summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2021-04-29 00:50:20 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2021-04-29 00:50:20 +0300
commitc05a182bf45681c5529a58c71ce5647535b3ae7a (patch)
treeef015a065cf45597dbd56be2519595e39ce1243a /Documentation
parentfc0586062816559defb14c947319ef8c4c326fb3 (diff)
parente06abcc68cb555377efd5aa781c014d3d68498b6 (diff)
downloadlinux-c05a182bf45681c5529a58c71ce5647535b3ae7a.tar.xz
Merge tag 'for-5.13/libata-2021-04-27' of git://git.kernel.dk/linux-block
Pull libata updates from Jens Axboe: "Mostly cleanups this time, but also a few additions: - kernel-doc cleanups and sanitization (Lee) - Spelling fix (Bhaskar) - Fix ata_qc_from_tag() return value check in dwc_460ex (Dinghao) - Fall-through warning fix (Gustavo) - IRQ registration fixes (Sergey) - Add AHCI support for Tegra186 (Sowjanya) - Add xiling phy support for AHCI (Piyush) - SXS disable fix for AHCI for Hisilicon Kunpeng920 (Xingui) - pata legacy probe mask support (Maciej)" * tag 'for-5.13/libata-2021-04-27' of git://git.kernel.dk/linux-block: (54 commits) libata: Fix fall-through warnings for Clang pata_ipx4xx_cf: Fix unsigned comparison with less than zero ata: ahci_tegra: call tegra_powergate_power_off only when PM domain is not present ata: ahci_tegra: Add AHCI support for Tegra186 dt-binding: ata: tegra: Add dt-binding documentation for Tegra186 dt-bindings: ata: tegra: Convert binding documentation to YAML pata_legacy: Add `probe_mask' parameter like with ide-generic pata_platform: Document `pio_mask' module parameter pata_legacy: Properly document module parameters ata: ahci: ceva: Updated code by using dev_err_probe() ata: ahci: Disable SXS for Hisilicon Kunpeng920 ata: libahci_platform: fix IRQ check sata_mv: add IRQ checks ata: pata_acpi: Fix some incorrect function param descriptions ata: libata-acpi: Fix function name and provide description for 'prev_gtf' ata: sata_mv: Fix misnaming of 'mv_bmdma_stop()' ata: pata_cs5530: Fix misspelling of 'cs5530_init_one()'s 'pdev' param ata: pata_legacy: Repair a couple kernel-doc problems ata: ata_generic: Fix misspelling of 'ata_generic_init_one()' ata: pata_opti: Fix spelling issue of 'val' in 'opti_write_reg()' ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/admin-guide/kernel-parameters.txt90
-rw-r--r--Documentation/devicetree/bindings/ata/ahci-ceva.txt4
-rw-r--r--Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml176
-rw-r--r--Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt44
4 files changed, 270 insertions, 44 deletions
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 74db44ce4d9a..5c949c12ed07 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -3600,6 +3600,96 @@
Currently this function knows 686a and 8231 chips.
Format: [spp|ps2|epp|ecp|ecpepp]
+ pata_legacy.all= [HW,LIBATA]
+ Format: <int>
+ Set to non-zero to probe primary and secondary ISA
+ port ranges on PCI systems where no PCI PATA device
+ has been found at either range. Disabled by default.
+
+ pata_legacy.autospeed= [HW,LIBATA]
+ Format: <int>
+ Set to non-zero if a chip is present that snoops speed
+ changes. Disabled by default.
+
+ pata_legacy.ht6560a= [HW,LIBATA]
+ Format: <int>
+ Set to 1, 2, or 3 for HT 6560A on the primary channel,
+ the secondary channel, or both channels respectively.
+ Disabled by default.
+
+ pata_legacy.ht6560b= [HW,LIBATA]
+ Format: <int>
+ Set to 1, 2, or 3 for HT 6560B on the primary channel,
+ the secondary channel, or both channels respectively.
+ Disabled by default.
+
+ pata_legacy.iordy_mask= [HW,LIBATA]
+ Format: <int>
+ IORDY enable mask. Set individual bits to allow IORDY
+ for the respective channel. Bit 0 is for the first
+ legacy channel handled by this driver, bit 1 is for
+ the second channel, and so on. The sequence will often
+ correspond to the primary legacy channel, the secondary
+ legacy channel, and so on, but the handling of a PCI
+ bus and the use of other driver options may interfere
+ with the sequence. By default IORDY is allowed across
+ all channels.
