summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2024-03-14 20:58:27 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2024-03-14 20:58:27 +0300
commit705c1da8fa4816fb0159b5602fef1df5946a3ee2 (patch)
treebd0451af668ea18edff38f6a8e33fbc2097e3e16 /Documentation
parent66fd6d0bd7572fcb7859ebd4dbfb133881e1cd66 (diff)
parentaabf7173cdfed20ba8677548b601ee6d966712aa (diff)
downloadlinux-705c1da8fa4816fb0159b5602fef1df5946a3ee2.tar.xz
Merge tag 'pci-v6.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas: "Enumeration: - Consolidate interrupt related code in irq.c (Ilpo Järvinen) - Reduce kernel size by replacing sysfs resource macros with functions (Ilpo Järvinen) - Reduce kernel size by compiling sysfs support only when CONFIG_SYSFS=y (Lukas Wunner) - Avoid using Extended Tags on 3ware-9650SE Root Port to work around an apparent hardware defect (Jörg Wedekind) Resource management: - Fix an MMIO mapping leak in pci_iounmap() (Philipp Stanner) - Move pci_iomap.c and other PCI-specific devres code to drivers/pci (Philipp Stanner) - Consolidate PCI devres code in devres.c (Philipp Stanner) Power management: - Avoid D3cold on Asus B1400 PCI-NVMe bridge, where firmware doesn't know how to return correctly to D0, and remove previous quirk that wasn't as specific (Daniel Drake) - Allow runtime PM when the driver enables it but doesn't need any runtime PM callbacks (Raag Jadav) - Drain runtime-idle callbacks before driver removal to avoid races between .remove() and .runtime_idle(), which caused intermittent page faults when the rtsx .runtime_idle() accessed registers that its .remove() had already unmapped (Rafael J. Wysocki) Virtualization: - Avoid Secondary Bus Reset on LSI FW643 so it can be assigned to VMs with VFIO, e.g., for professional audio software on many Apple machines, at the cost of leaking state between VMs (Edmund Raile) Error handling: - Print all logged TLP Prefixes, not just the first, after AER or DPC errors (Ilpo Järvinen) - Quirk the DPC PIO log size for Intel Raptor Lake Root Ports, which still don't advertise a legal size (Paul Menzel) - Ignore expected DPC Surprise Down errors on hot removal (Smita Koralahalli) - Block runtime suspend while handling AER errors to avoid races that prevent the device form being resumed from D3hot (Stanislaw Gruszka) Peer-to-peer DMA: - Use atomic XA allocation in RCU read section (Christophe JAILLET) ASPM: - Collect bits of ASPM-related code that we need even without CONFIG_PCIEASPM into aspm.c (David E. Box) - Save/restore L1 PM Substates config for suspend/resume (David E. Box) - Update save_save when ASPM config is changed, so a .slot_reset() during error recovery restores the changed config, not the .probe()-time config (Vidya Sagar) Endpoint framework: - Refactor and improve pci_epf_alloc_space() API (Niklas Cassel) - Clean up endpoint BAR descriptions (Niklas Cassel) - Fix ntb_register_device() name leak in error path (Yang Yingliang) - Return actual error code for pci_vntb_probe() failure (Yang Yingliang) Broadcom STB PCIe controller driver: - Fix MDIO write polling, which previously never waited for completion (Jonathan Bell) Cadence PCIe endpoint driver: - Clear the ARI "Next Function Number" of last function (Jasko-EXT Wojciech) Freescale i.MX6 PCIe controller driver: - Simplify by replacing switch statements with function pointers for different hardware variants (Frank Li) - Simplify by using clk_bulk*() API (Frank Li) - Remove redundant DT clock and reg/reg-name details (Frank Li) - Add i.MX95 DT and driver support for both Root Complex and Endpoint mode (Frank Li) Microsoft Hyper-V host bridge driver: - Reduce memory usage by limiting ring buffer size to 16KB instead of 4 pages (Michael Kelley) Qualcomm PCIe controller driver: - Add X1E80100 DT and driver support (Abel Vesa) - Add DT 'required-opps' for SoCs that require a minimum performance level (Johan Hovold) - Make DT 'msi-map-mask' optional, depending on how MSI interrupts are mapped (Johan Hovold) - Disable ASPM L0s for sc8280xp, sa8540p and sa8295p because the PHY configuration isn't tuned correctly for L0s (Johan Hovold) - Split dt-binding qcom,pcie.yaml into qcom,pcie-common.yaml and separate files for SA8775p, SC7280, SC8180X, SC8280XP, SM8150, SM8250, SM8350, SM8450, SM8550 for easier reviewing (Krzysztof Kozlowski) - Enable BDF to SID translation by disabling bypass mode (Manivannan Sadhasivam) - Add endpoint MHI support for Snapdragon SA8775P SoC (Mrinmay Sarkar) Synopsys DesignWare PCIe controller driver: - Allocate 64-bit MSI address if no 32-bit address is available (Ajay Agarwal) - Fix endpoint Resizable BAR to actually advertise the required 1MB size (Niklas Cassel) MicroSemi Switchtec management driver: - Release resources if the .probe() fails (Christophe JAILLET) Miscellaneous: - Make pcie_port_bus_type const (Ricardo B. Marliere)" * tag 'pci-v6.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (77 commits) PCI/ASPM: Update save_state when configuration changes PCI/ASPM: Disable L1 before configuring L1 Substates PCI/ASPM: Call pci_save_ltr_state() from pci_save_pcie_state() PCI/ASPM: Save L1 PM Substates Capability for suspend/resume PCI: hv: Fix ring buffer size calculation PCI: dwc: endpoint: Fix advertised resizable BAR size PCI: cadence: Clear the ARI Capability Next Function Number of the last function PCI: dwc: Strengthen the MSI address allocation logic PCI: brcmstb: Fix broken brcm_pcie_mdio_write() polling PCI: qcom: Add X1E80100 PCIe support dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller PCI: qcom: Enable BDF to SID translation properly PCI/AER: Generalize TLP Header Log reading PCI/AER: Use explicit register size for PCI_ERR_CAP PCI: qcom: Disable ASPM L0s for sc8280xp, sa8540p and sa8295p dt-bindings: PCI: qcom: Do not require 'msi-map-mask' dt-bindings: PCI: qcom: Allow 'required-opps' PCI/AER: Block runtime suspend when handling errors PCI/ASPM: Move pci_save_ltr_state() to aspm.c PCI/ASPM: Always build aspm.c ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats18
-rw-r--r--Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml17
-rw-r--r--Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml46
-rw-r--r--Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml49
-rw-r--r--Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml100
-rw-r--r--Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml166
-rw-r--r--Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml166
-rw-r--r--Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml170
-rw-r--r--Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml180
-rw-r--r--Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml158
-rw-r--r--Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml173
-rw-r--r--Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml184
-rw-r--r--Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml178
-rw-r--r--Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml171
-rw-r--r--Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml165
-rw-r--r--Documentation/devicetree/bindings/pci/qcom,pcie.yaml378
-rw-r--r--Documentation/driver-api/device-io.rst3
-rw-r--r--Documentation/driver-api/pci/pci.rst6
18 files changed, 1907 insertions, 421 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats b/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
index 860db53037a5..d1f67bb81d5d 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
+++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
@@ -11,7 +11,7 @@ saw any problems).
