summaryrefslogtreecommitdiff
path: root/arch/arm/mach-imx
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2020-10-24 20:33:08 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2020-10-24 20:33:08 +0300
commite731f3146ff3bba5424b40140e1a7e6f92e94964 (patch)
treec926040385de8b020763f0d2338e0ccbf42bac45 /arch/arm/mach-imx
parent1f70935f637dfba226bf77182c2629fde61ed06e (diff)
parentaccdab6d9e8f715068d91ee0ca0424a6999f0d19 (diff)
downloadlinux-e731f3146ff3bba5424b40140e1a7e6f92e94964.tar.xz
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson: "SoC changes, a substantial part of this is cleanup of some of the older platforms that used to have a bunch of board files. In particular: - Remove non-DT i.MX platforms that haven't seen activity in years, it's time to remove them. - A bunch of cleanup and removal of platform data for TI/OMAP platforms, moving over to genpd for power/reset control (yay!) - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them closer to multiplatform support (not quite there yet, but getting close). There are a few other changes too, smaller fixlets, etc. For new platform support, the primary ones are: - New SoC: Hisilicon SD5203, ARM926EJ-S platform. - Cpufreq support for i.MX7ULP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits) ARM: mstar: Select MStar intc ARM: stm32: Replace HTTP links with HTTPS ones ARM: debug: add UART early console support for SD5203 ARM: hisi: add support for SD5203 SoC ARM: omap3: enable off mode automatically clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: s3c64xx: bring back notes from removed debug-macro.S ARM: s3c24xx: fix Wunused-variable warning on !MMU ARM: samsung: fix PM debug build with DEBUG_LL but !MMU MAINTAINERS: mark linux-samsung-soc list non-moderated ARM: imx: Remove remnant board file support pieces ...
Diffstat (limited to 'arch/arm/mach-imx')
-rw-r--r--arch/arm/mach-imx/3ds_debugboard.c207
-rw-r--r--arch/arm/mach-imx/3ds_debugboard.h11
-rw-r--r--arch/arm/mach-imx/Kconfig375
-rw-r--r--arch/arm/mach-imx/Makefile45
-rw-r--r--arch/arm/mach-imx/board-mx31lilly.h28
-rw-r--r--arch/arm/mach-imx/board-mx31lite.h29
-rw-r--r--arch/arm/mach-imx/board-mx31moboard.h30
-rw-r--r--arch/arm/mach-imx/common.h15
-rw-r--r--arch/arm/mach-imx/cpu-imx27.c10
-rw-r--r--arch/arm/mach-imx/cpu-imx31.c9
-rw-r--r--arch/arm/mach-imx/cpu-imx35.c9
-rw-r--r--arch/arm/mach-imx/devices-imx21.h56
-rw-r--r--arch/arm/mach-imx/devices-imx27.h86
-rw-r--r--arch/arm/mach-imx/devices-imx31.h80
-rw-r--r--arch/arm/mach-imx/devices-imx35.h87
-rw-r--r--arch/arm/mach-imx/devices/Kconfig71
-rw-r--r--arch/arm/mach-imx/devices/Makefile28
-rw-r--r--arch/arm/mach-imx/devices/devices-common.h293
-rw-r--r--arch/arm/mach-imx/devices/devices.c35
-rw-r--r--arch/arm/mach-imx/devices/platform-fec.c49
-rw-r--r--arch/arm/mach-imx/devices/platform-flexcan.c45
-rw-r--r--arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c51
-rw-r--r--arch/arm/mach-imx/devices/platform-gpio-mxc.c31
-rw-r--r--arch/arm/mach-imx/devices/platform-gpio_keys.c15
-rw-r--r--arch/arm/mach-imx/devices/platform-imx-dma.c44
-rw-r--r--arch/arm/mach-imx/devices/platform-imx-fb.c47
-rw-r--r--arch/arm/mach-imx/devices/platform-imx-i2c.c74
-rw-r--r--arch/arm/mach-imx/devices/platform-imx-keypad.c54
-rw-r--r--arch/arm/mach-imx/devices/platform-imx-ssi.c86
-rw-r--r--arch/arm/mach-imx/devices/platform-imx-uart.c92
-rw-r--r--arch/arm/mach-imx/devices/platform-imx2-wdt.c52
-rw-r--r--arch/arm/mach-imx/devices/platform-imx21-hcd.c38
-rw-r--r--arch/arm/mach-imx/devices/platform-imx27-coda.c34
-rw-r--r--arch/arm/mach-imx/devices/platform-ipu-core.c127
-rw-r--r--arch/arm/mach-imx/devices/platform-mx2-camera.c59
-rw-r--r--arch/arm/mach-imx/devices/platform-mx2-emma.c37
-rw-r--r--arch/arm/mach-imx/devices/platform-mxc-ehci.c61
-rw-r--r--arch/arm/mach-imx/devices/platform-mxc-mmc.c72
-rw-r--r--arch/arm/mach-imx/devices/platform-mxc_nand.c72
-rw-r--r--arch/arm/mach-imx/devices/platform-mxc_rtc.c43
-rw-r--r--arch/arm/mach-imx/devices/platform-mxc_w1.c47
-rw-r--r--arch/arm/mach-imx/devices/platform-pata_imx.c45
-rw-r--r--arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c64
-rw-r--r--arch/arm/mach-imx/devices/platform-spi_imx.c78
-rw-r--r--arch/arm/mach-imx/ehci-imx27.c74
-rw-r--r--arch/arm/mach-imx/ehci-imx31.c74
-rw-r--r--arch/arm/mach-imx/ehci-imx35.c89
-rw-r--r--arch/arm/mach-imx/ehci.h44
-rw-r--r--arch/arm/mach-imx/hardware.h1
-rw-r--r--arch/arm/mach-imx/imx27-dt.c26
-rw-r--r--arch/arm/mach-imx/iomux-imx31.c161
-rw-r--r--arch/arm/mach-imx/iomux-mx21.h109
-rw-r--r--arch/arm/mach-imx/iomux-mx27.h192
-rw-r--r--arch/arm/mach-imx/iomux-mx2x.h217
-rw-r--r--arch/arm/mach-imx/iomux-mx3.h706
-rw-r--r--arch/arm/mach-imx/iomux-mx35.h1254
-rw-r--r--arch/arm/mach-imx/iomux-v1.c174
-rw-r--r--arch/arm/mach-imx/iomux-v1.h81
-rw-r--r--arch/arm/mach-imx/iomux-v3.c65
-rw-r--r--arch/arm/mach-imx/iomux-v3.h130
-rw-r--r--arch/arm/mach-imx/mach-armadillo5x0.c562
-rw-r--r--arch/arm/mach-imx/mach-bug.c54
-rw-r--r--arch/arm/mach-imx/mach-imx27.c81
-rw-r--r--arch/arm/mach-imx/mach-imx27_visstrim_m10.c562
-rw-r--r--arch/arm/mach-imx/mach-imx31.c (renamed from arch/arm/mach-imx/imx31-dt.c)0
-rw-r--r--arch/arm/mach-imx/mach-imx35.c (renamed from arch/arm/mach-imx/imx35-dt.c)0
-rw-r--r--arch/arm/mach-imx/mach-imx7ulp.c3
-rw-r--r--arch/arm/mach-imx/mach-kzm_arm11_01.c291
-rw-r--r--arch/arm/mach-imx/mach-mx21ads.c338
-rw-r--r--arch/arm/mach-imx/mach-mx27_3ds.c470
-rw-r--r--arch/arm/mach-imx/mach-mx27ads.c407
-rw-r--r--arch/arm/mach-imx/mach-mx31_3ds.c615
-rw-r--r--arch/arm/mach-imx/mach-mx31ads.c579
-rw-r--r--arch/arm/mach-imx/mach-mx31lilly.c312
-rw-r--r--arch/arm/mach-imx/mach-mx31lite.c290
-rw-r--r--arch/arm/mach-imx/mach-mx31moboard.c581
-rw-r--r--arch/arm/mach-imx/mach-mx35_3ds.c516
-rw-r--r--arch/arm/mach-imx/mach-pca100.c426
-rw-r--r--arch/arm/mach-imx/mach-pcm037.c585
-rw-r--r--arch/arm/mach-imx/mach-pcm037_eet.c166
-rw-r--r--arch/arm/mach-imx/mach-pcm043.c412
-rw-r--r--arch/arm/mach-imx/mach-qong.c262
-rw-r--r--arch/arm/mach-imx/mach-vpr200.c306
-rw-r--r--arch/arm/mach-imx/mm-imx21.c84
-rw-r--r--arch/arm/mach-imx/mm-imx27.c88
-rw-r--r--arch/arm/mach-imx/mm-imx3.c185
-rw-r--r--arch/arm/mach-imx/mx21.h176
-rw-r--r--arch/arm/mach-imx/mx27.h196
-rw-r--r--arch/arm/mach-imx/mx31.h179
-rw-r--r--arch/arm/mach-imx/mx31lilly-db.c182
-rw-r--r--arch/arm/mach-imx/mx31lite-db.c154
-rw-r--r--arch/arm/mach-imx/mx31moboard-devboard.c238
-rw-r--r--arch/arm/mach-imx/mx31moboard-marxbot.c270
-rw-r--r--arch/arm/mach-imx/mx31moboard-smartbot.c124
-rw-r--r--arch/arm/mach-imx/mx35.h173
-rw-r--r--arch/arm/mach-imx/pcm037.h18
-rw-r--r--arch/arm/mach-imx/pm-imx27.c12
-rw-r--r--arch/arm/mach-imx/ulpi.h20
98 files changed, 163 insertions, 16072 deletions
diff --git a/arch/arm/mach-imx/3ds_debugboard.c b/arch/arm/mach-imx/3ds_debugboard.c
deleted file mode 100644
index 0e018000715a..000000000000
--- a/arch/arm/mach-imx/3ds_debugboard.c
+++ /dev/null
@@ -1,207 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com>
- */
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/module.h>
-#include <linux/smsc911x.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include "3ds_debugboard.h"
-#include "hardware.h"
-
-/* LAN9217 ethernet base address */
-#define LAN9217_BASE_ADDR(n) (n + 0x0)
-/* External UART */
-#define UARTA_BASE_ADDR(n) (n + 0x8000)
-#define UARTB_BASE_ADDR(n) (n + 0x10000)
-
-#define BOARD_IO_ADDR(n) (n + 0x20000)
-/* LED switchs */
-#define LED_SWITCH_REG 0x00
-/* buttons */
-#define SWITCH_BUTTONS_REG 0x08
-/* status, interrupt */
-#define INTR_STATUS_REG 0x10
-#define INTR_MASK_REG 0x38
-#define INTR_RESET_REG 0x20
-/* magic word for debug CPLD */
-#define MAGIC_NUMBER1_REG 0x40
-#define MAGIC_NUMBER2_REG 0x48
-/* CPLD code version */
-#define CPLD_CODE_VER_REG 0x50
-/* magic word for debug CPLD */
-#define MAGIC_NUMBER3_REG 0x58
-/* module reset register*/
-#define MODULE_RESET_REG 0x60
-/* CPU ID and Personality ID */
-#define MCU_BOARD_ID_REG 0x68
-
-#define MXC_MAX_EXP_IO_LINES 16
-
-/* interrupts like external uart , external ethernet etc*/
-#define EXPIO_INT_ENET 0
-#define EXPIO_INT_XUART_A 1
-#define EXPIO_INT_XUART_B 2
-#define EXPIO_INT_BUTTON_A 3
-#define EXPIO_INT_BUTTON_B 4
-
-static void __iomem *brd_io;
-static struct irq_domain *domain;
-
-static struct resource smsc911x_resources[] = {
- {
- .flags = IORESOURCE_MEM,
- } , {
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
-};
-
-static struct platform_device smsc_lan9217_device = {
- .name = "smsc911x",
- .id = -1,
- .dev = {
- .platform_data = &smsc911x_config,
- },
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
-};
-
-static void mxc_expio_irq_handler(struct irq_desc *desc)
-{
- u32 imr_val;
- u32 int_valid;
- u32 expio_irq;
-
- /* irq = gpio irq number */
- desc->irq_data.chip->irq_mask(&desc->irq_data);
-
- imr_val = imx_readw(brd_io + INTR_MASK_REG);
- int_valid = imx_readw(brd_io + INTR_STATUS_REG) & ~imr_val;
-
- expio_irq = 0;
- for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
- if ((int_valid & 1) == 0)
- continue;
- generic_handle_irq(irq_find_mapping(domain, expio_irq));
- }
-
- desc->irq_data.chip->irq_ack(&desc->irq_data);
- desc->irq_data.chip->irq_unmask(&desc->irq_data);
-}
-
-/*
- * Disable an expio pin's interrupt by setting the bit in the imr.
- * Irq is an expio virtual irq number
- */
-static void expio_mask_irq(struct irq_data *d)
-{
- u16 reg;
- u32 expio = d->hwirq;
-
- reg = imx_readw(brd_io + INTR_MASK_REG);
- reg |= (1 << expio);
- imx_writew(reg, brd_io + INTR_MASK_REG);
-}
-
-static void expio_ack_irq(struct irq_data *d)
-{
- u32 expio = d->hwirq;
-
- imx_writew(1 << expio, brd_io + INTR_RESET_REG);
- imx_writew(0, brd_io + INTR_RESET_REG);
- expio_mask_irq(d);
-}
-
-static void expio_unmask_irq(struct irq_data *d)
-{
- u16 reg;
- u32 expio = d->hwirq;
-
- reg = imx_readw(brd_io + INTR_MASK_REG);
- reg &= ~(1 << expio);
- imx_writew(reg, brd_io + INTR_MASK_REG);
-}
-
-static struct irq_chip expio_irq_chip = {
- .irq_ack = expio_ack_irq,
- .irq_mask = expio_mask_irq,
- .irq_unmask = expio_unmask_irq,
-};
-
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
-};
-
-int __init mxc_expio_init(u32 base, u32 intr_gpio)
-{
- u32 p_irq = gpio_to_irq(intr_gpio);
- int irq_base;
- int i;
-
- brd_io = ioremap(BOARD_IO_ADDR(base), SZ_4K);
- if (brd_io == NULL)
- return -ENOMEM;
-
- if ((imx_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) ||
- (imx_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) ||
- (imx_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) {
- pr_info("3-Stack Debug board not detected\n");
- iounmap(brd_io);
- brd_io = NULL;
- return -ENODEV;
- }
-
- pr_info("3-Stack Debug board detected, rev = 0x%04X\n",
- readw(brd_io + CPLD_CODE_VER_REG));
-
- /*
- * Configure INT line as GPIO input
- */
- gpio_request(intr_gpio, "expio_pirq");
- gpio_direction_input(intr_gpio);
-
- /* disable the interrupt and clear the status */
- imx_writew(0, brd_io + INTR_MASK_REG);
- imx_writew(0xFFFF, brd_io + INTR_RESET_REG);
- imx_writew(0, brd_io + INTR_RESET_REG);
- imx_writew(0x1F, brd_io + INTR_MASK_REG);
-
- irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id());
- WARN_ON(irq_base < 0);
-
- domain = irq_domain_add_legacy(NULL, MXC_MAX_EXP_IO_LINES, irq_base, 0,
- &irq_domain_simple_ops, NULL);
- WARN_ON(!domain);
-
- for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) {
- irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq);
- irq_clear_status_flags(i, IRQ_NOREQUEST);
- }
- irq_set_irq_type(p_irq, IRQF_TRIGGER_LOW);
- irq_set_chained_handler(p_irq, mxc_expio_irq_handler);
-
- /* Register Lan device on the debugboard */
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- smsc911x_resources[0].start = LAN9217_BASE_ADDR(base);
- smsc911x_resources[0].end = LAN9217_BASE_ADDR(base) + 0x100 - 1;
- smsc911x_resources[1].start = irq_find_mapping(domain, EXPIO_INT_ENET);
- smsc911x_resources[1].end = irq_find_mapping(domain, EXPIO_INT_ENET);
- platform_device_register(&smsc_lan9217_device);
-
- return 0;
-}
diff --git a/arch/arm/mach-imx/3ds_debugboard.h b/arch/arm/mach-imx/3ds_debugboard.h
deleted file mode 100644
index a4d04d099c61..000000000000
--- a/arch/arm/mach-imx/3ds_debugboard.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-#ifndef __ASM_ARCH_MXC_3DS_DB_H__
-#define __ASM_ARCH_MXC_3DS_DB_H__
-
-extern int __init mxc_expio_init(u32 base, u32 intr_gpio);
-
-#endif /* __ASM_ARCH_MXC_3DS_DB_H__ */
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index e7d7b90e2cf8..52902782cc5f 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -47,371 +47,26 @@ config HAVE_IMX_SRC
def_bool y if SMP
select ARCH_HAS_RESET_CONTROLLER
-config IMX_HAVE_IOMUX_V1
- bool
+if ARCH_MULTI_V6
-config ARCH_MXC_IOMUX_V3
- bool
-
-config SOC_IMX21
- bool
- select CPU_ARM926T
- select IMX_HAVE_IOMUX_V1
- select MXC_AVIC
-
-config SOC_IMX27
- bool
- select CPU_ARM926T
- select IMX_HAVE_IOMUX_V1
- select MXC_AVIC
- select PINCTRL_IMX27
+comment "ARM1136 platforms"
config SOC_IMX31
- bool
+ bool "i.MX31 support"
select CPU_V6
select MXC_AVIC
+ help
+ This enables support for Freescale i.MX31 processor
config SOC_IMX35
- bool
- select ARCH_MXC_IOMUX_V3
+ bool "i.MX35 support"
select MXC_AVIC
select PINCTRL_IMX35
-
-if ARCH_MULTI_V5
-
-comment "MX21 platforms:"
-
-config MACH_MX21ADS
- bool "MX21ADS platform"
- select IMX_HAVE_PLATFORM_IMX_FB
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_MXC_NAND
- select SOC_IMX21
- help
- Include support for MX21ADS platform. This includes specific
- configurations for the board and its peripherals.
-
-comment "MX27 platforms:"
-
-config MACH_MX27ADS
- bool "MX27ADS platform"
- select IMX_HAVE_PLATFORM_IMX_FB
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_MXC_W1
- select SOC_IMX27
- help
- Include support for MX27ADS platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX27_3DS
- bool "MX27PDK platform"
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_FB
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_KEYPAD
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MX2_CAMERA
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_SPI_IMX
- select MXC_DEBUG_BOARD
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX27
- help
- Include support for MX27PDK platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_IMX27_VISSTRIM_M10
- bool "Vista Silicon i.MX27 Visstrim_m10"
- select IMX_HAVE_PLATFORM_GPIO_KEYS
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MX2_CAMERA
- select IMX_HAVE_PLATFORM_MX2_EMMA
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select LEDS_GPIO_REGISTER
- select SOC_IMX27
- help
- Include support for Visstrim_m10 platform and its different variants.
- This includes specific configurations for the board and its
- peripherals.
-
-config MACH_PCA100
- bool "Phytec phyCARD-s (pca100)"
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_FB
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_MXC_W1
- select IMX_HAVE_PLATFORM_SPI_IMX
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX27
- help
- Include support for phyCARD-s (aka pca100) platform. This
- includes specific configurations for the module and its peripherals.
-
-config MACH_IMX27_DT
- bool "Support i.MX27 platforms from device tree"
- select SOC_IMX27
- help
- Include support for Freescale i.MX27 based platforms
- using the device tree for discovery
-
-endif
-
-if ARCH_MULTI_V6
-
-comment "MX31 platforms:"
-
-config MACH_MX31ADS
- bool "Support MX31ADS platforms"
- default y
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IMX_UART
- select SOC_IMX31
- help
- Include support for MX31ADS platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX31ADS_WM1133_EV1
- bool "Support Wolfson Microelectronics 1133-EV1 module"
- depends on MACH_MX31ADS
- depends on MFD_WM8350_I2C
- depends on REGULATOR_WM8350 = y
help
- Include support for the Wolfson Microelectronics 1133-EV1 PMU
- and audio module for the MX31ADS platform.
-
-config MACH_MX31LILLY
- bool "Support MX31 LILLY-1131 platforms (INCO startec)"
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_SPI_IMX
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX31
- help
- Include support for mx31 based LILLY1131 modules. This includes
- specific configurations for the board and its peripherals.
-
-config MACH_MX31LITE
- bool "Support MX31 LITEKIT (LogicPD)"
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_MXC_RTC
- select IMX_HAVE_PLATFORM_SPI_IMX
- select LEDS_GPIO_REGISTER
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX31
- help
- Include support for MX31 LITEKIT platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_PCM037
- bool "Support Phytec pcm037 (i.MX31) platforms"
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_MXC_W1
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX31
- help
- Include support for Phytec pcm037 platform. This includes
- specific configurations for the board and its peripherals.
-
-config MACH_PCM037_EET
- bool "Support pcm037 EET board extensions"
- depends on MACH_PCM037
- select IMX_HAVE_PLATFORM_GPIO_KEYS
- select IMX_HAVE_PLATFORM_SPI_IMX
- help
- Add support for PCM037 EET baseboard extensions. If you are using the
- OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
- command-line parameter.
-
-config MACH_MX31_3DS
- bool "Support MX31PDK (3DS)"
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_KEYPAD
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SPI_IMX
- select MXC_DEBUG_BOARD
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX31
- help
- Include support for MX31PDK (3DS) platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX31_3DS_MXC_NAND_USE_BBT
- bool "Make the MXC NAND driver use the in flash Bad Block Table"
- depends on MACH_MX31_3DS
- depends on MTD_NAND_MXC
- help
- Enable this if you want that the MXC NAND driver uses the in flash
- Bad Block Table to know what blocks are bad instead of scanning the
- entire flash looking for bad block markers.
-
-config MACH_MX31MOBOARD
- bool "Support mx31moboard platforms (EPFL Mobots group)"
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_SPI_IMX
- select LEDS_GPIO_REGISTER
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX31
- help
- Include support for mx31moboard platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_QONG
- bool "Support Dave/DENX QongEVB-LITE platform"
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_UART
- select SOC_IMX31
- help
- Include support for Dave/DENX QongEVB-LITE platform. This includes
- specific configurations for the board and its peripherals.
-
-config MACH_ARMADILLO5X0
- bool "Support Atmark Armadillo-500 Development Base Board"
- select IMX_HAVE_PLATFORM_GPIO_KEYS
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_MXC_NAND
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX31
- help
- Include support for Atmark Armadillo-500 platform. This includes
- specific configurations for the board and its peripherals.
-
-config MACH_KZM_ARM11_01
- bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
- select IMX_HAVE_PLATFORM_IMX_UART
- select SOC_IMX31
- help
- Include support for KZM-ARM11-01. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_BUG
- bool "Support Buglabs BUGBase platform"
- default y
- select IMX_HAVE_PLATFORM_IMX_UART
- select SOC_IMX31
- help
- Include support for BUGBase 1.3 platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_IMX31_DT
- bool "Support i.MX31 platforms from device tree"
- select SOC_IMX31
- help
- Include support for Freescale i.MX31 based platforms
- using the device tree for discovery.
-
-comment "MX35 platforms:"
-
-config MACH_IMX35_DT
- bool "Support i.MX35 platforms from device tree"
- select SOC_IMX35
- help
- Include support for Freescale i.MX35 based platforms
- using the device tree for discovery.
-
-config MACH_PCM043
- bool "Support Phytec pcm043 (i.MX35) platforms"
- select IMX_HAVE_PLATFORM_FLEXCAN
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX35
- help
- Include support for Phytec pcm043 platform. This includes
- specific configurations for the board and its peripherals.
-
-config MACH_MX35_3DS
- bool "Support MX35PDK platform"
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_FB
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_MXC_RTC
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select MXC_DEBUG_BOARD
- select SOC_IMX35
- help
- Include support for MX35PDK platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_VPR200
- bool "Support VPR200 platform"
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_GPIO_KEYS
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select SOC_IMX35
- help
- Include support for VPR200 platform. This includes specific
- configurations for the board and its peripherals.
+ This enables support for Freescale i.MX31 processor
endif
-comment "Device tree only"
-
if ARCH_MULTI_V4T
config SOC_IMX1
@@ -428,12 +83,20 @@ if ARCH_MULTI_V5
config SOC_IMX25
bool "i.MX25 support"
- select ARCH_MXC_IOMUX_V3
select CPU_ARM926T
select MXC_AVIC
select PINCTRL_IMX25
help
This enables support for Freescale i.MX25 processor
+
+config SOC_IMX27
+ bool "i.MX27 support"
+ select CPU_ARM926T
+ select MXC_AVIC
+ select PINCTRL_IMX27
+ help
+ This enables support for Freescale i.MX27 processor
+
endif
if ARCH_MULTI_V7
@@ -541,10 +204,10 @@ config SOC_LS1021A
endif
-comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms"
-
if ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M
+comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms"
+
config SOC_IMX7D_CA7
bool
select ARM_GIC
@@ -607,6 +270,4 @@ endchoice
endif
-source "arch/arm/mach-imx/devices/Kconfig"
-
endif
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index e7364e6c8c6b..9cebd360d58e 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -1,22 +1,16 @@
# SPDX-License-Identifier: GPL-2.0
obj-y := cpu.o system.o irq-common.o
-obj-$(CONFIG_SOC_IMX21) += mm-imx21.o
-
obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o pm-imx25.o
-obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
-obj-$(CONFIG_SOC_IMX27) += mm-imx27.o ehci-imx27.o
+obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o mach-imx27.o
-obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o iomux-imx31.o ehci-imx31.o
-obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o ehci-imx35.o
+obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o mach-imx31.o
+obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o mach-imx35.o
imx5-pm-$(CONFIG_PM) += pm-imx5.o
obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o $(imx5-pm-y)
-obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
-obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
-
obj-$(CONFIG_MXC_TZIC) += tzic.o
obj-$(CONFIG_MXC_AVIC) += avic.o
@@ -37,37 +31,6 @@ obj-y += ssi-fiq.o
obj-y += ssi-fiq-ksym.o
endif
-# i.MX21 based machines
-obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
-
-# i.MX27 based machines
-obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
-obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
-obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o
-obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
-obj-$(CONFIG_MACH_IMX27_DT) += imx27-dt.o
-
-# i.MX31 based machines
-obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o
-obj-$(CONFIG_MACH_MX31LILLY) += mach-mx31lilly.o mx31lilly-db.o
-obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o
-obj-$(CONFIG_MACH_PCM037) += mach-pcm037.o
-obj-$(CONFIG_MACH_PCM037_EET) += mach-pcm037_eet.o
-obj-$(CONFIG_MACH_MX31_3DS) += mach-mx31_3ds.o
-obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \
- mx31moboard-marxbot.o mx31moboard-smartbot.o
-obj-$(CONFIG_MACH_QONG) += mach-qong.o
-obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
-obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o
-obj-$(CONFIG_MACH_BUG) += mach-bug.o
-obj-$(CONFIG_MACH_IMX31_DT) += imx31-dt.o
-
-# i.MX35 based machines
-obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
-obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
-obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
-obj-$(CONFIG_MACH_IMX35_DT) += imx35-dt.o
-
obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o
obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
@@ -105,5 +68,3 @@ obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
obj-$(CONFIG_SOC_VF610) += mach-vf610.o
obj-$(CONFIG_SOC_LS1021A) += mach-ls1021a.o
-
-obj-y += devices/
diff --git a/arch/arm/mach-imx/board-mx31lilly.h b/arch/arm/mach-imx/board-mx31lilly.h
deleted file mode 100644
index 3508c598c588..000000000000
--- a/arch/arm/mach-imx/board-mx31lilly.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
- *
- * Based on code for mobots boards,
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
-#define __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
-
-#ifndef __ASSEMBLY__
-
-enum mx31lilly_boards {
- MX31LILLY_NOBOARD = 0,
- MX31LILLY_DB = 1,
-};
-
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls the baseboard's init function.
- */
-
-extern void mx31lilly_db_init(void);
-
-#endif
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX31LILLY_H__ */
diff --git a/arch/arm/mach-imx/board-mx31lite.h b/arch/arm/mach-imx/board-mx31lite.h
deleted file mode 100644
index 7d7c6219b25f..000000000000
--- a/arch/arm/mach-imx/board-mx31lite.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
- *
- * Based on code for mobots boards,
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
-#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
-
-#ifndef __ASSEMBLY__
-
-enum mx31lite_boards {
- MX31LITE_NOBOARD = 0,
- MX31LITE_DB = 1,
-};
-
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls the baseboard's init function.
- */
-
-extern void mx31lite_db_init(void);
-
-#endif
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
diff --git a/arch/arm/mach-imx/board-mx31moboard.h b/arch/arm/mach-imx/board-mx31moboard.h
deleted file mode 100644
index 6f3ff4d4ebc1..000000000000
--- a/arch/arm/mach-imx/board-mx31moboard.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
-#define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
-
-#ifndef __ASSEMBLY__
-
-enum mx31moboard_boards {
- MX31NOBOARD = 0,
- MX31DEVBOARD = 1,
- MX31MARXBOT = 2,
- MX31SMARTBOT = 3,
- MX31EYEBOT = 4,
-};
-
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls the baseboard's init function.
- */
-
-extern void mx31moboard_devboard_init(void);
-extern void mx31moboard_marxbot_init(void);
-extern void mx31moboard_smartbot_init(int board);
-
-#endif
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__ */
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 72c3fcc32910..2d76e2c6c99e 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -17,29 +17,14 @@ struct device_node;
enum mxc_cpu_pwr_mode;
struct of_device_id;
-void mx21_map_io(void);
-void mx27_map_io(void);
void mx31_map_io(void);
void mx35_map_io(void);
void imx21_init_early(void);
-void imx27_init_early(void);
void imx31_init_early(void);
void imx35_init_early(void);
void mxc_init_irq(void __iomem *);
-void mx21_init_irq(void);
-void mx27_init_irq(void);
void mx31_init_irq(void);
void mx35_init_irq(void);
-void imx21_soc_init(void);
-void imx27_soc_init(void);
-void imx31_soc_init(void);
-void imx35_soc_init(void);
-int mx21_clocks_init(unsigned long lref, unsigned long fref);
-int mx27_clocks_init(unsigned long fref);
-int mx31_clocks_init(unsigned long fref);
-int mx35_clocks_init(void);
-struct platform_device *mxc_register_gpio(char *name, int id,
- resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
void mxc_set_cpu_type(unsigned int type);
void mxc_restart(enum reboot_mode, const char *);
void mxc_arch_reset_init(void __iomem *);
diff --git a/arch/arm/mach-imx/cpu-imx27.c b/arch/arm/mach-imx/cpu-imx27.c
index a969aa71b60f..bf70e13bbe9e 100644
--- a/arch/arm/mach-imx/cpu-imx27.c
+++ b/arch/arm/mach-imx/cpu-imx27.c
@@ -9,6 +9,7 @@
*/
#include <linux/io.h>
+#include <linux/of_address.h>
#include <linux/module.h>
#include "hardware.h"
@@ -17,16 +18,23 @@ static int mx27_cpu_rev = -1;
static int mx27_cpu_partnumber;
#define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */
+#define SYSCTRL_OFFSET 0x800 /* Offset from CCM base address */
static int mx27_read_cpu_rev(void)
{
+ void __iomem *ccm_base;
+ struct device_node *np;
u32 val;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx27-ccm");
+ ccm_base = of_iomap(np, 0);
+ BUG_ON(!ccm_base);
/*
* now we have access to the IO registers. As we need
* the silicon revision very early we read it here to
* avoid any further hooks
*/
- val = imx_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR + SYS_CHIP_ID));
+ val = imx_readl(ccm_base + SYSCTRL_OFFSET + SYS_CHIP_ID);
mx27_cpu_partnumber = (int)((val >> 12) & 0xFFFF);
diff --git a/arch/arm/mach-imx/cpu-imx31.c b/arch/arm/mach-imx/cpu-imx31.c
index 3ee684b71006..b9c24b851d1a 100644
--- a/arch/arm/mach-imx/cpu-imx31.c
+++ b/arch/arm/mach-imx/cpu-imx31.c
@@ -6,6 +6,7 @@
*/
#include <linux/module.h>
+#include <linux/of_address.h>
#include <linux/io.h>
#include "common.h"
@@ -32,10 +33,16 @@ static struct {
static int mx31_read_cpu_rev(void)
{
+ void __iomem *iim_base;
+ struct device_node *np;
u32 i, srev;
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx31-iim");
+ iim_base = of_iomap(np, 0);
+ BUG_ON(!iim_base);
+
/* read SREV register from IIM module */
- srev = imx_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV));
+ srev = imx_readl(iim_base + MXC_IIMSREV);
srev &= 0xff;
for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
diff --git a/arch/arm/mach-imx/cpu-imx35.c b/arch/arm/mach-imx/cpu-imx35.c
index ebb3cdabd506..80e7d8ab9f1b 100644
--- a/arch/arm/mach-imx/cpu-imx35.c
+++ b/arch/arm/mach-imx/cpu-imx35.c
@@ -5,6 +5,7 @@
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
*/
#include <linux/module.h>
+#include <linux/of_address.h>
#include <linux/io.h>
#include "hardware.h"
@@ -14,9 +15,15 @@ static int mx35_cpu_rev = -1;
static int mx35_read_cpu_rev(void)
{
+ void __iomem *iim_base;
+ struct device_node *np;
u32 rev;
- rev = imx_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx35-iim");
+ iim_base = of_iomap(np, 0);
+ BUG_ON(!iim_base);
+
+ rev = imx_readl(iim_base + MXC_IIMSREV);
switch (rev) {
case 0x00:
return IMX_CHIP_REVISION_1_0;
diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h
deleted file mode 100644
index 3679d1de84d4..000000000000
--- a/arch/arm/mach-imx/devices-imx21.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "devices/devices-common.h"
-
-extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data;
-#define imx21_add_imx21_hcd(pdata) \
- imx_add_imx21_hcd(&imx21_imx21_hcd_data, pdata)
-
-extern const struct imx_imx2_wdt_data imx21_imx2_wdt_data;
-#define imx21_add_imx2_wdt() \
- imx_add_imx2_wdt(&imx21_imx2_wdt_data)
-
-extern const struct imx_imx_fb_data imx21_imx_fb_data;
-#define imx21_add_imx_fb(pdata) \
- imx_add_imx_fb(&imx21_imx_fb_data, pdata)
-
-extern const struct imx_imx_i2c_data imx21_imx_i2c_data;
-#define imx21_add_imx_i2c(pdata) \
- imx_add_imx_i2c(&imx21_imx_i2c_data, pdata)
-
-extern const struct imx_imx_keypad_data imx21_imx_keypad_data;
-#define imx21_add_imx_keypad(pdata) \
- imx_add_imx_keypad(&imx21_imx_keypad_data, pdata)
-
-extern const struct imx_imx_ssi_data imx21_imx_ssi_data[];
-#define imx21_add_imx_ssi(id, pdata) \
- imx_add_imx_ssi(&imx21_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[];
-#define imx21_add_imx_uart(id, pdata) \
- imx_add_imx_uart_1irq(&imx21_imx_uart_data[id], pdata)
-#define imx21_add_imx_uart0(pdata) imx21_add_imx_uart(0, pdata)
-#define imx21_add_imx_uart1(pdata) imx21_add_imx_uart(1, pdata)
-#define imx21_add_imx_uart2(pdata) imx21_add_imx_uart(2, pdata)
-#define imx21_add_imx_uart3(pdata) imx21_add_imx_uart(3, pdata)
-
-extern const struct imx_mxc_mmc_data imx21_mxc_mmc_data[];
-#define imx21_add_mxc_mmc(id, pdata) \
- imx_add_mxc_mmc(&imx21_mxc_mmc_data[id], pdata)
-
-extern const struct imx_mxc_nand_data imx21_mxc_nand_data;
-#define imx21_add_mxc_nand(pdata) \
- imx_add_mxc_nand(&imx21_mxc_nand_data, pdata)
-
-extern const struct imx_mxc_w1_data imx21_mxc_w1_data;
-#define imx21_add_mxc_w1() \
- imx_add_mxc_w1(&imx21_mxc_w1_data)
-
-extern const struct imx_spi_imx_data imx21_cspi_data[];
-#define imx21_add_cspi(id, pdata) \
- imx_add_spi_imx(&imx21_cspi_data[id], pdata)
-#define imx21_add_spi_imx0(pdata) imx21_add_cspi(0, pdata)
-#define imx21_add_spi_imx1(pdata) imx21_add_cspi(1, pdata)
diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h
deleted file mode 100644
index 583a1d773d68..000000000000
--- a/arch/arm/mach-imx/devices-imx27.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "devices/devices-common.h"
-
-extern const struct imx_fec_data imx27_fec_data;
-#define imx27_add_fec(pdata) \
- imx_add_fec(&imx27_fec_data, pdata)
-
-extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data;
-#define imx27_add_fsl_usb2_udc(pdata) \
- imx_add_fsl_usb2_udc(&imx27_fsl_usb2_udc_data, pdata)
-
-extern const struct imx_imx27_coda_data imx27_coda_data;
-#define imx27_add_coda() \
- imx_add_imx27_coda(&imx27_coda_data)
-
-extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data;
-#define imx27_add_imx2_wdt() \
- imx_add_imx2_wdt(&imx27_imx2_wdt_data)
-
-extern const struct imx_imx_fb_data imx27_imx_fb_data;
-#define imx27_add_imx_fb(pdata) \
- imx_add_imx_fb(&imx27_imx_fb_data, pdata)
-
-extern const struct imx_imx_i2c_data imx27_imx_i2c_data[];
-#define imx27_add_imx_i2c(id, pdata) \
- imx_add_imx_i2c(&imx27_imx_i2c_data[id], pdata)
-
-extern const struct imx_imx_keypad_data imx27_imx_keypad_data;
-#define imx27_add_imx_keypad(pdata) \
- imx_add_imx_keypad(&imx27_imx_keypad_data, pdata)
-
-extern const struct imx_imx_ssi_data imx27_imx_ssi_data[];
-#define imx27_add_imx_ssi(id, pdata) \
- imx_add_imx_ssi(&imx27_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[];
-#define imx27_add_imx_uart(id, pdata) \
- imx_add_imx_uart_1irq(&imx27_imx_uart_data[id], pdata)
-#define imx27_add_imx_uart0(pdata) imx27_add_imx_uart(0, pdata)
-#define imx27_add_imx_uart1(pdata) imx27_add_imx_uart(1, pdata)
-#define imx27_add_imx_uart2(pdata) imx27_add_imx_uart(2, pdata)
-#define imx27_add_imx_uart3(pdata) imx27_add_imx_uart(3, pdata)
-#define imx27_add_imx_uart4(pdata) imx27_add_imx_uart(4, pdata)
-#define imx27_add_imx_uart5(pdata) imx27_add_imx_uart(5, pdata)
-
-extern const struct imx_mx2_camera_data imx27_mx2_camera_data;
-#define imx27_add_mx2_camera(pdata) \
- imx_add_mx2_camera(&imx27_mx2_camera_data, pdata)
-
-extern const struct imx_mx2_emma_data imx27_mx2_emmaprp_data;
-#define imx27_add_mx2_emmaprp() \
- imx_add_mx2_emmaprp(&imx27_mx2_emmaprp_data)
-
-extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data;
-#define imx27_add_mxc_ehci_otg(pdata) \
- imx_add_mxc_ehci(&imx27_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[];
-#define imx27_add_mxc_ehci_hs(id, pdata) \
- imx_add_mxc_ehci(&imx27_mxc_ehci_hs_data[id - 1], pdata)
-
-extern const struct imx_mxc_mmc_data imx27_mxc_mmc_data[];
-#define imx27_add_mxc_mmc(id, pdata) \
- imx_add_mxc_mmc(&imx27_mxc_mmc_data[id], pdata)
-
-extern const struct imx_mxc_nand_data imx27_mxc_nand_data;
-#define imx27_add_mxc_nand(pdata) \
- imx_add_mxc_nand(&imx27_mxc_nand_data, pdata)
-
-extern const struct imx_mxc_w1_data imx27_mxc_w1_data;
-#define imx27_add_mxc_w1() \
- imx_add_mxc_w1(&imx27_mxc_w1_data)
-
-extern const struct imx_spi_imx_data imx27_cspi_data[];
-#define imx27_add_cspi(id, gtable) \
- imx_add_spi_imx(&imx27_cspi_data[id], gtable)
-#define imx27_add_spi_imx0(gtable) imx27_add_cspi(0, gtable)
-#define imx27_add_spi_imx1(gtable) imx27_add_cspi(1, gtable)
-#define imx27_add_spi_imx2(gtable) imx27_add_cspi(2, gtable)
-
-extern const struct imx_pata_imx_data imx27_pata_imx_data;
-#define imx27_add_pata_imx() \
- imx_add_pata_imx(&imx27_pata_imx_data)
diff --git a/arch/arm/mach-imx/devices-imx31.h b/arch/arm/mach-imx/devices-imx31.h
deleted file mode 100644
index f7cc62372532..000000000000
--- a/arch/arm/mach-imx/devices-imx31.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "devices/devices-common.h"
-
-extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data;
-#define imx31_add_fsl_usb2_udc(pdata) \
- imx_add_fsl_usb2_udc(&imx31_fsl_usb2_udc_data, pdata)
-
-extern const struct imx_imx2_wdt_data imx31_imx2_wdt_data;
-#define imx31_add_imx2_wdt() \
- imx_add_imx2_wdt(&imx31_imx2_wdt_data)
-
-extern const struct imx_imx_i2c_data imx31_imx_i2c_data[];
-#define imx31_add_imx_i2c(id, pdata) \
- imx_add_imx_i2c(&imx31_imx_i2c_data[id], pdata)
-#define imx31_add_imx_i2c0(pdata) imx31_add_imx_i2c(0, pdata)
-#define imx31_add_imx_i2c1(pdata) imx31_add_imx_i2c(1, pdata)
-#define imx31_add_imx_i2c2(pdata) imx31_add_imx_i2c(2, pdata)
-
-extern const struct imx_imx_keypad_data imx31_imx_keypad_data;
-#define imx31_add_imx_keypad(pdata) \
- imx_add_imx_keypad(&imx31_imx_keypad_data, pdata)
-
-extern const struct imx_imx_ssi_data imx31_imx_ssi_data[];
-#define imx31_add_imx_ssi(id, pdata) \
- imx_add_imx_ssi(&imx31_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[];
-#define imx31_add_imx_uart(id, pdata) \
- imx_add_imx_uart_1irq(&imx31_imx_uart_data[id], pdata)
-#define imx31_add_imx_uart0(pdata) imx31_add_imx_uart(0, pdata)
-#define imx31_add_imx_uart1(pdata) imx31_add_imx_uart(1, pdata)
-#define imx31_add_imx_uart2(pdata) imx31_add_imx_uart(2, pdata)
-#define imx31_add_imx_uart3(pdata) imx31_add_imx_uart(3, pdata)
-#define imx31_add_imx_uart4(pdata) imx31_add_imx_uart(4, pdata)
-
-extern const struct imx_ipu_core_data imx31_ipu_core_data;
-#define imx31_add_ipu_core() \
- imx_add_ipu_core(&imx31_ipu_core_data)
-#define imx31_alloc_mx3_camera(pdata) \
- imx_alloc_mx3_camera(&imx31_ipu_core_data, pdata)
-#define imx31_add_mx3_sdc_fb(pdata) \
- imx_add_mx3_sdc_fb(&imx31_ipu_core_data, pdata)
-
-extern const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data;
-#define imx31_add_mxc_ehci_otg(pdata) \
- imx_add_mxc_ehci(&imx31_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[];
-#define imx31_add_mxc_ehci_hs(id, pdata) \
- imx_add_mxc_ehci(&imx31_mxc_ehci_hs_data[id - 1], pdata)
-
-extern const struct imx_mxc_mmc_data imx31_mxc_mmc_data[];
-#define imx31_add_mxc_mmc(id, pdata) \
- imx_add_mxc_mmc(&imx31_mxc_mmc_data[id], pdata)
-
-extern const struct imx_mxc_nand_data imx31_mxc_nand_data;
-#define imx31_add_mxc_nand(pdata) \
- imx_add_mxc_nand(&imx31_mxc_nand_data, pdata)
-
-extern const struct imx_mxc_rtc_data imx31_mxc_rtc_data;
-#define imx31_add_mxc_rtc() \
- imx_add_mxc_rtc(&imx31_mxc_rtc_data)
-
-extern const struct imx_mxc_w1_data imx31_mxc_w1_data;
-#define imx31_add_mxc_w1() \
- imx_add_mxc_w1(&imx31_mxc_w1_data)
-
-extern const struct imx_spi_imx_data imx31_cspi_data[];
-#define imx31_add_cspi(id, gtable) \
- imx_add_spi_imx(&imx31_cspi_data[id], gtable)
-#define imx31_add_spi_imx0(gtable) imx31_add_cspi(0, gtable)
-#define imx31_add_spi_imx1(gtable) imx31_add_cspi(1, gtable)
-#define imx31_add_spi_imx2(gtable) imx31_add_cspi(2, gtable)
-
-extern const struct imx_pata_imx_data imx31_pata_imx_data;
-#define imx31_add_pata_imx() \
- imx_add_pata_imx(&imx31_pata_imx_data)
diff --git a/arch/arm/mach-imx/devices-imx35.h b/arch/arm/mach-imx/devices-imx35.h
deleted file mode 100644
index 1b1bdadea15b..000000000000
--- a/arch/arm/mach-imx/devices-imx35.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "devices/devices-common.h"
-
-extern const struct imx_fec_data imx35_fec_data;
-#define imx35_add_fec(pdata) \
- imx_add_fec(&imx35_fec_data, pdata)
-
-extern const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data;
-#define imx35_add_fsl_usb2_udc(pdata) \
- imx_add_fsl_usb2_udc(&imx35_fsl_usb2_udc_data, pdata)
-
-extern const struct imx_flexcan_data imx35_flexcan_data[];
-#define imx35_add_flexcan(id) \
- imx_add_flexcan(&imx35_flexcan_data[id])
-#define imx35_add_flexcan0() imx35_add_flexcan(0)
-#define imx35_add_flexcan1() imx35_add_flexcan(1)
-
-extern const struct imx_imx2_wdt_data imx35_imx2_wdt_data;
-#define imx35_add_imx2_wdt() \
- imx_add_imx2_wdt(&imx35_imx2_wdt_data)
-
-extern const struct imx_imx_i2c_data imx35_imx_i2c_data[];
-#define imx35_add_imx_i2c(id, pdata) \
- imx_add_imx_i2c(&imx35_imx_i2c_data[id], pdata)
-#define imx35_add_imx_i2c0(pdata) imx35_add_imx_i2c(0, pdata)
-#define imx35_add_imx_i2c1(pdata) imx35_add_imx_i2c(1, pdata)
-#define imx35_add_imx_i2c2(pdata) imx35_add_imx_i2c(2, pdata)
-
-extern const struct imx_imx_keypad_data imx35_imx_keypad_data;
-#define imx35_add_imx_keypad(pdata) \
- imx_add_imx_keypad(&imx35_imx_keypad_data, pdata)
-
-extern const struct imx_imx_ssi_data imx35_imx_ssi_data[];
-#define imx35_add_imx_ssi(id, pdata) \
- imx_add_imx_ssi(&imx35_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[];
-#define imx35_add_imx_uart(id, pdata) \
- imx_add_imx_uart_1irq(&imx35_imx_uart_data[id], pdata)
-#define imx35_add_imx_uart0(pdata) imx35_add_imx_uart(0, pdata)
-#define imx35_add_imx_uart1(pdata) imx35_add_imx_uart(1, pdata)
-#define imx35_add_imx_uart2(pdata) imx35_add_imx_uart(2, pdata)
-
-extern const struct imx_ipu_core_data imx35_ipu_core_data;
-#define imx35_add_ipu_core() \
- imx_add_ipu_core(&imx35_ipu_core_data)
-#define imx35_alloc_mx3_camera(pdata) \
- imx_alloc_mx3_camera(&imx35_ipu_core_data, pdata)
-#define imx35_add_mx3_sdc_fb(pdata) \
- imx_add_mx3_sdc_fb(&imx35_ipu_core_data, pdata)
-
-extern const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data;
-#define imx35_add_mxc_ehci_otg(pdata) \
- imx_add_mxc_ehci(&imx35_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data;
-#define imx35_add_mxc_ehci_hs(pdata) \
- imx_add_mxc_ehci(&imx35_mxc_ehci_hs_data, pdata)
-
-extern const struct imx_mxc_nand_data imx35_mxc_nand_data;
-#define imx35_add_mxc_nand(pdata) \
- imx_add_mxc_nand(&imx35_mxc_nand_data, pdata)
-
-extern const struct imx_mxc_rtc_data imx35_mxc_rtc_data;
-#define imx35_add_mxc_rtc() \
- imx_add_mxc_rtc(&imx35_mxc_rtc_data)
-
-extern const struct imx_mxc_w1_data imx35_mxc_w1_data;
-#define imx35_add_mxc_w1() \
- imx_add_mxc_w1(&imx35_mxc_w1_data)
-
-extern const struct imx_sdhci_esdhc_imx_data imx35_sdhci_esdhc_imx_data[];
-#define imx35_add_sdhci_esdhc_imx(id, pdata) \
- imx_add_sdhci_esdhc_imx(&imx35_sdhci_esdhc_imx_data[id], pdata)
-
-extern const struct imx_spi_imx_data imx35_cspi_data[];
-#define imx35_add_cspi(id, pdata) \
- imx_add_spi_imx(&imx35_cspi_data[id], pdata)
-#define imx35_add_spi_imx0(pdata) imx35_add_cspi(0, pdata)
-#define imx35_add_spi_imx1(pdata) imx35_add_cspi(1, pdata)
-
-extern const struct imx_pata_imx_data imx35_pata_imx_data;
-#define imx35_add_pata_imx() \
- imx_add_pata_imx(&imx35_pata_imx_data)
diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig
deleted file mode 100644
index fdca73d117e6..000000000000
--- a/arch/arm/mach-imx/devices/Kconfig
+++ /dev/null
@@ -1,71 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config IMX_HAVE_PLATFORM_FEC
- bool
- default y if SOC_IMX25 || SOC_IMX27 || SOC_IMX35
-
-config IMX_HAVE_PLATFORM_FLEXCAN
- bool
-
-config IMX_HAVE_PLATFORM_FSL_USB2_UDC
- bool
-
-config IMX_HAVE_PLATFORM_GPIO_KEYS
- bool
-
-config IMX_HAVE_PLATFORM_IMX21_HCD
- bool
-
-config IMX_HAVE_PLATFORM_IMX27_CODA
- bool
- default y if SOC_IMX27
-
-config IMX_HAVE_PLATFORM_IMX2_WDT
- bool
-
-config IMX_HAVE_PLATFORM_IMX_FB
- bool
-
-config IMX_HAVE_PLATFORM_IMX_I2C
- bool
-
-config IMX_HAVE_PLATFORM_IMX_KEYPAD
- bool
-
-config IMX_HAVE_PLATFORM_PATA_IMX
- bool
-
-config IMX_HAVE_PLATFORM_IMX_SSI
- bool
-
-config IMX_HAVE_PLATFORM_IMX_UART
- bool
-
-config IMX_HAVE_PLATFORM_IPU_CORE
- bool
-
-config IMX_HAVE_PLATFORM_MX2_CAMERA
- bool
-
-config IMX_HAVE_PLATFORM_MX2_EMMA
- bool
-
-config IMX_HAVE_PLATFORM_MXC_EHCI
- bool
-
-config IMX_HAVE_PLATFORM_MXC_MMC
- bool
-
-config IMX_HAVE_PLATFORM_MXC_NAND
- bool
-
-config IMX_HAVE_PLATFORM_MXC_RTC
- bool
-
-config IMX_HAVE_PLATFORM_MXC_W1
- bool
-
-config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- bool
-
-config IMX_HAVE_PLATFORM_SPI_IMX
- bool
diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile
deleted file mode 100644
index e44758aaa11c..000000000000
--- a/arch/arm/mach-imx/devices/Makefile
+++ /dev/null
@@ -1,28 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y := devices.o
-
-obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o
-obj-y += platform-gpio-mxc.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX27_CODA) += platform-imx27-coda.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o
-obj-y += platform-imx-dma.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_FB) += platform-imx-fb.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_KEYPAD) += platform-imx-keypad.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_PATA_IMX) += platform-pata_imx.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IPU_CORE) += platform-ipu-core.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_EMMA) += platform-mx2-emma.o
diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h
deleted file mode 100644
index 327a1de7dce1..000000000000
--- a/arch/arm/mach-imx/devices/devices-common.h
+++ /dev/null
@@ -1,293 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/gpio/machine.h>
-#include <linux/platform_data/dma-imx-sdma.h>
-
-extern struct device mxc_aips_bus;
-extern struct device mxc_ahb_bus;
-
-static inline struct platform_device *imx_add_platform_device_dmamask(
- const char *name, int id,
- const struct resource *res, unsigned int num_resources,
- const void *data, size_t size_data, u64 dmamask)
-{
- struct platform_device_info pdevinfo = {
- .name = name,
- .id = id,
- .res = res,
- .num_res = num_resources,
- .data = data,
- .size_data = size_data,
- .dma_mask = dmamask,
- };
- return platform_device_register_full(&pdevinfo);
-}
-
-static inline struct platform_device *imx_add_platform_device(
- const char *name, int id,
- const struct resource *res, unsigned int num_resources,
- const void *data, size_t size_data)
-{
- return imx_add_platform_device_dmamask(
- name, id, res, num_resources, data, size_data, 0);
-}
-
-#include <linux/fec.h>
-struct imx_fec_data {
- const char *devid;
- resource_size_t iobase;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_fec(
- const struct imx_fec_data *data,
- const struct fec_platform_data *pdata);
-
-struct imx_flexcan_data {
- int id;
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_flexcan(
- const struct imx_flexcan_data *data);
-
-#include <linux/fsl_devices.h>
-struct imx_fsl_usb2_udc_data {
- const char *devid;
- resource_size_t iobase;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_fsl_usb2_udc(
- const struct imx_fsl_usb2_udc_data *data,
- const struct fsl_usb2_platform_data *pdata);
-
-#include <linux/gpio_keys.h>
-struct platform_device *__init imx_add_gpio_keys(
- const struct gpio_keys_platform_data *pdata);
-
-#include <linux/platform_data/usb-mx2.h>
-struct imx_imx21_hcd_data {
- resource_size_t iobase;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_imx21_hcd(
- const struct imx_imx21_hcd_data *data,
- const struct mx21_usbh_platform_data *pdata);
-
-struct imx_imx27_coda_data {
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_imx27_coda(
- const struct imx_imx27_coda_data *data);
-
-struct imx_imx2_wdt_data {
- int id;
- resource_size_t iobase;
- resource_size_t iosize;
-};
-struct platform_device *__init imx_add_imx2_wdt(
- const struct imx_imx2_wdt_data *data);
-
-struct imx_imxdi_rtc_data {
- resource_size_t iobase;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_imxdi_rtc(
- const struct imx_imxdi_rtc_data *data);
-
-#include <linux/platform_data/video-imxfb.h>
-struct imx_imx_fb_data {
- const char *devid;
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_imx_fb(
- const struct imx_imx_fb_data *data,
- const struct imx_fb_platform_data *pdata);
-
-#include <linux/platform_data/i2c-imx.h>
-struct imx_imx_i2c_data {
- const char *devid;
- int id;
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_imx_i2c(
- const struct imx_imx_i2c_data *data,
- const struct imxi2c_platform_data *pdata);
-
-#include <linux/input/matrix_keypad.h>
-struct imx_imx_keypad_data {
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_imx_keypad(
- const struct imx_imx_keypad_data *data,
- const struct matrix_keymap_data *pdata);
-
-#include <linux/platform_data/asoc-imx-ssi.h>
-struct imx_imx_ssi_data {
- int id;
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
- resource_size_t dmatx0;
- resource_size_t dmarx0;
- resource_size_t dmatx1;
- resource_size_t dmarx1;
-};
-struct platform_device *__init imx_add_imx_ssi(
- const struct imx_imx_ssi_data *data,
- const struct imx_ssi_platform_data *pdata);
-
-#include <linux/platform_data/serial-imx.h>
-struct imx_imx_uart_1irq_data {
- int id;
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_imx_uart_1irq(
- const struct imx_imx_uart_1irq_data *data,
- const struct imxuart_platform_data *pdata);
-
-#include <linux/platform_data/video-mx3fb.h>
-#include <linux/platform_data/media/camera-mx3.h>
-struct imx_ipu_core_data {
- resource_size_t iobase;
- resource_size_t synirq;
- resource_size_t errirq;
-};
-struct platform_device *__init imx_add_ipu_core(
- const struct imx_ipu_core_data *data);
-struct platform_device *__init imx_alloc_mx3_camera(
- const struct imx_ipu_core_data *data,
- const struct mx3_camera_pdata *pdata);
-struct platform_device *__init imx_add_mx3_sdc_fb(
- const struct imx_ipu_core_data *data,
- struct mx3fb_platform_data *pdata);
-
-#include <linux/platform_data/media/camera-mx2.h>
-struct imx_mx2_camera_data {
- const char *devid;
- resource_size_t iobasecsi;
- resource_size_t iosizecsi;
- resource_size_t irqcsi;
- resource_size_t iobaseemmaprp;
- resource_size_t iosizeemmaprp;
- resource_size_t irqemmaprp;
-};
-struct platform_device *__init imx_add_mx2_camera(
- const struct imx_mx2_camera_data *data,
- const struct mx2_camera_platform_data *pdata);
-
-
-struct imx_mx2_emma_data {
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_mx2_emmaprp(
- const struct imx_mx2_emma_data *data);
-
-#include <linux/platform_data/usb-ehci-mxc.h>
-struct imx_mxc_ehci_data {
- int id;
- resource_size_t iobase;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_mxc_ehci(
- const struct imx_mxc_ehci_data *data,
- const struct mxc_usbh_platform_data *pdata);
-
-#include <linux/platform_data/mmc-mxcmmc.h>
-struct imx_mxc_mmc_data {
- const char *devid;
- int id;
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
- resource_size_t dmareq;
-};
-struct platform_device *__init imx_add_mxc_mmc(
- const struct imx_mxc_mmc_data *data,
- const struct imxmmc_platform_data *pdata);
-
-#include <linux/platform_data/mtd-mxc_nand.h>
-struct imx_mxc_nand_data {
- const char *devid;
- /*
- * id is traditionally 0, but -1 is more appropriate. We use -1 for new
- * machines but don't change existing devices as the nand device usually
- * appears in the kernel command line to pass its partitioning.
