diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2021-09-02 01:04:29 +0300 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2021-09-02 01:04:29 +0300 |
commit | 57c78a234e809e3a0516491e37ae5ccc6eeb21e8 (patch) | |
tree | 2595806aeef867185a1472d6e4381255e26b8a84 /Documentation | |
parent | bcfeebbff3627093014c7948aec9cc4730e50c3d (diff) | |
parent | 65266a7c6abfa1ad915a362c41bf38576607f1f9 (diff) | |
download | linux-57c78a234e809e3a0516491e37ae5ccc6eeb21e8.tar.xz |
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Support for 32-bit tasks on asymmetric AArch32 systems (on top of the
scheduler changes merged via the tip tree).
- More entry.S clean-ups and conversion to C.
- MTE updates: allow a preferred tag checking mode to be set per CPU
(the overhead of synchronous mode is smaller for some CPUs than
others); optimisations for kernel entry/exit path; optionally disable
MTE on the kernel command line.
- Kselftest improvements for SVE and signal handling, PtrAuth.
- Fix unlikely race where a TLBI could use stale ASID on an ASID
roll-over (found by inspection).
- Miscellaneous fixes: disable trapping of PMSNEVFR_EL1 to higher
exception levels; drop unnecessary sigdelsetmask() call in the
signal32 handling; remove BUG_ON when failing to allocate SVE state
(just signal the process); SYM_CODE annotations.
- Other trivial clean-ups: use macros instead of magic numbers, remove
redundant returns, typos.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (56 commits)
arm64: Do not trap PMSNEVFR_EL1
arm64: mm: fix comment typo of pud_offset_phys()
arm64: signal32: Drop pointless call to sigdelsetmask()
arm64/sve: Better handle failure to allocate SVE register storage
arm64: Document the requirement for SCR_EL3.HCE
arm64: head: avoid over-mapping in map_memory
arm64/sve: Add a comment documenting the binutils needed for SVE asm
arm64/sve: Add some comments for sve_save/load_state()
kselftest/arm64: signal: Add a TODO list for signal handling tests
kselftest/arm64: signal: Add test case for SVE register state in signals
kselftest/arm64: signal: Verify that signals can't change the SVE vector length
kselftest/arm64: signal: Check SVE signal frame shows expected vector length
kselftest/arm64: signal: Support signal frames with SVE register data
kselftest/arm64: signal: Add SVE to the set of features we can check for
arm64: replace in_irq() with in_hardirq()
kselftest/arm64: pac: Fix skipping of tests on systems without PAC
Documentation: arm64: describe asymmetric 32-bit support
arm64: Remove logic to kill 32-bit tasks on 64-bit-only cores
arm64: Hook up cmdline parameter to allow mismatched 32-bit EL0
arm64: Advertise CPUs capable of running 32-bit applications in sysfs
...
