summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2020-06-02 23:17:23 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2020-06-02 23:17:23 +0300
commit355ba37d756c38962fe9bb616f5f48eb12a7e11e (patch)
tree74bb0fc617a9a9fb5660454c205bf3d08d95896a /Documentation
parenta5a82e0a5918fb2ae27b80d3b9c954b16ae6a7b7 (diff)
parenta34024d98eeaa78e2cd22017180df778800b83fc (diff)
downloadlinux-355ba37d756c38962fe9bb616f5f48eb12a7e11e.tar.xz
Merge tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki: "These rework the system-wide PM driver flags, make runtime switching of cpuidle governors easier, improve the user space hibernation interface code, add intel-speed-select interface documentation, add more debug messages to the ACPI code handling suspend to idle, update the cpufreq core and drivers, fix a minor issue in the cpuidle core and update two cpuidle drivers, improve the PM-runtime framework, update the Intel RAPL power capping driver, update devfreq core and drivers, and clean up the cpupower utility. Specifics: - Rework the system-wide PM driver flags to make them easier to understand and use and update their documentation (Rafael Wysocki, Alan Stern). - Allow cpuidle governors to be switched at run time regardless of the kernel configuration and update the related documentation accordingly (Hanjun Guo). - Improve the resume device handling in the user space hibernarion interface code (Domenico Andreoli). - Document the intel-speed-select sysfs interface (Srinivas Pandruvada). - Make the ACPI code handing suspend to idle print more debug messages to help diagnose issues with it (Rafael Wysocki). - Fix a helper routine in the cpufreq core and correct a typo in the struct cpufreq_driver kerneldoc comment (Rafael Wysocki, Wang Wenhu). - Update cpufreq drivers: - Make the intel_pstate driver start in the passive mode by default on systems without HWP (Rafael Wysocki). - Add i.MX7ULP support to the imx-cpufreq-dt driver and add i.MX7ULP to the cpufreq-dt-platdev blacklist (Peng Fan). - Convert the qoriq cpufreq driver to a platform one, make the platform code create a suitable device object for it and add platform dependencies to it (Mian Yousaf Kaukab, Geert Uytterhoeven). - Fix wrong compatible binding in the qcom driver (Ansuel Smith). - Build the omap driver by default for ARCH_OMAP2PLUS (Anders Roxell). - Add r8a7742 SoC support to the dt cpufreq driver (Lad Prabhakar). - Update cpuidle core and drivers: - Fix three reference count leaks in error code paths in the cpuidle core (Qiushi Wu). - Convert Qualcomm SPM to a generic cpuidle driver (Stephan Gerhold). - Fix up the execution order when entering a domain idle state in the PSCI driver (Ulf Hansson). - Fix a reference counting issue related to clock management and clean up two oddities in the PM-runtime framework (Rafael Wysocki, Andy Shevchenko). - Add ElkhartLake support to the Intel RAPL power capping driver and remove an unused local MSR definition from it (Jacob Pan, Sumeet Pawnikar). - Update devfreq core and drivers: - Replace strncpy() with strscpy() in the devfreq core and use lockdep asserts instead of manual checks for a locked mutex in it (Dmitry Osipenko, Krzysztof Kozlowski). - Add a generic imx bus scaling driver and make it register an interconnect device (Leonard Crestez, Gustavo A. R. Silva). - Make the cpufreq notifier in the tegra30 driver take boosting into account and delete an unuseful error message from that driver (Dmitry Osipenko, Markus Elfring). - Remove unneeded semicolon from the cpupower code (Zou Wei)" * tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (51 commits) cpuidle: Fix three reference count leaks PM: runtime: Replace pm_runtime_callbacks_present() PM / devfreq: Use lockdep asserts instead of manual checks for locked mutex PM / devfreq: imx-bus: Fix inconsistent IS_ERR and PTR_ERR PM / devfreq: Replace strncpy with strscpy PM / devfreq: imx: Register interconnect device PM / devfreq: Add generic imx bus scaling driver PM / devfreq: tegra30: Delete an error message in tegra_devfreq_probe() PM / devfreq: tegra30: Make CPUFreq notifier to take into account boosting PM: hibernate: Restrict writes to the resume device PM: runtime: clk: Fix clk_pm_runtime_get() error path cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver ACPI: EC: PM: s2idle: Extend GPE dispatching debug message ACPI: PM: s2idle: Print type of wakeup debug messages powercap: RAPL: remove unused local MSR define PM: runtime: Make clear what we do when conditions are wrong in rpm_suspend() Documentation: admin-guide: pm: Document intel-speed-select PM: hibernate: Split off snapshot dev option PM: hibernate: Incorporate concurrency handling Documentation: ABI: make current_governer_ro as a candidate for removal ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/obsolete/sysfs-cpuidle9
-rw-r--r--Documentation/ABI/testing/sysfs-devices-system-cpu24
-rw-r--r--Documentation/admin-guide/pm/cpuidle.rst20
-rw-r--r--Documentation/admin-guide/pm/intel-speed-select.rst917
-rw-r--r--Documentation/admin-guide/pm/intel_pstate.rst32
-rw-r--r--Documentation/admin-guide/pm/working-state.rst1
-rw-r--r--Documentation/driver-api/pm/cpuidle.rst5
-rw-r--r--Documentation/driver-api/pm/devices.rst199
-rw-r--r--Documentation/power/pci.rst58
9 files changed, 1121 insertions, 144 deletions
diff --git a/Documentation/ABI/obsolete/sysfs-cpuidle b/Documentation/ABI/obsolete/sysfs-cpuidle
new file mode 100644
index 000000000000..e398fb5e542f
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-cpuidle
@@ -0,0 +1,9 @@
+What: /sys/devices/system/cpu/cpuidle/current_governor_ro
+Date: April, 2020
+Contact: linux-pm@vger.kernel.org
+Description:
+ current_governor_ro shows current using cpuidle governor, but read only.
+ with the update that cpuidle governor can be changed at runtime in default,
+ both current_governor and current_governor_ro co-exist under
+ /sys/devices/system/cpu/cpuidle/ file, it's duplicate so make
+ current_governor_ro obselete.
diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
index 2e0e3b45d02a..6b5dafab950c 100644
--- a/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -106,10 +106,10 @@ Description: CPU topology files that describe a logical CPU's relationship
See Documentation/admin-guide/cputopology.rst for more information.
-What: /sys/devices/system/cpu/cpuidle/current_driver
- /sys/devices/system/cpu/cpuidle/current_governer_ro
- /sys/devices/system/cpu/cpuidle/available_governors
+What: /sys/devices/system/cpu/cpuidle/available_governors
+ /sys/devices/system/cpu/cpuidle/current_driver
/sys/devices/system/cpu/cpuidle/current_governor
+ /sys/devices/system/cpu/cpuidle/current_governer_ro
Date: September 2007
Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
Description: Discover cpuidle policy and mechanism
@@ -119,24 +119,18 @@ Description: Discover cpuidle policy and mechanism
consumption during idle.
Idle policy (governor) is differentiated from idle mechanism
- (driver)
-
- current_driver: (RO) displays current idle mechanism
-
- current_governor_ro: (RO) displays current idle policy
-
- With the cpuidle_sysfs_switch boot option enabled (meant for
- developer testing), the following three attributes are visible
- instead:
-
- current_driver: same as described above
+ (driver).
available_governors: (RO) displays a space separated list of
- available governors
+ available governors.
+
+ current_driver: (RO) displays current idle mechanism.
current_governor: (RW) displays current idle policy. Users can
switch the governor at runtime by writing to this file.
+ current_governor_ro: (RO) displays current idle policy.
+
See Documentation/admin-guide/pm/cpuidle.rst and
Documentation/driver-api/pm/cpuidle.rst for more information.
diff --git a/Documentation/admin-guide/pm/cpuidle.rst b/Documentation/admin-guide/pm/cpuidle.rst
index 5605cc6f9560..a96a423e3779 100644
--- a/Documentation/admin-guide/pm/cpuidle.rst
+++ b/Documentation/admin-guide/pm/cpuidle.rst
@@ -159,17 +159,15 @@ governor uses that information depends on what algorithm is implemented by it
and that is the primary reason for having more than one governor in the
``CPUIdle`` subsystem.
