summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-09-09 21:05:20 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2017-09-09 21:05:20 +0300
commitfbd01410e89a66f346ba1b3c0161e1198449b746 (patch)
tree1a3cfbb076c8b995e5f6e752c30163532dcbd781 /Documentation
parentfbf4432ff71b7a25bef993a5312906946d27f446 (diff)
parent9beb8bedb05c5f3a353dba62b8fa7cbbb9ec685e (diff)
downloadlinux-fbd01410e89a66f346ba1b3c0161e1198449b746.tar.xz
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller: "The iwlwifi firmware compat fix is in here as well as some other stuff: 1) Fix request socket leak introduced by BPF deadlock fix, from Eric Dumazet. 2) Fix VLAN handling with TXQs in mac80211, from Johannes Berg. 3) Missing __qdisc_drop conversions in prio and qfq schedulers, from Gao Feng. 4) Use after free in netlink nlk groups handling, from Xin Long. 5) Handle MTU update properly in ipv6 gre tunnels, from Xin Long. 6) Fix leak of ipv6 fib tables on netns teardown, from Sabrina Dubroca with follow-on fix from Eric Dumazet. 7) Need RCU and preemption disabled during generic XDP data patch, from John Fastabend" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits) bpf: make error reporting in bpf_warn_invalid_xdp_action more clear Revert "mdio_bus: Remove unneeded gpiod NULL check" bpf: devmap, use cond_resched instead of cpu_relax bpf: add support for sockmap detach programs net: rcu lock and preempt disable missing around generic xdp bpf: don't select potentially stale ri->map from buggy xdp progs net: tulip: Constify tulip_tbl net: ethernet: ti: netcp_core: no need in netif_napi_del davicom: Display proper debug level up to 6 net: phy: sfp: rename dt properties to match the binding dt-binding: net: sfp binding documentation dt-bindings: add SFF vendor prefix dt-bindings: net: don't confuse with generic PHY property ip6_tunnel: fix setting hop_limit value for ipv6 tunnel ip_tunnel: fix setting ttl and tos value in collect_md mode ipv6: fix typo in fib6_net_exit() tcp: fix a request socket leak sctp: fix missing wake ups in some situations netfilter: xt_hashlimit: fix build error caused by 64bit division netfilter: xt_hashlimit: alloc hashtable with right size ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/net/ethernet.txt4
-rw-r--r--Documentation/devicetree/bindings/net/sff,sfp.txt76
-rw-r--r--Documentation/devicetree/bindings/phy/phy-bindings.txt4
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt1
4 files changed, 84 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt
index 7da86f22a13b..2974e63ba311 100644
--- a/Documentation/devicetree/bindings/net/ethernet.txt
+++ b/Documentation/devicetree/bindings/net/ethernet.txt
@@ -1,5 +1,9 @@
The following properties are common to the Ethernet controllers:
+NOTE: All 'phy*' properties documented below are Ethernet specific. For the
+generic PHY 'phys' property, see
+Documentation/devicetree/bindings/phy/phy-bindings.txt.
+
- local-mac-address: array of 6 bytes, specifies the MAC address that was
assigned to the network device;
- mac-address: array of 6 bytes, specifies the MAC address that was last used by
diff --git a/Documentation/devicetree/bindings/net/sff,sfp.txt b/Documentation/devicetree/bindings/net/sff,sfp.txt
new file mode 100644
index 000000000000..60e970ce10ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/sff,sfp.txt
@@ -0,0 +1,76 @@
+Small Form Factor (SFF) Committee Small Form-factor Pluggable (SFP)
+Transceiver
+
+Required properties:
+
+- compatible : must be "sff,sfp"
+
+Optional Properties:
+
+- i2c-bus : phandle of an I2C bus controller for the SFP two wire serial
+ interface
+
+- mod-def0-gpios : GPIO phandle and a specifier of the MOD-DEF0 (AKA Mod_ABS)
+ module presence input gpio signal, active (module absent) high
+
+- los-gpios : GPIO phandle and a specifier of the Receiver Loss of Signal
+ Indication input gpio signal, active (signal lost) high
+
+- tx-fault-gpios : GPIO phandle and a specifier of the Module Transmitter
+ Fault input gpio signal, active (fault condition) high
+
+- tx-disable-gpios : GPIO phandle and a specifier of the Transmitter Disable
+ output gpio signal, active (Tx disable) high
+
+- rate-select0-gpios : GPIO phandle and a specifier of the Rx Signaling Rate
+ Select (AKA RS0) output gpio signal, low: low Rx rate, high: high Rx rate
+
+- rate-select1-gpios : GPIO phandle and a specifier of the Tx Signaling Rate
+ Select (AKA RS1) output gpio signal (SFP+ only), low: low Tx rate, high:
+ high Tx rate
+
+Example #1: Direct serdes to SFP connection
+
+sfp_eth3: sfp-eth3 {
+ compatible = "sff,sfp";
+ i2c-bus = <&sfp_1g_i2c>;
+ los-gpios = <&cpm_gpio2 22 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&cpm_gpio2 21 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_sfp_1g_pins &cps_sfp_1g_pins>;
+ tx-disable-gpios = <&cps_gpio1 24 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&cpm_gpio2 19 GPIO_ACTIVE_HIGH>;
+};
+
+&cps_emac3 {
+ phy-names = "comphy";
+ phys = <&cps_comphy5 0>;
+ sfp = <&sfp_eth3>;
+};
+
+Example #2: Serdes to PHY to SFP connection
+
+sfp_eth0: sfp-eth0 {
+ compatible = "sff,sfp";
+ i2c-bus = <&sfpp0_i2c>;
+ los-gpios = <&cps_gpio1 28 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&cps_gpio1 27 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cps_sfpp0_pins>;
+ tx-disable-gpios = <&cps_gpio1 29 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>;
+};
+
+p0_phy: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_phy0_pins &cps_phy0_pins>;
+ reg = <0>;
+ interrupt = <&cpm_gpio2 18 IRQ_TYPE_EDGE_FALLING>;
+ sfp = <&sfp_eth0>;
+};
+
+&cpm_eth0 {
+ phy = <&p0_phy>;
+ phy-mode = "10gbase-kr";
+};
diff --git a/Documentation/devicetree/bindings/phy/phy-bindings.txt b/Documentation/devicetree/bindings/phy/phy-bindings.txt
index 1293c321754c..a403b81d0679 100644
--- a/Documentation/devicetree/bindings/phy/phy-bindings.txt
+++ b/Documentation/devicetree/bindings/phy/phy-bindings.txt
@@ -34,7 +34,9 @@ PHY user node
=============
Required Properties:
-phys : the phandle for the PHY device (used by the PHY subsystem)
+phys : the phandle for the PHY device (used by the PHY subsystem; not to be
+ confused with the Ethernet specific 'phy' and 'phy-handle' properties,
+ see Documentation/devicetree/bindings/net/ethernet.txt for these)
phy-names : the names of the PHY corresponding to the PHYs present in the
*phys* phandle
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 401ed98cab18..5a79aeb620b3 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -292,6 +292,7 @@ schindler Schindler
seagate Seagate Technology PLC
semtech Semtech Corporation
sensirion Sensirion AG
+sff Small Form Factor Committee
sgx SGX Sensortech
sharp Sharp Corporation
si-en Si-En Technology Ltd.