summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-02-11 19:45:40 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2015-02-11 19:45:40 +0300
commit3e63430a5cc26bc90a6e33ab33f901196b7b63ac (patch)
treebdc92e6cbaccc26f88d4c71fddbe54a86e5e707d /Documentation
parent6fc26fc5783add961533c819995bd97db05990f0 (diff)
parent4bad5d2d25099a42e146d7b18d2b98950ed287f5 (diff)
downloadlinux-3e63430a5cc26bc90a6e33ab33f901196b7b63ac.tar.xz
Merge tag 'media/v3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab: - Some documentation updates and a few new pixel formats - Stop btcx-risc abuse by cx88 and move it to bt8xx driver - New platform driver: am437x - New webcam driver: toptek - New remote controller hardware protocols added to img-ir driver - Removal of a few very old drivers that relies on old kABIs and are for very hard to find hardware: parallel port webcam drivers (bw-qcam, c-cam, pms and w9966), tlg2300, Video In/Out for SGI (vino) - Removal of the USB Telegent driver (tlg2300). The company that developed this driver has long gone and the hardware is hard to find. As it relies on a legacy set of kABI symbols and nobody seems to care about it, remove it. - several improvements at rtl2832 driver - conversion on cx28521 and au0828 to use videobuf2 (VB2) - several improvements, fixups and board additions * tag 'media/v3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (321 commits) [media] dvb_net: Convert local hex dump to print_hex_dump_debug [media] dvb_net: Use standard debugging facilities [media] dvb_net: Use vsprintf %pM extension to print Ethernet addresses [media] staging: lirc_serial: adjust boolean assignments [media] stb0899: use sign_extend32() for sign extension [media] si2168: add support for 1.7MHz bandwidth [media] si2168: return error if set_frontend is called with invalid parameters [media] lirc_dev: avoid potential null-dereference [media] mn88472: simplify bandwidth registers setting code [media] dvb: tc90522: re-add symbol-rate report [media] lmedm04: add read snr, signal strength and ber call backs [media] lmedm04: Create frontend call back for read status [media] lmedm04: create frontend callbacks for signal/snr/ber/ucblocks [media] lmedm04: Fix usb_submit_urb BOGUS urb xfer, pipe 1 != type 3 in interrupt urb [media] lmedm04: Increase Interupt due time to 200 msec [media] cx88-dvb: whitespace cleanup [media] rtl28xxu: properly initialize pdata [media] rtl2832: declare functions as static [media] rtl2830: declare functions as static [media] rtl2832_sdr: add kernel-doc comments for platform_data ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/DocBook/media/v4l/controls.xml11
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-srggb10.xml2
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-srggb10alaw8.xml2
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml2
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-srggb10p.xml99
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-srggb12.xml2
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt.xml1
-rw-r--r--Documentation/DocBook/media/v4l/vidioc-dv-timings-cap.xml8
-rw-r--r--Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml8
-rw-r--r--Documentation/devicetree/bindings/media/i2c/nokia,smia.txt63
-rw-r--r--Documentation/devicetree/bindings/media/sunxi-ir.txt4
-rw-r--r--Documentation/devicetree/bindings/media/ti-am437x-vpfe.txt61
-rw-r--r--Documentation/devicetree/bindings/media/video-interfaces.txt3
-rw-r--r--Documentation/video4linux/CQcam.txt205
-rw-r--r--Documentation/video4linux/README.tlg230047
-rw-r--r--Documentation/video4linux/v4l2-framework.txt25
-rw-r--r--Documentation/video4linux/w9966.txt33
17 files changed, 262 insertions, 314 deletions
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index e013e4bf244c..4e9462f1ab4c 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -2692,12 +2692,11 @@ in the S5P family of SoCs by Samsung.
