Merge tag 'regulator-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "A fairly quiet release, there were some cleanup and a couple of new
  devices but the biggest change was converting most of the drivers to
  use asynchronous probe. This allows us to ramp up multiple regulators
  in parallel during boot which can have a noticable impact on modern
  systems.

  Summary:

   - Update of drivers to PROBE_PREFER_ASYNCHRONOUS to mitigate issues
     with ramp times slowing down boots.

   - Convert to void remove callbacks.

   - Support for voltage monitoring on DA9063

   - Support for Qualcomm PMC8180 and PMM8654au, Richtek RT4803 and
     RT5739, Rockchip RK860x"

* tag 'regulator-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (46 commits)
  regulator: dt-bindings: qcom,rpmh: Combine PM6150L and PM8150L if-then
  regulator: core: Make regulator_lock_two() logic easier to follow
  regulator: dt-bindings: qcom,rpmh: Correct PM8550 family supplies
  regulator: stm32-pwr: fix of_iomap leak
  dt-bindings: mfd: dlg,da9063: document voltage monitoring
  regulator: da9063: implement setter for voltage monitoring
  regulator: da9063: add voltage monitoring registers
  regulator: fan53555: Add support for RK860X
  regulator: fan53555: Use dev_err_probe
  regulator: fan53555: Improve vsel_mask computation
  regulator: fan53555: Make use of the bit macros
  regulator: fan53555: Remove unused *_SLEW_SHIFT definitions
  regulator: dt-bindings: fcs,fan53555: Add support for RK860X
  regulator: qcom_smd: Add MP5496 S1 regulator
  regulator: qcom_smd: Add s1 sub-node to mp5496 regulator
  regulator: qcom,rpmh: add compatible for pmm8654au RPMH
  regulator: qcom-rpmh: add support for pmm8654au regulators
  regulator: core: Avoid lockdep reports when resolving supplies
  regulator: core: Consistently set mutex_owner when using ww_mutex_lock_slow()
  regulator: dt-bindings: qcom,rpmh: Add compatible for PMC8180
  ...

41 files changed, 294 insertions, 134 deletions

diff --git a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
index e8e74e91070c..c5a7e10d7d80 100644
--- a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
+++ b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
@@ -12,6 +12,11 @@ maintainers:
 description: |
   For device-tree bindings of other sub-modules refer to the binding documents
   under the respective sub-system directories.
+  Using regulator-{uv,ov}-{warn,error,protection}-microvolt requires special
+  handling: First, when GP_FB2 is used, it must be ensured that there is no
+  moment where all voltage monitors are disabled. Next, as da9063 only supports
+  UV *and* OV monitoring, both must be set to the same severity and value
+  (0: disable, 1: enable).
 
 properties:
   compatible:
@@ -121,11 +126,19 @@ examples:
             regulator-max-microamp = <2000000>;
             regulator-boot-on;
           };
+          ldo6 {
+            /* UNUSED */
+            regulator-name = "LDO_6";
+            regulator-uv-protection-microvolt = <0>;
+            regulator-ov-protection-microvolt = <0>;
+          };
           ldo11 {
             regulator-name = "LDO_11";
             regulator-min-microvolt = <900000>;
-            regulator-max-microvolt = <3600000>;
-            regulator-boot-on;
+            regulator-max-microvolt = <900000>;
+            regulator-uv-protection-microvolt = <1>;
+            regulator-ov-protection-microvolt = <1>;
+            regulator-always-on;
           };
         };
       };
diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml
index 0a66338c7e5a..17250378542a 100644
--- a/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
 
 allOf:
-  - $ref: "regulator.yaml#"
+  - $ref: regulator.yaml#
 
 properties:
   compatible:
@@ -19,43 +19,43 @@ properties:
   regulator-name: true
 
   anatop-reg-offset:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: u32 value representing the anatop MFD register offset.
 
   anatop-vol-bit-shift:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: u32 value representing the bit shift for the register.
 
   anatop-vol-bit-width:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: u32 value representing the number of bits used in the register.
 
   anatop-min-bit-val:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: u32 value representing the minimum value of this register.
 
   anatop-min-voltage:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: u32 value representing the minimum voltage of this regulator.
 
   anatop-max-voltage:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: u32 value representing the maximum voltage of this regulator.
 
