Merge tag 'iio-for-4.8c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Third set of IIO new device support, features and cleanups for the 4.8 cycle.

New core features
- Selection of the clock source for IIO timestamps.  This is done per device
  as it makes little sense to have events in one timebase and data timestamped
  on another.  Biggest reason for this is that we currently use a clock
  source which is non monotonic which can result in 'interesting' data sets.
  (Includes export for get_monotonic_corse64 which Thomas Gleixner didn't mind
   in an earlier version.)
- MAINTAINERS add the git tree to the list for IIO.

New device support + a kind of indirect staging graduation.
* Broadcom iproc-static-adc
  - new driver
* mcp4531
  - support for MCP454x, MCP456x, MCP464x and MCP466x potentiometers
* mpu6050
  - support the IC20608 6 axis motion tracking device
* st-sensors
  - support the lis3l02dq + drop the lis3l02dq driver from staging.
  The general purpose driver is missing event support, but good to get
  rid of this driver which was rather long in the tooth.

New driver features
* ak8975
  - Add vid regulator support and refactor handling in general.
  - Allow a delay after enabling regulators.
  - Runtime and system PM.
* bmg160
  - filter frequency control support.
* bmp280
  - SPI device support.
  - EOC interrupt support for the BMP085
  - power management support.
  - supply regulator support.
  - reset gpio support
  - dt bindings for reset gpio and regulators.
  - of table to support device tree registration
* max1363
  - Device tree bindings.
* mcp4531
  - Device tree bindings.
* st-pressure
  - temperature channels as part of triggered buffer (previously not due
  probably to alignment issues - see below).
  - lps22hb open drain interrupt support.
  - lps22hb temperature channel support

Cleanups and reworkings.
* numerous ADC drivers
  - ensure the iio_dev->dev.of_node is set to the parent dev.of_node so
  as to allow client bindings to find the device.
* ak8975
  - Fix incorrect handling of missing regulator
  - make sure power is down and remove.
* bmp280
  - read the calibration data only once as it doesn't change.
* isl29125
  - Use a few macros to make code a touch more readable.
* mma8452
  - fix a memory leak on error.
  - drop an unecessary bit of return value handling.
* potentiometer kconfig
  - typo fix.
* st-pressure
  - drop some uninformative default assignments of elements of the channel
  array structure (aids readability).
* st-sensors
  - Harden interrupt handling considerably.  These are actually all using
  level interrupts, but at least two known boards have them wired to
  edge only interrupt chips.  Hence a slightly interesting bit of handling
  is needed in which we first allow for the easy option (level triggered) and
  secondly check the status registers before reenabling edge interrupts and
  fall back to a tight loop in the thread until we successfully clear the
  interrupt.  No harm is done if we never succeed in doing so.  It's an odd
  patch that has been through a lot of revisions to reach a consensus on how
  to handle what is basically broken hardware (which the previous defaults
  allowed to kind of work).
  - Fix alignment to defined storagebytes boundaries.
  - Ensure alignment of power of 2 byte boundaries.  This has always in theory
  been part of the ABI of IIO, but we missed a few that snuck in that need
  fixing.  The effect was minor as they were only followed by timestamp
  channels which were correctly aligned,
  - Add some docs to explain the gain calculations.

6 files changed, 189 insertions, 3 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index e7f590c6ef8e..fee35c00cc4e 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -32,6 +32,13 @@ Description:
 		Description of the physical chip / device for device X.
 		Typically a part number.
 
+What:		/sys/bus/iio/devices/iio:deviceX/timestamp_clock
+KernelVersion:	4.5
+Contact:	linux-iio@vger.kernel.org
+Description:
+		String identifying current posix clock used to timestamp
+		buffered samples and events for device X.
+
 What:		/sys/bus/iio/devices/iio:deviceX/sampling_frequency
 What:		/sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency
 What:		/sys/bus/iio/devices/triggerX/sampling_frequency
diff --git a/Documentation/DocBook/iio.tmpl b/Documentation/DocBook/iio.tmpl
index f525bf56d1dd..e2ab6a1f223e 100644
--- a/Documentation/DocBook/iio.tmpl
+++ b/Documentation/DocBook/iio.tmpl
@@ -594,7 +594,7 @@
 
     irqreturn_t sensor_iio_pollfunc(int irq, void *p)
     {
-        pf->timestamp = iio_get_time_ns();
+        pf->timestamp = iio_get_time_ns((struct indio_dev *)p);
         return IRQ_WAKE_THREAD;
     }
 