<row><entry></entry></row>
<row>
<entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE</constant>&nbsp;</entry>
- <entry>integer</entry>
- </row><row><entry spanname="descr">If the display delay is enabled then the decoder has to return a
-CAPTURE buffer after processing a certain number of OUTPUT buffers. If this number is low, then it may result in
-buffers not being dequeued in display order. In addition hardware may still use those buffers as reference, thus
-application should not write to those buffers. This feature can be used for example for generating thumbnails of videos.
-Applicable to the H264 decoder.
+ <entry>boolean</entry>
+ </row><row><entry spanname="descr">If the display delay is enabled then the decoder is forced to return a
+CAPTURE buffer (decoded frame) after processing a certain number of OUTPUT buffers. The delay can be set through
+<constant>V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY</constant>. This feature can be used for example
+for generating thumbnails of videos. Applicable to the H264 decoder.
</entry>
</row>
<row><entry></entry></row>
diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml
index c1c62a9acc2a..f34d03ebda3a 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml
@@ -17,7 +17,7 @@
<refsect1>
<title>Description</title>
- <para>The following four pixel formats are raw sRGB / Bayer formats with
+ <para>These four pixel formats are raw sRGB / Bayer formats with
10 bits per colour. Each colour component is stored in a 16-bit word, with 6
unused high bits filled with zeros. Each n-pixel row contains n/2 green samples
and n/2 blue or red samples, with alternating red and blue rows. Bytes are
diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb10alaw8.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb10alaw8.xml
index 29acc2098cc2..d2e5845e57fb 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-srggb10alaw8.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10alaw8.xml
@@ -25,7 +25,7 @@
</refnamediv>
<refsect1>
<title>Description</title>
- <para>The following four pixel formats are raw sRGB / Bayer
+ <para>These four pixel formats are raw sRGB / Bayer
formats with 10 bits per color compressed to 8 bits each,
using the A-LAW algorithm. Each color component consumes 8
bits of memory. In other respects this format is similar to
diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml
index 2d3f0b1aefe0..bde89878c5c5 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml
@@ -18,7 +18,7 @@
<refsect1>
<title>Description</title>
- <para>The following four pixel formats are raw sRGB / Bayer formats
+ <para>These four pixel formats are raw sRGB / Bayer formats
with 10 bits per colour compressed to 8 bits each, using DPCM
compression. DPCM, differential pulse-code modulation, is lossy.
Each colour component consumes 8 bits of memory. In other respects
diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb10p.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb10p.xml
new file mode 100644
index 000000000000..30aa63581fe3
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10p.xml
@@ -0,0 +1,99 @@
+ <refentry id="pixfmt-srggb10p">
+ <refmeta>
+ <refentrytitle>V4L2_PIX_FMT_SRGGB10P ('pRAA'),
+ V4L2_PIX_FMT_SGRBG10P ('pgAA'),
+ V4L2_PIX_FMT_SGBRG10P ('pGAA'),
+ V4L2_PIX_FMT_SBGGR10P ('pBAA'),
+ </refentrytitle>
+ &manvol;
+ </refmeta>
+ <refnamediv>
+ <refname id="V4L2-PIX-FMT-SRGGB10P"><constant>V4L2_PIX_FMT_SRGGB10P</constant></refname>
+ <refname id="V4L2-PIX-FMT-SGRBG10P"><constant>V4L2_PIX_FMT_SGRBG10P</constant></refname>
+ <refname id="V4L2-PIX-FMT-SGBRG10P"><constant>V4L2_PIX_FMT_SGBRG10P</constant></refname>
+ <refname id="V4L2-PIX-FMT-SBGGR10P"><constant>V4L2_PIX_FMT_SBGGR10P</constant></refname>
+ <refpurpose>10-bit packed Bayer formats</refpurpose>
+ </refnamediv>
+ <refsect1>
+ <title>Description</title>
+
+ <para>These four pixel formats are packed raw sRGB /
+ Bayer formats with 10 bits per colour. Every four consecutive
+ colour components are packed into 5 bytes. Each of the first 4
+ bytes contain the 8 high order bits of the pixels, and the
+ fifth byte contains the two least significants bits of each
+ pixel, in the same order.</para>
+
+ <para>Each n-pixel row contains n/2 green samples and n/2 blue
+ or red samples, with alternating green-red and green-blue
+ rows. They are conventionally described as GRGR... BGBG...,
+ RGRG... GBGB..., etc. Below is an example of one of these
+ formats:</para>
+
+ <example>
+ <title><constant>V4L2_PIX_FMT_SBGGR10P</constant> 4 &times; 4
+ pixel image</title>
+
+ <formalpara>
+ <title>Byte Order.</title>
+ <para>Each cell is one byte.
