diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-06-07 19:42:16 +0300 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-06-07 19:42:16 +0300 |
commit | e611c0fe318c6d6827ee2bba660fbc23cf73f7dc (patch) | |
tree | 00854551e810b32cceab84157882eab147f2a98c /Documentation | |
parent | 3b69e8b4571125bec1f77f886174fe6cab6b9d75 (diff) | |
parent | 347052e3bf1b62a25c11f7a673acfbaf554d67a1 (diff) | |
download | linux-e611c0fe318c6d6827ee2bba660fbc23cf73f7dc.tar.xz |
Merge tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY driver updates from Greg KH:
"Here are the large set of USB and PHY driver updates for 5.8-rc1.
Nothing huge, just lots of little things:
- USB gadget fixes and additions all over the place
- new PHY drivers
- PHY driver fixes and updates
- XHCI driver updates
- musb driver updates
- more USB-serial driver ids added
- various USB quirks added
- thunderbolt minor updates and fixes
- typec updates and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (245 commits)
usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs
usb: dwc3: meson-g12a: fix error path when fetching the reset line fails
Revert "dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings"
Revert "dt-bindings: usb: qcom,dwc3: Add compatible for SC7180"
Revert "dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver"
USB: serial: ch341: fix lockup of devices with limited prescaler
USB: serial: ch341: add basis for quirk detection
CDC-ACM: heed quirk also in error handling
USB: serial: option: add Telit LE910C1-EUX compositions
usb: musb: Fix runtime PM imbalance on error
usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set
usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle
usb: musb: use true for 'use_dma'
usb: musb: start session in resume for host port
usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
USB: serial: qcserial: add DW5816e QDL support
thunderbolt: Add trivial .shutdown
usb: dwc3: keystone: Turn on USB3 PHY before controller
dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property
dt-bindings: usb: convert keystone-usb.txt to YAML
...
Diffstat (limited to 'Documentation')
26 files changed, 1488 insertions, 580 deletions
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson8b-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson8b-usb2-phy.yaml new file mode 100644 index 000000000000..03c4809dbe8d --- /dev/null +++ b/Documentation/devicetree/bindings/phy/amlogic,meson8b-usb2-phy.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/amlogic,meson8b-usb2-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic Meson8, Meson8b, Meson8m2 and GXBB USB2 PHY + +maintainers: + - Martin Blumenstingl <martin.blumenstingl@googlemail.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - amlogic,meson8-usb2-phy + - amlogic,meson8b-usb2-phy + - amlogic,meson8m2-usb2-phy + - const: amlogic,meson-mx-usb2-phy + - const: amlogic,meson-gxbb-usb2-phy + + reg: + maxItems: 1 + + clocks: + minItems: 2 + + clock-names: + items: + - const: usb_general + - const: usb + + resets: + minItems: 1 + + "#phy-cells": + const: 0 + + phy-supply: + description: + Phandle to a regulator that provides power to the PHY. This + regulator will be managed during the PHY power on/off sequence. + +required: + - compatible + - reg + - clocks + - clock-names + - "#phy-cells" + +additionalProperties: false + +examples: + - | + usb-phy@c0000000 { + compatible = "amlogic,meson-gxbb-usb2-phy"; + reg = <0xc0000000 0x20>; + resets = <&reset_usb_phy>; + clocks = <&clk_usb_general>, <&reset_usb>; + clock-names = "usb_general", "usb"; + phy-supply = <&usb_vbus>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml b/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml new file mode 100644 index 000000000000..3a07285b5470 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (c) 2020 NXP +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/cdns,salvo-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Cadence SALVO PHY + +maintainers: + - Peter Chen <peter.chen@nxp.com> + +properties: + compatible: + enum: + - nxp,salvo-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: salvo_phy_clk + + power-domains: + maxItems: 1 + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - "#phy-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/firmware/imx/rsrc.h> + + usb3phy: usb3-phy@5b160000 { + compatible = "nxp,salvo-phy"; + reg = <0x5b160000 0x40000>; + clocks = <&usb3_lpcg 4>; + clock-names = "salvo_phy_clk"; + power-domains = <&pd IMX_SC_R_USB_2_PHY>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml new file mode 100644 index 000000000000..347d0cdfb80d --- /dev/null +++ b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/intel,combo-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel ComboPhy Subsystem + +maintainers: + - Dilip Kota <eswara.kota@linux.intel.com> + +description: | + Intel Combophy subsystem supports PHYs for PCIe, EMAC and SATA + controllers. A single Combophy provides two PHY instances. + +properties: + $nodename: + pattern: "combophy(@.*|-[0-9a-f])*$" + + compatible: + items: + - const: intel,combophy-lgm + - const: intel,combo-phy + + clocks: + maxItems: 1 + + reg: + items: + - description: ComboPhy core registers + - description: PCIe app core control registers + + reg-names: + items: + - const: core + - const: app + + resets: + maxItems: 4 + + reset-names: + items: + - const: phy + - const: core + - const: iphy0 + - const: iphy1 + + intel,syscfg: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: Chip configuration registers handle and ComboPhy instance id + + intel,hsio: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: HSIO registers handle and ComboPhy instance id on NOC + + intel,aggregation: + type: boolean + description: | + Specify the flag to configure ComboPHY in dual lane mode. + + intel,phy-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Mode of the two phys in ComboPhy. + See dt-bindings/phy/phy.h for values. + + "#phy-cells": + const: 1 + +required: + - compatible + - clocks + - reg + - reg-names + - intel,syscfg + - intel,hsio + - intel,phy-mode + - "#phy-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/phy/phy.h> + combophy@d0a00000 { + compatible = "intel,combophy-lgm", "intel,combo-phy"; + clocks = <&cgu0 1>; + #phy-cells = <1>; + reg = <0xd0a00000 0x40000>, + <0xd0a40000 0x1000>; + reg-names = "core", "app"; + resets = <&rcu0 0x50 6>, + <&rcu0 0x50 17>, + <&rcu0 0x50 23>, + <&rcu0 0x50 24>; + reset-names = "phy", "core", "iphy0", "iphy1"; + intel,syscfg = <&sysconf 0>; + intel,hsio = <&hsiol 0>; + intel,phy-mode = <PHY_TYPE_PCIE>; + intel,aggregation; + }; diff --git a/Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt b/Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt deleted file mode 100644 index 114947e1de3d..000000000000 --- a/Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt +++ /dev/null @@ -1,31 +0,0 @@ -* Amlogic Meson GXL and GXM USB3 PHY and OTG detection binding - -Required properties: -- compatible: Should be "amlogic,meson-gxl-usb3-phy" -- #phys-cells: must be 0 (see phy-bindings.txt in this directory) -- reg: The base address and length of the registers -- interrupts: the interrupt specifier for the OTG detection -- clocks: phandles to the clocks for - - the USB3 PHY - - and peripheral mode/OTG detection -- clock-names: must contain "phy" and "peripheral" -- resets: phandle to the reset lines for: - - the USB3 PHY and - - peripheral mode/OTG detection -- reset-names: must contain "phy" and "peripheral" - -Optional properties: -- phy-supply: see phy-bindings.txt in this directory - - -Example: - usb3_phy0: phy@78080 { - compatible = "amlogic,meson-gxl-usb3-phy"; - #phy-cells = <0>; - reg = <0x0 0x78080 0x0 0x20>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkc CLKID_USB_OTG>, <&clkc_AO CLKID_AO_CEC_32K>; - clock-names = "phy", "peripheral"; - resets = <&reset RESET_USB_OTG>, <&reset RESET_USB_OTG>; - reset-names = "phy", "peripheral"; - }; diff --git a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt deleted file mode 100644 index d81d73aea608..000000000000 --- a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt +++ /dev/null @@ -1,28 +0,0 @@ -* Amlogic Meson8, Meson8b and GXBB USB2 PHY - -Required properties: -- compatible: Depending on the platform this should be one of: - "amlogic,meson8-usb2-phy" - "amlogic,meson8b-usb2-phy" - "amlogic,meson-gxbb-usb2-phy" -- reg: The base address and length of the registers -- #phys-cells: should be 0 (see phy-bindings.txt in this directory) -- clocks: phandle and clock identifier for the phy clocks -- clock-names: "usb_general" and "usb" - -Optional properties: -- resets: reference to the reset controller -- phy-supply: see phy-bindings.txt in this directory - - -Example: - -usb0_phy: usb-phy@c0000000 { - compatible = "amlogic,meson-gxbb-usb2-phy"; - #phy-cells = <0>; - reg = <0x0 0xc0000000 0x0 0x20>; - resets = <&reset RESET_USB_OTG>; - clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>; - clock-names = "usb_general", "usb"; - phy-supply = <&usb_vbus>; -}; diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml new file mode 100644 index 000000000000..973b2d196f46 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml @@ -0,0 +1,313 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/qcom,qmp-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm QMP PHY controller + +maintainers: + - Manu Gautam <mgautam@codeaurora.org> + +description: + QMP phy controller supports physical layer functionality for a number of + controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB. + +properties: + compatible: + enum: + - qcom,ipq8074-qmp-pcie-phy + - qcom,msm8996-qmp-pcie-phy + - qcom,msm8996-qmp-ufs-phy + - qcom,msm8996-qmp-usb3-phy + - qcom,msm8998-qmp-pcie-phy + - qcom,msm8998-qmp-ufs-phy + - qcom,msm8998-qmp-usb3-phy + - qcom,sdm845-qhp-pcie-phy + - qcom,sdm845-qmp-pcie-phy + - qcom,sdm845-qmp-ufs-phy + - qcom,sdm845-qmp-usb3-uni-phy + - qcom,sm8150-qmp-ufs-phy + - qcom,sm8250-qmp-ufs-phy + + reg: + items: + - description: Address and length of PHY's common serdes block. + + "#clock-cells": + enum: [ 1, 2 ] + + "#address-cells": + enum: [ 1, 2 ] + + "#size-cells": + enum: [ 1, 2 ] + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 + + resets: + minItems: 1 + maxItems: 3 + + reset-names: + minItems: 1 + maxItems: 3 + + vdda-phy-supply: + description: + Phandle to a regulator supply to PHY core block. + + vdda-pll-supply: + description: + Phandle to 1.8V regulator supply to PHY refclk pll block. + + vddp-ref-clk-supply: + description: + Phandle to a regulator supply to any specific refclk + pll block. + +#Required nodes: +patternProperties: + "^phy@[0-9a-f]+$": + type: object + description: + Each device node of QMP phy is required to have as many child nodes as + the number of lanes the PHY has. + +required: + - compatible + - reg + - "#clock-cells" + - "#address-cells" + - "#size-cells" + - clocks + - clock-names + - resets + - reset-names + - vdda-phy-supply + - vdda-pll-supply + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,sdm845-qmp-usb3-uni-phy + then: + properties: + clocks: + items: + - description: Phy aux clock. + - description: Phy config clock. + - description: 19.2 MHz ref clk. + - description: Phy common block aux clock. + clock-names: + items: + - const: aux + - const: cfg_ahb + - const: ref + - const: com_aux + resets: + items: + - description: reset of phy block. + - description: phy common block reset. + reset-names: + items: + - const: phy + - const: common + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8996-qmp-pcie-phy + then: + properties: + clocks: + items: + - description: Phy aux clock. + - description: Phy config clock. + - description: 19.2 MHz ref clk. + clock-names: + items: + - const: aux + - const: cfg_ahb + - const: ref + resets: + items: + - description: reset of phy block. + - description: phy common block reset. + - description: phy's ahb cfg block reset. + reset-names: + items: + - const: phy + - const: common + - const: cfg + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8996-qmp-usb3-phy + - qcom,msm8998-qmp-pcie-phy + - qcom,msm8998-qmp-usb3-phy + then: + properties: + clocks: + items: + - description: Phy aux clock. + - description: Phy config clock. + - description: 19.2 MHz ref clk. + clock-names: + items: + - const: aux + - const: cfg_ahb + - const: ref + resets: + items: + - description: reset of phy block. + - description: phy common block reset. + reset-names: + items: + - const: phy + - const: common + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8996-qmp-ufs-phy + then: + properties: + clocks: + items: + - description: 19.2 MHz ref clk. + clock-names: + items: + - const: ref + resets: + items: + - description: PHY reset in the UFS controller. + reset-names: + items: + - const: ufsphy + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8998-qmp-ufs-phy + - qcom,sdm845-qmp-ufs-phy + - qcom,sm8150-qmp-ufs-phy + - qcom,sm8250-qmp-ufs-phy + then: + properties: + clocks: + items: + - description: 19.2 MHz ref clk. + - description: Phy reference aux clock. + clock-names: + items: + - const: ref + - const: ref_aux + resets: + items: + - description: PHY reset in the UFS controller. + reset-names: + items: + - const: ufsphy + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq8074-qmp-pcie-phy + then: + properties: + clocks: + items: + - description: pipe clk. + clock-names: + items: + - const: pipe_clk + resets: + items: + - description: reset of phy block. + - description: phy common block reset. + reset-names: + items: + - const: phy + - const: common + - if: + properties: + compatible: + contains: + enum: + - qcom,sdm845-qhp-pcie-phy + - qcom,sdm845-qmp-pcie-phy + then: + properties: + clocks: + items: + - description: Phy