- */
- int id;
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t axibase;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_mxc_nand(
- const struct imx_mxc_nand_data *data,
- const struct mxc_nand_platform_data *pdata);
-
-struct imx_pata_imx_data {
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_pata_imx(
- const struct imx_pata_imx_data *data);
-
-/* mxc_rtc */
-struct imx_mxc_rtc_data {
- const char *devid;
- resource_size_t iobase;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_mxc_rtc(
- const struct imx_mxc_rtc_data *data);
-
-/* mxc_w1 */
-struct imx_mxc_w1_data {
- resource_size_t iobase;
-};
-struct platform_device *__init imx_add_mxc_w1(
- const struct imx_mxc_w1_data *data);
-
-#include <linux/platform_data/mmc-esdhc-imx.h>
-struct imx_sdhci_esdhc_imx_data {
- const char *devid;
- int id;
- resource_size_t iobase;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_sdhci_esdhc_imx(
- const struct imx_sdhci_esdhc_imx_data *data,
- const struct esdhc_platform_data *pdata);
-
-struct imx_spi_imx_data {
- const char *devid;
- int id;
- resource_size_t iobase;
- resource_size_t iosize;
- int irq;
-};
-struct platform_device *__init imx_add_spi_imx(
- const struct imx_spi_imx_data *data, struct gpiod_lookup_table *gtable);
-
-struct platform_device *imx_add_imx_dma(char *name, resource_size_t iobase,
- int irq);
-struct platform_device *imx_add_imx_sdma(char *name,
- resource_size_t iobase, int irq, struct sdma_platform_data *pdata);
diff --git a/arch/arm/mach-imx/devices/devices.c b/arch/arm/mach-imx/devices/devices.c
deleted file mode 100644
index cd72f0894196..000000000000
--- a/arch/arm/mach-imx/devices/devices.c
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-
-#include "../common.h"
-#include "devices-common.h"
-
-struct device mxc_aips_bus = {
- .init_name = "mxc_aips",
-};
-
-struct device mxc_ahb_bus = {
- .init_name = "mxc_ahb",
-};
-
-int __init mxc_device_init(void)
-{
- int ret;
-
- ret = device_register(&mxc_aips_bus);
- if (ret < 0)
- goto done;
-
- ret = device_register(&mxc_ahb_bus);
-
-done:
- return ret;
-}
diff --git a/arch/arm/mach-imx/devices/platform-fec.c b/arch/arm/mach-imx/devices/platform-fec.c
deleted file mode 100644
index 88e853d7fb01..000000000000
--- a/arch/arm/mach-imx/devices/platform-fec.c
+++ /dev/null
@@ -1,49 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/dma-mapping.h>
-#include <linux/sizes.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_fec_data_entry_single(soc, _devid) \
- { \
- .devid = _devid, \
- .iobase = soc ## _FEC_BASE_ADDR, \
- .irq = soc ## _INT_FEC, \
- }
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_fec_data imx27_fec_data __initconst =
- imx_fec_data_entry_single(MX27, "imx27-fec");
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX35
-/* i.mx35 has the i.mx27 type fec */
-const struct imx_fec_data imx35_fec_data __initconst =
- imx_fec_data_entry_single(MX35, "imx27-fec");
-#endif
-
-struct platform_device *__init imx_add_fec(
- const struct imx_fec_data *data,
- const struct fec_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return imx_add_platform_device_dmamask(data->devid, 0,
- res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-flexcan.c b/arch/arm/mach-imx/devices/platform-flexcan.c
deleted file mode 100644
index e4eed35c1fe2..000000000000
--- a/arch/arm/mach-imx/devices/platform-flexcan.c
+++ /dev/null
@@ -1,45 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix, Marc Kleine-Budde <kernel@pengutronix.de>
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_flexcan_data_entry_single(soc, _id, _hwid, _size) \
- { \
- .id = _id, \
- .iobase = soc ## _CAN ## _hwid ## _BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_CAN ## _hwid, \
- }
-
-#define imx_flexcan_data_entry(soc, _id, _hwid, _size) \
- [_id] = imx_flexcan_data_entry_single(soc, _id, _hwid, _size)
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_flexcan_data imx35_flexcan_data[] __initconst = {
-#define imx35_flexcan_data_entry(_id, _hwid) \
- imx_flexcan_data_entry(MX35, _id, _hwid, SZ_16K)
- imx35_flexcan_data_entry(0, 1),
- imx35_flexcan_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_flexcan(
- const struct imx_flexcan_data *data)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return imx_add_platform_device("flexcan", data->id,
- res, ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
deleted file mode 100644
index cc86de4d7acb..000000000000
--- a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
+++ /dev/null
@@ -1,51 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/dma-mapping.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_fsl_usb2_udc_data_entry_single(soc, _devid) \
- { \
- .devid = _devid, \
- .iobase = soc ## _USB_OTG_BASE_ADDR, \
- .irq = soc ## _INT_USB_OTG, \
- }
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27");
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX31, "imx-udc-mx27");
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx27");
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_fsl_usb2_udc(
- const struct imx_fsl_usb2_udc_data *data,
- const struct fsl_usb2_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
- return imx_add_platform_device_dmamask(data->devid, -1,
- res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-gpio-mxc.c b/arch/arm/mach-imx/devices/platform-gpio-mxc.c
deleted file mode 100644
index 355de845224c..000000000000
--- a/arch/arm/mach-imx/devices/platform-gpio-mxc.c
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2011 Linaro Limited
- */
-#include "devices-common.h"
-#include "../common.h"
-
-struct platform_device *__init mxc_register_gpio(char *name, int id,
- resource_size_t iobase, resource_size_t iosize, int irq, int irq_high)
-{
- struct resource res[] = {
- {
- .start = iobase,
- .end = iobase + iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = irq,
- .end = irq,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = irq_high,
- .end = irq_high,
- .flags = IORESOURCE_IRQ,
- },
- };
- unsigned int nres;
-
- nres = irq_high ? ARRAY_SIZE(res) : ARRAY_SIZE(res) - 1;
- return platform_device_register_resndata(&mxc_aips_bus, name, id, res, nres, NULL, 0);
-}
diff --git a/arch/arm/mach-imx/devices/platform-gpio_keys.c b/arch/arm/mach-imx/devices/platform-gpio_keys.c
deleted file mode 100644
index 488678403ac8..000000000000
--- a/arch/arm/mach-imx/devices/platform-gpio_keys.c
+++ /dev/null
@@ -1,15 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-#include <linux/sizes.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-struct platform_device *__init imx_add_gpio_keys(
- const struct gpio_keys_platform_data *pdata)
-{
- return imx_add_platform_device("gpio-keys", -1, NULL,
- 0, pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-imx/devices/platform-imx-dma.c b/arch/arm/mach-imx/devices/platform-imx-dma.c
deleted file mode 100644
index 12656f24ad0d..000000000000
--- a/arch/arm/mach-imx/devices/platform-imx-dma.c
+++ /dev/null
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "devices-common.h"
-
-struct platform_device __init __maybe_unused *imx_add_imx_dma(char *name,
- resource_size_t iobase, int irq)
-{
- struct resource res[] = {
- {
- .start = iobase,
- .end = iobase + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = irq,
- .end = irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return platform_device_register_resndata(&mxc_ahb_bus,
- name, -1, res, ARRAY_SIZE(res), NULL, 0);
-}
-
-struct platform_device __init __maybe_unused *imx_add_imx_sdma(char *name,
- resource_size_t iobase, int irq, struct sdma_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = iobase,
- .end = iobase + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = irq,
- .end = irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return platform_device_register_resndata(&mxc_ahb_bus, name,
- -1, res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-imx/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c
deleted file mode 100644
index e553d014506a..000000000000
--- a/arch/arm/mach-imx/devices/platform-imx-fb.c
+++ /dev/null
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/dma-mapping.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_imx_fb_data_entry_single(soc, _devid, _size) \
- { \
- .devid = _devid, \
- .iobase = soc ## _LCDC_BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_LCDC, \
- }
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_imx_fb_data imx21_imx_fb_data __initconst =
- imx_imx_fb_data_entry_single(MX21, "imx21-fb", SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_imx_fb_data imx27_imx_fb_data __initconst =
- imx_imx_fb_data_entry_single(MX27, "imx21-fb", SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-struct platform_device *__init imx_add_imx_fb(
- const struct imx_imx_fb_data *data,
- const struct imx_fb_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
- return imx_add_platform_device_dmamask(data->devid, 0,
- res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-imx-i2c.c b/arch/arm/mach-imx/devices/platform-imx-i2c.c
deleted file mode 100644
index 81d317bfadd8..000000000000
--- a/arch/arm/mach-imx/devices/platform-imx-i2c.c
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size) \
- { \
- .devid = _devid, \
- .id = _id, \
- .iobase = soc ## _I2C ## _hwid ## _BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_I2C ## _hwid, \
- }
-
-#define imx_imx_i2c_data_entry(soc, _devid, _id, _hwid, _size) \
- [_id] = imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size)
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst =
- imx_imx_i2c_data_entry_single(MX21, "imx21-i2c", 0, , SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = {
-#define imx27_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX27, "imx21-i2c", _id, _hwid, SZ_4K)
- imx27_imx_i2c_data_entry(0, 1),
- imx27_imx_i2c_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = {
-#define imx31_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX31, "imx21-i2c", _id, _hwid, SZ_4K)
- imx31_imx_i2c_data_entry(0, 1),
- imx31_imx_i2c_data_entry(1, 2),
- imx31_imx_i2c_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = {
-#define imx35_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX35, "imx21-i2c", _id, _hwid, SZ_4K)
- imx35_imx_i2c_data_entry(0, 1),
- imx35_imx_i2c_data_entry(1, 2),
- imx35_imx_i2c_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_imx_i2c(
- const struct imx_imx_i2c_data *data,
- const struct imxi2c_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return imx_add_platform_device(data->devid, data->id,
- res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-imx/devices/platform-imx-keypad.c b/arch/arm/mach-imx/devices/platform-imx-keypad.c
deleted file mode 100644
index de2e03ec2d89..000000000000
--- a/arch/arm/mach-imx/devices/platform-imx-keypad.c
+++ /dev/null
@@ -1,54 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_imx_keypad_data_entry_single(soc, _size) \
- { \
- .iobase = soc ## _KPP_BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_KPP, \
- }
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_imx_keypad_data imx21_imx_keypad_data __initconst =
- imx_imx_keypad_data_entry_single(MX21, SZ_16);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_imx_keypad_data imx27_imx_keypad_data __initconst =
- imx_imx_keypad_data_entry_single(MX27, SZ_16);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_imx_keypad_data imx31_imx_keypad_data __initconst =
- imx_imx_keypad_data_entry_single(MX31, SZ_16);
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_imx_keypad_data imx35_imx_keypad_data __initconst =
- imx_imx_keypad_data_entry_single(MX35, SZ_16);
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_imx_keypad(
- const struct imx_imx_keypad_data *data,
- const struct matrix_keymap_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return imx_add_platform_device("imx-keypad", -1,
- res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-imx/devices/platform-imx-ssi.c b/arch/arm/mach-imx/devices/platform-imx-ssi.c
deleted file mode 100644
index ed8c66438af0..000000000000
--- a/arch/arm/mach-imx/devices/platform-imx-ssi.c
+++ /dev/null
@@ -1,86 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_imx_ssi_data_entry(soc, _id, _hwid, _size) \
- [_id] = { \
- .id = _id, \
- .iobase = soc ## _SSI ## _hwid ## _BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_SSI ## _hwid, \
- .dmatx0 = soc ## _DMA_REQ_SSI ## _hwid ## _TX0, \
- .dmarx0 = soc ## _DMA_REQ_SSI ## _hwid ## _RX0, \
- .dmatx1 = soc ## _DMA_REQ_SSI ## _hwid ## _TX1, \
- .dmarx1 = soc ## _DMA_REQ_SSI ## _hwid ## _RX1, \
- }
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst = {
-#define imx21_imx_ssi_data_entry(_id, _hwid) \
- imx_imx_ssi_data_entry(MX21, _id, _hwid, SZ_4K)
- imx21_imx_ssi_data_entry(0, 1),
- imx21_imx_ssi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst = {
-#define imx27_imx_ssi_data_entry(_id, _hwid) \
- imx_imx_ssi_data_entry(MX27, _id, _hwid, SZ_4K)
- imx27_imx_ssi_data_entry(0, 1),
- imx27_imx_ssi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst = {
-#define imx31_imx_ssi_data_entry(_id, _hwid) \
- imx_imx_ssi_data_entry(MX31, _id, _hwid, SZ_4K)
- imx31_imx_ssi_data_entry(0, 1),
- imx31_imx_ssi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst = {
-#define imx35_imx_ssi_data_entry(_id, _hwid) \
- imx_imx_ssi_data_entry(MX35, _id, _hwid, SZ_4K)
- imx35_imx_ssi_data_entry(0, 1),
- imx35_imx_ssi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_imx_ssi(
- const struct imx_imx_ssi_data *data,
- const struct imx_ssi_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
-#define DMARES(_name) { \
- .name = #_name, \
- .start = data->dma ## _name, \
- .end = data->dma ## _name, \
- .flags = IORESOURCE_DMA, \
-}
- DMARES(tx0),
- DMARES(rx0),
- DMARES(tx1),
- DMARES(rx1),
- };
-
- return imx_add_platform_device("imx-ssi", data->id,
- res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-imx/devices/platform-imx-uart.c b/arch/arm/mach-imx/devices/platform-imx-uart.c
deleted file mode 100644
index c8f01deedd80..000000000000
--- a/arch/arm/mach-imx/devices/platform-imx-uart.c
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_imx_uart_3irq_data_entry(soc, _id, _hwid, _size) \
- [_id] = { \
- .id = _id, \
- .iobase = soc ## _UART ## _hwid ## _BASE_ADDR, \
- .iosize = _size, \
- .irqrx = soc ## _INT_UART ## _hwid ## RX, \
- .irqtx = soc ## _INT_UART ## _hwid ## TX, \
- .irqrts = soc ## _INT_UART ## _hwid ## RTS, \
- }
-
-#define imx_imx_uart_1irq_data_entry(soc, _id, _hwid, _size) \
- [_id] = { \
- .id = _id, \
- .iobase = soc ## _UART ## _hwid ## _BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_UART ## _hwid, \
- }
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = {
-#define imx21_imx_uart_data_entry(_id, _hwid) \
- imx_imx_uart_1irq_data_entry(MX21, _id, _hwid, SZ_4K)
- imx21_imx_uart_data_entry(0, 1),
- imx21_imx_uart_data_entry(1, 2),
- imx21_imx_uart_data_entry(2, 3),
- imx21_imx_uart_data_entry(3, 4),
-};
-#endif
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst = {
-#define imx27_imx_uart_data_entry(_id, _hwid) \
- imx_imx_uart_1irq_data_entry(MX27, _id, _hwid, SZ_4K)
- imx27_imx_uart_data_entry(0, 1),
- imx27_imx_uart_data_entry(1, 2),
- imx27_imx_uart_data_entry(2, 3),
- imx27_imx_uart_data_entry(3, 4),
- imx27_imx_uart_data_entry(4, 5),
- imx27_imx_uart_data_entry(5, 6),
-};
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst = {
-#define imx31_imx_uart_data_entry(_id, _hwid) \
- imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_4K)
- imx31_imx_uart_data_entry(0, 1),
- imx31_imx_uart_data_entry(1, 2),
- imx31_imx_uart_data_entry(2, 3),
- imx31_imx_uart_data_entry(3, 4),
- imx31_imx_uart_data_entry(4, 5),
-};
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = {
-#define imx35_imx_uart_data_entry(_id, _hwid) \
- imx_imx_uart_1irq_data_entry(MX35, _id, _hwid, SZ_16K)
- imx35_imx_uart_data_entry(0, 1),
- imx35_imx_uart_data_entry(1, 2),
- imx35_imx_uart_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_imx_uart_1irq(
- const struct imx_imx_uart_1irq_data *data,
- const struct imxuart_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- /* i.mx21 type uart runs on all i.mx except i.mx1 */
- return imx_add_platform_device("imx21-uart", data->id,
- res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-imx/devices/platform-imx2-wdt.c b/arch/arm/mach-imx/devices/platform-imx2-wdt.c
deleted file mode 100644
index fdd355ae4d5f..000000000000
--- a/arch/arm/mach-imx/devices/platform-imx2-wdt.c
+++ /dev/null
@@ -1,52 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/sizes.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_imx2_wdt_data_entry_single(soc, _id, _hwid, _size) \
- { \
- .id = _id, \
- .iobase = soc ## _WDOG ## _hwid ## _BASE_ADDR, \
- .iosize = _size, \
- }
-#define imx_imx2_wdt_data_entry(soc, _id, _hwid, _size) \
- [_id] = imx_imx2_wdt_data_entry_single(soc, _id, _hwid, _size)
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_imx2_wdt_data imx21_imx2_wdt_data __initconst =
- imx_imx2_wdt_data_entry_single(MX21, 0, , SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_imx2_wdt_data imx27_imx2_wdt_data __initconst =
- imx_imx2_wdt_data_entry_single(MX27, 0, , SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_imx2_wdt_data imx31_imx2_wdt_data __initconst =
- imx_imx2_wdt_data_entry_single(MX31, 0, , SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_imx2_wdt_data imx35_imx2_wdt_data __initconst =
- imx_imx2_wdt_data_entry_single(MX35, 0, , SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_imx2_wdt(
- const struct imx_imx2_wdt_data *data)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- },
- };
- return imx_add_platform_device("imx2-wdt", data->id,
- res, ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/arch/arm/mach-imx/devices/platform-imx21-hcd.c b/arch/arm/mach-imx/devices/platform-imx21-hcd.c
deleted file mode 100644
index f55763c36d26..000000000000
--- a/arch/arm/mach-imx/devices/platform-imx21-hcd.c
+++ /dev/null
@@ -1,38 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_imx21_hcd_data_entry_single(soc) \
- { \
- .iobase = soc ## _USBOTG_BASE_ADDR, \
- .irq = soc ## _INT_USBHOST, \
- }
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_imx21_hcd_data imx21_imx21_hcd_data __initconst =
- imx_imx21_hcd_data_entry_single(MX21);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-struct platform_device *__init imx_add_imx21_hcd(
- const struct imx_imx21_hcd_data *data,
- const struct mx21_usbh_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_8K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
- return imx_add_platform_device_dmamask("imx21-hcd", 0,
- res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-imx27-coda.c b/arch/arm/mach-imx/devices/platform-imx27-coda.c
deleted file mode 100644
index 66a116e6c6bc..000000000000
--- a/arch/arm/mach-imx/devices/platform-imx27-coda.c
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Vista Silicon
- * Javier Martin <javier.martin@vista-silicon.com>
- */
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_imx27_coda_data imx27_coda_data __initconst = {
- .iobase = MX27_VPU_BASE_ADDR,
- .iosize = SZ_512,
- .irq = MX27_INT_VPU,
-};
-#endif
-
-struct platform_device *__init imx_add_imx27_coda(
- const struct imx_imx27_coda_data *data)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
- return imx_add_platform_device_dmamask("coda-imx27", 0, res, 2, NULL,
- 0, DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-ipu-core.c b/arch/arm/mach-imx/devices/platform-ipu-core.c
deleted file mode 100644
index b4290760f49f..000000000000
--- a/arch/arm/mach-imx/devices/platform-ipu-core.c
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2011 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/dma-mapping.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_ipu_core_entry_single(soc) \
-{ \
- .iobase = soc ## _IPU_CTRL_BASE_ADDR, \
- .synirq = soc ## _INT_IPU_SYN, \
- .errirq = soc ## _INT_IPU_ERR, \
-}
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_ipu_core_data imx31_ipu_core_data __initconst =
- imx_ipu_core_entry_single(MX31);
-#endif
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_ipu_core_data imx35_ipu_core_data __initconst =
- imx_ipu_core_entry_single(MX35);
-#endif
-
-static struct platform_device *imx_ipu_coredev __initdata;
-
-struct platform_device *__init imx_add_ipu_core(
- const struct imx_ipu_core_data *data)
-{
- /* The resource order is important! */
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + 0x5f,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->iobase + 0x88,
- .end = data->iobase + 0xb3,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->synirq,
- .end = data->synirq,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->errirq,
- .end = data->errirq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return imx_ipu_coredev = imx_add_platform_device("ipu-core", -1,
- res, ARRAY_SIZE(res), NULL, 0);
-}
-
-struct platform_device *__init imx_alloc_mx3_camera(
- const struct imx_ipu_core_data *data,
- const struct mx3_camera_pdata *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase + 0x60,
- .end = data->iobase + 0x87,
- .flags = IORESOURCE_MEM,
- },
- };
- int ret = -ENOMEM;
- struct platform_device *pdev;
-
- if (IS_ERR_OR_NULL(imx_ipu_coredev))
- return ERR_PTR(-ENODEV);
-
- pdev = platform_device_alloc("mx3-camera", 0);
- if (!pdev)
- return ERR_PTR(-ENOMEM);
-
- pdev->dev.dma_mask = kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
- if (!pdev->dev.dma_mask)
- goto err;
-
- *pdev->dev.dma_mask = DMA_BIT_MASK(32);
- pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
-
- ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
- if (ret)
- goto err;
-
- if (pdata) {
- struct mx3_camera_pdata *copied_pdata;
-
- ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
- if (ret) {
-err:
- kfree(pdev->dev.dma_mask);
- platform_device_put(pdev);
- return ERR_PTR(-ENODEV);
- }
- copied_pdata = dev_get_platdata(&pdev->dev);
- copied_pdata->dma_dev = &imx_ipu_coredev->dev;
- }
-
- return pdev;
-}
-
-struct platform_device *__init imx_add_mx3_sdc_fb(
- const struct imx_ipu_core_data *data,
- struct mx3fb_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase + 0xb4,
- .end = data->iobase + 0x1bf,
- .flags = IORESOURCE_MEM,
- },
- };
-
- if (IS_ERR_OR_NULL(imx_ipu_coredev))
- return ERR_PTR(-ENODEV);
-
- pdata->dma_dev = &imx_ipu_coredev->dev;
-
- return imx_add_platform_device_dmamask("mx3_sdc_fb", -1,
- res, ARRAY_SIZE(res), pdata, sizeof(*pdata),
- DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-mx2-camera.c b/arch/arm/mach-imx/devices/platform-mx2-camera.c
deleted file mode 100644
index 5375f8b3d079..000000000000
--- a/arch/arm/mach-imx/devices/platform-mx2-camera.c
+++ /dev/null
@@ -1,59 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_mx2_camera_data_entry_single(soc, _devid) \
- { \
- .devid = _devid, \
- .iobasecsi = soc ## _CSI_BASE_ADDR, \
- .iosizecsi = SZ_4K, \
- .irqcsi = soc ## _INT_CSI, \
- }
-#define imx_mx2_camera_data_entry_single_emma(soc, _devid) \
- { \
- .devid = _devid, \
- .iobasecsi = soc ## _CSI_BASE_ADDR, \
- .iosizecsi = SZ_32, \
- .irqcsi = soc ## _INT_CSI, \
- .iobaseemmaprp = soc ## _EMMAPRP_BASE_ADDR, \
- .iosizeemmaprp = SZ_32, \
- .irqemmaprp = soc ## _INT_EMMAPRP, \
- }
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst =
- imx_mx2_camera_data_entry_single_emma(MX27, "imx27-camera");
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-struct platform_device *__init imx_add_mx2_camera(
- const struct imx_mx2_camera_data *data,
- const struct mx2_camera_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobasecsi,
- .end = data->iobasecsi + data->iosizecsi - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irqcsi,
- .end = data->irqcsi,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->iobaseemmaprp,
- .end = data->iobaseemmaprp + data->iosizeemmaprp - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irqemmaprp,
- .end = data->irqemmaprp,
- .flags = IORESOURCE_IRQ,
- },
- };
- return imx_add_platform_device_dmamask(data->devid, 0,
- res, data->iobaseemmaprp ? 4 : 2,
- pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
-
diff --git a/arch/arm/mach-imx/devices/platform-mx2-emma.c b/arch/arm/mach-imx/devices/platform-mx2-emma.c
deleted file mode 100644
index 20f28ba16f36..000000000000
--- a/arch/arm/mach-imx/devices/platform-mx2-emma.c
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_mx2_emmaprp_data_entry_single(soc) \
- { \
- .iobase = soc ## _EMMAPRP_BASE_ADDR, \
- .iosize = SZ_256, \
- .irq = soc ## _INT_EMMAPRP, \
- }
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_mx2_emma_data imx27_mx2_emmaprp_data __initconst =
- imx_mx2_emmaprp_data_entry_single(MX27);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-struct platform_device *__init imx_add_mx2_emmaprp(
- const struct imx_mx2_emma_data *data)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
- return imx_add_platform_device_dmamask("m2m-emmaprp", 0,
- res, 2, NULL, 0, DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-mxc-ehci.c b/arch/arm/mach-imx/devices/platform-mxc-ehci.c
deleted file mode 100644
index d9d7cc71633f..000000000000
--- a/arch/arm/mach-imx/devices/platform-mxc-ehci.c
+++ /dev/null
@@ -1,61 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/dma-mapping.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_mxc_ehci_data_entry_single(soc, _id, hs) \
- { \
- .id = _id, \
- .iobase = soc ## _USB_ ## hs ## _BASE_ADDR, \
- .irq = soc ## _INT_USB_ ## hs, \
- }
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data __initconst =
- imx_mxc_ehci_data_entry_single(MX27, 0, OTG);
-const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[] __initconst = {
- imx_mxc_ehci_data_entry_single(MX27, 1, HS1),
- imx_mxc_ehci_data_entry_single(MX27, 2, HS2),
-};
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data __initconst =
- imx_mxc_ehci_data_entry_single(MX31, 0, OTG);
-const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[] __initconst = {
- imx_mxc_ehci_data_entry_single(MX31, 1, HS1),
- imx_mxc_ehci_data_entry_single(MX31, 2, HS2),
-};
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data __initconst =
- imx_mxc_ehci_data_entry_single(MX35, 0, OTG);
-const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data __initconst =
- imx_mxc_ehci_data_entry_single(MX35, 1, HS);
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_mxc_ehci(
- const struct imx_mxc_ehci_data *data,
- const struct mxc_usbh_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
- return imx_add_platform_device_dmamask("mxc-ehci", data->id,
- res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-mxc-mmc.c b/arch/arm/mach-imx/devices/platform-mxc-mmc.c
deleted file mode 100644
index cd4c502bc152..000000000000
--- a/arch/arm/mach-imx/devices/platform-mxc-mmc.c
+++ /dev/null
@@ -1,72 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/dma-mapping.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_mxc_mmc_data_entry_single(soc, _devid, _id, _hwid, _size) \
- { \
- .devid = _devid, \
- .id = _id, \
- .iobase = soc ## _SDHC ## _hwid ## _BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_SDHC ## _hwid, \
- .dmareq = soc ## _DMA_REQ_SDHC ## _hwid, \
- }
-#define imx_mxc_mmc_data_entry(soc, _devid, _id, _hwid, _size) \
- [_id] = imx_mxc_mmc_data_entry_single(soc, _devid, _id, _hwid, _size)
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_mxc_mmc_data imx21_mxc_mmc_data[] __initconst = {
-#define imx21_mxc_mmc_data_entry(_id, _hwid) \
- imx_mxc_mmc_data_entry(MX21, "imx21-mmc", _id, _hwid, SZ_4K)
- imx21_mxc_mmc_data_entry(0, 1),
- imx21_mxc_mmc_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_mxc_mmc_data imx27_mxc_mmc_data[] __initconst = {
-#define imx27_mxc_mmc_data_entry(_id, _hwid) \
- imx_mxc_mmc_data_entry(MX27, "imx21-mmc", _id, _hwid, SZ_4K)
- imx27_mxc_mmc_data_entry(0, 1),
- imx27_mxc_mmc_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_mxc_mmc_data imx31_mxc_mmc_data[] __initconst = {
-#define imx31_mxc_mmc_data_entry(_id, _hwid) \
- imx_mxc_mmc_data_entry(MX31, "imx31-mmc", _id, _hwid, SZ_16K)
- imx31_mxc_mmc_data_entry(0, 1),
- imx31_mxc_mmc_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-struct platform_device *__init imx_add_mxc_mmc(
- const struct imx_mxc_mmc_data *data,
- const struct imxmmc_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->dmareq,
- .end = data->dmareq,
- .flags = IORESOURCE_DMA,
- },
- };
- return imx_add_platform_device_dmamask(data->devid, data->id,
- res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-mxc_nand.c b/arch/arm/mach-imx/devices/platform-mxc_nand.c
deleted file mode 100644
index 0f5f741f897f..000000000000
--- a/arch/arm/mach-imx/devices/platform-mxc_nand.c
+++ /dev/null
@@ -1,72 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/sizes.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_mxc_nand_data_entry_single(soc, _devid, _size) \
- { \
- .devid = _devid, \
- .iobase = soc ## _NFC_BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_NFC \
- }
-
-#define imx_mxc_nandv3_data_entry_single(soc, _devid, _size) \
- { \
- .devid = _devid, \
- .id = -1, \
- .iobase = soc ## _NFC_BASE_ADDR, \
- .iosize = _size, \
- .axibase = soc ## _NFC_AXI_BASE_ADDR, \
- .irq = soc ## _INT_NFC \
- }
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst =
- imx_mxc_nand_data_entry_single(MX21, "imx21-nand", SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst =
- imx_mxc_nand_data_entry_single(MX27, "imx27-nand", SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst =
- imx_mxc_nand_data_entry_single(MX31, "imx27-nand", SZ_4K);
-#endif
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst =
- imx_mxc_nand_data_entry_single(MX35, "imx25-nand", SZ_8K);
-#endif
-
-struct platform_device *__init imx_add_mxc_nand(
- const struct imx_mxc_nand_data *data,
- const struct mxc_nand_platform_data *pdata)
-{
- /* AXI has to come first, that's how the mxc_nand driver expect it */
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->axibase,
- .end = data->axibase + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- };
- return imx_add_platform_device(data->devid, data->id,
- res, ARRAY_SIZE(res) - !data->axibase,
- pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-imx/devices/platform-mxc_rtc.c b/arch/arm/mach-imx/devices/platform-mxc_rtc.c
deleted file mode 100644
index 0c746de1dd1d..000000000000
--- a/arch/arm/mach-imx/devices/platform-mxc_rtc.c
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010-2011 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_mxc_rtc_data_entry_single(soc, _devid) \
- { \
- .devid = _devid, \
- .iobase = soc ## _RTC_BASE_ADDR, \
- .irq = soc ## _INT_RTC, \
- }
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_mxc_rtc_data imx31_mxc_rtc_data __initconst =
- imx_mxc_rtc_data_entry_single(MX31, "imx21-rtc");
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_mxc_rtc_data imx35_mxc_rtc_data __initconst =
- imx_mxc_rtc_data_entry_single(MX35, "imx21-rtc");
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_mxc_rtc(
- const struct imx_mxc_rtc_data *data)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return imx_add_platform_device(data->devid, -1,
- res, ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/arch/arm/mach-imx/devices/platform-mxc_w1.c b/arch/arm/mach-imx/devices/platform-mxc_w1.c
deleted file mode 100644
index ab42c6b0542c..000000000000
--- a/arch/arm/mach-imx/devices/platform-mxc_w1.c
+++ /dev/null
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_mxc_w1_data_entry_single(soc) \
- { \
- .iobase = soc ## _OWIRE_BASE_ADDR, \
- }
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_mxc_w1_data imx21_mxc_w1_data __initconst =
- imx_mxc_w1_data_entry_single(MX21);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_mxc_w1_data imx27_mxc_w1_data __initconst =
- imx_mxc_w1_data_entry_single(MX27);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_mxc_w1_data imx31_mxc_w1_data __initconst =
- imx_mxc_w1_data_entry_single(MX31);
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_mxc_w1_data imx35_mxc_w1_data __initconst =
- imx_mxc_w1_data_entry_single(MX35);
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_mxc_w1(
- const struct imx_mxc_w1_data *data)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- };
-
- return imx_add_platform_device("mxc_w1", 0,
- res, ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/arch/arm/mach-imx/devices/platform-pata_imx.c b/arch/arm/mach-imx/devices/platform-pata_imx.c
deleted file mode 100644
index 0e985fffba78..000000000000
--- a/arch/arm/mach-imx/devices/platform-pata_imx.c
+++ /dev/null
@@ -1,45 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_pata_imx_data_entry_single(soc, _size) \
- { \
- .iobase = soc ## _ATA_BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_ATA, \
- }
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_pata_imx_data imx27_pata_imx_data __initconst =
- imx_pata_imx_data_entry_single(MX27, SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_pata_imx_data imx31_pata_imx_data __initconst =
- imx_pata_imx_data_entry_single(MX31, SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_pata_imx_data imx35_pata_imx_data __initconst =
- imx_pata_imx_data_entry_single(MX35, SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_pata_imx(
- const struct imx_pata_imx_data *data)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
- return imx_add_platform_device("pata_imx", -1,
- res, ARRAY_SIZE(res), NULL, 0);
-}
-
diff --git a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
deleted file mode 100644
index 40c261071144..000000000000
--- a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix, Wolfram Sang <kernel@pengutronix.de>
- */
-
-#include <linux/platform_data/mmc-esdhc-imx.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_sdhci_esdhc_imx_data_entry_single(soc, _devid, _id, hwid) \
- { \
- .devid = _devid, \
- .id = _id, \
- .iobase = soc ## _ESDHC ## hwid ## _BASE_ADDR, \
- .irq = soc ## _INT_ESDHC ## hwid, \
- }
-
-#define imx_sdhci_esdhc_imx_data_entry(soc, devid, id, hwid) \
- [id] = imx_sdhci_esdhc_imx_data_entry_single(soc, devid, id, hwid)
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_sdhci_esdhc_imx_data
-imx35_sdhci_esdhc_imx_data[] __initconst = {
-#define imx35_sdhci_esdhc_imx_data_entry(_id, _hwid) \
- imx_sdhci_esdhc_imx_data_entry(MX35, "sdhci-esdhc-imx35", _id, _hwid)
- imx35_sdhci_esdhc_imx_data_entry(0, 1),
- imx35_sdhci_esdhc_imx_data_entry(1, 2),
- imx35_sdhci_esdhc_imx_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-static const struct esdhc_platform_data default_esdhc_pdata __initconst = {
- .wp_type = ESDHC_WP_NONE,
- .cd_type = ESDHC_CD_NONE,
-};
-
-struct platform_device *__init imx_add_sdhci_esdhc_imx(
- const struct imx_sdhci_esdhc_imx_data *data,
- const struct esdhc_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- /*
- * If machine does not provide pdata, use the default one
- * which means no WP/CD support
- */
- if (!pdata)
- pdata = &default_esdhc_pdata;
-
- return imx_add_platform_device_dmamask(data->devid, data->id, res,
- ARRAY_SIZE(res), pdata, sizeof(*pdata),
- DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-spi_imx.c b/arch/arm/mach-imx/devices/platform-spi_imx.c
deleted file mode 100644
index 27747bf628a3..000000000000
--- a/arch/arm/mach-imx/devices/platform-spi_imx.c
+++ /dev/null
@@ -1,78 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/gpio/machine.h>
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_spi_imx_data_entry_single(soc, type, _devid, _id, hwid, _size) \
- { \
- .devid = _devid, \
- .id = _id, \
- .iobase = soc ## _ ## type ## hwid ## _BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_ ## type ## hwid, \
- }
-
-#define imx_spi_imx_data_entry(soc, type, devid, id, hwid, size) \
- [id] = imx_spi_imx_data_entry_single(soc, type, devid, id, hwid, size)
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_spi_imx_data imx21_cspi_data[] __initconst = {
-#define imx21_cspi_data_entry(_id, _hwid) \
- imx_spi_imx_data_entry(MX21, CSPI, "imx21-cspi", _id, _hwid, SZ_4K)
- imx21_cspi_data_entry(0, 1),
- imx21_cspi_data_entry(1, 2),
-};
-#endif
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_spi_imx_data imx27_cspi_data[] __initconst = {
-#define imx27_cspi_data_entry(_id, _hwid) \
- imx_spi_imx_data_entry(MX27, CSPI, "imx27-cspi", _id, _hwid, SZ_4K)
- imx27_cspi_data_entry(0, 1),
- imx27_cspi_data_entry(1, 2),
- imx27_cspi_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_spi_imx_data imx31_cspi_data[] __initconst = {
-#define imx31_cspi_data_entry(_id, _hwid) \
- imx_spi_imx_data_entry(MX31, CSPI, "imx31-cspi", _id, _hwid, SZ_4K)
- imx31_cspi_data_entry(0, 1),
- imx31_cspi_data_entry(1, 2),
- imx31_cspi_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_spi_imx_data imx35_cspi_data[] __initconst = {
-#define imx35_cspi_data_entry(_id, _hwid) \
- imx_spi_imx_data_entry(MX35, CSPI, "imx35-cspi", _id, _hwid, SZ_4K)
- imx35_cspi_data_entry(0, 1),
- imx35_cspi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_spi_imx(
- const struct imx_spi_imx_data *data, struct gpiod_lookup_table *gtable)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
- if (gtable)
- gpiod_add_lookup_table(gtable);
- return imx_add_platform_device(data->devid, data->id,
- res, ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/arch/arm/mach-imx/ehci-imx27.c b/arch/arm/mach-imx/ehci-imx27.c
deleted file mode 100644
index 83962ce75983..000000000000
--- a/arch/arm/mach-imx/ehci-imx27.c
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/platform_data/usb-ehci-mxc.h>
-
-#include "ehci.h"
-#include "hardware.h"
-
-#define USBCTRL_OTGBASE_OFFSET 0x600
-
-#define MX27_OTG_SIC_SHIFT 29
-#define MX27_OTG_SIC_MASK (0x3 << MX27_OTG_SIC_SHIFT)
-#define MX27_OTG_PM_BIT (1 << 24)
-
-#define MX27_H2_SIC_SHIFT 21
-#define MX27_H2_SIC_MASK (0x3 << MX27_H2_SIC_SHIFT)
-#define MX27_H2_PM_BIT (1 << 16)
-#define MX27_H2_DT_BIT (1 << 5)
-
-#define MX27_H1_SIC_SHIFT 13
-#define MX27_H1_SIC_MASK (0x3 << MX27_H1_SIC_SHIFT)
-#define MX27_H1_PM_BIT (1 << 8)
-#define MX27_H1_DT_BIT (1 << 4)
-
-int mx27_initialize_usb_hw(int port, unsigned int flags)
-{
- unsigned int v;
-
- v = readl(MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
- switch (port) {
- case 0: /* OTG port */
- v &= ~(MX27_OTG_SIC_MASK | MX27_OTG_PM_BIT);
- v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_OTG_SIC_SHIFT;
-
- if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
- v |= MX27_OTG_PM_BIT;
- break;
- case 1: /* H1 port */
- v &= ~(MX27_H1_SIC_MASK | MX27_H1_PM_BIT | MX27_H1_DT_BIT);
- v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_H1_SIC_SHIFT;
-
- if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
- v |= MX27_H1_PM_BIT;
-
- if (!(flags & MXC_EHCI_TTL_ENABLED))
- v |= MX27_H1_DT_BIT;
-
- break;
- case 2: /* H2 port */
- v &= ~(MX27_H2_SIC_MASK | MX27_H2_PM_BIT | MX27_H2_DT_BIT);
- v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_H2_SIC_SHIFT;
-
- if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
- v |= MX27_H2_PM_BIT;
-
- if (!(flags & MXC_EHCI_TTL_ENABLED))
- v |= MX27_H2_DT_BIT;
-
- break;
- default:
- return -EINVAL;
- }
-
- writel(v, MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
- return 0;
-}
-
diff --git a/arch/arm/mach-imx/ehci-imx31.c b/arch/arm/mach-imx/ehci-imx31.c
deleted file mode 100644
index d6d794d53a63..000000000000
--- a/arch/arm/mach-imx/ehci-imx31.c
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/platform_data/usb-ehci-mxc.h>
-
-#include "ehci.h"
-#include "hardware.h"
-
-#define USBCTRL_OTGBASE_OFFSET 0x600
-
-#define MX31_OTG_SIC_SHIFT 29
-#define MX31_OTG_SIC_MASK (0x3 << MX31_OTG_SIC_SHIFT)
-#define MX31_OTG_PM_BIT (1 << 24)
-
-#define MX31_H2_SIC_SHIFT 21
-#define MX31_H2_SIC_MASK (0x3 << MX31_H2_SIC_SHIFT)
-#define MX31_H2_PM_BIT (1 << 16)
-#define MX31_H2_DT_BIT (1 << 5)
-
-#define MX31_H1_SIC_SHIFT 13
-#define MX31_H1_SIC_MASK (0x3 << MX31_H1_SIC_SHIFT)
-#define MX31_H1_PM_BIT (1 << 8)
-#define MX31_H1_DT_BIT (1 << 4)
-
-int mx31_initialize_usb_hw(int port, unsigned int flags)
-{
- unsigned int v;
-
- v = readl(MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
- switch (port) {
- case 0: /* OTG port */
- v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
- v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_OTG_SIC_SHIFT;
-
- if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
- v |= MX31_OTG_PM_BIT;
-
- break;
- case 1: /* H1 port */
- v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
- v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H1_SIC_SHIFT;
-
- if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
- v |= MX31_H1_PM_BIT;
-
- if (!(flags & MXC_EHCI_TTL_ENABLED))
- v |= MX31_H1_DT_BIT;
-
- break;
- case 2: /* H2 port */
- v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
- v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H2_SIC_SHIFT;
-
- if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
- v |= MX31_H2_PM_BIT;
-
- if (!(flags & MXC_EHCI_TTL_ENABLED))
- v |= MX31_H2_DT_BIT;
-
- break;
- default:
- return -EINVAL;
- }
-
- writel(v, MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
- return 0;
-}
diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c
deleted file mode 100644
index e6ba965c5c5b..000000000000
--- a/arch/arm/mach-imx/ehci-imx35.c
+++ /dev/null
@@ -1,89 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/platform_data/usb-ehci-mxc.h>
-
-#include "ehci.h"
-#include "hardware.h"
-
-#define USBCTRL_OTGBASE_OFFSET 0x600
-
-#define MX35_OTG_SIC_SHIFT 29
-#define MX35_OTG_SIC_MASK (0x3 << MX35_OTG_SIC_SHIFT)
-#define MX35_OTG_PM_BIT (1 << 24)
-#define MX35_OTG_PP_BIT (1 << 11)
-#define MX35_OTG_OCPOL_BIT (1 << 3)
-
-#define MX35_H1_SIC_SHIFT 21
-#define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT)
-#define MX35_H1_PP_BIT (1 << 18)
-#define MX35_H1_PM_BIT (1 << 16)
-#define MX35_H1_IPPUE_UP_BIT (1 << 7)
-#define MX35_H1_IPPUE_DOWN_BIT (1 << 6)
-#define MX35_H1_TLL_BIT (1 << 5)
-#define MX35_H1_USBTE_BIT (1 << 4)
-#define MX35_H1_OCPOL_BIT (1 << 2)
-
-int mx35_initialize_usb_hw(int port, unsigned int flags)
-{
- unsigned int v;
-
- v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
- switch (port) {
- case 0: /* OTG port */
- v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT | MX35_OTG_PP_BIT |
- MX35_OTG_OCPOL_BIT);
- v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT;
-
- if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
- v |= MX35_OTG_PM_BIT;
-
- if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
- v |= MX35_OTG_PP_BIT;
-
- if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
- v |= MX35_OTG_OCPOL_BIT;
-
- break;
- case 1: /* H1 port */
- v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_PP_BIT |
- MX35_H1_OCPOL_BIT | MX35_H1_TLL_BIT | MX35_H1_USBTE_BIT |
- MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
- v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT;
-
- if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
- v |= MX35_H1_PM_BIT;
-
- if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
- v |= MX35_H1_PP_BIT;
-
- if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
- v |= MX35_H1_OCPOL_BIT;
-
- if (!(flags & MXC_EHCI_TTL_ENABLED))
- v |= MX35_H1_TLL_BIT;
-
- if (flags & MXC_EHCI_INTERNAL_PHY)
- v |= MX35_H1_USBTE_BIT;
-
- if (flags & MXC_EHCI_IPPUE_DOWN)
- v |= MX35_H1_IPPUE_DOWN_BIT;
-
- if (flags & MXC_EHCI_IPPUE_UP)
- v |= MX35_H1_IPPUE_UP_BIT;
-
- break;
- default:
- return -EINVAL;
- }
-
- writel(v, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
- return 0;
-}
diff --git a/arch/arm/mach-imx/ehci.h b/arch/arm/mach-imx/ehci.h
deleted file mode 100644
index b7ad6175f5bf..000000000000
--- a/arch/arm/mach-imx/ehci.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_IMX_EHCI_H
-#define __MACH_IMX_EHCI_H
-
-/* values for portsc field */
-#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23)
-#define MXC_EHCI_FORCE_FS (1 << 24)
-#define MXC_EHCI_UTMI_8BIT (0 << 28)
-#define MXC_EHCI_UTMI_16BIT (1 << 28)
-#define MXC_EHCI_SERIAL (1 << 29)
-#define MXC_EHCI_MODE_UTMI (0 << 30)
-#define MXC_EHCI_MODE_PHILIPS (1 << 30)
-#define MXC_EHCI_MODE_ULPI (2 << 30)
-#define MXC_EHCI_MODE_SERIAL (3 << 30)
-
-/* values for flags field */
-#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0)
-#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0)
-#define MXC_EHCI_INTERFACE_MASK (0xf)
-
-#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5)
-#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH (1 << 6)
-#define MXC_EHCI_OC_PIN_ACTIVE_LOW (1 << 7)
-#define MXC_EHCI_TTL_ENABLED (1 << 8)
-
-#define MXC_EHCI_INTERNAL_PHY (1 << 9)
-#define MXC_EHCI_IPPUE_DOWN (1 << 10)
-#define MXC_EHCI_IPPUE_UP (1 << 11)
-#define MXC_EHCI_WAKEUP_ENABLED (1 << 12)
-#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 13)
-
-#define MXC_USBCTRL_OFFSET 0
-#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8
-#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc
-#define MXC_USBH2CTRL_OFFSET 0x14
-
-int mx25_initialize_usb_hw(int port, unsigned int flags);
-int mx31_initialize_usb_hw(int port, unsigned int flags);
-int mx35_initialize_usb_hw(int port, unsigned int flags);
-int mx27_initialize_usb_hw(int port, unsigned int flags);
-
-#endif /* __MACH_IMX_EHCI_H */
diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h
index 92c5a9c9f94b..7acf7ce467ed 100644
--- a/arch/arm/mach-imx/hardware.h
+++ b/arch/arm/mach-imx/hardware.h
@@ -97,7 +97,6 @@
#include "mx31.h"
#include "mx35.h"
#include "mx2x.h"
-#include "mx21.h"
#include "mx27.h"
#define imx_map_entry(soc, name, _type) { \
diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c
deleted file mode 100644
index 29d97bd64381..000000000000
--- a/arch/arm/mach-imx/imx27-dt.c
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix
- */
-
-#include <linux/irq.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "mx27.h"
-
-static const char * const imx27_dt_board_compat[] __initconst = {
- "fsl,imx27",
- NULL
-};
-
-DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)")
- .map_io = mx27_map_io,
- .init_early = imx27_init_early,
- .init_irq = mx27_init_irq,
- .init_late = imx27_pm_init,
- .dt_compat = imx27_dt_board_compat,
-MACHINE_END
diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c
deleted file mode 100644
index abfc306655c8..000000000000
--- a/arch/arm/mach-imx/iomux-imx31.c
+++ /dev/null
@@ -1,161 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch>
- */
-#include <linux/gpio.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-
-#include "hardware.h"
-#include "iomux-mx3.h"
-
-/*
- * IOMUX register (base) addresses
- */
-#define IOMUX_BASE MX31_IO_ADDRESS(MX31_IOMUXC_BASE_ADDR)
-#define IOMUXINT_OBS1 (IOMUX_BASE + 0x000)
-#define IOMUXINT_OBS2 (IOMUX_BASE + 0x004)
-#define IOMUXGPR (IOMUX_BASE + 0x008)
-#define IOMUXSW_MUX_CTL (IOMUX_BASE + 0x00C)
-#define IOMUXSW_PAD_CTL (IOMUX_BASE + 0x154)
-
-static DEFINE_SPINLOCK(gpio_mux_lock);
-
-#define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3)
-
-static DECLARE_BITMAP(mxc_pin_alloc_map, NB_PORTS * 32);
-/*
- * set the mode for a IOMUX pin.
