summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-09-12 01:12:59 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2015-09-12 01:12:59 +0300
commit51a73ba5f409ef6f419c8ec3a0d1257633500aaa (patch)
tree7bd3d8c4b9b6de178342bd48636b85da79ddbd18 /Documentation
parente91eb6204fb826116453e43d4f5cf0f666bf46fe (diff)
parent6551881c86c791237a3bebf11eb3bd70b60ea782 (diff)
downloadlinux-51a73ba5f409ef6f419c8ec3a0d1257633500aaa.tar.xz
Merge git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck: - new driver for NXP LPC18xx Watchdog Timer - new driver for SAMA5D4 watchdog timer - add support for MCP79 to nv_tco driver - clean-up and improvement of the mpc8xxx watchdog driver - improvements to gpio-wdt - at91sam9_wdt clock improvements ... and other small fixes and improvements * git://www.linux-watchdog.org/linux-watchdog: (25 commits) Watchdog: Fix parent of watchdog_devices watchdog: at91rm9200: Correct check for syscon_node_to_regmap() errors watchdog: at91sam9: get and use slow clock Documentation: dt: binding: atmel-sama5d4-wdt: for SAMA5D4 watchdog driver watchdog: add a driver to support SAMA5D4 watchdog timer watchdog: mpc8xxx: allow to compile for MPC512x watchdog: mpc8xxx: use better error code when watchdog cannot be enabled watchdog: mpc8xxx: use dynamic memory for device specific data watchdog: mpc8xxx: use devm_ioremap_resource to map memory watchdog: mpc8xxx: make use of of_device_get_match_data watchdog: mpc8xxx: simplify registration watchdog: mpc8xxx: remove dead code watchdog: lpc18xx_wdt_get_timeleft() can be static DT: watchdog: Add NXP LPC18xx Watchdog Timer binding documentation watchdog: NXP LPC18xx Watchdog Timer Driver watchdog: gpio-wdt: ping already at startup for always running devices watchdog: gpio-wdt: be more strict about hw_algo matching Documentation: watchdog: at91sam9_wdt: add clocks property watchdog: booke_wdt: Use infrastructure to check timeout limits watchdog: (nv_tco) add support for MCP79 ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt35
-rw-r--r--Documentation/devicetree/bindings/watchdog/lpc18xx-wdt.txt19
-rw-r--r--Documentation/watchdog/src/watchdog-test.c22
3 files changed, 71 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt
new file mode 100644
index 000000000000..f7cc7c060910
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt
@@ -0,0 +1,35 @@
+* Atmel SAMA5D4 Watchdog Timer (WDT) Controller
+
+Required properties:
+- compatible: "atmel,sama5d4-wdt"
+- reg: base physical address and length of memory mapped region.
+
+Optional properties:
+- timeout-sec: watchdog timeout value (in seconds).
+- interrupts: interrupt number to the CPU.
+- atmel,watchdog-type: should be "hardware" or "software".
+ "hardware": enable watchdog fault reset. A watchdog fault triggers
+ watchdog reset.
+ "software": enable watchdog fault interrupt. A watchdog fault asserts
+ watchdog interrupt.
+- atmel,idle-halt: present if you want to stop the watchdog when the CPU is
+ in idle state.
+ CAUTION: This property should be used with care, it actually makes the
+ watchdog not counting when the CPU is in idle state, therefore the
+ watchdog reset time depends on mean CPU usage and will not reset at all
+ if the CPU stop working while it is in idle state, which is probably
+ not what you want.
+- atmel,dbg-halt: present if you want to stop the watchdog when the CPU is
+ in debug state.
+
+Example:
+ watchdog@fc068640 {
+ compatible = "atmel,sama5d4-wdt";
+ reg = <0xfc068640 0x10>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH 5>;
+ timeout-sec = <10>;
+ atmel,watchdog-type = "hardware";
+ atmel,dbg-halt;
+ atmel,idle-halt;
+ status = "okay";
+ };
diff --git a/Documentation/devicetree/bindings/watchdog/lpc18xx-wdt.txt b/Documentation/devicetree/bindings/watchdog/lpc18xx-wdt.txt
new file mode 100644
index 000000000000..09f6b24969e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/lpc18xx-wdt.txt
@@ -0,0 +1,19 @@
+* NXP LPC18xx Watchdog Timer (WDT)
+
+Required properties:
+- compatible: Should be "nxp,lpc1850-wwdt"
+- reg: Should contain WDT registers location and length
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names: Should contain "wdtclk" and "reg"; the watchdog counter
+ clock and register interface clock respectively.
+- interrupts: Should contain WDT interrupt
+
+Examples:
+
+watchdog@40080000 {
+ compatible = "nxp,lpc1850-wwdt";
+ reg = <0x40080000 0x24>;
+ clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_WWDT>;
+ clock-names = "wdtclk", "reg";
+ interrupts = <49>;
+};
diff --git a/Documentation/watchdog/src/watchdog-test.c b/Documentation/watchdog/src/watchdog-test.c
index 3da822967ee0..fcdde8fc98be 100644
--- a/Documentation/watchdog/src/watchdog-test.c
+++ b/Documentation/watchdog/src/watchdog-test.c
@@ -41,6 +41,7 @@ static void term(int sig)
int main(int argc, char *argv[])
{
int flags;
+ unsigned int ping_rate = 1;
fd = open("/dev/watchdog", O_WRONLY);
@@ -63,22 +64,33 @@ int main(int argc, char *argv[])
fprintf(stderr, "Watchdog card enabled.\n");
fflush(stderr);
goto end;
+ } else if (!strncasecmp(argv[1], "-t", 2) && argv[2]) {
+ flags = atoi(argv[2]);
+ ioctl(fd, WDIOC_SETTIMEOUT, &flags);
+ fprintf(stderr, "Watchdog timeout set to %u seconds.\n", flags);
+ fflush(stderr);
+ goto end;
+ } else if (!strncasecmp(argv[1], "-p", 2) && argv[2]) {
+ ping_rate = strtoul(argv[2], NULL, 0);
+ fprintf(stderr, "Watchdog ping rate set to %u seconds.\n", ping_rate);
+ fflush(stderr);
} else {
- fprintf(stderr, "-d to disable, -e to enable.\n");
+ fprintf(stderr, "-d to disable, -e to enable, -t <n> to set " \
+ "the timeout,\n-p <n> to set the ping rate, and \n");
fprintf(stderr, "run by itself to tick the card.\n");
fflush(stderr);
goto end;
}
- } else {
- fprintf(stderr, "Watchdog Ticking Away!\n");
- fflush(stderr);
}
+ fprintf(stderr, "Watchdog Ticking Away!\n");
+ fflush(stderr);
+
signal(SIGINT, term);
while(1) {
keep_alive();
- sleep(1);
+ sleep(ping_rate);
}
end:
close(fd);