What: /sys/bus/pci/devices/<dev>/aer_dev_correctable
Date: July 2018
-KernelVersion: 4.19.0
+KernelVersion: 4.19.0
Contact: linux-pci@vger.kernel.org, rajatja@google.com
Description: List of correctable errors seen and reported by this
PCI device using ERR_COR. Note that since multiple errors may
@@ -32,7 +32,7 @@ Description: List of correctable errors seen and reported by this
What: /sys/bus/pci/devices/<dev>/aer_dev_fatal
Date: July 2018
-KernelVersion: 4.19.0
+KernelVersion: 4.19.0
Contact: linux-pci@vger.kernel.org, rajatja@google.com
Description: List of uncorrectable fatal errors seen and reported by this
PCI device using ERR_FATAL. Note that since multiple errors may
@@ -62,7 +62,7 @@ Description: List of uncorrectable fatal errors seen and reported by this
What: /sys/bus/pci/devices/<dev>/aer_dev_nonfatal
Date: July 2018
-KernelVersion: 4.19.0
+KernelVersion: 4.19.0
Contact: linux-pci@vger.kernel.org, rajatja@google.com
Description: List of uncorrectable nonfatal errors seen and reported by this
PCI device using ERR_NONFATAL. Note that since multiple errors
@@ -100,20 +100,20 @@ collectors) that are AER capable. These indicate the number of error messages as
device, so these counters include them and are thus cumulative of all the error
messages on the PCI hierarchy originating at that root port.
-What: /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_cor
+What: /sys/bus/pci/devices/<dev>/aer_rootport_total_err_cor
Date: July 2018
-KernelVersion: 4.19.0
+KernelVersion: 4.19.0
Contact: linux-pci@vger.kernel.org, rajatja@google.com
Description: Total number of ERR_COR messages reported to rootport.
-What: /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_fatal
+What: /sys/bus/pci/devices/<dev>/aer_rootport_total_err_fatal
Date: July 2018
-KernelVersion: 4.19.0
+KernelVersion: 4.19.0
Contact: linux-pci@vger.kernel.org, rajatja@google.com
Description: Total number of ERR_FATAL messages reported to rootport.
-What: /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_nonfatal
+What: /sys/bus/pci/devices/<dev>/aer_rootport_total_err_nonfatal
Date: July 2018
-KernelVersion: 4.19.0
+KernelVersion: 4.19.0
Contact: linux-pci@vger.kernel.org, rajatja@google.com
Description: Total number of ERR_NONFATAL messages reported to rootport.
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
index d91b639ae7ae..a8b34f58f8f4 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
@@ -150,22 +150,6 @@ allOf:
- {}
- const: pcie_phy
- const: pcie_aux
- - if:
- properties:
- compatible:
- not:
- contains:
- enum:
- - fsl,imx6sx-pcie
- - fsl,imx8mq-pcie
- - fsl,imx6sx-pcie-ep
- - fsl,imx8mq-pcie-ep
- then:
- properties:
- clocks:
- maxItems: 3
- clock-names:
- maxItems: 3
- if:
properties:
@@ -223,6 +207,7 @@ allOf:
- fsl,imx6sx-pcie
- fsl,imx6q-pcie
- fsl,imx6qp-pcie
+ - fsl,imx95-pcie
- fsl,imx6sx-pcie-ep
- fsl,imx6q-pcie-ep
- fsl,imx6qp-pcie-ep
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
index ee155ed5f181..a06f75df8458 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
@@ -22,14 +22,7 @@ properties:
- fsl,imx8mm-pcie-ep
- fsl,imx8mq-pcie-ep
- fsl,imx8mp-pcie-ep
-
- reg:
- minItems: 2
-
- reg-names:
- items:
- - const: dbi
- - const: addr_space
+ - fsl,imx95-pcie-ep
clocks:
minItems: 3
@@ -66,7 +59,44 @@ allOf:
properties:
compatible:
enum:
+ - fsl,imx8mm-pcie-ep
+ - fsl,imx8mq-pcie-ep
+ - fsl,imx8mp-pcie-ep
+ then:
+ properties:
+ reg:
+ minItems: 2
+ maxItems: 2
+ reg-names:
+ items:
+ - const: dbi
+ - const: addr_space
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - fsl,imx95-pcie-ep
+ then:
+ properties:
+ reg:
+ minItems: 6
+ maxItems: 6
+ reg-names:
+ items:
+ - const: dbi
+ - const: atu
+ - const: dbi2
+ - const: app
+ - const: dma
+ - const: addr_space
+
+ - if:
+ properties:
+ compatible:
+ enum:
- fsl,imx8mq-pcie-ep
+ - fsl,imx95-pcie-ep
then:
properties:
clocks:
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
index 81bbb8728f0f..8b8d77b1154b 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
@@ -29,16 +29,7 @@ properties:
- fsl,imx8mq-pcie
- fsl,imx8mm-pcie
- fsl,imx8mp-pcie
-
- reg:
- items:
- - description: Data Bus Interface (DBI) registers.
- - description: PCIe configuration space region.
-
- reg-names:
- items:
- - const: dbi
- - const: config
+ - fsl,imx95-pcie
clocks:
minItems: 3
@@ -94,6 +85,43 @@ allOf:
properties:
compatible:
enum:
+ - fsl,imx6q-pcie
+ - fsl,imx6sx-pcie
+ - fsl,imx6qp-pcie
+ - fsl,imx7d-pcie
+ - fsl,imx8mq-pcie
+ - fsl,imx8mm-pcie
+ - fsl,imx8mp-pcie
+ then:
+ properties:
+ reg:
+ maxItems: 2
+ reg-names:
+ items:
+ - const: dbi
+ - const: config
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - fsl,imx95-pcie
+ then:
+ properties:
+ reg:
+ minItems: 4
+ maxItems: 4
+ reg-names:
+ items:
+ - const: dbi
+ - const: config
+ - const: atu
+ - const: app
+
+ - if:
+ properties:
+ compatible:
+ enum:
- fsl,imx6sx-pcie
then:
properties:
@@ -111,6 +139,7 @@ allOf:
compatible:
enum:
- fsl,imx8mq-pcie
+ - fsl,imx95-pcie
then:
properties:
clocks:
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml
new file mode 100644
index 000000000000..0d1b23523f62
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PCI Express Root Complex Common Properties
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+properties:
+ reg:
+ minItems: 4
+ maxItems: 6
+
+ reg-names:
+ minItems: 4
+ maxItems: 6
+
+ interrupts:
+ minItems: 1
+ maxItems: 8
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 8
+
+ iommu-map:
+ minItems: 1
+ maxItems: 16
+
+ clocks:
+ minItems: 3
+ maxItems: 13
+
+ clock-names:
+ minItems: 3
+ maxItems: 13
+
+ dma-coherent: true
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ items:
+ - const: pcie-mem
+ - const: cpu-pcie
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ items:
+ - const: pciephy
+
+ power-domains:
+ maxItems: 1
+
+ required-opps:
+ maxItems: 1
+
+ resets:
+ minItems: 1
+ maxItems: 12
+
+ reset-names:
+ minItems: 1
+ maxItems: 12
+
+ perst-gpios:
+ description: GPIO controlled connection to PERST# signal
+ maxItems: 1
+
+ wake-gpios:
+ description: GPIO controlled connection to WAKE# signal
+ maxItems: 1
+
+required:
+ - reg
+ - reg-names
+ - interrupt-map-mask
+ - interrupt-map
+ - clocks
+ - clock-names
+
+anyOf:
+ - required:
+ - interrupts
+ - interrupt-names
+ - "#interrupt-cells"
+ - required:
+ - msi-map
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml
new file mode 100644
index 000000000000..efde49d1bef8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sa8775p.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SA8775p PCI Express Root Complex
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+ Qualcomm SA8775p SoC PCIe root complex controller is based on the Synopsys
+ DesignWare PCIe IP.