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/ABI/testing/sysfs-devices-system-cpu | 26 | ||||
-rw-r--r-- | Documentation/admin-guide/kernel-parameters.txt | 14 | ||||
-rw-r--r-- | Documentation/arm64/asymmetric-32bit.rst | 155 | ||||
-rw-r--r-- | Documentation/arm64/booting.rst | 37 | ||||
-rw-r--r-- | Documentation/arm64/index.rst | 1 | ||||
-rw-r--r-- | Documentation/arm64/memory-tagging-extension.rst | 48 |
6 files changed, 270 insertions, 11 deletions
diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 160b10c029c0..b46ef147616a 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -494,6 +494,15 @@ Description: AArch64 CPU registers 'identification' directory exposes the CPU ID registers for identifying model and revision of the CPU. +What: /sys/devices/system/cpu/aarch32_el0 +Date: May 2021 +Contact: Linux ARM Kernel Mailing list <linux-arm-kernel@lists.infradead.org> +Description: Identifies the subset of CPUs in the system that can execute + AArch32 (32-bit ARM) applications. If present, the same format as + /sys/devices/system/cpu/{offline,online,possible,present} is used. + If absent, then all or none of the CPUs can execute AArch32 + applications and execve() will behave accordingly. + What: /sys/devices/system/cpu/cpu#/cpu_capacity Date: December 2016 Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> @@ -640,3 +649,20 @@ Description: SPURR ticks for cpuX when it was idle. This sysfs interface exposes the number of SPURR ticks for cpuX when it was idle. + +What: /sys/devices/system/cpu/cpuX/mte_tcf_preferred +Date: July 2021 +Contact: Linux ARM Kernel Mailing list <linux-arm-kernel@lists.infradead.org> +Description: Preferred MTE tag checking mode + + When a user program specifies more than one MTE tag checking + mode, this sysfs node is used to specify which mode should + be preferred when scheduling a task on that CPU. Possible + values: + + ================ ============================================== + "sync" Prefer synchronous mode + "async" Prefer asynchronous mode + ================ ============================================== + + See also: Documentation/arm64/memory-tagging-extension.rst diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 2102467faad6..82c932105d31 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -287,6 +287,17 @@ do not want to use tracing_snapshot_alloc() as it needs to be done where GFP_KERNEL allocations are allowed. + allow_mismatched_32bit_el0 [ARM64] + Allow execve() of 32-bit applications and setting of the + PER_LINUX32 personality on systems where only a strict + subset of the CPUs support 32-bit EL0. When this + parameter is present, the set of CPUs supporting 32-bit + EL0 is indicated by /sys/devices/system/cpu/aarch32_el0 + and hot-unplug operations may be restricted. + + See Documentation/arm64/asymmetric-32bit.rst for more + information. + amd_iommu= [HW,X86-64] Pass parameters to the AMD IOMMU driver in the system. Possible values are: @@ -380,6 +391,9 @@ arm64.nopauth [ARM64] Unconditionally disable Pointer Authentication support + arm64.nomte [ARM64] Unconditionally disable Memory Tagging Extension + support + ataflop= [HW,M68k] atarimouse= [HW,MOUSE] Atari Mouse diff --git a/Documentation/arm64/asymmetric-32bit.rst b/Documentation/arm64/asymmetric-32bit.rst new file mode 100644 index 000000000000..64a0b505da7d --- /dev/null +++ b/Documentation/arm64/asymmetric-32bit.rst @@ -0,0 +1,155 @@ +====================== +Asymmetric 32-bit SoCs +====================== + +Author: Will Deacon <will@kernel.org> + +This document describes the impact of asymmetric 32-bit SoCs on the +execution of 32-bit (``AArch32``) applications. + +Date: 2021-05-17 + +Introduction +============ + +Some Armv9 SoCs suffer from a big.LITTLE misfeature where only a subset +of the CPUs are capable of executing 32-bit user applications. On such +a system, Linux by default treats the asymmetry as a "mismatch" and +disables support for both the ``PER_LINUX32`` personality and +``execve(2)`` of 32-bit ELF binaries, with the latter returning +``-ENOEXEC``. If the mismatch is detected during late onlining of a +64-bit-only CPU, then the onlining operation fails and the new CPU is +unavailable for scheduling. + +Surprisingly, these SoCs have been produced with the intention of +running legacy 32-bit binaries. Unsurprisingly, that doesn't work very +well with the default behaviour of Linux. + +It seems inevitable that future SoCs will drop 32-bit support +altogether, so if you're stuck in the unenviable position of needing to +run 32-bit code on one of these transitionary platforms then you would +be wise to consider alternatives such as recompilation, emulation or +retirement. If neither of those options are practical, then read on. + +Enabling kernel support +======================= + +Since the kernel support is not completely transparent to userspace, +allowing 32-bit tasks to run on an asymmetric 32-bit system requires an +explicit "opt-in" and can be enabled by passing the +``allow_mismatched_32bit_el0`` parameter on the kernel command-line. + +For the remainder of this document we will refer to an *asymmetric +system* to mean an asymmetric 32-bit SoC running Linux with this kernel +command-line option enabled. + +Userspace impact +================ + +32-bit tasks running on an asymmetric system behave in mostly the same +way as on a homogeneous system, with a few key differences relating to +CPU affinity. + +sysfs +----- + +The subset of CPUs capable of running 32-bit tasks is described in +``/sys/devices/system/cpu/aarch32_el0`` and is documented further in +``Documentation/ABI/testing/sysfs-devices-system-cpu``. + +**Note:** CPUs are advertised by this file as they are detected and so +late-onlining of 32-bit-capable CPUs can result in the file contents +being modified by the kernel at runtime. Once advertised, CPUs are never +removed from the file. + +``execve(2)`` +------------- + +On a homogeneous system, the CPU affinity of a task is preserved across +``execve(2)``. This is not always possible on an asymmetric system, +specifically when the new program being executed is 32-bit yet the +affinity mask contains 64-bit-only CPUs. In this situation, the kernel +determines the new affinity mask as follows: + + 1. If the 32-bit-capable subset of the affinity mask is not empty, + then the affinity is restricted to that subset and the old affinity + mask is saved. This saved mask is inherited over ``fork(2)`` and + preserved across ``execve(2)`` of 32-bit programs. + + **Note:** This step does not apply to ``SCHED_DEADLINE`` tasks. + See `SCHED_DEADLINE`_. + + 2. Otherwise, the cpuset hierarchy of the task is walked until an + ancestor is found containing at least one 32-bit-capable CPU. The + affinity of the task is then changed to match the 32-bit-capable + subset of the cpuset determined by the walk. + + 3. On failure (i.e. out of memory), the affinity is changed to the set + of all 32-bit-capable CPUs of which the kernel is aware. + +A subsequent ``execve(2)`` of a 64-bit program by the 32-bit task will +invalidate the affinity mask saved in (1) and attempt to restore the CPU +affinity of the task using the saved mask if it was previously valid. +This restoration may fail due to intervening changes to the deadline +policy or cpuset hierarchy, in which case the ``execve(2)`` continues +with the affinity unchanged. + +Calls to ``sched_setaffinity(2)`` for a 32-bit task will consider only +the 32-bit-capable CPUs of the requested affinity mask. On success, the +affinity for the task is updated and any saved mask from a prior +``execve(2)`` is invalidated. + +``SCHED_DEADLINE`` +------------------ + +Explicit admission of a 32-bit deadline task to the default root domain +(e.g. by calling ``sched_setattr(2)``) is rejected on an asymmetric +32-bit system unless admission control is disabled by writing -1 to +``/proc/sys/kernel/sched_rt_runtime_us``. + +``execve(2)`` of a 32-bit program from a 64-bit deadline task will +return ``-ENOEXEC`` if the root domain for the task contains any +64-bit-only CPUs and admission control is