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index 539874490492..acc5cd64711c 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -56,6 +56,70 @@ maxim,ds1050		5 Bit Programmable, Pulse-Width Modulator
 maxim,max1237		Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs
 maxim,max6625		9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface
 mc,rv3029c2		Real Time Clock Module with I2C-Bus
+microchip,mcp4531-502	Microchip 7-bit Single I2C Digital Potentiometer (5k)
+microchip,mcp4531-103	Microchip 7-bit Single I2C Digital Potentiometer (10k)
+microchip,mcp4531-503	Microchip 7-bit Single I2C Digital Potentiometer (50k)
+microchip,mcp4531-104	Microchip 7-bit Single I2C Digital Potentiometer (100k)
+microchip,mcp4532-502	Microchip 7-bit Single I2C Digital Potentiometer (5k)
+microchip,mcp4532-103	Microchip 7-bit Single I2C Digital Potentiometer (10k)
+microchip,mcp4532-503	Microchip 7-bit Single I2C Digital Potentiometer (50k)
+microchip,mcp4532-104	Microchip 7-bit Single I2C Digital Potentiometer (100k)
+microchip,mcp4541-502	Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (5k)
+microchip,mcp4541-103	Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (10k)
+microchip,mcp4541-503	Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (50k)
+microchip,mcp4541-104	Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (100k)
+microchip,mcp4542-502	Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (5k)
+microchip,mcp4542-103	Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (10k)
+microchip,mcp4542-503	Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (50k)
+microchip,mcp4542-104	Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (100k)
+microchip,mcp4551-502	Microchip 8-bit Single I2C Digital Potentiometer (5k)
+microchip,mcp4551-103	Microchip 8-bit Single I2C Digital Potentiometer (10k)
+microchip,mcp4551-503	Microchip 8-bit Single I2C Digital Potentiometer (50k)
+microchip,mcp4551-104	Microchip 8-bit Single I2C Digital Potentiometer (100k)
+microchip,mcp4552-502	Microchip 8-bit Single I2C Digital Potentiometer (5k)
+microchip,mcp4552-103	Microchip 8-bit Single I2C Digital Potentiometer (10k)
+microchip,mcp4552-503	Microchip 8-bit Single I2C Digital Potentiometer (50k)
+microchip,mcp4552-104	Microchip 8-bit Single I2C Digital Potentiometer (100k)
+microchip,mcp4561-502	Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (5k)
+microchip,mcp4561-103	Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (10k)
+microchip,mcp4561-503	Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (50k)
+microchip,mcp4561-104	Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (100k)
+microchip,mcp4562-502	Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (5k)
+microchip,mcp4562-103	Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (10k)
+microchip,mcp4562-503	Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (50k)
+microchip,mcp4562-104	Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (100k)
+microchip,mcp4631-502	Microchip 7-bit Dual I2C Digital Potentiometer (5k)
+microchip,mcp4631-103	Microchip 7-bit Dual I2C Digital Potentiometer (10k)
+microchip,mcp4631-503	Microchip 7-bit Dual I2C Digital Potentiometer (50k)
+microchip,mcp4631-104	Microchip 7-bit Dual I2C Digital Potentiometer (100k)
+microchip,mcp4632-502	Microchip 7-bit Dual I2C Digital Potentiometer (5k)
+microchip,mcp4632-103	Microchip 7-bit Dual I2C Digital Potentiometer (10k)
+microchip,mcp4632-503	Microchip 7-bit Dual I2C Digital Potentiometer (50k)
+microchip,mcp4632-104	Microchip 7-bit Dual I2C Digital Potentiometer (100k)
+microchip,mcp4641-502	Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (5k)
+microchip,mcp4641-103	Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (10k)
+microchip,mcp4641-503	Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (50k)
+microchip,mcp4641-104	Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (100k)
+microchip,mcp4642-502	Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (5k)
+microchip,mcp4642-103	Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (10k)
+microchip,mcp4642-503	Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (50k)
+microchip,mcp4642-104	Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (100k)
+microchip,mcp4651-502	Microchip 8-bit Dual I2C Digital Potentiometer (5k)
+microchip,mcp4651-103	Microchip 8-bit Dual I2C Digital Potentiometer (10k)
+microchip,mcp4651-503	Microchip 8-bit Dual I2C Digital Potentiometer (50k)
+microchip,mcp4651-104	Microchip 8-bit Dual I2C Digital Potentiometer (100k)
+microchip,mcp4652-502	Microchip 8-bit Dual I2C Digital Potentiometer (5k)
+microchip,mcp4652-103	Microchip 8-bit Dual I2C Digital Potentiometer (10k)
+microchip,mcp4652-503	Microchip 8-bit Dual I2C Digital Potentiometer (50k)
+microchip,mcp4652-104	Microchip 8-bit Dual I2C Digital Potentiometer (100k)
+microchip,mcp4661-502	Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (5k)
+microchip,mcp4661-103	Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (10k)
+microchip,mcp4661-503	Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (50k)
