summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorMichael Walle <michael@walle.cc>2020-07-02 00:23:48 +0300
committerLee Jones <lee.jones@linaro.org>2020-08-13 09:49:40 +0300
commit7d2594cd1fa0b03b2746ce811926ee150a3a14fa (patch)
treed16e46eca336533a90d3f8e6b2789dadd91c4be9 /Documentation
parent44e6171ed04a0cd0378e2503f03a444ebdd4e8e3 (diff)
downloadlinux-7d2594cd1fa0b03b2746ce811926ee150a3a14fa.tar.xz
mfd: smsc-ece1099: Remove driver
This MFD driver has no user. The keypad driver of this device never made it into the kernel. Therefore, this driver is useless. Remove it. Signed-off-by: Michael Walle <michael@walle.cc> Cc: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/driver-api/index.rst1
-rw-r--r--Documentation/driver-api/smsc_ece1099.rst60
2 files changed, 0 insertions, 61 deletions
diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst
index 6567187e7687..1397a30188eb 100644
--- a/Documentation/driver-api/index.rst
+++ b/Documentation/driver-api/index.rst
@@ -98,7 +98,6 @@ available subsections can be seen below.
rfkill
serial/index
sm501
- smsc_ece1099
switchtec
sync_file
vfio-mediated-device
diff --git a/Documentation/driver-api/smsc_ece1099.rst b/Documentation/driver-api/smsc_ece1099.rst
deleted file mode 100644
index 079277421eaf..000000000000
--- a/Documentation/driver-api/smsc_ece1099.rst
+++ /dev/null
@@ -1,60 +0,0 @@
-=================================================
-Msc Keyboard Scan Expansion/GPIO Expansion device
-=================================================
-
-What is smsc-ece1099?
-----------------------
-
-The ECE1099 is a 40-Pin 3.3V Keyboard Scan Expansion
-or GPIO Expansion device. The device supports a keyboard
-scan matrix of 23x8. The device is connected to a Master
-via the SMSC BC-Link interface or via the SMBus.
-Keypad scan Input(KSI) and Keypad Scan Output(KSO) signals
-are multiplexed with GPIOs.
-
-Interrupt generation
---------------------
-
-Interrupts can be generated by an edge detection on a GPIO
-pin or an edge detection on one of the bus interface pins.
-Interrupts can also be detected on the keyboard scan interface.
-The bus interrupt pin (BC_INT# or SMBUS_INT#) is asserted if
-any bit in one of the Interrupt Status registers is 1 and
-the corresponding Interrupt Mask bit is also 1.
-
-In order for software to determine which device is the source
-of an interrupt, it should first read the Group Interrupt Status Register
-to determine which Status register group is a source for the interrupt.
-Software should read both the Status register and the associated Mask register,
-then AND the two values together. Bits that are 1 in the result of the AND
-are active interrupts. Software clears an interrupt by writing a 1 to the
-corresponding bit in the Status register.
-
-Communication Protocol
-----------------------
-
-- SMbus slave Interface
- The host processor communicates with the ECE1099 device
- through a series of read/write registers via the SMBus
- interface. SMBus is a serial communication protocol between
- a computer host and its peripheral devices. The SMBus data
- rate is 10KHz minimum to 400 KHz maximum
-
-- Slave Bus Interface
- The ECE1099 device SMBus implementation is a subset of the
- SMBus interface to the host. The device is a slave-only SMBus device.
- The implementation in the device is a subset of SMBus since it
- only supports four protocols.
-
- The Write Byte, Read Byte, Send Byte, and Receive Byte protocols are the
- only valid SMBus protocols for the device.
-
-- BC-LinkTM Interface
- The BC-Link is a proprietary bus that allows communication
- between a Master device and a Companion device. The Master
- device uses this serial bus to read and write registers
- located on the Companion device. The bus comprises three signals,
- BC_CLK, BC_DAT and BC_INT#. The Master device always provides the
- clock, BC_CLK, and the Companion device is the source for an
- independent asynchronous interrupt signal, BC_INT#. The ECE1099
- supports BC-Link speeds up to 24MHz.