enabled. Concurrent offlining +of 32-bit-capable CPUs may still necessitate the procedure described in +`execve(2)`_, in which case step (1) is skipped and a warning is +emitted on the console. + +**Note:** It is recommended that a set of 32-bit-capable CPUs are placed +into a separate root domain if ``SCHED_DEADLINE`` is to be used with +32-bit tasks on an asymmetric system. Failure to do so is likely to +result in missed deadlines. + +Cpusets +------- + +The affinity of a 32-bit task on an asymmetric system may include CPUs +that are not explicitly allowed by the cpuset to which it is attached. +This can occur as a result of the following two situations: + + - A 64-bit task attached to a cpuset which allows only 64-bit CPUs + executes a 32-bit program. + + - All of the 32-bit-capable CPUs allowed by a cpuset containing a + 32-bit task are offlined. + +In both of these cases, the new affinity is calculated according to step +(2) of the process described in `execve(2)`_ and the cpuset hierarchy is +unchanged irrespective of the cgroup version. + +CPU hotplug +----------- + +On an asymmetric system, the first detected 32-bit-capable CPU is +prevented from being offlined by userspace and any such attempt will +return ``-EPERM``. Note that suspend is still permitted even if the +primary CPU (i.e. CPU 0) is 64-bit-only. + +KVM +--- + +Although KVM will not advertise 32-bit EL0 support to any vCPUs on an +asymmetric system, a broken guest at EL1 could still attempt to execute +32-bit code at EL0. In this case, an exit from a vCPU thread in 32-bit +mode will return to host userspace with an ``exit_reason`` of +``KVM_EXIT_FAIL_ENTRY`` and will remain non-runnable until successfully +re-initialised by a subsequent ``KVM_ARM_VCPU_INIT`` operation. diff --git a/Documentation/arm64/booting.rst b/Documentation/arm64/booting.rst index a9192e7a231b..3f9d86557c5e 100644 --- a/Documentation/arm64/booting.rst +++ b/Documentation/arm64/booting.rst @@ -207,10 +207,17 @@ Before jumping into the kernel, the following conditions must be met: software at a higher exception level to prevent execution in an UNKNOWN state. - - SCR_EL3.FIQ must have the same value across all CPUs the kernel is - executing on. - - The value of SCR_EL3.FIQ must be the same as the one present at boot - time whenever the kernel is executing. + For all systems: + - If EL3 is present: + + - SCR_EL3.FIQ must have the same value across all CPUs the kernel is + executing on. + - The value of SCR_EL3.FIQ must be the same as the one present at boot + time whenever the kernel is executing. + + - If EL3 is present and the kernel is entered at EL2: + + - SCR_EL3.HCE (bit 8) must be initialised to 0b1. For systems with a GICv3 interrupt controller to be used in v3 mode: - If EL3 is present: @@ -311,6 +318,28 @@ Before jumping into the kernel, the following conditions must be met: - ZCR_EL2.LEN must be initialised to the same value for all CPUs the kernel will execute on. + For CPUs with the Scalable Matrix Extension (FEAT_SME): + + - If EL3 is present: + + - CPTR_EL3.ESM (bit 12) must be initialised to 0b1. + + - SCR_EL3.EnTP2 (bit 41) must be initialised to 0b1. + + - SMCR_EL3.LEN must be initialised to the same value for all CPUs the + kernel will execute on. + + - If the kernel is entered at EL1 and EL2 is present: + + - CPTR_EL2.TSM (bit 12) must be initialised to 0b0. + + - CPTR_EL2.SMEN (bits 25:24) must be initialised to 0b11. + + - SCTLR_EL2.EnTP2 (bit 60) must be initialised to 0b1. + + - SMCR_EL2.LEN must be initialised to the same value for all CPUs the + kernel will execute on. + The requirements described above for CPU mode, caches, MMUs, architected timers, coherency and system registers apply to all CPUs. All CPUs must enter the kernel in the same exception level. Where the values documented diff --git a/Documentation/arm64/index.rst b/Documentation/arm64/index.rst index 97d65ba12a35..4f840bac083e 100644 --- a/Documentation/arm64/index.rst +++ b/Documentation/arm64/index.rst @@ -10,6 +10,7 @@ ARM64 Architecture acpi_object_usage amu