-There are three ``CPUIdle`` governors available, ``menu``, `TEO <teo-gov_>`_
-and ``ladder``. Which of them is used by default depends on the configuration
-of the kernel and in particular on whether or not the scheduler tick can be
-`stopped by the idle loop <idle-cpus-and-tick_>`_. It is possible to change the
-governor at run time if the ``cpuidle_sysfs_switch`` command line parameter has
-been passed to the kernel, but that is not safe in general, so it should not be
-done on production systems (that may change in the future, though). The name of
-the ``CPUIdle`` governor currently used by the kernel can be read from the
-:file:`current_governor_ro` (or :file:`current_governor` if
-``cpuidle_sysfs_switch`` is present in the kernel command line) file under
-:file:`/sys/devices/system/cpu/cpuidle/` in ``sysfs``.
+There are four ``CPUIdle`` governors available, ``menu``, `TEO <teo-gov_>`_,
+``ladder`` and ``haltpoll``. Which of them is used by default depends on the
+configuration of the kernel and in particular on whether or not the scheduler
+tick can be `stopped by the idle loop <idle-cpus-and-tick_>`_. Available
+governors can be read from the :file:`available_governors`, and the governor
+can be changed at runtime. The name of the ``CPUIdle`` governor currently
+used by the kernel can be read from the :file:`current_governor_ro` or
+:file:`current_governor` file under :file:`/sys/devices/system/cpu/cpuidle/`
+in ``sysfs``.
Which ``CPUIdle`` driver is used, on the other hand, usually depends on the
platform the kernel is running on, but there are platforms with more than one
diff --git a/Documentation/admin-guide/pm/intel-speed-select.rst b/Documentation/admin-guide/pm/intel-speed-select.rst
new file mode 100644
index 000000000000..b2ca601c21c6
--- /dev/null
+++ b/Documentation/admin-guide/pm/intel-speed-select.rst
@@ -0,0 +1,917 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============================================================
+Intel(R) Speed Select Technology User Guide
+============================================================
+
+The Intel(R) Speed Select Technology (Intel(R) SST) provides a powerful new
+collection of features that give more granular control over CPU performance.
+With Intel(R) SST, one server can be configured for power and performance for a
+variety of diverse workload requirements.
+
+Refer to the links below for an overview of the technology:
+
+- https://www.intel.com/content/www/us/en/architecture-and-technology/speed-select-technology-article.html
+- https://builders.intel.com/docs/networkbuilders/intel-speed-select-technology-base-frequency-enhancing-performance.pdf
+
+These capabilities are further enhanced in some of the newer generations of
+server platforms where these features can be enumerated and controlled
+dynamically without pre-configuring via BIOS setup options. This dynamic
+configuration is done via mailbox commands to the hardware. One way to enumerate
+and configure these features is by using the Intel Speed Select utility.
+
+This document explains how to use the Intel Speed Select tool to enumerate and
+control Intel(R) SST features. This document gives example commands and explains
+how these commands change the power and performance profile of the system under
+test. Using this tool as an example, customers can replicate the messaging
+implemented in the tool in their production software.
+
+intel-speed-select configuration tool
+======================================
+
+Most Linux distribution packages may include the "intel-speed-select" tool. If not,
+it can be built by downloading the Linux kernel tree from kernel.org. Once
+downloaded, the tool can be built without building the full kernel.
+
+From the kernel tree, run the following commands::
+
+# cd tools/power/x86/intel-speed-select/
+# make
+# make install
+
+Getting Help
+------------
+
+To get help with the tool, execute the command below::
+
+# intel-speed-select --help
+
+The top-level help describes arguments and features. Notice that there is a
+multi-level help structure in the tool. For example, to get help for the feature "perf-profile"::
+
+# intel-speed-select perf-profile --help
+
+To get help on a command, another level of help is provided. For example for the command info "info"::
+
+# intel-speed-select perf-profile info --help
+
+Summary of platform capability
+------------------------------
+To check the current platform and driver capaibilities, execute::
+
+#intel-speed-select --info
+
+For example on a test system::
+
+ # intel-speed-select --info
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ Platform: API version : 1
+ Platform: Driver version : 1
+ Platform: mbox supported : 1
+ Platform: mmio supported : 1
+ Intel(R) SST-PP (feature perf-profile) is supported
+ TDP level change control is unlocked, max level: 4
+ Intel(R) SST-TF (feature turbo-freq) is supported
+ Intel(R) SST-BF (feature base-freq) is not supported
+ Intel(R) SST-CP (feature core-power) is supported
+
+Intel(R) Speed Select Technology - Performance Profile (Intel(R) SST-PP)
+------------------------------------------------------------------------
+
+This feature allows configuration of a server dynamically based on workload
+performance requirements. This helps users during deployment as they do not have
+to choose a specific server configuration statically. This Intel(R) Speed Select
+Technology - Performance Profile (Intel(R) SST-PP) feature introduces a mechanism
+that allows multiple optimized performance profiles per system. Each profile
+defines a set of CPUs that need to be online and rest offline to sustain a
+guaranteed base frequency. Once the user issues a command to use a specific
+performance profile and meet CPU online/offline requirement, the user can expect
+a change in the base frequency dynamically. This feature is called
+"perf-profile" when using the Intel Speed Select tool.
+
+Number or performance levels
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+There can be multiple performance profiles on a system. To get the number of
+profiles, execute the command below::
+
+ # intel-speed-select perf-profile get-config-levels
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-0
+ get-config-levels:4
+ package-1
+ die-0
+ cpu-14
+ get-config-levels:4
+
+On this system under test, there are 4 performance profiles in addition to the
+base performance profile (which is performance level 0).
+
+Lock/Unlock status
+~~~~~~~~~~~~~~~~~~
+
+Even if there are multiple performance profiles, it is possible that that they
+are locked. If they are locked, users cannot issue a command to change the
+performance state. It is possible that there is a BIOS setup to unlock or check
+with your system vendor.
+
+To check if the system is locked, execute the following command::
+
+ # intel-speed-select perf-profile get-lock-status
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-0
+ get-lock-status:0
+ package-1
+ die-0
+ cpu-14
+ get-lock-status:0
+
+In this case, lock status is 0, which means that the system is unlocked.
+
+Properties of a performance level
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To get properties of a specific performance level (For example for the level 0, below), execute the command below::
+
+ # intel-speed-select perf-profile info -l 0
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-0
+ perf-profile-level-0
+ cpu-count:28
+ enable-cpu-mask:000003ff,f0003fff
+ enable-cpu-list:0,1,2,3,4,5,6,7,8,9,10,11,12,13,28,29,30,31,32,33,34,35,36,37,38,39,40,41
+ thermal-design-power-ratio:26
+ base-frequency(MHz):2600
+ speed-select-turbo-freq:disabled
+ speed-select-base-freq:disabled
+ ...
+ ...
+
+Here -l option is used to specify a performance level.
+
+If the option -l is omitted, then this command will print information about all
+the performance levels. The above command is printing properties of the
+performance level 0.
+
+For this performance profile, the list of CPUs displayed by the
+"enable-cpu-mask/enable-cpu-list" at the max can be "online." When that
+condition is met, then base frequency of 2600 MHz can be maintained. To
+understand more, execute "intel-speed-select perf-profile info" for performance
+level 4::
+
+ # intel-speed-select perf-profile info -l 4
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-0
+ perf-profile-level-4
+ cpu-count:28
+ enable-cpu-mask:000000fa,f0000faf
+ enable-cpu-list:0,1,2,3,5,7,8,9,10,11,28,29,30,31,33,35,36,37,38,39
+ thermal-design-power-ratio:28
+ base-frequency(MHz):2800
+ speed-select-turbo-freq:disabled
+ speed-select-base-freq:unsupported
+ ...
+ ...
