summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-11-06 22:50:24 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2015-11-06 22:50:24 +0300
commit02f0d3f758ab456c50199b723a53f2443fa4f684 (patch)
tree3898e06a10512a1f6aed5c997b671d8c796cc9e2 /Documentation
parent2d49dcb9e48f65a69281fe4c698c8f1a20215daf (diff)
parentf8479dd6a03cfdc3b14e742045bfd8748cd86bd7 (diff)
downloadlinux-02f0d3f758ab456c50199b723a53f2443fa4f684.tar.xz
Merge tag 'for-linus-20151106' of git://git.infradead.org/linux-mtd
Pull MTD updates from Brian Norris: "Core: - WARN (in some cases) when a struct mtd_info is registered multiple times; in the past this was "supported", but it's still error prone for future development. There's only one ugly case of this left in the tree (that we're aware of) and the owners are aware of the problems there. - fix potential deadlock in the blkdev removal path NOTE: the (potential) deadlock was introduced in a for-stable patch. This one is also marked for -stable. - ioctl(BLKPG) compat_ioctl support; resolves issues with 32-bit user space vs 64-bit kernel space - Set MTD parent device correctly throughout the tree, so the tree structure appears correctly in sysfs; many drivers were missing this (soft) requirement - Move device tree partitions (ofpart) into a dedicated 'partitions' subnode; this helps to disambiguate whether a node is a partition or some other auxiliary data - Improve error handling for partitioning failures NAND: - General: Increase timeout period, for corner-case systems with less-than-accurate jiffies - Fix OF-based autoloading of several NAND drivers when built as modules - pxa3xx_nand: - Rework timing configuration to be more dynamic - Refactor PM support - brcmnand: prepare for NorthStar 2 support (ARM64, 16-bit NAND chips) - sunxi_nand: refactoring and a few bug fixes - vf610: new NAND driver - FSMC: add SW BCH support; support common NAND DT bindings - lpc32xx_slc: refactor and improve timing calculations logic - denali: support for rev 5.1 SPI NOR: - Layering improvements - Added Winbond lock/unlock support - Added mtd_is_locked() (i.e., ioctl(MEMISLOCKED)) support - Increase full-chip-erase timeout linearly with flash size - fsl-quadspi: fix compile for non-ARM architectures - New flash support" * tag 'for-linus-20151106' of git://git.infradead.org/linux-mtd: (169 commits) mtd: don't WARN about overloaded users of mtd->reboot_notifier.notifier_call mtd: nand: sunxi: avoid retrieving data before ECC pass mtd: nand: sunxi: fix sunxi_nfc_hw_ecc_read/write_chunk() mtd: blkdevs: fix potential deadlock + lockdep warnings mtd: ofpart: move ofpart partitions to a dedicated dt node doc: dt: mtd: support partitions in a special 'partitions' subnode mtd: brcmnand: Force 8bit mode before doing nand_scan_ident() mtd: brcmnand: factor out CFG and CFG_EXT bitfields mtd: mtdpart: Do not fail mtd probe when parsing partitions fails mtd: fsl-quadspi: fix macro collision problems with READ/WRITE mtd: warn when registering the same master many times mtd: fixup corner case error handling in mtd_device_parse_register() mtd: tests: Replace timeval with ktime_t mtd: fsmc_nand: Add BCH4 SW ECC support for SPEAr600 mtd: nand: vf610_nfc: use nand_check_erased_ecc_chunk() helper mtd: nand: increase ready wait timeout and report timeouts mtd: docg3: off by one in doc_register_sysfs() mtd: pxa3xx_nand: clean up the pxa3xx timings mtd: pxa3xx_nand: rework flash detection and timing setup mtd: pxa3xx_nand: add helpers to setup the timings ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/mtd/fsmc-nand.txt6
-rw-r--r--Documentation/devicetree/bindings/mtd/partition.txt71
-rw-r--r--Documentation/devicetree/bindings/mtd/vf610-nfc.txt59
3 files changed, 107 insertions, 29 deletions
diff --git a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
index 5235cbc551b0..32636eb77304 100644
--- a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
@@ -30,6 +30,12 @@ Optional properties:
command is asserted. Zero means one cycle, 255 means 256
cycles.
- bank: default NAND bank to use (0-3 are valid, 0 is the default).
+- nand-ecc-mode : see nand.txt
+- nand-ecc-strength : see nand.txt
+- nand-ecc-step-size : see nand.txt
+
+Can support 1-bit HW ECC (default) or if stronger correction is required,
+software-based BCH.
Example:
diff --git a/Documentation/devicetree/bindings/mtd/partition.txt b/Documentation/devicetree/bindings/mtd/partition.txt
index 8e5557da1955..f1e2a02381a4 100644
--- a/Documentation/devicetree/bindings/mtd/partition.txt
+++ b/Documentation/devicetree/bindings/mtd/partition.txt
@@ -4,10 +4,17 @@ Partitions can be represented by sub-nodes of an mtd device. This can be used
on platforms which have strong conventions about which portions of a flash are
used for what purposes, but which don't use an on-flash partition table such
as RedBoot.