+
+properties:
+ compatible:
+ const: qcom,pcie-sa8775p
+
+ reg:
+ minItems: 6
+ maxItems: 6
+
+ reg-names:
+ items:
+ - const: parf # Qualcomm specific registers
+ - const: dbi # DesignWare PCIe registers
+ - const: elbi # External local bus interface registers
+ - const: atu # ATU address space
+ - const: config # PCIe configuration space
+ - const: mhi # MHI registers
+
+ clocks:
+ minItems: 5
+ maxItems: 5
+
+ clock-names:
+ items:
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+
+ interrupts:
+ minItems: 8
+ maxItems: 8
+
+ interrupt-names:
+ items:
+ - const: msi0
+ - const: msi1
+ - const: msi2
+ - const: msi3
+ - const: msi4
+ - const: msi5
+ - const: msi6
+ - const: msi7
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: pci
+
+required:
+ - interconnects
+ - interconnect-names
+
+allOf:
+ - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@1c00000 {
+ compatible = "qcom,pcie-sa8775p";
+ reg = <0x0 0x01c00000 0x0 0x3000>,
+ <0x0 0x40000000 0x0 0xf20>,
+ <0x0 0x40000f20 0x0 0xa8>,
+ <0x0 0x40001000 0x0 0x4000>,
+ <0x0 0x40100000 0x0 0x100000>,
+ <0x0 0x01c03000 0x0 0x1000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+ ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+ <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ num-lanes = <2>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
+ clock-names = "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a";
+
+ dma-coherent;
+
+ interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>;
+
+ interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>;
+ interconnect-names = "pcie-mem", "cpu-pcie";
+
+ iommu-map = <0x0 &pcie_smmu 0x0000 0x1>,
+ <0x100 &pcie_smmu 0x0001 0x1>;
+
+ phys = <&pcie0_phy>;
+ phy-names = "pciephy";
+
+ power-domains = <&gcc PCIE_0_GDSC>;
+
+ resets = <&gcc GCC_PCIE_0_BCR>;
+ reset-names = "pci";
+
+ perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml
new file mode 100644
index 000000000000..634da24ec3ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sc7280.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7280 PCI Express Root Complex
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+ Qualcomm SC7280 SoC PCIe root complex controller is based on the Synopsys
+ DesignWare PCIe IP.
+
+properties:
+ compatible:
+ const: qcom,pcie-sc7280
+
+ reg:
+ minItems: 5
+ maxItems: 6
+
+ reg-names:
+ minItems: 5
+ items:
+ - const: parf # Qualcomm specific registers
+ - const: dbi # DesignWare PCIe registers
+ - const: elbi # External local bus interface registers
+ - const: atu # ATU address space
+ - const: config # PCIe configuration space
+ - const: mhi # MHI registers
+
+ clocks:
+ minItems: 13
+ maxItems: 13
+
+ clock-names:
+ items:
+ - const: pipe # PIPE clock
+ - const: pipe_mux # PIPE MUX
+ - const: phy_pipe # PIPE output clock
+ - const: ref # REFERENCE clock
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+ - const: tbu # PCIe TBU clock
+ - const: ddrss_sf_tbu # PCIe SF TBU clock
+ - const: aggre0 # Aggre NoC PCIe CENTER SF AXI clock
+ - const: aggre1 # Aggre NoC PCIe1 AXI clock
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ items:
+ - const: msi
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: pci
+
+ vddpe-3v3-supply:
+ description: PCIe endpoint power supply
+
+allOf:
+ - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@1c08000 {
+ compatible = "qcom,pcie-sc7280";
+ reg = <0 0x01c08000 0 0x3000>,
+ <0 0x40000000 0 0xf1d>,
+ <0 0x40000f20 0 0xa8>,
+ <0 0x40001000 0 0x1000>,
+ <0 0x40100000 0 0x100000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config";
+ ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+ <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ linux,pci-domain = <1>;
+ num-lanes = <2>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+ <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
+ <&pcie1_phy>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_PCIE_1_AUX_CLK>,
+ <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+ <&gcc GCC_DDRSS_PCIE_SF_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_CENTER_SF_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
+
+ clock-names = "pipe",
+ "pipe_mux",
+ "phy_pipe",
+ "ref",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "tbu",
+ "ddrss_sf_tbu",
+ "aggre0",
+ "aggre1";
+
+ dma-coherent;
+
+ interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>;
+
+ iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
+ <0x100 &apps_smmu 0x1c81 0x1>;
+
+ phys = <&pcie1_phy>;
+ phy-names = "pciephy";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie1_clkreq_n>;
+
+ power-domains = <&gcc GCC_PCIE_1_GDSC>;
+
+ resets = <&gcc GCC_PCIE_1_BCR>;
+ reset-names = "pci";
+
+ perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+ vddpe-3v3-supply = <&pp3300_ssd>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml
new file mode 100644
index 000000000000..baf1813ec0ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sc8180x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8180x PCI Express Root Complex
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+ Qualcomm SC8180x SoC PCIe root complex controller is based on the Synopsys
+ DesignWare PCIe IP.
