ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 306 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/microchip/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/microchip/at91-nattis-2-natte-2.dts
new file mode 100644
index 000000000000..f71377c9b757
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-nattis-2-natte-2.dts
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * at91-nattis-2-natte-2.dts - Device Tree file for the Linea/Nattis board
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ */
+/dts-v1/;
+#include "at91-linea.dtsi"
+#include "at91-natte.dtsi"
+
+/ {
+	model = "Axentia Linea-Nattis v2 Natte v2";
+	compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea",
+		     "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-wakeup {
+			label = "Wakeup";
+			linux,code = <10>;
+			wakeup-source;
+			gpios = <&pioB 27 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	panel_reg: panel-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-VCC";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	bl_reg: backlight-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-VDD";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	panel_bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 100000 0>;
+
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <40>;
+
+		power-supply = <&bl_reg>;
+		enable-gpios = <&pioA 20 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_blon>;
+	};
+
+	panel: panel {
+		compatible = "sharp,lq150x1lg11", "panel-lvds";
+
+		backlight = <&panel_bl>;
+		power-supply = <&panel_reg>;
+
+		width-mm = <304>;
+		height-mm = <228>;
+
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			// 1024x768 @ 60Hz (typical)
+			clock-frequency = <50000000 65000000 80000000>;
+			hactive = <1024>;
+			vactive = <768>;
+			hfront-porch = <48 88 88>;
+			hback-porch = <96 168 168>;
+			hsync-len = <32 64 64>;
+			vsync-len = <3 13 74>;
+			vfront-porch = <3 13 74>;
+			vback-porch = <3 12 74>;
+		};
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&lvds_encoder_output>;
+			};
+		};
+	};
+
+	lvds-encoder {
+		compatible = "ti,ds90c185", "lvds-encoder";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds_prlud0 &pinctrl_lvds_hipow0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+					remote-endpoint = <&hlcdc_output>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,name = "nattis-tfa9879";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&cpu_dai>;
+		simple-audio-card,frame-master = <&cpu_dai>;
+		simple-audio-card,widgets = "Line", "Line Out Jack";
+		simple-audio-card,routing = "Line Out Jack", "LINEOUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&ssc0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&amp>;
+		};
+	};
+};
+
+&pinctrl {
+	nattis {
+		pinctrl_usba_vbus: usba_vbus {
+			atmel,pins = <AT91_PIOD 28 AT91_PERIPH_GPIO
+				      AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_mmc0_cd: mmc0_cd {
+			atmel,pins = <AT91_PIOD  5 AT91_PERIPH_GPIO
+				      AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		pinctrl_lvds_prlud0: lvds_prlud0 {
+			atmel,pins = <AT91_PIOA 21 AT91_PERIPH_GPIO
+				      (AT91_PINCTRL_OUTPUT |
+				       AT91_PINCTRL_OUTPUT_VAL(0))>;
+		};
+
+		pinctrl_lvds_hipow0: lvds_hipow0 {
+			atmel,pins = <AT91_PIOA 23 AT91_PERIPH_GPIO
+				      (AT91_PINCTRL_OUTPUT |
+				       AT91_PINCTRL_OUTPUT_VAL(0))>;
+		};
+
+		pinctrl_blon: blon {
+			atmel,pins = <AT91_PIOA 20 AT91_PERIPH_GPIO
+				      (AT91_PINCTRL_OUTPUT |
+				       AT91_PINCTRL_OUTPUT_VAL(0))>;
+		};
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	clock-frequency = <100000>;
+
+	temp@18 {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x18>;
+		smbus-timeout-disable;
+	};
+
+	eeprom@50 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	amp: amplifier@6c {
+		 compatible = "nxp,tfa9879";
+		 reg = <0x6c>;
+		 #sound-dai-cells = <0>;
+	};
+};
+
+&ssc0 {
+	status = "okay";
+
+	atmel,clk-from-rk-pin;
+	#sound-dai-cells = <0>;
+};
+
+&hlcdc {
+	status = "okay";
+
+	hlcdc-display-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
+
+		port@0 {
+			hlcdc_output: endpoint {
+				remote-endpoint = <&lvds_encoder_input>;
+				bus-width = <16>;
+			};
+		};
+	};
+};
+
+&mmc0 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0
+		     &pinctrl_mmc0_dat1_3
+		     &pinctrl_mmc0_cd>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		cd-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+		cd-inverted;
+	};
+};
+
+&usart0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart0>;
+	atmel,use-dma-rx;
+};
+
+&nand {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		at91bootstrap@0 {
+			label = "at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		barebox@40000 {
+			label = "barebox";
+			reg = <0x40000 0x60000>;
+		};
+
+		bareboxenv@c0000 {
+			label = "bareboxenv";
+			reg = <0xc0000 0x40000>;
+		};
+
+		bareboxenv2@100000 {
+			label = "bareboxenv2";
+			reg = <0x100000 0x40000>;
+		};
+
+		oftree@180000 {
+			label = "oftree";
+			reg = <0x180000 0x20000>;
+		};
+
+		kernel@200000 {
+			label = "kernel";
+			reg = <0x200000 0x500000>;
+		};
+
+		rootfs@800000 {
+			label = "rootfs";
+			reg = <0x800000 0x1f800000>;
+		};
+	};
+};
+
+&dbgu {
+	status = "okay";
+
+	atmel,use-dma-rx;
+};
+
+&usb0 {
+	status = "okay";
+
+	atmel,vbus-gpio = <&pioD 28 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+};