+ <informaltable frame="topbot" colsep="1" rowsep="1">
+ <tgroup cols="5" align="center" border="1">
+ <colspec align="left" colwidth="2*" />
+ <tbody valign="top">
+ <row>
+ <entry>start&nbsp;+&nbsp;0:</entry>
+ <entry>B<subscript>00high</subscript></entry>
+ <entry>G<subscript>01high</subscript></entry>
+ <entry>B<subscript>02high</subscript></entry>
+ <entry>G<subscript>03high</subscript></entry>
+ <entry>B<subscript>00low</subscript>(bits 7--6)
+ G<subscript>01low</subscript>(bits 5--4)
+ B<subscript>02low</subscript>(bits 3--2)
+ G<subscript>03low</subscript>(bits 1--0)
+ </entry>
+ </row>
+ <row>
+ <entry>start&nbsp;+&nbsp;5:</entry>
+ <entry>G<subscript>10high</subscript></entry>
+ <entry>R<subscript>11high</subscript></entry>
+ <entry>G<subscript>12high</subscript></entry>
+ <entry>R<subscript>13high</subscript></entry>
+ <entry>G<subscript>10low</subscript>(bits 7--6)
+ R<subscript>11low</subscript>(bits 5--4)
+ G<subscript>12low</subscript>(bits 3--2)
+ R<subscript>13low</subscript>(bits 1--0)
+ </entry>
+ </row>
+ <row>
+ <entry>start&nbsp;+&nbsp;10:</entry>
+ <entry>B<subscript>20high</subscript></entry>
+ <entry>G<subscript>21high</subscript></entry>
+ <entry>B<subscript>22high</subscript></entry>
+ <entry>G<subscript>23high</subscript></entry>
+ <entry>B<subscript>20low</subscript>(bits 7--6)
+ G<subscript>21low</subscript>(bits 5--4)
+ B<subscript>22low</subscript>(bits 3--2)
+ G<subscript>23low</subscript>(bits 1--0)
+ </entry>
+ </row>
+ <row>
+ <entry>start&nbsp;+&nbsp;15:</entry>
+ <entry>G<subscript>30high</subscript></entry>
+ <entry>R<subscript>31high</subscript></entry>
+ <entry>G<subscript>32high</subscript></entry>
+ <entry>R<subscript>33high</subscript></entry>
+ <entry>G<subscript>30low</subscript>(bits 7--6)
+ R<subscript>31low</subscript>(bits 5--4)
+ G<subscript>32low</subscript>(bits 3--2)
+ R<subscript>33low</subscript>(bits 1--0)
+ </entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </informaltable>
+ </para>
+ </formalpara>
+ </example>
+ </refsect1>
+</refentry>
diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb12.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb12.xml
index 96947f17fca1..0c8e4adf417f 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-srggb12.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-srggb12.xml
@@ -17,7 +17,7 @@
<refsect1>
<title>Description</title>
- <para>The following four pixel formats are raw sRGB / Bayer formats with
+ <para>These four pixel formats are raw sRGB / Bayer formats with
12 bits per colour. Each colour component is stored in a 16-bit word, with 4
unused high bits filled with zeros. Each n-pixel row contains n/2 green samples
and n/2 blue or red samples, with alternating red and blue rows. Bytes are
diff --git a/Documentation/DocBook/media/v4l/pixfmt.xml b/Documentation/DocBook/media/v4l/pixfmt.xml
index d5eca4b8f74b..5e0352c50324 100644
--- a/Documentation/DocBook/media/v4l/pixfmt.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt.xml
@@ -1405,6 +1405,7 @@ access the palette, this must be done with ioctls of the Linux framebuffer API.<
&sub-srggb8;
&sub-sbggr16;
&sub-srggb10;
+ &sub-srggb10p;
&sub-srggb10alaw8;
&sub-srggb10dpcm8;
&sub-srggb12;
diff --git a/Documentation/DocBook/media/v4l/vidioc-dv-timings-cap.xml b/Documentation/DocBook/media/v4l/vidioc-dv-timings-cap.xml
index 28a8c1e1c705..a2017bfcaed2 100644
--- a/Documentation/DocBook/media/v4l/vidioc-dv-timings-cap.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-dv-timings-cap.xml
@@ -212,11 +212,3 @@ standards set in the <structfield>standards</structfield> field.