+
+properties:
+ compatible:
+ const: qcom,pcie-sc8180x
+
+ reg:
+ minItems: 5
+ maxItems: 6
+
+ reg-names:
+ minItems: 5
+ items:
+ - const: parf # Qualcomm specific registers
+ - const: dbi # DesignWare PCIe registers
+ - const: elbi # External local bus interface registers
+ - const: atu # ATU address space
+ - const: config # PCIe configuration space
+ - const: mhi # MHI registers
+
+ clocks:
+ minItems: 8
+ maxItems: 8
+
+ clock-names:
+ items:
+ - const: pipe # PIPE clock
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+ - const: ref # REFERENCE clock
+ - const: tbu # PCIe TBU clock
+
+ interrupts:
+ minItems: 8
+ maxItems: 8
+
+ interrupt-names:
+ items:
+ - const: msi0
+ - const: msi1
+ - const: msi2
+ - const: msi3
+ - const: msi4
+ - const: msi5
+ - const: msi6
+ - const: msi7
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: pci
+
+allOf:
+ - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sc8180x.h>
+ #include <dt-bindings/interconnect/qcom,sc8180x.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@1c00000 {
+ compatible = "qcom,pcie-sc8180x";
+ reg = <0 0x01c00000 0 0x3000>,
+ <0 0x60000000 0 0xf1d>,
+ <0 0x60000f20 0 0xa8>,
+ <0 0x60001000 0 0x1000>,
+ <0 0x60100000 0 0x100000>;
+ reg-names = "parf",
+ "dbi",
+ "elbi",
+ "atu",
+ "config";
+ ranges = <0x01000000 0x0 0x60200000 0x0 0x60200000 0x0 0x100000>,
+ <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ num-lanes = <2>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+ <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_PCIE_0_CLKREF_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+ clock-names = "pipe",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "ref",
+ "tbu";
+
+ dma-coherent;
+
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ interconnects = <&aggre2_noc MASTER_PCIE 0 &mc_virt SLAVE_EBI_CH0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
+ interconnect-names = "pcie-mem", "cpu-pcie";
+
+ iommu-map = <0x0 &apps_smmu 0x1d80 0x1>,
+ <0x100 &apps_smmu 0x1d81 0x1>;
+
+ phys = <&pcie0_phy>;
+ phy-names = "pciephy";
+
+ power-domains = <&gcc PCIE_0_GDSC>;
+
+ resets = <&gcc GCC_PCIE_0_BCR>;
+ reset-names = "pci";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml
new file mode 100644
index 000000000000..25c9f13ae977
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sc8280xp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8280XP PCI Express Root Complex
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+ Qualcomm SC8280XP SoC PCIe root complex controller is based on the Synopsys
+ DesignWare PCIe IP.
+
+properties:
+ compatible:
+ enum:
+ - qcom,pcie-sa8540p
+ - qcom,pcie-sc8280xp
+
+ reg:
+ minItems: 5
+ maxItems: 6
+
+ reg-names:
+ minItems: 5
+ items:
+ - const: parf # Qualcomm specific registers
+ - const: dbi # DesignWare PCIe registers
+ - const: elbi # External local bus interface registers
+ - const: atu # ATU address space
+ - const: config # PCIe configuration space
+ - const: mhi # MHI registers
+
+ clocks:
+ minItems: 8
+ maxItems: 9
+
+ clock-names:
+ minItems: 8
+ items:
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+ - const: ddrss_sf_tbu # PCIe SF TBU clock
+ - const: noc_aggr_4 # NoC aggregate 4 clock
+ - const: noc_aggr_south_sf # NoC aggregate South SF clock
+ - const: cnoc_qx # Configuration NoC QX clock
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: pci
+
+ vddpe-3v3-supply:
+ description: A phandle to the PCIe endpoint power supply
+
+required:
+ - interconnects
+ - interconnect-names
+
+allOf:
+ - $ref: qcom,pcie-common.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pcie-sc8280xp
+ then:
+ properties:
+ interrupts:
+ minItems: 4
+ maxItems: 4
+ interrupt-names:
+ items:
+ - const: msi0
+ - const: msi1
+ - const: msi2
+ - const: msi3
+ else:
+ properties:
+ interrupts:
+ maxItems: 1
+ interrupt-names:
+ items:
+ - const: msi
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interconnect/qcom,sc8280xp.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@1c20000 {
+ compatible = "qcom,pcie-sc8280xp";
+ reg = <0x0 0x01c20000 0x0 0x3000>,
+ <0x0 0x3c000000 0x0 0xf1d>,
+ <0x0 0x3c000f20 0x0 0xa8>,
+ <0x0 0x3c001000 0x0 0x1000>,
+ <0x0 0x3c100000 0x0 0x100000>,
+ <0x0 0x01c23000 0x0 0x1000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+ ranges = <0x01000000 0x0 0x00000000 0x0 0x3c200000 0x0 0x100000>,
+ <0x02000000 0x0 0x3c300000 0x0 0x3c300000 0x0 0x1d00000>;
+
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ linux,pci-domain = <2>;
+ num-lanes = <4>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ assigned-clocks = <&gcc GCC_PCIE_2A_AUX_CLK>;
+ assigned-clock-rates = <19200000>;
+ clocks = <&gcc GCC_PCIE_2A_AUX_CLK>,
+ <&gcc GCC_PCIE_2A_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_2A_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_2A_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_2A_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>;
+ clock-names = "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "ddrss_sf_tbu",
+ "noc_aggr_4",
+ "noc_aggr_south_sf";
+
+ dma-coherent;
+
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 525 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0", "msi1", "msi2", "msi3";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 0 GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 0 GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 0 GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>;
+
+ interconnects = <&aggre2_noc MASTER_PCIE_2A 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_2A 0>;
+ interconnect-names = "pcie-mem", "cpu-pcie";
+
+ phys = <&pcie2a_phy>;
+ phy-names = "pciephy";
+
+ pinctrl-0 = <&pcie2a_default>;
+ pinctrl-names = "default";
+
+ power-domains = <&gcc PCIE_2A_GDSC>;
+
+ resets = <&gcc GCC_PCIE_2A_BCR>;
+ reset-names = "pci";
+
+ perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+ vddpe-3v3-supply = <&vreg_nvme>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml
new file mode 100644
index 000000000000..9d569644fda9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8150.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8150 PCI Express Root Complex
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+ Qualcomm SM8150 SoC PCIe root complex controller is based on the Synopsys
+ DesignWare PCIe IP.
+
+properties:
+ compatible:
+ const: qcom,pcie-sm8150
+
+ reg:
+ minItems: 5
+ maxItems: 6
+
+ reg-names:
+ minItems: 5
+ items:
+ - const: parf # Qualcomm specific registers
+ - const: dbi # DesignWare PCIe registers
+ - const: elbi # External local bus interface registers
+ - const: atu # ATU address space
+ - const: config # PCIe configuration space
+ - const: mhi # MHI registers
+
+ clocks:
+ minItems: 8
+ maxItems: 8
+
+ clock-names:
+ items:
+ - const: pipe # PIPE clock
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+ - const: tbu # PCIe TBU clock
+ - const: ref # REFERENCE clock
+
+ interrupts:
+ minItems: 8
+ maxItems: 8
+
+ interrupt-names:
+ items:
+ - const: msi0
+ - const: msi1
+ - const: msi2
+ - const: msi3
+ - const: msi4
+ - const: msi5
+ - const: msi6
+ - const: msi7
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: pci
+
+allOf:
+ - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sm8150.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interconnect/qcom,sm8150.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ pcie@1c00000 {
+ compatible = "qcom,pcie-sm8150";
+ reg = <0 0x01c00000 0 0x3000>,
+ <0 0x60000000 0 0xf1d>,
+ <0 0x60000f20 0 0xa8>,
+ <0 0x60001000 0 0x1000>,
+ <0 0x60100000 0 0x100000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config";
+ ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+ <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ num-lanes = <1>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+ <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "pipe",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "tbu",
+ "ref";
+
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0", "msi1", "msi2", "msi3",
+ "msi4", "msi5", "msi6", "msi7";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ iommu-map = <0x0 &apps_smmu 0x1d80 0x1>,
+ <0x100 &apps_smmu 0x1d81 0x1>;
+
+ phys = <&pcie0_phy>;
+ phy-names = "pciephy";
+
+ pinctrl-0 = <&pcie0_default_state>;
+ pinctrl-names = "default";
+
+ power-domains = <&gcc PCIE_0_GDSC>;
+
+ resets = <&gcc GCC_PCIE_0_BCR>;
+ reset-names = "pci";
+
+ perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+ wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml
new file mode 100644
index 000000000000..4d060bce6f9d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8250 PCI Express Root Complex
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+ Qualcomm SM8250 SoC PCIe root complex controller is based on the Synopsys
+ DesignWare PCIe IP.
