ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 309 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi
new file mode 100644
index 000000000000..024af2db638e
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi
@@ -0,0 +1,309 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9g20ek_common.dtsi - Device Tree file for Atmel at91sam9g20ek board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+#include "at91sam9g20.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+
+	chosen {
+		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				board {
+					pinctrl_pck0_as_mck: pck0_as_mck {
+						atmel,pins =
+							<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC1 periph B */
+					};
+
+				};
+
+				usb1 {
+					pinctrl_usb1_vbus_gpio: usb1_vbus_gpio {
+						atmel,pins =
+							<AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PC5 GPIO */
+					};
+				};
+
+				mmc0_slot1 {
+					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PC9 gpio CD pin pull up and deglitch */
+					};
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 =
+					<&pinctrl_usart0
+					 &pinctrl_usart0_rts
+					 &pinctrl_usart0_cts
+					 &pinctrl_usart0_dtr_dsr
+					 &pinctrl_usart0_dcd
+					 &pinctrl_usart0_ri>;
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fffa4000 {
+				pinctrl-0 = <&pinctrl_usb1_vbus_gpio>;
+				pinctrl-names = "default";
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0_slot1
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot1_cmd_dat0
+					&pinctrl_mmc0_slot1_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+					cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			ssc0: ssc@fffbc000 {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_ssc0_tx>;
+			};
+
+			spi0: spi@fffc8000 {
+				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
+				flash@1 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <50000000>;
+					reg = <1>;
+				};
+			};
+
+			shdwc@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+			gpbr: syscon@fffffd50 {
+				status = "okay";
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x20000>;
+						};
+
+						barebox@20000 {
+							label = "barebox";
+							reg = <0x20000 0x40000>;
+						};
+
+						bareboxenv@60000 {
+							label = "bareboxenv";
+							reg = <0x60000 0x20000>;
+						};
+
+						bareboxenv2@80000 {
+							label = "bareboxenv2";
+							reg = <0x80000 0x20000>;
+						};
+
+						oftree@80000 {
+							label = "oftree";
+							reg = <0xa0000 0x20000>;
+						};
+
+						kernel@a0000 {
+							label = "kernel";
+							reg = <0xc0000 0x400000>;
+						};
+
+						rootfs@4a0000 {
+							label = "rootfs";
+							reg = <0x4c0000 0x7800000>;
+						};
+
+						data@7ca0000 {
+							label = "data";
+							reg = <0x7cc0000 0x8340000>;
+						};
+					};
+				};
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+
+		24c512@50 {
+			compatible = "atmel,24c512";
+			reg = <0x50>;
+			vcc-supply = <&reg_3v3>;
+		};
+
+		wm8731: wm8731@1b {
+			compatible = "wm8731";
+			reg = <0x1b>;
+
+			/* PCK0 at 12MHz */
+			clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			clock-names = "mclk";
+			assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			assigned-clock-rates = <12000000>;
+
+			HPVDD-supply = <&vcc_dac>;
+			AVDD-supply = <&vcc_dac>;
+			DCVDD-supply = <&reg_3v3>;
+			DBVDD-supply = <&reg_3v3>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-3 {
+			label = "Button 3";
+			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
+			linux,code = <0x103>;
+			wakeup-source;
+		};
+
+		button-4 {
+			label = "Button 4";
+			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	sound {
+		compatible = "atmel,at91sam9g20ek-wm8731-audio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_mck>;
+
+		atmel,model = "wm8731 @ AT91SAMG20EK";
+
+		atmel,audio-routing =
+			"Ext Spk", "LHPOUT",
+			"Int Mic", "MICIN";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8731>;
+	};
+
+	reg_5v: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_3v3: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		vin-supply = <&reg_5v>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_1v: fixedregulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V";
+		vin-supply = <&reg_5v>;
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+	};
+
+	vcc_dac: fixedregulator3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_DAC";
+		vin-supply = <&reg_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};