   anatop-delay-reg-offset:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: u32 value representing the anatop MFD step time register offset.
 
   anatop-delay-bit-shift:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: u32 value representing the bit shift for the step time register.
 
   anatop-delay-bit-width:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: u32 value representing the number of bits used in the step time register.
 
   anatop-enable-bit:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: u32 value representing regulator enable bit offset.
 
   vin-supply:
diff --git a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml
index 63e1161a87de..dc626517c2ad 100644
--- a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml
+++ b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml
@@ -109,7 +109,7 @@ properties:
             description: Specify a valid GPIO for platform control of the regulator
 
           dlg,ripple-cancel:
-            $ref: "/schemas/types.yaml#/definitions/uint32"
+            $ref: /schemas/types.yaml#/definitions/uint32
             enum: [ 0, 1, 2, 3 ]
             description: |
               Defined in include/dt-bindings/regulator/dlg,da9121-regulator.h
diff --git a/Documentation/devicetree/bindings/regulator/fcs,fan53555.yaml b/Documentation/devicetree/bindings/regulator/fcs,fan53555.yaml
index c0dbba843f70..69bae90fc4b2 100644
--- a/Documentation/devicetree/bindings/regulator/fcs,fan53555.yaml
+++ b/Documentation/devicetree/bindings/regulator/fcs,fan53555.yaml
@@ -14,12 +14,21 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - fcs,fan53555
-      - fcs,fan53526
-      - silergy,syr827
-      - silergy,syr828
-      - tcs,tcs4525
+    oneOf:
+      - enum:
+          - fcs,fan53555
+          - fcs,fan53526
+          - rockchip,rk8600
+          - rockchip,rk8602
+          - silergy,syr827
+          - silergy,syr828
+          - tcs,tcs4525
+      - items:
+          - const: rockchip,rk8601
+          - const: rockchip,rk8600
+      - items:
+          - const: rockchip,rk8603
+          - const: rockchip,rk8602
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
index 48af7cba4652..ac0281b1cceb 100644
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
@@ -17,7 +17,7 @@ description:
   to be the same.
 
 allOf:
-  - $ref: "regulator.yaml#"
+  - $ref: regulator.yaml#
   - if:
       properties:
         compatible:
diff --git a/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml b/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml
index 0921f012c901..e0ff5012b763 100644
--- a/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml
@@ -14,7 +14,7 @@ description:
   regulator.yaml, can also be used.
 
 allOf:
-  - $ref: "regulator.yaml#"
+  - $ref: regulator.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
index 6c3371d706bb..f4c1f36e52e9 100644
--- a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
@@ -15,7 +15,7 @@ description:
   regulator.txt, can also be used.
 
 allOf:
-  - $ref: "regulator.yaml#"
+  - $ref: regulator.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
index 01b9775a92d1..27d5e9c2bb93 100644
--- a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
@@ -25,7 +25,7 @@ properties:
 
 patternProperties:
   "^regulator-(ldo|sbb[0-2])$":
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
     unevaluatedProperties: false
 
 required:
diff --git a/Documentation/devicetree/bindings/regulator/max8660.yaml b/Documentation/devicetree/bindings/regulator/max8660.yaml
index 35792a927b03..f05f4644c8ee 100644
--- a/Documentation/devicetree/bindings/regulator/max8660.yaml
+++ b/Documentation/devicetree/bindings/regulator/max8660.yaml
@@ -25,7 +25,7 @@ properties:
 
     patternProperties:
       "^regulator-.+$":
-        $ref: "regulator.yaml#"
+        $ref: regulator.yaml#
         unevaluatedProperties: false
 
     additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/max8893.yaml b/Documentation/devicetree/bindings/regulator/max8893.yaml
index 2b5e977bf409..e40ee798e198 100644
--- a/Documentation/devicetree/bindings/regulator/max8893.yaml
+++ b/Documentation/devicetree/bindings/regulator/max8893.yaml
@@ -25,7 +25,7 @@ properties:
 
     patternProperties:
       "^(ldo[1-5]|buck)$":
-        $ref: "regulator.yaml#"
+        $ref: regulator.yaml#
 
     additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml
index 771cc134393c..79e5198e1c73 100644
--- a/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml
@@ -18,7 +18,7 @@ description: |
 patternProperties:
   "^buck-v(core2|io18|dvfs11|dvfs12|dvfs13|dvfs14)$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -28,7 +28,7 @@ patternProperties:
 