+
+properties:
+ compatible:
+ const: qcom,pcie-sm8250
+
+ reg:
+ minItems: 5
+ maxItems: 6
+
+ reg-names:
+ minItems: 5
+ items:
+ - const: parf # Qualcomm specific registers
+ - const: dbi # DesignWare PCIe registers
+ - const: elbi # External local bus interface registers
+ - const: atu # ATU address space
+ - const: config # PCIe configuration space
+ - const: mhi # MHI registers
+
+ clocks:
+ minItems: 8
+ maxItems: 9
+
+ clock-names:
+ # Unfortunately the "optional" ref clock is used in the middle of the list
+ oneOf:
+ - items:
+ - const: pipe # PIPE clock
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+ - const: ref # REFERENCE clock
+ - const: tbu # PCIe TBU clock
+ - const: ddrss_sf_tbu # PCIe SF TBU clock
+ - items:
+ - const: pipe # PIPE clock
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+ - const: tbu # PCIe TBU clock
+ - const: ddrss_sf_tbu # PCIe SF TBU clock
+
+ interrupts:
+ minItems: 8
+ maxItems: 8
+
+ interrupt-names:
+ items:
+ - const: msi0
+ - const: msi1
+ - const: msi2
+ - const: msi3
+ - const: msi4
+ - const: msi5
+ - const: msi6
+ - const: msi7
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: pci
+
+allOf:
+ - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interconnect/qcom,sm8250.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@1c00000 {
+ compatible = "qcom,pcie-sm8250";
+ reg = <0 0x01c00000 0 0x3000>,
+ <0 0x60000000 0 0xf1d>,
+ <0 0x60000f20 0 0xa8>,
+ <0 0x60001000 0 0x1000>,
+ <0 0x60100000 0 0x100000>,
+ <0 0x01c03000 0 0x1000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+ ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+ <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ num-lanes = <1>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+ <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+ <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>;
+ clock-names = "pipe",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "tbu",
+ "ddrss_sf_tbu";
+
+ dma-coherent;
+
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0", "msi1", "msi2", "msi3",
+ "msi4", "msi5", "msi6", "msi7";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ iommu-map = <0x0 &apps_smmu 0x1c00 0x1>,
+ <0x100 &apps_smmu 0x1c01 0x1>;
+
+ phys = <&pcie0_phy>;
+ phy-names = "pciephy";
+
+ pinctrl-0 = <&pcie0_default_state>;
+ pinctrl-names = "default";
+
+ power-domains = <&gcc PCIE_0_GDSC>;
+
+ resets = <&gcc GCC_PCIE_0_BCR>;
+ reset-names = "pci";
+
+ perst-gpios = <&tlmm 79 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml
new file mode 100644
index 000000000000..9eb6e457b07f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8350.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8350 PCI Express Root Complex
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+ Qualcomm SM8350 SoC PCIe root complex controller is based on the Synopsys
+ DesignWare PCIe IP.
+
+properties:
+ compatible:
+ const: qcom,pcie-sm8350
+
+ reg:
+ minItems: 5
+ maxItems: 6
+
+ reg-names:
+ minItems: 5
+ items:
+ - const: parf # Qualcomm specific registers
+ - const: dbi # DesignWare PCIe registers
+ - const: elbi # External local bus interface registers
+ - const: atu # ATU address space
+ - const: config # PCIe configuration space
+ - const: mhi # MHI registers
+
+ clocks:
+ minItems: 8
+ maxItems: 9
+
+ clock-names:
+ minItems: 8
+ items:
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+ - const: tbu # PCIe TBU clock
+ - const: ddrss_sf_tbu # PCIe SF TBU clock
+ - const: aggre1 # Aggre NoC PCIe1 AXI clock
+ - const: aggre0 # Aggre NoC PCIe0 AXI clock
+
+ interrupts:
+ minItems: 8
+ maxItems: 8
+
+ interrupt-names:
+ items:
+ - const: msi0
+ - const: msi1
+ - const: msi2
+ - const: msi3
+ - const: msi4
+ - const: msi5
+ - const: msi6
+ - const: msi7
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: pci
+
+oneOf:
+ - properties:
+ interrupts:
+ maxItems: 1
+ interrupt-names:
+ items:
+ - const: msi
+
+ - properties:
+ interrupts:
+ minItems: 8
+ interrupt-names:
+ items:
+ - const: msi0
+ - const: msi1
+ - const: msi2
+ - const: msi3
+ - const: msi4
+ - const: msi5
+ - const: msi6
+ - const: msi7
+
+allOf:
+ - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sm8350.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interconnect/qcom,sm8350.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@1c00000 {
+ compatible = "qcom,pcie-sm8350";
+ reg = <0 0x01c00000 0 0x3000>,
+ <0 0x60000000 0 0xf1d>,
+ <0 0x60000f20 0 0xa8>,
+ <0 0x60001000 0 0x1000>,
+ <0 0x60100000 0 0x100000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config";
+ ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+ <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ num-lanes = <1>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+ <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>;
+ clock-names = "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "tbu",
+ "ddrss_sf_tbu",
+ "aggre1",
+ "aggre0";
+
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0", "msi1", "msi2", "msi3",
+ "msi4", "msi5", "msi6", "msi7";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ iommu-map = <0x0 &apps_smmu 0x1c00 0x1>,
+ <0x100 &apps_smmu 0x1c01 0x1>;
+
+ phys = <&pcie0_phy>;
+ phy-names = "pciephy";
+
+ pinctrl-0 = <&pcie0_default_state>;
+ pinctrl-names = "default";
+
+ power-domains = <&gcc PCIE_0_GDSC>;
+
+ resets = <&gcc GCC_PCIE_0_BCR>;
+ reset-names = "pci";
+
+ perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml
new file mode 100644
index 000000000000..1496d6993ab4
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8450.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8450 PCI Express Root Complex
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+ Qualcomm SM8450 SoC PCIe root complex controller is based on the Synopsys
+ DesignWare PCIe IP.
