ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 788 deletions

diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
deleted file mode 100644
index a8cd724ce4bc..000000000000
--- a/arch/arm/boot/dts/dm814x.dtsi
+++ /dev/null
@@ -1,788 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <dt-bindings/bus/ti-sysc.h>
-#include <dt-bindings/clock/dm814.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/dm814x.h>
-
-/ {
-	compatible = "ti,dm814";
-	interrupt-parent = <&intc>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	chosen { };
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		ethernet0 = &cpsw_emac0;
-		ethernet1 = &cpsw_emac1;
-		usb0 = &usb0;
-		usb1 = &usb1;
-		phy0 = &usb0_phy;
-		phy1 = &usb1_phy;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			compatible = "arm,cortex-a8";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a8-pmu";
-		interrupts = <3>;
-	};
-
-	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap3-mpu";
-			ti,hwmods = "mpu";
-		};
-	};
-
-	ocp {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main";
-
-		usb: usb@47400000 {
-			compatible = "ti,am33xx-usb";
-			reg = <0x47400000 0x1000>;
-			ranges;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ti,hwmods = "usb_otg_hs";
-
-			usb0_phy: usb-phy@47401300 {
-				compatible = "ti,am335x-usb-phy";
-				reg = <0x47401300 0x100>;
-				reg-names = "phy";
-				ti,ctrl_mod = <&usb_ctrl_mod>;
-				#phy-cells = <0>;
-			};
-
-			usb0: usb@47401000 {
-				compatible = "ti,musb-am33xx";
-				reg = <0x47401400 0x400
-				       0x47401000 0x200>;
-				reg-names = "mc", "control";
-
-				interrupts = <18>;
-				interrupt-names = "mc";
-				dr_mode = "otg";
-				mentor,multipoint = <1>;
-				mentor,num-eps = <16>;
-				mentor,ram-bits = <12>;
-				mentor,power = <500>;
-				phys = <&usb0_phy>;
-
-				dmas = <&cppi41dma  0 0 &cppi41dma  1 0
-					&cppi41dma  2 0 &cppi41dma  3 0
-					&cppi41dma  4 0 &cppi41dma  5 0
-					&cppi41dma  6 0 &cppi41dma  7 0
-					&cppi41dma  8 0 &cppi41dma  9 0
-					&cppi41dma 10 0 &cppi41dma 11 0
-					&cppi41dma 12 0 &cppi41dma 13 0
-					&cppi41dma 14 0 &cppi41dma  0 1
-					&cppi41dma  1 1 &cppi41dma  2 1
-					&cppi41dma  3 1 &cppi41dma  4 1
-					&cppi41dma  5 1 &cppi41dma  6 1
-					&cppi41dma  7 1 &cppi41dma  8 1
-					&cppi41dma  9 1 &cppi41dma 10 1
-					&cppi41dma 11 1 &cppi41dma 12 1
-					&cppi41dma 13 1 &cppi41dma 14 1>;
-				dma-names =
-					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
-					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
-					"rx14", "rx15",
-					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
-					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
-					"tx14", "tx15";
-			};
-
-			usb1: usb@47401800 {
-				compatible = "ti,musb-am33xx";
-				reg = <0x47401c00 0x400
-					0x47401800 0x200>;
-				reg-names = "mc", "control";
-				interrupts = <19>;
-				interrupt-names = "mc";
-				dr_mode = "otg";
-				mentor,multipoint = <1>;
-				mentor,num-eps = <16>;
-				mentor,ram-bits = <12>;
-				mentor,power = <500>;
-				phys = <&usb1_phy>;
-
-				dmas = <&cppi41dma 15 0 &cppi41dma 16 0
-					&cppi41dma 17 0 &cppi41dma 18 0
-					&cppi41dma 19 0 &cppi41dma 20 0
-					&cppi41dma 21 0 &cppi41dma 22 0
-					&cppi41dma 23 0 &cppi41dma 24 0
-					&cppi41dma 25 0 &cppi41dma 26 0
-					&cppi41dma 27 0 &cppi41dma 28 0
-					&cppi41dma 29 0 &cppi41dma 15 1
-					&cppi41dma 16 1 &cppi41dma 17 1
-					&cppi41dma 18 1 &cppi41dma 19 1
-					&cppi41dma 20 1 &cppi41dma 21 1
-					&cppi41dma 22 1 &cppi41dma 23 1
-					&cppi41dma 24 1 &cppi41dma 25 1
-					&cppi41dma 26 1 &cppi41dma 27 1
-					&cppi41dma 28 1 &cppi41dma 29 1>;
-				dma-names =
-					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
-					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
-					"rx14", "rx15",
-					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
-					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
-					"tx14", "tx15";
-			};
-
-			cppi41dma: dma-controller@47402000 {
-				compatible = "ti,am3359-cppi41";
-				reg =  <0x47400000 0x1000
-					0x47402000 0x1000
-					0x47403000 0x1000
-					0x47404000 0x4000>;
-				reg-names = "glue", "controller", "scheduler", "queuemgr";
-				interrupts = <17>;
-				interrupt-names = "glue";
-				#dma-cells = <2>;
-				/* For backwards compatibility: */
-				#dma-channels = <30>;
-				dma-channels = <30>;
-				#dma-requests = <256>;
-				dma-requests = <256>;
-			};
-		};
-
-		/*
-		 * See TRM "Table 1-317. L4LS Instance Summary" for hints.