   "^ldo-v(avdd32aud|auxa32)$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -38,7 +38,7 @@ patternProperties:
 
   "^ldo-v(dig18|emc33|ibr|mc|mch|mipi|rtc|sram|usb10)$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -48,7 +48,7 @@ patternProperties:
 
   "^ldo-vcam(a|af|d|io)$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -58,7 +58,7 @@ patternProperties:
 
   "^ldo-vtcxo[12]$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -71,7 +71,7 @@ patternProperties:
 
   "^ldo-vgp[1234]$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml
index 3218f43e6957..2eb512c29a0d 100644
--- a/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml
@@ -18,7 +18,7 @@ description: |
 patternProperties:
   "^buck-v(dram|dvfs2|pa|rf18a|rf18b|sbst)$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -28,7 +28,7 @@ patternProperties:
 
   "^ldo-v(bif28|dig18|sram|usb33)$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
index 7023c597c3ed..2e720d152890 100644
--- a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
+++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
@@ -28,11 +28,11 @@ properties:
 
     patternProperties:
       "^buck[1-4]$":
-        $ref: "regulator.yaml#"
+        $ref: regulator.yaml#
         type: object
 
       "^ldo[1-4]$":
-        $ref: "regulator.yaml#"
+        $ref: regulator.yaml#
         type: object
 
     additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml
index 9245b7199439..374a4f6b1e23 100644
--- a/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml
+++ b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml
@@ -28,7 +28,7 @@ properties:
   mps,fb-voltage-divider:
     description: An array of two integers containing the resistor
       values R1 and R2 of the feedback voltage divider in kilo ohms.
-    $ref: "/schemas/types.yaml#/definitions/uint32-array"
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     maxItems: 2
 
   mps,switch-frequency-hz:
diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
index c2e8c54e5311..f3fcfc8be72f 100644
--- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
+++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
@@ -29,7 +29,7 @@ properties:
 
     properties:
       mps,switch-freq:
-        $ref: "/schemas/types.yaml#/definitions/uint8"
+        $ref: /schemas/types.yaml#/definitions/uint8
         enum: [0, 1, 2, 3]
         default: 2
         description: |
@@ -51,14 +51,14 @@ properties:
 
         properties:
           mps,buck-softstart:
-            $ref: "/schemas/types.yaml#/definitions/uint8"
+            $ref: /schemas/types.yaml#/definitions/uint8
             enum: [0, 1, 2, 3]
             description: |
               defines the soft start time of this buck, must be one of the following
               corresponding values 150us, 300us, 610us, 920us
 
           mps,buck-phase-delay:
-            $ref: "/schemas/types.yaml#/definitions/uint8"
+            $ref: /schemas/types.yaml#/definitions/uint8
             enum: [0, 1, 2, 3]
             description: |
               defines the phase delay of this buck, must be one of the following
diff --git a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
index 364b58730be2..6317daf76d1f 100644
--- a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
@@ -28,7 +28,7 @@ properties:
     patternProperties:
       "^vbuck[1-4]$":
         type: object
-        $ref: "regulator.yaml#"
+        $ref: regulator.yaml#
         unevaluatedProperties: false
 
         properties:
diff --git a/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
index 8cc413eb482d..d6b3b5a5c0b3 100644
--- a/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
@@ -17,7 +17,7 @@ description: |
 patternProperties:
   "^buck_v(s1|gpu11|modem|pu|core|s2|pa|proc2|proc1|core_sshub)$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -27,7 +27,7 @@ patternProperties:
 
   "^ldo_v(ibr|rf12|usb|camio|efuse|xo22)$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -37,7 +37,7 @@ patternProperties:
 
   "^ldo_v(rfck|emc|a12|a09|ufs|bbck)$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -47,7 +47,7 @@ patternProperties:
 
   "^ldo_vcn(18|13|33_1_bt|13_1_wifi|33_2_bt|33_2_wifi)$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -57,7 +57,7 @@ patternProperties:
 
   "^ldo_vsram_(proc2|others|md|proc1|others_sshub)$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -67,7 +67,7 @@ patternProperties:
 
   "^ldo_v(fe|bif|io)28$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -77,7 +77,7 @@ patternProperties:
 
