summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-05-10 01:34:20 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2017-05-10 01:34:20 +0300
commitecc721a72c121e8b641d68efd24a225abedb9a30 (patch)
tree15d514f0c374292218a52dcc24a82d7c55bcfcfc /Documentation
parent28b47809b2171a6cfbab839936b24280639c9f85 (diff)
parent97512ceafaacf8cdb96d6a36ae55e8335c0a9e55 (diff)
downloadlinux-ecc721a72c121e8b641d68efd24a225abedb9a30.tar.xz
Merge tag 'pwm/for-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding: "Adds a new driver for the PWM controller found on MediaTek SoCs and extends support for the Atmel PWM controller to include the SAMA5D2. Some existing drivers have been migrated to the atomic API and a few others see miscellaneous improvements" * tag 'pwm/for-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: tegra: Read PWM clock source rate in driver init pwm: pca9685: Fix GPIO-only operation pwm: mediatek: Don't explicitly set .owner pwm: tegra: Avoid potential overflow for short periods pwm: tegra: Add support to configure pin state in suspends/resume pwm: tegra: Add DT binding details to configure pin in suspends/resume pwm: tegra: Increase precision in PWM rate calculation pwm: tegra: Use DIV_ROUND_CLOSEST_ULL() instead of local implementation pwm: Add MediaTek PWM support dt-bindings: pwm: Add MediaTek PWM bindings pwm: atmel: Enable PWM on sama5d2 pwm: atmel: Switch to atomic PWM pwm: atmel-hlcdc: Implement the suspend/resume hooks pwm: atmel-hlcdc: Convert to the atomic PWM API
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/pwm/atmel-pwm.txt1
-rw-r--r--Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt45
-rw-r--r--Documentation/devicetree/bindings/pwm/pwm-mediatek.txt34
3 files changed, 80 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pwm/atmel-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-pwm.txt
index 02331b904d4e..c8c831d7b0d1 100644
--- a/Documentation/devicetree/bindings/pwm/atmel-pwm.txt
+++ b/Documentation/devicetree/bindings/pwm/atmel-pwm.txt
@@ -4,6 +4,7 @@ Required properties:
- compatible: should be one of:
- "atmel,at91sam9rl-pwm"
- "atmel,sama5d3-pwm"
+ - "atmel,sama5d2-pwm"
- reg: physical base address and length of the controller's registers
- #pwm-cells: Should be 3. See pwm.txt in this directory for a
description of the cells format.
diff --git a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
index b4e73778dda3..c57e11b8d937 100644
--- a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
+++ b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
@@ -19,6 +19,19 @@ Required properties:
- reset-names: Must include the following entries:
- pwm
+Optional properties:
+============================
+In some of the interface like PWM based regulator device, it is required
+to configure the pins differently in different states, especially in suspend
+state of the system. The configuration of pin is provided via the pinctrl
+DT node as detailed in the pinctrl DT binding document
+ Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+The PWM node will have following optional properties.
+pinctrl-names: Pin state names. Must be "default" and "sleep".
+pinctrl-0: phandle for the default/active state of pin configurations.
+pinctrl-1: phandle for the sleep state of pin configurations.
+
Example:
pwm: pwm@7000a000 {
@@ -29,3 +42,35 @@ Example:
resets = <&tegra_car 17>;
reset-names = "pwm";
};
+
+
+Example with the pin configuration for suspend and resume:
+=========================================================
+Suppose pin PE7 (On Tegra210) interfaced with the regulator device and
+it requires PWM output to be tristated when system enters suspend.
+Following will be DT binding to achieve this:
+
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+ pinmux@700008d4 {
+ pwm_active_state: pwm_active_state {
+ pe7 {
+ nvidia,pins = "pe7";
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ };
+
+ pwm_sleep_state: pwm_sleep_state {
+ pe7 {
+ nvidia,pins = "pe7";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+ };
+ };
+
+ pwm@7000a000 {
+ /* Mandatory PWM properties */
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pwm_active_state>;
+ pinctrl-1 = <&pwm_sleep_state>;
+ };
diff --git a/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt b/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt
new file mode 100644
index 000000000000..54c59b0560ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt
@@ -0,0 +1,34 @@
+MediaTek PWM controller
+
+Required properties:
+ - compatible: should be "mediatek,<name>-pwm":
+ - "mediatek,mt7623-pwm": found on mt7623 SoC.
+ - reg: physical base address and length of the controller's registers.
+ - #pwm-cells: must be 2. See pwm.txt in this directory for a description of
+ the cell format.
+ - clocks: phandle and clock specifier of the PWM reference clock.
+ - clock-names: must contain the following:
+ - "top": the top clock generator
+ - "main": clock used by the PWM core
+ - "pwm1-5": the five per PWM clocks
+ - pinctrl-names: Must contain a "default" entry.
+ - pinctrl-0: One property must exist for each entry in pinctrl-names.
+ See pinctrl/pinctrl-bindings.txt for details of the property values.
+
+Example:
+ pwm0: pwm@11006000 {
+ compatible = "mediatek,mt7623-pwm";
+ reg = <0 0x11006000 0 0x1000>;
+ #pwm-cells = <2>;
+ clocks = <&topckgen CLK_TOP_PWM_SEL>,
+ <&pericfg CLK_PERI_PWM>,
+ <&pericfg CLK_PERI_PWM1>,
+ <&pericfg CLK_PERI_PWM2>,
+ <&pericfg CLK_PERI_PWM3>,
+ <&pericfg CLK_PERI_PWM4>,
+ <&pericfg CLK_PERI_PWM5>;
+ clock-names = "top", "main", "pwm1", "pwm2",
+ "pwm3", "pwm4", "pwm5";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pins>;
+ };