&return-value;
</refsect1>
</refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml b/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml
index b9fdfeacdbcb..6e3cadd4e1f9 100644
--- a/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml
@@ -131,11 +131,3 @@ is out of bounds or the <structfield>pad</structfield> number is invalid.</para>
</variablelist>
</refsect1>
</refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt b/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt
new file mode 100644
index 000000000000..855e1faf73e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt
@@ -0,0 +1,63 @@
+SMIA/SMIA++ sensor
+
+SMIA (Standard Mobile Imaging Architecture) is an image sensor standard
+defined jointly by Nokia and ST. SMIA++, defined by Nokia, is an extension
+of that. These definitions are valid for both types of sensors.
+
+More detailed documentation can be found in
+Documentation/devicetree/bindings/media/video-interfaces.txt .
+
+
+Mandatory properties
+--------------------
+
+- compatible: "nokia,smia"
+- reg: I2C address (0x10, or an alternative address)
+- vana-supply: Analogue voltage supply (VANA), typically 2,8 volts (sensor
+ dependent).
+- clocks: External clock to the sensor
+- clock-frequency: Frequency of the external clock to the sensor
+- link-frequencies: List of allowed data link frequencies. An array of
+ 64-bit elements.
+
+
+Optional properties
+-------------------
+
+- nokia,nvm-size: The size of the NVM, in bytes. If the size is not given,
+ the NVM contents will not be read.
+- reset-gpios: XSHUTDOWN GPIO
+
+
+Endpoint node mandatory properties
+----------------------------------
+
+- clock-lanes: <0>
+- data-lanes: <1..n>
+- remote-endpoint: A phandle to the bus receiver's endpoint node.
+
+
+Example
+-------
+
+&i2c2 {
+ clock-frequency = <400000>;
+
+ smiapp_1: camera@10 {
+ compatible = "nokia,smia";
+ reg = <0x10>;
+ reset-gpios = <&gpio3 20 0>;
+ vana-supply = <&vaux3>;
+ clocks = <&omap3_isp 0>;
+ clock-frequency = <9600000>;
+ nokia,nvm-size = <512>; /* 8 * 64 */
+ link-frequencies = /bits/ 64 <199200000 210000000 499200000>;
+ port {
+ smiapp_1_1: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&csi2a_ep>;
+ };
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/media/sunxi-ir.txt b/Documentation/devicetree/bindings/media/sunxi-ir.txt
index 23dd5ad07b7c..1811a067c72c 100644
--- a/Documentation/devicetree/bindings/media/sunxi-ir.txt
+++ b/Documentation/devicetree/bindings/media/sunxi-ir.txt
@@ -1,7 +1,7 @@
Device-Tree bindings for SUNXI IR controller found in sunXi SoC family
Required properties:
-- compatible : should be "allwinner,sun4i-a10-ir";
+- compatible : "allwinner,sun4i-a10-ir" or "allwinner,sun5i-a13-ir"
- clocks : list of clock specifiers, corresponding to
entries in clock-names property;
- clock-names : should contain "apb" and "ir" entries;
@@ -10,6 +10,7 @@ Required properties:
Optional properties:
- linux,rc-map-name : Remote control map name.
