diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2021-08-30 21:41:46 +0300 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2021-08-30 21:41:46 +0300 |
commit | 0da9bc6d2fc3f98095d69f34c17f7d5730bbcc6c (patch) | |
tree | b0036377a4375b0c3b1b564ba36b7190018aec2a /Documentation | |
parent | d46e0d335497d89e36a8dab3ce5b605d7088c67a (diff) | |
parent | 6e9c846aa0c53673c5d53925a6122aa0e53a9795 (diff) | |
download | linux-0da9bc6d2fc3f98095d69f34c17f7d5730bbcc6c.tar.xz |
Merge tag 'spi-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"A quiet release for SPI, some fixes and a couple of new drivers plus
one small refactoring:
- Move the chip select timing configuration from the controller to
the device to allow a bit more flexibility
- New drivers for Rockchip SFC and Spreadtrum ADI"
* tag 'spi-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (47 commits)
spi: spi-zynq-qspi: use wait_for_completion_timeout to make zynq_qspi_exec_mem_op not interruptible
spi: add sprd ADI for sc9863 and ums512
spi: Convert sprd ADI bindings to yaml
spi: sprd: Add ADI r3 support
spi: sprd: Fix the wrong WDG_LOAD_VAL
spi: davinci: invoke chipselect callback
spi: sprd: fill offset only to RD_CMD register for reading from slave device
spi: sprd: Make sure offset not equal to slave address size
spi: sprd: Pass offset instead of physical address to adi_read/_write()
spi: rockchip-sfc: Fix assigned but never used return error codes
spi: rockchip-sfc: Remove redundant IO operations
spi: stm32: fix excluded_middle.cocci warnings
spi: coldfire-qspi: Use clk_disable_unprepare in the remove function
spi: tegra20-slink: remove spi_master_put() in tegra_slink_remove()
spi: rockchip-sfc: add rockchip serial flash controller
spi: rockchip-sfc: Bindings for Rockchip serial flash controller
spi: orion: Prevent incorrect chip select behaviour
spi: mxic: add missing braces
spi: spi-pic32: Fix issue with uninitialized dma_slave_config
spi: spi-fsl-dspi: Fix issue with uninitialized dma_slave_config
...
Diffstat (limited to 'Documentation')
7 files changed, 313 insertions, 112 deletions
diff --git a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml index e425278653f5..e2ca0b000471 100644 --- a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml +++ b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml @@ -19,7 +19,6 @@ properties: compatible: enum: - ibm,fsi2spi - - ibm,fsi2spi-restricted reg: items: diff --git a/Documentation/devicetree/bindings/spi/omap-spi.txt b/Documentation/devicetree/bindings/spi/omap-spi.txt deleted file mode 100644 index 487208c256c0..000000000000 --- a/Documentation/devicetree/bindings/spi/omap-spi.txt +++ /dev/null @@ -1,48 +0,0 @@ -OMAP2+ McSPI device - -Required properties: -- compatible : - - "ti,am654-mcspi" for AM654. - - "ti,omap2-mcspi" for OMAP2 & OMAP3. - - "ti,omap4-mcspi" for OMAP4+. -- ti,spi-num-cs : Number of chipselect supported by the instance. -- ti,hwmods: Name of the hwmod associated to the McSPI -- ti,pindir-d0-out-d1-in: Select the D0 pin as output and D1 as - input. The default is D0 as input and - D1 as output. - -Optional properties: -- dmas: List of DMA specifiers with the controller specific format - as described in the generic DMA client binding. A tx and rx - specifier is required for each chip select. -- dma-names: List of DMA request names. These strings correspond - 1:1 with the DMA specifiers listed in dmas. The string naming - is to be "rxN" and "txN" for RX and TX requests, - respectively, where N equals the chip select number. - -Examples: - -[hwmod populated DMA resources] - -mcspi1: mcspi@1 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "ti,omap4-mcspi"; - ti,hwmods = "mcspi1"; - ti,spi-num-cs = <4>; -}; - -[generic DMA request binding] - -mcspi1: mcspi@1 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "ti,omap4-mcspi"; - ti,hwmods = "mcspi1"; - ti,spi-num-cs = <2>; - dmas = <&edma 42 - &edma 43 - &edma 44 - &edma 45>; - dma-names = "tx0", "rx0", "tx1", "rx1"; -}; diff --git a/Documentation/devicetree/bindings/spi/omap-spi.yaml b/Documentation/devicetree/bindings/spi/omap-spi.yaml new file mode 100644 index 000000000000..e55538186cf6 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/omap-spi.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/omap-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SPI controller bindings for OMAP and K3 SoCs + +maintainers: + - Aswath Govindraju <a-govindraju@ti.com> + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - ti,am654-mcspi + - ti,am4372-mcspi + - const: ti,omap4-mcspi + - items: + - enum: + - ti,omap2-mcspi + - ti,omap4-mcspi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + ti,spi-num-cs: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Number of chipselect supported by the instance. + minimum: 1 + maximum: 4 + + ti,hwmods: + $ref: /schemas/types.yaml#/definitions/string + description: + Must be "mcspi<n>", n being the instance number (1-based). + This property is applicable only on legacy platforms mainly omap2/3 + and ti81xx and should not be used on other platforms. + deprecated: true + + ti,pindir-d0-out-d1-in: + description: + Select the D0 pin as