-		 * It shows the module target agent registers though, so the
-		 * actual device is typically 0x1000 before the target agent
-		 * except in cases where the module is larger than 0x1000.
-		 */
-		l4ls: l4ls@48000000 {
-			compatible = "ti,dm814-l4ls", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x48000000 0x2000000>;
-
-			i2c1: i2c@28000 {
-				compatible = "ti,omap4-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,hwmods = "i2c1";
-				reg = <0x28000 0x1000>;
-				interrupts = <70>;
-			};
-
-			elm: elm@80000 {
-				compatible = "ti,814-elm";
-				ti,hwmods = "elm";
-				reg = <0x80000 0x2000>;
-				interrupts = <4>;
-			};
-
-			gpio1: gpio@32000 {
-				compatible = "ti,omap4-gpio";
-				ti,hwmods = "gpio1";
-				ti,gpio-always-on;
-				reg = <0x32000 0x2000>;
-				interrupts = <96>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio2: gpio@4c000 {
-				compatible = "ti,omap4-gpio";
-				ti,hwmods = "gpio2";
-				ti,gpio-always-on;
-				reg = <0x4c000 0x2000>;
-				interrupts = <98>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio3: gpio@1ac000 {
-				compatible = "ti,omap4-gpio";
-				ti,hwmods = "gpio3";
-				ti,gpio-always-on;
-				reg = <0x1ac000 0x2000>;
-				interrupts = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio4: gpio@1ae000 {
-				compatible = "ti,omap4-gpio";
-				ti,hwmods = "gpio4";
-				ti,gpio-always-on;
-				reg = <0x1ae000 0x2000>;
-				interrupts = <62>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			i2c2: i2c@2a000 {
-				compatible = "ti,omap4-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,hwmods = "i2c2";
-				reg = <0x2a000 0x1000>;
-				interrupts = <71>;
-			};
-
-			mcspi1: spi@30000 {
-				compatible = "ti,omap4-mcspi";
-				reg = <0x30000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <65>;
-				ti,spi-num-cs = <4>;
-				ti,hwmods = "mcspi1";
-				dmas = <&edma 16 0 &edma 17 0
-					&edma 18 0 &edma 19 0
-					&edma 20 0 &edma 21 0
-					&edma 22 0 &edma 23 0>;
-
-				dma-names = "tx0", "rx0", "tx1", "rx1",
-					"tx2", "rx2", "tx3", "rx3";
-			};
-
-			mcspi2: spi@1a0000 {
-				compatible = "ti,omap4-mcspi";
-				reg = <0x1a0000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <125>;
-				ti,spi-num-cs = <4>;
-				ti,hwmods = "mcspi2";
-				dmas = <&edma 42 0 &edma 43 0
-					&edma 44 0 &edma 45 0>;
-				dma-names = "tx0", "rx0", "tx1", "rx1";
-			};
-
-			/* Board must configure dmas with edma_xbar for EDMA */
-			mcspi3: spi@1a2000 {
-				compatible = "ti,omap4-mcspi";
-				reg = <0x1a2000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <126>;
-				ti,spi-num-cs = <4>;
-				ti,hwmods = "mcspi3";
-			};
-
-			mcspi4: spi@1a4000 {
-				compatible = "ti,omap4-mcspi";
-				reg = <0x1a4000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <127>;
-				ti,spi-num-cs = <4>;
-				ti,hwmods = "mcspi4";
-			};
-
-			timer1_target: target-module@2e000 {
-				compatible = "ti,sysc-omap4-timer", "ti,sysc";
-				reg = <0x2e000 0x4>,
-				      <0x2e010 0x4>;
-				reg-names = "rev", "sysc";
-				ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-				ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-						<SYSC_IDLE_NO>,
-						<SYSC_IDLE_SMART>,
-						<SYSC_IDLE_SMART_WKUP>;
-				clocks = <&timer1_fck>;
-				clock-names = "fck";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0x2e000 0x1000>;
-
-				timer1: timer@0 {
-					compatible = "ti,am335x-timer-1ms";
-					reg = <0x0 0x400>;
-					interrupts = <67>;
-					ti,timer-alwon;
-					clocks = <&timer1_fck>;