+- resets : phandle + reset specifier pair
Example:
@@ -17,6 +18,7 @@ ir0: ir@01c21800 {
compatible = "allwinner,sun4i-a10-ir";
clocks = <&apb0_gates 6>, <&ir0_clk>;
clock-names = "apb", "ir";
+ resets = <&apb0_rst 1>;
interrupts = <0 5 1>;
reg = <0x01C21800 0x40>;
linux,rc-map-name = "rc-rc6-mce";
diff --git a/Documentation/devicetree/bindings/media/ti-am437x-vpfe.txt b/Documentation/devicetree/bindings/media/ti-am437x-vpfe.txt
new file mode 100644
index 000000000000..3932e766553a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/ti-am437x-vpfe.txt
@@ -0,0 +1,61 @@
+Texas Instruments AM437x CAMERA (VPFE)
+--------------------------------------
+
+The Video Processing Front End (VPFE) is a key component for image capture
+applications. The capture module provides the system interface and the
+processing capability to connect RAW image-sensor modules and video decoders
+to the AM437x device.
+
+Required properties:
+- compatible: must be "ti,am437x-vpfe"
+- reg: physical base address and length of the registers set for the device;
+- interrupts: should contain IRQ line for the VPFE;
+- ti,am437x-vpfe-interface: can be one of the following,
+ 0 - Raw Bayer Interface.
+ 1 - 8 Bit BT656 Interface.
+ 2 - 10 Bit BT656 Interface.
+ 3 - YCbCr 8 Bit Interface.
+ 4 - YCbCr 16 Bit Interface.
+
+VPFE supports a single port node with parallel bus. It should contain one
+'port' child node with child 'endpoint' node. Please refer to the bindings
+defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+ vpfe: vpfe@f0034000 {
+ compatible = "ti,am437x-vpfe";
+ reg = <0x48328000 0x2000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&vpfe_pins_default>;
+ pinctrl-1 = <&vpfe_pins_sleep>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vpfe0_ep: endpoint {
+ remote-endpoint = <&ov2659_1>;
+ ti,am437x-vpfe-interface = <0>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+ };
+
+ i2c1: i2c@4802a000 {
+
+ ov2659@30 {
+ compatible = "ti,ov2659";
+ reg = <0x30>;
+
+ port {
+ ov2659_1: endpoint {
+ remote-endpoint = <&vpfe0_ep>;
+ bus-width = <8>;
+ mclk-frequency = <12000000>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt
index ce719f89dd1c..52a14cf099ac 100644
--- a/Documentation/devicetree/bindings/media/video-interfaces.txt
+++ b/Documentation/devicetree/bindings/media/video-interfaces.txt
@@ -103,6 +103,9 @@ Optional endpoint properties
array contains only one entry.
- clock-noncontinuous: a boolean property to allow MIPI CSI-2 non-continuous
clock mode.
+- link-frequencies: Allowed data bus frequencies. For MIPI CSI-2, for
+ instance, this is the actual frequency of the bus, not bits per clock per
+ lane value. An array of 64-bit unsigned integers.
Example
diff --git a/Documentation/video4linux/CQcam.txt b/Documentation/video4linux/CQcam.txt
deleted file mode 100644
index 0b69e4ee8e31..000000000000
--- a/Documentation/video4linux/CQcam.txt
+++ /dev/null
@@ -1,205 +0,0 @@
-c-qcam - Connectix Color QuickCam video4linux kernel driver
-
-Copyright (C) 1999 Dave Forrest <drf5n@virginia.edu>
- released under GNU GPL.
