).
#
-# See the `msnd_pinnacle Additional Options' section below for more
+# See the `snd-msnd-pinnacle Additional Options' section below for more
# information on these parameters (also, if you compile the driver
# directly into the kernel, these extra parameters can be useful
# here).
@@ -157,44 +157,44 @@
#
# * MultiSound Classic/Monterey/Tahiti:
#
-# modprobe soundcore
-# insmod msnd
-# insmod msnd_classic io=0x290 irq=7 mem=0xd0000
+# modprobe snd
+# insmod snd-msnd-lib
+# insmod snd-msnd-classic io=0x290 irq=7 mem=0xd0000
#
# * MultiSound Pinnacle in PnP mode:
#
-# modprobe soundcore
-# insmod msnd
+# modprobe snd
+# insmod snd-msnd-lib
# isapnp mypinnacle.conf
-# insmod msnd_pinnacle io=0x210 irq=5 mem=0xd8000 <-- match mypinnacle.conf values
+# insmod snd-msnd-pinnacle io=0x210 irq=5 mem=0xd8000 <-- match mypinnacle.conf values
#
# * MultiSound Pinnacle in non-PnP mode (replace 0x250 with your configuration port,
# one of 0x250, 0x260 or 0x270):
#
-# insmod soundcore
-# insmod msnd
-# insmod msnd_pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000
+# modprobe snd
+# insmod snd-msnd-lib
+# insmod snd-msnd-pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000
#
# * To use the MPU-compatible Kurzweil synth on the Pinnacle in PnP
# mode, add the following (assumes you did `isapnp mypinnacle.conf'):
#
-# insmod sound
+# insmod snd
# insmod mpu401 io=0x330 irq=9 <-- match mypinnacle.conf values
#
# * To use the MPU-compatible Kurzweil synth on the Pinnacle in non-PnP
# mode, add the following. Note how we first configure the peripheral's
# resources, _then_ install a Linux driver for it:
#
-# insmod sound
+# insmod snd
# pinnaclecfg 0x250 mpu 0x330 9
# insmod mpu401 io=0x330 irq=9
#
# -- OR you can use the following sequence without pinnaclecfg in non-PnP mode:
#
-# insmod soundcore
-# insmod msnd
-# insmod msnd_pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000 mpu_io=0x330 mpu_irq=9
-# insmod sound
+# modprobe snd
+# insmod snd-msnd-lib
+# insmod snd-msnd-pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000 mpu_io=0x330 mpu_irq=9
+# insmod snd
# insmod mpu401 io=0x330 irq=9
#
# * To setup the joystick port on the Pinnacle in non-PnP mode (though
@@ -203,15 +203,15 @@
#
# pinnaclecfg 0x250 joystick 0x200
#
-# -- OR you can configure this using msnd_pinnacle with the following:
+# -- OR you can configure this using snd-msnd-pinnacle with the following:
#
-# insmod soundcore
-# insmod msnd
-# insmod msnd_pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000 joystick_io=0x200
+# modprobe snd
+# insmod snd-msnd-lib
+# insmod snd-msnd-pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000 joystick_io=0x200
#
#
-# msnd_classic, msnd_pinnacle Required Options
-# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+# snd-msnd-classic, snd-msnd-pinnacle Required Options
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#
# If the following options are not given, the module will not load.
# Examine the kernel message log for informative error messages.
@@ -223,8 +223,8 @@
# mem Shared memory area, e.g. mem=0xd8000
#
#
-# msnd_classic, msnd_pinnacle Additional Options
-# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+# snd-msnd-classic, snd-msnd-pinnacle Additional Options
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#
# fifosize The digital audio FIFOs, in kilobytes. If not
# specified, the default will be used. Increasing
@@ -244,8 +244,8 @@
# to zero).
#
#
-# msnd_pinnacle Additional Options
-# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+# snd-msnd-pinnacle Additional Options
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#
# digital Specify digital=1 to enable the S/PDIF input
# if you have the digital daughterboard