- */
-void mxc_iomux_mode(unsigned int pin_mode)
-{
- u32 field;
- u32 l;
- u32 mode;
- void __iomem *reg;
-
- reg = IOMUXSW_MUX_CTL + (pin_mode & IOMUX_REG_MASK);
- field = pin_mode & 0x3;
- mode = (pin_mode & IOMUX_MODE_MASK) >> IOMUX_MODE_SHIFT;
-
- spin_lock(&gpio_mux_lock);
-
- l = imx_readl(reg);
- l &= ~(0xff << (field * 8));
- l |= mode << (field * 8);
- imx_writel(l, reg);
-
- spin_unlock(&gpio_mux_lock);
-}
-
-/*
- * This function configures the pad value for a IOMUX pin.
- */
-void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
-{
- u32 field, l;
- void __iomem *reg;
-
- pin &= IOMUX_PADNUM_MASK;
- reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4;
- field = (pin + 2) % 3;
-
- pr_debug("%s: reg offset = 0x%x, field = %d\n",
- __func__, (pin + 2) / 3, field);
-
- spin_lock(&gpio_mux_lock);
-
- l = imx_readl(reg);
- l &= ~(0x1ff << (field * 10));
- l |= config << (field * 10);
- imx_writel(l, reg);
-
- spin_unlock(&gpio_mux_lock);
-}
-
-/*
- * allocs a single pin:
- * - reserves the pin so that it is not claimed by another driver
- * - setups the iomux according to the configuration
- */
-int mxc_iomux_alloc_pin(unsigned int pin, const char *label)
-{
- unsigned pad = pin & IOMUX_PADNUM_MASK;
-
- if (pad >= (PIN_MAX + 1)) {
- printk(KERN_ERR "mxc_iomux: Attempt to request nonexistent pin %u for \"%s\"\n",
- pad, label ? label : "?");
- return -EINVAL;
- }
-
- if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
- printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
- pad, label ? label : "?");
- return -EBUSY;
- }
- mxc_iomux_mode(pin);
-
- return 0;
-}
-
-int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
- const char *label)
-{
- const unsigned int *p = pin_list;
- int i;
- int ret = -EINVAL;
-
- for (i = 0; i < count; i++) {
- ret = mxc_iomux_alloc_pin(*p, label);
- if (ret)
- goto setup_error;
- p++;
- }
- return 0;
-
-setup_error:
- mxc_iomux_release_multiple_pins(pin_list, i);
- return ret;
-}
-
-void mxc_iomux_release_pin(unsigned int pin)
-{
- unsigned pad = pin & IOMUX_PADNUM_MASK;
-
- if (pad < (PIN_MAX + 1))
- clear_bit(pad, mxc_pin_alloc_map);
-}
-
-void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count)
-{
- const unsigned int *p = pin_list;
- int i;
-
- for (i = 0; i < count; i++) {
- mxc_iomux_release_pin(*p);
- p++;
- }
-}
-
-/*
- * This function enables/disables the general purpose function for a particular
- * signal.
- */
-void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en)
-{
- u32 l;
-
- spin_lock(&gpio_mux_lock);
- l = imx_readl(IOMUXGPR);
- if (en)
- l |= gp;
- else
- l &= ~gp;
-
- imx_writel(l, IOMUXGPR);
- spin_unlock(&gpio_mux_lock);
-}
diff --git a/arch/arm/mach-imx/iomux-mx21.h b/arch/arm/mach-imx/iomux-mx21.h
deleted file mode 100644
index 6eab3478fb80..000000000000
--- a/arch/arm/mach-imx/iomux-mx21.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
- */
-#ifndef __MACH_IOMUX_MX21_H__
-#define __MACH_IOMUX_MX21_H__
-
-#include "iomux-mx2x.h"
-#include "iomux-v1.h"
-
-/* Primary GPIO pin functions */
-
-#define PB22_PF_USBH1_BYP (GPIO_PORTB | GPIO_PF | 22)
-#define PB25_PF_USBH1_ON (GPIO_PORTB | GPIO_PF | 25)
-#define PC5_PF_USBOTG_SDA (GPIO_PORTC | GPIO_PF | 5)
-#define PC6_PF_USBOTG_SCL (GPIO_PORTC | GPIO_PF | 6)
-#define PC7_PF_USBOTG_ON (GPIO_PORTC | GPIO_PF | 7)
-#define PC8_PF_USBOTG_FS (GPIO_PORTC | GPIO_PF | 8)
-#define PC9_PF_USBOTG_OE (GPIO_PORTC | GPIO_PF | 9)
-#define PC10_PF_USBOTG_TXDM (GPIO_PORTC | GPIO_PF | 10)
-#define PC11_PF_USBOTG_TXDP (GPIO_PORTC | GPIO_PF | 11)
-#define PC12_PF_USBOTG_RXDM (GPIO_PORTC | GPIO_PF | 12)
-#define PC13_PF_USBOTG_RXDP (GPIO_PORTC | GPIO_PF | 13)
-#define PC16_PF_SAP_FS (GPIO_PORTC | GPIO_PF | 16)
-#define PC17_PF_SAP_RXD (GPIO_PORTC | GPIO_PF | 17)
-#define PC18_PF_SAP_TXD (GPIO_PORTC | GPIO_PF | 18)
-#define PC19_PF_SAP_CLK (GPIO_PORTC | GPIO_PF | 19)
-#define PE0_PF_TEST_WB2 (GPIO_PORTE | GPIO_PF | 0)
-#define PE1_PF_TEST_WB1 (GPIO_PORTE | GPIO_PF | 1)
-#define PE2_PF_TEST_WB0 (GPIO_PORTE | GPIO_PF | 2)
-#define PF1_PF_NFCE (GPIO_PORTF | GPIO_PF | 1)
-#define PF3_PF_NFCLE (GPIO_PORTF | GPIO_PF | 3)
-#define PF7_PF_NFIO0 (GPIO_PORTF | GPIO_PF | 7)
-#define PF8_PF_NFIO1 (GPIO_PORTF | GPIO_PF | 8)
-#define PF9_PF_NFIO2 (GPIO_PORTF | GPIO_PF | 9)
-#define PF10_PF_NFIO3 (GPIO_PORTF | GPIO_PF | 10)
-#define PF11_PF_NFIO4 (GPIO_PORTF | GPIO_PF | 11)
-#define PF12_PF_NFIO5 (GPIO_PORTF | GPIO_PF | 12)
-#define PF13_PF_NFIO6 (GPIO_PORTF | GPIO_PF | 13)
-#define PF14_PF_NFIO7 (GPIO_PORTF | GPIO_PF | 14)
-#define PF16_PF_RES (GPIO_PORTF | GPIO_PF | 16)
-
-/* Alternate GPIO pin functions */
-
-#define PA5_AF_BMI_CLK_CS (GPIO_PORTA | GPIO_AF | 5)
-#define PA6_AF_BMI_D0 (GPIO_PORTA | GPIO_AF | 6)
-#define PA7_AF_BMI_D1 (GPIO_PORTA | GPIO_AF | 7)
-#define PA8_AF_BMI_D2 (GPIO_PORTA | GPIO_AF | 8)
-#define PA9_AF_BMI_D3 (GPIO_PORTA | GPIO_AF | 9)
-#define PA10_AF_BMI_D4 (GPIO_PORTA | GPIO_AF | 10)
-#define PA11_AF_BMI_D5 (GPIO_PORTA | GPIO_AF | 11)
-#define PA12_AF_BMI_D6 (GPIO_PORTA | GPIO_AF | 12)
-#define PA13_AF_BMI_D7 (GPIO_PORTA | GPIO_AF | 13)
-#define PA14_AF_BMI_D8 (GPIO_PORTA | GPIO_AF | 14)
-#define PA15_AF_BMI_D9 (GPIO_PORTA | GPIO_AF | 15)
-#define PA16_AF_BMI_D10 (GPIO_PORTA | GPIO_AF | 16)
-#define PA17_AF_BMI_D11 (GPIO_PORTA | GPIO_AF | 17)
-#define PA18_AF_BMI_D12 (GPIO_PORTA | GPIO_AF | 18)
-#define PA19_AF_BMI_D13 (GPIO_PORTA | GPIO_AF | 19)
-#define PA20_AF_BMI_D14 (GPIO_PORTA | GPIO_AF | 20)
-#define PA21_AF_BMI_D15 (GPIO_PORTA | GPIO_AF | 21)
-#define PA22_AF_BMI_READ_REQ (GPIO_PORTA | GPIO_AF | 22)
-#define PA23_AF_BMI_WRITE (GPIO_PORTA | GPIO_AF | 23)
-#define PA29_AF_BMI_RX_FULL (GPIO_PORTA | GPIO_AF | 29)
-#define PA30_AF_BMI_READ (GPIO_PORTA | GPIO_AF | 30)
-
-/* AIN GPIO pin functions */
-
-#define PC14_AIN_SYS_CLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
-#define PD21_AIN_USBH2_FS (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 21)
-#define PD22_AIN_USBH2_OE (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 22)
-#define PD23_AIN_USBH2_TXDM (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 23)
-#define PD24_AIN_USBH2_TXDP (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 24)
-#define PE8_AIN_IR_TXD (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 8)
-#define PF0_AIN_PC_RST (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 0)
-#define PF1_AIN_PC_CE1 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 1)
-#define PF2_AIN_PC_CE2 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 2)
-#define PF3_AIN_PC_POE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 3)
-#define PF4_AIN_PC_OE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 4)
-#define PF5_AIN_PC_RW (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 5)
-
-/* BIN GPIO pin functions */
-
-#define PC14_BIN_SYS_CLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
-#define PD27_BIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_BIN | GPIO_OUT | 27)
-
-/* CIN GPIO pin functions */
-
-#define PB26_CIN_USBH1_RXDAT (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 26)
-
-/* AOUT GPIO pin functions */
-
-#define PA29_AOUT_BMI_WAIT (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 29)
-#define PD19_AOUT_USBH2_RXDM (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 19)
-#define PD20_AOUT_USBH2_RXDP (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 20)
-#define PD25_AOUT_EXT_DMAREQ (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 25)
-#define PD26_AOUT_USBOTG_RXDAT (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 26)
-#define PE9_AOUT_IR_RXD (GPIO_PORTE | GPIO_AOUT | GPIO_IN | 9)
-#define PF6_AOUT_PC_BVD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 6)
-#define PF7_AOUT_PC_BVD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 7)
-#define PF8_AOUT_PC_VS2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 8)
-#define PF9_AOUT_PC_VS1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 9)
-#define PF10_AOUT_PC_WP (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 10)
-#define PF11_AOUT_PC_READY (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 11)
-#define PF12_AOUT_PC_WAIT (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 12)
-#define PF13_AOUT_PC_CD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 13)
-#define PF14_AOUT_PC_CD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 14)
-
-#endif /* ifndef __MACH_IOMUX_MX21_H__ */
diff --git a/arch/arm/mach-imx/iomux-mx27.h b/arch/arm/mach-imx/iomux-mx27.h
deleted file mode 100644
index 4d848d1ef1e3..000000000000
--- a/arch/arm/mach-imx/iomux-mx27.h
+++ /dev/null
@@ -1,192 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
- */
-#ifndef __MACH_IOMUX_MX27_H__
-#define __MACH_IOMUX_MX27_H__
-
-#include "iomux-mx2x.h"
-#include "iomux-v1.h"
-
-/* Primary GPIO pin functions */
-
-#define PA0_PF_USBH2_CLK (GPIO_PORTA | GPIO_PF | 0)
-#define PA1_PF_USBH2_DIR (GPIO_PORTA | GPIO_PF | 1)
-#define PA2_PF_USBH2_DATA7 (GPIO_PORTA | GPIO_PF | 2)
-#define PA3_PF_USBH2_NXT (GPIO_PORTA | GPIO_PF | 3)
-#define PA4_PF_USBH2_STP (GPIO_PORTA | GPIO_PF | 4)
-#define PB22_PF_USBH1_SUSP (GPIO_PORTB | GPIO_PF | 22)
-#define PB25_PF_USBH1_RCV (GPIO_PORTB | GPIO_PF | 25)
-#define PC5_PF_I2C2_SDA (GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
-#define PC6_PF_I2C2_SCL (GPIO_PORTC | GPIO_PF | GPIO_IN | 6)
-#define PC7_PF_USBOTG_DATA5 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 7)
-#define PC8_PF_USBOTG_DATA6 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 8)
-#define PC9_PF_USBOTG_DATA0 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
-#define PC10_PF_USBOTG_DATA2 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 10)
-#define PC11_PF_USBOTG_DATA1 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
-#define PC12_PF_USBOTG_DATA4 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 12)
-#define PC13_PF_USBOTG_DATA3 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 13)
-#define PC16_PF_SSI4_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 16)
-#define PC17_PF_SSI4_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 17)
-#define PC18_PF_SSI4_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 18)
-#define PC19_PF_SSI4_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 19)
-#define PD0_PF_SD3_CMD (GPIO_PORTD | GPIO_PF | 0)
-#define PD1_PF_SD3_CLK (GPIO_PORTD | GPIO_PF | 1)
-#define PD2_PF_ATA_DATA0 (GPIO_PORTD | GPIO_PF | 2)
-#define PD3_PF_ATA_DATA1 (GPIO_PORTD | GPIO_PF | 3)
-#define PD4_PF_ATA_DATA2 (GPIO_PORTD | GPIO_PF | 4)
-#define PD5_PF_ATA_DATA3 (GPIO_PORTD | GPIO_PF | 5)
-#define PD6_PF_ATA_DATA4 (GPIO_PORTD | GPIO_PF | 6)
-#define PD7_PF_ATA_DATA5 (GPIO_PORTD | GPIO_PF | 7)
-#define PD8_PF_ATA_DATA6 (GPIO_PORTD | GPIO_PF | 8)
-#define PD9_PF_ATA_DATA7 (GPIO_PORTD | GPIO_PF | 9)
-#define PD10_PF_ATA_DATA8 (GPIO_PORTD | GPIO_PF | 10)
-#define PD11_PF_ATA_DATA9 (GPIO_PORTD | GPIO_PF | 11)
-#define PD12_PF_ATA_DATA10 (GPIO_PORTD | GPIO_PF | 12)
-#define PD13_PF_ATA_DATA11 (GPIO_PORTD | GPIO_PF | 13)
-#define PD14_PF_ATA_DATA12 (GPIO_PORTD | GPIO_PF | 14)
-#define PD15_PF_ATA_DATA13 (GPIO_PORTD | GPIO_PF | 15)
-#define PD16_PF_ATA_DATA14 (GPIO_PORTD | GPIO_PF | 16)
-#define PE0_PF_USBOTG_NXT (GPIO_PORTE | GPIO_PF | GPIO_OUT | 0)
-#define PE1_PF_USBOTG_STP (GPIO_PORTE | GPIO_PF | GPIO_OUT | 1)
-#define PE2_PF_USBOTG_DIR (GPIO_PORTE | GPIO_PF | GPIO_OUT | 2)
-#define PE24_PF_USBOTG_CLK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 24)
-#define PE25_PF_USBOTG_DATA7 (GPIO_PORTE | GPIO_PF | GPIO_OUT | 25)
-#define PF1_PF_NFCLE (GPIO_PORTF | GPIO_PF | 1)
-#define PF3_PF_NFCE (GPIO_PORTF | GPIO_PF | 3)
-#define PF7_PF_PC_POE (GPIO_PORTF | GPIO_PF | 7)
-#define PF8_PF_PC_RW (GPIO_PORTF | GPIO_PF | 8)
-#define PF9_PF_PC_IOIS16 (GPIO_PORTF | GPIO_PF | 9)
-#define PF10_PF_PC_RST (GPIO_PORTF | GPIO_PF | 10)
-#define PF11_PF_PC_BVD2 (GPIO_PORTF | GPIO_PF | 11)
-#define PF12_PF_PC_BVD1 (GPIO_PORTF | GPIO_PF | 12)
-#define PF13_PF_PC_VS2 (GPIO_PORTF | GPIO_PF | 13)
-#define PF14_PF_PC_VS1 (GPIO_PORTF | GPIO_PF | 14)
-#define PF16_PF_PC_PWRON (GPIO_PORTF | GPIO_PF | 16)
-#define PF17_PF_PC_READY (GPIO_PORTF | GPIO_PF | 17)
-#define PF18_PF_PC_WAIT (GPIO_PORTF | GPIO_PF | 18)
-#define PF19_PF_PC_CD2 (GPIO_PORTF | GPIO_PF | 19)
-#define PF20_PF_PC_CD1 (GPIO_PORTF | GPIO_PF | 20)
-#define PF23_PF_ATA_DATA15 (GPIO_PORTF | GPIO_PF | 23)
-
-/* Alternate GPIO pin functions */
-
-#define PB4_AF_MSHC_DATA0 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 4)
-#define PB5_AF_MSHC_DATA1 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 5)
-#define PB6_AF_MSHC_DATA2 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 6)
-#define PB7_AF_MSHC_DATA4 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 7)
-#define PB8_AF_MSHC_BS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 8)
-#define PB9_AF_MSHC_SCLK (GPIO_PORTB | GPIO_AF | GPIO_OUT | 9)
-#define PB10_AF_UART6_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 10)
-#define PB11_AF_UART6_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 11)
-#define PB12_AF_UART6_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 12)
-#define PB13_AF_UART6_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 13)
-#define PB18_AF_UART5_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 18)
-#define PB19_AF_UART5_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 19)
-#define PB20_AF_UART5_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 20)
-#define PB21_AF_UART5_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 21)
-#define PC8_AF_FEC_MDIO (GPIO_PORTC | GPIO_AF | GPIO_IN | 8)
-#define PC24_AF_GPT5_TOUT (GPIO_PORTC | GPIO_AF | 24)
-#define PC25_AF_GPT5_TIN (GPIO_PORTC | GPIO_AF | 25)
-#define PC26_AF_GPT4_TOUT (GPIO_PORTC | GPIO_AF | 26)
-#define PC27_AF_GPT4_TIN (GPIO_PORTC | GPIO_AF | 27)
-#define PD1_AF_ETMTRACE_PKT15 (GPIO_PORTD | GPIO_AF | 1)
-#define PD6_AF_ETMTRACE_PKT14 (GPIO_PORTD | GPIO_AF | 6)
-#define PD7_AF_ETMTRACE_PKT13 (GPIO_PORTD | GPIO_AF | 7)
-#define PD9_AF_ETMTRACE_PKT12 (GPIO_PORTD | GPIO_AF | 9)
-#define PD2_AF_SD3_D0 (GPIO_PORTD | GPIO_AF | 2)
-#define PD3_AF_SD3_D1 (GPIO_PORTD | GPIO_AF | 3)
-#define PD4_AF_SD3_D2 (GPIO_PORTD | GPIO_AF | 4)
-#define PD5_AF_SD3_D3 (GPIO_PORTD | GPIO_AF | 5)
-#define PD8_AF_FEC_MDIO (GPIO_PORTD | GPIO_AF | GPIO_IN | 8)
-#define PD10_AF_ETMTRACE_PKT11 (GPIO_PORTD | GPIO_AF | 10)
-#define PD11_AF_ETMTRACE_PKT10 (GPIO_PORTD | GPIO_AF | 11)
-#define PD12_AF_ETMTRACE_PKT9 (GPIO_PORTD | GPIO_AF | 12)
-#define PD13_AF_ETMTRACE_PKT8 (GPIO_PORTD | GPIO_AF | 13)
-#define PD14_AF_ETMTRACE_PKT7 (GPIO_PORTD | GPIO_AF | 14)
-#define PD15_AF_ETMTRACE_PKT6 (GPIO_PORTD | GPIO_AF | 15)
-#define PD16_AF_ETMTRACE_PKT5 (GPIO_PORTD | GPIO_AF | 16)
-#define PF1_AF_ETMTRACE_PKT0 (GPIO_PORTF | GPIO_AF | 1)
-#define PF3_AF_ETMTRACE_PKT2 (GPIO_PORTF | GPIO_AF | 3)
-#define PF5_AF_ETMPIPESTAT11 (GPIO_PORTF | GPIO_AF | 5)
-#define PF7_AF_ATA_BUFFER_EN (GPIO_PORTF | GPIO_AF | 7)
-#define PF8_AF_ATA_IORDY (GPIO_PORTF | GPIO_AF | 8)
-#define PF9_AF_ATA_INTRQ (GPIO_PORTF | GPIO_AF | 9)
-#define PF10_AF_ATA_RESET (GPIO_PORTF | GPIO_AF | 10)
-#define PF11_AF_ATA_DMACK (GPIO_PORTF | GPIO_AF | 11)
-#define PF12_AF_ATA_DMAREQ (GPIO_PORTF | GPIO_AF | 12)
-#define PF13_AF_ATA_DA0 (GPIO_PORTF | GPIO_AF | 13)
-#define PF14_AF_ATA_DA1 (GPIO_PORTF | GPIO_AF | 14)
-#define PF15_AF_ETMTRACE_SYNC (GPIO_PORTF | GPIO_AF | 15)
-#define PF16_AF_ATA_DA2 (GPIO_PORTF | GPIO_AF | 16)
-#define PF17_AF_ATA_CS0 (GPIO_PORTF | GPIO_AF | 17)
-#define PF18_AF_ATA_CS1 (GPIO_PORTF | GPIO_AF | 18)
-#define PF19_AF_ATA_DIOW (GPIO_PORTF | GPIO_AF | 19)
-#define PF20_AF_ATA_DIOR (GPIO_PORTF | GPIO_AF | 20)
-#define PF22_AF_ETMTRACE_CLK (GPIO_PORTF | GPIO_AF | 22)
-#define PF23_AF_ETMTRACE_PKT4 (GPIO_PORTF | GPIO_AF | 23)
-
-/* AIN GPIO pin functions */
-
-#define PC14_AIN_SSI1_MCLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
-#define PC15_AIN_GPT6_TOUT (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 15)
-#define PD0_AIN_FEC_TXD0 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 0)
-#define PD1_AIN_FEC_TXD1 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 1)
-#define PD2_AIN_FEC_TXD2 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 2)
-#define PD3_AIN_FEC_TXD3 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 3)
-#define PD9_AIN_FEC_MDC (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 9)
-#define PD16_AIN_FEC_TX_ER (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 16)
-#define PD27_AIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 27)
-#define PF23_AIN_FEC_TX_EN (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 23)
-
-/* BIN GPIO pin functions */
-
-#define PC14_BIN_SSI2_MCLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
-
-/* CIN GPIO pin functions */
-
-#define PD2_CIN_SLCDC1_DAT0 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 2)
-#define PD3_CIN_SLCDC1_DAT1 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 3)
-#define PD4_CIN_SLCDC1_DAT2 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 4)
-#define PD5_CIN_SLCDC1_DAT3 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 5)
-#define PD6_CIN_SLCDC1_DAT4 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 6)
-#define PD7_CIN_SLCDC1_DAT5 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 7)
-#define PD8_CIN_SLCDC1_DAT6 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 8)
-#define PD9_CIN_SLCDC1_DAT7 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 9)
-#define PD10_CIN_SLCDC1_DAT8 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 10)
-#define PD11_CIN_SLCDC1_DAT9 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 11)
-#define PD12_CIN_SLCDC1_DAT10 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 12)
-#define PD13_CIN_SLCDC1_DAT11 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 13)
-#define PD14_CIN_SLCDC1_DAT12 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 14)
-#define PD15_CIN_SLCDC1_DAT13 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 15)
-#define PD16_CIN_SLCDC1_DAT14 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 16)
-#define PD23_CIN_SLCDC1_DAT15 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 23)
-#define PF27_CIN_EXT_DMA_GRANT (GPIO_PORTF | GPIO_CIN | GPIO_OUT | 27)
-/* LCDC_TESTx on PBxx omitted, because it's not clear what they do */
-
-/* AOUT GPIO pin functions */
-
-#define PC14_AOUT_GPT6_TIN (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 14)
-#define PD4_AOUT_FEC_RX_ER (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 4)
-#define PD5_AOUT_FEC_RXD1 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 5)
-#define PD6_AOUT_FEC_RXD2 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 6)
-#define PD7_AOUT_FEC_RXD3 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 7)
-#define PD10_AOUT_FEC_CRS (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 10)
-#define PD11_AOUT_FEC_TX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 11)
-#define PD12_AOUT_FEC_RXD0 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 12)
-#define PD13_AOUT_FEC_RX_DV (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 13)
-#define PD14_AOUT_FEC_RX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 14)
-#define PD15_AOUT_FEC_COL (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 15)
-
-/* BOUT GPIO pin functions */
-
-#define PC17_BOUT_PC_IOIS16 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 17)
-#define PC18_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 18)
-#define PC19_BOUT_PC_BVD1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 19)
-#define PC28_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 28)
-#define PC29_BOUT_PC_VS1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 29)
-#define PC30_BOUT_PC_READY (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 30)
-#define PC31_BOUT_PC_WAIT (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 31)
-
-#endif /* __MACH_IOMUX_MX27_H__ */
diff --git a/arch/arm/mach-imx/iomux-mx2x.h b/arch/arm/mach-imx/iomux-mx2x.h
deleted file mode 100644
index ce6b6d20a4f0..000000000000
--- a/arch/arm/mach-imx/iomux-mx2x.h
+++ /dev/null
@@ -1,217 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
- */
-#ifndef __MACH_IOMUX_MX2x_H__
-#define __MACH_IOMUX_MX2x_H__
-
-/* Primary GPIO pin functions */
-
-#define PA5_PF_LSCLK (GPIO_PORTA | GPIO_PF | GPIO_OUT | 5)
-#define PA6_PF_LD0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 6)
-#define PA7_PF_LD1 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 7)
-#define PA8_PF_LD2 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 8)
-#define PA9_PF_LD3 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 9)
-#define PA10_PF_LD4 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 10)
-#define PA11_PF_LD5 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 11)
-#define PA12_PF_LD6 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 12)
-#define PA13_PF_LD7 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 13)
-#define PA14_PF_LD8 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 14)
-#define PA15_PF_LD9 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
-#define PA16_PF_LD10 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
-#define PA17_PF_LD11 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 17)
-#define PA18_PF_LD12 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 18)
-#define PA19_PF_LD13 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 19)
-#define PA20_PF_LD14 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 20)
-#define PA21_PF_LD15 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 21)
-#define PA22_PF_LD16 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 22)
-#define PA23_PF_LD17 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 23)
-#define PA24_PF_REV (GPIO_PORTA | GPIO_PF | GPIO_OUT | 24)
-#define PA25_PF_CLS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 25)
-#define PA26_PF_PS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 26)
-#define PA27_PF_SPL_SPR (GPIO_PORTA | GPIO_PF | GPIO_OUT | 27)
-#define PA28_PF_HSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 28)
-#define PA29_PF_VSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 29)
-#define PA30_PF_CONTRAST (GPIO_PORTA | GPIO_PF | GPIO_OUT | 30)
-#define PA31_PF_OE_ACD (GPIO_PORTA | GPIO_PF | GPIO_OUT | 31)
-#define PB4_PF_SD2_D0 (GPIO_PORTB | GPIO_PF | 4)
-#define PB5_PF_SD2_D1 (GPIO_PORTB | GPIO_PF | 5)
-#define PB6_PF_SD2_D2 (GPIO_PORTB | GPIO_PF | 6)
-#define PB7_PF_SD2_D3 (GPIO_PORTB | GPIO_PF | 7)
-#define PB8_PF_SD2_CMD (GPIO_PORTB | GPIO_PF | 8)
-#define PB9_PF_SD2_CLK (GPIO_PORTB | GPIO_PF | 9)
-#define PB10_PF_CSI_D0 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 10)
-#define PB11_PF_CSI_D1 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 11)
-#define PB12_PF_CSI_D2 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 12)
-#define PB13_PF_CSI_D3 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 13)
-#define PB14_PF_CSI_D4 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 14)
-#define PB15_PF_CSI_MCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 15)
-#define PB16_PF_CSI_PIXCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 16)
-#define PB17_PF_CSI_D5 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 17)
-#define PB18_PF_CSI_D6 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 18)
-#define PB19_PF_CSI_D7 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 19)
-#define PB20_PF_CSI_VSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 20)
-#define PB21_PF_CSI_HSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 21)
-#define PB23_PF_USB_PWR (GPIO_PORTB | GPIO_PF | 23)
-#define PB24_PF_USB_OC (GPIO_PORTB | GPIO_PF | 24)
-#define PB26_PF_USBH1_FS (GPIO_PORTB | GPIO_PF | 26)
-#define PB27_PF_USBH1_OE (GPIO_PORTB | GPIO_PF | 27)
-#define PB28_PF_USBH1_TXDM (GPIO_PORTB | GPIO_PF | 28)
-#define PB29_PF_USBH1_TXDP (GPIO_PORTB | GPIO_PF | 29)
-#define PB30_PF_USBH1_RXDM (GPIO_PORTB | GPIO_PF | 30)
-#define PB31_PF_USBH1_RXDP (GPIO_PORTB | GPIO_PF | 31)
-#define PC14_PF_TOUT (GPIO_PORTC | GPIO_PF | 14)
-#define PC15_PF_TIN (GPIO_PORTC | GPIO_PF | 15)
-#define PC20_PF_SSI1_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 20)
-#define PC21_PF_SSI1_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 21)
-#define PC22_PF_SSI1_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 22)
-#define PC23_PF_SSI1_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 23)
-#define PC24_PF_SSI2_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 24)
-#define PC25_PF_SSI2_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 25)
-#define PC26_PF_SSI2_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 26)
-#define PC27_PF_SSI2_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 27)
-#define PC28_PF_SSI3_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 28)
-#define PC29_PF_SSI3_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 29)
-#define PC30_PF_SSI3_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 30)
-#define PC31_PF_SSI3_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 31)
-#define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
-#define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
-#define PD19_PF_CSPI2_SS2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 19)
-#define PD20_PF_CSPI2_SS1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 20)
-#define PD21_PF_CSPI2_SS0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 21)
-#define PD22_PF_CSPI2_SCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 22)
-#define PD23_PF_CSPI2_MISO (GPIO_PORTD | GPIO_PF | GPIO_IN | 23)
-#define PD24_PF_CSPI2_MOSI (GPIO_PORTD | GPIO_PF | GPIO_OUT | 24)
-#define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
-#define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
-#define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
-#define PD28_PF_CSPI1_SS0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
-#define PD29_PF_CSPI1_SCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
-#define PD30_PF_CSPI1_MISO (GPIO_PORTD | GPIO_PF | GPIO_IN | 30)
-#define PD31_PF_CSPI1_MOSI (GPIO_PORTD | GPIO_PF | GPIO_OUT | 31)
-#define PE3_PF_UART2_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 3)
-#define PE4_PF_UART2_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 4)
-#define PE5_PF_PWMO (GPIO_PORTE | GPIO_PF | 5)
-#define PE6_PF_UART2_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 6)
-#define PE7_PF_UART2_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 7)
-#define PE8_PF_UART3_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 8)
-#define PE9_PF_UART3_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 9)
-#define PE10_PF_UART3_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 10)
-#define PE11_PF_UART3_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 11)
-#define PE12_PF_UART1_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 12)
-#define PE13_PF_UART1_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 13)
-#define PE14_PF_UART1_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 14)
-#define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 15)
-#define PE16_PF_RTCK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 16)
-#define PE17_PF_RESET_OUT (GPIO_PORTE | GPIO_PF | 17)
-#define PE18_PF_SD1_D0 (GPIO_PORTE | GPIO_PF | 18)
-#define PE19_PF_SD1_D1 (GPIO_PORTE | GPIO_PF | 19)
-#define PE20_PF_SD1_D2 (GPIO_PORTE | GPIO_PF | 20)
-#define PE21_PF_SD1_D3 (GPIO_PORTE | GPIO_PF | 21)
-#define PE22_PF_SD1_CMD (GPIO_PORTE | GPIO_PF | 22)
-#define PE23_PF_SD1_CLK (GPIO_PORTE | GPIO_PF | 23)
-#define PF0_PF_NRFB (GPIO_PORTF | GPIO_PF | 0)
-#define PF2_PF_NFWP (GPIO_PORTF | GPIO_PF | 2)
-#define PF4_PF_NFALE (GPIO_PORTF | GPIO_PF | 4)
-#define PF5_PF_NFRE (GPIO_PORTF | GPIO_PF | 5)
-#define PF6_PF_NFWE (GPIO_PORTF | GPIO_PF | 6)
-#define PF15_PF_CLKO (GPIO_PORTF | GPIO_PF | 15)
-#define PF21_PF_CS4 (GPIO_PORTF | GPIO_PF | 21)
-#define PF22_PF_CS5 (GPIO_PORTF | GPIO_PF | 22)
-
-/* Alternate GPIO pin functions */
-
-#define PB26_AF_UART4_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 26)
-#define PB28_AF_UART4_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 28)
-#define PB29_AF_UART4_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 29)
-#define PB31_AF_UART4_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 31)
-#define PC28_AF_SLCDC2_D0 (GPIO_PORTC | GPIO_AF | 28)
-#define PC29_AF_SLCDC2_RS (GPIO_PORTC | GPIO_AF | 29)
-#define PC30_AF_SLCDC2_CS (GPIO_PORTC | GPIO_AF | 30)
-#define PC31_AF_SLCDC2_CLK (GPIO_PORTC | GPIO_AF | 31)
-#define PD19_AF_USBH2_DATA4 (GPIO_PORTD | GPIO_AF | 19)
-#define PD20_AF_USBH2_DATA3 (GPIO_PORTD | GPIO_AF | 20)
-#define PD21_AF_USBH2_DATA6 (GPIO_PORTD | GPIO_AF | 21)
-#define PD22_AF_USBH2_DATA0 (GPIO_PORTD | GPIO_AF | 22)
-#define PD23_AF_USBH2_DATA2 (GPIO_PORTD | GPIO_AF | 23)
-#define PD24_AF_USBH2_DATA1 (GPIO_PORTD | GPIO_AF | 24)
-#define PD26_AF_USBH2_DATA5 (GPIO_PORTD | GPIO_AF | 26)
-#define PE0_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 0)
-#define PE1_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 1)
-#define PE2_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 2)
-#define PE3_AF_KP_COL7 (GPIO_PORTE | GPIO_AF | 3)
-#define PE4_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 4)
-#define PE6_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 6)
-#define PE7_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 7)
-#define PE16_AF_OWIRE (GPIO_PORTE | GPIO_AF | 16)
-#define PE18_AF_CSPI3_MISO (GPIO_PORTE | GPIO_AF | GPIO_IN | 18)
-#define PE21_AF_CSPI3_SS (GPIO_PORTE | GPIO_AF | GPIO_OUT | 21)
-#define PE22_AF_CSPI3_MOSI (GPIO_PORTE | GPIO_AF | GPIO_OUT | 22)
-#define PE23_AF_CSPI3_SCLK (GPIO_PORTE | GPIO_AF | GPIO_OUT | 23)
-
-/* AIN GPIO pin functions */
-
-#define PA6_AIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 6)
-#define PA7_AIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 7)
-#define PA8_AIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 8)
-#define PA0_AIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
-#define PA11_AIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 11)
-#define PA13_AIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 13)
-#define PA15_AIN_SLCDC1_DAT9 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 15)
-#define PA17_AIN_SLCDC1_DAT11 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
-#define PA19_AIN_SLCDC1_DAT13 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 19)
-#define PA21_AIN_SLCDC1_DAT15 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 21)
-#define PA22_AIN_EXT_DMAGRANT (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 22)
-#define PA24_AIN_SLCDC1_D0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 24)
-#define PA25_AIN_SLCDC1_RS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 25)
-#define PA26_AIN_SLCDC1_CS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 26)
-#define PA27_AIN_SLCDC1_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 27)
-#define PB6_AIN_SLCDC1_D0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 6)
-#define PB7_AIN_SLCDC1_RS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 7)
-#define PB8_AIN_SLCDC1_CS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 8)
-#define PB9_AIN_SLCDC1_CLK (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 9)
-#define PB25_AIN_SLCDC1_DAT0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 25)
-#define PB26_AIN_SLCDC1_DAT1 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 26)
-#define PB27_AIN_SLCDC1_DAT2 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 27)
-#define PB28_AIN_SLCDC1_DAT3 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 28)
-#define PB29_AIN_SLCDC1_DAT4 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 29)
-#define PB30_AIN_SLCDC1_DAT5 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 30)
-#define PB31_AIN_SLCDC1_DAT6 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 31)
-#define PC5_AIN_SLCDC1_DAT7 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 5)
-#define PC6_AIN_SLCDC1_DAT8 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 6)
-#define PC7_AIN_SLCDC1_DAT9 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 7)
-#define PC8_AIN_SLCDC1_DAT10 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 8)
-#define PC9_AIN_SLCDC1_DAT11 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 9)
-#define PC10_AIN_SLCDC1_DAT12 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 10)
-#define PC11_AIN_SLCDC1_DAT13 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 11)
-#define PC12_AIN_SLCDC1_DAT14 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 12)
-#define PC13_AIN_SLCDC1_DAT15 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 13)
-#define PE5_AIN_PC_SPKOUT (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 5)
-
-/* BIN GPIO pin functions */
-
-#define PE5_BIN_TOUT2 (GPIO_PORTE | GPIO_BIN | GPIO_OUT | 5)
-
-/* CIN GPIO pin functions */
-
-#define PA14_CIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 14)
-#define PA15_CIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 15)
-#define PA16_CIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 16)
-#define PA17_CIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 17)
-#define PA18_CIN_SLCDC1_DAT4 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 18)
-#define PA19_CIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 19)
-#define PA20_CIN_SLCDC1_DAT6 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 20)
-#define PA21_CIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 21)
-#define PB30_CIN_UART4_CTS (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 30)
-#define PE5_CIN_TOUT3 (GPIO_PORTE | GPIO_CIN | GPIO_OUT | 5)
-
-/* AOUT GPIO pin functions */
-
-#define PB29_AOUT_UART4_RXD (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 29)
-#define PB31_AOUT_UART4_RTS (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 31)
-#define PC8_AOUT_USBOTG_TXR_INT (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 8)
-#define PC15_AOUT_WKGD (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 15)
-#define PF21_AOUT_DTACK (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 21)
-
-#endif /* ifndef __MACH_IOMUX_MX2x_H__ */
diff --git a/arch/arm/mach-imx/iomux-mx3.h b/arch/arm/mach-imx/iomux-mx3.h
deleted file mode 100644
index 99270a183d47..000000000000
--- a/arch/arm/mach-imx/iomux-mx3.h
+++ /dev/null
@@ -1,706 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- */
-#ifndef __MACH_IOMUX_MX3_H__
-#define __MACH_IOMUX_MX3_H__
-
-#include <linux/types.h>
-/*
- * various IOMUX output functions
- */
-
-#define IOMUX_OCONFIG_GPIO (0 << 4) /* used as GPIO */
-#define IOMUX_OCONFIG_FUNC (1 << 4) /* used as function */
-#define IOMUX_OCONFIG_ALT1 (2 << 4) /* used as alternate function 1 */
-#define IOMUX_OCONFIG_ALT2 (3 << 4) /* used as alternate function 2 */
-#define IOMUX_OCONFIG_ALT3 (4 << 4) /* used as alternate function 3 */
-#define IOMUX_OCONFIG_ALT4 (5 << 4) /* used as alternate function 4 */
-#define IOMUX_OCONFIG_ALT5 (6 << 4) /* used as alternate function 5 */
-#define IOMUX_OCONFIG_ALT6 (7 << 4) /* used as alternate function 6 */
-#define IOMUX_ICONFIG_NONE 0 /* not configured for input */
-#define IOMUX_ICONFIG_GPIO 1 /* used as GPIO */
-#define IOMUX_ICONFIG_FUNC 2 /* used as function */
-#define IOMUX_ICONFIG_ALT1 4 /* used as alternate function 1 */
-#define IOMUX_ICONFIG_ALT2 8 /* used as alternate function 2 */
-
-#define IOMUX_CONFIG_GPIO (IOMUX_OCONFIG_GPIO | IOMUX_ICONFIG_GPIO)
-#define IOMUX_CONFIG_FUNC (IOMUX_OCONFIG_FUNC | IOMUX_ICONFIG_FUNC)
-#define IOMUX_CONFIG_ALT1 (IOMUX_OCONFIG_ALT1 | IOMUX_ICONFIG_ALT1)
-#define IOMUX_CONFIG_ALT2 (IOMUX_OCONFIG_ALT2 | IOMUX_ICONFIG_ALT2)
-
-/*
- * various IOMUX pad functions
- */
-enum iomux_pad_config {
- PAD_CTL_NOLOOPBACK = 0x0 << 9,
- PAD_CTL_LOOPBACK = 0x1 << 9,
- PAD_CTL_PKE_NONE = 0x0 << 8,
- PAD_CTL_PKE_ENABLE = 0x1 << 8,
- PAD_CTL_PUE_KEEPER = 0x0 << 7,
- PAD_CTL_PUE_PUD = 0x1 << 7,
- PAD_CTL_100K_PD = 0x0 << 5,
- PAD_CTL_100K_PU = 0x1 << 5,
- PAD_CTL_47K_PU = 0x2 << 5,
- PAD_CTL_22K_PU = 0x3 << 5,
- PAD_CTL_HYS_CMOS = 0x0 << 4,
- PAD_CTL_HYS_SCHMITZ = 0x1 << 4,
- PAD_CTL_ODE_CMOS = 0x0 << 3,
- PAD_CTL_ODE_OpenDrain = 0x1 << 3,
- PAD_CTL_DRV_NORMAL = 0x0 << 1,
- PAD_CTL_DRV_HIGH = 0x1 << 1,
- PAD_CTL_DRV_MAX = 0x2 << 1,
- PAD_CTL_SRE_SLOW = 0x0 << 0,
- PAD_CTL_SRE_FAST = 0x1 << 0
-};
-
-/*
- * various IOMUX general purpose functions
- */
-enum iomux_gp_func {
- MUX_PGP_FIRI = 1 << 0,
- MUX_DDR_MODE = 1 << 1,
- MUX_PGP_CSPI_BB = 1 << 2,
- MUX_PGP_ATA_1 = 1 << 3,
- MUX_PGP_ATA_2 = 1 << 4,
- MUX_PGP_ATA_3 = 1 << 5,
- MUX_PGP_ATA_4 = 1 << 6,
- MUX_PGP_ATA_5 = 1 << 7,
- MUX_PGP_ATA_6 = 1 << 8,
- MUX_PGP_ATA_7 = 1 << 9,
- MUX_PGP_ATA_8 = 1 << 10,
- MUX_PGP_UH2 = 1 << 11,
- MUX_SDCTL_CSD0_SEL = 1 << 12,
- MUX_SDCTL_CSD1_SEL = 1 << 13,
- MUX_CSPI1_UART3 = 1 << 14,
- MUX_EXTDMAREQ2_MBX_SEL = 1 << 15,
- MUX_TAMPER_DETECT_EN = 1 << 16,
- MUX_PGP_USB_4WIRE = 1 << 17,
- MUX_PGP_USB_COMMON = 1 << 18,
- MUX_SDHC_MEMSTICK1 = 1 << 19,
- MUX_SDHC_MEMSTICK2 = 1 << 20,
- MUX_PGP_SPLL_BYP = 1 << 21,
- MUX_PGP_UPLL_BYP = 1 << 22,
- MUX_PGP_MSHC1_CLK_SEL = 1 << 23,
- MUX_PGP_MSHC2_CLK_SEL = 1 << 24,
- MUX_CSPI3_UART5_SEL = 1 << 25,
- MUX_PGP_ATA_9 = 1 << 26,
- MUX_PGP_USB_SUSPEND = 1 << 27,
- MUX_PGP_USB_OTG_LOOPBACK = 1 << 28,
- MUX_PGP_USB_HS1_LOOPBACK = 1 << 29,
- MUX_PGP_USB_HS2_LOOPBACK = 1 << 30,
- MUX_CLKO_DDR_MODE = 1 << 31,
-};
-
-/*
- * setups a single pin:
- * - reserves the pin so that it is not claimed by another driver
- * - setups the iomux according to the configuration
- * - if the pin is configured as a GPIO, we claim it through kernel gpiolib
- */
-int mxc_iomux_alloc_pin(unsigned int pin, const char *label);
-/*
- * setups multiple pins
- * convenient way to call the above function with tables
- */
-int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
- const char *label);
-
-/*
- * releases a single pin:
- * - make it available for a future use by another driver
- * - frees the GPIO if the pin was configured as GPIO
- * - DOES NOT reconfigure the IOMUX in its reset state
- */
-void mxc_iomux_release_pin(unsigned int pin);
-/*
- * releases multiple pins
- * convenvient way to call the above function with tables
- */
-void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count);
-
-/*
- * This function enables/disables the general purpose function for a particular
- * signal.