-
-1999-12-08 Dave Forrest, written with kernel version 2.2.12 in mind
-
-
-Table of Contents
-
-1.0 Introduction
-2.0 Compilation, Installation, and Configuration
-3.0 Troubleshooting
-4.0 Future Work / current work arounds
-9.0 Sample Program, v4lgrab
-10.0 Other Information
-
-
-1.0 Introduction
-
- The file ../../drivers/media/parport/c-qcam.c is a device driver for
-the Logitech (nee Connectix) parallel port interface color CCD camera.
-This is a fairly inexpensive device for capturing images. Logitech
-does not currently provide information for developers, but many people
-have engineered several solutions for non-Microsoft use of the Color
-Quickcam.
-
-1.1 Motivation
-
- I spent a number of hours trying to get my camera to work, and I
-hope this document saves you some time. My camera will not work with
-the 2.2.13 kernel as distributed, but with a few patches to the
-module, I was able to grab some frames. See 4.0, Future Work.
-
-
-
-2.0 Compilation, Installation, and Configuration
-
- The c-qcam depends on parallel port support, video4linux, and the
-Color Quickcam. It is also nice to have the parallel port readback
-support enabled. I enabled these as modules during the kernel
-configuration. The appropriate flags are:
-
- CONFIG_PRINTER M for lp.o, parport.o parport_pc.o modules
- CONFIG_PNP_PARPORT M for autoprobe.o IEEE1284 readback module
- CONFIG_PRINTER_READBACK M for parport_probe.o IEEE1284 readback module
- CONFIG_VIDEO_DEV M for videodev.o video4linux module
- CONFIG_VIDEO_CQCAM M for c-qcam.o Color Quickcam module
-
- With these flags, the kernel should compile and install the modules.
-To record and monitor the compilation, I use:
-
- (make zlilo ; \
- make modules; \
- make modules_install ;
- depmod -a ) &>log &
- less log # then a capital 'F' to watch the progress
-
-But that is my personal preference.
-
-2.2 Configuration
-
- The configuration requires module configuration and device
-configuration. The following sections detail these procedures.
-
-
-2.1 Module Configuration
-
- Using modules requires a bit of work to install and pass the
-parameters. Understand that entries in /etc/modprobe.d/*.conf of:
-
- alias parport_lowlevel parport_pc
- options parport_pc io=0x378 irq=none
- alias char-major-81 videodev
- alias char-major-81-0 c-qcam
-
-2.2 Device Configuration
-
- At this point, we need to ensure that the device files exist.
-Video4linux used the /dev/video* files, and we want to attach the
-Quickcam to one of these.
-
- ls -lad /dev/video* # should produce a list of the video devices
-
-If the video devices do not exist, you can create them with:
-
- su
- cd /dev
- for ii in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ; do
- mknod video$ii c 81 $ii # char-major-81-[0-16]
- chown root.root video$ii # owned by root
- chmod 600 video$ii # read/writable by root only
- done
-
- Lots of people connect video0 to video and bttv, but you might want
-your c-qcam to mean something more:
-
- ln -s video0 c-qcam # make /dev/c-qcam a working file
- ln -s c-qcam video # make /dev/c-qcam your default video source
-
- But these are conveniences. The important part is to make the proper
-special character files with the right major and minor numbers. All
-of the special device files are listed in ../devices.txt. If you
-would like the c-qcam readable by non-root users, you will need to
-change the permissions.
-
-3.0 Troubleshooting
-
- If the sample program below, v4lgrab, gives you output then
-everything is working.
-
- v4lgrab | wc # should give you a count of characters
-
- Otherwise, you have some problem.