+
+ pata_legacy.opti82c46x= [HW,LIBATA]
+ Format: <int>
+ Set to 1, 2, or 3 for Opti 82c611A on the primary
+ channel, the secondary channel, or both channels
+ respectively. Disabled by default.
+
+ pata_legacy.opti82c611a= [HW,LIBATA]
+ Format: <int>
+ Set to 1, 2, or 3 for Opti 82c465MV on the primary
+ channel, the secondary channel, or both channels
+ respectively. Disabled by default.
+
+ pata_legacy.pio_mask= [HW,LIBATA]
+ Format: <int>
+ PIO mode mask for autospeed devices. Set individual
+ bits to allow the use of the respective PIO modes.
+ Bit 0 is for mode 0, bit 1 is for mode 1, and so on.
+ All modes allowed by default.
+
+ pata_legacy.probe_all= [HW,LIBATA]
+ Format: <int>
+ Set to non-zero to probe tertiary and further ISA
+ port ranges on PCI systems. Disabled by default.
+
+ pata_legacy.probe_mask= [HW,LIBATA]
+ Format: <int>
+ Probe mask for legacy ISA PATA ports. Depending on
+ platform configuration and the use of other driver
+ options up to 6 legacy ports are supported: 0x1f0,
+ 0x170, 0x1e8, 0x168, 0x1e0, 0x160, however probing
+ of individual ports can be disabled by setting the
+ corresponding bits in the mask to 1. Bit 0 is for
+ the first port in the list above (0x1f0), and so on.
+ By default all supported ports are probed.
+
+ pata_legacy.qdi= [HW,LIBATA]
+ Format: <int>
+ Set to non-zero to probe QDI controllers. By default
+ set to 1 if CONFIG_PATA_QDI_MODULE, 0 otherwise.
+
+ pata_legacy.winbond= [HW,LIBATA]
+ Format: <int>
+ Set to non-zero to probe Winbond controllers. Use
+ the standard I/O port (0x130) if 1, otherwise the
+ value given is the I/O port to use (typically 0x1b0).
+ By default set to 1 if CONFIG_PATA_WINBOND_VLB_MODULE,
+ 0 otherwise.
+
+ pata_platform.pio_mask= [HW,LIBATA]
+ Format: <int>
+ Supported PIO mode mask. Set individual bits to allow
+ the use of the respective PIO modes. Bit 0 is for
+ mode 0, bit 1 is for mode 1, and so on. Mode 0 only
+ allowed by default.
+
pause_on_oops=
Halt all CPUs after the first oops has been printed for
the specified number of seconds. This is to be used if
diff --git a/Documentation/devicetree/bindings/ata/ahci-ceva.txt b/Documentation/devicetree/bindings/ata/ahci-ceva.txt
index 7561cc4de371..bfb6da0281ec 100644
--- a/Documentation/devicetree/bindings/ata/ahci-ceva.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-ceva.txt
@@ -38,6 +38,8 @@ Required properties:
Optional properties:
- ceva,broken-gen2: limit to gen1 speed instead of gen2.
+ - phys: phandle for the PHY device
+ - resets: phandle to the reset controller for the SATA IP
Examples:
ahci@fd0c0000 {
@@ -56,4 +58,6 @@ Examples:
ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
ceva,broken-gen2;
+ phys = <&psgtr 1 PHY_TYPE_SATA 1 1>;
+ resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
};
diff --git a/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml b/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml
new file mode 100644
index 000000000000..a75e9a8f539a
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/nvidia,tegra-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra AHCI SATA Controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jonathan Hunter <jonathanh@nvidia.com>
+
+properties:
+ compatible:
+ enum:
+ - nvidia,tegra124-ahci
+ - nvidia,tegra132-ahci
+ - nvidia,tegra210-ahci
+ - nvidia,tegra186-ahci
+
+ reg:
+ minItems: 2
+ maxItems: 3
+ items:
+ - description: AHCI registers
+ - description: SATA configuration and IPFS registers
+ - description: SATA AUX registers
+
+ interrupts:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: sata
+ - const: sata-oob
+
+ clocks:
+ maxItems: 2
+
+ reset-names:
+ minItems: 2
+ items:
+ - const: sata
+ - const: sata-cold
+ - const: sata-oob
+
+ resets:
+ minItems: 2
+ maxItems: 3
+
+ iommus:
+ maxItems: 1
+
+ interconnect-names:
+ items:
+ - const: dma-mem
+ - const: write
+
+ interconnects:
+ maxItems: 2
+
+ power-domains:
+ items:
+ - description: SAX power-domain
+
+ phy-names:
+ items:
+ - const: sata-0
+
+ phys:
+ maxItems: 1
+
+ hvdd-supply:
+ description: SATA HVDD regulator supply.
+
+ vddio-supply:
+ description: SATA VDDIO regulator supply.
+
+ avdd-supply:
+ description: SATA AVDD regulator supply.
+
+ target-5v-supply:
+ description: SATA 5V power regulator supply.
+
+ target-12v-supply:
+ description: SATA 12V power regulator supply.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clock-names
+ - clocks
+ - reset-names
+ - resets
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra124-ahci
+ - nvidia,tegra132-ahci
+ then:
+ properties:
+ reg:
+ maxItems: 2
+ reset-names:
+ minItems: 3
+ resets:
+ minItems: 3
+ required:
+ - phys
+ - phy-names
+ - hvdd-supply
+ - vddio-supply
+ - avdd-supply
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra210-ahci
+ then:
+ properties:
+ reg:
+ minItems: 3
+ reset-names:
+ minItems: 3
+ resets:
+ minItems: 3
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra186-ahci
+ then:
+ properties:
+ reg:
+ minItems: 3
+ reset-names:
+ maxItems: 2
+ resets:
+ maxItems: 2
+ required:
+ - iommus
+ - interconnect-names
+ - interconnects
+ - power-domains
+
+additionalProperties: true
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra210-car.h>
+ #include <dt-bindings/reset/tegra210-car.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ sata@70020000 {
+ compatible = "nvidia,tegra210-ahci";
+ reg = <0x70027000 0x00002000>, /* AHCI */
+ <0x70020000 0x00007000>, /* SATA */
+ <0x70001100 0x00010000>; /* SATA AUX */
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA210_CLK_SATA>,
+ <&tegra_car TEGRA210_CLK_SATA_OOB>;
+ clock-names = "sata", "sata-oob";
+ resets = <&tegra_car 124>,
+ <&tegra_car 129>,
+ <&tegra_car 123>;
+ reset-names = "sata", "sata-cold", "sata-oob";
+ };
diff --git a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt
deleted file mode 100644
index 12ab2f723eb0..000000000000
--- a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Tegra SoC SATA AHCI controller
-
-Required properties :
-- compatible : Must be one of:
- - Tegra124 : "nvidia,tegra124-ahci"
- - Tegra132 : "nvidia,tegra132-ahci", "nvidia,tegra124-ahci"
- - Tegra210 : "nvidia,tegra210-ahci"
-- reg : Should contain 2 entries:
- - AHCI register set (SATA BAR5)
- - SATA register set
-- interrupts : Defines the interrupt used by SATA
-- clocks : Must contain an entry for each entry in clock-names.
- See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
- - sata
- - sata-oob
-- resets : Must contain an entry for each entry in reset-names.
- See ../reset/reset.txt for details.
-- reset-names : Must include the following entries:
- - sata
- - sata-oob
- - sata-cold
-- phys : Must contain an entry for each entry in phy-names.
- See ../phy/phy-bindings.txt for details.
-- phy-names : Must include the following entries:
- - For Tegra124 and Tegra132:
- - sata-phy : XUSB PADCTL SATA PHY
-- For Tegra124 and Tegra132:
- - hvdd-supply : Defines the SATA HVDD regulator
- - vddio-supply : Defines the SATA VDDIO regulator
- - avdd-supply : Defines the SATA AVDD regulator
- - target-5v-supply : Defines the SATA 5V power regulator
- - target-12v-supply : Defines the SATA 12V power regulator
-
-Optional properties:
-- reg :
- - AUX register set
-- clock-names :
- - cml1 :
- cml1 clock should be defined here if the PHY driver
- doesn't manage them. If it does, they should not be.
-- phy-names :
- - For T210:
- - sata-phy