- */
-void mxc_iomux_set_gpr(enum iomux_gp_func, bool en);
-
-/*
- * This function only configures the iomux hardware.
- * It is called by the setup functions and should not be called directly anymore.
- * It is here visible for backward compatibility
- */
-void mxc_iomux_mode(unsigned int pin_mode);
-
-#define IOMUX_PADNUM_MASK 0x1ff
-#define IOMUX_GPIONUM_SHIFT 9
-#define IOMUX_GPIONUM_MASK (0xff << IOMUX_GPIONUM_SHIFT)
-#define IOMUX_MODE_SHIFT 17
-#define IOMUX_MODE_MASK (0xff << IOMUX_MODE_SHIFT)
-
-#define IOMUX_PIN(gpionum, padnum) \
- (((gpionum << IOMUX_GPIONUM_SHIFT) & IOMUX_GPIONUM_MASK) | \
- (padnum & IOMUX_PADNUM_MASK))
-
-#define IOMUX_MODE(pin, mode) (pin | mode << IOMUX_MODE_SHIFT)
-
-#define IOMUX_TO_GPIO(iomux_pin) \
- ((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT)
-
-/*
- * This enumeration is constructed based on the Section
- * "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated
- * value is constructed based on the rules described above.
- */
-
-enum iomux_pins {
- MX31_PIN_TTM_PAD = IOMUX_PIN(0xff, 0),
- MX31_PIN_CSPI3_SPI_RDY = IOMUX_PIN(0xff, 1),
- MX31_PIN_CSPI3_SCLK = IOMUX_PIN(0xff, 2),
- MX31_PIN_CSPI3_MISO = IOMUX_PIN(0xff, 3),
- MX31_PIN_CSPI3_MOSI = IOMUX_PIN(0xff, 4),
- MX31_PIN_CLKSS = IOMUX_PIN(0xff, 5),
- MX31_PIN_CE_CONTROL = IOMUX_PIN(0xff, 6),
- MX31_PIN_ATA_RESET_B = IOMUX_PIN(95, 7),
- MX31_PIN_ATA_DMACK = IOMUX_PIN(94, 8),
- MX31_PIN_ATA_DIOW = IOMUX_PIN(93, 9),
- MX31_PIN_ATA_DIOR = IOMUX_PIN(92, 10),
- MX31_PIN_ATA_CS1 = IOMUX_PIN(91, 11),
- MX31_PIN_ATA_CS0 = IOMUX_PIN(90, 12),
- MX31_PIN_SD1_DATA3 = IOMUX_PIN(63, 13),
- MX31_PIN_SD1_DATA2 = IOMUX_PIN(62, 14),
- MX31_PIN_SD1_DATA1 = IOMUX_PIN(61, 15),
- MX31_PIN_SD1_DATA0 = IOMUX_PIN(60, 16),
- MX31_PIN_SD1_CLK = IOMUX_PIN(59, 17),
- MX31_PIN_SD1_CMD = IOMUX_PIN(58, 18),
- MX31_PIN_D3_SPL = IOMUX_PIN(0xff, 19),
- MX31_PIN_D3_CLS = IOMUX_PIN(0xff, 20),
- MX31_PIN_D3_REV = IOMUX_PIN(0xff, 21),
- MX31_PIN_CONTRAST = IOMUX_PIN(0xff, 22),
- MX31_PIN_VSYNC3 = IOMUX_PIN(0xff, 23),
- MX31_PIN_READ = IOMUX_PIN(0xff, 24),
- MX31_PIN_WRITE = IOMUX_PIN(0xff, 25),
- MX31_PIN_PAR_RS = IOMUX_PIN(0xff, 26),
- MX31_PIN_SER_RS = IOMUX_PIN(89, 27),
- MX31_PIN_LCS1 = IOMUX_PIN(88, 28),
- MX31_PIN_LCS0 = IOMUX_PIN(87, 29),
- MX31_PIN_SD_D_CLK = IOMUX_PIN(86, 30),
- MX31_PIN_SD_D_IO = IOMUX_PIN(85, 31),
- MX31_PIN_SD_D_I = IOMUX_PIN(84, 32),
- MX31_PIN_DRDY0 = IOMUX_PIN(0xff, 33),
- MX31_PIN_FPSHIFT = IOMUX_PIN(0xff, 34),
- MX31_PIN_HSYNC = IOMUX_PIN(0xff, 35),
- MX31_PIN_VSYNC0 = IOMUX_PIN(0xff, 36),
- MX31_PIN_LD17 = IOMUX_PIN(0xff, 37),
- MX31_PIN_LD16 = IOMUX_PIN(0xff, 38),
- MX31_PIN_LD15 = IOMUX_PIN(0xff, 39),
- MX31_PIN_LD14 = IOMUX_PIN(0xff, 40),
- MX31_PIN_LD13 = IOMUX_PIN(0xff, 41),
- MX31_PIN_LD12 = IOMUX_PIN(0xff, 42),
- MX31_PIN_LD11 = IOMUX_PIN(0xff, 43),
- MX31_PIN_LD10 = IOMUX_PIN(0xff, 44),
- MX31_PIN_LD9 = IOMUX_PIN(0xff, 45),
- MX31_PIN_LD8 = IOMUX_PIN(0xff, 46),
- MX31_PIN_LD7 = IOMUX_PIN(0xff, 47),
- MX31_PIN_LD6 = IOMUX_PIN(0xff, 48),
- MX31_PIN_LD5 = IOMUX_PIN(0xff, 49),
- MX31_PIN_LD4 = IOMUX_PIN(0xff, 50),
- MX31_PIN_LD3 = IOMUX_PIN(0xff, 51),
- MX31_PIN_LD2 = IOMUX_PIN(0xff, 52),
- MX31_PIN_LD1 = IOMUX_PIN(0xff, 53),
- MX31_PIN_LD0 = IOMUX_PIN(0xff, 54),
- MX31_PIN_USBH2_DATA1 = IOMUX_PIN(0xff, 55),
- MX31_PIN_USBH2_DATA0 = IOMUX_PIN(0xff, 56),
- MX31_PIN_USBH2_NXT = IOMUX_PIN(0xff, 57),
- MX31_PIN_USBH2_STP = IOMUX_PIN(0xff, 58),
- MX31_PIN_USBH2_DIR = IOMUX_PIN(0xff, 59),
- MX31_PIN_USBH2_CLK = IOMUX_PIN(0xff, 60),
- MX31_PIN_USBOTG_DATA7 = IOMUX_PIN(0xff, 61),
- MX31_PIN_USBOTG_DATA6 = IOMUX_PIN(0xff, 62),
- MX31_PIN_USBOTG_DATA5 = IOMUX_PIN(0xff, 63),
- MX31_PIN_USBOTG_DATA4 = IOMUX_PIN(0xff, 64),
- MX31_PIN_USBOTG_DATA3 = IOMUX_PIN(0xff, 65),
- MX31_PIN_USBOTG_DATA2 = IOMUX_PIN(0xff, 66),
- MX31_PIN_USBOTG_DATA1 = IOMUX_PIN(0xff, 67),
- MX31_PIN_USBOTG_DATA0 = IOMUX_PIN(0xff, 68),
- MX31_PIN_USBOTG_NXT = IOMUX_PIN(0xff, 69),
- MX31_PIN_USBOTG_STP = IOMUX_PIN(0xff, 70),
- MX31_PIN_USBOTG_DIR = IOMUX_PIN(0xff, 71),
- MX31_PIN_USBOTG_CLK = IOMUX_PIN(0xff, 72),
- MX31_PIN_USB_BYP = IOMUX_PIN(31, 73),
- MX31_PIN_USB_OC = IOMUX_PIN(30, 74),
- MX31_PIN_USB_PWR = IOMUX_PIN(29, 75),
- MX31_PIN_SJC_MOD = IOMUX_PIN(0xff, 76),
- MX31_PIN_DE_B = IOMUX_PIN(0xff, 77),
- MX31_PIN_TRSTB = IOMUX_PIN(0xff, 78),
- MX31_PIN_TDO = IOMUX_PIN(0xff, 79),
- MX31_PIN_TDI = IOMUX_PIN(0xff, 80),
- MX31_PIN_TMS = IOMUX_PIN(0xff, 81),
- MX31_PIN_TCK = IOMUX_PIN(0xff, 82),
- MX31_PIN_RTCK = IOMUX_PIN(0xff, 83),
- MX31_PIN_KEY_COL7 = IOMUX_PIN(57, 84),
- MX31_PIN_KEY_COL6 = IOMUX_PIN(56, 85),
- MX31_PIN_KEY_COL5 = IOMUX_PIN(55, 86),
- MX31_PIN_KEY_COL4 = IOMUX_PIN(54, 87),
- MX31_PIN_KEY_COL3 = IOMUX_PIN(0xff, 88),
- MX31_PIN_KEY_COL2 = IOMUX_PIN(0xff, 89),
- MX31_PIN_KEY_COL1 = IOMUX_PIN(0xff, 90),
- MX31_PIN_KEY_COL0 = IOMUX_PIN(0xff, 91),
- MX31_PIN_KEY_ROW7 = IOMUX_PIN(53, 92),
- MX31_PIN_KEY_ROW6 = IOMUX_PIN(52, 93),
- MX31_PIN_KEY_ROW5 = IOMUX_PIN(51, 94),
- MX31_PIN_KEY_ROW4 = IOMUX_PIN(50, 95),
- MX31_PIN_KEY_ROW3 = IOMUX_PIN(0xff, 96),
- MX31_PIN_KEY_ROW2 = IOMUX_PIN(0xff, 97),
- MX31_PIN_KEY_ROW1 = IOMUX_PIN(0xff, 98),
- MX31_PIN_KEY_ROW0 = IOMUX_PIN(0xff, 99),
- MX31_PIN_BATT_LINE = IOMUX_PIN(49, 100),
- MX31_PIN_CTS2 = IOMUX_PIN(0xff, 101),
- MX31_PIN_RTS2 = IOMUX_PIN(0xff, 102),
- MX31_PIN_TXD2 = IOMUX_PIN(28, 103),
- MX31_PIN_RXD2 = IOMUX_PIN(27, 104),
- MX31_PIN_DTR_DCE2 = IOMUX_PIN(48, 105),
- MX31_PIN_DCD_DTE1 = IOMUX_PIN(47, 106),
- MX31_PIN_RI_DTE1 = IOMUX_PIN(46, 107),
- MX31_PIN_DSR_DTE1 = IOMUX_PIN(45, 108),
- MX31_PIN_DTR_DTE1 = IOMUX_PIN(44, 109),
- MX31_PIN_DCD_DCE1 = IOMUX_PIN(43, 110),
- MX31_PIN_RI_DCE1 = IOMUX_PIN(42, 111),
- MX31_PIN_DSR_DCE1 = IOMUX_PIN(41, 112),
- MX31_PIN_DTR_DCE1 = IOMUX_PIN(40, 113),
- MX31_PIN_CTS1 = IOMUX_PIN(39, 114),
- MX31_PIN_RTS1 = IOMUX_PIN(38, 115),
- MX31_PIN_TXD1 = IOMUX_PIN(37, 116),
- MX31_PIN_RXD1 = IOMUX_PIN(36, 117),
- MX31_PIN_CSPI2_SPI_RDY = IOMUX_PIN(0xff, 118),
- MX31_PIN_CSPI2_SCLK = IOMUX_PIN(0xff, 119),
- MX31_PIN_CSPI2_SS2 = IOMUX_PIN(0xff, 120),
- MX31_PIN_CSPI2_SS1 = IOMUX_PIN(0xff, 121),
- MX31_PIN_CSPI2_SS0 = IOMUX_PIN(0xff, 122),
- MX31_PIN_CSPI2_MISO = IOMUX_PIN(0xff, 123),
- MX31_PIN_CSPI2_MOSI = IOMUX_PIN(0xff, 124),
- MX31_PIN_CSPI1_SPI_RDY = IOMUX_PIN(0xff, 125),
- MX31_PIN_CSPI1_SCLK = IOMUX_PIN(0xff, 126),
- MX31_PIN_CSPI1_SS2 = IOMUX_PIN(0xff, 127),
- MX31_PIN_CSPI1_SS1 = IOMUX_PIN(0xff, 128),
- MX31_PIN_CSPI1_SS0 = IOMUX_PIN(0xff, 129),
- MX31_PIN_CSPI1_MISO = IOMUX_PIN(0xff, 130),
- MX31_PIN_CSPI1_MOSI = IOMUX_PIN(0xff, 131),
- MX31_PIN_SFS6 = IOMUX_PIN(26, 132),
- MX31_PIN_SCK6 = IOMUX_PIN(25, 133),
- MX31_PIN_SRXD6 = IOMUX_PIN(24, 134),
- MX31_PIN_STXD6 = IOMUX_PIN(23, 135),
- MX31_PIN_SFS5 = IOMUX_PIN(0xff, 136),
- MX31_PIN_SCK5 = IOMUX_PIN(0xff, 137),
- MX31_PIN_SRXD5 = IOMUX_PIN(22, 138),
- MX31_PIN_STXD5 = IOMUX_PIN(21, 139),
- MX31_PIN_SFS4 = IOMUX_PIN(0xff, 140),
- MX31_PIN_SCK4 = IOMUX_PIN(0xff, 141),
- MX31_PIN_SRXD4 = IOMUX_PIN(20, 142),
- MX31_PIN_STXD4 = IOMUX_PIN(19, 143),
- MX31_PIN_SFS3 = IOMUX_PIN(0xff, 144),
- MX31_PIN_SCK3 = IOMUX_PIN(0xff, 145),
- MX31_PIN_SRXD3 = IOMUX_PIN(18, 146),
- MX31_PIN_STXD3 = IOMUX_PIN(17, 147),
- MX31_PIN_I2C_DAT = IOMUX_PIN(0xff, 148),
- MX31_PIN_I2C_CLK = IOMUX_PIN(0xff, 149),
- MX31_PIN_CSI_PIXCLK = IOMUX_PIN(83, 150),
- MX31_PIN_CSI_HSYNC = IOMUX_PIN(82, 151),
- MX31_PIN_CSI_VSYNC = IOMUX_PIN(81, 152),
- MX31_PIN_CSI_MCLK = IOMUX_PIN(80, 153),
- MX31_PIN_CSI_D15 = IOMUX_PIN(79, 154),
- MX31_PIN_CSI_D14 = IOMUX_PIN(78, 155),
- MX31_PIN_CSI_D13 = IOMUX_PIN(77, 156),
- MX31_PIN_CSI_D12 = IOMUX_PIN(76, 157),
- MX31_PIN_CSI_D11 = IOMUX_PIN(75, 158),
- MX31_PIN_CSI_D10 = IOMUX_PIN(74, 159),
- MX31_PIN_CSI_D9 = IOMUX_PIN(73, 160),
- MX31_PIN_CSI_D8 = IOMUX_PIN(72, 161),
- MX31_PIN_CSI_D7 = IOMUX_PIN(71, 162),
- MX31_PIN_CSI_D6 = IOMUX_PIN(70, 163),
- MX31_PIN_CSI_D5 = IOMUX_PIN(69, 164),
- MX31_PIN_CSI_D4 = IOMUX_PIN(68, 165),
- MX31_PIN_M_GRANT = IOMUX_PIN(0xff, 166),
- MX31_PIN_M_REQUEST = IOMUX_PIN(0xff, 167),
- MX31_PIN_PC_POE = IOMUX_PIN(0xff, 168),
- MX31_PIN_PC_RW_B = IOMUX_PIN(0xff, 169),
- MX31_PIN_IOIS16 = IOMUX_PIN(0xff, 170),
- MX31_PIN_PC_RST = IOMUX_PIN(0xff, 171),
- MX31_PIN_PC_BVD2 = IOMUX_PIN(0xff, 172),
- MX31_PIN_PC_BVD1 = IOMUX_PIN(0xff, 173),
- MX31_PIN_PC_VS2 = IOMUX_PIN(0xff, 174),
- MX31_PIN_PC_VS1 = IOMUX_PIN(0xff, 175),
- MX31_PIN_PC_PWRON = IOMUX_PIN(0xff, 176),
- MX31_PIN_PC_READY = IOMUX_PIN(0xff, 177),
- MX31_PIN_PC_WAIT_B = IOMUX_PIN(0xff, 178),
- MX31_PIN_PC_CD2_B = IOMUX_PIN(0xff, 179),
- MX31_PIN_PC_CD1_B = IOMUX_PIN(0xff, 180),
- MX31_PIN_D0 = IOMUX_PIN(0xff, 181),
- MX31_PIN_D1 = IOMUX_PIN(0xff, 182),
- MX31_PIN_D2 = IOMUX_PIN(0xff, 183),
- MX31_PIN_D3 = IOMUX_PIN(0xff, 184),
- MX31_PIN_D4 = IOMUX_PIN(0xff, 185),
- MX31_PIN_D5 = IOMUX_PIN(0xff, 186),
- MX31_PIN_D6 = IOMUX_PIN(0xff, 187),
- MX31_PIN_D7 = IOMUX_PIN(0xff, 188),
- MX31_PIN_D8 = IOMUX_PIN(0xff, 189),
- MX31_PIN_D9 = IOMUX_PIN(0xff, 190),
- MX31_PIN_D10 = IOMUX_PIN(0xff, 191),
- MX31_PIN_D11 = IOMUX_PIN(0xff, 192),
- MX31_PIN_D12 = IOMUX_PIN(0xff, 193),
- MX31_PIN_D13 = IOMUX_PIN(0xff, 194),
- MX31_PIN_D14 = IOMUX_PIN(0xff, 195),
- MX31_PIN_D15 = IOMUX_PIN(0xff, 196),
- MX31_PIN_NFRB = IOMUX_PIN(16, 197),
- MX31_PIN_NFCE_B = IOMUX_PIN(15, 198),
- MX31_PIN_NFWP_B = IOMUX_PIN(14, 199),
- MX31_PIN_NFCLE = IOMUX_PIN(13, 200),
- MX31_PIN_NFALE = IOMUX_PIN(12, 201),
- MX31_PIN_NFRE_B = IOMUX_PIN(11, 202),
- MX31_PIN_NFWE_B = IOMUX_PIN(10, 203),
- MX31_PIN_SDQS3 = IOMUX_PIN(0xff, 204),
- MX31_PIN_SDQS2 = IOMUX_PIN(0xff, 205),
- MX31_PIN_SDQS1 = IOMUX_PIN(0xff, 206),
- MX31_PIN_SDQS0 = IOMUX_PIN(0xff, 207),
- MX31_PIN_SDCLK_B = IOMUX_PIN(0xff, 208),
- MX31_PIN_SDCLK = IOMUX_PIN(0xff, 209),
- MX31_PIN_SDCKE1 = IOMUX_PIN(0xff, 210),
- MX31_PIN_SDCKE0 = IOMUX_PIN(0xff, 211),
- MX31_PIN_SDWE = IOMUX_PIN(0xff, 212),
- MX31_PIN_CAS = IOMUX_PIN(0xff, 213),
- MX31_PIN_RAS = IOMUX_PIN(0xff, 214),
- MX31_PIN_RW = IOMUX_PIN(0xff, 215),
- MX31_PIN_BCLK = IOMUX_PIN(0xff, 216),
- MX31_PIN_LBA = IOMUX_PIN(0xff, 217),
- MX31_PIN_ECB = IOMUX_PIN(0xff, 218),
- MX31_PIN_CS5 = IOMUX_PIN(0xff, 219),
- MX31_PIN_CS4 = IOMUX_PIN(0xff, 220),
- MX31_PIN_CS3 = IOMUX_PIN(0xff, 221),
- MX31_PIN_CS2 = IOMUX_PIN(0xff, 222),
- MX31_PIN_CS1 = IOMUX_PIN(0xff, 223),
- MX31_PIN_CS0 = IOMUX_PIN(0xff, 224),
- MX31_PIN_OE = IOMUX_PIN(0xff, 225),
- MX31_PIN_EB1 = IOMUX_PIN(0xff, 226),
- MX31_PIN_EB0 = IOMUX_PIN(0xff, 227),
- MX31_PIN_DQM3 = IOMUX_PIN(0xff, 228),
- MX31_PIN_DQM2 = IOMUX_PIN(0xff, 229),
- MX31_PIN_DQM1 = IOMUX_PIN(0xff, 230),
- MX31_PIN_DQM0 = IOMUX_PIN(0xff, 231),
- MX31_PIN_SD31 = IOMUX_PIN(0xff, 232),
- MX31_PIN_SD30 = IOMUX_PIN(0xff, 233),
- MX31_PIN_SD29 = IOMUX_PIN(0xff, 234),
- MX31_PIN_SD28 = IOMUX_PIN(0xff, 235),
- MX31_PIN_SD27 = IOMUX_PIN(0xff, 236),
- MX31_PIN_SD26 = IOMUX_PIN(0xff, 237),
- MX31_PIN_SD25 = IOMUX_PIN(0xff, 238),
- MX31_PIN_SD24 = IOMUX_PIN(0xff, 239),
- MX31_PIN_SD23 = IOMUX_PIN(0xff, 240),
- MX31_PIN_SD22 = IOMUX_PIN(0xff, 241),
- MX31_PIN_SD21 = IOMUX_PIN(0xff, 242),
- MX31_PIN_SD20 = IOMUX_PIN(0xff, 243),
- MX31_PIN_SD19 = IOMUX_PIN(0xff, 244),
- MX31_PIN_SD18 = IOMUX_PIN(0xff, 245),
- MX31_PIN_SD17 = IOMUX_PIN(0xff, 246),
- MX31_PIN_SD16 = IOMUX_PIN(0xff, 247),
- MX31_PIN_SD15 = IOMUX_PIN(0xff, 248),
- MX31_PIN_SD14 = IOMUX_PIN(0xff, 249),
- MX31_PIN_SD13 = IOMUX_PIN(0xff, 250),
- MX31_PIN_SD12 = IOMUX_PIN(0xff, 251),
- MX31_PIN_SD11 = IOMUX_PIN(0xff, 252),
- MX31_PIN_SD10 = IOMUX_PIN(0xff, 253),
- MX31_PIN_SD9 = IOMUX_PIN(0xff, 254),
- MX31_PIN_SD8 = IOMUX_PIN(0xff, 255),
- MX31_PIN_SD7 = IOMUX_PIN(0xff, 256),
- MX31_PIN_SD6 = IOMUX_PIN(0xff, 257),
- MX31_PIN_SD5 = IOMUX_PIN(0xff, 258),
- MX31_PIN_SD4 = IOMUX_PIN(0xff, 259),
- MX31_PIN_SD3 = IOMUX_PIN(0xff, 260),
- MX31_PIN_SD2 = IOMUX_PIN(0xff, 261),
- MX31_PIN_SD1 = IOMUX_PIN(0xff, 262),
- MX31_PIN_SD0 = IOMUX_PIN(0xff, 263),
- MX31_PIN_SDBA0 = IOMUX_PIN(0xff, 264),
- MX31_PIN_SDBA1 = IOMUX_PIN(0xff, 265),
- MX31_PIN_A25 = IOMUX_PIN(0xff, 266),
- MX31_PIN_A24 = IOMUX_PIN(0xff, 267),
- MX31_PIN_A23 = IOMUX_PIN(0xff, 268),
- MX31_PIN_A22 = IOMUX_PIN(0xff, 269),
- MX31_PIN_A21 = IOMUX_PIN(0xff, 270),
- MX31_PIN_A20 = IOMUX_PIN(0xff, 271),
- MX31_PIN_A19 = IOMUX_PIN(0xff, 272),
- MX31_PIN_A18 = IOMUX_PIN(0xff, 273),
- MX31_PIN_A17 = IOMUX_PIN(0xff, 274),
- MX31_PIN_A16 = IOMUX_PIN(0xff, 275),
- MX31_PIN_A14 = IOMUX_PIN(0xff, 276),
- MX31_PIN_A15 = IOMUX_PIN(0xff, 277),
- MX31_PIN_A13 = IOMUX_PIN(0xff, 278),
- MX31_PIN_A12 = IOMUX_PIN(0xff, 279),
- MX31_PIN_A11 = IOMUX_PIN(0xff, 280),
- MX31_PIN_MA10 = IOMUX_PIN(0xff, 281),
- MX31_PIN_A10 = IOMUX_PIN(0xff, 282),
- MX31_PIN_A9 = IOMUX_PIN(0xff, 283),
- MX31_PIN_A8 = IOMUX_PIN(0xff, 284),
- MX31_PIN_A7 = IOMUX_PIN(0xff, 285),
- MX31_PIN_A6 = IOMUX_PIN(0xff, 286),
- MX31_PIN_A5 = IOMUX_PIN(0xff, 287),
- MX31_PIN_A4 = IOMUX_PIN(0xff, 288),
- MX31_PIN_A3 = IOMUX_PIN(0xff, 289),
- MX31_PIN_A2 = IOMUX_PIN(0xff, 290),
- MX31_PIN_A1 = IOMUX_PIN(0xff, 291),
- MX31_PIN_A0 = IOMUX_PIN(0xff, 292),
- MX31_PIN_VPG1 = IOMUX_PIN(0xff, 293),
- MX31_PIN_VPG0 = IOMUX_PIN(0xff, 294),
- MX31_PIN_DVFS1 = IOMUX_PIN(0xff, 295),
- MX31_PIN_DVFS0 = IOMUX_PIN(0xff, 296),
- MX31_PIN_VSTBY = IOMUX_PIN(0xff, 297),
- MX31_PIN_POWER_FAIL = IOMUX_PIN(0xff, 298),
- MX31_PIN_CKIL = IOMUX_PIN(0xff, 299),
- MX31_PIN_BOOT_MODE4 = IOMUX_PIN(0xff, 300),
- MX31_PIN_BOOT_MODE3 = IOMUX_PIN(0xff, 301),
- MX31_PIN_BOOT_MODE2 = IOMUX_PIN(0xff, 302),
- MX31_PIN_BOOT_MODE1 = IOMUX_PIN(0xff, 303),
- MX31_PIN_BOOT_MODE0 = IOMUX_PIN(0xff, 304),
- MX31_PIN_CLKO = IOMUX_PIN(0xff, 305),
- MX31_PIN_POR_B = IOMUX_PIN(0xff, 306),
- MX31_PIN_RESET_IN_B = IOMUX_PIN(0xff, 307),
- MX31_PIN_CKIH = IOMUX_PIN(0xff, 308),
- MX31_PIN_SIMPD0 = IOMUX_PIN(35, 309),
- MX31_PIN_SRX0 = IOMUX_PIN(34, 310),
- MX31_PIN_STX0 = IOMUX_PIN(33, 311),
- MX31_PIN_SVEN0 = IOMUX_PIN(32, 312),
- MX31_PIN_SRST0 = IOMUX_PIN(67, 313),
- MX31_PIN_SCLK0 = IOMUX_PIN(66, 314),
- MX31_PIN_GPIO3_1 = IOMUX_PIN(65, 315),
- MX31_PIN_GPIO3_0 = IOMUX_PIN(64, 316),
- MX31_PIN_GPIO1_6 = IOMUX_PIN( 6, 317),
- MX31_PIN_GPIO1_5 = IOMUX_PIN( 5, 318),
- MX31_PIN_GPIO1_4 = IOMUX_PIN( 4, 319),
- MX31_PIN_GPIO1_3 = IOMUX_PIN( 3, 320),
- MX31_PIN_GPIO1_2 = IOMUX_PIN( 2, 321),
- MX31_PIN_GPIO1_1 = IOMUX_PIN( 1, 322),
- MX31_PIN_GPIO1_0 = IOMUX_PIN( 0, 323),
- MX31_PIN_PWMO = IOMUX_PIN( 9, 324),
- MX31_PIN_WATCHDOG_RST = IOMUX_PIN(0xff, 325),
- MX31_PIN_COMPARE = IOMUX_PIN( 8, 326),
- MX31_PIN_CAPTURE = IOMUX_PIN( 7, 327),
-};
-
-#define PIN_MAX 327
-#define NB_PORTS 12 /* NB_PINS/32, we chose 32 pins per "PORT" */
-
-/*
- * Convenience values for use with mxc_iomux_mode()
- *
- * Format here is MX31_PIN_(pin name)__(function)
- */
-#define MX31_PIN_CSPI3_MOSI__RXD3 IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI3_MISO__TXD3 IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI3_SCLK__RTS3 IOMUX_MODE(MX31_PIN_CSPI3_SCLK, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI3_SPI_RDY__CTS3 IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CTS1__CTS1 IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_RTS1__RTS1 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_RTS1__SFS IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_TXD1__TXD1 IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_TXD1__SCK IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_RXD1__RXD1 IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_RXD1__STXDA IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_DCD_DCE1__DCD_DCE1 IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_RI_DCE1__RI_DCE1 IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_DSR_DCE1__DSR_DCE1 IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_DTR_DCE1__DTR_DCE1 IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_DTR_DCE1__SRXDA IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_CTS2__CTS2 IOMUX_MODE(MX31_PIN_CTS2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_RTS2__RTS2 IOMUX_MODE(MX31_PIN_RTS2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_TXD2__TXD2 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_RXD2__RXD2 IOMUX_MODE(MX31_PIN_RXD2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_DCD_DTE1__DCD_DTE2 IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_RI_DTE1__RI_DTE2 IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_DSR_DTE1__DSR_DTE2 IOMUX_MODE(MX31_PIN_DSR_DTE1, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_DTR_DTE1__DTR_DTE2 IOMUX_MODE(MX31_PIN_DTR_DTE1, IOMUX_OCONFIG_ALT3 | IOMUX_ICONFIG_NONE)
-#define MX31_PIN_PC_RST__CTS5 IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_PC_VS2__RTS5 IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_PC_BVD2__TXD5 IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_PC_BVD1__RXD5 IOMUX_MODE(MX31_PIN_PC_BVD1, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_CSPI1_MOSI__MOSI IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI1_MISO__MISO IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI1_SCLK__SCLK IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI1_SPI_RDY__SPI_RDY IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI1_SS0__SS0 IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI1_SS1__SS1 IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI1_SS2__SS2 IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI2_MOSI__MOSI IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI2_MOSI__SCL IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI2_MISO__MISO IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI2_MISO__SDA IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI2_SCLK__SCLK IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI2_SPI_RDY__SPI_RDY IOMUX_MODE(MX31_PIN_CSPI2_SPI_RDY, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI2_SS0__SS0 IOMUX_MODE(MX31_PIN_CSPI2_SS0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI2_SS1__SS1 IOMUX_MODE(MX31_PIN_CSPI2_SS1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI2_SS2__SS2 IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI3_MOSI__MOSI IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI3_MISO__MISO IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI3_SCLK__SCLK IOMUX_MODE(MX31_PIN_CSPI3_SCLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI3_SPI_RDY__SPI_RDY IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_BATT_LINE__OWIRE IOMUX_MODE(MX31_PIN_BATT_LINE, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CS4__CS4 IOMUX_MODE(MX31_PIN_CS4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SD1_DATA3__SD1_DATA3 IOMUX_MODE(MX31_PIN_SD1_DATA3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SD1_DATA2__SD1_DATA2 IOMUX_MODE(MX31_PIN_SD1_DATA2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SD1_DATA1__SD1_DATA1 IOMUX_MODE(MX31_PIN_SD1_DATA1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SD1_DATA0__SD1_DATA0 IOMUX_MODE(MX31_PIN_SD1_DATA0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SD1_CLK__SD1_CLK IOMUX_MODE(MX31_PIN_SD1_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SD1_CMD__SD1_CMD IOMUX_MODE(MX31_PIN_SD1_CMD, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_ATA_CS0__GPIO3_26 IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_ATA_CS1__GPIO3_27 IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_PC_PWRON__SD2_DATA3 IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_VS1__SD2_DATA2 IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_READY__SD2_DATA1 IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_WAIT_B__SD2_DATA0 IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_CD2_B__SD2_CLK IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_CD1_B__SD2_CMD IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_ATA_DIOR__GPIO3_28 IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_ATA_DIOW__GPIO3_29 IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_LD0__LD0 IOMUX_MODE(MX31_PIN_LD0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD1__LD1 IOMUX_MODE(MX31_PIN_LD1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD2__LD2 IOMUX_MODE(MX31_PIN_LD2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD3__LD3 IOMUX_MODE(MX31_PIN_LD3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD4__LD4 IOMUX_MODE(MX31_PIN_LD4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD5__LD5 IOMUX_MODE(MX31_PIN_LD5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD6__LD6 IOMUX_MODE(MX31_PIN_LD6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD7__LD7 IOMUX_MODE(MX31_PIN_LD7, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD8__LD8 IOMUX_MODE(MX31_PIN_LD8, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD9__LD9 IOMUX_MODE(MX31_PIN_LD9, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD10__LD10 IOMUX_MODE(MX31_PIN_LD10, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD11__LD11 IOMUX_MODE(MX31_PIN_LD11, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD12__LD12 IOMUX_MODE(MX31_PIN_LD12, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD13__LD13 IOMUX_MODE(MX31_PIN_LD13, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD14__LD14 IOMUX_MODE(MX31_PIN_LD14, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD15__LD15 IOMUX_MODE(MX31_PIN_LD15, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD16__LD16 IOMUX_MODE(MX31_PIN_LD16, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD17__LD17 IOMUX_MODE(MX31_PIN_LD17, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_VSYNC3__VSYNC3 IOMUX_MODE(MX31_PIN_VSYNC3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_HSYNC__HSYNC IOMUX_MODE(MX31_PIN_HSYNC, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_FPSHIFT__FPSHIFT IOMUX_MODE(MX31_PIN_FPSHIFT, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_DRDY0__DRDY0 IOMUX_MODE(MX31_PIN_DRDY0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_D3_REV__D3_REV IOMUX_MODE(MX31_PIN_D3_REV, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CONTRAST__CONTRAST IOMUX_MODE(MX31_PIN_CONTRAST, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_D3_SPL__D3_SPL IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_D3_CLS__D3_CLS IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_GPIO1_1__GPIO IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_CSPI2_SS2__I2C3_SDA IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI2_SCLK__I2C3_SCL IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D7__CSI_D7 IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D8__CSI_D8 IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D9__CSI_D9 IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D10__CSI_D10 IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D11__CSI_D11 IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D12__CSI_D12 IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D13__CSI_D13 IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D14__CSI_D14 IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D15__CSI_D15 IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_HSYNC__CSI_HSYNC IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_MCLK__CSI_MCLK IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_VSYNC__CSI_VSYNC IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_GPIO3_0__GPIO3_0 IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_GPIO3_1__GPIO3_1 IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_CSI_D4__GPIO3_4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_CSI_D5__GPIO3_5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0 IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1 IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2 IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3 IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4 IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5 IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6 IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7 IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_CLK__USBOTG_CLK IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI1_MOSI__USBH1_RXDM IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_MISO__USBH1_RXDP IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SS0__USBH1_TXDM IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SS1__USBH1_TXDP IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SS2__USBH1_RCV IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SCLK__USBH1_OEB IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_SFS6__USBH1_SUSPEND IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_NFRE_B__GPIO1_11 IOMUX_MODE(MX31_PIN_NFRE_B, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_NFALE__GPIO1_12 IOMUX_MODE(MX31_PIN_NFALE, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_USBH2_DATA0__USBH2_DATA0 IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_DATA1__USBH2_DATA1 IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_STXD3__USBH2_DATA2 IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SRXD3__USBH2_DATA3 IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SCK3__USBH2_DATA4 IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SFS3__USBH2_DATA5 IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_STXD6__USBH2_DATA6 IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SRXD6__USBH2_DATA7 IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_CLK__USBH2_CLK IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_DIR__USBH2_DIR IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_NXT__USBH2_NXT IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_STP__USBH2_STP IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SCK6__GPIO1_25 IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_USB_OC__GPIO1_30 IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_I2C_DAT__I2C1_SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_I2C_CLK__I2C1_SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_GPIO1_0__GPIO1_0 IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_SVEN0__GPIO2_0 IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_STX0__GPIO2_1 IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_SRX0__GPIO2_2 IOMUX_MODE(MX31_PIN_SRX0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_SIMPD0__GPIO2_3 IOMUX_MODE(MX31_PIN_SIMPD0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_DTR_DCE1__GPIO2_8 IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_DSR_DCE1__GPIO2_9 IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_RI_DCE1__GPIO2_10 IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_DCD_DCE1__GPIO2_11 IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_STXD5__GPIO1_21 IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_SRXD5__GPIO1_22 IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_GPIO1_3__GPIO1_3 IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_CSPI2_SS1__CSPI3_SS1 IOMUX_MODE(MX31_PIN_CSPI2_SS1, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_RTS1__GPIO2_6 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_CTS1__GPIO2_7 IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_LCS0__GPIO3_23 IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_STXD4__STXD4 IOMUX_MODE(MX31_PIN_STXD4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SRXD4__SRXD4 IOMUX_MODE(MX31_PIN_SRXD4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SCK4__SCK4 IOMUX_MODE(MX31_PIN_SCK4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SFS4__SFS4 IOMUX_MODE(MX31_PIN_SFS4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_STXD5__STXD5 IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SRXD5__SRXD5 IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SCK5__SCK5 IOMUX_MODE(MX31_PIN_SCK5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SFS5__SFS5 IOMUX_MODE(MX31_PIN_SFS5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_ROW0_KEY_ROW0 IOMUX_MODE(MX31_PIN_KEY_ROW0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_ROW1_KEY_ROW1 IOMUX_MODE(MX31_PIN_KEY_ROW1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_ROW2_KEY_ROW2 IOMUX_MODE(MX31_PIN_KEY_ROW2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_ROW3_KEY_ROW3 IOMUX_MODE(MX31_PIN_KEY_ROW3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_ROW4_KEY_ROW4 IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_ROW4_GPIO IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_KEY_ROW5_KEY_ROW5 IOMUX_MODE(MX31_PIN_KEY_ROW5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_ROW6_KEY_ROW6 IOMUX_MODE(MX31_PIN_KEY_ROW6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_ROW7_KEY_ROW7 IOMUX_MODE(MX31_PIN_KEY_ROW7, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_COL0_KEY_COL0 IOMUX_MODE(MX31_PIN_KEY_COL0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_COL1_KEY_COL1 IOMUX_MODE(MX31_PIN_KEY_COL1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_COL2_KEY_COL2 IOMUX_MODE(MX31_PIN_KEY_COL2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_COL3_KEY_COL3 IOMUX_MODE(MX31_PIN_KEY_COL3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_COL4_KEY_COL4 IOMUX_MODE(MX31_PIN_KEY_COL4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_COL5_KEY_COL5 IOMUX_MODE(MX31_PIN_KEY_COL5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_COL6_KEY_COL6 IOMUX_MODE(MX31_PIN_KEY_COL6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_COL7_KEY_COL7 IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_WATCHDOG_RST__WATCHDOG_RST IOMUX_MODE(MX31_PIN_WATCHDOG_RST, IOMUX_CONFIG_FUNC)
-
-
-/*
- * XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed with cspi2_ss0,
- * cspi2_ss1, cspi1_ss0 cspi1_ss1
- */
-
-/*
- * This function configures the pad value for a IOMUX pin.