-
- The c-qcam is IEEE1284 compatible, so if you are using the proc file
-system (CONFIG_PROC_FS), the parallel printer support
-(CONFIG_PRINTER), the IEEE 1284 system,(CONFIG_PRINTER_READBACK), you
-should be able to read some identification from your quickcam with
-
- modprobe -v parport
- modprobe -v parport_probe
- cat /proc/parport/PORTNUMBER/autoprobe
-Returns:
- CLASS:MEDIA;
- MODEL:Color QuickCam 2.0;
- MANUFACTURER:Connectix;
-
- A good response to this indicates that your color quickcam is alive
-and well. A common problem is that the current driver does not
-reliably detect a c-qcam, even though one is attached. In this case,
-
- modprobe -v c-qcam
-or
- insmod -v c-qcam
-
- Returns a message saying "Device or resource busy" Development is
-currently underway, but a workaround is to patch the module to skip
-the detection code and attach to a defined port. Check the
-video4linux mailing list and archive for more current information.
-
-3.1 Checklist:
-
- Can you get an image?
- v4lgrab >qcam.ppm ; wc qcam.ppm ; xv qcam.ppm
-
- Is a working c-qcam connected to the port?
- grep ^ /proc/parport/?/autoprobe
-
- Do the /dev/video* files exist?
- ls -lad /dev/video
-
- Is the c-qcam module loaded?
- modprobe -v c-qcam ; lsmod
-
- Does the camera work with alternate programs? cqcam, etc?
-
-
-
-
-4.0 Future Work / current workarounds
-
- It is hoped that this section will soon become obsolete, but if it
-isn't, you might try patching the c-qcam module to add a parport=xxx
-option as in the bw-qcam module so you can specify the parallel port:
-
- insmod -v c-qcam parport=0
-
-And bypass the detection code, see ../../drivers/char/c-qcam.c and
-look for the 'qc_detect' code and call.
-
- Note that there is work in progress to change the video4linux API,
-this work is documented at the video4linux2 site listed below.
-
-
-9.0 --- A sample program using v4lgrabber,
-
-v4lgrab is a simple image grabber that will copy a frame from the
-first video device, /dev/video0 to standard output in portable pixmap
-format (.ppm) To produce .jpg output, you can use it like this:
-'v4lgrab | convert - c-qcam.jpg'
-
-
-10.0 --- Other Information
-
-Use the ../../Maintainers file, particularly the VIDEO FOR LINUX and PARALLEL
-PORT SUPPORT sections
-
-The video4linux page:
- http://linuxtv.org
-
-The V4L2 API spec:
- http://v4l2spec.bytesex.org/
-
-Some web pages about the quickcams:
- http://www.pingouin-land.com/howto/QuickCam-HOWTO.html
-
- http://www.crynwr.com/qcpc/ QuickCam Third-Party Drivers
- http://www.crynwr.com/qcpc/re.html Some Reverse Engineering
- http://www.wirelesscouch.net/software/gqcam/ v4l client
- http://phobos.illtel.denver.co.us/pub/qcread/ doesn't use v4l
- ftp://ftp.cs.unm.edu/pub/chris/quickcam/ Has lots of drivers
- http://www.cs.duke.edu/~reynolds/quickcam/ Has lots of information
-
-
diff --git a/Documentation/video4linux/README.tlg2300 b/Documentation/video4linux/README.tlg2300
deleted file mode 100644
index 416ccb93d8c9..000000000000
--- a/Documentation/video4linux/README.tlg2300
+++ /dev/null
@@ -1,47 +0,0 @@
-tlg2300 release notes
-====================
-
-This is a v4l2/dvb device driver for the tlg2300 chip.
-
-
-current status
-==============
-
-video
- - support mmap and read().(no overlay)
-
-audio
- - The driver will register a ALSA card for the audio input.
-
-vbi
- - Works for almost TV norms.
-
-dvb-t
- - works for DVB-T
-
-FM
- - Works for radio.
-
----------------------------------------------------------------------------
-TESTED APPLICATIONS:
-
--VLC1.0.4 test the video and dvb. The GUI is friendly to use.
-
--Mplayer test the video.
-
--Mplayer test the FM. The mplayer should be compiled with --enable-radio and
- --enable-radio-capture.