-NOTE: if the sub-node has a compatible string, then it is not a partition.
-#address-cells & #size-cells must both be present in the mtd device. There are
-two valid values for both:
+The partition table should be a subnode of the mtd node and should be named
+'partitions'. Partitions are defined in subnodes of the partitions node.
+
+For backwards compatibility partitions as direct subnodes of the mtd device are
+supported. This use is discouraged.
+NOTE: also for backwards compatibility, direct subnodes that have a compatible
+string are not considered partitions, as they may be used for other bindings.
+
+#address-cells & #size-cells must both be present in the partitions subnode of the
+mtd device. There are two valid values for both:
<1>: for partitions that require a single 32-bit cell to represent their
size/address (aka the value is below 4 GiB)
<2>: for partitions that require two 32-bit cells to represent their
@@ -28,44 +35,50 @@ Examples:
flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
+ partitions {
+ #address-cells = <1>;
+ #size-cells = <1>;
- partition@0 {
- label = "u-boot";
- reg = <0x0000000 0x100000>;
- read-only;
- };
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x100000>;
+ read-only;
+ };
- uimage@100000 {
- reg = <0x0100000 0x200000>;
+ uimage@100000 {
+ reg = <0x0100000 0x200000>;
+ };
};
};
flash@1 {
- #address-cells = <1>;
- #size-cells = <2>;
+ partitions {
+ #address-cells = <1>;
+ #size-cells = <2>;
- /* a 4 GiB partition */
- partition@0 {
- label = "filesystem";
- reg = <0x00000000 0x1 0x00000000>;
+ /* a 4 GiB partition */
+ partition@0 {
+ label = "filesystem";
+ reg = <0x00000000 0x1 0x00000000>;
+ };
};
};
flash@2 {
- #address-cells = <2>;
- #size-cells = <2>;
+ partitions {
+ #address-cells = <2>;
+ #size-cells = <2>;
- /* an 8 GiB partition */
- partition@0 {
- label = "filesystem #1";
- reg = <0x0 0x00000000 0x2 0x00000000>;
- };
+ /* an 8 GiB partition */
+ partition@0 {
+ label = "filesystem #1";
+ reg = <0x0 0x00000000 0x2 0x00000000>;
+ };
- /* a 4 GiB partition */
- partition@200000000 {
- label = "filesystem #2";
- reg = <0x2 0x00000000 0x1 0x00000000>;
+ /* a 4 GiB partition */
+ partition@200000000 {
+ label = "filesystem #2";
+ reg = <0x2 0x00000000 0x1 0x00000000>;
+ };
};
};
diff --git a/Documentation/devicetree/bindings/mtd/vf610-nfc.txt b/Documentation/devicetree/bindings/mtd/vf610-nfc.txt
new file mode 100644
index 000000000000..c96eeb65f450
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/vf610-nfc.txt
@@ -0,0 +1,59 @@
+Freescale's NAND flash controller (NFC)
+
+This variant of the Freescale NAND flash controller (NFC) can be found on
+Vybrid (vf610), MPC5125, MCF54418 and Kinetis K70.
+
+Required properties:
+- compatible: Should be set to "fsl,vf610-nfc".
+- reg: address range of the NFC.
+- interrupts: interrupt of the NFC.
+- #address-cells: shall be set to 1. Encode the nand CS.
+- #size-cells : shall be set to 0.
+- assigned-clocks: main clock from the SoC, for Vybrid <&clks VF610_CLK_NFC>;
+- assigned-clock-rates: The NAND bus timing is derived from this clock
+ rate and should not exceed maximum timing for any NAND memory chip
+ in a board stuffing. Typical NAND memory timings derived from this
+ clock are found in the SoC hardware reference manual. Furthermore,
+ there might be restrictions on maximum rates when using hardware ECC.
+
+- #address-cells, #size-cells : Must be present if the device has sub-nodes
+ representing partitions.
+
+Required children nodes:
+Children nodes represent the available nand chips. Currently the driver can
+only handle one NAND chip.
+
+Required properties:
+- compatible: Should be set to "fsl,vf610-nfc-cs".
+- nand-bus-width: see nand.txt
+- nand-ecc-mode: see nand.txt
+
+Required properties for hardware ECC:
+- nand-ecc-strength: supported strengths are 24 and 32 bit (see nand.txt)
+- nand-ecc-step-size: step size equals page size, currently only 2k pages are
+ supported
+- nand-on-flash-bbt: see nand.txt
+
+Example:
+
+ nfc: nand@400e0000 {
+ compatible = "fsl,vf610-nfc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x400e0000 0x4000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_NFC>;
+ clock-names = "nfc";
+ assigned-clocks = <&clks VF610_CLK_NFC>;
+ assigned-clock-rates = <33000000>;
+
+ nand@0 {
+ compatible = "fsl,vf610-nfc-nandcs";
+ reg = <0>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <32>;
+ nand-ecc-step-size = <2048>;
+ nand-on-flash-bbt;
+ };
+ };