- */
-void mxc_iomux_set_pad(enum iomux_pins, u32);
-
-#endif /* ifndef __MACH_IOMUX_MX3_H__ */
diff --git a/arch/arm/mach-imx/iomux-mx35.h b/arch/arm/mach-imx/iomux-mx35.h
deleted file mode 100644
index 7fb5259b3ee0..000000000000
--- a/arch/arm/mach-imx/iomux-mx35.h
+++ /dev/null
@@ -1,1254 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
- */
-
-#ifndef __MACH_IOMUX_MX35_H__
-#define __MACH_IOMUX_MX35_H__
-
-#include "iomux-v3.h"
-
-/*
- * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named
- * GPIO_<unit>_<num> see also iomux-v3.h
- */
-
-/* PAD MUX ALT INPSE PATH */
-#define MX35_PAD_CAPTURE__GPT_CAPIN1 IOMUX_PAD(0x328, 0x004, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CAPTURE__GPT_CMPOUT2 IOMUX_PAD(0x328, 0x004, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CAPTURE__CSPI2_SS1 IOMUX_PAD(0x328, 0x004, 2, 0x7f4, 0, NO_PAD_CTRL)
-#define MX35_PAD_CAPTURE__EPIT1_EPITO IOMUX_PAD(0x328, 0x004, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CAPTURE__CCM_CLK32K IOMUX_PAD(0x328, 0x004, 4, 0x7d0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CAPTURE__GPIO1_4 IOMUX_PAD(0x328, 0x004, 5, 0x850, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_COMPARE__GPT_CMPOUT1 IOMUX_PAD(0x32c, 0x008, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_COMPARE__GPT_CAPIN2 IOMUX_PAD(0x32c, 0x008, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_COMPARE__GPT_CMPOUT3 IOMUX_PAD(0x32c, 0x008, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_COMPARE__EPIT2_EPITO IOMUX_PAD(0x32c, 0x008, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_COMPARE__GPIO1_5 IOMUX_PAD(0x32c, 0x008, 5, 0x854, 0, NO_PAD_CTRL)
-#define MX35_PAD_COMPARE__SDMA_EXTDMA_2 IOMUX_PAD(0x32c, 0x008, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_WDOG_RST__WDOG_WDOG_B IOMUX_PAD(0x330, 0x00c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_WDOG_RST__IPU_FLASH_STROBE IOMUX_PAD(0x330, 0x00c, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_WDOG_RST__GPIO1_6 IOMUX_PAD(0x330, 0x00c, 5, 0x858, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_GPIO1_0__GPIO1_0 IOMUX_PAD(0x334, 0x010, 0, 0x82c, 0, NO_PAD_CTRL)
-#define MX35_PAD_GPIO1_0__CCM_PMIC_RDY IOMUX_PAD(0x334, 0x010, 1, 0x7d4, 0, NO_PAD_CTRL)
-#define MX35_PAD_GPIO1_0__OWIRE_LINE IOMUX_PAD(0x334, 0x010, 2, 0x990, 0, NO_PAD_CTRL)
-#define MX35_PAD_GPIO1_0__SDMA_EXTDMA_0 IOMUX_PAD(0x334, 0x010, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_GPIO1_1__GPIO1_1 IOMUX_PAD(0x338, 0x014, 0, 0x838, 0, NO_PAD_CTRL)
-#define MX35_PAD_GPIO1_1__PWM_PWMO IOMUX_PAD(0x338, 0x014, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_GPIO1_1__CSPI1_SS2 IOMUX_PAD(0x338, 0x014, 3, 0x7d8, 0, NO_PAD_CTRL)
-#define MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT IOMUX_PAD(0x338, 0x014, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_GPIO1_1__SDMA_EXTDMA_1 IOMUX_PAD(0x338, 0x014, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_GPIO2_0__GPIO2_0 IOMUX_PAD(0x33c, 0x018, 0, 0x868, 0, NO_PAD_CTRL)
-#define MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK IOMUX_PAD(0x33c, 0x018, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_GPIO3_0__GPIO3_0 IOMUX_PAD(0x340, 0x01c, 0, 0x8e8, 0, NO_PAD_CTRL)
-#define MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK IOMUX_PAD(0x340, 0x01c, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_RESET_IN_B__CCM_RESET_IN_B IOMUX_PAD(0x344, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_POR_B__CCM_POR_B IOMUX_PAD(0x348, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CLKO__CCM_CLKO IOMUX_PAD(0x34c, 0x020, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CLKO__GPIO1_8 IOMUX_PAD(0x34c, 0x020, 5, 0x860, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0 IOMUX_PAD(0x350, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1 IOMUX_PAD(0x354, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0 IOMUX_PAD(0x358, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1 IOMUX_PAD(0x35c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26 IOMUX_PAD(0x360, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_VSTBY__CCM_VSTBY IOMUX_PAD(0x364, 0x024, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_VSTBY__GPIO1_7 IOMUX_PAD(0x364, 0x024, 5, 0x85c, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A0__EMI_EIM_DA_L_0 IOMUX_PAD(0x368, 0x028, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A1__EMI_EIM_DA_L_1 IOMUX_PAD(0x36c, 0x02c, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A2__EMI_EIM_DA_L_2 IOMUX_PAD(0x370, 0x030, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A3__EMI_EIM_DA_L_3 IOMUX_PAD(0x374, 0x034, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A4__EMI_EIM_DA_L_4 IOMUX_PAD(0x378, 0x038, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A5__EMI_EIM_DA_L_5 IOMUX_PAD(0x37c, 0x03c, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A6__EMI_EIM_DA_L_6 IOMUX_PAD(0x380, 0x040, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A7__EMI_EIM_DA_L_7 IOMUX_PAD(0x384, 0x044, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A8__EMI_EIM_DA_H_8 IOMUX_PAD(0x388, 0x048, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A9__EMI_EIM_DA_H_9 IOMUX_PAD(0x38c, 0x04c, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A10__EMI_EIM_DA_H_10 IOMUX_PAD(0x390, 0x050, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_MA10__EMI_MA10 IOMUX_PAD(0x394, 0x054, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A11__EMI_EIM_DA_H_11 IOMUX_PAD(0x398, 0x058, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A12__EMI_EIM_DA_H_12 IOMUX_PAD(0x39c, 0x05c, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A13__EMI_EIM_DA_H_13 IOMUX_PAD(0x3a0, 0x060, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A14__EMI_EIM_DA_H2_14 IOMUX_PAD(0x3a4, 0x064, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A15__EMI_EIM_DA_H2_15 IOMUX_PAD(0x3a8, 0x068, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A16__EMI_EIM_A_16 IOMUX_PAD(0x3ac, 0x06c, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A17__EMI_EIM_A_17 IOMUX_PAD(0x3b0, 0x070, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A18__EMI_EIM_A_18 IOMUX_PAD(0x3b4, 0x074, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A19__EMI_EIM_A_19 IOMUX_PAD(0x3b8, 0x078, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A20__EMI_EIM_A_20 IOMUX_PAD(0x3bc, 0x07c, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A21__EMI_EIM_A_21 IOMUX_PAD(0x3c0, 0x080, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A22__EMI_EIM_A_22 IOMUX_PAD(0x3c4, 0x084, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A23__EMI_EIM_A_23 IOMUX_PAD(0x3c8, 0x088, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A24__EMI_EIM_A_24 IOMUX_PAD(0x3cc, 0x08c, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A25__EMI_EIM_A_25 IOMUX_PAD(0x3d0, 0x090, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SDBA1__EMI_EIM_SDBA1 IOMUX_PAD(0x3d4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SDBA0__EMI_EIM_SDBA0 IOMUX_PAD(0x3d8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD0__EMI_DRAM_D_0 IOMUX_PAD(0x3dc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD1__EMI_DRAM_D_1 IOMUX_PAD(0x3e0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD2__EMI_DRAM_D_2 IOMUX_PAD(0x3e4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD3__EMI_DRAM_D_3 IOMUX_PAD(0x3e8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD4__EMI_DRAM_D_4 IOMUX_PAD(0x3ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD5__EMI_DRAM_D_5 IOMUX_PAD(0x3f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD6__EMI_DRAM_D_6 IOMUX_PAD(0x3f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD7__EMI_DRAM_D_7 IOMUX_PAD(0x3f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD8__EMI_DRAM_D_8 IOMUX_PAD(0x3fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD9__EMI_DRAM_D_9 IOMUX_PAD(0x400, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD10__EMI_DRAM_D_10 IOMUX_PAD(0x404, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD11__EMI_DRAM_D_11 IOMUX_PAD(0x408, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD12__EMI_DRAM_D_12 IOMUX_PAD(0x40c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD13__EMI_DRAM_D_13 IOMUX_PAD(0x410, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD14__EMI_DRAM_D_14 IOMUX_PAD(0x414, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD15__EMI_DRAM_D_15 IOMUX_PAD(0x418, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD16__EMI_DRAM_D_16 IOMUX_PAD(0x41c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD17__EMI_DRAM_D_17 IOMUX_PAD(0x420, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD18__EMI_DRAM_D_18 IOMUX_PAD(0x424, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD19__EMI_DRAM_D_19 IOMUX_PAD(0x428, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD20__EMI_DRAM_D_20 IOMUX_PAD(0x42c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD21__EMI_DRAM_D_21 IOMUX_PAD(0x430, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD22__EMI_DRAM_D_22 IOMUX_PAD(0x434, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD23__EMI_DRAM_D_23 IOMUX_PAD(0x438, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD24__EMI_DRAM_D_24 IOMUX_PAD(0x43c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD25__EMI_DRAM_D_25 IOMUX_PAD(0x440, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD26__EMI_DRAM_D_26 IOMUX_PAD(0x444, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD27__EMI_DRAM_D_27 IOMUX_PAD(0x448, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD28__EMI_DRAM_D_28 IOMUX_PAD(0x44c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD29__EMI_DRAM_D_29 IOMUX_PAD(0x450, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD30__EMI_DRAM_D_30 IOMUX_PAD(0x454, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD31__EMI_DRAM_D_31 IOMUX_PAD(0x458, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_DQM0__EMI_DRAM_DQM_0 IOMUX_PAD(0x45c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_DQM1__EMI_DRAM_DQM_1 IOMUX_PAD(0x460, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_DQM2__EMI_DRAM_DQM_2 IOMUX_PAD(0x464, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_DQM3__EMI_DRAM_DQM_3 IOMUX_PAD(0x468, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_EB0__EMI_EIM_EB0_B IOMUX_PAD(0x46c, 0x094, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_EB1__EMI_EIM_EB1_B IOMUX_PAD(0x470, 0x098, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_OE__EMI_EIM_OE IOMUX_PAD(0x474, 0x09c, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CS0__EMI_EIM_CS0 IOMUX_PAD(0x478, 0x0a0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CS1__EMI_EIM_CS1 IOMUX_PAD(0x47c, 0x0a4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CS1__EMI_NANDF_CE3 IOMUX_PAD(0x47c, 0x0a4, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CS2__EMI_EIM_CS2 IOMUX_PAD(0x480, 0x0a8, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CS3__EMI_EIM_CS3 IOMUX_PAD(0x484, 0x0ac, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CS4__EMI_EIM_CS4 IOMUX_PAD(0x488, 0x0b0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CS4__EMI_DTACK_B IOMUX_PAD(0x488, 0x0b0, 1, 0x800, 0, NO_PAD_CTRL)
-#define MX35_PAD_CS4__EMI_NANDF_CE1 IOMUX_PAD(0x488, 0x0b0, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CS4__GPIO1_20 IOMUX_PAD(0x488, 0x0b0, 5, 0x83c, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CS5__EMI_EIM_CS5 IOMUX_PAD(0x48c, 0x0b4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CS5__CSPI2_SS2 IOMUX_PAD(0x48c, 0x0b4, 1, 0x7f8, 0, NO_PAD_CTRL)
-#define MX35_PAD_CS5__CSPI1_SS2 IOMUX_PAD(0x48c, 0x0b4, 2, 0x7d8, 1, NO_PAD_CTRL)
-#define MX35_PAD_CS5__EMI_NANDF_CE2 IOMUX_PAD(0x48c, 0x0b4, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CS5__GPIO1_21 IOMUX_PAD(0x48c, 0x0b4, 5, 0x840, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_NF_CE0__EMI_NANDF_CE0 IOMUX_PAD(0x490, 0x0b8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NF_CE0__GPIO1_22 IOMUX_PAD(0x490, 0x0b8, 5, 0x844, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ECB__EMI_EIM_ECB IOMUX_PAD(0x494, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LBA__EMI_EIM_LBA IOMUX_PAD(0x498, 0x0bc, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_BCLK__EMI_EIM_BCLK IOMUX_PAD(0x49c, 0x0c0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_RW__EMI_EIM_RW IOMUX_PAD(0x4a0, 0x0c4, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_RAS__EMI_DRAM_RAS IOMUX_PAD(0x4a4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CAS__EMI_DRAM_CAS IOMUX_PAD(0x4a8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SDWE__EMI_DRAM_SDWE IOMUX_PAD(0x4ac, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0 IOMUX_PAD(0x4b0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1 IOMUX_PAD(0x4b4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SDCLK__EMI_DRAM_SDCLK IOMUX_PAD(0x4b8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SDQS0__EMI_DRAM_SDQS_0 IOMUX_PAD(0x4bc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SDQS1__EMI_DRAM_SDQS_1 IOMUX_PAD(0x4c0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SDQS2__EMI_DRAM_SDQS_2 IOMUX_PAD(0x4c4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SDQS3__EMI_DRAM_SDQS_3 IOMUX_PAD(0x4c8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_NFWE_B__EMI_NANDF_WE_B IOMUX_PAD(0x4cc, 0x0c8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3 IOMUX_PAD(0x4cc, 0x0c8, 1, 0x9d8, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x4cc, 0x0c8, 2, 0x924, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFWE_B__GPIO2_18 IOMUX_PAD(0x4cc, 0x0c8, 5, 0x88c, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0 IOMUX_PAD(0x4cc, 0x0c8, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_NFRE_B__EMI_NANDF_RE_B IOMUX_PAD(0x4d0, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR IOMUX_PAD(0x4d0, 0x0cc, 1, 0x9ec, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFRE_B__IPU_DISPB_BCLK IOMUX_PAD(0x4d0, 0x0cc, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFRE_B__GPIO2_19 IOMUX_PAD(0x4d0, 0x0cc, 5, 0x890, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1 IOMUX_PAD(0x4d0, 0x0cc, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_NFALE__EMI_NANDF_ALE IOMUX_PAD(0x4d4, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFALE__USB_TOP_USBH2_STP IOMUX_PAD(0x4d4, 0x0d0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFALE__IPU_DISPB_CS0 IOMUX_PAD(0x4d4, 0x0d0, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFALE__GPIO2_20 IOMUX_PAD(0x4d4, 0x0d0, 5, 0x898, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFALE__ARM11P_TOP_TRACE_2 IOMUX_PAD(0x4d4, 0x0d0, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_NFCLE__EMI_NANDF_CLE IOMUX_PAD(0x4d8, 0x0d4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFCLE__USB_TOP_USBH2_NXT IOMUX_PAD(0x4d8, 0x0d4, 1, 0x9f0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFCLE__IPU_DISPB_PAR_RS IOMUX_PAD(0x4d8, 0x0d4, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFCLE__GPIO2_21 IOMUX_PAD(0x4d8, 0x0d4, 5, 0x89c, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3 IOMUX_PAD(0x4d8, 0x0d4, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_NFWP_B__EMI_NANDF_WP_B IOMUX_PAD(0x4dc, 0x0d8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7 IOMUX_PAD(0x4dc, 0x0d8, 1, 0x9e8, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFWP_B__IPU_DISPB_WR IOMUX_PAD(0x4dc, 0x0d8, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFWP_B__GPIO2_22 IOMUX_PAD(0x4dc, 0x0d8, 5, 0x8a0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL IOMUX_PAD(0x4dc, 0x0d8, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_NFRB__EMI_NANDF_RB IOMUX_PAD(0x4e0, 0x0dc, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFRB__IPU_DISPB_RD IOMUX_PAD(0x4e0, 0x0dc, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFRB__GPIO2_23 IOMUX_PAD(0x4e0, 0x0dc, 5, 0x8a4, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFRB__ARM11P_TOP_TRCLK IOMUX_PAD(0x4e0, 0x0dc, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D15__EMI_EIM_D_15 IOMUX_PAD(0x4e4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D14__EMI_EIM_D_14 IOMUX_PAD(0x4e8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D13__EMI_EIM_D_13 IOMUX_PAD(0x4ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D12__EMI_EIM_D_12 IOMUX_PAD(0x4f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D11__EMI_EIM_D_11 IOMUX_PAD(0x4f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D10__EMI_EIM_D_10 IOMUX_PAD(0x4f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D9__EMI_EIM_D_9 IOMUX_PAD(0x4fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D8__EMI_EIM_D_8 IOMUX_PAD(0x500, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D7__EMI_EIM_D_7 IOMUX_PAD(0x504, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D6__EMI_EIM_D_6 IOMUX_PAD(0x508, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D5__EMI_EIM_D_5 IOMUX_PAD(0x50c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D4__EMI_EIM_D_4 IOMUX_PAD(0x510, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D3__EMI_EIM_D_3 IOMUX_PAD(0x514, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D2__EMI_EIM_D_2 IOMUX_PAD(0x518, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D1__EMI_EIM_D_1 IOMUX_PAD(0x51c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D0__EMI_EIM_D_0 IOMUX_PAD(0x520, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_D8__IPU_CSI_D_8 IOMUX_PAD(0x524, 0x0e0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D8__KPP_COL_0 IOMUX_PAD(0x524, 0x0e0, 1, 0x950, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D8__GPIO1_20 IOMUX_PAD(0x524, 0x0e0, 5, 0x83c, 1, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13 IOMUX_PAD(0x524, 0x0e0, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_D9__IPU_CSI_D_9 IOMUX_PAD(0x528, 0x0e4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D9__KPP_COL_1 IOMUX_PAD(0x528, 0x0e4, 1, 0x954, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D9__GPIO1_21 IOMUX_PAD(0x528, 0x0e4, 5, 0x840, 1, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14 IOMUX_PAD(0x528, 0x0e4, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_D10__IPU_CSI_D_10 IOMUX_PAD(0x52c, 0x0e8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D10__KPP_COL_2 IOMUX_PAD(0x52c, 0x0e8, 1, 0x958, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D10__GPIO1_22 IOMUX_PAD(0x52c, 0x0e8, 5, 0x844, 1, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15 IOMUX_PAD(0x52c, 0x0e8, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_D11__IPU_CSI_D_11 IOMUX_PAD(0x530, 0x0ec, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D11__KPP_COL_3 IOMUX_PAD(0x530, 0x0ec, 1, 0x95c, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D11__GPIO1_23 IOMUX_PAD(0x530, 0x0ec, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_D12__IPU_CSI_D_12 IOMUX_PAD(0x534, 0x0f0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D12__KPP_ROW_0 IOMUX_PAD(0x534, 0x0f0, 1, 0x970, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D12__GPIO1_24 IOMUX_PAD(0x534, 0x0f0, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_D13__IPU_CSI_D_13 IOMUX_PAD(0x538, 0x0f4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D13__KPP_ROW_1 IOMUX_PAD(0x538, 0x0f4, 1, 0x974, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D13__GPIO1_25 IOMUX_PAD(0x538, 0x0f4, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_D14__IPU_CSI_D_14 IOMUX_PAD(0x53c, 0x0f8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D14__KPP_ROW_2 IOMUX_PAD(0x53c, 0x0f8, 1, 0x978, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D14__GPIO1_26 IOMUX_PAD(0x53c, 0x0f8, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_D15__IPU_CSI_D_15 IOMUX_PAD(0x540, 0x0fc, 0, 0x97c, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D15__KPP_ROW_3 IOMUX_PAD(0x540, 0x0fc, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D15__GPIO1_27 IOMUX_PAD(0x540, 0x0fc, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_MCLK__IPU_CSI_MCLK IOMUX_PAD(0x544, 0x100, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_MCLK__GPIO1_28 IOMUX_PAD(0x544, 0x100, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC IOMUX_PAD(0x548, 0x104, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_VSYNC__GPIO1_29 IOMUX_PAD(0x548, 0x104, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC IOMUX_PAD(0x54c, 0x108, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_HSYNC__GPIO1_30 IOMUX_PAD(0x54c, 0x108, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK IOMUX_PAD(0x550, 0x10c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_PIXCLK__GPIO1_31 IOMUX_PAD(0x550, 0x10c, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_I2C1_CLK__I2C1_SCL IOMUX_PAD(0x554, 0x110, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_I2C1_CLK__GPIO2_24 IOMUX_PAD(0x554, 0x110, 5, 0x8a8, 0, NO_PAD_CTRL)
-#define MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK IOMUX_PAD(0x554, 0x110, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_I2C1_DAT__I2C1_SDA IOMUX_PAD(0x558, 0x114, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_I2C1_DAT__GPIO2_25 IOMUX_PAD(0x558, 0x114, 5, 0x8ac, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_I2C2_CLK__I2C2_SCL IOMUX_PAD(0x55c, 0x118, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_I2C2_CLK__CAN1_TXCAN IOMUX_PAD(0x55c, 0x118, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR IOMUX_PAD(0x55c, 0x118, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_I2C2_CLK__GPIO2_26 IOMUX_PAD(0x55c, 0x118, 5, 0x8b0, 0, NO_PAD_CTRL)
-#define MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2 IOMUX_PAD(0x55c, 0x118, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_I2C2_DAT__I2C2_SDA IOMUX_PAD(0x560, 0x11c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_I2C2_DAT__CAN1_RXCAN IOMUX_PAD(0x560, 0x11c, 1, 0x7c8, 0, NO_PAD_CTRL)
-#define MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC IOMUX_PAD(0x560, 0x11c, 2, 0x9f4, 0, NO_PAD_CTRL)
-#define MX35_PAD_I2C2_DAT__GPIO2_27 IOMUX_PAD(0x560, 0x11c, 5, 0x8b4, 0, NO_PAD_CTRL)
-#define MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3 IOMUX_PAD(0x560, 0x11c, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_STXD4__AUDMUX_AUD4_TXD IOMUX_PAD(0x564, 0x120, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_STXD4__GPIO2_28 IOMUX_PAD(0x564, 0x120, 5, 0x8b8, 0, NO_PAD_CTRL)
-#define MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0 IOMUX_PAD(0x564, 0x120, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SRXD4__AUDMUX_AUD4_RXD IOMUX_PAD(0x568, 0x124, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SRXD4__GPIO2_29 IOMUX_PAD(0x568, 0x124, 5, 0x8bc, 0, NO_PAD_CTRL)
-#define MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1 IOMUX_PAD(0x568, 0x124, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SCK4__AUDMUX_AUD4_TXC IOMUX_PAD(0x56c, 0x128, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SCK4__GPIO2_30 IOMUX_PAD(0x56c, 0x128, 5, 0x8c4, 0, NO_PAD_CTRL)
-#define MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2 IOMUX_PAD(0x56c, 0x128, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS IOMUX_PAD(0x570, 0x12c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_STXFS4__GPIO2_31 IOMUX_PAD(0x570, 0x12c, 5, 0x8c8, 0, NO_PAD_CTRL)
-#define MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3 IOMUX_PAD(0x570, 0x12c, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_STXD5__AUDMUX_AUD5_TXD IOMUX_PAD(0x574, 0x130, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_STXD5__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x574, 0x130, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_STXD5__CSPI2_MOSI IOMUX_PAD(0x574, 0x130, 2, 0x7ec, 0, NO_PAD_CTRL)
-#define MX35_PAD_STXD5__GPIO1_0 IOMUX_PAD(0x574, 0x130, 5, 0x82c, 1, NO_PAD_CTRL)
-#define MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4 IOMUX_PAD(0x574, 0x130, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SRXD5__AUDMUX_AUD5_RXD IOMUX_PAD(0x578, 0x134, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SRXD5__SPDIF_SPDIF_IN1 IOMUX_PAD(0x578, 0x134, 1, 0x998, 0, NO_PAD_CTRL)
-#define MX35_PAD_SRXD5__CSPI2_MISO IOMUX_PAD(0x578, 0x134, 2, 0x7e8, 0, NO_PAD_CTRL)
-#define MX35_PAD_SRXD5__GPIO1_1 IOMUX_PAD(0x578, 0x134, 5, 0x838, 1, NO_PAD_CTRL)
-#define MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5 IOMUX_PAD(0x578, 0x134, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SCK5__AUDMUX_AUD5_TXC IOMUX_PAD(0x57c, 0x138, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x57c, 0x138, 1, 0x994, 0, NO_PAD_CTRL)
-#define MX35_PAD_SCK5__CSPI2_SCLK IOMUX_PAD(0x57c, 0x138, 2, 0x7e0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SCK5__GPIO1_2 IOMUX_PAD(0x57c, 0x138, 5, 0x848, 0, NO_PAD_CTRL)
-#define MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6 IOMUX_PAD(0x57c, 0x138, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS IOMUX_PAD(0x580, 0x13c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_STXFS5__CSPI2_RDY IOMUX_PAD(0x580, 0x13c, 2, 0x7e4, 0, NO_PAD_CTRL)
-#define MX35_PAD_STXFS5__GPIO1_3 IOMUX_PAD(0x580, 0x13c, 5, 0x84c, 0, NO_PAD_CTRL)
-#define MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7 IOMUX_PAD(0x580, 0x13c, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SCKR__ESAI_SCKR IOMUX_PAD(0x584, 0x140, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SCKR__GPIO1_4 IOMUX_PAD(0x584, 0x140, 5, 0x850, 1, NO_PAD_CTRL)
-#define MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10 IOMUX_PAD(0x584, 0x140, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FSR__ESAI_FSR IOMUX_PAD(0x588, 0x144, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FSR__GPIO1_5 IOMUX_PAD(0x588, 0x144, 5, 0x854, 1, NO_PAD_CTRL)
-#define MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11 IOMUX_PAD(0x588, 0x144, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_HCKR__ESAI_HCKR IOMUX_PAD(0x58c, 0x148, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_HCKR__AUDMUX_AUD5_RXFS IOMUX_PAD(0x58c, 0x148, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_HCKR__CSPI2_SS0 IOMUX_PAD(0x58c, 0x148, 2, 0x7f0, 0, NO_PAD_CTRL)
-#define MX35_PAD_HCKR__IPU_FLASH_STROBE IOMUX_PAD(0x58c, 0x148, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_HCKR__GPIO1_6 IOMUX_PAD(0x58c, 0x148, 5, 0x858, 1, NO_PAD_CTRL)
-#define MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12 IOMUX_PAD(0x58c, 0x148, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SCKT__ESAI_SCKT IOMUX_PAD(0x590, 0x14c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SCKT__GPIO1_7 IOMUX_PAD(0x590, 0x14c, 5, 0x85c, 1, NO_PAD_CTRL)
-#define MX35_PAD_SCKT__IPU_CSI_D_0 IOMUX_PAD(0x590, 0x14c, 6, 0x930, 0, NO_PAD_CTRL)
-#define MX35_PAD_SCKT__KPP_ROW_2 IOMUX_PAD(0x590, 0x14c, 7, 0x978, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_FST__ESAI_FST IOMUX_PAD(0x594, 0x150, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FST__GPIO1_8 IOMUX_PAD(0x594, 0x150, 5, 0x860, 1, NO_PAD_CTRL)
-#define MX35_PAD_FST__IPU_CSI_D_1 IOMUX_PAD(0x594, 0x150, 6, 0x934, 0, NO_PAD_CTRL)
-#define MX35_PAD_FST__KPP_ROW_3 IOMUX_PAD(0x594, 0x150, 7, 0x97c, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_HCKT__ESAI_HCKT IOMUX_PAD(0x598, 0x154, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_HCKT__AUDMUX_AUD5_RXC IOMUX_PAD(0x598, 0x154, 1, 0x7a8, 0, NO_PAD_CTRL)
-#define MX35_PAD_HCKT__GPIO1_9 IOMUX_PAD(0x598, 0x154, 5, 0x864, 0, NO_PAD_CTRL)
-#define MX35_PAD_HCKT__IPU_CSI_D_2 IOMUX_PAD(0x598, 0x154, 6, 0x938, 0, NO_PAD_CTRL)
-#define MX35_PAD_HCKT__KPP_COL_3 IOMUX_PAD(0x598, 0x154, 7, 0x95c, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_TX5_RX0__ESAI_TX5_RX0 IOMUX_PAD(0x59c, 0x158, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC IOMUX_PAD(0x59c, 0x158, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX5_RX0__CSPI2_SS2 IOMUX_PAD(0x59c, 0x158, 2, 0x7f8, 1, NO_PAD_CTRL)
-#define MX35_PAD_TX5_RX0__CAN2_TXCAN IOMUX_PAD(0x59c, 0x158, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX5_RX0__UART2_DTR IOMUX_PAD(0x59c, 0x158, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX5_RX0__GPIO1_10 IOMUX_PAD(0x59c, 0x158, 5, 0x830, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0 IOMUX_PAD(0x59c, 0x158, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_TX4_RX1__ESAI_TX4_RX1 IOMUX_PAD(0x5a0, 0x15c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS IOMUX_PAD(0x5a0, 0x15c, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX4_RX1__CSPI2_SS3 IOMUX_PAD(0x5a0, 0x15c, 2, 0x7fc, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX4_RX1__CAN2_RXCAN IOMUX_PAD(0x5a0, 0x15c, 3, 0x7cc, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX4_RX1__UART2_DSR IOMUX_PAD(0x5a0, 0x15c, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX4_RX1__GPIO1_11 IOMUX_PAD(0x5a0, 0x15c, 5, 0x834, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX4_RX1__IPU_CSI_D_3 IOMUX_PAD(0x5a0, 0x15c, 6, 0x93c, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX4_RX1__KPP_ROW_0 IOMUX_PAD(0x5a0, 0x15c, 7, 0x970, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_TX3_RX2__ESAI_TX3_RX2 IOMUX_PAD(0x5a4, 0x160, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX3_RX2__I2C3_SCL IOMUX_PAD(0x5a4, 0x160, 1, 0x91c, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX3_RX2__EMI_NANDF_CE1 IOMUX_PAD(0x5a4, 0x160, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX3_RX2__GPIO1_12 IOMUX_PAD(0x5a4, 0x160, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX3_RX2__IPU_CSI_D_4 IOMUX_PAD(0x5a4, 0x160, 6, 0x940, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX3_RX2__KPP_ROW_1 IOMUX_PAD(0x5a4, 0x160, 7, 0x974, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_TX2_RX3__ESAI_TX2_RX3 IOMUX_PAD(0x5a8, 0x164, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX2_RX3__I2C3_SDA IOMUX_PAD(0x5a8, 0x164, 1, 0x920, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX2_RX3__EMI_NANDF_CE2 IOMUX_PAD(0x5a8, 0x164, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX2_RX3__GPIO1_13 IOMUX_PAD(0x5a8, 0x164, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX2_RX3__IPU_CSI_D_5 IOMUX_PAD(0x5a8, 0x164, 6, 0x944, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX2_RX3__KPP_COL_0 IOMUX_PAD(0x5a8, 0x164, 7, 0x950, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_TX1__ESAI_TX1 IOMUX_PAD(0x5ac, 0x168, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX1__CCM_PMIC_RDY IOMUX_PAD(0x5ac, 0x168, 1, 0x7d4, 1, NO_PAD_CTRL)
-#define MX35_PAD_TX1__CSPI1_SS2 IOMUX_PAD(0x5ac, 0x168, 2, 0x7d8, 2, NO_PAD_CTRL)
-#define MX35_PAD_TX1__EMI_NANDF_CE3 IOMUX_PAD(0x5ac, 0x168, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX1__UART2_RI IOMUX_PAD(0x5ac, 0x168, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX1__GPIO1_14 IOMUX_PAD(0x5ac, 0x168, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX1__IPU_CSI_D_6 IOMUX_PAD(0x5ac, 0x168, 6, 0x948, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX1__KPP_COL_1 IOMUX_PAD(0x5ac, 0x168, 7, 0x954, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_TX0__ESAI_TX0 IOMUX_PAD(0x5b0, 0x16c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x5b0, 0x16c, 1, 0x994, 1, NO_PAD_CTRL)
-#define MX35_PAD_TX0__CSPI1_SS3 IOMUX_PAD(0x5b0, 0x16c, 2, 0x7dc, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX0__EMI_DTACK_B IOMUX_PAD(0x5b0, 0x16c, 3, 0x800, 1, NO_PAD_CTRL)
-#define MX35_PAD_TX0__UART2_DCD IOMUX_PAD(0x5b0, 0x16c, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX0__GPIO1_15 IOMUX_PAD(0x5b0, 0x16c, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX0__IPU_CSI_D_7 IOMUX_PAD(0x5b0, 0x16c, 6, 0x94c, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX0__KPP_COL_2 IOMUX_PAD(0x5b0, 0x16c, 7, 0x958, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_CSPI1_MOSI__CSPI1_MOSI IOMUX_PAD(0x5b4, 0x170, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_MOSI__GPIO1_16 IOMUX_PAD(0x5b4, 0x170, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2 IOMUX_PAD(0x5b4, 0x170, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSPI1_MISO__CSPI1_MISO IOMUX_PAD(0x5b8, 0x174, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_MISO__GPIO1_17 IOMUX_PAD(0x5b8, 0x174, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3 IOMUX_PAD(0x5b8, 0x174, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSPI1_SS0__CSPI1_SS0 IOMUX_PAD(0x5bc, 0x178, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SS0__OWIRE_LINE IOMUX_PAD(0x5bc, 0x178, 1, 0x990, 1, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SS0__CSPI2_SS3 IOMUX_PAD(0x5bc, 0x178, 2, 0x7fc, 1, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SS0__GPIO1_18 IOMUX_PAD(0x5bc, 0x178, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4 IOMUX_PAD(0x5bc, 0x178, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSPI1_SS1__CSPI1_SS1 IOMUX_PAD(0x5c0, 0x17c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SS1__PWM_PWMO IOMUX_PAD(0x5c0, 0x17c, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SS1__CCM_CLK32K IOMUX_PAD(0x5c0, 0x17c, 2, 0x7d0, 1, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SS1__GPIO1_19 IOMUX_PAD(0x5c0, 0x17c, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SS1__IPU_DIAGB_29 IOMUX_PAD(0x5c0, 0x17c, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5 IOMUX_PAD(0x5c0, 0x17c, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSPI1_SCLK__CSPI1_SCLK IOMUX_PAD(0x5c4, 0x180, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SCLK__GPIO3_4 IOMUX_PAD(0x5c4, 0x180, 5, 0x904, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30 IOMUX_PAD(0x5c4, 0x180, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1 IOMUX_PAD(0x5c4, 0x180, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY IOMUX_PAD(0x5c8, 0x184, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SPI_RDY__GPIO3_5 IOMUX_PAD(0x5c8, 0x184, 5, 0x908, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31 IOMUX_PAD(0x5c8, 0x184, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2 IOMUX_PAD(0x5c8, 0x184, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_RXD1__UART1_RXD_MUX IOMUX_PAD(0x5cc, 0x188, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_RXD1__CSPI2_MOSI IOMUX_PAD(0x5cc, 0x188, 1, 0x7ec, 1, NO_PAD_CTRL)
-#define MX35_PAD_RXD1__KPP_COL_4 IOMUX_PAD(0x5cc, 0x188, 4, 0x960, 0, NO_PAD_CTRL)
-#define MX35_PAD_RXD1__GPIO3_6 IOMUX_PAD(0x5cc, 0x188, 5, 0x90c, 0, NO_PAD_CTRL)
-#define MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16 IOMUX_PAD(0x5cc, 0x188, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_TXD1__UART1_TXD_MUX IOMUX_PAD(0x5d0, 0x18c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TXD1__CSPI2_MISO IOMUX_PAD(0x5d0, 0x18c, 1, 0x7e8, 1, NO_PAD_CTRL)
-#define MX35_PAD_TXD1__KPP_COL_5 IOMUX_PAD(0x5d0, 0x18c, 4, 0x964, 0, NO_PAD_CTRL)
-#define MX35_PAD_TXD1__GPIO3_7 IOMUX_PAD(0x5d0, 0x18c, 5, 0x910, 0, NO_PAD_CTRL)
-#define MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17 IOMUX_PAD(0x5d0, 0x18c, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_RTS1__UART1_RTS IOMUX_PAD(0x5d4, 0x190, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_RTS1__CSPI2_SCLK IOMUX_PAD(0x5d4, 0x190, 1, 0x7e0, 1, NO_PAD_CTRL)
-#define MX35_PAD_RTS1__I2C3_SCL IOMUX_PAD(0x5d4, 0x190, 2, 0x91c, 1, NO_PAD_CTRL)
-#define MX35_PAD_RTS1__IPU_CSI_D_0 IOMUX_PAD(0x5d4, 0x190, 3, 0x930, 1, NO_PAD_CTRL)
-#define MX35_PAD_RTS1__KPP_COL_6 IOMUX_PAD(0x5d4, 0x190, 4, 0x968, 0, NO_PAD_CTRL)
-#define MX35_PAD_RTS1__GPIO3_8 IOMUX_PAD(0x5d4, 0x190, 5, 0x914, 0, NO_PAD_CTRL)
-#define MX35_PAD_RTS1__EMI_NANDF_CE1 IOMUX_PAD(0x5d4, 0x190, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18 IOMUX_PAD(0x5d4, 0x190, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CTS1__UART1_CTS IOMUX_PAD(0x5d8, 0x194, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CTS1__CSPI2_RDY IOMUX_PAD(0x5d8, 0x194, 1, 0x7e4, 1, NO_PAD_CTRL)
-#define MX35_PAD_CTS1__I2C3_SDA IOMUX_PAD(0x5d8, 0x194, 2, 0x920, 1, NO_PAD_CTRL)
-#define MX35_PAD_CTS1__IPU_CSI_D_1 IOMUX_PAD(0x5d8, 0x194, 3, 0x934, 1, NO_PAD_CTRL)
-#define MX35_PAD_CTS1__KPP_COL_7 IOMUX_PAD(0x5d8, 0x194, 4, 0x96c, 0, NO_PAD_CTRL)
-#define MX35_PAD_CTS1__GPIO3_9 IOMUX_PAD(0x5d8, 0x194, 5, 0x918, 0, NO_PAD_CTRL)
-#define MX35_PAD_CTS1__EMI_NANDF_CE2 IOMUX_PAD(0x5d8, 0x194, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19 IOMUX_PAD(0x5d8, 0x194, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_RXD2__UART2_RXD_MUX IOMUX_PAD(0x5dc, 0x198, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_RXD2__KPP_ROW_4 IOMUX_PAD(0x5dc, 0x198, 4, 0x980, 0, NO_PAD_CTRL)
-#define MX35_PAD_RXD2__GPIO3_10 IOMUX_PAD(0x5dc, 0x198, 5, 0x8ec, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_TXD2__UART2_TXD_MUX IOMUX_PAD(0x5e0, 0x19c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x5e0, 0x19c, 1, 0x994, 2, NO_PAD_CTRL)
-#define MX35_PAD_TXD2__KPP_ROW_5 IOMUX_PAD(0x5e0, 0x19c, 4, 0x984, 0, NO_PAD_CTRL)
-#define MX35_PAD_TXD2__GPIO3_11 IOMUX_PAD(0x5e0, 0x19c, 5, 0x8f0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_RTS2__UART2_RTS IOMUX_PAD(0x5e4, 0x1a0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_RTS2__SPDIF_SPDIF_IN1 IOMUX_PAD(0x5e4, 0x1a0, 1, 0x998, 1, NO_PAD_CTRL)
-#define MX35_PAD_RTS2__CAN2_RXCAN IOMUX_PAD(0x5e4, 0x1a0, 2, 0x7cc, 1, NO_PAD_CTRL)
-#define MX35_PAD_RTS2__IPU_CSI_D_2 IOMUX_PAD(0x5e4, 0x1a0, 3, 0x938, 1, NO_PAD_CTRL)
-#define MX35_PAD_RTS2__KPP_ROW_6 IOMUX_PAD(0x5e4, 0x1a0, 4, 0x988, 0, NO_PAD_CTRL)
-#define MX35_PAD_RTS2__GPIO3_12 IOMUX_PAD(0x5e4, 0x1a0, 5, 0x8f4, 0, NO_PAD_CTRL)
-#define MX35_PAD_RTS2__AUDMUX_AUD5_RXC IOMUX_PAD(0x5e4, 0x1a0, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_RTS2__UART3_RXD_MUX IOMUX_PAD(0x5e4, 0x1a0, 7, 0x9a0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CTS2__UART2_CTS IOMUX_PAD(0x5e8, 0x1a4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CTS2__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x5e8, 0x1a4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CTS2__CAN2_TXCAN IOMUX_PAD(0x5e8, 0x1a4, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CTS2__IPU_CSI_D_3 IOMUX_PAD(0x5e8, 0x1a4, 3, 0x93c, 1, NO_PAD_CTRL)
-#define MX35_PAD_CTS2__KPP_ROW_7 IOMUX_PAD(0x5e8, 0x1a4, 4, 0x98c, 0, NO_PAD_CTRL)
-#define MX35_PAD_CTS2__GPIO3_13 IOMUX_PAD(0x5e8, 0x1a4, 5, 0x8f8, 0, NO_PAD_CTRL)
-#define MX35_PAD_CTS2__AUDMUX_AUD5_RXFS IOMUX_PAD(0x5e8, 0x1a4, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CTS2__UART3_TXD_MUX IOMUX_PAD(0x5e8, 0x1a4, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_RTCK__ARM11P_TOP_RTCK IOMUX_PAD(0x5ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_TCK__SJC_TCK IOMUX_PAD(0x5f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_TMS__SJC_TMS IOMUX_PAD(0x5f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_TDI__SJC_TDI IOMUX_PAD(0x5f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_TDO__SJC_TDO IOMUX_PAD(0x5fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_TRSTB__SJC_TRSTB IOMUX_PAD(0x600, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_DE_B__SJC_DE_B IOMUX_PAD(0x604, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SJC_MOD__SJC_MOD IOMUX_PAD(0x608, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR IOMUX_PAD(0x60c, 0x1a8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR IOMUX_PAD(0x60c, 0x1a8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_USBOTG_PWR__GPIO3_14 IOMUX_PAD(0x60c, 0x1a8, 5, 0x8fc, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC IOMUX_PAD(0x610, 0x1ac, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC IOMUX_PAD(0x610, 0x1ac, 1, 0x9f4, 1, NO_PAD_CTRL)
-#define MX35_PAD_USBOTG_OC__GPIO3_15 IOMUX_PAD(0x610, 0x1ac, 5, 0x900, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD0__IPU_DISPB_DAT_0 IOMUX_PAD(0x614, 0x1b0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD0__GPIO2_0 IOMUX_PAD(0x614, 0x1b0, 5, 0x868, 1, NO_PAD_CTRL)
-#define MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0 IOMUX_PAD(0x614, 0x1b0, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD1__IPU_DISPB_DAT_1 IOMUX_PAD(0x618, 0x1b4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD1__GPIO2_1 IOMUX_PAD(0x618, 0x1b4, 5, 0x894, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1 IOMUX_PAD(0x618, 0x1b4, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD2__IPU_DISPB_DAT_2 IOMUX_PAD(0x61c, 0x1b8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD2__GPIO2_2 IOMUX_PAD(0x61c, 0x1b8, 5, 0x8c0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2 IOMUX_PAD(0x61c, 0x1b8, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD3__IPU_DISPB_DAT_3 IOMUX_PAD(0x620, 0x1bc, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD3__GPIO2_3 IOMUX_PAD(0x620, 0x1bc, 5, 0x8cc, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3 IOMUX_PAD(0x620, 0x1bc, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD4__IPU_DISPB_DAT_4 IOMUX_PAD(0x624, 0x1c0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD4__GPIO2_4 IOMUX_PAD(0x624, 0x1c0, 5, 0x8d0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4 IOMUX_PAD(0x624, 0x1c0, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD5__IPU_DISPB_DAT_5 IOMUX_PAD(0x628, 0x1c4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD5__GPIO2_5 IOMUX_PAD(0x628, 0x1c4, 5, 0x8d4, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5 IOMUX_PAD(0x628, 0x1c4, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD6__IPU_DISPB_DAT_6 IOMUX_PAD(0x62c, 0x1c8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD6__GPIO2_6 IOMUX_PAD(0x62c, 0x1c8, 5, 0x8d8, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6 IOMUX_PAD(0x62c, 0x1c8, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD7__IPU_DISPB_DAT_7 IOMUX_PAD(0x630, 0x1cc, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD7__GPIO2_7 IOMUX_PAD(0x630, 0x1cc, 5, 0x8dc, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7 IOMUX_PAD(0x630, 0x1cc, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD8__IPU_DISPB_DAT_8 IOMUX_PAD(0x634, 0x1d0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD8__GPIO2_8 IOMUX_PAD(0x634, 0x1d0, 5, 0x8e0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8 IOMUX_PAD(0x634, 0x1d0, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD9__IPU_DISPB_DAT_9 IOMUX_PAD(0x638, 0x1d4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD9__GPIO2_9 IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9 IOMUX_PAD(0x638, 0x1d4, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD10__IPU_DISPB_DAT_10 IOMUX_PAD(0x63c, 0x1d8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD10__GPIO2_10 IOMUX_PAD(0x63c, 0x1d8, 5, 0x86c, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10 IOMUX_PAD(0x63c, 0x1d8, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD11__IPU_DISPB_DAT_11 IOMUX_PAD(0x640, 0x1dc, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD11__GPIO2_11 IOMUX_PAD(0x640, 0x1dc, 5, 0x870, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11 IOMUX_PAD(0x640, 0x1dc, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD11__ARM11P_TOP_TRACE_4 IOMUX_PAD(0x640, 0x1dc, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD12__IPU_DISPB_DAT_12 IOMUX_PAD(0x644, 0x1e0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD12__GPIO2_12 IOMUX_PAD(0x644, 0x1e0, 5, 0x874, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12 IOMUX_PAD(0x644, 0x1e0, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD12__ARM11P_TOP_TRACE_5 IOMUX_PAD(0x644, 0x1e0, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD13__IPU_DISPB_DAT_13 IOMUX_PAD(0x648, 0x1e4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD13__GPIO2_13 IOMUX_PAD(0x648, 0x1e4, 5, 0x878, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13 IOMUX_PAD(0x648, 0x1e4, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD13__ARM11P_TOP_TRACE_6 IOMUX_PAD(0x648, 0x1e4, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD14__IPU_DISPB_DAT_14 IOMUX_PAD(0x64c, 0x1e8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD14__GPIO2_14 IOMUX_PAD(0x64c, 0x1e8, 5, 0x87c, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0 IOMUX_PAD(0x64c, 0x1e8, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD14__ARM11P_TOP_TRACE_7 IOMUX_PAD(0x64c, 0x1e8, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD15__IPU_DISPB_DAT_15 IOMUX_PAD(0x650, 0x1ec, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD15__GPIO2_15 IOMUX_PAD(0x650, 0x1ec, 5, 0x880, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1 IOMUX_PAD(0x650, 0x1ec, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD15__ARM11P_TOP_TRACE_8 IOMUX_PAD(0x650, 0x1ec, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD16__IPU_DISPB_DAT_16 IOMUX_PAD(0x654, 0x1f0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD16__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x654, 0x1f0, 2, 0x928, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD16__GPIO2_16 IOMUX_PAD(0x654, 0x1f0, 5, 0x884, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2 IOMUX_PAD(0x654, 0x1f0, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD16__ARM11P_TOP_TRACE_9 IOMUX_PAD(0x654, 0x1f0, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD17__IPU_DISPB_DAT_17 IOMUX_PAD(0x658, 0x1f4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD17__IPU_DISPB_CS2 IOMUX_PAD(0x658, 0x1f4, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD17__GPIO2_17 IOMUX_PAD(0x658, 0x1f4, 5, 0x888, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3 IOMUX_PAD(0x658, 0x1f4, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD17__ARM11P_TOP_TRACE_10 IOMUX_PAD(0x658, 0x1f4, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD18__IPU_DISPB_DAT_18 IOMUX_PAD(0x65c, 0x1f8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD18__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x65c, 0x1f8, 1, 0x924, 1, NO_PAD_CTRL)
-#define MX35_PAD_LD18__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x65c, 0x1f8, 2, 0x928, 1, NO_PAD_CTRL)
-#define MX35_PAD_LD18__ESDHC3_CMD IOMUX_PAD(0x65c, 0x1f8, 3, 0x818, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3 IOMUX_PAD(0x65c, 0x1f8, 4, 0x9b0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD18__GPIO3_24 IOMUX_PAD(0x65c, 0x1f8, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4 IOMUX_PAD(0x65c, 0x1f8, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD18__ARM11P_TOP_TRACE_11 IOMUX_PAD(0x65c, 0x1f8, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD19__IPU_DISPB_DAT_19 IOMUX_PAD(0x660, 0x1fc, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD19__IPU_DISPB_BCLK IOMUX_PAD(0x660, 0x1fc, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD19__IPU_DISPB_CS1 IOMUX_PAD(0x660, 0x1fc, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD19__ESDHC3_CLK IOMUX_PAD(0x660, 0x1fc, 3, 0x814, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD19__USB_TOP_USBOTG_DIR IOMUX_PAD(0x660, 0x1fc, 4, 0x9c4, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD19__GPIO3_25 IOMUX_PAD(0x660, 0x1fc, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5 IOMUX_PAD(0x660, 0x1fc, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD19__ARM11P_TOP_TRACE_12 IOMUX_PAD(0x660, 0x1fc, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD20__IPU_DISPB_DAT_20 IOMUX_PAD(0x664, 0x200, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD20__IPU_DISPB_CS0 IOMUX_PAD(0x664, 0x200, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD20__IPU_DISPB_SD_CLK IOMUX_PAD(0x664, 0x200, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD20__ESDHC3_DAT0 IOMUX_PAD(0x664, 0x200, 3, 0x81c, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD20__GPIO3_26 IOMUX_PAD(0x664, 0x200, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3 IOMUX_PAD(0x664, 0x200, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD20__ARM11P_TOP_TRACE_13 IOMUX_PAD(0x664, 0x200, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD21__IPU_DISPB_DAT_21 IOMUX_PAD(0x668, 0x204, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD21__IPU_DISPB_PAR_RS IOMUX_PAD(0x668, 0x204, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD21__IPU_DISPB_SER_RS IOMUX_PAD(0x668, 0x204, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD21__ESDHC3_DAT1 IOMUX_PAD(0x668, 0x204, 3, 0x820, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD21__USB_TOP_USBOTG_STP IOMUX_PAD(0x668, 0x204, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD21__GPIO3_27 IOMUX_PAD(0x668, 0x204, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL IOMUX_PAD(0x668, 0x204, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD21__ARM11P_TOP_TRACE_14 IOMUX_PAD(0x668, 0x204, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD22__IPU_DISPB_DAT_22 IOMUX_PAD(0x66c, 0x208, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD22__IPU_DISPB_WR IOMUX_PAD(0x66c, 0x208, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD22__IPU_DISPB_SD_D_I IOMUX_PAD(0x66c, 0x208, 2, 0x92c, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD22__ESDHC3_DAT2 IOMUX_PAD(0x66c, 0x208, 3, 0x824, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD22__USB_TOP_USBOTG_NXT IOMUX_PAD(0x66c, 0x208, 4, 0x9c8, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD22__GPIO3_28 IOMUX_PAD(0x66c, 0x208, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR IOMUX_PAD(0x66c, 0x208, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD22__ARM11P_TOP_TRCTL IOMUX_PAD(0x66c, 0x208, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD23__IPU_DISPB_DAT_23 IOMUX_PAD(0x670, 0x20c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD23__IPU_DISPB_RD IOMUX_PAD(0x670, 0x20c, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD23__IPU_DISPB_SD_D_IO IOMUX_PAD(0x670, 0x20c, 2, 0x92c, 1, NO_PAD_CTRL)