-					clock-names = "fck";
-				};
-			};
-
-			uart1: serial@20000 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
-				ti,hwmods = "uart1";
-				reg = <0x20000 0x2000>;
-				clock-frequency = <48000000>;
-				interrupts = <72>;
-				dmas = <&edma 26 0 &edma 27 0>;
-				dma-names = "tx", "rx";
-			};
-
-			uart2: serial@22000 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
-				ti,hwmods = "uart2";
-				reg = <0x22000 0x2000>;
-				clock-frequency = <48000000>;
-				interrupts = <73>;
-				dmas = <&edma 28 0 &edma 29 0>;
-				dma-names = "tx", "rx";
-			};
-
-			uart3: serial@24000 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
-				ti,hwmods = "uart3";
-				reg = <0x24000 0x2000>;
-				clock-frequency = <48000000>;
-				interrupts = <74>;
-				dmas = <&edma 30 0 &edma 31 0>;
-				dma-names = "tx", "rx";
-			};
-
-			timer2_target: target-module@40000 {
-				compatible = "ti,sysc-omap4-timer", "ti,sysc";
-				reg = <0x40000 0x4>,
-				      <0x40010 0x4>;
-				reg-names = "rev", "sysc";
-				ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-				ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-						<SYSC_IDLE_NO>,
-						<SYSC_IDLE_SMART>,
-						<SYSC_IDLE_SMART_WKUP>;
-				clocks = <&timer2_fck>;
-				clock-names = "fck";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0x40000 0x1000>;
-
-				timer2: timer@0 {
-					compatible = "ti,dm814-timer";
-					reg = <0 0x1000>;
-					interrupts = <68>;
-					clocks = <&timer2_fck>;
-					clock-names = "fck";
-				};
-			};
-
-			timer3: timer@42000 {
-				compatible = "ti,dm814-timer";
-				reg = <0x42000 0x2000>;
-				interrupts = <69>;
-				ti,hwmods = "timer3";
-			};
-
-			mmc1: mmc@60000 {
-				compatible = "ti,omap4-hsmmc";
-				ti,hwmods = "mmc1";
-				dmas = <&edma 24 0
-					&edma 25 0>;
-				dma-names = "tx", "rx";
-				interrupts = <64>;
-				interrupt-parent = <&intc>;
-				reg = <0x60000 0x1000>;
-			};
-
-			rtc: rtc@c0000 {
-				compatible = "ti,am3352-rtc", "ti,da830-rtc";
-				reg = <0xc0000 0x1000>;
-				interrupts = <75 76>;
-				ti,hwmods = "rtc";
-			};
-
-			mmc2: mmc@1d8000 {
-				compatible = "ti,omap4-hsmmc";
-				ti,hwmods = "mmc2";
-				dmas = <&edma 2 0
-					&edma 3 0>;
-				dma-names = "tx", "rx";
-				interrupts = <28>;
-				interrupt-parent = <&intc>;
-				reg = <0x1d8000 0x1000>;
-			};
-
-			control: control@140000 {
-				compatible = "ti,dm814-scm", "simple-bus";
-				reg = <0x140000 0x20000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x140000 0x20000>;
-
-				scm_conf: scm_conf@0 {
-					compatible = "syscon", "simple-bus";
-					reg = <0x0 0x800>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0 0x800>;
-
-					phy_gmii_sel: phy-gmii-sel {
-						compatible = "ti,dm814-phy-gmii-sel";
-						reg = <0x650 0x4>;
-						#phy-cells = <1>;
-					};
-
-					scm_clocks: clocks {
-						#address-cells = <1>;
-						#size-cells = <0>;
-					};
-
-					scm_clockdomains: clockdomains {
-					};
-				};
-
-				usb_ctrl_mod: control@620 {
-					compatible = "ti,am335x-usb-ctrl-module";
-					reg = <0x620 0x10
-						0x648 0x4>;
-					reg-names = "phy_ctrl", "wakeup";
-				};
-
-				edma_xbar: dma-router@f90 {
-					compatible = "ti,am335x-edma-crossbar";
-					reg = <0xf90 0x40>;
-					#dma-cells = <3>;
-					dma-requests = <32>;
-					dma-masters = <&edma>;
-				};
-
-				/*
-				 * Note that silicon revision 2.1 and older
-				 * require input enabled (bit 18 set) for all
-				 * 3.3V I/Os to avoid cumulative hardware damage.