+microchip,mcp4661-104	Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (100k)
+microchip,mcp4662-502	Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (5k)
+microchip,mcp4662-103	Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (10k)
+microchip,mcp4662-503	Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (50k)
+microchip,mcp4662-104	Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (100k)
 national,lm63		Temperature sensor with integrated fan control
 national,lm75		I2C TEMP SENSOR
 national,lm80		Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor
diff --git a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt
new file mode 100644
index 000000000000..caaaed765ce4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt
@@ -0,0 +1,41 @@
+* Broadcom's IPROC Static ADC controller
+
+Broadcom iProc ADC controller has 8 channels 10bit ADC.
+Allows user to convert analog input voltage values to digital.
+
+Required properties:
+
+- compatible: Must be "brcm,iproc-static-adc"
+
+- adc-syscon: Handler of syscon node defining physical base address of the
+  controller and length of memory mapped region.
+
+- #io-channel-cells = <1>; As ADC has multiple outputs
+  refer to Documentation/devicetree/bindings/iio/iio-bindings.txt for details.
+
+- io-channel-ranges:
+  refer to Documentation/devicetree/bindings/iio/iio-bindings.txt for details.
+
+- clocks: Clock used for this block.
+
+- clock-names: Clock name should be given as tsc_clk.
+
+- interrupts: interrupt line number.
+
+For example:
+
+	ts_adc_syscon: ts_adc_syscon@180a6000 {
+		compatible = "brcm,iproc-ts-adc-syscon","syscon";
+		reg = <0x180a6000 0xc30>;
+	};
+
+	adc: adc@180a6000 {
+		compatible = "brcm,iproc-static-adc";
+		adc-syscon = <&ts_adc_syscon>;
+		#io-channel-cells = <1>;
+		io-channel-ranges;
+		clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
+		clock-names = "tsc_clk";
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
diff --git a/Documentation/devicetree/bindings/iio/adc/max1363.txt b/Documentation/devicetree/bindings/iio/adc/max1363.txt
new file mode 100644
index 000000000000..94a9011dd860
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/max1363.txt
@@ -0,0 +1,63 @@
+* Maxim 1x3x/136x/116xx Analog to Digital Converter (ADC)
+
+The node for this driver must be a child node of a I2C controller, hence
+all mandatory properties for your controller must be specified. See directory:
+
+        Documentation/devicetree/bindings/i2c
+
+for more details.
+
+Required properties:
+  - compatible: Should be one of
+		"maxim,max1361"
+		"maxim,max1362"
+		"maxim,max1363"
+		"maxim,max1364"
+		"maxim,max1036"
+		"maxim,max1037"
+		"maxim,max1038"
+		"maxim,max1039"
+		"maxim,max1136"
+		"maxim,max1137"
+		"maxim,max1138"
+		"maxim,max1139"
+		"maxim,max1236"
+		"maxim,max1237"
+		"maxim,max1238"
+		"maxim,max1239"
+		"maxim,max11600"
+		"maxim,max11601"
+		"maxim,max11602"
+		"maxim,max11603"
+		"maxim,max11604"
+		"maxim,max11605"
+		"maxim,max11606"
+		"maxim,max11607"
+		"maxim,max11608"
+		"maxim,max11609"
+		"maxim,max11610"
+		"maxim,max11611"
+		"maxim,max11612"
+		"maxim,max11613"
+		"maxim,max11614"
+		"maxim,max11615"
+		"maxim,max11616"
+		"maxim,max11617"
+		"maxim,max11644"
+		"maxim,max11645"
+		"maxim,max11646"
+		"maxim,max11647"
+  - reg: Should contain the ADC I2C address
+
+Optional properties:
+  - vcc-supply: phandle to the regulator that provides power to the ADC.
+  - vref-supply: phandle to the regulator for ADC reference voltage.
+  - interrupts: IRQ line for the ADC. If not used the driver will use
+    polling.
+
+Example:
+adc: max11644@36 {
+	compatible = "maxim,max11644";
+	reg = <0x36>;
+	vref-supply = <&adc_vref>;
+};
diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.txt b/Documentation/devicetree/bindings/iio/pressure/bmp085.txt
index d7a6deb6b21e..c7198a03c906 100644
--- a/Documentation/devicetree/bindings/iio/pressure/bmp085.txt
+++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.txt
@@ -1,7 +1,11 @@
-BMP085/BMP18x digital pressure sensors
+BMP085/BMP18x/BMP28x digital pressure sensors
 
 Required properties:
-- compatible: bosch,bmp085
+- compatible: must be one of:
+  "bosch,bmp085"
+  "bosch,bmp180"
+  "bosch,bmp280"
+  "bosch,bme280"
 
 Optional properties:
 - chip-id: configurable chip id for non-default chip revisions
@@ -10,6 +14,10 @@ Optional properties:
   value range is 0-3 with rising sensitivity.
 - interrupt-parent: should be the phandle for the interrupt controller
 - interrupts: interrupt mapping for IRQ
+- reset-gpios: a GPIO line handling reset of the sensor: as the line is
+  active low, it should be marked GPIO_ACTIVE_LOW (see gpio/gpio.txt)
+- vddd-supply: digital voltage regulator (see regulator/regulator.txt)
+- vdda-supply: analog voltage regulator (see regulator/regulator.txt)
 
 Example:
 
@@ -21,4 +29,7 @@ pressure@77 {
 	default-oversampling = <2>;
 	interrupt-parent = <&gpio0>;
 	interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+	reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+	vddd-supply = <&foo>;
+	vdda-supply = <&bar>;
 };