-#define MX35_PAD_LD23__ESDHC3_DAT3 IOMUX_PAD(0x670, 0x20c, 3, 0x828, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7 IOMUX_PAD(0x670, 0x20c, 4, 0x9c0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD23__GPIO3_29 IOMUX_PAD(0x670, 0x20c, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS IOMUX_PAD(0x670, 0x20c, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD23__ARM11P_TOP_TRCLK IOMUX_PAD(0x670, 0x20c, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC IOMUX_PAD(0x674, 0x210, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO IOMUX_PAD(0x674, 0x210, 2, 0x92c, 2, NO_PAD_CTRL)
-#define MX35_PAD_D3_HSYNC__GPIO3_30 IOMUX_PAD(0x674, 0x210, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE IOMUX_PAD(0x674, 0x210, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15 IOMUX_PAD(0x674, 0x210, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK IOMUX_PAD(0x678, 0x214, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK IOMUX_PAD(0x678, 0x214, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_FPSHIFT__GPIO3_31 IOMUX_PAD(0x678, 0x214, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0 IOMUX_PAD(0x678, 0x214, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16 IOMUX_PAD(0x678, 0x214, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY IOMUX_PAD(0x67c, 0x218, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O IOMUX_PAD(0x67c, 0x218, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_DRDY__GPIO1_0 IOMUX_PAD(0x67c, 0x218, 5, 0x82c, 2, NO_PAD_CTRL)
-#define MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1 IOMUX_PAD(0x67c, 0x218, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17 IOMUX_PAD(0x67c, 0x218, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CONTRAST__IPU_DISPB_CONTR IOMUX_PAD(0x680, 0x21c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CONTRAST__GPIO1_1 IOMUX_PAD(0x680, 0x21c, 5, 0x838, 2, NO_PAD_CTRL)
-#define MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2 IOMUX_PAD(0x680, 0x21c, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18 IOMUX_PAD(0x680, 0x21c, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC IOMUX_PAD(0x684, 0x220, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_VSYNC__IPU_DISPB_CS1 IOMUX_PAD(0x684, 0x220, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_VSYNC__GPIO1_2 IOMUX_PAD(0x684, 0x220, 5, 0x848, 1, NO_PAD_CTRL)
-#define MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD IOMUX_PAD(0x684, 0x220, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19 IOMUX_PAD(0x684, 0x220, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D3_REV__IPU_DISPB_D3_REV IOMUX_PAD(0x688, 0x224, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_REV__IPU_DISPB_SER_RS IOMUX_PAD(0x688, 0x224, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_REV__GPIO1_3 IOMUX_PAD(0x688, 0x224, 5, 0x84c, 1, NO_PAD_CTRL)
-#define MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB IOMUX_PAD(0x688, 0x224, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20 IOMUX_PAD(0x688, 0x224, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS IOMUX_PAD(0x68c, 0x228, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_CLS__IPU_DISPB_CS2 IOMUX_PAD(0x68c, 0x228, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_CLS__GPIO1_4 IOMUX_PAD(0x68c, 0x228, 5, 0x850, 2, NO_PAD_CTRL)
-#define MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0 IOMUX_PAD(0x68c, 0x228, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21 IOMUX_PAD(0x68c, 0x228, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL IOMUX_PAD(0x690, 0x22c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x690, 0x22c, 2, 0x928, 2, NO_PAD_CTRL)
-#define MX35_PAD_D3_SPL__GPIO1_5 IOMUX_PAD(0x690, 0x22c, 5, 0x854, 2, NO_PAD_CTRL)
-#define MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1 IOMUX_PAD(0x690, 0x22c, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22 IOMUX_PAD(0x690, 0x22c, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD1_CMD__ESDHC1_CMD IOMUX_PAD(0x694, 0x230, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_CMD__MSHC_SCLK IOMUX_PAD(0x694, 0x230, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x694, 0x230, 3, 0x924, 2, NO_PAD_CTRL)
-#define MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4 IOMUX_PAD(0x694, 0x230, 4, 0x9b4, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_CMD__GPIO1_6 IOMUX_PAD(0x694, 0x230, 5, 0x858, 2, NO_PAD_CTRL)
-#define MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL IOMUX_PAD(0x694, 0x230, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD1_CLK__ESDHC1_CLK IOMUX_PAD(0x698, 0x234, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_CLK__MSHC_BS IOMUX_PAD(0x698, 0x234, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_CLK__IPU_DISPB_BCLK IOMUX_PAD(0x698, 0x234, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5 IOMUX_PAD(0x698, 0x234, 4, 0x9b8, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_CLK__GPIO1_7 IOMUX_PAD(0x698, 0x234, 5, 0x85c, 2, NO_PAD_CTRL)
-#define MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK IOMUX_PAD(0x698, 0x234, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD1_DATA0__ESDHC1_DAT0 IOMUX_PAD(0x69c, 0x238, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA0__MSHC_DATA_0 IOMUX_PAD(0x69c, 0x238, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA0__IPU_DISPB_CS0 IOMUX_PAD(0x69c, 0x238, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6 IOMUX_PAD(0x69c, 0x238, 4, 0x9bc, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA0__GPIO1_8 IOMUX_PAD(0x69c, 0x238, 5, 0x860, 2, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23 IOMUX_PAD(0x69c, 0x238, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD1_DATA1__ESDHC1_DAT1 IOMUX_PAD(0x6a0, 0x23c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA1__MSHC_DATA_1 IOMUX_PAD(0x6a0, 0x23c, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS IOMUX_PAD(0x6a0, 0x23c, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0 IOMUX_PAD(0x6a0, 0x23c, 4, 0x9a4, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA1__GPIO1_9 IOMUX_PAD(0x6a0, 0x23c, 5, 0x864, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24 IOMUX_PAD(0x6a0, 0x23c, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD1_DATA2__ESDHC1_DAT2 IOMUX_PAD(0x6a4, 0x240, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA2__MSHC_DATA_2 IOMUX_PAD(0x6a4, 0x240, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA2__IPU_DISPB_WR IOMUX_PAD(0x6a4, 0x240, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1 IOMUX_PAD(0x6a4, 0x240, 4, 0x9a8, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA2__GPIO1_10 IOMUX_PAD(0x6a4, 0x240, 5, 0x830, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25 IOMUX_PAD(0x6a4, 0x240, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD1_DATA3__ESDHC1_DAT3 IOMUX_PAD(0x6a8, 0x244, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA3__MSHC_DATA_3 IOMUX_PAD(0x6a8, 0x244, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA3__IPU_DISPB_RD IOMUX_PAD(0x6a8, 0x244, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2 IOMUX_PAD(0x6a8, 0x244, 4, 0x9ac, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA3__GPIO1_11 IOMUX_PAD(0x6a8, 0x244, 5, 0x834, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26 IOMUX_PAD(0x6a8, 0x244, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD2_CMD__ESDHC2_CMD IOMUX_PAD(0x6ac, 0x248, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CMD__I2C3_SCL IOMUX_PAD(0x6ac, 0x248, 1, 0x91c, 2, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CMD__ESDHC1_DAT4 IOMUX_PAD(0x6ac, 0x248, 2, 0x804, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CMD__IPU_CSI_D_2 IOMUX_PAD(0x6ac, 0x248, 3, 0x938, 2, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4 IOMUX_PAD(0x6ac, 0x248, 4, 0x9dc, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CMD__GPIO2_0 IOMUX_PAD(0x6ac, 0x248, 5, 0x868, 2, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x6ac, 0x248, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x6ac, 0x248, 7, 0x928, 3, NO_PAD_CTRL)
-
-#define MX35_PAD_SD2_CLK__ESDHC2_CLK IOMUX_PAD(0x6b0, 0x24c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CLK__I2C3_SDA IOMUX_PAD(0x6b0, 0x24c, 1, 0x920, 2, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CLK__ESDHC1_DAT5 IOMUX_PAD(0x6b0, 0x24c, 2, 0x808, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CLK__IPU_CSI_D_3 IOMUX_PAD(0x6b0, 0x24c, 3, 0x93c, 2, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5 IOMUX_PAD(0x6b0, 0x24c, 4, 0x9e0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CLK__GPIO2_1 IOMUX_PAD(0x6b0, 0x24c, 5, 0x894, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1 IOMUX_PAD(0x6b0, 0x24c, 6, 0x998, 2, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CLK__IPU_DISPB_CS2 IOMUX_PAD(0x6b0, 0x24c, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD2_DATA0__ESDHC2_DAT0 IOMUX_PAD(0x6b4, 0x250, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA0__UART3_RXD_MUX IOMUX_PAD(0x6b4, 0x250, 1, 0x9a0, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA0__ESDHC1_DAT6 IOMUX_PAD(0x6b4, 0x250, 2, 0x80c, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA0__IPU_CSI_D_4 IOMUX_PAD(0x6b4, 0x250, 3, 0x940, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6 IOMUX_PAD(0x6b4, 0x250, 4, 0x9e4, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA0__GPIO2_2 IOMUX_PAD(0x6b4, 0x250, 5, 0x8c0, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x6b4, 0x250, 6, 0x994, 3, NO_PAD_CTRL)
-
-#define MX35_PAD_SD2_DATA1__ESDHC2_DAT1 IOMUX_PAD(0x6b8, 0x254, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA1__UART3_TXD_MUX IOMUX_PAD(0x6b8, 0x254, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA1__ESDHC1_DAT7 IOMUX_PAD(0x6b8, 0x254, 2, 0x810, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA1__IPU_CSI_D_5 IOMUX_PAD(0x6b8, 0x254, 3, 0x944, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0 IOMUX_PAD(0x6b8, 0x254, 4, 0x9cc, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA1__GPIO2_3 IOMUX_PAD(0x6b8, 0x254, 5, 0x8cc, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_SD2_DATA2__ESDHC2_DAT2 IOMUX_PAD(0x6bc, 0x258, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA2__UART3_RTS IOMUX_PAD(0x6bc, 0x258, 1, 0x99c, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA2__CAN1_RXCAN IOMUX_PAD(0x6bc, 0x258, 2, 0x7c8, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA2__IPU_CSI_D_6 IOMUX_PAD(0x6bc, 0x258, 3, 0x948, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1 IOMUX_PAD(0x6bc, 0x258, 4, 0x9d0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA2__GPIO2_4 IOMUX_PAD(0x6bc, 0x258, 5, 0x8d0, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_SD2_DATA3__ESDHC2_DAT3 IOMUX_PAD(0x6c0, 0x25c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA3__UART3_CTS IOMUX_PAD(0x6c0, 0x25c, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA3__CAN1_TXCAN IOMUX_PAD(0x6c0, 0x25c, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA3__IPU_CSI_D_7 IOMUX_PAD(0x6c0, 0x25c, 3, 0x94c, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2 IOMUX_PAD(0x6c0, 0x25c, 4, 0x9d4, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA3__GPIO2_5 IOMUX_PAD(0x6c0, 0x25c, 5, 0x8d4, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_CS0__ATA_CS0 IOMUX_PAD(0x6c4, 0x260, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_CS0__CSPI1_SS3 IOMUX_PAD(0x6c4, 0x260, 1, 0x7dc, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_CS0__IPU_DISPB_CS1 IOMUX_PAD(0x6c4, 0x260, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_CS0__GPIO2_6 IOMUX_PAD(0x6c4, 0x260, 5, 0x8d8, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_CS0__IPU_DIAGB_0 IOMUX_PAD(0x6c4, 0x260, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0 IOMUX_PAD(0x6c4, 0x260, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_CS1__ATA_CS1 IOMUX_PAD(0x6c8, 0x264, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_CS1__IPU_DISPB_CS2 IOMUX_PAD(0x6c8, 0x264, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_CS1__CSPI2_SS0 IOMUX_PAD(0x6c8, 0x264, 4, 0x7f0, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_CS1__GPIO2_7 IOMUX_PAD(0x6c8, 0x264, 5, 0x8dc, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_CS1__IPU_DIAGB_1 IOMUX_PAD(0x6c8, 0x264, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1 IOMUX_PAD(0x6c8, 0x264, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DIOR__ATA_DIOR IOMUX_PAD(0x6cc, 0x268, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOR__ESDHC3_DAT0 IOMUX_PAD(0x6cc, 0x268, 1, 0x81c, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR IOMUX_PAD(0x6cc, 0x268, 2, 0x9c4, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOR__IPU_DISPB_BE0 IOMUX_PAD(0x6cc, 0x268, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOR__CSPI2_SS1 IOMUX_PAD(0x6cc, 0x268, 4, 0x7f4, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOR__GPIO2_8 IOMUX_PAD(0x6cc, 0x268, 5, 0x8e0, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOR__IPU_DIAGB_2 IOMUX_PAD(0x6cc, 0x268, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2 IOMUX_PAD(0x6cc, 0x268, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DIOW__ATA_DIOW IOMUX_PAD(0x6d0, 0x26c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOW__ESDHC3_DAT1 IOMUX_PAD(0x6d0, 0x26c, 1, 0x820, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP IOMUX_PAD(0x6d0, 0x26c, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOW__IPU_DISPB_BE1 IOMUX_PAD(0x6d0, 0x26c, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOW__CSPI2_MOSI IOMUX_PAD(0x6d0, 0x26c, 4, 0x7ec, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOW__GPIO2_9 IOMUX_PAD(0x6d0, 0x26c, 5, 0x8e4, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOW__IPU_DIAGB_3 IOMUX_PAD(0x6d0, 0x26c, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3 IOMUX_PAD(0x6d0, 0x26c, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DMACK__ATA_DMACK IOMUX_PAD(0x6d4, 0x270, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMACK__ESDHC3_DAT2 IOMUX_PAD(0x6d4, 0x270, 1, 0x824, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT IOMUX_PAD(0x6d4, 0x270, 2, 0x9c8, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMACK__CSPI2_MISO IOMUX_PAD(0x6d4, 0x270, 4, 0x7e8, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMACK__GPIO2_10 IOMUX_PAD(0x6d4, 0x270, 5, 0x86c, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMACK__IPU_DIAGB_4 IOMUX_PAD(0x6d4, 0x270, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0 IOMUX_PAD(0x6d4, 0x270, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_RESET_B__ATA_RESET_B IOMUX_PAD(0x6d8, 0x274, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_RESET_B__ESDHC3_DAT3 IOMUX_PAD(0x6d8, 0x274, 1, 0x828, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0 IOMUX_PAD(0x6d8, 0x274, 2, 0x9a4, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O IOMUX_PAD(0x6d8, 0x274, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_RESET_B__CSPI2_RDY IOMUX_PAD(0x6d8, 0x274, 4, 0x7e4, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_RESET_B__GPIO2_11 IOMUX_PAD(0x6d8, 0x274, 5, 0x870, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_RESET_B__IPU_DIAGB_5 IOMUX_PAD(0x6d8, 0x274, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1 IOMUX_PAD(0x6d8, 0x274, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_IORDY__ATA_IORDY IOMUX_PAD(0x6dc, 0x278, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_IORDY__ESDHC3_DAT4 IOMUX_PAD(0x6dc, 0x278, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1 IOMUX_PAD(0x6dc, 0x278, 2, 0x9a8, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO IOMUX_PAD(0x6dc, 0x278, 3, 0x92c, 3, NO_PAD_CTRL)
-#define MX35_PAD_ATA_IORDY__ESDHC2_DAT4 IOMUX_PAD(0x6dc, 0x278, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_IORDY__GPIO2_12 IOMUX_PAD(0x6dc, 0x278, 5, 0x874, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_IORDY__IPU_DIAGB_6 IOMUX_PAD(0x6dc, 0x278, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2 IOMUX_PAD(0x6dc, 0x278, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA0__ATA_DATA_0 IOMUX_PAD(0x6e0, 0x27c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA0__ESDHC3_DAT5 IOMUX_PAD(0x6e0, 0x27c, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2 IOMUX_PAD(0x6e0, 0x27c, 2, 0x9ac, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x6e0, 0x27c, 3, 0x928, 4, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA0__ESDHC2_DAT5 IOMUX_PAD(0x6e0, 0x27c, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA0__GPIO2_13 IOMUX_PAD(0x6e0, 0x27c, 5, 0x878, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA0__IPU_DIAGB_7 IOMUX_PAD(0x6e0, 0x27c, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3 IOMUX_PAD(0x6e0, 0x27c, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA1__ATA_DATA_1 IOMUX_PAD(0x6e4, 0x280, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA1__ESDHC3_DAT6 IOMUX_PAD(0x6e4, 0x280, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3 IOMUX_PAD(0x6e4, 0x280, 2, 0x9b0, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK IOMUX_PAD(0x6e4, 0x280, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA1__ESDHC2_DAT6 IOMUX_PAD(0x6e4, 0x280, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA1__GPIO2_14 IOMUX_PAD(0x6e4, 0x280, 5, 0x87c, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA1__IPU_DIAGB_8 IOMUX_PAD(0x6e4, 0x280, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27 IOMUX_PAD(0x6e4, 0x280, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA2__ATA_DATA_2 IOMUX_PAD(0x6e8, 0x284, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA2__ESDHC3_DAT7 IOMUX_PAD(0x6e8, 0x284, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4 IOMUX_PAD(0x6e8, 0x284, 2, 0x9b4, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS IOMUX_PAD(0x6e8, 0x284, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA2__ESDHC2_DAT7 IOMUX_PAD(0x6e8, 0x284, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA2__GPIO2_15 IOMUX_PAD(0x6e8, 0x284, 5, 0x880, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA2__IPU_DIAGB_9 IOMUX_PAD(0x6e8, 0x284, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28 IOMUX_PAD(0x6e8, 0x284, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA3__ATA_DATA_3 IOMUX_PAD(0x6ec, 0x288, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA3__ESDHC3_CLK IOMUX_PAD(0x6ec, 0x288, 1, 0x814, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5 IOMUX_PAD(0x6ec, 0x288, 2, 0x9b8, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA3__CSPI2_SCLK IOMUX_PAD(0x6ec, 0x288, 4, 0x7e0, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA3__GPIO2_16 IOMUX_PAD(0x6ec, 0x288, 5, 0x884, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA3__IPU_DIAGB_10 IOMUX_PAD(0x6ec, 0x288, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29 IOMUX_PAD(0x6ec, 0x288, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA4__ATA_DATA_4 IOMUX_PAD(0x6f0, 0x28c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA4__ESDHC3_CMD IOMUX_PAD(0x6f0, 0x28c, 1, 0x818, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6 IOMUX_PAD(0x6f0, 0x28c, 2, 0x9bc, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA4__GPIO2_17 IOMUX_PAD(0x6f0, 0x28c, 5, 0x888, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA4__IPU_DIAGB_11 IOMUX_PAD(0x6f0, 0x28c, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30 IOMUX_PAD(0x6f0, 0x28c, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA5__ATA_DATA_5 IOMUX_PAD(0x6f4, 0x290, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7 IOMUX_PAD(0x6f4, 0x290, 2, 0x9c0, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA5__GPIO2_18 IOMUX_PAD(0x6f4, 0x290, 5, 0x88c, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA5__IPU_DIAGB_12 IOMUX_PAD(0x6f4, 0x290, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31 IOMUX_PAD(0x6f4, 0x290, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA6__ATA_DATA_6 IOMUX_PAD(0x6f8, 0x294, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA6__CAN1_TXCAN IOMUX_PAD(0x6f8, 0x294, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA6__UART1_DTR IOMUX_PAD(0x6f8, 0x294, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD IOMUX_PAD(0x6f8, 0x294, 3, 0x7b4, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA6__GPIO2_19 IOMUX_PAD(0x6f8, 0x294, 5, 0x890, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA6__IPU_DIAGB_13 IOMUX_PAD(0x6f8, 0x294, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA7__ATA_DATA_7 IOMUX_PAD(0x6fc, 0x298, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA7__CAN1_RXCAN IOMUX_PAD(0x6fc, 0x298, 1, 0x7c8, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA7__UART1_DSR IOMUX_PAD(0x6fc, 0x298, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD IOMUX_PAD(0x6fc, 0x298, 3, 0x7b0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA7__GPIO2_20 IOMUX_PAD(0x6fc, 0x298, 5, 0x898, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA7__IPU_DIAGB_14 IOMUX_PAD(0x6fc, 0x298, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA8__ATA_DATA_8 IOMUX_PAD(0x700, 0x29c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA8__UART3_RTS IOMUX_PAD(0x700, 0x29c, 1, 0x99c, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA8__UART1_RI IOMUX_PAD(0x700, 0x29c, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC IOMUX_PAD(0x700, 0x29c, 3, 0x7c0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA8__GPIO2_21 IOMUX_PAD(0x700, 0x29c, 5, 0x89c, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA8__IPU_DIAGB_15 IOMUX_PAD(0x700, 0x29c, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA9__ATA_DATA_9 IOMUX_PAD(0x704, 0x2a0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA9__UART3_CTS IOMUX_PAD(0x704, 0x2a0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA9__UART1_DCD IOMUX_PAD(0x704, 0x2a0, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS IOMUX_PAD(0x704, 0x2a0, 3, 0x7c4, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA9__GPIO2_22 IOMUX_PAD(0x704, 0x2a0, 5, 0x8a0, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA9__IPU_DIAGB_16 IOMUX_PAD(0x704, 0x2a0, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA10__ATA_DATA_10 IOMUX_PAD(0x708, 0x2a4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA10__UART3_RXD_MUX IOMUX_PAD(0x708, 0x2a4, 1, 0x9a0, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC IOMUX_PAD(0x708, 0x2a4, 3, 0x7b8, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA10__GPIO2_23 IOMUX_PAD(0x708, 0x2a4, 5, 0x8a4, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA10__IPU_DIAGB_17 IOMUX_PAD(0x708, 0x2a4, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA11__ATA_DATA_11 IOMUX_PAD(0x70c, 0x2a8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA11__UART3_TXD_MUX IOMUX_PAD(0x70c, 0x2a8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS IOMUX_PAD(0x70c, 0x2a8, 3, 0x7bc, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA11__GPIO2_24 IOMUX_PAD(0x70c, 0x2a8, 5, 0x8a8, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA11__IPU_DIAGB_18 IOMUX_PAD(0x70c, 0x2a8, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA12__ATA_DATA_12 IOMUX_PAD(0x710, 0x2ac, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA12__I2C3_SCL IOMUX_PAD(0x710, 0x2ac, 1, 0x91c, 3, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA12__GPIO2_25 IOMUX_PAD(0x710, 0x2ac, 5, 0x8ac, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA12__IPU_DIAGB_19 IOMUX_PAD(0x710, 0x2ac, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA13__ATA_DATA_13 IOMUX_PAD(0x714, 0x2b0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA13__I2C3_SDA IOMUX_PAD(0x714, 0x2b0, 1, 0x920, 3, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA13__GPIO2_26 IOMUX_PAD(0x714, 0x2b0, 5, 0x8b0, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA13__IPU_DIAGB_20 IOMUX_PAD(0x714, 0x2b0, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA14__ATA_DATA_14 IOMUX_PAD(0x718, 0x2b4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA14__IPU_CSI_D_0 IOMUX_PAD(0x718, 0x2b4, 1, 0x930, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA14__KPP_ROW_0 IOMUX_PAD(0x718, 0x2b4, 3, 0x970, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA14__GPIO2_27 IOMUX_PAD(0x718, 0x2b4, 5, 0x8b4, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA14__IPU_DIAGB_21 IOMUX_PAD(0x718, 0x2b4, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA15__ATA_DATA_15 IOMUX_PAD(0x71c, 0x2b8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA15__IPU_CSI_D_1 IOMUX_PAD(0x71c, 0x2b8, 1, 0x934, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA15__KPP_ROW_1 IOMUX_PAD(0x71c, 0x2b8, 3, 0x974, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA15__GPIO2_28 IOMUX_PAD(0x71c, 0x2b8, 5, 0x8b8, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA15__IPU_DIAGB_22 IOMUX_PAD(0x71c, 0x2b8, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_INTRQ__ATA_INTRQ IOMUX_PAD(0x720, 0x2bc, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_INTRQ__IPU_CSI_D_2 IOMUX_PAD(0x720, 0x2bc, 1, 0x938, 3, NO_PAD_CTRL)
-#define MX35_PAD_ATA_INTRQ__KPP_ROW_2 IOMUX_PAD(0x720, 0x2bc, 3, 0x978, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_INTRQ__GPIO2_29 IOMUX_PAD(0x720, 0x2bc, 5, 0x8bc, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_INTRQ__IPU_DIAGB_23 IOMUX_PAD(0x720, 0x2bc, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN IOMUX_PAD(0x724, 0x2c0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3 IOMUX_PAD(0x724, 0x2c0, 1, 0x93c, 3, NO_PAD_CTRL)
-#define MX35_PAD_ATA_BUFF_EN__KPP_ROW_3 IOMUX_PAD(0x724, 0x2c0, 3, 0x97c, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_BUFF_EN__GPIO2_30 IOMUX_PAD(0x724, 0x2c0, 5, 0x8c4, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24 IOMUX_PAD(0x724, 0x2c0, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DMARQ__ATA_DMARQ IOMUX_PAD(0x728, 0x2c4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMARQ__IPU_CSI_D_4 IOMUX_PAD(0x728, 0x2c4, 1, 0x940, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMARQ__KPP_COL_0 IOMUX_PAD(0x728, 0x2c4, 3, 0x950, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMARQ__GPIO2_31 IOMUX_PAD(0x728, 0x2c4, 5, 0x8c8, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMARQ__IPU_DIAGB_25 IOMUX_PAD(0x728, 0x2c4, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4 IOMUX_PAD(0x728, 0x2c4, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DA0__ATA_DA_0 IOMUX_PAD(0x72c, 0x2c8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA0__IPU_CSI_D_5 IOMUX_PAD(0x72c, 0x2c8, 1, 0x944, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA0__KPP_COL_1 IOMUX_PAD(0x72c, 0x2c8, 3, 0x954, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA0__GPIO3_0 IOMUX_PAD(0x72c, 0x2c8, 5, 0x8e8, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA0__IPU_DIAGB_26 IOMUX_PAD(0x72c, 0x2c8, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5 IOMUX_PAD(0x72c, 0x2c8, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DA1__ATA_DA_1 IOMUX_PAD(0x730, 0x2cc, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA1__IPU_CSI_D_6 IOMUX_PAD(0x730, 0x2cc, 1, 0x948, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA1__KPP_COL_2 IOMUX_PAD(0x730, 0x2cc, 3, 0x958, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA1__GPIO3_1 IOMUX_PAD(0x730, 0x2cc, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA1__IPU_DIAGB_27 IOMUX_PAD(0x730, 0x2cc, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6 IOMUX_PAD(0x730, 0x2cc, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DA2__ATA_DA_2 IOMUX_PAD(0x734, 0x2d0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA2__IPU_CSI_D_7 IOMUX_PAD(0x734, 0x2d0, 1, 0x94c, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA2__KPP_COL_3 IOMUX_PAD(0x734, 0x2d0, 3, 0x95c, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA2__GPIO3_2 IOMUX_PAD(0x734, 0x2d0, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA2__IPU_DIAGB_28 IOMUX_PAD(0x734, 0x2d0, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7 IOMUX_PAD(0x734, 0x2d0, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_MLB_CLK__MLB_MLBCLK IOMUX_PAD(0x738, 0x2d4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_MLB_CLK__GPIO3_3 IOMUX_PAD(0x738, 0x2d4, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_MLB_DAT__MLB_MLBDAT IOMUX_PAD(0x73c, 0x2d8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_MLB_DAT__GPIO3_4 IOMUX_PAD(0x73c, 0x2d8, 5, 0x904, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_MLB_SIG__MLB_MLBSIG IOMUX_PAD(0x740, 0x2dc, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_MLB_SIG__GPIO3_5 IOMUX_PAD(0x740, 0x2dc, 5, 0x908, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_TX_CLK__FEC_TX_CLK IOMUX_PAD(0x744, 0x2e0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4 IOMUX_PAD(0x744, 0x2e0, 1, 0x804, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX IOMUX_PAD(0x744, 0x2e0, 2, 0x9a0, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR IOMUX_PAD(0x744, 0x2e0, 3, 0x9ec, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_CLK__CSPI2_MOSI IOMUX_PAD(0x744, 0x2e0, 4, 0x7ec, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_CLK__GPIO3_6 IOMUX_PAD(0x744, 0x2e0, 5, 0x90c, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x744, 0x2e0, 6, 0x928, 5, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0 IOMUX_PAD(0x744, 0x2e0, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_RX_CLK__FEC_RX_CLK IOMUX_PAD(0x748, 0x2e4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5 IOMUX_PAD(0x748, 0x2e4, 1, 0x808, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX IOMUX_PAD(0x748, 0x2e4, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP IOMUX_PAD(0x748, 0x2e4, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_CLK__CSPI2_MISO IOMUX_PAD(0x748, 0x2e4, 4, 0x7e8, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_CLK__GPIO3_7 IOMUX_PAD(0x748, 0x2e4, 5, 0x910, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I IOMUX_PAD(0x748, 0x2e4, 6, 0x92c, 4, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1 IOMUX_PAD(0x748, 0x2e4, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_RX_DV__FEC_RX_DV IOMUX_PAD(0x74c, 0x2e8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_DV__ESDHC1_DAT6 IOMUX_PAD(0x74c, 0x2e8, 1, 0x80c, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_DV__UART3_RTS IOMUX_PAD(0x74c, 0x2e8, 2, 0x99c, 2, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT IOMUX_PAD(0x74c, 0x2e8, 3, 0x9f0, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_DV__CSPI2_SCLK IOMUX_PAD(0x74c, 0x2e8, 4, 0x7e0, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_DV__GPIO3_8 IOMUX_PAD(0x74c, 0x2e8, 5, 0x914, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK IOMUX_PAD(0x74c, 0x2e8, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2 IOMUX_PAD(0x74c, 0x2e8, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_COL__FEC_COL IOMUX_PAD(0x750, 0x2ec, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_COL__ESDHC1_DAT7 IOMUX_PAD(0x750, 0x2ec, 1, 0x810, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_COL__UART3_CTS IOMUX_PAD(0x750, 0x2ec, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0 IOMUX_PAD(0x750, 0x2ec, 3, 0x9cc, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_COL__CSPI2_RDY IOMUX_PAD(0x750, 0x2ec, 4, 0x7e4, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_COL__GPIO3_9 IOMUX_PAD(0x750, 0x2ec, 5, 0x918, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_COL__IPU_DISPB_SER_RS IOMUX_PAD(0x750, 0x2ec, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3 IOMUX_PAD(0x750, 0x2ec, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_RDATA0__FEC_RDATA_0 IOMUX_PAD(0x754, 0x2f0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA0__PWM_PWMO IOMUX_PAD(0x754, 0x2f0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA0__UART3_DTR IOMUX_PAD(0x754, 0x2f0, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1 IOMUX_PAD(0x754, 0x2f0, 3, 0x9d0, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA0__CSPI2_SS0 IOMUX_PAD(0x754, 0x2f0, 4, 0x7f0, 2, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA0__GPIO3_10 IOMUX_PAD(0x754, 0x2f0, 5, 0x8ec, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1 IOMUX_PAD(0x754, 0x2f0, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4 IOMUX_PAD(0x754, 0x2f0, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_TDATA0__FEC_TDATA_0 IOMUX_PAD(0x758, 0x2f4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x758, 0x2f4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA0__UART3_DSR IOMUX_PAD(0x758, 0x2f4, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2 IOMUX_PAD(0x758, 0x2f4, 3, 0x9d4, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA0__CSPI2_SS1 IOMUX_PAD(0x758, 0x2f4, 4, 0x7f4, 2, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA0__GPIO3_11 IOMUX_PAD(0x758, 0x2f4, 5, 0x8f0, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0 IOMUX_PAD(0x758, 0x2f4, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5 IOMUX_PAD(0x758, 0x2f4, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x75c, 0x2f8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1 IOMUX_PAD(0x75c, 0x2f8, 1, 0x998, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_EN__UART3_RI IOMUX_PAD(0x75c, 0x2f8, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3 IOMUX_PAD(0x75c, 0x2f8, 3, 0x9d8, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_EN__GPIO3_12 IOMUX_PAD(0x75c, 0x2f8, 5, 0x8f4, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS IOMUX_PAD(0x75c, 0x2f8, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6 IOMUX_PAD(0x75c, 0x2f8, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x760, 0x2fc, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDC__CAN2_TXCAN IOMUX_PAD(0x760, 0x2fc, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDC__UART3_DCD IOMUX_PAD(0x760, 0x2fc, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4 IOMUX_PAD(0x760, 0x2fc, 3, 0x9dc, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDC__GPIO3_13 IOMUX_PAD(0x760, 0x2fc, 5, 0x8f8, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDC__IPU_DISPB_WR IOMUX_PAD(0x760, 0x2fc, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7 IOMUX_PAD(0x760, 0x2fc, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x764, 0x300, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDIO__CAN2_RXCAN IOMUX_PAD(0x764, 0x300, 1, 0x7cc, 2, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5 IOMUX_PAD(0x764, 0x300, 3, 0x9e0, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDIO__GPIO3_14 IOMUX_PAD(0x764, 0x300, 5, 0x8fc, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDIO__IPU_DISPB_RD IOMUX_PAD(0x764, 0x300, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8 IOMUX_PAD(0x764, 0x300, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_TX_ERR__FEC_TX_ERR IOMUX_PAD(0x768, 0x304, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_ERR__OWIRE_LINE IOMUX_PAD(0x768, 0x304, 1, 0x990, 2, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x768, 0x304, 2, 0x994, 4, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6 IOMUX_PAD(0x768, 0x304, 3, 0x9e4, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_ERR__GPIO3_15 IOMUX_PAD(0x768, 0x304, 5, 0x900, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x768, 0x304, 6, 0x924, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9 IOMUX_PAD(0x768, 0x304, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_RX_ERR__FEC_RX_ERR IOMUX_PAD(0x76c, 0x308, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0 IOMUX_PAD(0x76c, 0x308, 1, 0x930, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7 IOMUX_PAD(0x76c, 0x308, 3, 0x9e8, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_ERR__KPP_COL_4 IOMUX_PAD(0x76c, 0x308, 4, 0x960, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_ERR__GPIO3_16 IOMUX_PAD(0x76c, 0x308, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO IOMUX_PAD(0x76c, 0x308, 6, 0x92c, 5, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_CRS__FEC_CRS IOMUX_PAD(0x770, 0x30c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_CRS__IPU_CSI_D_1 IOMUX_PAD(0x770, 0x30c, 1, 0x934, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR IOMUX_PAD(0x770, 0x30c, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_CRS__KPP_COL_5 IOMUX_PAD(0x770, 0x30c, 4, 0x964, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_CRS__GPIO3_17 IOMUX_PAD(0x770, 0x30c, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_CRS__IPU_FLASH_STROBE IOMUX_PAD(0x770, 0x30c, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_RDATA1__FEC_RDATA_1 IOMUX_PAD(0x774, 0x310, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA1__IPU_CSI_D_2 IOMUX_PAD(0x774, 0x310, 1, 0x938, 4, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC IOMUX_PAD(0x774, 0x310, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC IOMUX_PAD(0x774, 0x310, 3, 0x9f4, 2, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA1__KPP_COL_6 IOMUX_PAD(0x774, 0x310, 4, 0x968, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA1__GPIO3_18 IOMUX_PAD(0x774, 0x310, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0 IOMUX_PAD(0x774, 0x310, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_TDATA1__FEC_TDATA_1 IOMUX_PAD(0x778, 0x314, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA1__IPU_CSI_D_3 IOMUX_PAD(0x778, 0x314, 1, 0x93c, 4, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS IOMUX_PAD(0x778, 0x314, 2, 0x7bc, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA1__KPP_COL_7 IOMUX_PAD(0x778, 0x314, 4, 0x96c, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA1__GPIO3_19 IOMUX_PAD(0x778, 0x314, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1 IOMUX_PAD(0x778, 0x314, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_RDATA2__FEC_RDATA_2 IOMUX_PAD(0x77c, 0x318, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA2__IPU_CSI_D_4 IOMUX_PAD(0x77c, 0x318, 1, 0x940, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD IOMUX_PAD(0x77c, 0x318, 2, 0x7b4, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA2__KPP_ROW_4 IOMUX_PAD(0x77c, 0x318, 4, 0x980, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA2__GPIO3_20 IOMUX_PAD(0x77c, 0x318, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_TDATA2__FEC_TDATA_2 IOMUX_PAD(0x780, 0x31c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA2__IPU_CSI_D_5 IOMUX_PAD(0x780, 0x31c, 1, 0x944, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD IOMUX_PAD(0x780, 0x31c, 2, 0x7b0, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA2__KPP_ROW_5 IOMUX_PAD(0x780, 0x31c, 4, 0x984, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA2__GPIO3_21 IOMUX_PAD(0x780, 0x31c, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_RDATA3__FEC_RDATA_3 IOMUX_PAD(0x784, 0x320, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA3__IPU_CSI_D_6 IOMUX_PAD(0x784, 0x320, 1, 0x948, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC IOMUX_PAD(0x784, 0x320, 2, 0x7c0, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA3__KPP_ROW_6 IOMUX_PAD(0x784, 0x320, 4, 0x988, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA3__GPIO3_22 IOMUX_PAD(0x784, 0x320, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_TDATA3__FEC_TDATA_3 IOMUX_PAD(0x788, 0x324, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA3__IPU_CSI_D_7 IOMUX_PAD(0x788, 0x324, 1, 0x94c, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS IOMUX_PAD(0x788, 0x324, 2, 0x7c4, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA3__KPP_ROW_7 IOMUX_PAD(0x788, 0x324, 4, 0x98c, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA3__GPIO3_23 IOMUX_PAD(0x788, 0x324, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK IOMUX_PAD(0x78c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_TEST_MODE__TCU_TEST_MODE IOMUX_PAD(0x790, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-
-#endif /* __MACH_IOMUX_MX35_H__ */
diff --git a/arch/arm/mach-imx/iomux-v1.c b/arch/arm/mach-imx/iomux-v1.c
deleted file mode 100644
index a4bec3b9b2b3..000000000000
--- a/arch/arm/mach-imx/iomux-v1.c
+++ /dev/null
@@ -1,174 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/plat-mxc/iomux-v1.c
- *
- * Copyright (C) 2004 Sascha Hauer, Synertronixx GmbH
- * Copyright (C) 2009 Uwe Kleine-Koenig, Pengutronix
- *
- * Common code for i.MX1, i.MX21 and i.MX27
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/map.h>
-
-#include "hardware.h"
-#include "iomux-v1.h"
-
-static void __iomem *imx_iomuxv1_baseaddr;
-static unsigned imx_iomuxv1_numports;
-
-static inline unsigned long imx_iomuxv1_readl(unsigned offset)
-{
- return imx_readl(imx_iomuxv1_baseaddr + offset);
-}
-
-static inline void imx_iomuxv1_writel(unsigned long val, unsigned offset)
-{
- imx_writel(val, imx_iomuxv1_baseaddr + offset);
-}
-
-static inline void imx_iomuxv1_rmwl(unsigned offset,
- unsigned long mask, unsigned long value)
-{
- unsigned long reg = imx_iomuxv1_readl(offset);
-
- reg &= ~mask;
- reg |= value;
-
- imx_iomuxv1_writel(reg, offset);
-}
-
-static inline void imx_iomuxv1_set_puen(
- unsigned int port, unsigned int pin, int on)
-{
- unsigned long mask = 1 << pin;
-
- imx_iomuxv1_rmwl(MXC_PUEN(port), mask, on ? mask : 0);
-}
-
-static inline void imx_iomuxv1_set_ddir(
- unsigned int port, unsigned int pin, int out)
-{
- unsigned long mask = 1 << pin;
-
- imx_iomuxv1_rmwl(MXC_DDIR(port), mask, out ? mask : 0);
-}
-
-static inline void imx_iomuxv1_set_gpr(
- unsigned int port, unsigned int pin, int af)
-{
- unsigned long mask = 1 << pin;
-
- imx_iomuxv1_rmwl(MXC_GPR(port), mask, af ? mask : 0);
-}
-
-static inline void imx_iomuxv1_set_gius(
- unsigned int port, unsigned int pin, int inuse)
-{
- unsigned long mask = 1 << pin;
-
- imx_iomuxv1_rmwl(MXC_GIUS(port), mask, inuse ? mask : 0);
-}
-
-static inline void imx_iomuxv1_set_ocr(
- unsigned int port, unsigned int pin, unsigned int ocr)
-{
- unsigned long shift = (pin & 0xf) << 1;
- unsigned long mask = 3 << shift;
- unsigned long value = ocr << shift;
- unsigned long offset = pin < 16 ? MXC_OCR1(port) : MXC_OCR2(port);
-
- imx_iomuxv1_rmwl(offset, mask, value);
-}
-
-static inline void imx_iomuxv1_set_iconfa(
- unsigned int port, unsigned int pin, unsigned int aout)
-{
- unsigned long shift = (pin & 0xf) << 1;
- unsigned long mask = 3 << shift;
- unsigned long value = aout << shift;
- unsigned long offset = pin < 16 ? MXC_ICONFA1(port) : MXC_ICONFA2(port);
-
- imx_iomuxv1_rmwl(offset, mask, value);
-}
-
-static inline void imx_iomuxv1_set_iconfb(
- unsigned int port, unsigned int pin, unsigned int bout)
-{
- unsigned long shift = (pin & 0xf) << 1;
- unsigned long mask = 3 << shift;
- unsigned long value = bout << shift;
- unsigned long offset = pin < 16 ? MXC_ICONFB1(port) : MXC_ICONFB2(port);
-
- imx_iomuxv1_rmwl(offset, mask, value);
-}
-
-int mxc_gpio_mode(int gpio_mode)
-{
- unsigned int pin = gpio_mode & GPIO_PIN_MASK;
- unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
- unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
- unsigned int aout = (gpio_mode >> GPIO_AOUT_SHIFT) & 3;
- unsigned int bout = (gpio_mode >> GPIO_BOUT_SHIFT) & 3;
-
- if (port >= imx_iomuxv1_numports)
- return -EINVAL;
-
- /* Pullup enable */
- imx_iomuxv1_set_puen(port, pin, gpio_mode & GPIO_PUEN);
-
- /* Data direction */
- imx_iomuxv1_set_ddir(port, pin, gpio_mode & GPIO_OUT);
-
- /* Primary / alternate function */
- imx_iomuxv1_set_gpr(port, pin, gpio_mode & GPIO_AF);
-
- /* use as gpio? */
- imx_iomuxv1_set_gius(port, pin, !(gpio_mode & (GPIO_PF | GPIO_AF)));
-
- imx_iomuxv1_set_ocr(port, pin, ocr);
-
- imx_iomuxv1_set_iconfa(port, pin, aout);
-
- imx_iomuxv1_set_iconfb(port, pin, bout);
-
- return 0;
-}
-
-static int imx_iomuxv1_setup_multiple(const int *list, unsigned count)
-{
- size_t i;
- int ret = 0;
-
- for (i = 0; i < count; ++i) {
- ret = mxc_gpio_mode(list[i]);
-
- if (ret)
- return ret;
- }
-
- return ret;
-}
-
-int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
- const char *label)
-{
- int ret;
-
- ret = imx_iomuxv1_setup_multiple(pin_list, count);
- return ret;
-}
-
-int __init imx_iomuxv1_init(void __iomem *base, int numports)
-{
- imx_iomuxv1_baseaddr = base;
- imx_iomuxv1_numports = numports;
-
- return 0;
-}
diff --git a/arch/arm/mach-imx/iomux-v1.h b/arch/arm/mach-imx/iomux-v1.h
deleted file mode 100644
index b94852970c7f..000000000000
--- a/arch/arm/mach-imx/iomux-v1.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
- */
-#ifndef __MACH_IOMUX_V1_H__
-#define __MACH_IOMUX_V1_H__
-
-/*
-* GPIO Module and I/O Multiplexer
-* x = 0..3 for reg_A, reg_B, reg_C, reg_D
-*/
-#define MXC_DDIR(x) (0x00 + ((x) << 8))
-#define MXC_OCR1(x) (0x04 + ((x) << 8))
-#define MXC_OCR2(x) (0x08 + ((x) << 8))
-#define MXC_ICONFA1(x) (0x0c + ((x) << 8))
-#define MXC_ICONFA2(x) (0x10 + ((x) << 8))
-#define MXC_ICONFB1(x) (0x14 + ((x) << 8))
-#define MXC_ICONFB2(x) (0x18 + ((x) << 8))
-#define MXC_DR(x) (0x1c + ((x) << 8))
-#define MXC_GIUS(x) (0x20 + ((x) << 8))
-#define MXC_SSR(x) (0x24 + ((x) << 8))
-#define MXC_ICR1(x) (0x28 + ((x) << 8))
-#define MXC_ICR2(x) (0x2c + ((x) << 8))
-#define MXC_IMR(x) (0x30 + ((x) << 8))
-#define MXC_ISR(x) (0x34 + ((x) << 8))
-#define MXC_GPR(x) (0x38 + ((x) << 8))
-#define MXC_SWR(x) (0x3c + ((x) << 8))
-#define MXC_PUEN(x) (0x40 + ((x) << 8))
-
-#define MX1_NUM_GPIO_PORT 4
-#define MX21_NUM_GPIO_PORT 6
-#define MX27_NUM_GPIO_PORT 6
-
-#define GPIO_PIN_MASK 0x1f
-
-#define GPIO_PORT_SHIFT 5
-#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
-
-#define GPIO_PORTA (0 << GPIO_PORT_SHIFT)
-#define GPIO_PORTB (1 << GPIO_PORT_SHIFT)
-#define GPIO_PORTC (2 << GPIO_PORT_SHIFT)
-#define GPIO_PORTD (3 << GPIO_PORT_SHIFT)
-#define GPIO_PORTE (4 << GPIO_PORT_SHIFT)
-#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
-
-#define GPIO_OUT (1 << 8)
-#define GPIO_IN (0 << 8)
-#define GPIO_PUEN (1 << 9)
-
-#define GPIO_PF (1 << 10)
-#define GPIO_AF (1 << 11)
-
-#define GPIO_OCR_SHIFT 12
-#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT)
-#define GPIO_AIN (0 << GPIO_OCR_SHIFT)
-#define GPIO_BIN (1 << GPIO_OCR_SHIFT)
-#define GPIO_CIN (2 << GPIO_OCR_SHIFT)
-#define GPIO_GPIO (3 << GPIO_OCR_SHIFT)
-
-#define GPIO_AOUT_SHIFT 14
-#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT (0 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_0 (2 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_1 (3 << GPIO_AOUT_SHIFT)
-
-#define GPIO_BOUT_SHIFT 16
-#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT (0 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_ISR (1 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT)
-
-extern int mxc_gpio_mode(int gpio_mode);
-extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
- const char *label);
-
-extern int imx_iomuxv1_init(void __iomem *base, int numports);
-
-#endif /* __MACH_IOMUX_V1_H__ */
diff --git a/arch/arm/mach-imx/iomux-v3.c b/arch/arm/mach-imx/iomux-v3.c
deleted file mode 100644
index 043cf3c7cacf..000000000000
--- a/arch/arm/mach-imx/iomux-v3.c
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
- * <armlinux@phytec.de>
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/map.h>
-
-#include "hardware.h"
-#include "iomux-v3.h"
-
-static void __iomem *base;
-
-/*
- * configures a single pad in the iomuxer
- */
-int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
-{
- u32 mux_ctrl_ofs = (pad & MUX_CTRL_OFS_MASK) >> MUX_CTRL_OFS_SHIFT;
- u32 mux_mode = (pad & MUX_MODE_MASK) >> MUX_MODE_SHIFT;
- u32 sel_input_ofs = (pad & MUX_SEL_INPUT_OFS_MASK) >> MUX_SEL_INPUT_OFS_SHIFT;
- u32 sel_input = (pad & MUX_SEL_INPUT_MASK) >> MUX_SEL_INPUT_SHIFT;
- u32 pad_ctrl_ofs = (pad & MUX_PAD_CTRL_OFS_MASK) >> MUX_PAD_CTRL_OFS_SHIFT;
- u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT;
-
- if (mux_ctrl_ofs)
- imx_writel(mux_mode, base + mux_ctrl_ofs);
-
- if (sel_input_ofs)
- imx_writel(sel_input, base + sel_input_ofs);
-
- if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs)
- imx_writel(pad_ctrl, base + pad_ctrl_ofs);
-
- return 0;
-}
-
-int mxc_iomux_v3_setup_multiple_pads(const iomux_v3_cfg_t *pad_list,
- unsigned count)
-{
- const iomux_v3_cfg_t *p = pad_list;
- int i;
- int ret;
-
- for (i = 0; i < count; i++) {
- ret = mxc_iomux_v3_setup_pad(*p);
- if (ret)
- return ret;
- p++;
- }
- return 0;
-}
-
-void mxc_iomux_v3_init(void __iomem *iomux_v3_base)
-{
- base = iomux_v3_base;
-}
diff --git a/arch/arm/mach-imx/iomux-v3.h b/arch/arm/mach-imx/iomux-v3.h
deleted file mode 100644
index 7db8ec926ff1..000000000000
--- a/arch/arm/mach-imx/iomux-v3.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
- * <armlinux@phytec.de>
- */
-
-#ifndef __MACH_IOMUX_V3_H__
-#define __MACH_IOMUX_V3_H__
-
-/*
- * build IOMUX_PAD structure
- *
- * This iomux scheme is based around pads, which are the physical balls
- * on the processor.