-				 * For more info, see errata advisory 2.1.87.
-				 * We leave bit 18 out of function-mask and rely
-				 * on the bootloader for it.
-				 */
-				pincntl: pinmux@800 {
-					compatible = "pinctrl-single";
-					reg = <0x800 0x438>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					#pinctrl-cells = <1>;
-					pinctrl-single,register-width = <32>;
-					pinctrl-single,function-mask = <0x307ff>;
-				};
-
-				usb1_phy: usb-phy@1b00 {
-					compatible = "ti,am335x-usb-phy";
-					reg = <0x1b00 0x100>;
-					reg-names = "phy";
-					ti,ctrl_mod = <&usb_ctrl_mod>;
-					#phy-cells = <0>;
-				};
-			};
-
-			prcm: prcm@180000 {
-				compatible = "ti,dm814-prcm", "simple-bus";
-				reg = <0x180000 0x2000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x180000 0x2000>;
-
-				prcm_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				prcm_clockdomains: clockdomains {
-				};
-			};
-
-			/* See TRM PLL_SUBSYS_BASE and "PLLSS Registers" */
-			pllss: pllss@1c5000 {
-				compatible = "ti,dm814-pllss", "simple-bus";
-				reg = <0x1c5000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x1c5000 0x1000>;
-
-				pllss_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				pllss_clockdomains: clockdomains {
-				};
-			};
-
-			wdt1: wdt@1c7000 {
-				compatible = "ti,omap3-wdt";
-				ti,hwmods = "wd_timer";
-				reg = <0x1c7000 0x1000>;
-				interrupts = <91>;
-			};
-		};
-
-		intc: interrupt-controller@48200000 {
-			compatible = "ti,dm814-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x48200000 0x1000>;
-		};
-
-		/* Board must configure evtmux with edma_xbar for EDMA */
-		mmc3: mmc@47810000 {
-			compatible = "ti,omap4-hsmmc";
-			ti,hwmods = "mmc3";
-			interrupts = <29>;
-			interrupt-parent = <&intc>;
-			reg = <0x47810000 0x1000>;
-		};
-
-		target-module@49000000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x49000000 0x4>;
-			reg-names = "rev";
-			clocks = <&alwon_clkctrl DM814_TPCC_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x49000000 0x10000>;
-
-			edma: dma@0 {
-				compatible = "ti,edma3-tpcc";
-				reg = <0 0x10000>;
-				reg-names = "edma3_cc";
-				interrupts = <12 13 14>;
-				interrupt-names = "edma3_ccint", "edma3_mperr",
-						  "edma3_ccerrint";
-				dma-requests = <64>;
-				#dma-cells = <2>;
-
-				ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
-					   <&edma_tptc2 3>, <&edma_tptc3 0>;
-
-				ti,edma-memcpy-channels = <20 21>;
-			};
-		};
-
-		target-module@49800000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x49800000 0x4>,
-			      <0x49800010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&alwon_clkctrl DM814_TPTC0_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x49800000 0x100000>;
-
-			edma_tptc0: dma@0 {
-				compatible = "ti,edma3-tptc";
-				reg = <0 0x100000>;
-				interrupts = <112>;
-				interrupt-names = "edma3_tcerrint";
-			};
-		};
-
-		target-module@49900000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x49900000 0x4>,
-			      <0x49900010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&alwon_clkctrl DM814_TPTC1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x49900000 0x100000>;
-
-			edma_tptc1: dma@0 {
-				compatible = "ti,edma3-tptc";
-				reg = <0 0x100000>;
-				interrupts = <113>;
-				interrupt-names = "edma3_tcerrint";
-			};
-		};
-
-		target-module@49a00000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x49a00000 0x4>,