+
+properties:
+ compatible:
+ enum:
+ - qcom,pcie-sm8450-pcie0
+ - qcom,pcie-sm8450-pcie1
+
+ reg:
+ minItems: 5
+ maxItems: 6
+
+ reg-names:
+ minItems: 5
+ items:
+ - const: parf # Qualcomm specific registers
+ - const: dbi # DesignWare PCIe registers
+ - const: elbi # External local bus interface registers
+ - const: atu # ATU address space
+ - const: config # PCIe configuration space
+ - const: mhi # MHI registers
+
+ clocks:
+ minItems: 11
+ maxItems: 12
+
+ clock-names:
+ minItems: 11
+ items:
+ - const: pipe # PIPE clock
+ - const: pipe_mux # PIPE MUX
+ - const: phy_pipe # PIPE output clock
+ - const: ref # REFERENCE clock
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+ - const: ddrss_sf_tbu # PCIe SF TBU clock
+ - enum: [aggre0, aggre1] # Aggre NoC PCIe0/1 AXI clock
+ - const: aggre1 # Aggre NoC PCIe1 AXI clock
+
+ interrupts:
+ minItems: 8
+ maxItems: 8
+
+ interrupt-names:
+ items:
+ - const: msi0
+ - const: msi1
+ - const: msi2
+ - const: msi3
+ - const: msi4
+ - const: msi5
+ - const: msi6
+ - const: msi7
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: pci
+
+allOf:
+ - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interconnect/qcom,sm8450.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@1c00000 {
+ compatible = "qcom,pcie-sm8450-pcie0";
+ reg = <0 0x01c00000 0 0x3000>,
+ <0 0x60000000 0 0xf1d>,
+ <0 0x60000f20 0 0xa8>,
+ <0 0x60001000 0 0x1000>,
+ <0 0x60100000 0 0x100000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config";
+ ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+ <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ max-link-speed = <2>;
+ num-lanes = <1>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+ <&gcc GCC_PCIE_0_PIPE_CLK_SRC>,
+ <&pcie0_phy>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
+ clock-names = "pipe",
+ "pipe_mux",
+ "phy_pipe",
+ "ref",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "ddrss_sf_tbu",
+ "aggre0",
+ "aggre1";
+
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0", "msi1", "msi2", "msi3",
+ "msi4", "msi5", "msi6", "msi7";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ msi-map = <0x0 &gic_its 0x5981 0x1>,
+ <0x100 &gic_its 0x5980 0x1>;
+ msi-map-mask = <0xff00>;
+
+ iommu-map = <0x0 &apps_smmu 0x1c00 0x1>,
+ <0x100 &apps_smmu 0x1c01 0x1>;
+
+ phys = <&pcie0_phy>;
+ phy-names = "pciephy";
+
+ pinctrl-0 = <&pcie0_default_state>;
+ pinctrl-names = "default";
+
+ power-domains = <&gcc PCIE_0_GDSC>;
+
+ resets = <&gcc GCC_PCIE_0_BCR>;
+ reset-names = "pci";
+
+ perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml
new file mode 100644
index 000000000000..24cb38673581
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8550.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8550 PCI Express Root Complex
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+ Qualcomm SM8550 SoC (and compatible) PCIe root complex controller is based on
+ the Synopsys DesignWare PCIe IP.
+
+properties:
+ compatible:
+ oneOf:
+ - const: qcom,pcie-sm8550
+ - items:
+ - enum:
+ - qcom,pcie-sm8650
+ - const: qcom,pcie-sm8550
+
+ reg:
+ minItems: 5
+ maxItems: 6
+
+ reg-names:
+ minItems: 5
+ items:
+ - const: parf # Qualcomm specific registers
+ - const: dbi # DesignWare PCIe registers
+ - const: elbi # External local bus interface registers
+ - const: atu # ATU address space
+ - const: config # PCIe configuration space
+ - const: mhi # MHI registers
+
+ clocks:
+ minItems: 7
+ maxItems: 8
+
+ clock-names:
+ minItems: 7
+ items:
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+ - const: ddrss_sf_tbu # PCIe SF TBU clock
+ - const: noc_aggr # Aggre NoC PCIe AXI clock
+ - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock
+
+ interrupts:
+ minItems: 8
+ maxItems: 8
+
+ interrupt-names:
+ items:
+ - const: msi0
+ - const: msi1
+ - const: msi2
+ - const: msi3
+ - const: msi4
+ - const: msi5
+ - const: msi6
+ - const: msi7
+
+ resets:
+ minItems: 1
+ maxItems: 2
+
+ reset-names:
+ minItems: 1
+ items:
+ - const: pci # PCIe core reset
+ - const: link_down # PCIe link down reset
+
+allOf:
+ - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@1c00000 {
+ compatible = "qcom,pcie-sm8550";
+ reg = <0 0x01c00000 0 0x3000>,
+ <0 0x60000000 0 0xf1d>,
+ <0 0x60000f20 0 0xa8>,
+ <0 0x60001000 0 0x1000>,
+ <0 0x60100000 0 0x100000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config";
+ ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+ <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ num-lanes = <2>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>;
+ clock-names = "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "ddrss_sf_tbu",
+ "noc_aggr";
+
+ dma-coherent;
+
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0", "msi1", "msi2", "msi3",
+ "msi4", "msi5", "msi6", "msi7";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>;
+ interconnect-names = "pcie-mem", "cpu-pcie";
+
+ iommu-map = <0x0 &apps_smmu 0x1400 0x1>,
+ <0x100 &apps_smmu 0x1401 0x1>;
+
+ phys = <&pcie0_phy>;
+ phy-names = "pciephy";
+
+ pinctrl-0 = <&pcie0_default_state>;
+ pinctrl-names = "default";
+
+ power-domains = <&gcc PCIE_0_GDSC>;
+
+ resets = <&gcc GCC_PCIE_0_BCR>;
+ reset-names = "pci";
+
+ perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
new file mode 100644
index 000000000000..1074310a8e7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
@@ -0,0 +1,165 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-x1e80100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm X1E80100 PCI Express Root Complex
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+ Qualcomm X1E80100 SoC (and compatible) PCIe root complex controller is based on
+ the Synopsys DesignWare PCIe IP.