- *
- * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls
- * things like driving strength and pullup/pulldown.
- * - Each pad can have but not necessarily does have an output routing register
- * (IOMUXC_SW_MUX_CTL_PAD_x).
- * - Each pad can have but not necessarily does have an input routing register
- * (IOMUXC_x_SELECT_INPUT)
- *
- * The three register sets do not have a fixed offset to each other,
- * hence we order this table by pad control registers (which all pads
- * have) and put the optional i/o routing registers into additional
- * fields.
- *
- * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named
- * GPIO_<unit>_<num>
- *
- * IOMUX/PAD Bit field definitions
- *
- * MUX_CTRL_OFS: 0..11 (12)
- * PAD_CTRL_OFS: 12..23 (12)
- * SEL_INPUT_OFS: 24..35 (12)
- * MUX_MODE + SION: 36..40 (5)
- * PAD_CTRL + NO_PAD_CTRL: 41..57 (17)
- * SEL_INP: 58..61 (4)
- * reserved: 63 (1)
-*/
-
-typedef u64 iomux_v3_cfg_t;
-
-#define MUX_CTRL_OFS_SHIFT 0
-#define MUX_CTRL_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_CTRL_OFS_SHIFT)
-#define MUX_PAD_CTRL_OFS_SHIFT 12
-#define MUX_PAD_CTRL_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_PAD_CTRL_OFS_SHIFT)
-#define MUX_SEL_INPUT_OFS_SHIFT 24
-#define MUX_SEL_INPUT_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_SEL_INPUT_OFS_SHIFT)
-
-#define MUX_MODE_SHIFT 36
-#define MUX_MODE_MASK ((iomux_v3_cfg_t)0x1f << MUX_MODE_SHIFT)
-#define MUX_PAD_CTRL_SHIFT 41
-#define MUX_PAD_CTRL_MASK ((iomux_v3_cfg_t)0x1ffff << MUX_PAD_CTRL_SHIFT)
-#define MUX_SEL_INPUT_SHIFT 58
-#define MUX_SEL_INPUT_MASK ((iomux_v3_cfg_t)0xf << MUX_SEL_INPUT_SHIFT)
-
-#define MUX_PAD_CTRL(x) ((iomux_v3_cfg_t)(x) << MUX_PAD_CTRL_SHIFT)
-
-#define IOMUX_PAD(_pad_ctrl_ofs, _mux_ctrl_ofs, _mux_mode, _sel_input_ofs, \
- _sel_input, _pad_ctrl) \
- (((iomux_v3_cfg_t)(_mux_ctrl_ofs) << MUX_CTRL_OFS_SHIFT) | \
- ((iomux_v3_cfg_t)(_mux_mode) << MUX_MODE_SHIFT) | \
- ((iomux_v3_cfg_t)(_pad_ctrl_ofs) << MUX_PAD_CTRL_OFS_SHIFT) | \
- ((iomux_v3_cfg_t)(_pad_ctrl) << MUX_PAD_CTRL_SHIFT) | \
- ((iomux_v3_cfg_t)(_sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT) | \
- ((iomux_v3_cfg_t)(_sel_input) << MUX_SEL_INPUT_SHIFT))
-
-#define NEW_PAD_CTRL(cfg, pad) (((cfg) & ~MUX_PAD_CTRL_MASK) | MUX_PAD_CTRL(pad))
-/*
- * Use to set PAD control
- */
-
-#define NO_PAD_CTRL (1 << 16)
-#define PAD_CTL_DVS (1 << 13)
-#define PAD_CTL_HYS (1 << 8)
-
-#define PAD_CTL_PKE (1 << 7)
-#define PAD_CTL_PUE (1 << 6 | PAD_CTL_PKE)
-#define PAD_CTL_PUS_100K_DOWN (0 << 4 | PAD_CTL_PUE)
-#define PAD_CTL_PUS_47K_UP (1 << 4 | PAD_CTL_PUE)
-#define PAD_CTL_PUS_100K_UP (2 << 4 | PAD_CTL_PUE)
-#define PAD_CTL_PUS_22K_UP (3 << 4 | PAD_CTL_PUE)
-
-#define PAD_CTL_ODE (1 << 3)
-
-#define PAD_CTL_DSE_LOW (0 << 1)
-#define PAD_CTL_DSE_MED (1 << 1)
-#define PAD_CTL_DSE_HIGH (2 << 1)
-#define PAD_CTL_DSE_MAX (3 << 1)
-
-#define PAD_CTL_SRE_FAST (1 << 0)
-#define PAD_CTL_SRE_SLOW (0 << 0)
-
-#define IOMUX_CONFIG_SION (0x1 << 4)
-
-#define MX51_NUM_GPIO_PORT 4
-
-#define GPIO_PIN_MASK 0x1f
-
-#define GPIO_PORT_SHIFT 5
-#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
-
-#define GPIO_PORTA (0 << GPIO_PORT_SHIFT)
-#define GPIO_PORTB (1 << GPIO_PORT_SHIFT)
-#define GPIO_PORTC (2 << GPIO_PORT_SHIFT)
-#define GPIO_PORTD (3 << GPIO_PORT_SHIFT)
-#define GPIO_PORTE (4 << GPIO_PORT_SHIFT)
-#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
-
-/*
- * setups a single pad in the iomuxer
- */
-int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
-
-/*
- * setups multiple pads
- * convenient way to call the above function with tables
- */
-int mxc_iomux_v3_setup_multiple_pads(const iomux_v3_cfg_t *pad_list,
- unsigned count);
-
-/*
- * Initialise the iomux controller
- */
-void mxc_iomux_v3_init(void __iomem *iomux_v3_base);
-
-#endif /* __MACH_IOMUX_V3_H__*/
-
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
deleted file mode 100644
index 4d9a56fb6989..000000000000
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ /dev/null
@@ -1,562 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * armadillo5x0.c
- *
- * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
- * updates in http://alberdroid.blogspot.com/
- *
- * Based on Atmark Techno, Inc. armadillo 500 BSP 2008
- * Based on mx31ads.c and pcm037.c Great Work!
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/io.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <linux/delay.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx31.h"
-#include "crmregs-imx3.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-#include "ulpi.h"
-
-static int armadillo5x0_pins[] = {
- /* UART1 */
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1,
- /* UART2 */
- MX31_PIN_CTS2__CTS2,
- MX31_PIN_RTS2__RTS2,
- MX31_PIN_TXD2__TXD2,
- MX31_PIN_RXD2__RXD2,
- /* LAN9118_IRQ */
- IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO),
- /* SDHC1 */
- MX31_PIN_SD1_DATA3__SD1_DATA3,
- MX31_PIN_SD1_DATA2__SD1_DATA2,
- MX31_PIN_SD1_DATA1__SD1_DATA1,
- MX31_PIN_SD1_DATA0__SD1_DATA0,
- MX31_PIN_SD1_CLK__SD1_CLK,
- MX31_PIN_SD1_CMD__SD1_CMD,
- /* Framebuffer */
- MX31_PIN_LD0__LD0,
- MX31_PIN_LD1__LD1,
- MX31_PIN_LD2__LD2,
- MX31_PIN_LD3__LD3,
- MX31_PIN_LD4__LD4,
- MX31_PIN_LD5__LD5,
- MX31_PIN_LD6__LD6,
- MX31_PIN_LD7__LD7,
- MX31_PIN_LD8__LD8,
- MX31_PIN_LD9__LD9,
- MX31_PIN_LD10__LD10,
- MX31_PIN_LD11__LD11,
- MX31_PIN_LD12__LD12,
- MX31_PIN_LD13__LD13,
- MX31_PIN_LD14__LD14,
- MX31_PIN_LD15__LD15,
- MX31_PIN_LD16__LD16,
- MX31_PIN_LD17__LD17,
- MX31_PIN_VSYNC3__VSYNC3,
- MX31_PIN_HSYNC__HSYNC,
- MX31_PIN_FPSHIFT__FPSHIFT,
- MX31_PIN_DRDY0__DRDY0,
- IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
- /* I2C2 */
- MX31_PIN_CSPI2_MOSI__SCL,
- MX31_PIN_CSPI2_MISO__SDA,
- /* OTG */
- MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
- MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
- MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
- MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
- MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
- MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
- MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
- MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
- MX31_PIN_USBOTG_CLK__USBOTG_CLK,
- MX31_PIN_USBOTG_DIR__USBOTG_DIR,
- MX31_PIN_USBOTG_NXT__USBOTG_NXT,
- MX31_PIN_USBOTG_STP__USBOTG_STP,
- /* USB host 2 */
- IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC),
-};
-
-/* USB */
-
-#define OTG_RESET IOMUX_TO_GPIO(MX31_PIN_STXD4)
-#define USBH2_RESET IOMUX_TO_GPIO(MX31_PIN_SCK6)
-#define USBH2_CS IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
- PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-static int usbotg_init(struct platform_device *pdev)
-{
- int err;
-
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
-
- /* Chip already enabled by hardware */
- /* OTG phy reset*/
- err = gpio_request(OTG_RESET, "USB-OTG-RESET");
- if (err) {
- pr_err("Failed to request the usb otg reset gpio\n");
- return err;
- }
-
- err = gpio_direction_output(OTG_RESET, 1/*HIGH*/);
- if (err) {
- pr_err("Failed to reset the usb otg phy\n");
- goto otg_free_reset;
- }
-
- gpio_set_value(OTG_RESET, 0/*LOW*/);
- mdelay(5);
- gpio_set_value(OTG_RESET, 1/*HIGH*/);
- mdelay(10);
-
- return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
- MXC_EHCI_INTERFACE_DIFF_UNI);
-
-otg_free_reset:
- gpio_free(OTG_RESET);
- return err;
-}
-
-static int usbh2_init(struct platform_device *pdev)
-{
- int err;
-
- mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
-
- mxc_iomux_set_gpr(MUX_PGP_UH2, true);
-
-
- /* Enable the chip */
- err = gpio_request(USBH2_CS, "USB-H2-CS");
- if (err) {
- pr_err("Failed to request the usb host 2 CS gpio\n");
- return err;
- }
-
- err = gpio_direction_output(USBH2_CS, 0/*Enabled*/);
- if (err) {
- pr_err("Failed to drive the usb host 2 CS gpio\n");
- goto h2_free_cs;
- }
-
- /* H2 phy reset*/
- err = gpio_request(USBH2_RESET, "USB-H2-RESET");
- if (err) {
- pr_err("Failed to request the usb host 2 reset gpio\n");
- goto h2_free_cs;
- }
-
- err = gpio_direction_output(USBH2_RESET, 1/*HIGH*/);
- if (err) {
- pr_err("Failed to reset the usb host 2 phy\n");
- goto h2_free_reset;
- }
-
- gpio_set_value(USBH2_RESET, 0/*LOW*/);
- mdelay(5);
- gpio_set_value(USBH2_RESET, 1/*HIGH*/);
- mdelay(10);
-
- return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
- MXC_EHCI_INTERFACE_DIFF_UNI);
-
-h2_free_reset:
- gpio_free(USBH2_RESET);
-h2_free_cs:
- gpio_free(USBH2_CS);
- return err;
-}
-
-static struct mxc_usbh_platform_data usbotg_pdata __initdata = {
- .init = usbotg_init,
- .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-};
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
- .init = usbh2_init,
- .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-};
-
-/* RTC over I2C*/
-#define ARMADILLO5X0_RTC_GPIO IOMUX_TO_GPIO(MX31_PIN_SRXD4)
-
-static struct i2c_board_info armadillo5x0_i2c_rtc = {
- I2C_BOARD_INFO("s35390a", 0x30),
-};
-
-/* GPIO BUTTONS */
-static struct gpio_keys_button armadillo5x0_buttons[] = {
- {
- .code = KEY_ENTER, /*28*/
- .gpio = IOMUX_TO_GPIO(MX31_PIN_SCLK0),
- .active_low = 1,
- .desc = "menu",
- .wakeup = 1,
- }, {
- .code = KEY_BACK, /*158*/
- .gpio = IOMUX_TO_GPIO(MX31_PIN_SRST0),
- .active_low = 1,
- .desc = "back",
- .wakeup = 1,
- }
-};
-
-static const struct gpio_keys_platform_data
- armadillo5x0_button_data __initconst = {
- .buttons = armadillo5x0_buttons,
- .nbuttons = ARRAY_SIZE(armadillo5x0_buttons),
-};
-
-/*
- * NAND Flash
- */
-static const struct mxc_nand_platform_data
-armadillo5x0_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-/*
- * MTD NOR Flash
- */
-static struct mtd_partition armadillo5x0_nor_flash_partitions[] = {
- {
- .name = "nor.bootloader",
- .offset = 0x00000000,
- .size = 4*32*1024,
- }, {
- .name = "nor.kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = 16*128*1024,
- }, {
- .name = "nor.userland",
- .offset = MTDPART_OFS_APPEND,
- .size = 110*128*1024,
- }, {
- .name = "nor.config",
- .offset = MTDPART_OFS_APPEND,
- .size = 1*128*1024,
- },
-};
-
-static const struct physmap_flash_data
- armadillo5x0_nor_flash_pdata __initconst = {
- .width = 2,
- .parts = armadillo5x0_nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(armadillo5x0_nor_flash_partitions),
-};
-
-static const struct resource armadillo5x0_nor_flash_resource __initconst = {
- .flags = IORESOURCE_MEM,
- .start = MX31_CS0_BASE_ADDR,
- .end = MX31_CS0_BASE_ADDR + SZ_64M - 1,
-};
-
-/*
- * FB support
- */
-static const struct fb_videomode fb_modedb[] = {
- { /* 640x480 @ 60 Hz */
- .name = "CRT-VGA",
- .refresh = 60,
- .xres = 640,
- .yres = 480,
- .pixclock = 39721,
- .left_margin = 35,
- .right_margin = 115,
- .upper_margin = 43,
- .lower_margin = 1,
- .hsync_len = 10,
- .vsync_len = 1,
- .sync = FB_SYNC_OE_ACT_HIGH,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- }, {/* 800x600 @ 56 Hz */
- .name = "CRT-SVGA",
- .refresh = 56,
- .xres = 800,
- .yres = 600,
- .pixclock = 30000,
- .left_margin = 30,
- .right_margin = 108,
- .upper_margin = 13,
- .lower_margin = 10,
- .hsync_len = 10,
- .vsync_len = 1,
- .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_HOR_HIGH_ACT |
- FB_SYNC_VERT_HIGH_ACT,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- },
-};
-
-static struct mx3fb_platform_data mx3fb_pdata __initdata = {
- .name = "CRT-VGA",
- .mode = fb_modedb,
- .num_modes = ARRAY_SIZE(fb_modedb),
-};
-
-/*
- * SDHC 1
- * MMC support
- */
-static int armadillo5x0_sdhc1_get_ro(struct device *dev)
-{
- return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
-}
-
-static int armadillo5x0_sdhc1_init(struct device *dev,
- irq_handler_t detect_irq, void *data)
-{
- int ret;
- int gpio_det, gpio_wp;
-
- gpio_det = IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK);
- gpio_wp = IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B);
-
- ret = gpio_request(gpio_det, "sdhc-card-detect");
- if (ret)
- return ret;
-
- gpio_direction_input(gpio_det);
-
- ret = gpio_request(gpio_wp, "sdhc-write-protect");
- if (ret)
- goto err_gpio_free;
-
- gpio_direction_input(gpio_wp);
-
- /* When supported the trigger type have to be BOTH */
- ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)),
- detect_irq, IRQF_TRIGGER_FALLING,
- "sdhc-detect", data);
-
- if (ret)
- goto err_gpio_free_2;
-
- return 0;
-
-err_gpio_free_2:
- gpio_free(gpio_wp);
-
-err_gpio_free:
- gpio_free(gpio_det);
-
- return ret;
-
-}
-
-static void armadillo5x0_sdhc1_exit(struct device *dev, void *data)
-{
- free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)), data);
- gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK));
- gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
-}
-
-static const struct imxmmc_platform_data sdhc_pdata __initconst = {
- .get_ro = armadillo5x0_sdhc1_get_ro,
- .init = armadillo5x0_sdhc1_init,
- .exit = armadillo5x0_sdhc1_exit,
-};
-
-/*
- * SMSC 9118
- * Network support
- */
-static struct resource armadillo5x0_smc911x_resources[] = {
- {
- .start = MX31_CS3_BASE_ADDR,
- .end = MX31_CS3_BASE_ADDR + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- /* irq number is run-time assigned */
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },
-};
-
-static struct smsc911x_platform_config smsc911x_info = {
- .flags = SMSC911X_USE_16BIT,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device armadillo5x0_smc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(armadillo5x0_smc911x_resources),
- .resource = armadillo5x0_smc911x_resources,
- .dev = {
- .platform_data = &smsc911x_info,
- },
-};
-
-/* UART device data */
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct platform_device *devices[] __initdata = {
- &armadillo5x0_smc911x_device,
-};
-
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
-};
-
-/*
- * Perform board specific initializations
- */
-static void __init armadillo5x0_init(void)
-{
- imx31_soc_init();
-
- mxc_iomux_setup_multiple_pins(armadillo5x0_pins,
- ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
-
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- imx31_add_imx_i2c1(NULL);
-
- /* Register UART */
- imx31_add_imx_uart0(&uart_pdata);
- imx31_add_imx_uart1(&uart_pdata);
-
- /* Register FB */
- imx31_add_ipu_core();
- imx31_add_mx3_sdc_fb(&mx3fb_pdata);
-
- /* Register NOR Flash */
- platform_device_register_resndata(NULL, "physmap-flash", -1,
- &armadillo5x0_nor_flash_resource, 1,
- &armadillo5x0_nor_flash_pdata,
- sizeof(armadillo5x0_nor_flash_pdata));
-
- /* Register NAND Flash */
- imx31_add_mxc_nand(&armadillo5x0_nand_board_info);
-
- /* set NAND page size to 2k if not configured via boot mode pins */
- imx_writel(imx_readl(mx3_ccm_base + MXC_CCM_RCSR) | (1 << 30),
- mx3_ccm_base + MXC_CCM_RCSR);
-}
-
-static void __init armadillo5x0_late(void)
-{
- armadillo5x0_smc911x_resources[1].start =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
- armadillo5x0_smc911x_resources[1].end =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- imx_add_gpio_keys(&armadillo5x0_button_data);
-
- /* SMSC9118 IRQ pin */
- gpio_direction_input(MX31_PIN_GPIO1_0);
-
- /* Register SDHC */
- imx31_add_mxc_mmc(0, &sdhc_pdata);
-
- /* RTC */
- /* Get RTC IRQ and register the chip */
- if (!gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc")) {
- if (!gpio_direction_input(ARMADILLO5X0_RTC_GPIO))
- armadillo5x0_i2c_rtc.irq =
- gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
- else
- gpio_free(ARMADILLO5X0_RTC_GPIO);
- }
-
- if (armadillo5x0_i2c_rtc.irq == 0)
- pr_warn("armadillo5x0_init: failed to get RTC IRQ\n");
- i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
-
- /* USB */
- usbotg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT);
- if (usbotg_pdata.otg)
- imx31_add_mxc_ehci_otg(&usbotg_pdata);
- usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT);
- if (usbh2_pdata.otg)
- imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-}
-
-static void __init armadillo5x0_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-MACHINE_START(ARMADILLO5X0, "Armadillo-500")
- /* Maintainer: Alberto Panizzo */
- .atag_offset = 0x100,
- .map_io = mx31_map_io,
- .init_early = imx31_init_early,
- .init_irq = mx31_init_irq,
- .init_time = armadillo5x0_timer_init,
- .init_machine = armadillo5x0_init,
- .init_late = armadillo5x0_late,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c
deleted file mode 100644
index 3929208600f2..000000000000
--- a/arch/arm/mach-imx/mach-bug.c
+++ /dev/null
@@ -1,54 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2011 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/time.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include "common.h"
-#include "devices-imx31.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const unsigned int bug_pins[] __initconst = {
- MX31_PIN_PC_RST__CTS5,
- MX31_PIN_PC_VS2__RTS5,
- MX31_PIN_PC_BVD2__TXD5,
- MX31_PIN_PC_BVD1__RXD5,
-};
-
-static void __init bug_board_init(void)
-{
- imx31_soc_init();
-
- mxc_iomux_setup_multiple_pins(bug_pins,
- ARRAY_SIZE(bug_pins), "uart-4");
- imx31_add_imx_uart4(&uart_pdata);
-}
-
-static void __init bug_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-MACHINE_START(BUG, "BugLabs BUGBase")
- .map_io = mx31_map_io,
- .init_early = imx31_init_early,
- .init_irq = mx31_init_irq,
- .init_time = bug_timer_init,
- .init_machine = bug_board_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27.c b/arch/arm/mach-imx/mach-imx27.c
new file mode 100644
index 000000000000..262422a9c196
--- /dev/null
+++ b/arch/arm/mach-imx/mach-imx27.c
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/mm.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+#include "common.h"
+#include "hardware.h"
+#include "mx27.h"
+
+/* MX27 memory map definition */
+static struct map_desc imx27_io_desc[] __initdata = {
+ /*
+ * this fixed mapping covers:
+ * - AIPI1
+ * - AIPI2
+ * - AITC
+ * - ROM Patch
+ * - and some reserved space
+ */
+ imx_map_entry(MX27, AIPI, MT_DEVICE),
+ /*
+ * this fixed mapping covers:
+ * - CSI
+ * - ATA
+ */
+ imx_map_entry(MX27, SAHB1, MT_DEVICE),
+ /*
+ * this fixed mapping covers:
+ * - EMI
+ */
+ imx_map_entry(MX27, X_MEMC, MT_DEVICE),
+};
+
+/*
+ * Initialize the memory map. It is called during the
+ * system startup to create static physical to virtual
+ * memory map for the IO modules.
+ */
+static void __init mx27_map_io(void)
+{
+ iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc));
+}
+
+static void __init imx27_init_early(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX27);
+}
+
+static void __init mx27_init_irq(void)
+{
+ void __iomem *avic_base;
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,avic");
+ avic_base = of_iomap(np, 0);
+ BUG_ON(!avic_base);
+ mxc_init_irq(avic_base);
+}
+
+static const char * const imx27_dt_board_compat[] __initconst = {
+ "fsl,imx27",
+ NULL
+};
+
+DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)")
+ .map_io = mx27_map_io,
+ .init_early = imx27_init_early,
+ .init_irq = mx27_init_irq,
+ .init_late = imx27_pm_init,
+ .dt_compat = imx27_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
deleted file mode 100644
index a329e50928b6..000000000000
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ /dev/null
@@ -1,562 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * mach-imx27_visstrim_m10.c
- *
- * Copyright 2010 Javier Martin <javier.martin@vista-silicon.com>
- *
- * Based on mach-pcm038.c, mach-pca100.c, mach-mx27ads.c and others.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/dma-map-ops.h>
-#include <linux/leds.h>
-#include <linux/platform_data/asoc-mx27vis.h>
-#include <sound/tlv320aic32x4.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/system_info.h>
-#include <asm/memblock.h>
-
-#include "common.h"
-#include "devices-imx27.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx27.h"
-
-#define TVP5150_RSTN (GPIO_PORTC + 18)
-#define TVP5150_PWDN (GPIO_PORTC + 19)
-#define OTG_PHY_CS_GPIO (GPIO_PORTF + 17)
-#define SDHC1_IRQ_GPIO IMX_GPIO_NR(2, 25)
-
-#define VERSION_MASK 0x7
-#define MOTHERBOARD_SHIFT 4
-#define EXPBOARD_SHIFT 0
-
-#define MOTHERBOARD_BIT2 (GPIO_PORTD + 31)
-#define MOTHERBOARD_BIT1 (GPIO_PORTD + 30)
-#define MOTHERBOARD_BIT0 (GPIO_PORTD + 29)
-
-#define EXPBOARD_BIT2 (GPIO_PORTD + 25)
-#define EXPBOARD_BIT1 (GPIO_PORTD + 27)
-#define EXPBOARD_BIT0 (GPIO_PORTD + 28)
-
-#define AMP_GAIN_0 (GPIO_PORTF + 9)
-#define AMP_GAIN_1 (GPIO_PORTF + 8)
-#define AMP_MUTE_SDL (GPIO_PORTE + 5)
-#define AMP_MUTE_SDR (GPIO_PORTF + 7)
-
-static const int visstrim_m10_pins[] __initconst = {
- /* UART1 (console) */
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS,
- /* FEC */
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN,
- /* SSI1 */
- PC20_PF_SSI1_FS,
- PC21_PF_SSI1_RXD,
- PC22_PF_SSI1_TXD,
- PC23_PF_SSI1_CLK,
- /* SDHC1 */
- PE18_PF_SD1_D0,
- PE19_PF_SD1_D1,
- PE20_PF_SD1_D2,
- PE21_PF_SD1_D3,
- PE22_PF_SD1_CMD,
- PE23_PF_SD1_CLK,
- /* Both I2Cs */
- PD17_PF_I2C_DATA,
- PD18_PF_I2C_CLK,
- PC5_PF_I2C2_SDA,
- PC6_PF_I2C2_SCL,
- /* USB OTG */
- OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
- PC9_PF_USBOTG_DATA0,
- PC11_PF_USBOTG_DATA1,
- PC10_PF_USBOTG_DATA2,
- PC13_PF_USBOTG_DATA3,
- PC12_PF_USBOTG_DATA4,
- PC7_PF_USBOTG_DATA5,
- PC8_PF_USBOTG_DATA6,
- PE25_PF_USBOTG_DATA7,
- PE24_PF_USBOTG_CLK,
- PE2_PF_USBOTG_DIR,
- PE0_PF_USBOTG_NXT,
- PE1_PF_USBOTG_STP,
- PB23_PF_USB_PWR,
- PB24_PF_USB_OC,
- /* CSI */
- TVP5150_RSTN | GPIO_GPIO | GPIO_OUT,
- TVP5150_PWDN | GPIO_GPIO | GPIO_OUT,
- PB10_PF_CSI_D0,
- PB11_PF_CSI_D1,
- PB12_PF_CSI_D2,
- PB13_PF_CSI_D3,
- PB14_PF_CSI_D4,
- PB15_PF_CSI_MCLK,
- PB16_PF_CSI_PIXCLK,
- PB17_PF_CSI_D5,
- PB18_PF_CSI_D6,
- PB19_PF_CSI_D7,
- PB20_PF_CSI_VSYNC,
- PB21_PF_CSI_HSYNC,
- /* mother board version */
- MOTHERBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
- MOTHERBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
- MOTHERBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
- /* expansion board version */
- EXPBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
- EXPBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
- EXPBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
- /* Audio AMP control */
- AMP_GAIN_0 | GPIO_GPIO | GPIO_OUT,
- AMP_GAIN_1 | GPIO_GPIO | GPIO_OUT,
- AMP_MUTE_SDL | GPIO_GPIO | GPIO_OUT,
- AMP_MUTE_SDR | GPIO_GPIO | GPIO_OUT,
-};
-
-static struct gpio visstrim_m10_version_gpios[] = {
- { EXPBOARD_BIT0, GPIOF_IN, "exp-version-0" },
- { EXPBOARD_BIT1, GPIOF_IN, "exp-version-1" },
- { EXPBOARD_BIT2, GPIOF_IN, "exp-version-2" },
- { MOTHERBOARD_BIT0, GPIOF_IN, "mother-version-0" },
- { MOTHERBOARD_BIT1, GPIOF_IN, "mother-version-1" },
- { MOTHERBOARD_BIT2, GPIOF_IN, "mother-version-2" },
-};
-
-static const struct gpio visstrim_m10_gpios[] __initconst = {
- {
- .gpio = TVP5150_RSTN,
- .flags = GPIOF_DIR_OUT | GPIOF_INIT_HIGH,
- .label = "tvp5150_rstn",
- },
- {
- .gpio = TVP5150_PWDN,
- .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
- .label = "tvp5150_pwdn",
- },
- {
- .gpio = OTG_PHY_CS_GPIO,
- .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
- .label = "usbotg_cs",
- },
- {
- .gpio = AMP_GAIN_0,
- .flags = GPIOF_DIR_OUT,
- .label = "amp-gain-0",
- },
- {
- .gpio = AMP_GAIN_1,
- .flags = GPIOF_DIR_OUT,
- .label = "amp-gain-1",
- },
- {
- .gpio = AMP_MUTE_SDL,
- .flags = GPIOF_DIR_OUT,
- .label = "amp-mute-sdl",
- },
- {
- .gpio = AMP_MUTE_SDR,
- .flags = GPIOF_DIR_OUT,
- .label = "amp-mute-sdr",
- },
-};
-
-/* Camera */
-static struct mx2_camera_platform_data visstrim_camera = {
- .flags = MX2_CAMERA_CCIR | MX2_CAMERA_CCIR_INTERLACE |
- MX2_CAMERA_PCLK_SAMPLE_RISING,
- .clk = 100000,
-};
-
-static phys_addr_t mx2_camera_base __initdata;
-#define MX2_CAMERA_BUF_SIZE SZ_8M
-
-static void __init visstrim_analog_camera_init(void)
-{
- struct platform_device *pdev;
-
- gpio_set_value(TVP5150_PWDN, 1);
- ndelay(1);
- gpio_set_value(TVP5150_RSTN, 0);
- ndelay(500);
- gpio_set_value(TVP5150_RSTN, 1);
- ndelay(200000);
-
- pdev = imx27_add_mx2_camera(&visstrim_camera);
- if (IS_ERR(pdev))
- return;
-
- dma_declare_coherent_memory(&pdev->dev, mx2_camera_base,
- mx2_camera_base, MX2_CAMERA_BUF_SIZE);
-}
-
-static void __init visstrim_reserve(void)
-{
- /* reserve 4 MiB for mx2-camera */
- mx2_camera_base = arm_memblock_steal(3 * MX2_CAMERA_BUF_SIZE,
- MX2_CAMERA_BUF_SIZE);
-}
-
-/* GPIOs used as events for applications */
-static struct gpio_keys_button visstrim_gpio_keys[] = {
- {
- .type = EV_KEY,
- .code = KEY_RESTART,
- .gpio = (GPIO_PORTC + 15),
- .desc = "Default config",
- .active_low = 0,
- .wakeup = 1,
- },
- {
- .type = EV_KEY,
- .code = KEY_RECORD,
- .gpio = (GPIO_PORTF + 14),
- .desc = "Record",
- .active_low = 0,
- .wakeup = 1,
- },
- {
- .type = EV_KEY,
- .code = KEY_STOP,
- .gpio = (GPIO_PORTF + 13),
- .desc = "Stop",
- .active_low = 0,
- .wakeup = 1,
- }
-};
-
-static const struct gpio_keys_platform_data
- visstrim_gpio_keys_platform_data __initconst = {
- .buttons = visstrim_gpio_keys,
- .nbuttons = ARRAY_SIZE(visstrim_gpio_keys),
-};
-
-/* led */
-static const struct gpio_led visstrim_m10_leds[] __initconst = {
- {
- .name = "visstrim:ld0",
- .default_trigger = "nand-disk",
- .gpio = (GPIO_PORTC + 29),
- },
- {
- .name = "visstrim:ld1",
- .default_trigger = "nand-disk",
- .gpio = (GPIO_PORTC + 24),
- },
- {
- .name = "visstrim:ld2",
- .default_trigger = "nand-disk",
- .gpio = (GPIO_PORTC + 28),
- },
- {
- .name = "visstrim:ld3",
- .default_trigger = "nand-disk",
- .gpio = (GPIO_PORTC + 25),
- },
-};
-
-static const struct gpio_led_platform_data visstrim_m10_led_data __initconst = {
- .leds = visstrim_m10_leds,
- .num_leds = ARRAY_SIZE(visstrim_m10_leds),
-};
-
-/* Visstrim_SM10 has a microSD slot connected to sdhc1 */
-static int visstrim_m10_sdhc1_init(struct device *dev,
- irq_handler_t detect_irq, void *data)
-{
- int ret;
-
- ret = request_irq(gpio_to_irq(SDHC1_IRQ_GPIO), detect_irq,
- IRQF_TRIGGER_FALLING, "mmc-detect", data);
- return ret;
-}
-
-static void visstrim_m10_sdhc1_exit(struct device *dev, void *data)
-{
- free_irq(gpio_to_irq(SDHC1_IRQ_GPIO), data);
-}
-
-static const struct imxmmc_platform_data visstrim_m10_sdhc_pdata __initconst = {
- .init = visstrim_m10_sdhc1_init,
- .exit = visstrim_m10_sdhc1_exit,
-};
-
-/* Visstrim_SM10 NOR flash */
-static struct physmap_flash_data visstrim_m10_flash_data = {
- .width = 2,
-};
-
-static struct resource visstrim_m10_flash_resource = {
- .start = 0xc0000000,
- .end = 0xc0000000 + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device visstrim_m10_nor_mtd_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &visstrim_m10_flash_data,
- },
- .num_resources = 1,
- .resource = &visstrim_m10_flash_resource,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
- &visstrim_m10_nor_mtd_device,
-};
-
-/* Visstrim_M10 uses UART0 as console */
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-/* I2C */
-static const struct imxi2c_platform_data visstrim_m10_i2c_data __initconst = {
- .bitrate = 100000,
-};
-
-static struct pca953x_platform_data visstrim_m10_pca9555_pdata = {
- .gpio_base = 240, /* After MX27 internal GPIOs */
- .invert = 0,
-};
-
-static struct aic32x4_pdata visstrim_m10_aic32x4_pdata = {
- .power_cfg = AIC32X4_PWR_MICBIAS_2075_LDOIN |
- AIC32X4_PWR_AVDD_DVDD_WEAK_DISABLE |
- AIC32X4_PWR_AIC32X4_LDO_ENABLE |
- AIC32X4_PWR_CMMODE_LDOIN_RANGE_18_36 |
- AIC32X4_PWR_CMMODE_HP_LDOIN_POWERED,
- .micpga_routing = AIC32X4_MICPGA_ROUTE_LMIC_IN2R_10K |
- AIC32X4_MICPGA_ROUTE_RMIC_IN1L_10K,
- .swapdacs = false,
-};
-
-static struct i2c_board_info visstrim_m10_i2c_devices[] = {
- {
- I2C_BOARD_INFO("pca9555", 0x20),
- .platform_data = &visstrim_m10_pca9555_pdata,
- },
- {
- I2C_BOARD_INFO("tlv320aic32x4", 0x18),
- .platform_data = &visstrim_m10_aic32x4_pdata,
- },
- {
- I2C_BOARD_INFO("m41t00", 0x68),
- }
-};
-
-/* USB OTG */
-static int otg_phy_init(struct platform_device *pdev)
-{
- return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
-}
-
-static const struct mxc_usbh_platform_data
-visstrim_m10_usbotg_pdata __initconst = {
- .init = otg_phy_init,
- .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-};
-
-/* SSI */
-static const struct imx_ssi_platform_data visstrim_m10_ssi_pdata __initconst = {
- .flags = IMX_SSI_DMA | IMX_SSI_SYN,
-};
-
-/* coda */
-
-static void __init visstrim_coda_init(void)
-{
- struct platform_device *pdev;
-
- pdev = imx27_add_coda();
- dma_declare_coherent_memory(&pdev->dev,
- mx2_camera_base + MX2_CAMERA_BUF_SIZE,
- mx2_camera_base + MX2_CAMERA_BUF_SIZE,
- MX2_CAMERA_BUF_SIZE);
-}
-
-/* DMA deinterlace */
-static struct platform_device visstrim_deinterlace = {
- .name = "m2m-deinterlace",
- .id = 0,
-};
-
-static void __init visstrim_deinterlace_init(void)
-{
- int ret = -ENOMEM;
- struct platform_device *pdev = &visstrim_deinterlace;
-
- ret = platform_device_register(pdev);
-
- dma_declare_coherent_memory(&pdev->dev,
- mx2_camera_base + 2 * MX2_CAMERA_BUF_SIZE,
- mx2_camera_base + 2 * MX2_CAMERA_BUF_SIZE,
- MX2_CAMERA_BUF_SIZE);
-}
-
-/* Emma-PrP for format conversion */
-static void __init visstrim_emmaprp_init(void)
-{
- struct platform_device *pdev;
- int ret;
-
- pdev = imx27_add_mx2_emmaprp();
- if (IS_ERR(pdev))
- return;
-
- /*
- * Use the same memory area as the analog camera since both
- * devices are, by nature, exclusive.