-			      <0x49a00010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&alwon_clkctrl DM814_TPTC2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x49a00000 0x100000>;
-
-			edma_tptc2: dma@0 {
-				compatible = "ti,edma3-tptc";
-				reg = <0 0x100000>;
-				interrupts = <114>;
-				interrupt-names = "edma3_tcerrint";
-			};
-		};
-
-		target-module@49b00000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x49b00000 0x4>,
-			      <0x49b00010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&alwon_clkctrl DM814_TPTC3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x49b00000 0x100000>;
-
-			edma_tptc3: dma@0 {
-				compatible = "ti,edma3-tptc";
-				reg = <0 0x100000>;
-				interrupts = <115>;
-				interrupt-names = "edma3_tcerrint";
-			};
-		};
-
-		/* See TRM "Table 1-318. L4HS Instance Summary" */
-		l4hs: l4hs@4a000000 {
-			compatible = "ti,dm814-l4hs", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x4a000000 0x1b4040>;
-
-			target-module@100000 {
-				compatible = "ti,sysc-omap4-simple", "ti,sysc";
-				reg = <0x100900 0x4>,
-				      <0x100908 0x4>,
-				      <0x100904 0x4>;
-				reg-names = "rev", "sysc", "syss";
-				ti,sysc-mask = <0>;
-				ti,sysc-midle = <SYSC_IDLE_FORCE>,
-						<SYSC_IDLE_NO>;
-				ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-						<SYSC_IDLE_NO>;
-				ti,syss-mask = <1>;
-				clocks = <&alwon_ethernet_clkctrl DM814_ETHERNET_CPGMAC0_CLKCTRL 0>;
-				clock-names = "fck";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x100000 0x8000>;
-
-				mac: ethernet@0 {
-					compatible = "ti,cpsw";
-					clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
-					clock-names = "fck", "cpts";
-					cpdma_channels = <8>;
-					ale_entries = <1024>;
-					bd_ram_size = <0x2000>;
-					mac_control = <0x20>;
-					slaves = <2>;
-					active_slave = <0>;
-					cpts_clock_mult = <0x80000000>;
-					cpts_clock_shift = <29>;
-					reg = <0 0x800>,
-					      <0x900 0x100>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					/*
-					* c0_rx_thresh_pend
-					* c0_rx_pend
-					* c0_tx_pend
-					* c0_misc_pend
-					*/
-					interrupts = <40 41 42 43>;
-					ranges = <0 0 0x8000>;
-					syscon = <&scm_conf>;
-
-					davinci_mdio: mdio@800 {
-						compatible = "ti,cpsw-mdio", "ti,davinci_mdio";
-						clocks = <&cpsw_125mhz_gclk>;
-						clock-names = "fck";
-						#address-cells = <1>;
-						#size-cells = <0>;
-						bus_freq = <1000000>;
-						reg = <0x800 0x100>;
-					};
-
-					cpsw_emac0: slave@200 {
-						/* Filled in by U-Boot */
-						mac-address = [ 00 00 00 00 00 00 ];
-						phys = <&phy_gmii_sel 1>;
-					};
-
-					cpsw_emac1: slave@300 {
-						/* Filled in by U-Boot */
-						mac-address = [ 00 00 00 00 00 00 ];
-						phys = <&phy_gmii_sel 2>;
-					};
-				};
-			};
-		};
-
-		gpmc: gpmc@50000000 {
-			compatible = "ti,am3352-gpmc";
-			ti,hwmods = "gpmc";
-			ti,no-idle-on-init;
-			reg = <0x50000000 0x2000>;
-			interrupts = <100>;
-			gpmc,num-cs = <7>;
-			gpmc,num-waitpins = <2>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-	};
-};
-
-#include "dm814x-clocks.dtsi"
-
-/* Preferred always-on timer for clocksource */
-&timer1_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&timer1_fck>;
-		assigned-clock-parents = <&devosc_ck>;
-	};
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&timer2_fck>;
-		assigned-clock-parents = <&devosc_ck>;
-	};
-};