+
+properties:
+ compatible:
+ const: qcom,pcie-x1e80100
+
+ reg:
+ minItems: 5
+ maxItems: 6
+
+ reg-names:
+ minItems: 5
+ items:
+ - const: parf # Qualcomm specific registers
+ - const: dbi # DesignWare PCIe registers
+ - const: elbi # External local bus interface registers
+ - const: atu # ATU address space
+ - const: config # PCIe configuration space
+ - const: mhi # MHI registers
+
+ clocks:
+ minItems: 7
+ maxItems: 7
+
+ clock-names:
+ items:
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+ - const: noc_aggr # Aggre NoC PCIe AXI clock
+ - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock
+
+ interrupts:
+ minItems: 8
+ maxItems: 8
+
+ interrupt-names:
+ items:
+ - const: msi0
+ - const: msi1
+ - const: msi2
+ - const: msi3
+ - const: msi4
+ - const: msi5
+ - const: msi6
+ - const: msi7
+
+ resets:
+ minItems: 1
+ maxItems: 2
+
+ reset-names:
+ minItems: 1
+ items:
+ - const: pci # PCIe core reset
+ - const: link_down # PCIe link down reset
+
+allOf:
+ - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,x1e80100-gcc.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@1c08000 {
+ compatible = "qcom,pcie-x1e80100";
+ reg = <0 0x01c08000 0 0x3000>,
+ <0 0x7c000000 0 0xf1d>,
+ <0 0x7c000f40 0 0xa8>,
+ <0 0x7c001000 0 0x1000>,
+ <0 0x7c100000 0 0x100000>,
+ <0 0x01c0b000 0 0x1000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+ ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+ <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ num-lanes = <2>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
+ <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_4_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_4_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_4_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_CFG_NOC_PCIE_ANOC_NORTH_AHB_CLK>,
+ <&gcc GCC_CNOC_PCIE_NORTH_SF_AXI_CLK>;
+ clock-names = "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "noc_aggr",
+ "cnoc_sf_axi";
+
+ dma-coherent;
+
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0", "msi1", "msi2", "msi3",
+ "msi4", "msi5", "msi6", "msi7";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ interconnects = <&pcie_noc MASTER_PCIE_4 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_4 0>;
+ interconnect-names = "pcie-mem", "cpu-pcie";
+
+ iommu-map = <0x0 &apps_smmu 0x1400 0x1>,
+ <0x100 &apps_smmu 0x1401 0x1>;
+
+ phys = <&pcie4_phy>;
+ phy-names = "pciephy";
+
+ pinctrl-0 = <&pcie0_default_state>;
+ pinctrl-names = "default";
+
+ power-domains = <&gcc GCC_PCIE_4_GDSC>;
+
+ resets = <&gcc GCC_PCIE_4_BCR>;
+ reset-names = "pci";
+
+ perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
index a93ab3b54066..cf9a6910b542 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
@@ -28,23 +28,8 @@ properties:
- qcom,pcie-ipq8074-gen3
- qcom,pcie-msm8996
- qcom,pcie-qcs404
- - qcom,pcie-sa8540p
- - qcom,pcie-sa8775p
- - qcom,pcie-sc7280
- - qcom,pcie-sc8180x
- - qcom,pcie-sc8280xp
- qcom,pcie-sdm845
- qcom,pcie-sdx55
- - qcom,pcie-sm8150
- - qcom,pcie-sm8250
- - qcom,pcie-sm8350
- - qcom,pcie-sm8450-pcie0
- - qcom,pcie-sm8450-pcie1
- - qcom,pcie-sm8550
- - items:
- - enum:
- - qcom,pcie-sm8650
- - const: qcom,pcie-sm8550
- items:
- const: qcom,pcie-msm8998
- const: qcom,pcie-msm8996
@@ -106,9 +91,6 @@ properties:
vdda_refclk-supply:
description: A phandle to the core analog power supply for IC which generates reference clock
- vddpe-3v3-supply:
- description: A phandle to the PCIe endpoint power supply
-
phys:
maxItems: 1
@@ -123,6 +105,9 @@ properties:
description: GPIO controlled connection to PERST# signal
maxItems: 1
+ required-opps:
+ maxItems: 1
+
wake-gpios:
description: GPIO controlled connection to WAKE# signal
maxItems: 1
@@ -143,7 +128,6 @@ anyOf:
- "#interrupt-cells"
- required:
- msi-map
- - msi-map-mask
allOf:
- $ref: /schemas/pci/pci-bus.yaml#
@@ -217,16 +201,7 @@ allOf:
compatible:
contains:
enum:
- - qcom,pcie-sa8775p
- - qcom,pcie-sc7280
- - qcom,pcie-sc8180x
- - qcom,pcie-sc8280xp
- qcom,pcie-sdx55
- - qcom,pcie-sm8250
- - qcom,pcie-sm8350
- - qcom,pcie-sm8450-pcie0
- - qcom,pcie-sm8450-pcie1
- - qcom,pcie-sm8550
then:
properties:
reg:
@@ -456,65 +431,6 @@ allOf:
compatible:
contains:
enum:
- - qcom,pcie-sc7280
- then:
- properties:
- clocks:
- minItems: 13
- maxItems: 13
- clock-names:
- items:
- - const: pipe # PIPE clock
- - const: pipe_mux # PIPE MUX
- - const: phy_pipe # PIPE output clock
- - const: ref # REFERENCE clock
- - const: aux # Auxiliary clock
- - const: cfg # Configuration clock
- - const: bus_master # Master AXI clock
- - const: bus_slave # Slave AXI clock
- - const: slave_q2a # Slave Q2A clock
- - const: tbu # PCIe TBU clock
- - const: ddrss_sf_tbu # PCIe SF TBU clock
- - const: aggre0 # Aggre NoC PCIe CENTER SF AXI clock
- - const: aggre1 # Aggre NoC PCIe1 AXI clock
- resets:
- maxItems: 1
- reset-names:
- items:
- - const: pci # PCIe core reset
-
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,pcie-sc8180x
- then:
- properties:
- clocks:
- minItems: 8
- maxItems: 8
- clock-names:
- items:
- - const: pipe # PIPE clock
- - const: aux # Auxiliary clock
- - const: cfg # Configuration clock
- - const: bus_master # Master AXI clock
- - const: bus_slave # Slave AXI clock
- - const: slave_q2a # Slave Q2A clock
- - const: ref # REFERENCE clock
- - const: tbu # PCIe TBU clock
- resets:
- maxItems: 1
- reset-names:
- items:
- - const: pci # PCIe core reset
-
- - if:
- properties:
- compatible:
- contains:
- enum:
- qcom,pcie-sdm845
then:
oneOf:
@@ -558,229 +474,6 @@ allOf:
compatible:
contains:
enum:
- - qcom,pcie-sm8150
- then:
- properties:
- clocks:
- minItems: 8
- maxItems: 8
- clock-names:
- items:
- - const: pipe # PIPE clock
- - const: aux # Auxiliary clock
- - const: cfg # Configuration clock
- - const: bus_master # Master AXI clock
- - const: bus_slave # Slave AXI clock
- - const: slave_q2a # Slave Q2A clock
- - const: tbu # PCIe TBU clock
- - const: ref # REFERENCE clock
- resets:
- maxItems: 1
- reset-names:
- items:
- - const: pci # PCIe core reset
-
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,pcie-sm8250
- then:
- oneOf:
- # Unfortunately the "optional" ref clock is used in the middle of the list
- - properties:
- clocks:
- minItems: 9
- maxItems: 9
- clock-names:
- items:
- - const: pipe # PIPE clock
- - const: aux # Auxiliary clock
- - const: cfg # Configuration clock