+
+There are fewer CPUs in the "enable-cpu-mask/enable-cpu-list". Consequently, if
+the user only keeps these CPUs online and the rest "offline," then the base
+frequency is increased to 2.8 GHz compared to 2.6 GHz at performance level 0.
+
+Get current performance level
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To get the current performance level, execute::
+
+ # intel-speed-select perf-profile get-config-current-level
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-0
+ get-config-current_level:0
+
+First verify that the base_frequency displayed by the cpufreq sysfs is correct::
+
+ # cat /sys/devices/system/cpu/cpu0/cpufreq/base_frequency
+ 2600000
+
+This matches the base-frequency (MHz) field value displayed from the
+"perf-profile info" command for performance level 0(cpufreq frequency is in
+KHz).
+
+To check if the average frequency is equal to the base frequency for a 100% busy
+workload, disable turbo::
+
+# echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo
+
+Then runs a busy workload on all CPUs, for example::
+
+#stress -c 64
+
+To verify the base frequency, run turbostat::
+
+ #turbostat -c 0-13 --show Package,Core,CPU,Bzy_MHz -i 1
+
+ Package Core CPU Bzy_MHz
+ - - 2600
+ 0 0 0 2600
+ 0 1 1 2600
+ 0 2 2 2600
+ 0 3 3 2600
+ 0 4 4 2600
+ . . . .
+
+
+Changing performance level
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To the change the performance level to 4, execute::
+
+ # intel-speed-select -d perf-profile set-config-level -l 4 -o
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-0
+ perf-profile
+ set_tdp_level:success
+
+In the command above, "-o" is optional. If it is specified, then it will also
+offline CPUs which are not present in the enable_cpu_mask for this performance
+level.
+
+Now if the base_frequency is checked::
+
+ #cat /sys/devices/system/cpu/cpu0/cpufreq/base_frequency
+ 2800000
+
+Which shows that the base frequency now increased from 2600 MHz at performance
+level 0 to 2800 MHz at performance level 4. As a result, any workload, which can
+use fewer CPUs, can see a boost of 200 MHz compared to performance level 0.
+
+Check presence of other Intel(R) SST features
+---------------------------------------------
+
+Each of the performance profiles also specifies weather there is support of
+other two Intel(R) SST features (Intel(R) Speed Select Technology - Base Frequency
+(Intel(R) SST-BF) and Intel(R) Speed Select Technology - Turbo Frequency (Intel
+SST-TF)).
+
+For example, from the output of "perf-profile info" above, for level 0 and level
+4:
+
+For level 0::
+ speed-select-turbo-freq:disabled
+ speed-select-base-freq:disabled
+
+For level 4::
+ speed-select-turbo-freq:disabled
+ speed-select-base-freq:unsupported
+
+Given these results, the "speed-select-base-freq" (Intel(R) SST-BF) in level 4
+changed from "disabled" to "unsupported" compared to performance level 0.
+
+This means that at performance level 4, the "speed-select-base-freq" feature is
+not supported. However, at performance level 0, this feature is "supported", but
+currently "disabled", meaning the user has not activated this feature. Whereas
+"speed-select-turbo-freq" (Intel(R) SST-TF) is supported at both performance
+levels, but currently not activated by the user.
+
+The Intel(R) SST-BF and the Intel(R) SST-TF features are built on a foundation
+technology called Intel(R) Speed Select Technology - Core Power (Intel(R) SST-CP).
+The platform firmware enables this feature when Intel(R) SST-BF or Intel(R) SST-TF
+is supported on a platform.
+
+Intel(R) Speed Select Technology Core Power (Intel(R) SST-CP)
+---------------------------------------------------------------
+
+Intel(R) Speed Select Technology Core Power (Intel(R) SST-CP) is an interface that
+allows users to define per core priority. This defines a mechanism to distribute
+power among cores when there is a power constrained scenario. This defines a
+class of service (CLOS) configuration.
+
+The user can configure up to 4 class of service configurations. Each CLOS group
+configuration allows definitions of parameters, which affects how the frequency
+can be limited and power is distributed. Each CPU core can be tied to a class of
+service and hence an associated priority. The granularity is at core level not
+at per CPU level.
+
+Enable CLOS based prioritization
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To use CLOS based prioritization feature, firmware must be informed to enable
+and use a priority type. There is a default per platform priority type, which
+can be changed with optional command line parameter.
+
+To enable and check the options, execute::
+
+ # intel-speed-select core-power enable --help
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ Enable core-power for a package/die
+ Clos Enable: Specify priority type with [--priority|-p]
+ 0: Proportional, 1: Ordered
+
+There are two types of priority types:
+
+- Ordered
+
+Priority for ordered throttling is defined based on the index of the assigned
+CLOS group. Where CLOS0 gets highest priority (throttled last).
+
+Priority order is:
+CLOS0 > CLOS1 > CLOS2 > CLOS3.
+
+- Proportional
+
+When proportional priority is used, there is an additional parameter called
+frequency_weight, which can be specified per CLOS group. The goal of
+proportional priority is to provide each core with the requested min., then
+distribute all remaining (excess/deficit) budgets in proportion to a defined
+weight. This proportional priority can be configured using "core-power config"
+command.
+
+To enable with the platform default priority type, execute::
+
+ # intel-speed-select core-power enable
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-0
+ core-power
+ enable:success
+ package-1
+ die-0
+ cpu-6
+ core-power
+ enable:success
+
+The scope of this enable is per package or die scoped when a package contains
+multiple dies. To check if CLOS is enabled and get priority type, "core-power
+info" command can be used. For example to check the status of core-power feature
+on CPU 0, execute::
+
+ # intel-speed-select -c 0 core-power info
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-0
+ core-power
+ support-status:supported
+ enable-status:enabled
+ clos-enable-status:enabled
+ priority-type:proportional
+ package-1
+ die-0
+ cpu-24
+ core-power
+ support-status:supported
+ enable-status:enabled
+ clos-enable-status:enabled
+ priority-type:proportional
+
+Configuring CLOS groups
+~~~~~~~~~~~~~~~~~~~~~~~
+
+Each CLOS group has its own attributes including min, max, freq_weight and
+desired. These parameters can be configured with "core-power config" command.
+Defaults will be used if user skips setting a parameter except clos id, which is
+mandatory. To check core-power config options, execute::
+
+ # intel-speed-select core-power config --help
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ Set core-power configuration for one of the four clos ids
+ Specify targeted clos id with [--clos|-c]
+ Specify clos Proportional Priority [--weight|-w]
+ Specify clos min in MHz with [--min|-n]
+ Specify clos max in MHz with [--max|-m]
+
+For example::
+
+ # intel-speed-select core-power config -c 0
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ clos epp is not specified, default: 0
+ clos frequency weight is not specified, default: 0
+ clos min is not specified, default: 0 MHz
+ clos max is not specified, default: 25500 MHz
+ clos desired is not specified, default: 0
+ package-0
+ die-0
+ cpu-0
+ core-power
+ config:success
+ package-1
+ die-0
+ cpu-6
+ core-power
+ config:success
+
+The user has the option to change defaults. For example, the user can change the
+"min" and set the base frequency to always get guaranteed base frequency.
+
+Get the current CLOS configuration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To check the current configuration, "core-power get-config" can be used. For
+example, to get the configuration of CLOS 0::
+
+ # intel-speed-select core-power get-config -c 0
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-0
+ core-power
+ clos:0
+ epp:0
+ clos-proportional-priority:0
+ clos-min:0 MHz
+ clos-max:Max Turbo frequency
+ clos-desired:0 MHz
+ package-1
+ die-0
+ cpu-24
+ core-power
+ clos:0
+ epp:0
+ clos-proportional-priority:0
+ clos-min:0 MHz
+ clos-max:Max Turbo frequency
+ clos-desired:0 MHz
+
+Associating a CPU with a CLOS group
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To associate a CPU to a CLOS group "core-power assoc" command can be used::
+
+ # intel-speed-select core-power assoc --help
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ Associate a clos id to a CPU
+ Specify targeted clos id with [--clos|-c]
+
+
+For example to associate CPU 10 to CLOS group 3, execute::
+
+ # intel-speed-select -c 10 core-power assoc -c 3
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-10
+ core-power
+ assoc:success
+
+Once a CPU is associated, its sibling CPUs are also associated to a CLOS group.