   "^ldo_v(aud|io|aux|rf|m)18$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -87,7 +87,7 @@ patternProperties:
 
   "^ldo_vsim[12]$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
diff --git a/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml
index 8a0931dc2f30..9c879bc3c360 100644
--- a/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml
@@ -26,11 +26,11 @@ properties:
 
 patternProperties:
   "^buck[12]$":
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
     unevaluatedProperties: false
 
   "^ldo[123567]$":
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
     unevaluatedProperties: false
 
 required:
diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
index 835b53302db8..d2383e523875 100644
--- a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
@@ -57,7 +57,7 @@ properties:
 
         properties:
           nxp,dvs-run-voltage:
-            $ref: "/schemas/types.yaml#/definitions/uint32"
+            $ref: /schemas/types.yaml#/definitions/uint32
             minimum: 600000
             maximum: 2187500
             description:
@@ -65,7 +65,7 @@ properties:
               dvs(dynamic voltage scaling) property.
 
           nxp,dvs-standby-voltage:
-            $ref: "/schemas/types.yaml#/definitions/uint32"
+            $ref: /schemas/types.yaml#/definitions/uint32
             minimum: 600000
             maximum: 2187500
             description:
diff --git a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
index aabf50f5b39e..6b1c6a176dbe 100644
--- a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
@@ -38,12 +38,6 @@ properties:
         description:
           Properties for single LDO regulator.
 
-        properties:
-          regulator-name:
-            pattern: "^ldo[1-4]$"
-            description:
-              should be "ldo1", ..., "ldo4"
-
         unevaluatedProperties: false
 
       "^buck[1-7]$":
@@ -53,13 +47,8 @@ properties:
           Properties for single BUCK regulator.
 
         properties:
-          regulator-name:
-            pattern: "^buck[1-7]$"
-            description:
-              should be "buck1", ..., "buck7"
-
           nxp,ilim-ma:
-            $ref: "/schemas/types.yaml#/definitions/uint32"
+            $ref: /schemas/types.yaml#/definitions/uint32
             minimum: 2100
             maximum: 4500
             deprecated: true
@@ -75,7 +64,7 @@ properties:
               4500
 
           nxp,phase-shift:
-            $ref: "/schemas/types.yaml#/definitions/uint32"
+            $ref: /schemas/types.yaml#/definitions/uint32
             default: 0
             enum: [ 0, 45, 90, 135, 180, 225, 270, 315 ]
             description:
@@ -90,12 +79,6 @@ properties:
         description:
           Properties for single VSNVS regulator.
 
-        properties:
-          regulator-name:
-            pattern: "^vsnvs$"
-            description:
-              should be "vsnvs"
-
         unevaluatedProperties: false
 
     additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.yaml b/Documentation/devicetree/bindings/regulator/pfuze100.yaml
index a26bbd68b729..67a30b23b92c 100644
--- a/Documentation/devicetree/bindings/regulator/pfuze100.yaml
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.yaml
@@ -63,19 +63,19 @@ properties:
 
     patternProperties:
       "^sw([1-4]|[1-4][a-c]|[1-4][a-c][a-c])$":
-        $ref: "regulator.yaml#"
+        $ref: regulator.yaml#
         type: object
 
       "^vgen[1-6]$":
-        $ref: "regulator.yaml#"
+        $ref: regulator.yaml#
         type: object
 
       "^vldo[1-4]$":
-        $ref: "regulator.yaml#"
+        $ref: regulator.yaml#
         type: object
 
       "^(vsnvs|vref|vrefddr|swbst|coin|v33|vccsd)$":
-        $ref: "regulator.yaml#"
+        $ref: regulator.yaml#
         type: object
 
     additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
index 297a75069f60..b9498504ad79 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
@@ -75,9 +75,12 @@ properties:
       - qcom,pm8550ve-rpmh-regulators
       - qcom,pm8550vs-rpmh-regulators
       - qcom,pm8998-rpmh-regulators
+      - qcom,pmc8180-rpmh-regulators
+      - qcom,pmc8180c-rpmh-regulators
       - qcom,pmg1110-rpmh-regulators
       - qcom,pmi8998-rpmh-regulators
       - qcom,pmm8155au-rpmh-regulators
+      - qcom,pmm8654au-rpmh-regulators
       - qcom,pmr735a-rpmh-regulators
       - qcom,pmx55-rpmh-regulators
       - qcom,pmx65-rpmh-regulators
@@ -105,18 +108,18 @@ properties:
 