arm-acpi + asymmetric-32bit booting cpu-feature-registers elf_hwcaps diff --git a/Documentation/arm64/memory-tagging-extension.rst b/Documentation/arm64/memory-tagging-extension.rst index b540178a93f8..7b99c8f428eb 100644 --- a/Documentation/arm64/memory-tagging-extension.rst +++ b/Documentation/arm64/memory-tagging-extension.rst @@ -77,14 +77,20 @@ configurable behaviours: address is unknown). The user can select the above modes, per thread, using the -``prctl(PR_SET_TAGGED_ADDR_CTRL, flags, 0, 0, 0)`` system call where -``flags`` contain one of the following values in the ``PR_MTE_TCF_MASK`` +``prctl(PR_SET_TAGGED_ADDR_CTRL, flags, 0, 0, 0)`` system call where ``flags`` +contains any number of the following values in the ``PR_MTE_TCF_MASK`` bit-field: -- ``PR_MTE_TCF_NONE`` - *Ignore* tag check faults +- ``PR_MTE_TCF_NONE`` - *Ignore* tag check faults + (ignored if combined with other options) - ``PR_MTE_TCF_SYNC`` - *Synchronous* tag check fault mode - ``PR_MTE_TCF_ASYNC`` - *Asynchronous* tag check fault mode +If no modes are specified, tag check faults are ignored. If a single +mode is specified, the program will run in that mode. If multiple +modes are specified, the mode is selected as described in the "Per-CPU +preferred tag checking modes" section below. + The current tag check fault mode can be read using the ``prctl(PR_GET_TAGGED_ADDR_CTRL, 0, 0, 0, 0)`` system call. @@ -120,13 +126,39 @@ in the ``PR_MTE_TAG_MASK`` bit-field. interface provides an include mask. An include mask of ``0`` (exclusion mask ``0xffff``) results in the CPU always generating tag ``0``. +Per-CPU preferred tag checking mode +----------------------------------- + +On some CPUs the performance of MTE in stricter tag checking modes +is similar to that of less strict tag checking modes. This makes it +worthwhile to enable stricter checks on those CPUs when a less strict +checking mode is requested, in order to gain the error detection +benefits of the stricter checks without the performance downsides. To +support this scenario, a privileged user may configure a stricter +tag checking mode as the CPU's preferred tag checking mode. + +The preferred tag checking mode for each CPU is controlled by +``/sys/devices/system/cpu/cpu<N>/mte_tcf_preferred``, to which a +privileged user may write the value ``async`` or ``sync``. The default +preferred mode for each CPU is ``async``. + +To allow a program to potentially run in the CPU's preferred tag +checking mode, the user program may set multiple tag check fault mode +bits in the ``flags`` argument to the ``prctl(PR_SET_TAGGED_ADDR_CTRL, +flags, 0, 0, 0)`` system call. If the CPU's preferred tag checking +mode is in the task's set of provided tag checking modes (this will +always be the case at present because the kernel only supports two +tag checking modes, but future kernels may support more modes), that +mode will be selected. Otherwise, one of the modes in the task's mode +set will be selected in a currently unspecified manner. + Initial process state --------------------- On ``execve()``, the new process has the following configuration: - ``PR_TAGGED_ADDR_ENABLE`` set to 0 (disabled) -- Tag checking mode set to ``PR_MTE_TCF_NONE`` +- No tag checking modes are selected (tag check faults ignored) - ``PR_MTE_TAG_MASK`` set to 0 (all tags excluded) - ``PSTATE.TCO`` set to 0 - ``PROT_MTE`` not set on any of the initial memory maps @@ -251,11 +283,13 @@ Example of correct usage return EXIT_FAILURE; /* - * Enable the tagged address ABI, synchronous MTE tag check faults and - * allow all non-zero tags in the randomly generated set. + * Enable the tagged address ABI, synchronous or asynchronous MTE + * tag check faults (based on per-CPU preference) and allow all + * non-zero tags in the randomly generated set. */ if (prctl(PR_SET_TAGGED_ADDR_CTRL, - PR_TAGGED_ADDR_ENABLE | PR_MTE_TCF_SYNC | (0xfffe << PR_MTE_TAG_SHIFT), + PR_TAGGED_ADDR_ENABLE | PR_MTE_TCF_SYNC | PR_MTE_TCF_ASYNC | + (0xfffe << PR_MTE_TAG_SHIFT), 0, 0, 0)) { perror("prctl() failed"); return EXIT_FAILURE; |