+Once associated, avoid changing Linux "cpufreq" subsystem scaling frequency
+limits.
+
+To check the existing association for a CPU, "core-power get-assoc" command can
+be used. For example, to get association of CPU 10, execute::
+
+ # intel-speed-select -c 10 core-power get-assoc
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-1
+ die-0
+ cpu-10
+ get-assoc
+ clos:3
+
+This shows that CPU 10 is part of a CLOS group 3.
+
+
+Disable CLOS based prioritization
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To disable, execute::
+
+# intel-speed-select core-power disable
+
+Some features like Intel(R) SST-TF can only be enabled when CLOS based prioritization
+is enabled. For this reason, disabling while Intel(R) SST-TF is enabled can cause
+Intel(R) SST-TF to fail. This will cause the "disable" command to display an error
+if Intel(R) SST-TF is already enabled. In turn, to disable, the Intel(R) SST-TF
+feature must be disabled first.
+
+Intel(R) Speed Select Technology - Base Frequency (Intel(R) SST-BF)
+-------------------------------------------------------------------
+
+The Intel(R) Speed Select Technology - Base Frequency (Intel(R) SST-BF) feature lets
+the user control base frequency. If some critical workload threads demand
+constant high guaranteed performance, then this feature can be used to execute
+the thread at higher base frequency on specific sets of CPUs (high priority
+CPUs) at the cost of lower base frequency (low priority CPUs) on other CPUs.
+This feature does not require offline of the low priority CPUs.
+
+The support of Intel(R) SST-BF depends on the Intel(R) Speed Select Technology -
+Performance Profile (Intel(R) SST-PP) performance level configuration. It is
+possible that only certain performance levels support Intel(R) SST-BF. It is also
+possible that only base performance level (level = 0) has support of Intel
+SST-BF. Consequently, first select the desired performance level to enable this
+feature.
+
+In the system under test here, Intel(R) SST-BF is supported at the base
+performance level 0, but currently disabled. For example for the level 0::
+
+ # intel-speed-select -c 0 perf-profile info -l 0
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-0
+ perf-profile-level-0
+ ...
+
+ speed-select-base-freq:disabled
+ ...
+
+Before enabling Intel(R) SST-BF and measuring its impact on a workload
+performance, execute some workload and measure performance and get a baseline
+performance to compare against.
+
+Here the user wants more guaranteed performance. For this reason, it is likely
+that turbo is disabled. To disable turbo, execute::
+
+#echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo
+
+Based on the output of the "intel-speed-select perf-profile info -l 0" base
+frequency of guaranteed frequency 2600 MHz.
+
+
+Measure baseline performance for comparison
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To compare, pick a multi-threaded workload where each thread can be scheduled on
+separate CPUs. "Hackbench pipe" test is a good example on how to improve
+performance using Intel(R) SST-BF.
+
+Below, the workload is measuring average scheduler wakeup latency, so a lower
+number means better performance::
+
+ # taskset -c 3,4 perf bench -r 100 sched pipe
+ # Running 'sched/pipe' benchmark:
+ # Executed 1000000 pipe operations between two processes
+ Total time: 6.102 [sec]
+ 6.102445 usecs/op
+ 163868 ops/sec
+
+While running the above test, if we take turbostat output, it will show us that
+2 of the CPUs are busy and reaching max. frequency (which would be the base
+frequency as the turbo is disabled). The turbostat output::
+
+ #turbostat -c 0-13 --show Package,Core,CPU,Bzy_MHz -i 1
+ Package Core CPU Bzy_MHz
+ 0 0 0 1000
+ 0 1 1 1005
+ 0 2 2 1000
+ 0 3 3 2600
+ 0 4 4 2600
+ 0 5 5 1000
+ 0 6 6 1000
+ 0 7 7 1005
+ 0 8 8 1005
+ 0 9 9 1000
+ 0 10 10 1000
+ 0 11 11 995
+ 0 12 12 1000
+ 0 13 13 1000
+
+From the above turbostat output, both CPU 3 and 4 are very busy and reaching
+full guaranteed frequency of 2600 MHz.
+
+Intel(R) SST-BF Capabilities
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To get capabilities of Intel(R) SST-BF for the current performance level 0,
+execute::
+
+ # intel-speed-select base-freq info -l 0
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-0
+ speed-select-base-freq
+ high-priority-base-frequency(MHz):3000
+ high-priority-cpu-mask:00000216,00002160
+ high-priority-cpu-list:5,6,8,13,33,34,36,41
+ low-priority-base-frequency(MHz):2400
+ tjunction-temperature(C):125
+ thermal-design-power(W):205
+
+The above capabilities show that there are some CPUs on this system that can
+offer base frequency of 3000 MHz compared to the standard base frequency at this
+performance levels. Nevertheless, these CPUs are fixed, and they are presented
+via high-priority-cpu-list/high-priority-cpu-mask. But if this Intel(R) SST-BF
+feature is selected, the low priorities CPUs (which are not in
+high-priority-cpu-list) can only offer up to 2400 MHz. As a result, if this
+clipping of low priority CPUs is acceptable, then the user can enable Intel
+SST-BF feature particularly for the above "sched pipe" workload since only two
+CPUs are used, they can be scheduled on high priority CPUs and can get boost of
+400 MHz.
+
+Enable Intel(R) SST-BF
+~~~~~~~~~~~~~~~~~~~~~~
+
+To enable Intel(R) SST-BF feature, execute::
+
+ # intel-speed-select base-freq enable -a
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-0
+ base-freq
+ enable:success
+ package-1
+ die-0
+ cpu-14
+ base-freq
+ enable:success
+
+In this case, -a option is optional. This not only enables Intel(R) SST-BF, but it
+also adjusts the priority of cores using Intel(R) Speed Select Technology Core
+Power (Intel(R) SST-CP) features. This option sets the minimum performance of each
+Intel(R) Speed Select Technology - Performance Profile (Intel(R) SST-PP) class to
+maximum performance so that the hardware will give maximum performance possible
+for each CPU.
+
+If -a option is not used, then the following steps are required before enabling
+Intel(R) SST-BF:
+
+- Discover Intel(R) SST-BF and note low and high priority base frequency
+- Note the high prioity CPU list
+- Enable CLOS using core-power feature set
+- Configure CLOS parameters. Use CLOS.min to set to minimum performance
+- Subscribe desired CPUs to CLOS groups
+
+With this configuration, if the same workload is executed by pinning the
+workload to high priority CPUs (CPU 5 and 6 in this case)::
+
+ #taskset -c 5,6 perf bench -r 100 sched pipe
+ # Running 'sched/pipe' benchmark:
+ # Executed 1000000 pipe operations between two processes
+ Total time: 5.627 [sec]
+ 5.627922 usecs/op
+ 177685 ops/sec
+
+This way, by enabling Intel(R) SST-BF, the performance of this benchmark is
+improved (latency reduced) by 7.79%. From the turbostat output, it can be
+observed that the high priority CPUs reached 3000 MHz compared to 2600 MHz.
+The turbostat output::
+
+ #turbostat -c 0-13 --show Package,Core,CPU,Bzy_MHz -i 1
+ Package Core CPU Bzy_MHz
+ 0 0 0 2151
+ 0 1 1 2166
+ 0 2 2 2175
+ 0 3 3 2175
+ 0 4 4 2175
+ 0 5 5 3000
+ 0 6 6 3000
+ 0 7 7 2180
+ 0 8 8 2662
+ 0 9 9 2176
+ 0 10 10 2175
+ 0 11 11 2176
+ 0 12 12 2176
+ 0 13 13 2661
+
+Disable Intel(R) SST-BF
+~~~~~~~~~~~~~~~~~~~~~~~
+
+To disable the Intel(R) SST-BF feature, execute::
+
+# intel-speed-select base-freq disable -a
+
+
+Intel(R) Speed Select Technology - Turbo Frequency (Intel(R) SST-TF)
+--------------------------------------------------------------------
+
+This feature enables the ability to set different "All core turbo ratio limits"
+to cores based on the priority. By using this feature, some cores can be
+configured to get higher turbo frequency by designating them as high priority at
+the cost of lower or no turbo frequency on the low priority cores.