   bob:
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
     description: BOB regulator node.
     dependencies:
-      regulator-allow-set-load: ["regulator-allowed-modes"]
+      regulator-allow-set-load: [ regulator-allowed-modes ]
 
 patternProperties:
   "^(smps|ldo|lvs|bob)[0-9]+$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
     description: smps/ldo regulator nodes(s).
     dependencies:
-      regulator-allow-set-load: ["regulator-allowed-modes"]
+      regulator-allow-set-load: [ regulator-allowed-modes ]
 
 required:
   - compatible
@@ -144,6 +147,8 @@ allOf:
         compatible:
           enum:
             - qcom,pm6150l-rpmh-regulators
+            - qcom,pm8150l-rpmh-regulators
+            - qcom,pmc8180c-rpmh-regulators
     then:
       properties:
         vdd-bob-supply:
@@ -232,6 +237,7 @@ allOf:
         compatible:
           enum:
             - qcom,pm8150-rpmh-regulators
+            - qcom,pmc8180-rpmh-regulators
             - qcom,pmm8155au-rpmh-regulators
     then:
       properties:
@@ -248,18 +254,17 @@ allOf:
       properties:
         compatible:
           enum:
-            - qcom,pm8150l-rpmh-regulators
+            - qcom,pmm8654au-rpmh-regulators
     then:
       properties:
-        vdd-bob-supply:
-          description: BOB regulator parent supply phandle.
-        vdd-l1-l8-supply: true
+        vdd-l1-supply: true
         vdd-l2-l3-supply: true
-        vdd-l4-l5-l6-supply: true
-        vdd-l7-l11-supply: true
-        vdd-l9-l10-supply: true
+        vdd-l4-supply: true
+        vdd-l5-supply: true
+        vdd-l6-l7-supply: true
+        vdd-l8-l9-supply: true
       patternProperties:
-        "^vdd-s[1-8]-supply$": true
+        "^vdd-s[1-9]-supply$": true
 
   - if:
       properties:
@@ -308,16 +313,15 @@ allOf:
         compatible:
           enum:
             - qcom,pm8550-rpmh-regulators
-            - qcom,pm8550ve-rpmh-regulators
-            - qcom,pm8550vs-rpmh-regulators
     then:
       properties:
+        vdd-l1-l4-l10-supply: true
         vdd-l2-l13-l14-supply: true
         vdd-l5-l16-supply: true
         vdd-l6-l7-supply: true
         vdd-l8-l9-supply: true
       patternProperties:
-        "^vdd-l([1-4]|1[0-7])-supply$": true
+        "^vdd-l(3|1[1-7])-supply$": true
         "^vdd-s[1-6]-supply$": true
         "^vdd-bob[1-2]-supply$": true
 
@@ -325,6 +329,17 @@ allOf:
       properties:
         compatible:
           enum:
+            - qcom,pm8550ve-rpmh-regulators
+            - qcom,pm8550vs-rpmh-regulators
+    then:
+      patternProperties:
+        "^vdd-l[1-3]-supply$": true
+        "^vdd-s[1-6]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
             - qcom,pm8998-rpmh-regulators
     then:
       properties:
diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
index 8c45f53212b1..a8ca8e0b27f8 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
@@ -22,7 +22,7 @@ description:
   Each sub-node is identified using the node's name, with valid values listed
   for each of the pmics below.
 
-  For mp5496, s2
+  For mp5496, s1, s2
 
   For pm2250, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
   l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22
diff --git a/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml
index 0ae25d119b6f..41678400e63f 100644
--- a/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml
@@ -15,7 +15,7 @@ description: |
   and control the backlight.
 
