diff options
author | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2023-10-02 09:17:05 +0300 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2023-10-02 09:17:05 +0300 |
commit | 45a1c8dfa28a0b8b6954d5905bee04877d2ad548 (patch) | |
tree | 89daea9f4cce0aef81202a979ed767e498aeca61 /Documentation | |
parent | c980248179d655d33af47f0b0bec1ce8660994c6 (diff) | |
parent | 8a749fd1a8720d4619c91c8b6e7528c0a355c0aa (diff) | |
download | linux-45a1c8dfa28a0b8b6954d5905bee04877d2ad548.tar.xz |
Merge 6.6-rc4 into tty-next
We need the tty fixes in here as well for testing and to base changes
on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/admin-guide/cgroup-v1/memory.rst | 7 | ||||
-rw-r--r-- | Documentation/arch/arm64/cpu-feature-registers.rst | 12 | ||||
-rw-r--r-- | Documentation/arch/arm64/elf_hwcaps.rst | 3 | ||||
-rw-r--r-- | Documentation/arch/loongarch/introduction.rst | 4 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/ata/pata-common.yaml | 1 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/clock/renesas,5p35023.yaml | 11 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/i2c/i2c-mxs.yaml | 5 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml | 43 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml | 7 | ||||
-rw-r--r-- | Documentation/filesystems/porting.rst | 96 | ||||
-rw-r--r-- | Documentation/kbuild/kconfig-language.rst | 26 | ||||
-rw-r--r-- | Documentation/networking/ax25.rst | 4 | ||||
-rw-r--r-- | Documentation/sound/designs/midi-2.0.rst | 4 | ||||
-rw-r--r-- | Documentation/translations/zh_CN/arch/loongarch/introduction.rst | 4 |
14 files changed, 208 insertions, 19 deletions
diff --git a/Documentation/admin-guide/cgroup-v1/memory.rst b/Documentation/admin-guide/cgroup-v1/memory.rst index 5f502bf68fbc..ff456871bf4b 100644 --- a/Documentation/admin-guide/cgroup-v1/memory.rst +++ b/Documentation/admin-guide/cgroup-v1/memory.rst @@ -92,6 +92,13 @@ Brief summary of control files. memory.oom_control set/show oom controls. memory.numa_stat show the number of memory usage per numa node + memory.kmem.limit_in_bytes Deprecated knob to set and read the kernel + memory hard limit. Kernel hard limit is not + supported since 5.16. Writing any value to + do file will not have any effect same as if + nokmem kernel parameter was specified. + Kernel memory is still charged and reported + by memory.kmem.usage_in_bytes. memory.kmem.usage_in_bytes show current kernel memory allocation memory.kmem.failcnt show the number of kernel memory usage hits limits diff --git a/Documentation/arch/arm64/cpu-feature-registers.rst b/Documentation/arch/arm64/cpu-feature-registers.rst index 4e4625f2455f..de6d8a4790e2 100644 --- a/Documentation/arch/arm64/cpu-feature-registers.rst +++ b/Documentation/arch/arm64/cpu-feature-registers.rst @@ -175,6 +175,8 @@ infrastructure: +------------------------------+---------+---------+ | Name | bits | visible | +------------------------------+---------+---------+ + | SME | [27-24] | y | + +------------------------------+---------+---------+ | MTE | [11-8] | y | +------------------------------+---------+---------+ | SSBS | [7-4] | y | @@ -288,8 +290,18 @@ infrastructure: +------------------------------+---------+---------+ | Name | bits | visible | +------------------------------+---------+---------+ + | CSSC | [55-52] | y | + +------------------------------+---------+---------+ + | RPRFM | [51-48] | y | + +------------------------------+---------+---------+ + | BC | [23-20] | y | + +------------------------------+---------+---------+ | MOPS | [19-16] | y | +------------------------------+---------+---------+ + | APA3 | [15-12] | y | + +------------------------------+---------+---------+ + | GPA3 | [11-8] | y | + +------------------------------+---------+---------+ | RPRES | [7-4] | y | +------------------------------+---------+---------+ | WFXT | [3-0] | y | diff --git a/Documentation/arch/arm64/elf_hwcaps.rst b/Documentation/arch/arm64/elf_hwcaps.rst index 8c8addb4194c..76ff9d7398fd 100644 --- a/Documentation/arch/arm64/elf_hwcaps.rst +++ b/Documentation/arch/arm64/elf_hwcaps.rst @@ -305,6 +305,9 @@ HWCAP2_SMEF16F16 HWCAP2_MOPS Functionality implied by ID_AA64ISAR2_EL1.MOPS == 0b0001. +HWCAP2_HBC + Functionality implied by ID_AA64ISAR2_EL1.BC == 0b0001. + 4. Unused AT_HWCAP bits ----------------------- diff --git a/Documentation/arch/loongarch/introduction.rst b/Documentation/arch/loongarch/introduction.rst index 49135d451ced..8c568cfc2107 100644 --- a/Documentation/arch/loongarch/introduction.rst +++ b/Documentation/arch/loongarch/introduction.rst @@ -381,9 +381,9 @@ Documentation of LoongArch ISA: Documentation of LoongArch ELF psABI: - https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-ELF-ABI-v2.00-CN.pdf (in Chinese) + https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-ELF-ABI-v2.01-CN.pdf (in Chinese) - https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-ELF-ABI-v2.00-EN.pdf (in English) + https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-ELF-ABI-v2.01-EN.pdf (in English) Linux kernel repository of Loongson and LoongArch: diff --git a/Documentation/devicetree/bindings/ata/pata-common.yaml b/Documentation/devicetree/bindings/ata/pata-common.yaml index 337ddf1113c4..4e867dd4d402 100644 --- a/Documentation/devicetree/bindings/ata/pata-common.yaml +++ b/Documentation/devicetree/bindings/ata/pata-common.yaml @@ -38,6 +38,7 @@ patternProperties: ID number 0 and the slave drive will have ID number 1. The PATA port nodes will be named "ide-port". type: object + additionalProperties: false properties: reg: diff --git a/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml b/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml index 839648e753d4..42b6f80613f3 100644 --- a/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml +++ b/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml @@ -37,6 +37,9 @@ properties: maxItems: 1 '#clock-cells': + description: + The index in the assigned-clocks is mapped to the output clock as below + 0 - REF, 1 - SE1, 2 - SE2, 3 - SE3, 4 - DIFF1, 5 - DIFF2. const: 1 clocks: @@ -68,7 +71,7 @@ examples: reg = <0x68>; #clock-cells = <1>; - clocks = <&x1_x2>; + clocks = <&x1>; renesas,settings = [ 80 00 11 19 4c 02 23 7f 83 19 08 a9 5f 25 24 bf @@ -79,8 +82,8 @@ examples: assigned-clocks = <&versa3 0>, <&versa3 1>, <&versa3 2>, <&versa3 3>, <&versa3 4>, <&versa3 5>; - assigned-clock-rates = <12288000>, <25000000>, - <12000000>, <11289600>, - <11289600>, <24000000>; + assigned-clock-rates = <24000000>, <11289600>, + <11289600>, <12000000>, + <25000000>, <12288000>; }; }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml index 21ae7bce038e..171a41407241 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml @@ -9,6 +9,9 @@ title: Freescale MXS Inter IC (I2C) Controller maintainers: - Shawn Guo <shawnguo@kernel.org> +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + properties: compatible: enum: @@ -37,7 +40,7 @@ required: - dmas - dma-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml b/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml index da2dcfeebf12..510f6cb0f084 100644 --- a/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml +++ b/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml @@ -11,11 +11,16 @@ maintainers: properties: compatible: - items: - - enum: - - loongson,ls2k0500-pmc - - loongson,ls2k1000-pmc - - const: syscon + oneOf: + - items: + - const: loongson,ls2k0500-pmc + - const: syscon + - items: + - enum: + - loongson,ls2k1000-pmc + - loongson,ls2k2000-pmc + - const: loongson,ls2k0500-pmc + - const: syscon reg: maxItems: 1 @@ -32,6 +37,18 @@ properties: addition, the PM need according to it to indicate that current SoC whether support Suspend To RAM. + syscon-poweroff: + $ref: /schemas/power/reset/syscon-poweroff.yaml# + type: object + description: + Node for power off method + + syscon-reboot: + $ref: /schemas/power/reset/syscon-reboot.yaml# + type: object + description: + Node for reboot method + required: - compatible - reg @@ -44,9 +61,23 @@ examples: #include <dt-bindings/interrupt-controller/irq.h> power-management@1fe27000 { - compatible = "loongson,ls2k1000-pmc", "syscon"; + compatible = "loongson,ls2k1000-pmc", "loongson,ls2k0500-pmc", "syscon"; reg = <0x1fe27000 0x58>; interrupt-parent = <&liointc1>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; loongson,suspend-address = <0x0 0x1c000500>; + + syscon-reboot { + compatible = "syscon-reboot"; + offset = <0x30>; + mask = <0x1>; + }; + + syscon-poweroff { + compatible = "syscon-poweroff"; + regmap = <&pmc>; + offset = <0x14>; + mask = <0x3c00>; + value = <0x3c00>; + }; }; diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml index 2f593c7225e5..14cac0e6e0a1 100644 --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml @@ -23,6 +23,13 @@ properties: - const: fsl,imx51-ecspi - const: fsl,imx53-ecspi - items: + - enum: + - fsl,imx25-cspi + - fsl,imx50-cspi + - fsl,imx51-cspi + - fsl,imx53-cspi + - const: fsl,imx35-cspi + - items: - const: fsl,imx8mp-ecspi - const: fsl,imx6ul-ecspi - items: diff --git a/Documentation/filesystems/porting.rst b/Documentation/filesystems/porting.rst index deac4e973ddc..4d05b9862451 100644 --- a/Documentation/filesystems/porting.rst +++ b/Documentation/filesystems/porting.rst @@ -949,3 +949,99 @@ mmap_lock held. All in-tree users have been audited and do not seem to depend on the mmap_lock being held, but out of tree users should verify for themselves. If they do need it, they can return VM_FAULT_RETRY to be called with the mmap_lock held. + +--- + +**mandatory** + +The order of opening block devices and matching or creating superblocks has +changed. + +The old logic opened block devices first and then tried to find a +suitable superblock to reuse based on the block device pointer. + +The new logic tries to find a suitable superblock first based on the device +number, and opening the block device afterwards. + +Since opening block devices cannot happen under s_umount because of lock +ordering requirements s_umount is now dropped while opening block devices and +reacquired before calling fill_super(). + +In the old logic concurrent mounters would find the superblock on the list of +superblocks for the filesystem type. Since the first opener of the block device +would hold s_umount they would wait until the superblock became either born or +was discarded due to initialization failure. + +Since the new logic drops s_umount concurrent mounters could grab s_umount and +would spin. Instead they are now made to wait using an explicit wait-wake +mechanism without having to hold s_umount. + +--- + +**mandatory** + +The holder of a block device is now the superblock. + +The holder of a block device used to be the file_system_type which wasn't +particularly useful. It wasn't possible to go from block device to owning +superblock without matching on the device pointer stored in the superblock. +This mechanism would only work for a single device so the block layer couldn't +find the owning superblock of any additional devices. + +In the old mechanism reusing or creating a superblock for a racing mount(2) and +umount(2) relied on the file_system_type as the holder. This was severly +underdocumented however: + +(1) Any concurrent mounter that managed to grab an active reference on an + existing superblock was made to wait until the superblock either became + ready or until the superblock was removed from the list of superblocks of + the filesystem type. If the superblock is ready the caller would simple + reuse it. + +(2) If the mounter came after deactivate_locked_super() but before + the superblock had been removed from the list of superblocks of the + filesystem type the mounter would wait until the superblock was shutdown, + reuse the block device and allocate a new superblock. + +(3) If the mounter came after deactivate_locked_super() and after + the superblock had been removed from the list of superblocks of the + filesystem type the mounter would reuse the block device and allocate a new + superblock (the bd_holder point may still be set to the filesystem type). + +Because the holder of the block device was the file_system_type any concurrent +mounter could open the block devices of any superblock of the same +file_system_type without risking seeing EBUSY because the block device was +still in use by another superblock. + +Making the superblock the owner of the block device changes this as the holder +is now a unique superblock and thus block devices associated with it cannot be +reused by concurrent mounters. So a concurrent mounter in (2) could suddenly +see EBUSY when trying to open a block device whose holder was a different +superblock. + +The new logic thus waits until the superblock and the devices are shutdown in +->kill_sb(). Removal of the superblock from the list of superblocks of the +filesystem type is now moved to a later point when the devices are closed: + +(1) Any concurrent mounter managing to grab an active reference on an existing + superblock is made to wait until the superblock is either ready or until + the superblock and all devices are shutdown in ->kill_sb(). If the + superblock is ready the caller will simply reuse it. + +(2) If the mounter comes after deactivate_locked_super() but before + the superblock has been removed from the list of superblocks of the + filesystem type the mounter is made to wait until the superblock and the + devices are shut down in ->kill_sb() and the superblock is removed from the + list of superblocks of the filesystem type. The mounter will allocate a new + superblock and grab ownership of the block device (the bd_holder pointer of + the block device will be set to the newly allocated superblock). + +(3) This case is now collapsed into (2) as the superblock is left on the list + of superblocks of the filesystem type until all devices are shutdown in + ->kill_sb(). In other words, if the superblock isn't on the list of + superblock of the filesystem type anymore then it has given up ownership of + all associated block devices (the bd_holder pointer is NULL). + +As this is a VFS level change it has no practical consequences for filesystems +other than that all of them must use one of the provided kill_litter_super(), +kill_anon_super(), or kill_block_super() helpers. diff --git a/Documentation/kbuild/kconfig-language.rst b/Documentation/kbuild/kconfig-language.rst index 858ed5d80def..0135905c0aa3 100644 --- a/Documentation/kbuild/kconfig-language.rst +++ b/Documentation/kbuild/kconfig-language.rst @@ -573,6 +573,32 @@ above, leading to: bool "Support for foo hardware" depends on ARCH_FOO_VENDOR || COMPILE_TEST +Optional dependencies +~~~~~~~~~~~~~~~~~~~~~ + +Some drivers are able to optionally use a feature from another module +or build cleanly with that module disabled, but cause a link failure +when trying to use that loadable module from a built-in driver. + +The most common way to express this optional dependency in Kconfig logic +uses the slightly counterintuitive:: + + config FOO + tristate "Support for foo hardware" + depends on BAR || !BAR + +This means that there is either a dependency on BAR that disallows +the combination of FOO=y with BAR=m, or BAR is completely disabled. +For a more formalized approach if there are multiple drivers that have +the same dependency, a helper symbol can be used, like:: + + config FOO + tristate "Support for foo hardware" + depends on BAR_OPTIONAL + + config BAR_OPTIONAL + def_tristate BAR || !BAR + Kconfig recursive dependency limitations ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/networking/ax25.rst b/Documentation/networking/ax25.rst index f060cfb1445a..605e72c6c877 100644 --- a/Documentation/networking/ax25.rst +++ b/Documentation/networking/ax25.rst @@ -7,9 +7,9 @@ AX.25 To use the amateur radio protocols within Linux you will need to get a suitable copy of the AX.25 Utilities. More detailed information about AX.25, NET/ROM and ROSE, associated programs and utilities can be -found on http://www.linux-ax25.org. +found on https://linux-ax25.in-berlin.de. -There is an active mailing list for discussing Linux amateur radio matters +There is a mailing list for discussing Linux amateur radio matters called linux-hams@vger.kernel.org. To subscribe to it, send a message to majordomo@vger.kernel.org with the words "subscribe linux-hams" in the body of the message, the subject field is ignored. You don't need to be diff --git a/Documentation/sound/designs/midi-2.0.rst b/Documentation/sound/designs/midi-2.0.rst index 45987f256b97..086487ca7ab1 100644 --- a/Documentation/sound/designs/midi-2.0.rst +++ b/Documentation/sound/designs/midi-2.0.rst @@ -74,8 +74,8 @@ topology based on those information. When the device is older and doesn't respond to the new UMP inquiries, the driver falls back and builds the topology based on Group Terminal Block (GTB) information from the USB descriptor. Some device might be screwed up by the -unexpected UMP command; in such a case, pass `midi2_probe=0` option to -snd-usb-audio driver for skipping the UMP v1.1 inquiries. +unexpected UMP command; in such a case, pass `midi2_ump_probe=0` +option to snd-usb-audio driver for skipping the UMP v1.1 inquiries. When the MIDI 2.0 device is probed, the kernel creates a rawmidi device for each UMP Endpoint of the device. Its device name is diff --git a/Documentation/translations/zh_CN/arch/loongarch/introduction.rst b/Documentation/translations/zh_CN/arch/loongarch/introduction.rst index cba04befc950..59d6bf33050c 100644 --- a/Documentation/translations/zh_CN/arch/loongarch/introduction.rst +++ b/Documentation/translations/zh_CN/arch/loongarch/introduction.rst @@ -344,9 +344,9 @@ LoongArch指令集架构的文档: LoongArch的ELF psABI文档: - https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-ELF-ABI-v2.00-CN.pdf (中文版) + https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-ELF-ABI-v2.01-CN.pdf (中文版) - https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-ELF-ABI-v2.00-EN.pdf (英文版) + https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-ELF-ABI-v2.01-EN.pdf (英文版) Loongson与LoongArch的Linux内核源码仓库: |