+
+For this reason, this feature is only useful when system is busy utilizing all
+CPUs, but the user wants some configurable option to get high performance on
+some CPUs.
+
+The support of Intel(R) Speed Select Technology - Turbo Frequency (Intel(R) SST-TF)
+depends on the Intel(R) Speed Select Technology - Performance Profile (Intel
+SST-PP) performance level configuration. It is possible that only a certain
+performance level supports Intel(R) SST-TF. It is also possible that only the base
+performance level (level = 0) has the support of Intel(R) SST-TF. Hence, first
+select the desired performance level to enable this feature.
+
+In the system under test here, Intel(R) SST-TF is supported at the base
+performance level 0, but currently disabled::
+
+ # intel-speed-select -c 0 perf-profile info -l 0
+ Intel(R) Speed Select Technology
+ package-0
+ die-0
+ cpu-0
+ perf-profile-level-0
+ ...
+ ...
+ speed-select-turbo-freq:disabled
+ ...
+ ...
+
+
+To check if performance can be improved using Intel(R) SST-TF feature, get the turbo
+frequency properties with Intel(R) SST-TF enabled and compare to the base turbo
+capability of this system.
+
+Get Base turbo capability
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To get the base turbo capability of performance level 0, execute::
+
+ # intel-speed-select perf-profile info -l 0
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-0
+ perf-profile-level-0
+ ...
+ ...
+ turbo-ratio-limits-sse
+ bucket-0
+ core-count:2
+ max-turbo-frequency(MHz):3200
+ bucket-1
+ core-count:4
+ max-turbo-frequency(MHz):3100
+ bucket-2
+ core-count:6
+ max-turbo-frequency(MHz):3100
+ bucket-3
+ core-count:8
+ max-turbo-frequency(MHz):3100
+ bucket-4
+ core-count:10
+ max-turbo-frequency(MHz):3100
+ bucket-5
+ core-count:12
+ max-turbo-frequency(MHz):3100
+ bucket-6
+ core-count:14
+ max-turbo-frequency(MHz):3100
+ bucket-7
+ core-count:16
+ max-turbo-frequency(MHz):3100
+
+Based on the data above, when all the CPUS are busy, the max. frequency of 3100
+MHz can be achieved. If there is some busy workload on cpu 0 - 11 (e.g. stress)
+and on CPU 12 and 13, execute "hackbench pipe" workload::
+
+ # taskset -c 12,13 perf bench -r 100 sched pipe
+ # Running 'sched/pipe' benchmark:
+ # Executed 1000000 pipe operations between two processes
+ Total time: 5.705 [sec]
+ 5.705488 usecs/op
+ 175269 ops/sec
+
+The turbostat output::
+
+ #turbostat -c 0-13 --show Package,Core,CPU,Bzy_MHz -i 1
+ Package Core CPU Bzy_MHz
+ 0 0 0 3000
+ 0 1 1 3000
+ 0 2 2 3000
+ 0 3 3 3000
+ 0 4 4 3000
+ 0 5 5 3100
+ 0 6 6 3100
+ 0 7 7 3000
+ 0 8 8 3100
+ 0 9 9 3000
+ 0 10 10 3000
+ 0 11 11 3000
+ 0 12 12 3100
+ 0 13 13 3100
+
+Based on turbostat output, the performance is limited by frequency cap of 3100
+MHz. To check if the hackbench performance can be improved for CPU 12 and CPU
+13, first check the capability of the Intel(R) SST-TF feature for this performance
+level.
+
+Get Intel(R) SST-TF Capability
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To get the capability, the "turbo-freq info" command can be used::
+
+ # intel-speed-select turbo-freq info -l 0
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-0
+ speed-select-turbo-freq
+ bucket-0
+ high-priority-cores-count:2
+ high-priority-max-frequency(MHz):3200
+ high-priority-max-avx2-frequency(MHz):3200
+ high-priority-max-avx512-frequency(MHz):3100
+ bucket-1
+ high-priority-cores-count:4
+ high-priority-max-frequency(MHz):3100
+ high-priority-max-avx2-frequency(MHz):3000
+ high-priority-max-avx512-frequency(MHz):2900
+ bucket-2
+ high-priority-cores-count:6
+ high-priority-max-frequency(MHz):3100
+ high-priority-max-avx2-frequency(MHz):3000
+ high-priority-max-avx512-frequency(MHz):2900
+ speed-select-turbo-freq-clip-frequencies
+ low-priority-max-frequency(MHz):2600
+ low-priority-max-avx2-frequency(MHz):2400
+ low-priority-max-avx512-frequency(MHz):2100
+
+Based on the output above, there is an Intel(R) SST-TF bucket for which there are
+two high priority cores. If only two high priority cores are set, then max.
+turbo frequency on those cores can be increased to 3200 MHz. This is 100 MHz
+more than the base turbo capability for all cores.
+
+In turn, for the hackbench workload, two CPUs can be set as high priority and
+rest as low priority. One side effect is that once enabled, the low priority
+cores will be clipped to a lower frequency of 2600 MHz.
+
+Enable Intel(R) SST-TF
+~~~~~~~~~~~~~~~~~~~~~~
+
+To enable Intel(R) SST-TF, execute::
+
+ # intel-speed-select -c 12,13 turbo-freq enable -a
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-12
+ turbo-freq
+ enable:success
+ package-0
+ die-0
+ cpu-13
+ turbo-freq
+ enable:success
+ package--1
+ die-0
+ cpu-63
+ turbo-freq --auto
+ enable:success
+
+In this case, the option "-a" is optional. If set, it enables Intel(R) SST-TF
+feature and also sets the CPUs to high and and low priority using Intel Speed
+Select Technology Core Power (Intel(R) SST-CP) features. The CPU numbers passed
+with "-c" arguments are marked as high priority, including its siblings.
+
+If -a option is not used, then the following steps are required before enabling
+Intel(R) SST-TF:
+
+- Discover Intel(R) SST-TF and note buckets of high priority cores and maximum frequency
+
+- Enable CLOS using core-power feature set - Configure CLOS parameters
+
+- Subscribe desired CPUs to CLOS groups making sure that high priority cores are set to the maximum frequency
+
+If the same hackbench workload is executed, schedule hackbench threads on high
+priority CPUs::
+
+ #taskset -c 12,13 perf bench -r 100 sched pipe
+ # Running 'sched/pipe' benchmark:
+ # Executed 1000000 pipe operations between two processes
+ Total time: 5.510 [sec]
+ 5.510165 usecs/op
+ 180826 ops/sec
+
+This improved performance by around 3.3% improvement on a busy system. Here the
+turbostat output will show that the CPU 12 and CPU 13 are getting 100 MHz boost.
+The turbostat output::
+
+ #turbostat -c 0-13 --show Package,Core,CPU,Bzy_MHz -i 1
+ Package Core CPU Bzy_MHz
+ ...
+ 0 12 12 3200
+ 0 13 13 3200
diff --git a/Documentation/admin-guide/pm/intel_pstate.rst b/Documentation/admin-guide/pm/intel_pstate.rst
index ad392f3aee06..39d80bc29ccd 100644
--- a/Documentation/admin-guide/pm/intel_pstate.rst
+++ b/Documentation/admin-guide/pm/intel_pstate.rst
@@ -62,9 +62,10 @@ on the capabilities of the processor.
Active Mode
-----------
-This is the default operation mode of ``intel_pstate``. If it works in this
-mode, the ``scaling_driver`` policy attribute in ``sysfs`` for all ``CPUFreq``
-policies contains the string "intel_pstate".