 allOf:
-  - $ref: "regulator.yaml#"
+  - $ref: regulator.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml
index 53b81d8a2d41..e158c2d3d3f9 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/regulator.yaml
@@ -13,7 +13,7 @@ maintainers:
 properties:
   regulator-name:
     description: A string used as a descriptive name for regulator outputs
-    $ref: "/schemas/types.yaml#/definitions/string"
+    $ref: /schemas/types.yaml#/definitions/string
 
   regulator-min-microvolt:
     description: smallest voltage consumers may set
@@ -23,7 +23,7 @@ properties:
 
   regulator-microvolt-offset:
     description: Offset applied to voltages to compensate for voltage drops
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   regulator-min-microamp:
     description: smallest current consumers may set
@@ -59,7 +59,7 @@ properties:
     description: ramp delay for regulator(in uV/us) For hardware which supports
       disabling ramp rate, it should be explicitly initialised to zero (regulator-ramp-delay
       = <0>) for disabling ramp delay.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   regulator-enable-ramp-delay:
     description: The time taken, in microseconds, for the supply rail to
@@ -68,7 +68,7 @@ properties:
       required due to the combination of internal ramping of the regulator
       itself, and board design issues such as trace capacitance and load
       on the supply.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   regulator-settling-time-us:
     description: Settling time, in microseconds, for voltage change if regulator
@@ -95,7 +95,7 @@ properties:
     description: initial operating mode. The set of possible operating modes
       depends on the capabilities of every hardware so each device binding
       documentation explains which values the regulator supports.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   regulator-allowed-modes:
     description: list of operating modes that software is allowed to configure
@@ -103,12 +103,12 @@ properties:
       The set of possible operating modes depends on the capabilities of
       every hardware so each device binding document explains which values
       the regulator supports.
-    $ref: "/schemas/types.yaml#/definitions/uint32-array"
+    $ref: /schemas/types.yaml#/definitions/uint32-array
 
   regulator-system-load:
     description: Load in uA present on regulator that is not captured by
       any consumer request.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   regulator-pull-down:
     description: Enable pull down resistor when the regulator is disabled.
@@ -206,14 +206,14 @@ properties:
       0: Disable active discharge.
       1: Enable active discharge.
       Absence of this property will leave configuration to default.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
 
   regulator-coupled-with:
     description: Regulators with which the regulator is coupled. The linkage
       is 2-way - all coupled regulators should be linked with each other.
       A regulator should not be coupled with its supplier.
-    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
       maxItems: 1
 
@@ -221,7 +221,7 @@ properties:
     description: Array of maximum spread between voltages of coupled regulators
       in microvolts, each value in the array relates to the corresponding
       couple specified by the regulator-coupled-with property.
-    $ref: "/schemas/types.yaml#/definitions/uint32-array"
+    $ref: /schemas/types.yaml#/definitions/uint32-array
 
   regulator-max-step-microvolt:
     description: Maximum difference between current and target voltages
@@ -269,7 +269,7 @@ patternProperties:
           of possible operating modes depends on the capabilities of every
           hardware so the valid modes are documented on each regulator device
           tree binding document.
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
 
     additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt4803.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt4803.yaml
new file mode 100644
index 000000000000..6ceba022e550
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt4803.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rt4803.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT4803 Boost Regulator
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  RT4803 is a boost regulator that's designed to provide the minimum output
+  voltage, even if the input voltage is lower than the required voltage. It
+  supports boost and auto bypass mode that depends on the difference between the
+  input and output voltage. If the input is lower than the output, mode will
+  transform to boost mode. Otherwise, turn on bypass switch to enter bypass mode.
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RT4803/DS4803-03.pdf
+  https://www.richtek.com/assets/product_file/RT4803A/DS4803A-06.pdf
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt4803
+
+  reg:
+    maxItems: 1
+
+  richtek,vsel-active-high:
+    type: boolean
+    description: Specify the VSEL register group is using when system is active
+
+  regulator-allowed-modes:
+    description: |
+      Available operating mode
+        1: Auto PFM/PWM
+        2: Force PWM
+    items:
+      enum: [1, 2]
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      regulator@75 {
+        compatible = "richtek,rt4803";
+        reg = <0x75>;
+        richtek,vsel-active-high;
+        regulator-name = "rt4803-regulator";
+        regulator-min-microvolt = <2850000>;
+        regulator-max-microvolt = <4400000>;
+        regulator-allowed-modes = <1 2>;
+        regulator-always-on;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml
new file mode 100644
index 000000000000..358297dd3fb7
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rt5739.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5739 Step-Down Buck Converter
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT5739 is a step-down switching buck converter that can deliver the
+  programmable output voltage from 300mV to 1300mV with wide input voltage
+  supply of 2.5V to 5.5V. It can provide up to 3.5A continuous current
+  capability at over 80% high efficiency.
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt5739
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    maxItems: 1
+
+  richtek,vsel-active-high:
+    description: |
+      If property is present, use the 'VSEL1' register group for buck control.
+      Else, use the 'VSEL0' register group. This depends on external hardware
+      'VSEL' pin connection.
+    type: boolean
+
+  regulator-allowed-modes:
+    description: |
+      buck allowed operating mode
+        0: Auto PFM/PWM mode
+        1: Forced PWM mode
+    items:
+      enum: [0, 1]
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      regulator@50 {
+        compatible = "richtek,rt5739";
+        reg = <0x50>;
+        enable-gpios = <&gpio26 1 GPIO_ACTIVE_HIGH>;
+        richtek,vsel-active-high;
+        regulator-name = "richtek,rt5739-buck";
+        regulator-min-microvolt = <300000>;
+        regulator-max-microvolt = <1300000>;
+        regulator-allowed-modes = <0 1>;
+        regulator-boot-on;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
index e983d0e70c9b..b73762e151bb 100644
--- a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
@@ -32,7 +32,7 @@ properties:
     maxItems: 1
 