- The command runs as this(The alsa audio registers to card 1):
- #mplayer radio://103.7/capture/ -radio adevice=hw=1,0:arate=48000 \
- -rawaudio rate=48000:channels=2
-
----------------------------------------------------------------------------
-KNOWN PROBLEMS:
-about preemphasis:
- You can set the preemphasis for radio by the following command:
- #v4l2-ctl -d /dev/radio0 --set-ctrl=pre_emphasis_settings=1
-
- "pre_emphasis_settings=1" means that you select the 50us. If you want
- to select the 75us, please use "pre_emphasis_settings=2"
-
-
diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt
index a11dff07ef71..f586e29ce221 100644
--- a/Documentation/video4linux/v4l2-framework.txt
+++ b/Documentation/video4linux/v4l2-framework.txt
@@ -793,8 +793,10 @@ video_register_device_no_warn() instead.
Whenever a device node is created some attributes are also created for you.
If you look in /sys/class/video4linux you see the devices. Go into e.g.
-video0 and you will see 'name' and 'index' attributes. The 'name' attribute
-is the 'name' field of the video_device struct.
+video0 and you will see 'name', 'debug' and 'index' attributes. The 'name'
+attribute is the 'name' field of the video_device struct. The 'debug' attribute
+can be used to enable core debugging. See the next section for more detailed
+information on this.
The 'index' attribute is the index of the device node: for each call to
video_register_device() the index is just increased by 1. The first video
@@ -816,6 +818,25 @@ video_device was embedded in it. The vdev->release() callback will never
be called if the registration failed, nor should you ever attempt to
unregister the device if the registration failed.
+video device debugging
+----------------------
+
+The 'debug' attribute that is created for each video, vbi, radio or swradio
+device in /sys/class/video4linux/<devX>/ allows you to enable logging of
+file operations.
+
+It is a bitmask and the following bits can be set:
+
+0x01: Log the ioctl name and error code. VIDIOC_(D)QBUF ioctls are only logged
+ if bit 0x08 is also set.
+0x02: Log the ioctl name arguments and error code. VIDIOC_(D)QBUF ioctls are
+ only logged if bit 0x08 is also set.
+0x04: Log the file operations open, release, read, write, mmap and
+ get_unmapped_area. The read and write operations are only logged if
+ bit 0x08 is also set.
+0x08: Log the read and write file operations and the VIDIOC_QBUF and
+ VIDIOC_DQBUF ioctls.
+0x10: Log the poll file operation.
video_device cleanup
--------------------
diff --git a/Documentation/video4linux/w9966.txt b/Documentation/video4linux/w9966.txt
deleted file mode 100644
index 855024525fd2..000000000000
--- a/Documentation/video4linux/w9966.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-W9966 Camera driver, written by Jakob Kemi (jakob.kemi@telia.com)
-
-After a lot of work in softice & wdasm, reading .pdf-files and tiresome
-trial-and-error work I've finally got everything to work. I needed vision for a
-robotics project so I borrowed this camera from a friend and started hacking.
-Anyway I've converted my original code from the AVR 8bit RISC C/ASM code into
-a working Linux driver.
-
-To get it working simply configure your kernel to support
-parport, ieee1284, video4linux and w9966
-
-If w9966 is statically linked it will always perform aggressive probing for
-the camera. If built as a module you'll have more configuration options.
-
-Options:
- modprobe w9966.o pardev=parport0(or whatever) parmode=0 (0=auto, 1=ecp, 2=epp)
-voila!
-
-you can also type 'modinfo -p w9966.o' for option usage
-(or checkout w9966.c)
-
-The only thing to keep in mind is that the image format is in Y-U-Y-V format
-where every two pixels take 4 bytes. In SDL (www.libsdl.org) this format
-is called VIDEO_PALETTE_YUV422 (16 bpp).
-
-A minimal test application (with source) is available from:
- http://www.slackwaresupport.com/howtos/Webcam-HOWTO
-
-The slow framerate is due to missing DMA ECP read support in the
-parport drivers. I might add working EPP support later.
-
-Good luck!
- /Jakob Kemi