- - const: bus_master # Master AXI clock
- - const: bus_slave # Slave AXI clock
- - const: slave_q2a # Slave Q2A clock
- - const: ref # REFERENCE clock
- - const: tbu # PCIe TBU clock
- - const: ddrss_sf_tbu # PCIe SF TBU clock
- - properties:
- clocks:
- minItems: 8
- maxItems: 8
- clock-names:
- items:
- - const: pipe # PIPE clock
- - const: aux # Auxiliary clock
- - const: cfg # Configuration clock
- - const: bus_master # Master AXI clock
- - const: bus_slave # Slave AXI clock
- - const: slave_q2a # Slave Q2A clock
- - const: tbu # PCIe TBU clock
- - const: ddrss_sf_tbu # PCIe SF TBU clock
- properties:
- resets:
- maxItems: 1
- reset-names:
- items:
- - const: pci # PCIe core reset
-
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,pcie-sm8350
- then:
- properties:
- clocks:
- minItems: 8
- maxItems: 9
- clock-names:
- minItems: 8
- items:
- - const: aux # Auxiliary clock
- - const: cfg # Configuration clock
- - const: bus_master # Master AXI clock
- - const: bus_slave # Slave AXI clock
- - const: slave_q2a # Slave Q2A clock
- - const: tbu # PCIe TBU clock
- - const: ddrss_sf_tbu # PCIe SF TBU clock
- - const: aggre1 # Aggre NoC PCIe1 AXI clock
- - const: aggre0 # Aggre NoC PCIe0 AXI clock
- resets:
- maxItems: 1
- reset-names:
- items:
- - const: pci # PCIe core reset
-
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,pcie-sm8450-pcie0
- then:
- properties:
- clocks:
- minItems: 12
- maxItems: 12
- clock-names:
- items:
- - const: pipe # PIPE clock
- - const: pipe_mux # PIPE MUX
- - const: phy_pipe # PIPE output clock
- - const: ref # REFERENCE clock
- - const: aux # Auxiliary clock
- - const: cfg # Configuration clock
- - const: bus_master # Master AXI clock
- - const: bus_slave # Slave AXI clock
- - const: slave_q2a # Slave Q2A clock
- - const: ddrss_sf_tbu # PCIe SF TBU clock
- - const: aggre0 # Aggre NoC PCIe0 AXI clock
- - const: aggre1 # Aggre NoC PCIe1 AXI clock
- resets:
- maxItems: 1
- reset-names:
- items:
- - const: pci # PCIe core reset
-
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,pcie-sm8450-pcie1
- then:
- properties:
- clocks:
- minItems: 11
- maxItems: 11
- clock-names:
- items:
- - const: pipe # PIPE clock
- - const: pipe_mux # PIPE MUX
- - const: phy_pipe # PIPE output clock
- - const: ref # REFERENCE clock
- - const: aux # Auxiliary clock
- - const: cfg # Configuration clock
- - const: bus_master # Master AXI clock
- - const: bus_slave # Slave AXI clock
- - const: slave_q2a # Slave Q2A clock
- - const: ddrss_sf_tbu # PCIe SF TBU clock
- - const: aggre1 # Aggre NoC PCIe1 AXI clock
- resets:
- maxItems: 1
- reset-names:
- items:
- - const: pci # PCIe core reset
-
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,pcie-sm8550
- then:
- properties:
- clocks:
- minItems: 7
- maxItems: 8
- clock-names:
- minItems: 7
- items:
- - const: aux # Auxiliary clock
- - const: cfg # Configuration clock
- - const: bus_master # Master AXI clock
- - const: bus_slave # Slave AXI clock
- - const: slave_q2a # Slave Q2A clock
- - const: ddrss_sf_tbu # PCIe SF TBU clock
- - const: noc_aggr # Aggre NoC PCIe AXI clock
- - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock
- resets:
- minItems: 1
- maxItems: 2
- reset-names:
- minItems: 1
- items:
- - const: pci # PCIe core reset
- - const: link_down # PCIe link down reset
-
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,pcie-sa8540p
- - qcom,pcie-sc8280xp
- then:
- properties:
- clocks:
- minItems: 8
- maxItems: 9
- clock-names:
- minItems: 8
- items:
- - const: aux # Auxiliary clock
- - const: cfg # Configuration clock
- - const: bus_master # Master AXI clock
- - const: bus_slave # Slave AXI clock
- - const: slave_q2a # Slave Q2A clock
- - const: ddrss_sf_tbu # PCIe SF TBU clock
- - const: noc_aggr_4 # NoC aggregate 4 clock
- - const: noc_aggr_south_sf # NoC aggregate South SF clock
- - const: cnoc_qx # Configuration NoC QX clock
- resets:
- maxItems: 1
- reset-names:
- items:
- - const: pci # PCIe core reset
-
- - if:
- properties:
- compatible:
- contains:
- enum:
- qcom,pcie-sdx55
then:
properties:
@@ -803,43 +496,6 @@ allOf:
- const: pci # PCIe core reset
- if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,pcie-sa8775p
- then:
- properties:
- clocks:
- minItems: 5
- maxItems: 5
- clock-names:
- items:
- - const: aux # Auxiliary clock
- - const: cfg # Configuration clock
- - const: bus_master # Master AXI clock
- - const: bus_slave # Slave AXI clock
- - const: slave_q2a # Slave Q2A clock
- resets:
- maxItems: 1
- reset-names:
- items:
- - const: pci # PCIe core reset
-
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,pcie-sa8540p
- - qcom,pcie-sa8775p
- - qcom,pcie-sc8280xp
- then:
- required:
- - interconnects
- - interconnect-names
-
- - if:
not:
properties:
compatible:
@@ -874,16 +530,7 @@ allOf:
contains:
enum:
- qcom,pcie-msm8996
- - qcom,pcie-sa8775p
- - qcom,pcie-sc7280
- - qcom,pcie-sc8180x
- qcom,pcie-sdm845
- - qcom,pcie-sm8150
- - qcom,pcie-sm8250
- - qcom,pcie-sm8350
- - qcom,pcie-sm8450-pcie0
- - qcom,pcie-sm8450-pcie1
- - qcom,pcie-sm8550
then:
oneOf:
- properties:
@@ -911,24 +558,6 @@ allOf:
compatible:
contains:
enum:
- - qcom,pcie-sc8280xp
- then:
- properties:
- interrupts:
- minItems: 4
- maxItems: 4
- interrupt-names:
- items:
- - const: msi0
- - const: msi1
- - const: msi2
- - const: msi3
-
- - if:
- properties:
- compatible:
- contains:
- enum:
- qcom,pcie-apq8064
- qcom,pcie-apq8084
- qcom,pcie-ipq4019
@@ -938,7 +567,6 @@ allOf:
- qcom,pcie-ipq8074
- qcom,pcie-ipq8074-gen3
- qcom,pcie-qcs404
- - qcom,pcie-sa8540p
then:
properties:
interrupts:
diff --git a/Documentation/driver-api/device-io.rst b/Documentation/driver-api/device-io.rst
index d55384b106bd..5c7e8194bef9 100644
--- a/Documentation/driver-api/device-io.rst
+++ b/Documentation/driver-api/device-io.rst
@@ -517,6 +517,3 @@ Public Functions Provided
.. kernel-doc:: arch/x86/include/asm/io.h
:internal:
-
-.. kernel-doc:: lib/pci_iomap.c
- :export:
diff --git a/Documentation/driver-api/pci/pci.rst b/Documentation/driver-api/pci/pci.rst
index 4843cfad4f60..aa40b1cc243b 100644
--- a/Documentation/driver-api/pci/pci.rst
+++ b/Documentation/driver-api/pci/pci.rst
@@ -4,6 +4,12 @@ PCI Support Library
.. kernel-doc:: drivers/pci/pci.c
:export:
+.. kernel-doc:: drivers/pci/iomap.c
+ :export:
+
+.. kernel-doc:: drivers/pci/devres.c
+ :export:
+
.. kernel-doc:: drivers/pci/pci-driver.c
:export: