summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2008-10-11 20:16:54 +0400
committerLinus Torvalds <torvalds@linux-foundation.org>2008-10-11 20:16:54 +0400
commitd3570a5a7b8d0604fa012129f92637dc1534f62c (patch)
tree15d290595c363a2bdd4f4d6b3a2f7433e6e48f6d /Documentation
parent37d9869ed928268409b48f52c57449918c0fd307 (diff)
parent72474be62d6ec2e0337ff01ecbd737f9c5c242c7 (diff)
downloadlinux-d3570a5a7b8d0604fa012129f92637dc1534f62c.tar.xz
Merge branch 'for-linus' of git://git.alsa-project.org/alsa-kernel
* 'for-linus' of git://git.alsa-project.org/alsa-kernel: (258 commits) ALSA: hda: VREF powerdown for headphones ALSA: hda: STAC_HP_M4 ALSA: ASoC: Check for machine type in GTA01 machine driver ALSA: mtpav - Fix race in probe ALSA: usb-audio: dynamic detection of MIDI interfaces in uaxx-quirk ALSA: Add a note on dependency of RTC stuff ALSA: ASoC: add new param mux to dapm_mux_update_power ALSA: Increase components array size ALSA: ASoC: Correct inverted Mic PGA Switch control in wm8510 driver ALSA: hda: comment typo fix ALSA: hda: comment typo fix ALSA: hda - Fix PCI SSID for ASROCK K18N78FullHD-hSLI ALSA: snd-usb-audio: support for Edirol UA-4FX device ALSA: usb - Fix possible Oops at USB-MIDI disconnection ALSA: hda - Fix another ALC889A (rev 0x100101) ALSA: hda: add more board-specific information for Realtek ALC662 rev1 ALSA: Correct Vladimir Barinov's e-mail address ALSA: cs46xx: Add PCI IDs for TerraTec and Hercules cards ALSA: hda: SPDIF stream muting support ALSA: hda: appletv support ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/sound/alsa/ALSA-Configuration.txt62
-rw-r--r--Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl62
2 files changed, 90 insertions, 34 deletions
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index b117e42a6166..e0e54a27fc10 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -746,8 +746,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module snd-hda-intel
--------------------
- Module for Intel HD Audio (ICH6, ICH6M, ESB2, ICH7, ICH8),
- ATI SB450, SB600, RS600,
+ Module for Intel HD Audio (ICH6, ICH6M, ESB2, ICH7, ICH8, ICH9, ICH10,
+ PCH, SCH),
+ ATI SB450, SB600, R600, RS600, RS690, RS780, RV610, RV620,
+ RV630, RV635, RV670, RV770,
VIA VT8251/VT8237A,
SIS966, ULI M5461
@@ -807,6 +809,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
ALC260
hp HP machines
hp-3013 HP machines (3013-variant)
+ hp-dc7600 HP DC7600
fujitsu Fujitsu S7020
acer Acer TravelMate
will Will laptops (PB V7900)
@@ -828,8 +831,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
hippo Hippo (ATI) with jack detection, Sony UX-90s
hippo_1 Hippo (Benq) with jack detection
sony-assamd Sony ASSAMD
+ toshiba-s06 Toshiba S06
+ toshiba-rx1 Toshiba RX1
ultra Samsung Q1 Ultra Vista model
lenovo-3000 Lenovo 3000 y410
+ nec NEC Versa S9100
basic fixed pin assignment w/o SPDIF
auto auto-config reading BIOS (default)
@@ -838,6 +844,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
3stack 3-stack model
toshiba Toshiba A205
acer Acer laptops
+ acer-aspire Acer Aspire One
dell Dell OEM laptops (Vostro 1200)
zepto Zepto laptops
test for testing/debugging purpose, almost all controls can
@@ -847,6 +854,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
ALC269
basic Basic preset
+ quanta Quanta FL1
+ eeepc-p703 ASUS Eeepc P703 P900A
+ eeepc-p901 ASUS Eeepc P901 S101
ALC662/663
3stack-dig 3-stack (2-channel) with SPDIF
@@ -856,10 +866,17 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
lenovo-101e Lenovo laptop
eeepc-p701 ASUS Eeepc P701
eeepc-ep20 ASUS Eeepc EP20
+ ecs ECS/Foxconn mobo
m51va ASUS M51VA
g71v ASUS G71V
h13 ASUS H13
g50v ASUS G50V
+ asus-mode1 ASUS
+ asus-mode2 ASUS
+ asus-mode3 ASUS
+ asus-mode4 ASUS
+ asus-mode5 ASUS
+ asus-mode6 ASUS
auto auto-config reading BIOS (default)
ALC882/885
@@ -891,12 +908,14 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
lenovo-101e Lenovo 101E
lenovo-nb0763 Lenovo NB0763
lenovo-ms7195-dig Lenovo MS7195
+ lenovo-sky Lenovo Sky
haier-w66 Haier W66
3stack-hp HP machines with 3stack (Lucknow, Samba boards)
6stack-dell Dell machines with 6stack (Inspiron 530)
mitac Mitac 8252D
clevo-m720 Clevo M720 laptop series
fujitsu-pi2515 Fujitsu AMILO Pi2515
+ 3stack-6ch-intel Intel DG33* boards
auto auto-config reading BIOS (default)
ALC861/660
@@ -929,7 +948,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
allout 5-jack in back, 2-jack in front, SPDIF out
auto auto-config reading BIOS (default)
- AD1882
+ AD1882 / AD1882A
3stack 3-stack mode (default)
6stack 6-stack mode
@@ -1079,7 +1098,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
register value without FIFO size correction as the current
DMA pointer. position_fix=2 will make the driver to use
the position buffer instead of reading SD_LPIB register.
- (Usually SD_LPLIB register is more accurate than the
+ (Usually SD_LPIB register is more accurate than the
position buffer.)
NB: If you get many "azx_get_response timeout" messages at
@@ -1166,6 +1185,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
* Event Electronics, EZ8
* Digigram VX442
* Lionstracs, Mediastaton
+ * Terrasoniq TS 88
model - Use the given board model, one of the following:
delta1010, dio2496, delta66, delta44, audiophile, delta410,
@@ -1200,7 +1220,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
* TerraTec Phase 22
* TerraTec Phase 28
* AudioTrak Prodigy 7.1
- * AudioTrak Prodigy 7.1LT
+ * AudioTrak Prodigy 7.1 LT
+ * AudioTrak Prodigy 7.1 XT
+ * AudioTrak Prodigy 7.1 HIFI
+ * AudioTrak Prodigy 7.1 HD2
* AudioTrak Prodigy 192
* Pontis MS300
* Albatron K8X800 Pro II
@@ -1211,12 +1234,16 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
* Shuttle SN25P
* Onkyo SE-90PCI
* Onkyo SE-200PCI
+ * ESI Juli@
+ * Hercules Fortissimo IV
+ * EGO-SYS WaveTerminal 192M
model - Use the given board model, one of the following:
revo51, revo71, amp2000, prodigy71, prodigy71lt,
- prodigy192, aureon51, aureon71, universe, ap192,
- k8x800, phase22, phase28, ms300, av710, se200pci,
- se90pci
+ prodigy71xt, prodigy71hifi, prodigyhd2, prodigy192,
+ juli, aureon51, aureon71, universe, ap192, k8x800,
+ phase22, phase28, ms300, av710, se200pci, se90pci,
+ fortissimo4, sn25p, WT192M
This module supports multiple cards and autoprobe.
@@ -1255,7 +1282,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module for AC'97 motherboards from Intel and compatibles.