aux clock. + - description: Phy config clock. + - description: 19.2 MHz ref clk. + - description: Phy refgen clk. + clock-names: + items: + - const: aux + - const: cfg_ahb + - const: ref + - const: refgen + resets: + items: + - description: reset of phy block. + reset-names: + items: + - const: phy + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + usb_2_qmpphy: phy-wrapper@88eb000 { + compatible = "qcom,sdm845-qmp-usb3-uni-phy"; + reg = <0 0x088eb000 0 0x18c>; + #clock-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK >, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + + resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, + <&gcc GCC_USB3_PHY_SEC_BCR>; + reset-names = "phy", "common"; + + vdda-phy-supply = <&vdda_usb2_ss_1p2>; + vdda-pll-supply = <&vdda_usb2_ss_core>; + + usb_2_ssphy: phy@88eb200 { + reg = <0 0x088eb200 0 0x128>, + <0 0x088eb400 0 0x1fc>, + <0 0x088eb800 0 0x218>, + <0 0x088eb600 0 0x70>; + #clock-cells = <0>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml new file mode 100644 index 000000000000..b770e637df1d --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml @@ -0,0 +1,136 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/qcom,qmp-usb3-dp-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm QMP USB3 DP PHY controller + +maintainers: + - Manu Gautam <mgautam@codeaurora.org> + +properties: + compatible: + enum: + - qcom,sc7180-qmp-usb3-phy + - qcom,sdm845-qmp-usb3-phy + reg: + items: + - description: Address and length of PHY's common serdes block. + - description: Address and length of the DP_COM control block. + + reg-names: + items: + - const: reg-base + - const: dp_com + + "#clock-cells": + enum: [ 1, 2 ] + + "#address-cells": + enum: [ 1, 2 ] + + "#size-cells": + enum: [ 1, 2 ] + + clocks: + items: + - description: Phy aux clock. + - description: Phy config clock. + - description: 19.2 MHz ref clk. + - description: Phy common block aux clock. + + clock-names: + items: + - const: aux + - const: cfg_ahb + - const: ref + - const: com_aux + + resets: + items: + - description: reset of phy block. + - description: phy common block reset. + + reset-names: + items: + - const: phy + - const: common + + vdda-phy-supply: + description: + Phandle to a regulator supply to PHY core block. + + vdda-pll-supply: + description: + Phandle to 1.8V regulator supply to PHY refclk pll block. + + vddp-ref-clk-supply: + description: + Phandle to a regulator supply to any specific refclk + pll block. + +#Required nodes: +patternProperties: + "^phy@[0-9a-f]+$": + type: object + description: + Each device node of QMP phy is required to have as many child nodes as + the number of lanes the PHY has. + +required: + - compatible + - reg + - reg-names + - "#clock-cells" + - "#address-cells" + - "#size-cells" + - clocks + - clock-names + - resets + - reset-names + - vdda-phy-supply + - vdda-pll-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + usb_1_qmpphy: phy-wrapper@88e9000 { + compatible = "qcom,sdm845-qmp-usb3-phy"; + reg = <0 0x088e9000 0 0x18c>, + <0 0x088e8000 0 0x10>; + reg-names = "reg-base", "dp_com"; + #clock-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + vdda-phy-supply = <&vdda_usb2_ss_1p2>; + vdda-pll-supply = <&vdda_usb2_ss_core>; + + usb_1_ssphy: phy@88e9200 { + reg = <0 0x088e9200 0 0x128>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x218>, + <0 0x088e9600 0 0x128>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; + #clock-cells = <0>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml new file mode 100644 index 000000000000..574f890fab1d --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/qcom,usb-snps-femto-v2.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Synopsys Femto High-Speed USB PHY V2 + +maintainers: + - Wesley Cheng <wcheng@codeaurora.org> + +description: | + Qualcomm High-Speed USB PHY + +properties: + compatible: + enum: + - qcom,usb-snps-hs-7nm-phy + - qcom,sm8150-usb-hs-phy + - qcom,usb-snps-femto-v2-phy + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + clocks: + items: + - description: rpmhcc ref clock + + clock-names: + items: + - const: ref + + resets: + items: + - description: PHY core reset + + vdda-pll-supply: + description: phandle to the regulator VDD supply node. + + vdda18-supply: + description: phandle to the regulator 1.8V supply node. + + vdda33-supply: + description: phandle to the regulator 3.3V supply node. + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - resets + - vdda-pll-supply + - vdda18-supply + - vdda33-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/clock/qcom,gcc-sm8150.h> + phy@88e2000 { + compatible = "qcom,sm8150-usb-hs-phy"; + reg = <0 0x088e2000 0 0x400>; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + vdda-pll-supply = <&vdd_usb_hs_core>; + vdda33-supply = <&vdda_usb_hs_3p1>; + vdda18-supply = <&vdda_usb_hs_1p8>; + }; +... diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt deleted file mode 100644 index 54d6f8d43508..000000000000 --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt +++ /dev/null @@ -1,242 +0,0 @@ -Qualcomm QMP PHY controller -=========================== - -QMP phy controller supports physical layer functionality for a number of -controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB. - -Required properties: - - compatible: compatible list, contains: - "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074 - "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996, - "qcom,msm8996-qmp-ufs-phy" for 14nm UFS phy on msm8996, - "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996, - "qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998, - "qcom,msm8998-qmp-ufs-phy" for UFS QMP phy on msm8998, - "qcom,msm8998-qmp-pcie-phy" for PCIe QMP phy on msm8998, - "qcom,sdm845-qhp-pcie-phy" for QHP PCIe phy on sdm845, - "qcom,sdm845-qmp-pcie-phy" for QMP PCIe phy on sdm845, - "qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845, - "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845, - "qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845, - "qcom,sm8150-qmp-ufs-phy" for UFS QMP phy on sm8150. - -- reg: - - index 0: address and length of register set for PHY's common - serdes block. - - index 1: address and length of the DP_COM control block (for - "qcom,sdm845-qmp-usb3-phy" only). - -- reg-names: - - For "qcom,sdm845-qmp-usb3-phy": - - Should be: "reg-base", "dp_com" - - For all others: - - The reg-names property shouldn't be defined. - - - #address-cells: must be 1 - - #size-cells: must be 1 - - ranges: must be present - - - clocks: a list of phandles and clock-specifier pairs, - one for each entry in clock-names. - - clock-names: "cfg_ahb" for phy config clock, - "aux" for phy aux clock, - "ref" for 19.2 MHz ref clk, - "com_aux" for phy common block aux clock, - "ref_aux" for phy reference aux clock, - - For "qcom,ipq8074-qmp-pcie-phy": no clocks are listed. - For "qcom,msm8996-qmp-pcie-phy" must contain: - "aux", "cfg_ahb", "ref". - For "qcom,msm8996-qmp-ufs-phy" must contain: - "ref". - For "qcom,msm8996-qmp-usb3-phy" must contain: - "aux", "cfg_ahb", "ref". - For "qcom,msm8998-qmp-usb3-phy" must contain: - "aux", "cfg_ahb", "ref". - For "qcom,msm8998-qmp-ufs-phy" must contain: - "ref", "ref_aux". - For "qcom,msm8998-qmp-pcie-phy" must contain: - "aux", "cfg_ahb", "ref". - For "qcom,sdm845-qhp-pcie-phy" must contain: - "aux", "cfg_ahb", "ref", "refgen". - For "qcom,sdm845-qmp-pcie-phy" must contain: - "aux", "cfg_ahb", "ref", "refgen". - For "qcom,sdm845-qmp-usb3-phy" must contain: - "aux", "cfg_ahb", "ref", "com_aux". - For "qcom,sdm845-qmp-usb3-uni-phy" must contain: - "aux", "cfg_ahb", "ref", "com_aux". - For "qcom,sdm845-qmp-ufs-phy" must contain: - "ref", "ref_aux". - For "qcom,sm8150-qmp-ufs-phy" must contain: - "ref", "ref_aux". - - - resets: a list of phandles and reset controller specifier pairs, - one for each entry in reset-names. - - reset-names: "phy" for reset of phy block, - "common" for phy common block reset, - "cfg" for phy's ahb cfg block reset, - "ufsphy" for the PHY reset in the UFS controller. - - For "qcom,ipq8074-qmp-pcie-phy" must contain: - "phy", "common". - For "qcom,msm8996-qmp-pcie-phy" must contain: - "phy", "common", "cfg". - For "qcom,msm8996-qmp-ufs-phy": must contain: - "ufsphy". - For "qcom,msm8996-qmp-usb3-phy" must contain - "phy", "common". - For "qcom,msm8998-qmp-usb3-phy" must contain - "phy", "common". - For "qcom,msm8998-qmp-ufs-phy": must contain: - "ufsphy". - For "qcom,msm8998-qmp-pcie-phy" must contain: - "phy", "common". - For "qcom,sdm845-qhp-pcie-phy" must contain: - "phy". - For "qcom,sdm845-qmp-pcie-phy" must contain: - "phy". - For "qcom,sdm845-qmp-usb3-phy" must contain: - "phy", "common". - For "qcom,sdm845-qmp-usb3-uni-phy" must contain: - "phy", "common". - For "qcom,sdm845-qmp-ufs-phy": must contain: - "ufsphy". - For "qcom,sm8150-qmp-ufs-phy": must contain: - "ufsphy". - - - vdda-phy-supply: Phandle to a regulator supply to PHY core block. - - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block. - -Optional properties: - - vddp-ref-clk-supply: Phandle to a regulator supply to any specific refclk - pll block. - -Required nodes: - - Each device node of QMP phy is required to have as many child nodes as - the number of lanes the PHY has. - -Required properties for child nodes of PCIe PHYs (one child per lane): - - reg: list of offset and length pairs of register sets for PHY blocks - - tx, rx, pcs, and pcs_misc (optional). - - #phy-cells: must be 0 - -Required properties for a single "lanes" child node of non-PCIe PHYs: - - reg: list of offset and length pairs of register sets for PHY blocks - For 1-lane devices: - tx, rx, pcs, and (optionally) pcs_misc - For 2-lane devices: - tx0, rx0, pcs, tx1, rx1, and (optionally) pcs_misc - - #phy-cells: must be 0 - -Required properties for child node of PCIe and USB3 qmp phys: - - clocks: a list of phandles and clock-specifier pairs, - one for each entry in clock-names. - - clock-names: Must contain following: - "pipe<lane-number>" for pipe clock specific to each lane. - - clock-output-names: Name of the PHY clock that will be the parent for - the above pipe clock. - For "qcom,ipq8074-qmp-pcie-phy": - - "pcie20_phy0_pipe_clk" Pipe Clock parent - (or) - "pcie20_phy1_pipe_clk" - - #clock-cells: must be 0 - - Phy pll outputs pipe clocks for pipe based PHYs. These clocks are then - gate-controlled by the gcc. - -Required properties for child node of PHYs with lane reset, AKA: - "qcom,msm8996-qmp-pcie-phy" - - resets: a list of phandles and reset controller specifier pairs, - one for each entry in reset-names. - - reset-names: Must contain following: - "lane<lane-number>" for reset specific to each lane. - -Example: - phy@34000 { - compatible = "qcom,msm8996-qmp-pcie-phy"; - reg = <0x34000 0x488>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, - <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>, - <&gcc GCC_PCIE_CLKREF_CLK>; - clock-names = "aux", "cfg_ahb", "ref"; - - vdda-phy-supply = <&pm8994_l28>; - vdda-pll-supply = <&pm8994_l12>; - - resets = <&gcc GCC_PCIE_PHY_BCR>, - <&gcc GCC_PCIE_PHY_COM_BCR>, - <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>; - reset-names = "phy", "common", "cfg"; - - pciephy_0: lane@35000 { - reg = <0x35000 0x130>, - <0x35200 0x200>, - <0x35400 0x1dc>; - #clock-cells = <0>; - #phy-cells = <0>; - - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "pcie_0_pipe_clk_src"; - resets = <&gcc GCC_PCIE_0_PHY_BCR>; - reset-names = "lane0"; - }; - - pciephy_1: lane@36000 { - ... - ... - }; - - phy@88eb000 { - compatible = "qcom,sdm845-qmp-usb3-uni-phy"; - reg = <0x88eb000 0x18c>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, - <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_USB3_SEC_CLKREF_CLK>, - <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "com_aux"; - - resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, - <&gcc GCC_USB3_PHY_SEC_BCR>; - reset-names = "phy", "common"; - - lane@88eb200 { - reg = <0x88eb200 0x128>, - <0x88eb400 0x1fc>, - <0x88eb800 0x218>, - <0x88eb600 0x70>; - #clock-cells = <0>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_uni_phy_pipe_clk_src"; - }; - }; - - phy@1d87000 { - compatible = "qcom,sdm845-qmp-ufs-phy"; - reg = <0x1d87000 0x18c>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clock-names = "ref", - "ref_aux"; - clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; - - lanes@1d87400 { - reg = <0x1d87400 0x108>, - <0x1d87600 0x1e0>, - <0x1d87c00 0x1dc>, - <0x1d87800 0x108>, - <0x1d87a00 0x1e0>; - #phy-cells = <0>; - }; - }; diff --git a/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml b/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml new file mode 100644 index 000000000000..1118fe69b611 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/qcom-usb-ipq4019-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcom IPQ40xx Dakota HS/SS USB PHY + +maintainers: + - Robert Marko <robert.marko@sartura.hr> + +properties: + compatible: + enum: + - qcom,usb-ss-ipq4019-phy + - qcom,usb-hs-ipq4019-phy + + reg: + maxItems: 1 + + resets: + maxItems: 2 + + reset-names: + items: + - const: por_rst + - const: srif_rst + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - resets + - reset-names + - "#phy-cells" + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-ipq4019.h> + + hsphy@a8000 { + #phy-cells = <0>; + compatible = "qcom,usb-hs-ipq4019-phy"; + reg = <0xa8000 0x40>; + resets = <&gcc USB2_HSPHY_POR_ARES>, + <&gcc USB2_HSPHY_S_ARES>; + reset-names = "por_rst", "srif_rst"; + }; diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt deleted file mode 100644 index 7734b219d9aa..000000000000 --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt +++ /dev/null @@ -1,70 +0,0 @@ -* Renesas R-Car generation 3 USB 2.0 PHY - -This