+This is the default operation mode of ``intel_pstate`` for processors with
+hardware-managed P-states (HWP) support. If it works in this mode, the
+``scaling_driver`` policy attribute in ``sysfs`` for all ``CPUFreq`` policies
+contains the string "intel_pstate".
In this mode the driver bypasses the scaling governors layer of ``CPUFreq`` and
provides its own scaling algorithms for P-state selection. Those algorithms
@@ -138,12 +139,13 @@ internal P-state selection logic to be less performance-focused.
Active Mode Without HWP
~~~~~~~~~~~~~~~~~~~~~~~
-This is the default operation mode for processors that do not support the HWP
-feature. It also is used by default with the ``intel_pstate=no_hwp`` argument
-in the kernel command line. However, in this mode ``intel_pstate`` may refuse
-to work with the given processor if it does not recognize it. [Note that
-``intel_pstate`` will never refuse to work with any processor with the HWP
-feature enabled.]
+This operation mode is optional for processors that do not support the HWP
+feature or when the ``intel_pstate=no_hwp`` argument is passed to the kernel in
+the command line. The active mode is used in those cases if the
+``intel_pstate=active`` argument is passed to the kernel in the command line.
+In this mode ``intel_pstate`` may refuse to work with processors that are not
+recognized by it. [Note that ``intel_pstate`` will never refuse to work with
+any processor with the HWP feature enabled.]
In this mode ``intel_pstate`` registers utilization update callbacks with the
CPU scheduler in order to run a P-state selection algorithm, either
@@ -188,10 +190,14 @@ is not set.
Passive Mode
------------
-This mode is used if the ``intel_pstate=passive`` argument is passed to the
-kernel in the command line (it implies the ``intel_pstate=no_hwp`` setting too).
-Like in the active mode without HWP support, in this mode ``intel_pstate`` may
-refuse to work with the given processor if it does not recognize it.
+This is the default operation mode of ``intel_pstate`` for processors without
+hardware-managed P-states (HWP) support. It is always used if the
+``intel_pstate=passive`` argument is passed to the kernel in the command line
+regardless of whether or not the given processor supports HWP. [Note that the
+``intel_pstate=no_hwp`` setting implies ``intel_pstate=passive`` if it is used
+without ``intel_pstate=active``.] Like in the active mode without HWP support,
+in this mode ``intel_pstate`` may refuse to work with processors that are not
+recognized by it.
If the driver works in this mode, the ``scaling_driver`` policy attribute in
``sysfs`` for all ``CPUFreq`` policies contains the string "intel_cpufreq".
diff --git a/Documentation/admin-guide/pm/working-state.rst b/Documentation/admin-guide/pm/working-state.rst
index 0a38cdf39df1..f40994c422dc 100644
--- a/Documentation/admin-guide/pm/working-state.rst
+++ b/Documentation/admin-guide/pm/working-state.rst
@@ -13,3 +13,4 @@ Working-State Power Management
intel_pstate
cpufreq_drivers
intel_epb
+ intel-speed-select
diff --git a/Documentation/driver-api/pm/cpuidle.rst b/Documentation/driver-api/pm/cpuidle.rst
index 006cf6db40c6..3588bf078566 100644
--- a/Documentation/driver-api/pm/cpuidle.rst
+++ b/Documentation/driver-api/pm/cpuidle.rst
@@ -68,9 +68,8 @@ only one in the list (that is, the list was empty before) or the value of its
governor currently in use, or the name of the new governor was passed to the
kernel as the value of the ``cpuidle.governor=`` command line parameter, the new
governor will be used from that point on (there can be only one ``CPUIdle``
-governor in use at a time). Also, if ``cpuidle_sysfs_switch`` is passed to the
-kernel in the command line, user space can choose the ``CPUIdle`` governor to
-use at run time via ``sysfs``.
+governor in use at a time). Also, user space can choose the ``CPUIdle``
+governor to use at run time via ``sysfs``.
Once registered, ``CPUIdle`` governors cannot be unregistered, so it is not
practical to put them into loadable kernel modules.
diff --git a/Documentation/driver-api/pm/devices.rst b/Documentation/driver-api/pm/devices.rst
index f66c7b9126ea..946ad0b94e31 100644
--- a/Documentation/driver-api/pm/devices.rst
+++ b/Documentation/driver-api/pm/devices.rst
@@ -349,7 +349,7 @@ the phases are: ``prepare``, ``suspend``, ``suspend_late``, ``suspend_noirq``.
PM core will skip the ``suspend``, ``suspend_late`` and
``suspend_noirq`` phases as well as all of the corresponding phases of
the subsequent device resume for all of these devices. In that case,
- the ``->complete`` callback will be invoked directly after the
+ the ``->complete`` callback will be the next one invoked after the
``->prepare`` callback and is entirely responsible for putting the
device into a consistent state as appropriate.
@@ -361,9 +361,9 @@ the phases are: ``prepare``, ``suspend``, ``suspend_late``, ``suspend_noirq``.
runtime PM disabled.
This feature also can be controlled by device drivers by using the
- ``DPM_FLAG_NEVER_SKIP`` and ``DPM_FLAG_SMART_PREPARE`` driver power
- management flags. [Typically, they are set at the time the driver is
- probed against the device in question by passing them to the
+ ``DPM_FLAG_NO_DIRECT_COMPLETE`` and ``DPM_FLAG_SMART_PREPARE`` driver
+ power management flags. [Typically, they are set at the time the driver
+ is probed against the device in question by passing them to the
:c:func:`dev_pm_set_driver_flags` helper function.] If the first of
these flags is set, the PM core will not apply the direct-complete
procedure described above to the given device and, consequenty, to any
@@ -383,11 +383,15 @@ the phases are: ``prepare``, ``suspend``, ``suspend_late``, ``suspend_noirq``.
``->suspend`` methods provided by subsystems (bus types and PM domains
in particular) must follow an additional rule regarding what can be done
to the devices before their drivers' ``->suspend`` methods are called.
- Namely, they can only resume the devices from runtime suspend by
- calling :c:func:`pm_runtime_resume` for them, if that is necessary, and
+ Namely, they may resume the devices from runtime suspend by
+ calling :c:func:`pm_runtime_resume` for them, if that is necessary, but
they must not update the state of the devices in any other way at that
time (in case the drivers need to resume the devices from runtime
- suspend in their ``->suspend`` methods).
+ suspend in their ``->suspend`` methods). In fact, the PM core prevents
+ subsystems or drivers from putting devices into runtime suspend at
+ these times by calling :c:func:`pm_runtime_get_noresume` before issuing
+ the ``->prepare`` callback (and calling :c:func:`pm_runtime_put` after
+ issuing the ``->complete`` callback).
3. For a number of devices it is convenient to split suspend into the
"quiesce device" and "save device state" phases, in which cases
@@ -459,22 +463,22 @@ When resuming from freeze, standby or memory sleep, the phases are:
Note, however, that new children may be registered below the device as
soon as the ``->resume`` callbacks occur; it's not necessary to wait
- until the ``complete`` phase with that.
+ until the ``complete`` phase runs.
Moreover, if the preceding ``->prepare`` callback returned a positive
number, the device may have been left in runtime suspend throughout the
- whole system suspend and resume (the ``suspend``, ``suspend_late``,
- ``suspend_noirq`` phases of system suspend and the ``resume_noirq``,
- ``resume_early``, ``resume`` phases of system resume may have been
- skipped for it). In that case, the ``->complete`` callback is entirely
+ whole system suspend and resume (its ``->suspend``, ``->suspend_late``,
+ ``->suspend_noirq``, ``->resume_noirq``,
+ ``->resume_early``, and ``->resume`` callbacks may have been
+ skipped). In that case, the ``->complete`` callback is entirely
responsible for putting the device into a consistent state after system
suspend if necessary. [For example, it may need to queue up a runtime
resume request for the device for this purpose.] To check if that is
the case, the ``->complete`` callback can consult the device's
- ``power.direct_complete`` flag. Namely, if that flag is set when the
- ``->complete`` callback is being run, it has been called directly after
- the preceding ``->prepare`` and special actions may be required
- to make the device work correctly afterward.