output and D1 as input. The default is D0 + as input and D1 as output. + type: boolean + + dmas: + description: + List of DMA specifiers with the controller specific format as + described in the generic DMA client binding. A tx and rx + specifier is required for each chip select. + minItems: 1 + maxItems: 8 + + dma-names: + description: + List of DMA request names. These strings correspond 1:1 with + the DMA sepecifiers listed in dmas. The string names is to be + "rxN" and "txN" for RX and TX requests, respectively. Where N + is the chip select number. + minItems: 1 + maxItems: 8 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +if: + properties: + compatible: + oneOf: + - const: ti,omap2-mcspi + - const: ti,omap4-mcspi + +then: + properties: + ti,hwmods: + items: + - pattern: "^mcspi([1-9])$" + +else: + properties: + ti,hwmods: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + spi@2100000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x2100000 0x400>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 137 1>; + power-domains = <&k3_pds 137 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>; + dma-names = "tx0", "rx0"; + }; diff --git a/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml b/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml new file mode 100644 index 000000000000..339fb39529f3 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/rockchip-sfc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip Serial Flash Controller (SFC) + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + - Chris Morgan <macromorgan@hotmail.com> + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + const: rockchip,sfc + description: + The rockchip sfc controller is a standalone IP with version register, + and the driver can handle all the feature difference inside the IP + depending on the version register. + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + + clock-names: + items: + - const: clk_sfc + - const: hclk_sfc + + power-domains: + maxItems: 1 + + rockchip,sfc-no-dma: + description: Disable DMA and utilize FIFO mode only + type: boolean + +patternProperties: + "^flash@[0-3]$": + type: object + properties: + reg: + minimum: 0 + maximum: 3 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/px30-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/px30-power.h> + + sfc: spi@ff3a0000 { + compatible = "rockchip,sfc"; + reg = <0xff3a0000 0x4000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>; + clock-names = "clk_sfc", "hclk_sfc"; + pinctrl-0 = <&sfc_clk &sfc_cs &sfc_bus2>; + pinctrl-names = "default"; + power-domains = <&power PX30_PD_MMC_NAND>; + #address-cells = <1>; + #size-cells = <0>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <108000000>; + spi-rx-bus-width = <2>; + spi-tx-bus-width = <2>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt index 4d0e4c15c4ea..2a24969159cc 100644 --- a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt +++ b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt @@ -11,6 +11,7 @@ Required properties: - mediatek,mt8135-spi: for mt8135 platforms - mediatek,mt8173-spi: for mt8173 platforms - mediatek,mt8183-spi: for mt8183 platforms + - mediatek,mt6893-spi: for mt6893 platforms - "mediatek,mt8192-spi", "mediatek,mt6765-spi": for mt8192 platforms - "mediatek,mt8195-spi", "mediatek,mt6765-spi": for mt8195 platforms - "mediatek,mt8516-spi", "mediatek,mt2712-spi": for mt8516 platforms diff --git a/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt b/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt deleted file mode 100644 index 2567c829e2dc..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt +++ /dev/null @@ -1,63 +0,0 @@ -Spreadtrum ADI controller - -ADI is the abbreviation of Anolog-Digital interface, which is used to access -analog chip (such as PMIC) from digital chip. ADI controller follows the SPI -framework for its hardware implementation is alike to SPI bus and its timing -is compatile to SPI timing. - -ADI controller has 50 channels including 2 software read/write channels and -48 hardware channels to access analog chip. For 2 software read/write channels, -users should set ADI registers to access analog chip. For hardware channels, -we can configure them to allow other hardware components to use it independently, -which means we can just link one analog chip address to one hardware channel, -then users can access the mapped analog chip address by this hardware channel -triggered by hardware components instead of ADI software channels. - -Thus we introduce one property named "sprd,hw-channels" to configure hardware -channels, the first value specifies the hardware channel id which is used to -transfer data triggered by hardware automatically, and the second value specifies -the analog chip address where user want to access by hardware components. - -Since we have multi-subsystems will use unique ADI to access analog chip, when -one system is reading/writing data by ADI software channels, that should be under -one hardware spinlock protection to prevent other systems from reading/writing -data by ADI software channels at the same time, or two parallel routine of setting -ADI registers will make ADI controller registers chaos to lead incorrect results. -Then we need one hardware spinlock to synchronize between the multiple subsystems. - -The new version ADI controller supplies multiple master channels for different -subsystem accessing, that means no need to add hardware spinlock to synchronize, -thus change the hardware spinlock support to be optional to keep backward -compatibility. - -Required properties: -- compatible: Should be "sprd,sc9860-adi". -- reg: Offset and length of ADI-SPI controller register space. -- #address-cells: Number of cells required to define a chip select address - on the ADI-SPI bus. Should be set to 1. -- #size-cells: Size of cells required to define a chip select address size - on the ADI-SPI bus. Should be set to 0. - -Optional properties: -- hwlocks: Reference to a phandle of a hwlock provider node. -- hwlock-names: Reference to hwlock name strings defined in the same order - as the hwlocks, should be "adi". -- sprd,hw-channels: This is an array of channel values up to 49 channels. - The first value specifies the hardware channel id which is used to - transfer data triggered by hardware automatically, and the second - value specifies the analog chip address where user want to access - by hardware components. - -SPI slave nodes must be children of the SPI controller node and can contain -properties described in Documentation/devicetree/bindings/spi/spi-bus.txt. - -Example: - adi_bus: spi@40030000 { - compatible = "sprd,sc9860-adi"; - reg = <0 0x40030000 0 0x10000>; - hwlocks = <&hwlock1 0>; - hwlock-names = "adi"; - #address-cells = <1>; - #size-cells = <0>; - sprd,hw-channels = <30 0x8c20>; - }; diff --git a/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml b/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml new file mode 100644 index 000000000000..fe014020da69 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/spi/sprd,spi-adi.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Spreadtrum ADI controller + +maintainers: + - Orson Zhai <orsonzhai@gmail.com> + - Baolin Wang <baolin.wang7@gmail.com> + - Chunyan Zhang <zhang.lyra@gmail.com> + +description: | + ADI is the abbreviation of Anolog-Digital interface, which is used to access + analog chip (such as PMIC) from digital chip. ADI controller follows the SPI + framework for its hardware implementation is alike to SPI bus and its timing + is compatile to SPI timing. + + ADI controller has 50 channels including 2 software read/write channels and + 48 hardware channels to access analog chip. For 2 software read/write channels, + users should set ADI registers to access analog chip. For hardware channels, + we can configure them to allow other hardware components to use it independently, + which means we can just link one analog chip address to one hardware channel, + then users can access the mapped analog chip address by this hardware channel + triggered by hardware components instead of ADI software channels. + + Thus we introduce one property named "sprd,hw-channels" to configure hardware + channels, the first value specifies the hardware channel id which is used to + transfer data triggered by hardware automatically, and the second value specifies + the analog chip address where user want to access by hardware components. + + Since we have multi-subsystems will use unique ADI to access analog chip, when + one system is reading/writing data by ADI software channels, that should be under + one hardware spinlock protection to prevent other systems from reading/writing + data by ADI software channels at the same time, or two parallel routine of setting + ADI registers will make ADI controller registers chaos to lead incorrect results. + Then we need one hardware spinlock to synchronize between the multiple subsystems. + + The new version ADI controller supplies multiple master channels for different + subsystem accessing, that means no need to add hardware spinlock to synchronize, + thus change the hardware spinlock support to be optional to keep backward + compatibility. + +allOf: + - $ref: /spi/spi-controller.yaml# + +properties: + compatible: + enum: + - sprd,sc9860-adi + - sprd,sc9863-adi + - sprd,ums512-adi + + reg: + maxItems: 1 + + hwlocks: + maxItems: 1 + + hwlock-names: + const: adi + + sprd,hw-channels: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: A list of hardware channels + minItems: 1 + maxItems: 48 + items: + items: + - description: The hardware channel id which is used to transfer data + triggered by hardware automatically, channel id 0-1 are for software + use, 2-49 are hardware channels. + minimum: 2 + maximum: 49 + - description: The analog chip address where user want to access by + hardware components. + +required: + - compatible + - reg + - '#address-cells' + - '#size-cells' + +unevaluatedProperties: false + +examples: + - | + aon { + #address-cells = <2>; + #size-cells = <2>; + + adi_bus: spi@40030000 { + compatible = "sprd,sc9860-adi"; + reg = <0 0x40030000 0 0x10000>; + hwlocks = <&hwlock1 0>; + hwlock-names = "adi"; + #address-cells = <1>; + #size-cells = <0>; + sprd,hw-channels = <30 0x8c20>; + }; + }; +... |