file provides information on what the device node for the R-Car generation -3, RZ/G1C, RZ/G2 and RZ/A2 USB 2.0 PHY contain. - -Required properties: -- compatible: "renesas,usb2-phy-r7s9210" if the device is a part of an R7S9210 - SoC. - "renesas,usb2-phy-r8a77470" if the device is a part of an R8A77470 - SoC. - "renesas,usb2-phy-r8a774a1" if the device is a part of an R8A774A1 - SoC. - "renesas,usb2-phy-r8a774b1" if the device is a part of an R8A774B1 - SoC. - "renesas,usb2-phy-r8a774c0" if the device is a part of an R8A774C0 - SoC. - "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795 - SoC. - "renesas,usb2-phy-r8a7796" if the device is a part of an R8A7796 - SoC. - "renesas,usb2-phy-r8a77965" if the device is a part of an - R8A77965 SoC. - "renesas,usb2-phy-r8a77990" if the device is a part of an - R8A77990 SoC. - "renesas,usb2-phy-r8a77995" if the device is a part of an - R8A77995 SoC. - "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3, RZ/G2 or - RZ/A2 compatible device. - - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first - followed by the generic version. - -- reg: offset and length of the partial USB 2.0 Host register block. -- clocks: clock phandle and specifier pair(s). -- #phy-cells: see phy-bindings.txt in the same directory, must be <1> (and - using <0> is deprecated). - -The phandle's argument in the PHY specifier is the INT_STATUS bit of controller: -- 1 = USBH_INTA (OHCI) -- 2 = USBH_INTB (EHCI) -- 3 = UCOM_INT (OTG and BC) - -Optional properties: -To use a USB channel where USB 2.0 Host and HSUSB (USB 2.0 Peripheral) are -combined, the device tree node should set interrupt properties to use the -channel as USB OTG: -- interrupts: interrupt specifier for the PHY. -- vbus-supply: Phandle to a regulator that provides power to the VBUS. This - regulator will be managed during the PHY power on/off sequence. -- renesas,no-otg-pins: boolean, specify when a board does not provide proper - otg pins. -- dr_mode: string, indicates the working mode for the PHY. Can be "host", - "peripheral", or "otg". Should be set if otg controller is not used. - - -Example (R-Car H3): - - usb-phy@ee080200 { - compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy"; - reg = <0 0xee080200 0 0x700>; - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; - }; - - usb-phy@ee0a0200 { - compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy"; - reg = <0 0xee0a0200 0 0x700>; - clocks = <&cpg CPG_MOD 702>; - }; diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt deleted file mode 100644 index 0fe433b9a592..000000000000 --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt +++ /dev/null @@ -1,52 +0,0 @@ -* Renesas R-Car generation 3 USB 3.0 PHY - -This file provides information on what the device node for the R-Car generation -3 and RZ/G2 USB 3.0 PHY contain. -If you want to enable spread spectrum clock (ssc), you should use USB_EXTAL -instead of USB3_CLK. However, if you don't want to these features, you don't -need this driver. - -Required properties: -- compatible: "renesas,r8a774a1-usb3-phy" if the device is a part of an R8A774A1 - SoC. - "renesas,r8a774b1-usb3-phy" if the device is a part of an R8A774B1 - SoC. - "renesas,r8a7795-usb3-phy" if the device is a part of an R8A7795 - SoC. - "renesas,r8a7796-usb3-phy" if the device is a part of an R8A7796 - SoC. - "renesas,r8a77965-usb3-phy" if the device is a part of an - R8A77965 SoC. - "renesas,rcar-gen3-usb3-phy" for a generic R-Car Gen3 or RZ/G2 - compatible device. - - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first - followed by the generic version. - -- reg: offset and length of the USB 3.0 PHY register block. -- clocks: A list of phandles and clock-specifier pairs. -- clock-names: Name of the clocks. - - The funcional clock must be "usb3-if". - - The usb3's external clock must be "usb3s_clk". - - The usb2's external clock must be "usb_extal". If you want to use the ssc, - the clock-frequency must not be 0. -- #phy-cells: see phy-bindings.txt in the same directory, must be <0>. - -Optional properties: -- renesas,ssc-range: Enable/disable spread spectrum clock (ssc) by using - the following values as u32: - - 0 (or the property doesn't exist): disable the ssc - - 4980: enable the ssc as -4980 ppm - - 4492: enable the ssc as -4492 ppm - - 4003: enable the ssc as -4003 ppm - -Example (R-Car H3): - - usb-phy@e65ee000 { - compatible = "renesas,r8a7795-usb3-phy", - "renesas,rcar-gen3-usb3-phy"; - reg = <0 0xe65ee000 0 0x90>; - clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, <&usb_extal>; - clock-names = "usb3-if", "usb3s_clk", "usb_extal"; - }; diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml new file mode 100644 index 000000000000..440f09fddf93 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/renesas,usb2-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car generation 3 USB 2.0 PHY + +maintainers: + - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> + +properties: + compatible: + oneOf: + - items: + - const: renesas,usb2-phy-r8a77470 # RZ/G1C + + - items: + - enum: + - renesas,usb2-phy-r7s9210 # RZ/A2 + - renesas,usb2-phy-r8a774a1 # RZ/G2M + - renesas,usb2-phy-r8a774b1 # RZ/G2N + - renesas,usb2-phy-r8a774c0 # RZ/G2E + - renesas,usb2-phy-r8a7795 # R-Car H3 + - renesas,usb2-phy-r8a7796 # R-Car M3-W + - renesas,usb2-phy-r8a77961 # R-Car M3-W+ + - renesas,usb2-phy-r8a77965 # R-Car M3-N + - renesas,usb2-phy-r8a77990 # R-Car E3 + - renesas,usb2-phy-r8a77995 # R-Car D3 + - const: renesas,rcar-gen3-usb2-phy + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + items: + - const: fck + - const: usb_x1 + + '#phy-cells': + enum: [0, 1] # and 0 is deprecated. + description: | + The phandle's argument in the PHY specifier is the INT_STATUS bit of + controller. + - 1 = USBH_INTA (OHCI) + - 2 = USBH_INTB (EHCI) + - 3 = UCOM_INT (OTG and BC) + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + minItems: 1 + maxItems: 2 + items: + - description: reset of USB 2.0 host side + - description: reset of USB 2.0 peripheral side + + vbus-supply: + description: | + Phandle to a regulator that provides power to the VBUS. This regulator + will be managed during the PHY power on/off sequence. + + renesas,no-otg-pins: + $ref: /schemas/types.yaml#/definitions/flag + description: | + specify when a board does not provide proper otg pins. + + dr_mode: true + +if: + properties: + compatible: + items: + enum: + - renesas,usb2-phy-r7s9210 +then: + required: + - clock-names + +required: + - compatible + - reg + - clocks + - '#phy-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7795-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + usb-phy@ee080200 { + compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy"; + reg = <0xee080200 0x700>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + #phy-cells = <1>; + }; + + usb-phy@ee0a0200 { + compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy"; + reg = <0xee0a0200 0x700>; + clocks = <&cpg CPG_MOD 702>; + #phy-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml new file mode 100644 index 000000000000..f459eaf55278 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/renesas,usb3-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car generation 3 USB 3.0 PHY + +maintainers: + - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> + +properties: + compatible: + items: + - enum: + - renesas,r8a774a1-usb3-phy # RZ/G2M + - renesas,r8a774b1-usb3-phy # RZ/G2N + - renesas,r8a7795-usb3-phy # R-Car H3 + - renesas,r8a7796-usb3-phy # R-Car M3-W + - renesas,r8a77961-usb3-phy # R-Car M3-W+ + - renesas,r8a77965-usb3-phy # R-Car M3-N + - const: renesas,rcar-gen3-usb3-phy + + reg: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 3 + + clock-names: + # If you want to use the ssc, the clock-frequency of usb_extal + # must not be 0. + minItems: 2 + maxItems: 3 + items: + - const: usb3-if # The funcional clock + - const: usb3s_clk # The usb3's external clock + - const: usb_extal # The usb2's external clock + + '#phy-cells': + # see phy-bindings.txt in the same directory + const: 0 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + renesas,ssc-range: + description: | + Enable/disable spread spectrum clock (ssc). 0 or the property doesn't + exist means disabling the ssc. The actual value will be -<value> ppm. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 0, 4003, 4492, 4980 ] + +required: + - compatible + - reg + - clocks + - clock-names + - '#phy-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7795-cpg-mssr.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + usb-phy@e65ee000 { + compatible = "renesas,r8a7795-usb3-phy", "renesas,rcar-gen3-usb3-phy"; + reg = <0xe65ee000 0x90>; + clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, <&usb_extal>; + clock-names = "usb3-if", "usb3s_clk", "usb_extal"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt b/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt deleted file mode 100644 index 9a8b631904fd..000000000000 --- a/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt +++ /dev/null @@ -1,42 +0,0 @@ -Amlogic Meson GX DWC3 USB SoC controller - -Required properties: -- compatible: depending on the SoC this should contain one of: - * amlogic,meson-axg-dwc3 - * amlogic,meson-gxl-dwc3 -- clocks: a handle for the "USB general" clock -- clock-names: must be "usb_general" -- resets: a handle for the shared "USB OTG" reset line -- reset-names: must be "usb_otg" - -Required child node: -A child node must exist to represent the core DWC3 IP block. The name of -the node is not important. The content of the node is defined in dwc3.txt. - -PHY documentation is provided in the following places: -- Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt -- Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt - -Example device nodes: - usb0: usb@ff500000 { - compatible = "amlogic,meson-axg-dwc3"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks = <&clkc CLKID_USB>; - clock-names = "usb_general"; - resets = <&reset RESET_USB_OTG>; - reset-names = "usb_otg"; - - dwc3: dwc3@ff500000 { - compatible = "snps,dwc3"; - reg = <0x0 0xff500000 0x0 0x100000>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - dr_mode = "host"; - maximum-speed = "high-speed"; - snps,dis_u2_susphy_quirk; - phys = <&usb3_phy>, <&usb2_phy0>; - phy-names = "usb2-phy", "usb3-phy"; - }; - }; diff --git a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml index f6d48f4a0116..5b04a7dfa018 100644 --- a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml +++ b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml @@ -25,9 +25,13 @@ description: | The Amlogic A1 embeds a DWC3 USB IP Core configured for USB2 in host-only mode. + The Amlogic GXL & GXM SoCs doesn't embed an USB3 PHY. + properties: compatible: enum: + - amlogic,meson-gxl-usb-ctrl + - amlogic,meson-gxm-usb-ctrl - amlogic,meson-g12a-usb-ctrl - amlogic,meson-a1-usb-ctrl @@ -41,6 +45,11 @@ properties: clocks: minItems: 1 + maxItems: 3 + + clock-names: + minItems: 1 + maxItems: 3 resets: minItems: 1 @@ -52,10 +61,8 @@ properties: maxItems: 1 phy-names: - items: - - const: usb2-phy0 # USB2 PHY0 if USBHOST_A port is used - - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used - - const: usb3-phy0 # USB3 PHY if USB3_0 is used + minItems: 1 + maxItems: 3 phys: minItems: 1 @@ -93,10 +100,68 @@ allOf: properties: compatible: enum: + - amlogic,meson-g12a-usb-ctrl + + then: + properties: + phy-names: + items: + - const: usb2-phy0 # USB2 PHY0 if USBHOST_A port is used + - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used + - const: usb3-phy0 # USB3 PHY if USB3_0 is used + - if: + properties: + compatible: + enum: + - amlogic,meson-gxl-usb-ctrl + + then: + properties: + clocks: + minItems: 2 + clock-names: + items: + - const: usb_ctrl + - const: ddr + phy-names: + items: + - const: usb2-phy0 # USB2 PHY0 if USBHOST_A port is used + - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used + required: + - clock-names + - if: + properties: + compatible: + enum: + - amlogic,meson-gxm-usb-ctrl + + then: + properties: + clocks: + minItems: 2 + clock-names: + items: + - const: usb_ctrl + - const: ddr + phy-names: + items: + - const: usb2-phy0 # USB2 PHY0 if USBHOST_A port is used + - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used + - const: usb2-phy2 # USB2 PHY2 if USBOTG_C port is used + + required: + - clock-names + - if: + properties: + compatible: + enum: - amlogic,meson-a1-usb-ctrl then: properties: + phy-names: + items: + - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used clocks: minItems: 3 clock-names: diff --git a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml index 297fb77a5454..ccc67d03d4bb 100644 --- a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml +++ b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml @@ -50,6 +50,59 @@ properties: minimum: 1 maximum: 21 + vhub-vendor-id: + description: vhub Vendor ID + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - maximum: 65535 + + vhub-product-id: + description: vhub Product ID + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - maximum: 65535 + + vhub-device-revision: + description: vhub Device Revision in binary-coded decimal + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - maximum: 65535 + + vhub-strings: + type: object + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + patternProperties: + '^string@[0-9a-f]+$': + type: object + description: string descriptors of the specific language + + properties: + reg: + maxItems: 1 + description: 16-bit Language Identifier defined by USB-IF + + manufacturer: + description: vhub manufacturer + allOf: + - $ref: /schemas/types.yaml#/definitions/string + + product: + description: vhub product name + allOf: + - $ref: /schemas/types.yaml#/definitions/string + + serial-number: + description: vhub device serial number + allOf: + - $ref: /schemas/types.yaml#/definitions/string + required: - compatible - reg @@ -72,4 +125,19 @@ examples: aspeed,vhub-generic-endpoints = <15>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb2ad_default>; + + vhub-vendor-id = <0x1d6b>; + vhub-product-id = <0x0107>; + vhub-device-revision = <0x0100>; + vhub-strings { + #address-cells = <1>; + #size-cells = <0>; + + string@0409 { + reg = <0x0409>; + manufacturer = "ASPEED"; + product = "USB Virtual Hub"; + serial-number = "0000"; + }; + }; }; diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt index 44e80153b148..423b99a8fd97 100644 --- a/Documentation/devicetree/bindings/usb/atmel-usb.txt +++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt @@ -88,13 +88,15 @@ Required properties: - clock-names: Should contain two strings "pclk" for the peripheral clock "hclk" for the host clock + +Deprecated property: - ep childnode: To specify the number of endpoints and their properties. Optional properties: - atmel,vbus-gpio: If present, specifies a gpio that allows to detect whether vbus is present (USB is connected). -Required child node properties: +Deprecated child node properties: - name: Name of the endpoint. - reg: Num of the endpoint. - atmel,fifo-size: Size of the fifo. @@ -112,56 +114,4 @@ usb2: gadget@fff78000 { clocks = <&utmi>, <&udphs_clk>; clock-names = "hclk", "pclk"; atmel,vbus-gpio = <&pioB 19 0>; - - ep@0 { - reg = <0>; - atmel,fifo-size = <64>; - atmel,nb-banks = <1>; - }; - - ep@1 { - reg = <1>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@2 { - reg = <2>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@3 { - reg = <3>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - }; - - ep@4 { - reg = <4>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - }; - - ep@5 { - reg = <5>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@6 { - reg = <6>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; }; diff --git a/Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml b/Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml new file mode 100644 index 000000000000..2a9acf2b5a64 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/brcm,bcm7445-ehci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom STB USB EHCI Controller Device Tree Bindings + +allOf: + - $ref: "usb-hcd.yaml" + +maintainers: + - Al Cooper <alcooperx@gmail.com> + +properties: + compatible: + const: brcm,bcm7445-ehci + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + description: Clock specifier for the EHCI clock + + clock-names: + const: sw_usb + + phys: + maxItems: 1 + + phy-names: + const: usbphy + +required: + - compatible + - reg + - interrupts + - phys + - clocks + +additionalProperties: false + +examples: + - | + usb@f0b00300 { + compatible = "brcm,bcm7445-ehci"; + reg = <0xf0b00300 0xa8>; + interrupts = <0x0 0x5a 0x0>; + phys = <&usbphy_0 0x0>; + phy-names = "usbphy"; + clocks = <&usb20>; + clock-names = "sw_usb"; + }; + +... diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index 9946ff9ba735..d03edf9d3935 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -15,8 +15,6 @@ Required properties: Exception for clocks: clocks are optional if the parent node (i.e. glue-layer) is compatible to one of the following: - "amlogic,meson-axg-dwc3" - "amlogic,meson-gxl-dwc3" "cavium,octeon-7130-usb-uctl" "qcom,dwc3" "samsung,exynos5250-dwusb3" diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt deleted file mode 100644 index 77df82e36138..000000000000 --- a/Documentation/devicetree/bindings/usb/keystone-usb.txt +++ /dev/null @@ -1,56 +0,0 @@ -TI Keystone Soc USB Controller - -DWC3 GLUE - -Required properties: - - compatible: should be - "ti,keystone-dwc3" for Keystone 2 SoCs - "ti,am654-dwc3" for AM654 SoC - - #address-cells, #size-cells : should be '1' if the device has sub-nodes - with 'reg' property. - - reg : Address and length of the register set for the USB subsystem on - the SOC. - - interrupts : The irq number of this device that is used to interrupt the - MPU. - - ranges: allows valid 1:1 translation between child's address space and - parent's address space. - -SoC-specific Required Properties: -The following are mandatory properties for Keystone 2 66AK2HK, 66AK2L and 66AK2E -SoCs only: - -- clocks: Clock ID for USB functional clock. -- clock-names: Must be "usb". - - -The following are mandatory properties for 66AK2G and AM654: - -- power-domains: Should contain a phandle to a PM domain provider node - and an args specifier containing the USB device id - value. This property is as per the binding, - Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt - -Sub-nodes: -The dwc3 core should be added as subnode to Keystone DWC3 glue. -- dwc3 : - The binding details of dwc3 can be found in: - Documentation/devicetree/bindings/usb/dwc3.txt - -Example: - usb: usb@2680000 { - compatible = "ti,keystone-dwc3"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x2680000 0x10000>; - clocks = <&clkusb>; - clock-names = "usb"; - interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; - ranges; - - dwc3@2690000 { - compatible = "synopsys,dwc3"; - reg = <0x2690000 0x70000>; - interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; - usb-phy = <&usb_phy>, <&usb_phy>; - }; - }; diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml index d814d2db19ee..c4ddc0adf101 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml @@ -21,6 +21,7 @@ properties: - enum: - nvidia,tegra210-xudc # For Tegra210 - nvidia,tegra186-xudc # For Tegra186 + - nvidia,tegra194-xudc # For Tegra194 reg: minItems: 2 @@ -144,6 +145,7 @@ allOf: contains: enum: - nvidia,tegra186-xudc + - nvidia,tegra194-xudc then: properties: reg: diff --git a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml new file mode 100644 index 000000000000..f127535feb0b --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ti,keystone-dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI Keystone Soc USB Controller + +maintainers: + - Roger Quadros <rogerq@ti.com> + +properties: + compatible: + oneOf: + - const: "ti,keystone-dwc3" + - const: "ti,am654-dwc3" + + reg: + maxItems: 1 + description: Address and length of the register set for the USB subsystem on + the SOC. + + interrupts: + maxItems: 1 + description: The irq number of this device that is used to interrupt the MPU. + + + clocks: + description: Clock ID for USB functional clock. + + power-domains: + description: Should contain a phandle to a PM domain provider node + and an args specifier containing the USB device id + value. This property is as per the binding, + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt + + phys: + description: + PHY specifier for the USB3.0 PHY. Some SoCs need the USB3.0 PHY + to be turned on before the controller. + Documentation/devicetree/bindings/phy/phy-bindings.txt + + phy-names: + items: + - const: "usb3-phy" + + dwc3: + description: This is the node representing the DWC3 controller instance + Documentation/devicetree/bindings/usb/dwc3.txt + +required: + - compatible + - reg + - interrupts + - clocks + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + usb: usb@2680000 { + compatible = "ti,keystone-dwc3"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2680000 0x10000>; + clocks = <&clkusb>; + clock-names = "usb"; + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; + ranges; + + dwc3@2690000 { + compatible = "synopsys,dwc3"; + reg = <0x2690000 0x70000>; + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; + usb-phy = <&usb_phy>, <&usb_phy>; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml new file mode 100644 index 000000000000..8eaf4b6c4735 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/usb/ti,tps6598x.