+ ``power.direct_complete`` flag. If that flag is set when the
+ ``->complete`` callback is being run then the direct-complete mechanism
+ was used, and special actions may be required to make the device work
+ correctly afterward.
At the end of these phases, drivers should be as functional as they were before
suspending: I/O can be performed using DMA and IRQs, and the relevant clocks are
@@ -575,10 +579,12 @@ and the phases are similar.
The ``->poweroff``, ``->poweroff_late`` and ``->poweroff_noirq`` callbacks
should do essentially the same things as the ``->suspend``, ``->suspend_late``
-and ``->suspend_noirq`` callbacks, respectively. The only notable difference is
+and ``->suspend_noirq`` callbacks, respectively. A notable difference is
that they need not store the device register values, because the registers
should already have been stored during the ``freeze``, ``freeze_late`` or
-``freeze_noirq`` phases.
+``freeze_noirq`` phases. Also, on many machines the firmware will power-down
+the entire system, so it is not necessary for the callback to put the device in
+a low-power state.
Leaving Hibernation
@@ -764,70 +770,119 @@ device driver in question.
If it is necessary to resume a device from runtime suspend during a system-wide
transition into a sleep state, that can be done by calling
-:c:func:`pm_runtime_resume` for it from the ``->suspend`` callback (or its
-couterpart for transitions related to hibernation) of either the device's driver
-or a subsystem responsible for it (for example, a bus type or a PM domain).
-That is guaranteed to work by the requirement that subsystems must not change
-the state of devices (possibly except for resuming them from runtime suspend)
+:c:func:`pm_runtime_resume` from the ``->suspend`` callback (or the ``->freeze``
+or ``->poweroff`` callback for transitions related to hibernation) of either the
+device's driver or its subsystem (for example, a bus type or a PM domain).
+However, subsystems must not otherwise change the runtime status of devices
from their ``->prepare`` and ``->suspend`` callbacks (or equivalent) *before*
invoking device drivers' ``->suspend`` callbacks (or equivalent).
+.. _smart_suspend_flag:
+
+The ``DPM_FLAG_SMART_SUSPEND`` Driver Flag
+------------------------------------------
+
Some bus types and PM domains have a policy to resume all devices from runtime
suspend upfront in their ``->suspend`` callbacks, but that may not be really
-necessary if the driver of the device can cope with runtime-suspended devices.
-The driver can indicate that by setting ``DPM_FLAG_SMART_SUSPEND`` in
-:c:member:`power.driver_flags` at the probe time, by passing it to the
-:c:func:`dev_pm_set_driver_flags` helper. That also may cause middle-layer code
+necessary if the device's driver can cope with runtime-suspended devices.
+The driver can indicate this by setting ``DPM_FLAG_SMART_SUSPEND`` in
+:c:member:`power.driver_flags` at probe time, with the assistance of the
+:c:func:`dev_pm_set_driver_flags` helper routine.
+
+Setting that flag causes the PM core and middle-layer code
(bus types, PM domains etc.) to skip the ``->suspend_late`` and
``->suspend_noirq`` callbacks provided by the driver if the device remains in
-runtime suspend at the beginning of the ``suspend_late`` phase of system-wide
-suspend (or in the ``poweroff_late`` phase of hibernation), when runtime PM
-has been disabled for it, under the assumption that its state should not change
-after that point until the system-wide transition is over (the PM core itself
-does that for devices whose "noirq", "late" and "early" system-wide PM callbacks
-are executed directly by it). If that happens, the driver's system-wide resume
-callbacks, if present, may still be invoked during the subsequent system-wide
-resume transition and the device's runtime power management status may be set
-to "active" before enabling runtime PM for it, so the driver must be prepared to
-cope with the invocation of its system-wide resume callbacks back-to-back with
-its ``->runtime_suspend`` one (without the intervening ``->runtime_resume`` and
-so on) and the final state of the device must reflect the "active" runtime PM
-status in that case.
+runtime suspend throughout those phases of the system-wide suspend (and
+similarly for the "freeze" and "poweroff" parts of system hibernation).
+[Otherwise the same driver
+callback might be executed twice in a row for the same device, which would not
+be valid in general.] If the middle-layer system-wide PM callbacks are present
+for the device then they are responsible for skipping these driver callbacks;
+if not then the PM core skips them. The subsystem callback routines can
+determine whether they need to skip the driver callbacks by testing the return
+value from the :c:func:`dev_pm_skip_suspend` helper function.
+
+In addition, with ``DPM_FLAG_SMART_SUSPEND`` set, the driver's ``->thaw_noirq``
+and ``->thaw_early`` callbacks are skipped in hibernation if the device remained
+in runtime suspend throughout the preceding "freeze" transition. Again, if the
+middle-layer callbacks are present for the device, they are responsible for
+doing this, otherwise the PM core takes care of it.
+
+
+The ``DPM_FLAG_MAY_SKIP_RESUME`` Driver Flag
+--------------------------------------------
During system-wide resume from a sleep state it's easiest to put devices into
the full-power state, as explained in :file:`Documentation/power/runtime_pm.rst`.
[Refer to that document for more information regarding this particular issue as
well as for information on the device runtime power management framework in
-general.]
-
-However, it often is desirable to leave devices in suspend after system
-transitions to the working state, especially if those devices had been in
+general.] However, it often is desirable to leave devices in suspend after
+system transitions to the working state, especially if those devices had been in
runtime suspend before the preceding system-wide suspend (or analogous)
-transition. Device drivers can use the ``DPM_FLAG_LEAVE_SUSPENDED`` flag to
-indicate to the PM core (and middle-layer code) that they prefer the specific
-devices handled by them to be left suspended and they have no problems with
-skipping their system-wide resume callbacks for this reason. Whether or not the
-devices will actually be left in suspend may depend on their state before the
-given system suspend-resume cycle and on the type of the system transition under
-way. In particular, devices are not left suspended if that transition is a
-restore from hibernation, as device states are not guaranteed to be reflected
-by the information stored in the hibernation image in that case.
-
-The middle-layer code involved in the handling of the device is expected to
-indicate to the PM core if the device may be left in suspend by setting its
-:c:member:`power.may_skip_resume` status bit which is checked by the PM core
-during the "noirq" phase of the preceding system-wide suspend (or analogous)
-transition. The middle layer is then responsible for handling the device as
-appropriate in its "noirq" resume callback, which is executed regardless of
-whether or not the device is left suspended, but the other resume callbacks
-(except for ``->complete``) will be skipped automatically by the PM core if the
-device really can be left in suspend.
-
-For devices whose "noirq", "late" and "early" driver callbacks are invoked
-directly by the PM core, all of the system-wide resume callbacks are skipped if
-``DPM_FLAG_LEAVE_SUSPENDED`` is set and the device is in runtime suspend during
-the ``suspend_noirq`` (or analogous) phase or the transition under way is a
-proper system suspend (rather than anything related to hibernation) and the
-device's wakeup settings are suitable for runtime PM (that is, it cannot
-generate wakeup signals at all or it is allowed to wake up the system from
-sleep).
+transition.
+
+To that end, device drivers can use the ``DPM_FLAG_MAY_SKIP_RESUME`` flag to
+indicate to the PM core and middle-layer code that they allow their "noirq" and
+"early" resume callbacks to be skipped if the device can be left in suspend
+after system-wide PM transitions to the working state. Whether or not that is
+the case generally depends on the state of the device before the given system
+suspend-resume cycle and on the type of the system transition under way.
+In particular, the "thaw" and "restore" transitions related to hibernation are
+not affected by ``DPM_FLAG_MAY_SKIP_RESUME`` at all. [All callbacks are
+issued during the "restore" transition regardless of the flag settings,
+and whether or not any driver callbacks
+are skipped during the "thaw" transition depends whether or not the
+``DPM_FLAG_SMART_SUSPEND`` flag is set (see `above <smart_suspend_flag_>`_).
