summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorJakub Kicinski <kuba@kernel.org>2021-12-24 03:09:58 +0300
committerJakub Kicinski <kuba@kernel.org>2021-12-24 03:09:58 +0300
commit8b3f91332291fa280a56215f5189baca185998f5 (patch)
treeb89f58972c80ffacf57c4c9cedb5b4b03473c5be /Documentation
parentf2b551fad8d8f2ac5e1f810ad595298381e0b0c5 (diff)
parent391e5975c0208ce3739587b33eba08be3e473d79 (diff)
downloadlinux-8b3f91332291fa280a56215f5189baca185998f5.tar.xz
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
include/net/sock.h commit 8f905c0e7354 ("inet: fully convert sk->sk_rx_dst to RCU rules") commit 43f51df41729 ("net: move early demux fields close to sk_refcnt") https://lore.kernel.org/all/20211222141641.0caa0ab3@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/networking/bonding.rst11
-rw-r--r--Documentation/networking/device_drivers/ethernet/freescale/dpaa2/overview.rst1
-rw-r--r--Documentation/networking/timestamping.rst4
3 files changed, 9 insertions, 7 deletions
diff --git a/Documentation/networking/bonding.rst b/Documentation/networking/bonding.rst
index e5a07cb48f68..ab98373535ea 100644
--- a/Documentation/networking/bonding.rst
+++ b/Documentation/networking/bonding.rst
@@ -196,11 +196,12 @@ ad_actor_sys_prio
ad_actor_system
In an AD system, this specifies the mac-address for the actor in
- protocol packet exchanges (LACPDUs). The value cannot be NULL or
- multicast. It is preferred to have the local-admin bit set for this
- mac but driver does not enforce it. If the value is not given then
- system defaults to using the masters' mac address as actors' system
- address.
+ protocol packet exchanges (LACPDUs). The value cannot be a multicast
+ address. If the all-zeroes MAC is specified, bonding will internally
+ use the MAC of the bond itself. It is preferred to have the
+ local-admin bit set for this mac but driver does not enforce it. If
+ the value is not given then system defaults to using the masters'
+ mac address as actors' system address.
This parameter has effect only in 802.3ad mode and is available through
SysFs interface.
diff --git a/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/overview.rst b/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/overview.rst
index d638b5a8aadd..199647729251 100644
--- a/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/overview.rst
+++ b/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/overview.rst
@@ -183,6 +183,7 @@ PHY and allows physical transmission and reception of Ethernet frames.
IRQ config, enable, reset
DPNI (Datapath Network Interface)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Contains TX/RX queues, network interface configuration, and RX buffer pool
configuration mechanisms. The TX/RX queues are in memory and are identified
by queue number.
diff --git a/Documentation/networking/timestamping.rst b/Documentation/networking/timestamping.rst
index 80b13353254a..f5809206eb93 100644
--- a/Documentation/networking/timestamping.rst
+++ b/Documentation/networking/timestamping.rst
@@ -582,8 +582,8 @@ Time stamps for outgoing packets are to be generated as follows:
and hardware timestamping is not possible (SKBTX_IN_PROGRESS not set).
- As soon as the driver has sent the packet and/or obtained a
hardware time stamp for it, it passes the time stamp back by
- calling skb_hwtstamp_tx() with the original skb, the raw
- hardware time stamp. skb_hwtstamp_tx() clones the original skb and
+ calling skb_tstamp_tx() with the original skb, the raw
+ hardware time stamp. skb_tstamp_tx() clones the original skb and
adds the timestamps, therefore the original skb has to be freed now.
If obtaining the hardware time stamp somehow fails, then the driver
should not fall back to software time stamping. The rationale is that