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Texas Instruments 6598x Type-C Port Switch and Power Delivery controller DT bindings + +maintainers: + - Bryan O'Donoghue <bryan.odonoghue@linaro.org> + +description: | + Texas Instruments 6598x Type-C Port Switch and Power Delivery controller + +properties: + compatible: + enum: + - ti,tps6598x + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: irq + +required: + - compatible + - reg + - interrupts + - interrupt-names + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + tps6598x: tps6598x@38 { + compatible = "ti,tps6598x"; + reg = <0x38>; + + interrupt-parent = <&msmgpio>; + interrupts = <107 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "irq"; + + pinctrl-names = "default"; + pinctrl-0 = <&typec_pins>; + + typec_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + port { + typec_ep: endpoint { + remote-endpoint = <&otg_ep>; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt index 4473c9898d31..b120dd6612a2 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -25,6 +25,7 @@ Required properties: device - "renesas,rcar-gen3-xhci" for a generic R-Car Gen3 or RZ/G2 compatible device + - "brcm,bcm7445-xhci" for Broadcom STB SoCs with XHCI - "xhci-platform" (deprecated) When compatible with the generic version, nodes must list the diff --git a/Documentation/firmware-guide/acpi/intel-pmc-mux.rst b/Documentation/firmware-guide/acpi/intel-pmc-mux.rst new file mode 100644 index 000000000000..99b86710f02b --- /dev/null +++ b/Documentation/firmware-guide/acpi/intel-pmc-mux.rst @@ -0,0 +1,153 @@ +.. SPDX-License-Identifier: GPL-2.0 + +===================== +Intel North Mux-Agent +===================== + +Introduction +============ + +North Mux-Agent is a function of the Intel PMC firmware that is supported on +most Intel based platforms that have the PMC microcontroller. It's used for +configuring the various USB Multiplexer/DeMultiplexers on the system. The +platforms that allow the mux-agent to be configured from the operating system +have an ACPI device object (node) with HID "INTC105C" that represents it. + +The North Mux-Agent (aka. Intel PMC Mux Control, or just mux-agent) driver +communicates with the PMC microcontroller by using the PMC IPC method +(drivers/platform/x86/intel_scu_ipc.c). The driver registers with the USB Type-C +Mux Class which allows the USB Type-C Controller and Interface drivers to +configure the cable plug orientation and mode (with Alternate Modes). The driver +also registers with the USB Role Class in order to support both USB Host and +Device modes. The driver is located here: drivers/usb/typec/mux/intel_pmc_mux.c. + +Port nodes +========== + +General +------- + +For every USB Type-C connector under the mux-agent control on the system, there +is a separate child node under the PMC mux-agent device node. Those nodes do not +represent the actual connectors, but instead the "channels" in the mux-agent +that are associated with the connectors:: + + Scope (_SB.PCI0.PMC.MUX) + { + Device (CH0) + { + Name (_ADR, 0) + } + + Device (CH1) + { + Name (_ADR, 1) + } + } + +_PLD (Physical Location of Device) +---------------------------------- + +The optional _PLD object can be used with the port (the channel) nodes. If _PLD +is supplied, it should match the connector node _PLD:: + + Scope (_SB.PCI0.PMC.MUX) + { + Device (CH0) + { + Name (_ADR, 0) + Method (_PLD, 0, NotSerialized) + { + /* Consider this as pseudocode. */ + Return (\_SB.USBC.CON0._PLD()) + } + } + } + +Mux-agent specific _DSD Device Properties +----------------------------------------- + +Port Numbers +~~~~~~~~~~~~ + +In order to configure the muxes behind a USB Type-C connector, the PMC firmware +needs to know the USB2 port and the USB3 port that is associated with the +connector. The driver extracts the correct port numbers by reading specific _DSD +device properties named "usb2-port-number" and "usb3-port-number". These +properties have integer value that means the port index. The port index number +is 1's based, and value 0 is illegal. The driver uses the numbers extracted from +these device properties as-is when sending the mux-agent specific messages to +the PMC:: + + Name (_DSD, Package () { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package() { + Package () {"usb2-port-number", 6}, + Package () {"usb3-port-number", 3}, + }, + }) + +Orientation +~~~~~~~~~~~ + +Depending on the platform, the data and SBU lines coming from the connector may +be "fixed" from the mux-agent's point of view, which means the mux-agent driver +should not configure them according to the cable plug orientation. This can +happen for example if a retimer on the platform handles the cable plug +orientation. The driver uses a specific device properties "sbu-orientation" +(SBU) and "hsl-orientation" (data) to know if those lines are "fixed", and to +which orientation. The value that these properties have is a string value, and +it can be one that is defined for the USB Type-C connector orientation: "normal" +or "reversed":: + + Name (_DSD, Package () { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package() { + Package () {"sbu-orientation", "normal"}, + Package () {"hsl-orientation", "normal"}, + }, + }) + +Example ASL +=========== + +The following ASL is an example that shows the mux-agent node, and two +connectors under its control:: + + Scope (_SB.PCI0.PMC) + { + Device (MUX) + { + Name (_HID, "INTC105C") + + Device (CH0) + { + Name (_ADR, 0) + + Name (_DSD, Package () { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package() { + Package () {"usb2-port-number", 6}, + Package () {"usb3-port-number", 3}, + Package () {"sbu-orientation", "normal"}, + Package () {"hsl-orientation", "normal"}, + }, + }) + } + + Device (CH1) + { + Name (_ADR, 1) + + Name (_DSD, Package () { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package() { + Package () {"usb2-port-number", 5}, + Package () {"usb3-port-number", 2}, + Package () {"sbu-orientation", "normal"}, + Package () {"hsl-orientation", "normal"}, + }, + }) + } + } + } |