summaryrefslogtreecommitdiff
path: root/MAINTAINERS
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2023-07-01 01:06:45 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2023-07-01 01:06:45 +0300
commit9070577ae9d6065e447d422bdf85a09f89eaa9e8 (patch)
tree329b4b63b5720ba649c88ceeb9f6548ab55dd569 /MAINTAINERS
parent28968f384be3c064d66954aac4c534a5e76bf973 (diff)
parent6ecac465eee887de7ceda7ffe3bccf538eb786bc (diff)
downloadlinux-9070577ae9d6065e447d422bdf85a09f89eaa9e8.tar.xz
Merge tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas: "Enumeration: - Export pcie_retrain_link() for use outside ASPM - Add Data Link Layer Link Active Reporting as another way for pcie_retrain_link() to determine the link is up - Work around link training failures (especially on the ASMedia ASM2824 switch) by training first at 2.5GT/s and then attempting higher rates Resource management: - When we coalesce host bridge windows, remove invalidated resources from the resource tree so future allocations work correctly Hotplug: - Cancel bringup sequence if card is not present, to keep from blinking Power Indicator indefinitely - Reassign bridge resources if necessary for ACPI hotplug Driver binding: - Convert platform_device .remove() callbacks to return void instead of a mostly useless int Power management: - Reduce wait time for secondary bus to be ready to speed up resume - Avoid putting EloPOS E2/S2/H2 (as well as Elo i2) PCIe Ports in D3cold - Call _REG when transitioning D-states so AML that uses the PCI config space OpRegion works, which fixes some ASMedia GPIO controllers after resume Virtualization: - Delay extra 250ms after FLR of Solidigm P44 Pro NVMe to avoid KVM hang when guest is rebooted - Add function 1 DMA alias quirk for Marvell 88SE9235 Error handling: - Unexport pci_save_aer_state() since it's only used in drivers/pci/ - Drop recommendation for drivers to configure AER Capability, since the PCI core does this for all devices ASPM: - Disable ASPM on MFD function removal to avoid use-after-free - Tighten up pci_enable_link_state() and pci_disable_link_state() interfaces so they don't enable/disable states the driver didn't specify - Avoid link retraining race that can happen if ASPM sets link control parameters while the link is in the midst of training for some other reason Endpoint framework: - Change "PCI Endpoint Virtual NTB driver" Kconfig prompt to be different from "PCI Endpoint NTB driver" - Automatically create a function specific attributes group for endpoint drivers to avoid reference counting issues - Fix many EPC test issues - Return pci_epf_type_add_cfs() error if EPF has no driver - Add kernel-doc for pci_epc_raise_irq() and pci_epc_map_msi_irq() MSI vector parameters - Pass EPF device ID to driver probe functions - Return -EALREADY if EPC has already been started/stopped - Add linkdown notifier support and use it in qcom-ep - Add Bus Master Enable event support and use it in qcom-ep - Add Qualcomm Modem Host Interface (MHI) endpoint driver - Add Layerscape PME interrupt handling to manage link-up notification Cadence PCIe controller driver: - Wait for link retrain to complete when working around the J721E i2085 erratum with Gen2 mode Faraday FTPC100 PCI controller driver: - Release clock resources on error paths Freescale i.MX6 PCIe controller driver: - Save and restore Root Port MSI control to work around hardware defect Intel VMD host bridge driver: - Reset VMD config register between soft reboots - Capture pci_reset_bus() return value instead of printing junk when it fails Qualcomm PCIe controller driver: - Add SDX65 endpoint compatible string to DT binding - Disable register write access after init for IP v2.3.3, v2.9.0 - Use DWC helpers for enabling/disabling writes to DBI registers - Hide slot hotplug capability for IP v1.0.0, v1.9.0, v2.1.0, v2.3.2, v2.3.3, v2.7.0, v2.9.0 - Reuse v2.3.2 post-init sequence for v2.4.0 Renesas R-Car PCIe controller driver: - Remove unused static pcie_base and pcie_dev Rockchip PCIe controller driver: - Remove writes to unused registers - Write endpoint Device ID using correct register - Assert PCI Configuration Enable bit after probe so endpoint responds instead of generating Request Retry Status messages - Poll waiting for PHY PLLs to lock - Update RK3399 example DT binding to be valid - Use RK3399 PCIE_CLIENT_LEGACY_INT_CTRL to generate INTx instead of manually generating PCIe message - Use multiple windows to avoid address translation conflicts - Use u32 (not u16) when accessing 32-bit registers - Hide MSI-X Capability, since RK3399 can't generate MSI-X - Set endpoint controller required alignment to 256 Synopsys DesignWare PCIe controller driver: - Wait for link to come up only if we've initiated link training Miscellaneous: - Add pci_clear_master() stub for non-CONFIG_PCI" * tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits) Documentation: PCI: correct spelling PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain() PCI: xgene-msi: Convert to platform remove callback returning void PCI: tegra: Convert to platform remove callback returning void PCI: rockchip-host: Convert to platform remove callback returning void PCI: mvebu: Convert to platform remove callback returning void PCI: mt7621: Convert to platform remove callback returning void PCI: mediatek-gen3: Convert to platform remove callback returning void PCI: mediatek: Convert to platform remove callback returning void PCI: iproc: Convert to platform remove callback returning void PCI: hisi-error: Convert to platform remove callback returning void PCI: dwc: Convert to platform remove callback returning void PCI: j721e: Convert to platform remove callback returning void PCI: brcmstb: Convert to platform remove callback returning void PCI: altera-msi: Convert to platform remove callback returning void PCI: altera: Convert to platform remove callback returning void PCI: aardvark: Convert to platform remove callback returning void PCI: rcar: Use correct product family name for Renesas R-Car PCI: layerscape: Add the endpoint linkup notifier support PCI: endpoint: pci-epf-vntb: Fix typo in comments ...
Diffstat (limited to 'MAINTAINERS')
-rw-r--r--MAINTAINERS1
1 files changed, 1 insertions, 0 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index f94fb9e8a5b7..d2326e843748 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13744,6 +13744,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi.git
F: Documentation/ABI/stable/sysfs-bus-mhi
F: Documentation/mhi/
F: drivers/bus/mhi/
+F: drivers/pci/endpoint/functions/pci-epf-mhi.c
F: include/linux/mhi.h
MICROBLAZE ARCHITECTURE