* Intel i810/810E, i815, i820, i830, i84x, MX440
- ICH5, ICH6, ICH7, ESB2
+ ICH5, ICH6, ICH7, 6300ESB, ESB2
* SiS 7012 (SiS 735)
* NVidia NForce, NForce2, NForce3, MCP04, CK804
CK8, CK8S, MCP501
@@ -1951,6 +1978,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
* CHIC True Sound 4Dwave
* Shark Predator4D-PCI
* Jaton SonicWave 4D
+ * SiS SI7018 PCI Audio
+ * Hoontech SoundTrack Digital 4DWave NX
pcm_channels - max channels (voices) reserved for PCM
wavetable_size - max wavetable size in kB (4-?kb)
@@ -1966,12 +1995,25 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
vid - Vendor ID for the device (optional)
pid - Product ID for the device (optional)
+ nrpacks - Max. number of packets per URB (default: 8)
+ async_unlink - Use async unlink mode (default: yes)
device_setup - Device specific magic number (optional)
- Influence depends on the device
- Default: 0x0000
+ ignore_ctl_error - Ignore any USB-controller regarding mixer
+ interface (default: no)
This module supports multiple devices, autoprobe and hotplugging.
+ NB: nrpacks parameter can be modified dynamically via sysfs.
+ Don't put the value over 20. Changing via sysfs has no sanity
+ check.
+ NB: async_unlink=0 would cause Oops. It remains just for
+ debugging purpose (if any).
+ NB: ignore_ctl_error=1 may help when you get an error at accessing
+ the mixer element such as URB error -22. This happens on some
+ buggy USB device or the controller.
+
Module snd-usb-caiaq
--------------------
@@ -2078,7 +2120,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
-------------------
Module for sound cards based on the Asus AV100/AV200 chips,
- i.e., Xonar D1, DX, D2 and D2X.
+ i.e., Xonar D1, DX, D2, D2X and HDAV1.3 (Deluxe).
This module supports autoprobe and multiple cards.
diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
index e13c4e67029f..b54cb5048dfa 100644
--- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
@@ -6135,44 +6135,58 @@ struct _snd_pcm_runtime {
</para>
</section>
- <section id="useful-functions-snd-assert">
- <title><function>snd_assert()</function></title>
+ <section id="useful-functions-snd-bug">
+ <title><function>snd_BUG()</function></title>
<para>
- <function>snd_assert()</function> macro is similar with the
- normal <function>assert()</function> macro. For example,
+ It shows the <computeroutput>BUG?</computeroutput> message and
+ stack trace as well as <function>snd_BUG_ON</function> at the point.
+ It's useful to show that a fatal error happens there.
+ </para>
+ <para>
+ When no debug flag is set, this macro is ignored.
+ </para>
+ </section>
+
+ <section id="useful-functions-snd-bug-on">
+ <title><function>snd_BUG_ON()</function></title>
+ <para>
+ <function>snd_BUG_ON()</function> macro is similar with
+ <function>WARN_ON()</function> macro. For example,
<informalexample>
<programlisting>
<![CDATA[
- snd_assert(pointer != NULL, return -EINVAL);
+ snd_BUG_ON(!pointer);
]]>
</programlisting>
</informalexample>
- </para>
- <para>
- The first argument is the expression to evaluate, and the
- second argument is the action if it fails. When
- <constant>CONFIG_SND_DEBUG</constant>, is set, it will show an
- error message such as <computeroutput>BUG? (xxx)</computeroutput>
- together with stack trace.
- </para>
- <para>
- When no debug flag is set, this macro is ignored.
- </para>
- </section>
+ or it can be used as the condition,
+ <informalexample>
+ <programlisting>
+<![CDATA[
+ if (snd_BUG_ON(non_zero_is_bug))
+ return -EINVAL;
+]]>
+ </programlisting>
+ </informalexample>
- <section id="useful-functions-snd-bug">
- <title><function>snd_BUG()</function></title>
- <para>
- It shows the <computeroutput>BUG?</computeroutput> message and
- stack trace as well as <function>snd_assert</function> at the point.
- It's useful to show that a fatal error happens there.
</para>
+
<para>
- When no debug flag is set, this macro is ignored.
+ The macro takes an conditional expression to evaluate.
+ When <constant>CONFIG_SND_DEBUG</constant>, is set, the
+ expression is actually evaluated. If it's non-zero, it shows
+ the warning message such as
+ <computeroutput>BUG? (xxx)</computeroutput>
+ normally followed by stack trace. It returns the evaluated
+ value.
+ When no <constant>CONFIG_SND_DEBUG</constant> is set, this
+ macro always returns zero.
</para>
+
</section>
+
</chapter>