Merge tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann:
 "This cleans up two ancient timer features that were never completed in
  the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET.

  There was only one user left for the ARCH_USES_GETTIMEOFFSET variant
  of clocksource implementations, the ARM EBSA110 platform. Rather than
  changing to use modern timekeeping, we remove the platform entirely as
  Russell no longer uses his machine and nobody else seems to have one
  any more.

  The conditional code for using arch_gettimeoffset() is removed as a
  result.

  For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms
  not using clockevent drivers: parisc, ia64, most of m68k, and one Arm
  platform. These all do timer ticks slighly differently, and this gets
  cleaned up to the point they at least all call the same helper
  function.

  Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in
  Kconfig, the polarity is now reversed, with the few remaining ones
  selecting LEGACY_TIMER_TICK instead"

* tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  timekeeping: default GENERIC_CLOCKEVENTS to enabled
  timekeeping: remove xtime_update
  m68k: remove timer_interrupt() function
  m68k: change remaining timers to legacy_timer_tick
  m68k: m68328: use legacy_timer_tick()
  m68k: sun3/sun3c: use legacy_timer_tick
  m68k: split heartbeat out of timer function
  m68k: coldfire: use legacy_timer_tick()
  parisc: use legacy_timer_tick
  ARM: rpc: use legacy_timer_tick
  ia64: convert to legacy_timer_tick
  timekeeping: add CONFIG_LEGACY_TIMER_TICK
  timekeeping: remove arch_gettimeoffset
  net: remove am79c961a driver
  ARM: remove ebsa110 platform