   richtek,oc-level-select:
-    $ref: "/schemas/types.yaml#/definitions/uint8"
+    $ref: /schemas/types.yaml#/definitions/uint8
     enum: [0, 1, 2, 3]
     description: |
       Over current level selection. Each respective value means the current
@@ -40,7 +40,7 @@ properties:
       in chip default.
 
   richtek,ot-level-select:
-    $ref: "/schemas/types.yaml#/definitions/uint8"
+    $ref: /schemas/types.yaml#/definitions/uint8
     enum: [0, 1, 2]
     description: |
       Over temperature level selection. Each respective value means the degree
@@ -48,7 +48,7 @@ properties:
       default.
 
   richtek,pgdly-time-select:
-    $ref: "/schemas/types.yaml#/definitions/uint8"
+    $ref: /schemas/types.yaml#/definitions/uint8
     enum: [0, 1, 2, 3]
     description: |
       Power good signal delay time selection. Each respective value means the
@@ -57,7 +57,7 @@ properties:
 
 
   richtek,switch-freq-select:
-    $ref: "/schemas/types.yaml#/definitions/uint8"
+    $ref: /schemas/types.yaml#/definitions/uint8
     enum: [0, 1, 2]
     description: |
       Buck switch frequency selection. Each respective value means 400KHz,
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml
index a8ccb5cb8d77..446ec5127d1f 100644
--- a/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml
@@ -120,7 +120,7 @@ properties:
   lsw:
     description: load switch current regulator description.
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml
index 027fab3dc181..cc4ceb32e9d6 100644
--- a/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml
@@ -56,7 +56,7 @@ patternProperties:
           PMIC "RUN" state voltage in uV when PMIC HW states are used. See
           comments below for bucks/LDOs which support this. 0 means
           regulator should be disabled at RUN state.
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 3300000
 
@@ -67,7 +67,7 @@ patternProperties:
           keeps regulator enabled. BD71815 does not change voltage level
           when PMIC transitions to SNVS.SNVS voltage depends on the previous
           state (from which the PMIC transitioned to SNVS).
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 3300000
 
@@ -76,7 +76,7 @@ patternProperties:
           PMIC "SUSPEND" state voltage in uV when PMIC HW states are used. See
           comments below for bucks/LDOs which support this. 0 means
           regulator should be disabled at SUSPEND state.
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 3300000
 
@@ -85,7 +85,7 @@ patternProperties:
           PMIC "LPSR" state voltage in uV when PMIC HW states are used. See
           comments below for bucks/LDOs which support this. 0 means
           regulator should be disabled at LPSR state.
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 3300000
 
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml
index 3cbe3b76ccee..19b253c09e97 100644
--- a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml
@@ -52,7 +52,7 @@ patternProperties:
         description:
           PMIC default "RUN" state voltage in uV. See below table for
           bucks which support this. 0 means disabled.
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 3300000
 
@@ -60,7 +60,7 @@ patternProperties:
         description:
           PMIC default "IDLE" state voltage in uV. See below table for
           bucks which support this. 0 means disabled.
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 3300000
 
@@ -68,7 +68,7 @@ patternProperties:
         description:
           PMIC default "SUSPEND" state voltage in uV. See below table for
           bucks which support this. 0 means disabled.
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 3300000
 
@@ -76,7 +76,7 @@ patternProperties:
         description:
           PMIC default "LPSR" state voltage in uV. See below table for
           bucks which support this. 0 means disabled.
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 3300000
 
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml
index ab842817d847..6e693fee3493 100644
--- a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml
@@ -55,7 +55,7 @@ patternProperties:
           should be "buck1", ..., "buck8"
 
       rohm,dvs-run-voltage:
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 1300000
         description:
@@ -63,7 +63,7 @@ patternProperties:
           bucks which support this. 0 means disabled.
 
       rohm,dvs-idle-voltage:
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 1300000
         description:
@@ -71,7 +71,7 @@ patternProperties:
           bucks which support this. 0 means disabled.
 
       rohm,dvs-suspend-voltage:
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 1300000
         description:
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml
index 65fc3d15f693..1d3dcfba58b0 100644
--- a/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml
@@ -54,7 +54,7 @@ patternProperties:
           should be "buck1", ..., "buck6"
 
       rohm,dvs-run-voltage:
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 1300000
         description:
@@ -62,7 +62,7 @@ patternProperties:
           bucks which support this. 0 means disabled.
 
       rohm,dvs-idle-voltage:
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 1300000
         description:
@@ -70,7 +70,7 @@ patternProperties:
           bucks which support this. 0 means disabled.
 
       rohm,dvs-suspend-voltage:
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 1300000
         description:
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
index 89b8592db81d..f573128da06f 100644
--- a/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
@@ -25,7 +25,7 @@ patternProperties:
     type: object
     description:
       Properties for single regulator.
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       rohm,ocw-fet-ron-micro-ohms:
diff --git a/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
index a6949a581cd1..ddaa112252e5 100644
--- a/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
@@ -42,7 +42,7 @@ properties:
   reset-names: true
 
 allOf:
-  - $ref: "regulator.yaml#"
+  - $ref: regulator.yaml#
   - if:
       properties:
         compatible:
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
index c82f6f885d97..c863100f6e7d 100644
--- a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
+++ b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
@@ -14,7 +14,7 @@ description: |
   to supply ADC analog input switches.
 
 allOf:
-  - $ref: "regulator.yaml#"
+  - $ref: regulator.yaml#
 
 properties:
   compatible:
@@ -23,7 +23,7 @@ properties:
       - st,stm32mp1-booster
 
   st,syscfg:
-    $ref: "/schemas/types.yaml#/definitions/phandle"
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: phandle to system configuration controller.
 
   vdda-supply:
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
index c1bf1f90490a..05f4ad2c7d3a 100644
--- a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
+++ b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
@@ -15,7 +15,7 @@ maintainers:
   - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
 
 allOf:
-  - $ref: "regulator.yaml#"
+  - $ref: regulator.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
index bd07b9c81570..7d53cfa2c288 100644
--- a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
+++ b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
@@ -26,7 +26,7 @@ patternProperties:
   "^(reg11|reg18|usb33)$":
     type: object
 
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml b/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml
index 12aeddedde05..90c39275c150 100644
--- a/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml
+++ b/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml
@@ -19,7 +19,7 @@ description: |
   https://www.ti.com/lit/gpn/tps62360
 
 allOf:
-  - $ref: "regulator.yaml#"
+  - $ref: regulator.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
index dd7a2f92634c..3b16a25ba3b8 100644
--- a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
@@ -15,7 +15,7 @@ description: |
   controller is also embedded.
 
 allOf:
-  - $ref: "regulator.yaml#"
+  - $ref: regulator.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml
index 7b4ae5d23351..011819c10988 100644
--- a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml
+++ b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml
@@ -21,19 +21,19 @@ properties:
   wlf,ldoena:
     description:
       GPIO specifier for the GPIO controlling LDOENA.
-    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    $ref: /schemas/types.yaml#/definitions/phandle-array
     maxItems: 1
 
   ldo1:
     description:
       Initial data for the LDO1 regulator.
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
     type: object
 
   micvdd:
     description:
       Initial data for the MICVDD regulator.
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
     type: object
 
 additionalProperties: true