+In addition, a device is not allowed to remain in runtime suspend if any of its
+children will be returned to full power.]
+
+The ``DPM_FLAG_MAY_SKIP_RESUME`` flag is taken into account in combination with
+the :c:member:`power.may_skip_resume` status bit set by the PM core during the
+"suspend" phase of suspend-type transitions. If the driver or the middle layer
+has a reason to prevent the driver's "noirq" and "early" resume callbacks from
+being skipped during the subsequent system resume transition, it should
+clear :c:member:`power.may_skip_resume` in its ``->suspend``, ``->suspend_late``
+or ``->suspend_noirq`` callback. [Note that the drivers setting
+``DPM_FLAG_SMART_SUSPEND`` need to clear :c:member:`power.may_skip_resume` in
+their ``->suspend`` callback in case the other two are skipped.]
+
+Setting the :c:member:`power.may_skip_resume` status bit along with the
+``DPM_FLAG_MAY_SKIP_RESUME`` flag is necessary, but generally not sufficient,
+for the driver's "noirq" and "early" resume callbacks to be skipped. Whether or
+not they should be skipped can be determined by evaluating the
+:c:func:`dev_pm_skip_resume` helper function.
+
+If that function returns ``true``, the driver's "noirq" and "early" resume
+callbacks should be skipped and the device's runtime PM status will be set to
+"suspended" by the PM core. Otherwise, if the device was runtime-suspended
+during the preceding system-wide suspend transition and its
+``DPM_FLAG_SMART_SUSPEND`` is set, its runtime PM status will be set to
+"active" by the PM core. [Hence, the drivers that do not set
+``DPM_FLAG_SMART_SUSPEND`` should not expect the runtime PM status of their
+devices to be changed from "suspended" to "active" by the PM core during
+system-wide resume-type transitions.]
+
+If the ``DPM_FLAG_MAY_SKIP_RESUME`` flag is not set for a device, but
+``DPM_FLAG_SMART_SUSPEND`` is set and the driver's "late" and "noirq" suspend
+callbacks are skipped, its system-wide "noirq" and "early" resume callbacks, if
+present, are invoked as usual and the device's runtime PM status is set to
+"active" by the PM core before enabling runtime PM for it. In that case, the
+driver must be prepared to cope with the invocation of its system-wide resume
+callbacks back-to-back with its ``->runtime_suspend`` one (without the
+intervening ``->runtime_resume`` and system-wide suspend callbacks) and the
+final state of the device must reflect the "active" runtime PM status in that
+case. [Note that this is not a problem at all if the driver's
+``->suspend_late`` callback pointer points to the same function as its
+``->runtime_suspend`` one and its ``->resume_early`` callback pointer points to
+the same function as the ``->runtime_resume`` one, while none of the other
+system-wide suspend-resume callbacks of the driver are present, for example.]
+
+Likewise, if ``DPM_FLAG_MAY_SKIP_RESUME`` is set for a device, its driver's
+system-wide "noirq" and "early" resume callbacks may be skipped while its "late"
+and "noirq" suspend callbacks may have been executed (in principle, regardless
+of whether or not ``DPM_FLAG_SMART_SUSPEND`` is set). In that case, the driver
+needs to be able to cope with the invocation of its ``->runtime_resume``
+callback back-to-back with its "late" and "noirq" suspend ones. [For instance,
+that is not a concern if the driver sets both ``DPM_FLAG_SMART_SUSPEND`` and
+``DPM_FLAG_MAY_SKIP_RESUME`` and uses the same pair of suspend/resume callback
+functions for runtime PM and system-wide suspend/resume.]
diff --git a/Documentation/power/pci.rst b/Documentation/power/pci.rst
index 0924d29636ad..1831e431f725 100644
--- a/Documentation/power/pci.rst
+++ b/Documentation/power/pci.rst
@@ -1004,41 +1004,39 @@ including the PCI bus type. The flags should be set once at the driver probe
time with the help of the dev_pm_set_driver_flags() function and they should not
be updated directly afterwards.
-The DPM_FLAG_NEVER_SKIP flag prevents the PM core from using the direct-complete
-mechanism allowing device suspend/resume callbacks to be skipped if the device
-is in runtime suspend when the system suspend starts. That also affects all of
-the ancestors of the device, so this flag should only be used if absolutely
-necessary.
-
-The DPM_FLAG_SMART_PREPARE flag instructs the PCI bus type to only return a
-positive value from pci_pm_prepare() if the ->prepare callback provided by the
+The DPM_FLAG_NO_DIRECT_COMPLETE flag prevents the PM core from using the
+direct-complete mechanism allowing device suspend/resume callbacks to be skipped
+if the device is in runtime suspend when the system suspend starts. That also
+affects all of the ancestors of the device, so this flag should only be used if
+absolutely necessary.
+
+The DPM_FLAG_SMART_PREPARE flag causes the PCI bus type to return a positive
+value from pci_pm_prepare() only if the ->prepare callback provided by the
driver of the device returns a positive value. That allows the driver to opt
-out from using the direct-complete mechanism dynamically.
+out from using the direct-complete mechanism dynamically (whereas setting
+DPM_FLAG_NO_DIRECT_COMPLETE means permanent opt-out).
The DPM_FLAG_SMART_SUSPEND flag tells the PCI bus type that from the driver's
perspective the device can be safely left in runtime suspend during system
suspend. That causes pci_pm_suspend(), pci_pm_freeze() and pci_pm_poweroff()
-to skip resuming the device from runtime suspend unless there are PCI-specific
-reasons for doing that. Also, it causes pci_pm_suspend_late/noirq(),
-pci_pm_freeze_late/noirq() and pci_pm_poweroff_late/noirq() to return early
-if the device remains in runtime suspend in the beginning of the "late" phase
-of the system-wide transition under way. Moreover, if the device is in
-runtime suspend in pci_pm_resume_noirq() or pci_pm_restore_noirq(), its runtime
-power management status will be changed to "active" (as it is going to be put
-into D0 going forward), but if it is in runtime suspend in pci_pm_thaw_noirq(),
-the function will set the power.direct_complete flag for it (to make the PM core
-skip the subsequent "thaw" callbacks for it) and return.
-
-Setting the DPM_FLAG_LEAVE_SUSPENDED flag means that the driver prefers the
-device to be left in suspend after system-wide transitions to the working state.
-This flag is checked by the PM core, but the PCI bus type informs the PM core
-which devices may be left in suspend from its perspective (that happens during
-the "noirq" phase of system-wide suspend and analogous transitions) and next it
-uses the dev_pm_may_skip_resume() helper to decide whether or not to return from
-pci_pm_resume_noirq() early, as the PM core will skip the remaining resume
-callbacks for the device during the transition under way and will set its
-runtime PM status to "suspended" if dev_pm_may_skip_resume() returns "true" for
-it.
+to avoid resuming the device from runtime suspend unless there are PCI-specific
+reasons for doing that. Also, it causes pci_pm_suspend_late/noirq() and
+pci_pm_poweroff_late/noirq() to return early if the device remains in runtime
+suspend during the "late" phase of the system-wide transition under way.
+Moreover, if the device is in runtime suspend in pci_pm_resume_noirq() or
+pci_pm_restore_noirq(), its runtime PM status will be changed to "active" (as it
+is going to be put into D0 going forward).
+
+Setting the DPM_FLAG_MAY_SKIP_RESUME flag means that the driver allows its
+"noirq" and "early" resume callbacks to be skipped if the device can be left
+in suspend after a system-wide transition into the working state. This flag is
+taken into consideration by the PM core along with the power.may_skip_resume
+status bit of the device which is set by pci_pm_suspend_noirq() in certain
+situations. If the PM core determines that the driver's "noirq" and "early"
+resume callbacks should be skipped, the dev_pm_skip_resume() helper function
+will return "true" and that will cause pci_pm_resume_noirq() and
+pci_pm_resume_early() to return upfront without touching the device and
+executing the driver callbacks.
3.2. Device Runtime Power Management
------------------------------------