1 files changed, 0 insertions, 323 deletions

diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
deleted file mode 100644
index 5960e3dfd2bf..000000000000
--- a/arch/arm/mach-ebsa110/core.c
+++ /dev/null
@@ -1,323 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-ebsa110/core.c
- *
- *  Copyright (C) 1998-2001 Russell King
- *
- *  Extra MM routines for the EBSA-110 architecture
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/serial_8250.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include <asm/mach/time.h>
-
-#include "core.h"
-
-static void ebsa110_mask_irq(struct irq_data *d)
-{
-	__raw_writeb(1 << d->irq, IRQ_MCLR);
-}
-
-static void ebsa110_unmask_irq(struct irq_data *d)
-{
-	__raw_writeb(1 << d->irq, IRQ_MSET);
-}
-
-static struct irq_chip ebsa110_irq_chip = {
-	.irq_ack	= ebsa110_mask_irq,
-	.irq_mask	= ebsa110_mask_irq,
-	.irq_unmask	= ebsa110_unmask_irq,
-};
- 
-static void __init ebsa110_init_irq(void)
-{
-	unsigned long flags;
-	unsigned int irq;
-
-	local_irq_save(flags);
-	__raw_writeb(0xff, IRQ_MCLR);
-	__raw_writeb(0x55, IRQ_MSET);
-	__raw_writeb(0x00, IRQ_MSET);
-	if (__raw_readb(IRQ_MASK) != 0x55)
-		while (1);
-	__raw_writeb(0xff, IRQ_MCLR);	/* clear all interrupt enables */
-	local_irq_restore(flags);
-
-	for (irq = 0; irq < NR_IRQS; irq++) {
-		irq_set_chip_and_handler(irq, &ebsa110_irq_chip,
-					 handle_level_irq);
-		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
-	}
-}
-
-static struct map_desc ebsa110_io_desc[] __initdata = {
-	/*
-	 * sparse external-decode ISAIO space
-	 */
-	{	/* IRQ_STAT/IRQ_MCLR */
-		.virtual	= (unsigned long)IRQ_STAT,
-		.pfn		= __phys_to_pfn(TRICK4_PHYS),
-		.length		= TRICK4_SIZE,
-		.type		= MT_DEVICE
-	}, {	/* IRQ_MASK/IRQ_MSET */
-		.virtual	= (unsigned long)IRQ_MASK,
-		.pfn		= __phys_to_pfn(TRICK3_PHYS),
-		.length		= TRICK3_SIZE,
-		.type		= MT_DEVICE
-	}, {	/* SOFT_BASE */
-		.virtual	= (unsigned long)SOFT_BASE,
-		.pfn		= __phys_to_pfn(TRICK1_PHYS),
-		.length		= TRICK1_SIZE,
-		.type		= MT_DEVICE
-	}, {	/* PIT_BASE */
-		.virtual	= (unsigned long)PIT_BASE,
-		.pfn		= __phys_to_pfn(TRICK0_PHYS),
-		.length		= TRICK0_SIZE,
-		.type		= MT_DEVICE
-	},
-
-	/*
-	 * self-decode ISAIO space
-	 */
-	{
-		.virtual	= ISAIO_BASE,
-		.pfn		= __phys_to_pfn(ISAIO_PHYS),
-		.length		= ISAIO_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= ISAMEM_BASE,
-		.pfn		= __phys_to_pfn(ISAMEM_PHYS),
-		.length		= ISAMEM_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init ebsa110_map_io(void)
-{
-	iotable_init(ebsa110_io_desc, ARRAY_SIZE(ebsa110_io_desc));
-}
-
-static void __iomem *ebsa110_ioremap_caller(phys_addr_t cookie, size_t size,
-					    unsigned int flags, void *caller)
-{
-	return (void __iomem *)cookie;
-}
-
-static void ebsa110_iounmap(volatile void __iomem *io_addr)
-{}
-
-static void __init ebsa110_init_early(void)
-{
-	arch_ioremap_caller = ebsa110_ioremap_caller;
-	arch_iounmap = ebsa110_iounmap;
-}
-
-#define PIT_CTRL		(PIT_BASE + 0x0d)
-#define PIT_T2			(PIT_BASE + 0x09)
-#define PIT_T1			(PIT_BASE + 0x05)
-#define PIT_T0			(PIT_BASE + 0x01)
-
-/*
- * This is the rate at which your MCLK signal toggles (in Hz)
- * This was measured on a 10 digit frequency counter sampling
- * over 1 second.
- */
-#define MCLK	47894000
-
-/*
- * This is the rate at which the PIT timers get clocked
- */
-#define CLKBY7	(MCLK / 7)
-
-/*
- * This is the counter value.  We tick at 200Hz on this platform.
- */
-#define COUNT	((CLKBY7 + (HZ / 2)) / HZ)
-
-/*
- * Get the time offset from the system PIT.  Note that if we have missed an
- * interrupt, then the PIT counter will roll over (ie, be negative).
- * This actually works out to be convenient.
- */
-static u32 ebsa110_gettimeoffset(void)
-{
-	unsigned long offset, count;
-
-	__raw_writeb(0x40, PIT_CTRL);
-	count = __raw_readb(PIT_T1);
-	count |= __raw_readb(PIT_T1) << 8;
-
-	/*
-	 * If count > COUNT, make the number negative.
-	 */
-	if (count > COUNT)
-		count |= 0xffff0000;
-
-	offset = COUNT;
-	offset -= count;
-
-	/*
-	 * `offset' is in units of timer counts.  Convert
-	 * offset to units of microseconds.
-	 */
-	offset = offset * (1000000 / HZ) / COUNT;
-
-	return offset * 1000;
-}
-
-static irqreturn_t
-ebsa110_timer_interrupt(int irq, void *dev_id)
-{
-	u32 count;
-
-	/* latch and read timer 1 */
-	__raw_writeb(0x40, PIT_CTRL);
-	count = __raw_readb(PIT_T1);
-	count |= __raw_readb(PIT_T1) << 8;
-
-	count += COUNT;
-
-	__raw_writeb(count & 0xff, PIT_T1);
-	__raw_writeb(count >> 8, PIT_T1);
-
-	timer_tick();
-
-	return IRQ_HANDLED;
-}
-
-/*
- * Set up timer interrupt.
- */
-void __init ebsa110_timer_init(void)
-{
-	int irq = IRQ_EBSA110_TIMER0;
-
-	arch_gettimeoffset = ebsa110_gettimeoffset;
-
-	/*
-	 * Timer 1, mode 2, LSB/MSB
-	 */
-	__raw_writeb(0x70, PIT_CTRL);
-	__raw_writeb(COUNT & 0xff, PIT_T1);
-	__raw_writeb(COUNT >> 8, PIT_T1);
-
-	if (request_irq(irq, ebsa110_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
-			"EBSA110 Timer Tick", NULL))
-		pr_err("Failed to request irq %d (EBSA110 Timer Tick)\n", irq);
-}
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.iobase		= 0x3f8,
-		.irq		= 1,
-		.uartclk	= 1843200,
-		.regshift	= 0,
-		.iotype		= UPIO_PORT,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{
-		.iobase		= 0x2f8,
-		.irq		= 2,
-		.uartclk	= 1843200,
-		.regshift	= 0,
-		.iotype		= UPIO_PORT,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{ },
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
-
-static struct resource am79c961_resources[] = {
-	{
-		.start		= 0x220,
-		.end		= 0x238,
-		.flags		= IORESOURCE_IO,
-	}, {
-		.start		= IRQ_EBSA110_ETHERNET,
-		.end		= IRQ_EBSA110_ETHERNET,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device am79c961_device = {
-	.name			= "am79c961",
-	.id			= -1,
-	.num_resources		= ARRAY_SIZE(am79c961_resources),
-	.resource		= am79c961_resources,
-};
-
-static struct platform_device *ebsa110_devices[] = {
-	&serial_device,
-	&am79c961_device,
-};
-
-/*
- * EBSA110 idling methodology:
- *
- * We can not execute the "wait for interrupt" instruction since that
- * will stop our MCLK signal (which provides the clock for the glue
- * logic, and therefore the timer interrupt).
- *
- * Instead, we spin, polling the IRQ_STAT register for the occurrence
- * of any interrupt with core clock down to the memory clock.
- */
-static void ebsa110_idle(void)
-{
-	const char *irq_stat = (char *)0xff000000;
-
-	/* disable clock switching */
-	asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
-
-	/* wait for an interrupt to occur */
-	while (!*irq_stat);
-
-	/* enable clock switching */
-	asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
-}
-
-static int __init ebsa110_init(void)
-{
-	arm_pm_idle = ebsa110_idle;
-	return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices));
-}
-
-arch_initcall(ebsa110_init);
-
-static void ebsa110_restart(enum reboot_mode mode, const char *cmd)
-{
-	soft_restart(0x80000000);
-}
-
-MACHINE_START(EBSA110, "EBSA110")
-	/* Maintainer: Russell King */
-	.atag_offset	= 0x400,
-	.reserve_lp0	= 1,
-	.reserve_lp2	= 1,
-	.map_io		= ebsa110_map_io,
-	.init_early	= ebsa110_init_early,
-	.init_irq	= ebsa110_init_irq,
-	.init_time	= ebsa110_timer_init,
-	.restart	= ebsa110_restart,
-MACHINE_END