- */
- ret = dma_declare_coherent_memory(&pdev->dev,
- mx2_camera_base, mx2_camera_base,
- MX2_CAMERA_BUF_SIZE);
- if (ret)
- pr_err("Failed to declare memory for emmaprp\n");
-}
-
-/* Audio */
-static const struct snd_mx27vis_platform_data snd_mx27vis_pdata __initconst = {
- .amp_gain0_gpio = AMP_GAIN_0,
- .amp_gain1_gpio = AMP_GAIN_1,
- .amp_mutel_gpio = AMP_MUTE_SDL,
- .amp_muter_gpio = AMP_MUTE_SDR,
-};
-
-static void __init visstrim_m10_revision(void)
-{
- int exp_version = 0;
- int mo_version = 0;
- int ret;
-
- ret = gpio_request_array(visstrim_m10_version_gpios,
- ARRAY_SIZE(visstrim_m10_version_gpios));
- if (ret) {
- pr_err("Failed to request version gpios");
- return;
- }
-
- /* Get expansion board version (negative logic) */
- exp_version |= !gpio_get_value(EXPBOARD_BIT2) << 2;
- exp_version |= !gpio_get_value(EXPBOARD_BIT1) << 1;
- exp_version |= !gpio_get_value(EXPBOARD_BIT0);
-
- /* Get mother board version (negative logic) */
- mo_version |= !gpio_get_value(MOTHERBOARD_BIT2) << 2;
- mo_version |= !gpio_get_value(MOTHERBOARD_BIT1) << 1;
- mo_version |= !gpio_get_value(MOTHERBOARD_BIT0);
-
- system_rev = 0x27000;
- system_rev |= (mo_version << MOTHERBOARD_SHIFT);
- system_rev |= (exp_version << EXPBOARD_SHIFT);
-}
-
-static void __init visstrim_m10_board_init(void)
-{
- int ret;
-
- imx27_soc_init();
- visstrim_m10_revision();
-
- ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins,
- ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10");
- if (ret)
- pr_err("Failed to setup pins (%d)\n", ret);
-
- imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata);
- imx27_add_imx_uart0(&uart_pdata);
-
- imx27_add_imx_i2c(0, &visstrim_m10_i2c_data);
- imx27_add_imx_i2c(1, &visstrim_m10_i2c_data);
- i2c_register_board_info(0, visstrim_m10_i2c_devices,
- ARRAY_SIZE(visstrim_m10_i2c_devices));
-
- imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata);
- imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata);
- imx27_add_fec(NULL);
-
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-static void __init visstrim_m10_late_init(void)
-{
- int mo_version, ret;
-
- ret = gpio_request_array(visstrim_m10_gpios,
- ARRAY_SIZE(visstrim_m10_gpios));
- if (ret)
- pr_err("Failed to request gpios (%d)\n", ret);
-
- imx_add_gpio_keys(&visstrim_gpio_keys_platform_data);
-
- imx_add_platform_device("mx27vis", 0, NULL, 0, &snd_mx27vis_pdata,
- sizeof(snd_mx27vis_pdata));
-
- gpio_led_register_device(0, &visstrim_m10_led_data);
-
- /* Use mother board version to decide what video devices we shall use */
- mo_version = (system_rev >> MOTHERBOARD_SHIFT) & VERSION_MASK;
- if (mo_version & 0x1) {
- visstrim_emmaprp_init();
-
- /*
- * Despite not being used, tvp5150 must be
- * powered on to avoid I2C problems. To minimize
- * power consupmtion keep reset enabled.
- */
- gpio_set_value(TVP5150_PWDN, 1);
- ndelay(1);
- gpio_set_value(TVP5150_RSTN, 0);
- } else {
- visstrim_deinterlace_init();
- visstrim_analog_camera_init();
- }
-
- visstrim_coda_init();
-}
-
-static void __init visstrim_m10_timer_init(void)
-{
- mx27_clocks_init((unsigned long)25000000);
-}
-
-MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
- .atag_offset = 0x100,
- .reserve = visstrim_reserve,
- .map_io = mx27_map_io,
- .init_early = imx27_init_early,
- .init_irq = mx27_init_irq,
- .init_time = visstrim_m10_timer_init,
- .init_machine = visstrim_m10_board_init,
- .init_late = visstrim_m10_late_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/mach-imx31.c
index dc69dfe600df..dc69dfe600df 100644
--- a/arch/arm/mach-imx/imx31-dt.c
+++ b/arch/arm/mach-imx/mach-imx31.c
diff --git a/arch/arm/mach-imx/imx35-dt.c b/arch/arm/mach-imx/mach-imx35.c
index ec5c3068715c..ec5c3068715c 100644
--- a/arch/arm/mach-imx/imx35-dt.c
+++ b/arch/arm/mach-imx/mach-imx35.c
diff --git a/arch/arm/mach-imx/mach-imx7ulp.c b/arch/arm/mach-imx/mach-imx7ulp.c
index 128cf4c92aab..445256e6a4a0 100644
--- a/arch/arm/mach-imx/mach-imx7ulp.c
+++ b/arch/arm/mach-imx/mach-imx7ulp.c
@@ -67,6 +67,9 @@ static const char *const imx7ulp_dt_compat[] __initconst = {
static void __init imx7ulp_init_late(void)
{
+ if (IS_ENABLED(CONFIG_ARM_IMX_CPUFREQ_DT))
+ platform_device_register_simple("imx-cpufreq-dt", -1, NULL, 0);
+
imx7ulp_cpuidle_init();
}
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
deleted file mode 100644
index 63f7f78a77af..000000000000
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ /dev/null
@@ -1,291 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * KZM-ARM11-01 support
- * Copyright (C) 2009 Yoichi Yuasa <yuasa@linux-mips.org>
- *
- * based on code for MX31ADS,
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/smsc911x.h>
-#include <linux/types.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/memory.h>
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "devices-imx31.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-
-#define KZM_ARM11_IO_ADDRESS(x) (IOMEM( \
- IMX_IO_P2V_MODULE(x, MX31_CS4) ?: \
- IMX_IO_P2V_MODULE(x, MX31_CS5)) ?: \
- MX31_IO_ADDRESS(x))
-
-/*
- * KZM-ARM11-01 Board Control Registers on FPGA
- */
-#define KZM_ARM11_CTL1 (MX31_CS4_BASE_ADDR + 0x1000)
-#define KZM_ARM11_CTL2 (MX31_CS4_BASE_ADDR + 0x1001)
-#define KZM_ARM11_RSW1 (MX31_CS4_BASE_ADDR + 0x1002)
-#define KZM_ARM11_BACK_LIGHT (MX31_CS4_BASE_ADDR + 0x1004)
-#define KZM_ARM11_FPGA_REV (MX31_CS4_BASE_ADDR + 0x1008)
-#define KZM_ARM11_7SEG_LED (MX31_CS4_BASE_ADDR + 0x1010)
-#define KZM_ARM11_LEDS (MX31_CS4_BASE_ADDR + 0x1020)
-#define KZM_ARM11_DIPSW2 (MX31_CS4_BASE_ADDR + 0x1003)
-
-/*
- * External UART for touch panel on FPGA
- */
-#define KZM_ARM11_16550 (MX31_CS4_BASE_ADDR + 0x1050)
-
-#if IS_ENABLED(CONFIG_SERIAL_8250)
-/*
- * KZM-ARM11-01 has an external UART on FPGA
- */
-static struct plat_serial8250_port serial_platform_data[] = {
- {
- .membase = KZM_ARM11_IO_ADDRESS(KZM_ARM11_16550),
- .mapbase = KZM_ARM11_16550,
- /* irq number is run-time assigned */
- .irqflags = IRQ_TYPE_EDGE_RISING,
- .uartclk = 14745600,
- .regshift = 0,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
- UPF_BUGGY_UART,
- },
- {},
-};
-
-static struct resource serial8250_resources[] = {
- {
- .start = KZM_ARM11_16550,
- .end = KZM_ARM11_16550 + 0x10,
- .flags = IORESOURCE_MEM,
- },
- {
- /* irq number is run-time assigned */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
- },
- .num_resources = ARRAY_SIZE(serial8250_resources),
- .resource = serial8250_resources,
-};
-
-static int __init kzm_init_ext_uart(void)
-{
- u8 tmp;
-
- /*
- * GPIO 1-1: external UART interrupt line
- */
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO));
- gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "ext-uart-int");
- gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
-
- /*
- * Unmask UART interrupt
- */
- tmp = __raw_readb(KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
- tmp |= 0x2;
- __raw_writeb(tmp, KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
-
- serial_platform_data[0].irq =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
- serial8250_resources[1].start =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
- serial8250_resources[1].end =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
-
- return platform_device_register(&serial_device);
-}
-#else
-static inline int kzm_init_ext_uart(void)
-{
- return 0;
-}
-#endif
-
-/*
- * SMSC LAN9118
- */
-#if IS_ENABLED(CONFIG_SMSC911X)
-static struct smsc911x_platform_config kzm_smsc9118_config = {
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-};
-
-static struct resource kzm_smsc9118_resources[] = {
- {
- .start = MX31_CS5_BASE_ADDR,
- .end = MX31_CS5_BASE_ADDR + SZ_128K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- /* irq number is run-time assigned */
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
- },
-};
-
-static struct platform_device kzm_smsc9118_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(kzm_smsc9118_resources),
- .resource = kzm_smsc9118_resources,
- .dev = {
- .platform_data = &kzm_smsc9118_config,
- },
-};
-
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
-};
-
-static int __init kzm_init_smsc9118(void)
-{
- /*
- * GPIO 1-2: SMSC9118 interrupt line
- */
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO));
- gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2), "smsc9118-int");
- gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2));
-
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- kzm_smsc9118_resources[1].start =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2));
- kzm_smsc9118_resources[1].end =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2));
-
- return platform_device_register(&kzm_smsc9118_device);
-}
-#else
-static inline int kzm_init_smsc9118(void)
-{
- return 0;
-}
-#endif
-
-#if IS_ENABLED(CONFIG_SERIAL_IMX)
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static void __init kzm_init_imx_uart(void)
-{
- imx31_add_imx_uart0(&uart_pdata);
- imx31_add_imx_uart1(&uart_pdata);
-}
-#else
-static inline void kzm_init_imx_uart(void)
-{
-}
-#endif
-
-static int kzm_pins[] __initdata = {
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1,
- MX31_PIN_DCD_DCE1__DCD_DCE1,
- MX31_PIN_RI_DCE1__RI_DCE1,
- MX31_PIN_DSR_DCE1__DSR_DCE1,
- MX31_PIN_DTR_DCE1__DTR_DCE1,
- MX31_PIN_CTS2__CTS2,
- MX31_PIN_RTS2__RTS2,
- MX31_PIN_TXD2__TXD2,
- MX31_PIN_RXD2__RXD2,
- MX31_PIN_DCD_DTE1__DCD_DTE2,
- MX31_PIN_RI_DTE1__RI_DTE2,
- MX31_PIN_DSR_DTE1__DSR_DTE2,
- MX31_PIN_DTR_DTE1__DTR_DTE2,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init kzm_board_init(void)
-{
- imx31_soc_init();
-
- mxc_iomux_setup_multiple_pins(kzm_pins,
- ARRAY_SIZE(kzm_pins), "kzm");
- kzm_init_imx_uart();
-
- pr_info("Clock input source is 26MHz\n");
-}
-
-static void __init kzm_late_init(void)
-{
- kzm_init_ext_uart();
- kzm_init_smsc9118();
-}
-
-/*
- * This structure defines static mappings for the kzm-arm11-01 board.
- */
-static struct map_desc kzm_io_desc[] __initdata = {
- {
- .virtual = (unsigned long)MX31_CS4_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
- .length = MX31_CS4_SIZE,
- .type = MT_DEVICE
- },
- {
- .virtual = (unsigned long)MX31_CS5_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
- .length = MX31_CS5_SIZE,
- .type = MT_DEVICE
- },
-};
-
-/*
- * Set up static virtual mappings.
- */
-static void __init kzm_map_io(void)
-{
- mx31_map_io();
- iotable_init(kzm_io_desc, ARRAY_SIZE(kzm_io_desc));
-}
-
-static void __init kzm_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
- .atag_offset = 0x100,
- .map_io = kzm_map_io,
- .init_early = imx31_init_early,
- .init_irq = mx31_init_irq,
- .init_time = kzm_timer_init,
- .init_machine = kzm_board_init,
- .init_late = kzm_late_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
deleted file mode 100644
index ec011e89eb9e..000000000000
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ /dev/null
@@ -1,338 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/physmap.h>
-#include <linux/gpio/driver.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "devices-imx21.h"
-#include "hardware.h"
-#include "iomux-mx21.h"
-
-#define MX21ADS_CS8900A_REG (MX21_CS1_BASE_ADDR + 0x000000)
-#define MX21ADS_ST16C255_IOBASE_REG (MX21_CS1_BASE_ADDR + 0x200000)
-#define MX21ADS_VERSION_REG (MX21_CS1_BASE_ADDR + 0x400000)
-#define MX21ADS_IO_REG (MX21_CS1_BASE_ADDR + 0x800000)
-
-#define MX21ADS_MMC_CD IMX_GPIO_NR(4, 25)
-#define MX21ADS_CS8900A_IRQ_GPIO IMX_GPIO_NR(5, 11)
-#define MX21ADS_MMGPIO_BASE (6 * 32)
-
-/* MX21ADS_IO_REG bit definitions */
-#define MX21ADS_IO_SD_WP (MX21ADS_MMGPIO_BASE + 0)
-#define MX21ADS_IO_TP6 (MX21ADS_IO_SD_WP)
-#define MX21ADS_IO_SW_SEL (MX21ADS_MMGPIO_BASE + 1)
-#define MX21ADS_IO_TP7 (MX21ADS_IO_SW_SEL)
-#define MX21ADS_IO_RESET_E_UART (MX21ADS_MMGPIO_BASE + 2)
-#define MX21ADS_IO_RESET_BASE (MX21ADS_MMGPIO_BASE + 3)
-#define MX21ADS_IO_CSI_CTL2 (MX21ADS_MMGPIO_BASE + 4)
-#define MX21ADS_IO_CSI_CTL1 (MX21ADS_MMGPIO_BASE + 5)
-#define MX21ADS_IO_CSI_CTL0 (MX21ADS_MMGPIO_BASE + 6)
-#define MX21ADS_IO_UART1_EN (MX21ADS_MMGPIO_BASE + 7)
-#define MX21ADS_IO_UART4_EN (MX21ADS_MMGPIO_BASE + 8)
-#define MX21ADS_IO_LCDON (MX21ADS_MMGPIO_BASE + 9)
-#define MX21ADS_IO_IRDA_EN (MX21ADS_MMGPIO_BASE + 10)
-#define MX21ADS_IO_IRDA_FIR_SEL (MX21ADS_MMGPIO_BASE + 11)
-#define MX21ADS_IO_IRDA_MD0_B (MX21ADS_MMGPIO_BASE + 12)
-#define MX21ADS_IO_IRDA_MD1 (MX21ADS_MMGPIO_BASE + 13)
-#define MX21ADS_IO_LED4_ON (MX21ADS_MMGPIO_BASE + 14)
-#define MX21ADS_IO_LED3_ON (MX21ADS_MMGPIO_BASE + 15)
-
-static const int mx21ads_pins[] __initconst = {
-
- /* CS8900A */
- (GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11),
-
- /* UART1 */
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS,
-
- /* UART3 (IrDA) - only TXD and RXD */
- PE8_PF_UART3_TXD,
- PE9_PF_UART3_RXD,
-
- /* UART4 */
- PB26_AF_UART4_RTS,
- PB28_AF_UART4_TXD,
- PB29_AF_UART4_CTS,
- PB31_AF_UART4_RXD,
-
- /* LCDC */
- PA5_PF_LSCLK,
- PA6_PF_LD0,
- PA7_PF_LD1,
- PA8_PF_LD2,
- PA9_PF_LD3,
- PA10_PF_LD4,
- PA11_PF_LD5,
- PA12_PF_LD6,
- PA13_PF_LD7,
- PA14_PF_LD8,
- PA15_PF_LD9,
- PA16_PF_LD10,
- PA17_PF_LD11,
- PA18_PF_LD12,
- PA19_PF_LD13,
- PA20_PF_LD14,
- PA21_PF_LD15,
- PA22_PF_LD16,
- PA24_PF_REV, /* Sharp panel dedicated signal */
- PA25_PF_CLS, /* Sharp panel dedicated signal */
- PA26_PF_PS, /* Sharp panel dedicated signal */
- PA27_PF_SPL_SPR, /* Sharp panel dedicated signal */
- PA28_PF_HSYNC,
- PA29_PF_VSYNC,
- PA30_PF_CONTRAST,
- PA31_PF_OE_ACD,
-
- /* MMC/SDHC */
- PE18_PF_SD1_D0,
- PE19_PF_SD1_D1,
- PE20_PF_SD1_D2,
- PE21_PF_SD1_D3,
- PE22_PF_SD1_CMD,
- PE23_PF_SD1_CLK,
-
- /* NFC */
- PF0_PF_NRFB,
- PF1_PF_NFCE,
- PF2_PF_NFWP,
- PF3_PF_NFCLE,
- PF4_PF_NFALE,
- PF5_PF_NFRE,
- PF6_PF_NFWE,
- PF7_PF_NFIO0,
- PF8_PF_NFIO1,
- PF9_PF_NFIO2,
- PF10_PF_NFIO3,
- PF11_PF_NFIO4,
- PF12_PF_NFIO5,
- PF13_PF_NFIO6,
- PF14_PF_NFIO7,
-};
-
-/* ADS's NOR flash: 2x AM29BDS128HE9VKI on 32-bit bus */
-static struct physmap_flash_data mx21ads_flash_data = {
- .width = 4,
-};
-
-static struct resource mx21ads_flash_resource =
- DEFINE_RES_MEM(MX21_CS0_BASE_ADDR, SZ_32M);
-
-static struct platform_device mx21ads_nor_mtd_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &mx21ads_flash_data,
- },
- .num_resources = 1,
- .resource = &mx21ads_flash_resource,
-};
-
-static struct resource mx21ads_cs8900_resources[] __initdata = {
- DEFINE_RES_MEM(MX21ADS_CS8900A_REG, SZ_1K),
- /* irq number is run-time assigned */
- DEFINE_RES_IRQ(-1),
-};
-
-static const struct platform_device_info mx21ads_cs8900_devinfo __initconst = {
- .name = "cs89x0",
- .id = 0,
- .res = mx21ads_cs8900_resources,
- .num_res = ARRAY_SIZE(mx21ads_cs8900_resources),
-};
-
-static const struct imxuart_platform_data uart_pdata_rts __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxuart_platform_data uart_pdata_norts __initconst = {
-};
-
-static struct resource mx21ads_mmgpio_resource =
- DEFINE_RES_MEM_NAMED(MX21ADS_IO_REG, SZ_2, "dat");
-
-static struct bgpio_pdata mx21ads_mmgpio_pdata = {
- .label = "mx21ads-mmgpio",
- .base = MX21ADS_MMGPIO_BASE,
- .ngpio = 16,
-};
-
-static struct platform_device mx21ads_mmgpio = {
- .name = "basic-mmio-gpio",
- .id = PLATFORM_DEVID_AUTO,
- .resource = &mx21ads_mmgpio_resource,
- .num_resources = 1,
- .dev = {
- .platform_data = &mx21ads_mmgpio_pdata,
- },
-};
-
-static struct regulator_consumer_supply mx21ads_lcd_regulator_consumer =
- REGULATOR_SUPPLY("lcd", "imx-fb.0");
-
-static struct regulator_init_data mx21ads_lcd_regulator_init_data = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .consumer_supplies = &mx21ads_lcd_regulator_consumer,
- .num_consumer_supplies = 1,
-};
-
-static struct fixed_voltage_config mx21ads_lcd_regulator_pdata = {
- .supply_name = "LCD",
- .microvolts = 3300000,
- .init_data = &mx21ads_lcd_regulator_init_data,
-};
-
-static struct platform_device mx21ads_lcd_regulator = {
- .name = "reg-fixed-voltage",
- .id = PLATFORM_DEVID_AUTO,
- .dev = {
- .platform_data = &mx21ads_lcd_regulator_pdata,
- },
-};
-
-static struct gpiod_lookup_table mx21ads_lcd_regulator_gpiod_table = {
- .dev_id = "reg-fixed-voltage.0", /* Let's hope ID 0 is what we get */
- .table = {
- GPIO_LOOKUP("mx21ads-mmgpio", 9, NULL, GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-/*
- * Connected is a portrait Sharp-QVGA display
- * of type: LQ035Q7DB02
- */
-static struct imx_fb_videomode mx21ads_modes[] = {
- {
- .mode = {
- .name = "Sharp-LQ035Q7",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 188679, /* in ps (5.3MHz) */
- .hsync_len = 2,
- .left_margin = 6,
- .right_margin = 16,
- .vsync_len = 1,
- .upper_margin = 8,
- .lower_margin = 10,
- },
- .pcr = 0xfb108bc7,
- .bpp = 16,
- },
-};
-
-static const struct imx_fb_platform_data mx21ads_fb_data __initconst = {
- .mode = mx21ads_modes,
- .num_modes = ARRAY_SIZE(mx21ads_modes),
-
- .pwmr = 0x00a903ff,
- .lscr1 = 0x00120300,
- .dmacr = 0x00020008,
-};
-
-static int mx21ads_sdhc_get_ro(struct device *dev)
-{
- return gpio_get_value(MX21ADS_IO_SD_WP);
-}
-
-static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
- void *data)
-{
- int ret;
-
- ret = gpio_request(MX21ADS_IO_SD_WP, "mmc-ro");
- if (ret)
- return ret;
-
- return request_irq(gpio_to_irq(MX21ADS_MMC_CD), detect_irq,
- IRQF_TRIGGER_FALLING, "mmc-detect", data);
-}
-
-static void mx21ads_sdhc_exit(struct device *dev, void *data)
-{
- free_irq(gpio_to_irq(MX21ADS_MMC_CD), data);
- gpio_free(MX21ADS_IO_SD_WP);
-}
-
-static const struct imxmmc_platform_data mx21ads_sdhc_pdata __initconst = {
- .ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31, /* 3.0V */
- .get_ro = mx21ads_sdhc_get_ro,
- .init = mx21ads_sdhc_init,
- .exit = mx21ads_sdhc_exit,
-};
-
-static const struct mxc_nand_platform_data
-mx21ads_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
- &mx21ads_mmgpio,
- &mx21ads_lcd_regulator,
- &mx21ads_nor_mtd_device,
-};
-
-static void __init mx21ads_board_init(void)
-{
- imx21_soc_init();
-
- mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
- "mx21ads");
-
- imx21_add_imx_uart0(&uart_pdata_rts);
- imx21_add_imx_uart2(&uart_pdata_norts);
- imx21_add_imx_uart3(&uart_pdata_rts);
- imx21_add_mxc_nand(&mx21ads_nand_board_info);
-
- imx21_add_imx_fb(&mx21ads_fb_data);
-}
-
-static void __init mx21ads_late_init(void)
-{
- imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata);
-
- gpiod_add_lookup_table(&mx21ads_lcd_regulator_gpiod_table);
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
- mx21ads_cs8900_resources[1].start =
- gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO);
- mx21ads_cs8900_resources[1].end =
- gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO);
- platform_device_register_full(&mx21ads_cs8900_devinfo);
-}
-
-static void __init mx21ads_timer_init(void)
-{
- mx21_clocks_init(32768, 26000000);
-}
-
-MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
- /* maintainer: Freescale Semiconductor, Inc. */
- .atag_offset = 0x100,
- .map_io = mx21_map_io,
- .init_early = imx21_init_early,
- .init_irq = mx21_init_irq,
- .init_time = mx21ads_timer_init,
- .init_machine = mx21ads_board_init,
- .init_late = mx21ads_late_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
deleted file mode 100644
index 2db4475b7f85..000000000000
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ /dev/null
@@ -1,470 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- */
-
-/*
- * This machine is known as:
- * - i.MX27 3-Stack Development System
- * - i.MX27 Platform Development Kit (i.MX27 PDK)
- */
-
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/irq.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <linux/delay.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/spi/spi.h>
-#include <linux/regulator/machine.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "3ds_debugboard.h"
-#include "common.h"
-#include "devices-imx27.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx27.h"
-#include "ulpi.h"
-
-#define SD1_EN_GPIO IMX_GPIO_NR(2, 25)
-#define OTG_PHY_RESET_GPIO IMX_GPIO_NR(2, 23)
-#define SPI2_SS0 IMX_GPIO_NR(4, 21)
-#define PMIC_INT IMX_GPIO_NR(3, 14)
-#define SPI1_SS0 IMX_GPIO_NR(4, 28)
-#define SD1_CD IMX_GPIO_NR(2, 26)
-#define LCD_RESET IMX_GPIO_NR(1, 3)
-#define LCD_ENABLE IMX_GPIO_NR(1, 31)
-
-static const int mx27pdk_pins[] __initconst = {
- /* UART1 */
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS,
- /* FEC */
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN,
- /* SDHC1 */
- PE18_PF_SD1_D0,
- PE19_PF_SD1_D1,
- PE20_PF_SD1_D2,
- PE21_PF_SD1_D3,
- PE22_PF_SD1_CMD,
- PE23_PF_SD1_CLK,
- SD1_EN_GPIO | GPIO_GPIO | GPIO_OUT,
- /* OTG */
- OTG_PHY_RESET_GPIO | GPIO_GPIO | GPIO_OUT,
- PC7_PF_USBOTG_DATA5,
- PC8_PF_USBOTG_DATA6,
- PC9_PF_USBOTG_DATA0,
- PC10_PF_USBOTG_DATA2,
- PC11_PF_USBOTG_DATA1,
- PC12_PF_USBOTG_DATA4,
- PC13_PF_USBOTG_DATA3,
- PE0_PF_USBOTG_NXT,
- PE1_PF_USBOTG_STP,
- PE2_PF_USBOTG_DIR,
- PE24_PF_USBOTG_CLK,
- PE25_PF_USBOTG_DATA7,
- /* CSPI1 */
- PD31_PF_CSPI1_MOSI,
- PD30_PF_CSPI1_MISO,
- PD29_PF_CSPI1_SCLK,
- PD25_PF_CSPI1_RDY,
- SPI1_SS0 | GPIO_GPIO | GPIO_OUT,
- /* CSPI2 */
- PD22_PF_CSPI2_SCLK,
- PD23_PF_CSPI2_MISO,
- PD24_PF_CSPI2_MOSI,
- SPI2_SS0 | GPIO_GPIO | GPIO_OUT,
- /* I2C1 */
- PD17_PF_I2C_DATA,
- PD18_PF_I2C_CLK,
- /* PMIC INT */
- PMIC_INT | GPIO_GPIO | GPIO_IN,
- /* LCD */
- PA5_PF_LSCLK,
- PA6_PF_LD0,
- PA7_PF_LD1,
- PA8_PF_LD2,
- PA9_PF_LD3,
- PA10_PF_LD4,
- PA11_PF_LD5,
- PA12_PF_LD6,
- PA13_PF_LD7,
- PA14_PF_LD8,
- PA15_PF_LD9,
- PA16_PF_LD10,
- PA17_PF_LD11,
- PA18_PF_LD12,
- PA19_PF_LD13,
- PA20_PF_LD14,
- PA21_PF_LD15,
- PA22_PF_LD16,
- PA23_PF_LD17,
- PA28_PF_HSYNC,
- PA29_PF_VSYNC,
- PA30_PF_CONTRAST,
- LCD_ENABLE | GPIO_GPIO | GPIO_OUT,
- LCD_RESET | GPIO_GPIO | GPIO_OUT,
- /* SSI4 */
- PC16_PF_SSI4_FS,
- PC17_PF_SSI4_RXD,
- PC18_PF_SSI4_TXD,
- PC19_PF_SSI4_CLK,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-/*
- * Matrix keyboard
- */
-
-static const uint32_t mx27_3ds_keymap[] = {
- KEY(0, 0, KEY_UP),
- KEY(0, 1, KEY_DOWN),
- KEY(1, 0, KEY_RIGHT),
- KEY(1, 1, KEY_LEFT),
- KEY(1, 2, KEY_ENTER),
- KEY(2, 0, KEY_F6),
- KEY(2, 1, KEY_F8),
- KEY(2, 2, KEY_F9),
- KEY(2, 3, KEY_F10),
-};
-
-static const struct matrix_keymap_data mx27_3ds_keymap_data __initconst = {
- .keymap = mx27_3ds_keymap,
- .keymap_size = ARRAY_SIZE(mx27_3ds_keymap),
-};
-
-static int mx27_3ds_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
- void *data)
-{
- return request_irq(gpio_to_irq(SD1_CD), detect_irq,
- IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
-}
-
-static void mx27_3ds_sdhc1_exit(struct device *dev, void *data)
-{
- free_irq(gpio_to_irq(SD1_CD), data);
-}
-
-static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
- .init = mx27_3ds_sdhc1_init,
- .exit = mx27_3ds_sdhc1_exit,
-};
-
-static void mx27_3ds_sdhc1_enable_level_translator(void)
-{
- /* Turn on TXB0108 OE pin */
- gpio_request(SD1_EN_GPIO, "sd1_enable");
- gpio_direction_output(SD1_EN_GPIO, 1);
-}
-
-
-static int otg_phy_init(void)
-{
- gpio_request(OTG_PHY_RESET_GPIO, "usb-otg-reset");
- gpio_direction_output(OTG_PHY_RESET_GPIO, 0);
- mdelay(1);
- gpio_set_value(OTG_PHY_RESET_GPIO, 1);
- return 0;
-}
-
-static int mx27_3ds_otg_init(struct platform_device *pdev)
-{
- return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
- .init = mx27_3ds_otg_init,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_ULPI,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init mx27_3ds_otg_mode(char *options)
-{
- if (!strcmp(options, "host"))
- otg_mode_host = true;
- else if (!strcmp(options, "device"))
- otg_mode_host = false;
- else
- pr_info("otg_mode neither \"host\" nor \"device\". "
- "Defaulting to device\n");
- return 1;
-}
-__setup("otg_mode=", mx27_3ds_otg_mode);
-
-/* Regulators */
-static struct regulator_init_data gpo_init = {
- .constraints = {
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_consumer_supply vmmc1_consumers[] = {
- REGULATOR_SUPPLY("vcore", "spi0.0"),
-};
-
-static struct regulator_init_data vmmc1_init = {
- .constraints = {
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers),
- .consumer_supplies = vmmc1_consumers,
-};
-
-static struct regulator_consumer_supply vgen_consumers[] = {
- REGULATOR_SUPPLY("vdd", "spi0.0"),
-};
-
-static struct regulator_init_data vgen_init = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = ARRAY_SIZE(vgen_consumers),
- .consumer_supplies = vgen_consumers,
-};
-
-static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = {
- {
- .id = MC13783_REG_VMMC1,
- .init_data = &vmmc1_init,
- }, {
- .id = MC13783_REG_VGEN,
- .init_data = &vgen_init,
- }, {
- .id = MC13783_REG_GPO1, /* Turn on 1.8V */
- .init_data = &gpo_init,
- }, {
- .id = MC13783_REG_GPO3, /* Turn on 3.3V */
- .init_data = &gpo_init,
- },
-};
-
-/* MC13783 */
-static struct mc13xxx_codec_platform_data mx27_3ds_codec = {
- .dac_ssi_port = MC13783_SSI1_PORT,
- .adc_ssi_port = MC13783_SSI1_PORT,
-};
-
-static struct mc13xxx_platform_data mc13783_pdata = {
- .regulators = {
- .regulators = mx27_3ds_regulators,
- .num_regulators = ARRAY_SIZE(mx27_3ds_regulators),
-
- },
- .flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC |
- MC13XXX_USE_CODEC,
- .codec = &mx27_3ds_codec,
-};
-
-static struct imx_ssi_platform_data mx27_3ds_ssi_pdata = {
- .flags = IMX_SSI_DMA | IMX_SSI_NET,
-};
-
-/* SPI */
-static struct gpiod_lookup_table mx27_spi1_gpiod_table = {
- .dev_id = "imx27-cspi.0", /* Actual device name for spi1 */
- .table = {
- /*
- * The i.MX27 has the i.MX21 GPIO controller, the SPI1 CS GPIO
- * SPI1_SS0 is numbered IMX_GPIO_NR(4, 28).
- *
- * This is in "bank 4" which is subtracted by one in the macro
- * so this is actually bank 3 on "imx21-gpio.3".
- */
- GPIO_LOOKUP_IDX("imx21-gpio.3", 28, "cs", 0, GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-static struct gpiod_lookup_table mx27_spi2_gpiod_table = {
- .dev_id = "imx27-cspi.1", /* Actual device name for spi2 */
- .table = {
- /*
- * The i.MX27 has the i.MX21 GPIO controller, the SPI2 CS GPIO
- * SPI2_SS0 is numbered IMX_GPIO_NR(4, 21).
- *
- * This is in "bank 4" which is subtracted by one in the macro
- * so this is actually bank 3 on "imx21-gpio.3".
- */
- GPIO_LOOKUP_IDX("imx21-gpio.3", 21, "cs", 0, GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-static struct imx_fb_videomode mx27_3ds_modes[] = {
- { /* 480x640 @ 60 Hz */
- .mode = {
- .name = "Epson-VGA",
- .refresh = 60,
- .xres = 480,
- .yres = 640,
- .pixclock = 41701,
- .left_margin = 20,
- .right_margin = 41,
- .upper_margin = 10,
- .lower_margin = 5,
- .hsync_len = 20,
- .vsync_len = 10,
- .sync = FB_SYNC_OE_ACT_HIGH |
- FB_SYNC_CLK_INVERT,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- },
- .bpp = 16,
- .pcr = 0xFAC08B82,
- },
-};
-
-static const struct imx_fb_platform_data mx27_3ds_fb_data __initconst = {
- .mode = mx27_3ds_modes,
- .num_modes = ARRAY_SIZE(mx27_3ds_modes),
- .pwmr = 0x00A903FF,
- .lscr1 = 0x00120300,
- .dmacr = 0x00020010,
-};
-
-/* LCD */
-static struct gpiod_lookup_table mx27_3ds_lcd_gpiod_table = {
- .dev_id = "spi0.0", /* Bus 0 chipselect 0 */
- .table = {
- /*
- * The i.MX27 has the i.MX21 GPIO controller, the GPIOs
- * numbered IMX_GPIO_NR(1, 3) and IMX_GPIO_NR(1, 31)
- * are in "bank 1" which is subtracted by one in the macro
- * so these are actually bank 0 on "imx21-gpio.0".
- */
- GPIO_LOOKUP("imx21-gpio.0", 3, "reset", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("imx21-gpio.0", 31, "enable", GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
- {
- .modalias = "mc13783",
- .max_speed_hz = 1000000,
- .bus_num = 1,
- .chip_select = 0, /* SS0 */
- .platform_data = &mc13783_pdata,
- /* irq number is run-time assigned */
- .mode = SPI_CS_HIGH,
- }, {
- .modalias = "l4f00242t03",
- .max_speed_hz = 5000000,
- .bus_num = 0,
- .chip_select = 0, /* SS0 */
- },
-};
-
-static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = {
- .bitrate = 100000,
-};
-
-static void __init mx27pdk_init(void)
-{
- imx27_soc_init();
-
- mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
- "mx27pdk");
- imx27_add_imx_uart0(&uart_pdata);
- imx27_add_fec(NULL);
- imx27_add_imx_keypad(&mx27_3ds_keymap_data);
- imx27_add_imx2_wdt();
-
- imx27_add_spi_imx1(&mx27_spi2_gpiod_table);
- imx27_add_spi_imx0(&mx27_spi1_gpiod_table);
-
- imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
- imx27_add_imx_fb(&mx27_3ds_fb_data);
-
- imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata);
-}
-
-static void __init mx27pdk_late_init(void)
-{
- mx27_3ds_sdhc1_enable_level_translator();
- imx27_add_mxc_mmc(0, &sdhc1_pdata);
-
- otg_phy_init();
-
- if (otg_mode_host) {
- otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT);
-
- if (otg_pdata.otg)
- imx27_add_mxc_ehci_otg(&otg_pdata);
- }
-
- if (!otg_mode_host)
- imx27_add_fsl_usb2_udc(&otg_device_pdata);
-
- gpiod_add_lookup_table(&mx27_3ds_lcd_gpiod_table);
- mx27_3ds_spi_devs[0].irq = gpio_to_irq(PMIC_INT);
- spi_register_board_info(mx27_3ds_spi_devs,
- ARRAY_SIZE(mx27_3ds_spi_devs));
-
- if (mxc_expio_init(MX27_CS5_BASE_ADDR, IMX_GPIO_NR(3, 28)))
- pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
-
-
- imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
-}
-
-static void __init mx27pdk_timer_init(void)
-{
- mx27_clocks_init(26000000);
-}
-
-MACHINE_START(MX27_3DS, "Freescale MX27PDK")
- /* maintainer: Freescale Semiconductor, Inc. */
- .atag_offset = 0x100,
- .map_io = mx27_map_io,
- .init_early = imx27_init_early,
- .init_irq = mx27_init_irq,
- .init_time = mx27pdk_timer_init,
- .init_machine = mx27pdk_init,
- .init_late = mx27pdk_late_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
deleted file mode 100644
index ba202f95bcdf..000000000000
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ /dev/null
@@ -1,407 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-#include <linux/gpio/driver.h>
-/* Needed for gpio_to_irq() */
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx27.h"
-#include "hardware.h"
-#include "iomux-mx27.h"
-
-/*
- * Base address of PBC controller, CS4
- */
-#define PBC_BASE_ADDRESS 0xf4300000
-#define PBC_REG_ADDR(offset) (void __force __iomem *) \
- (PBC_BASE_ADDRESS + (offset))
-
-/* When the PBC address connection is fixed in h/w, defined as 1 */
-#define PBC_ADDR_SH 0
-
-/* Offsets for the PBC Controller register */
-/*
- * PBC Board version register offset
- */
-#define PBC_VERSION_REG PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 1 set address.
- */
-#define PBC_BCTRL1_SET_REG PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 1 clear address.
- */
-#define PBC_BCTRL1_CLEAR_REG PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
-
-/* PBC Board Control Register 1 bit definitions */
-#define PBC_BCTRL1_LCDON 0x0800 /* Enable the LCD */
-
-/* to determine the correct external crystal reference */
-#define CKIH_27MHZ_BIT_SET (1 << 3)
-
-static const int mx27ads_pins[] __initconst = {
- /* UART0 */
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS,
- /* UART1 */
- PE3_PF_UART2_CTS,
- PE4_PF_UART2_RTS,
- PE6_PF_UART2_TXD,
- PE7_PF_UART2_RXD,
- /* UART2 */
- PE8_PF_UART3_TXD,
- PE9_PF_UART3_RXD,
- PE10_PF_UART3_CTS,
- PE11_PF_UART3_RTS,
- /* UART3 */
- PB26_AF_UART4_RTS,
- PB28_AF_UART4_TXD,
- PB29_AF_UART4_CTS,
- PB31_AF_UART4_RXD,
- /* UART4 */
- PB18_AF_UART5_TXD,
- PB19_AF_UART5_RXD,
- PB20_AF_UART5_CTS,
- PB21_AF_UART5_RTS,
- /* UART5 */
- PB10_AF_UART6_TXD,
- PB12_AF_UART6_CTS,
- PB11_AF_UART6_RXD,
- PB13_AF_UART6_RTS,
- /* FEC */
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN,
- /* I2C2 */
- PC5_PF_I2C2_SDA,
- PC6_PF_I2C2_SCL,
- /* FB */
- PA5_PF_LSCLK,
- PA6_PF_LD0,
- PA7_PF_LD1,
- PA8_PF_LD2,
- PA9_PF_LD3,
- PA10_PF_LD4,
- PA11_PF_LD5,
- PA12_PF_LD6,
- PA13_PF_LD7,
- PA14_PF_LD8,
- PA15_PF_LD9,
- PA16_PF_LD10,
- PA17_PF_LD11,
- PA18_PF_LD12,
- PA19_PF_LD13,
- PA20_PF_LD14,
- PA21_PF_LD15,
- PA22_PF_LD16,
- PA23_PF_LD17,
- PA24_PF_REV,
- PA25_PF_CLS,
- PA26_PF_PS,
- PA27_PF_SPL_SPR,
- PA28_PF_HSYNC,
- PA29_PF_VSYNC,
- PA30_PF_CONTRAST,
- PA31_PF_OE_ACD,
- /* OWIRE */
- PE16_AF_OWIRE,
- /* SDHC1*/
- PE18_PF_SD1_D0,
- PE19_PF_SD1_D1,
- PE20_PF_SD1_D2,
- PE21_PF_SD1_D3,
- PE22_PF_SD1_CMD,
- PE23_PF_SD1_CLK,
- /* SDHC2*/
- PB4_PF_SD2_D0,
- PB5_PF_SD2_D1,
- PB6_PF_SD2_D2,
- PB7_PF_SD2_D3,
- PB8_PF_SD2_CMD,
- PB9_PF_SD2_CLK,
-};
-
-static const struct mxc_nand_platform_data
-mx27ads_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-/* ADS's NOR flash */
-static struct physmap_flash_data mx27ads_flash_data = {
- .width = 2,
-};
-
-static struct resource mx27ads_flash_resource = {
- .start = 0xc0000000,
- .end = 0xc0000000 + 0x02000000 - 1,
- .flags = IORESOURCE_MEM,
-
-};
-
-static struct platform_device mx27ads_nor_mtd_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &mx27ads_flash_data,
- },
- .num_resources = 1,
- .resource = &mx27ads_flash_resource,
-};
-
-static const struct imxi2c_platform_data mx27ads_i2c1_data __initconst = {
- .bitrate = 100000,
-};
-
-static struct i2c_board_info mx27ads_i2c_devices[] = {
-};
-
-static void vgpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
- if (value)
- imx_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
- else
- imx_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
-}
-
-static int vgpio_dir_out(struct gpio_chip *chip, unsigned offset, int value)
-{
- return 0;
-}
-
-#define MX27ADS_LCD_GPIO (6 * 32)
-
-static struct regulator_consumer_supply mx27ads_lcd_regulator_consumer =
- REGULATOR_SUPPLY("lcd", "imx-fb.0");
-
-static struct regulator_init_data mx27ads_lcd_regulator_init_data = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
-},
- .consumer_supplies = &mx27ads_lcd_regulator_consumer,
- .num_consumer_supplies = 1,
-};
-
-static struct fixed_voltage_config mx27ads_lcd_regulator_pdata = {
- .supply_name = "LCD",
- .microvolts = 3300000,
- .init_data = &mx27ads_lcd_regulator_init_data,
-};
-
-static struct gpiod_lookup_table mx27ads_lcd_regulator_gpiod_table = {
- .dev_id = "reg-fixed-voltage.0", /* Let's hope ID 0 is what we get */
- .table = {
- GPIO_LOOKUP("LCD", 0, NULL, GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-static void __init mx27ads_regulator_init(void)
-{
- struct gpio_chip *vchip;
-
- vchip = kzalloc(sizeof(*vchip), GFP_KERNEL);
- vchip->owner = THIS_MODULE;
- vchip->label = "LCD";
- vchip->base = MX27ADS_LCD_GPIO;
- vchip->ngpio = 1;
- vchip->direction_output = vgpio_dir_out;
- vchip->set = vgpio_set;
- gpiochip_add_data(vchip, NULL);
-
- gpiod_add_lookup_table(&mx27ads_lcd_regulator_gpiod_table);
-
- platform_device_register_data(NULL, "reg-fixed-voltage",
- PLATFORM_DEVID_AUTO,
- &mx27ads_lcd_regulator_pdata,
- sizeof(mx27ads_lcd_regulator_pdata));
-}
-
-static struct imx_fb_videomode mx27ads_modes[] = {
- {
- .mode = {
- .name = "Sharp-LQ035Q7",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 188679, /* in ps (5.3MHz) */
- .hsync_len = 1,
- .left_margin = 9,
- .right_margin = 16,
- .vsync_len = 1,
- .upper_margin = 7,
- .lower_margin = 9,
- },
- .bpp = 16,
- .pcr = 0xFB008BC0,
- },
-};
-
-static const struct imx_fb_platform_data mx27ads_fb_data __initconst = {
- .mode = mx27ads_modes,
- .num_modes = ARRAY_SIZE(mx27ads_modes),
-
- /*
- * - HSYNC active high
- * - VSYNC active high
- * - clk notenabled while idle
- * - clock inverted
- * - data not inverted
- * - data enable low active
- * - enable sharp mode
- */
- .pwmr = 0x00A903FF,
- .lscr1 = 0x00120300,
- .dmacr = 0x00020010,
-};
-
-static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
- void *data)
-{
- return request_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), detect_irq,
- IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
-}
-
-static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
- void *data)
-{
- return request_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), detect_irq,
- IRQF_TRIGGER_RISING, "sdhc2-card-detect", data);
-}
-
-static void mx27ads_sdhc1_exit(struct device *dev, void *data)
-{
- free_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), data);
-}
-
-static void mx27ads_sdhc2_exit(struct device *dev, void *data)
-{
- free_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), data);
-}
-
-static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
- .init = mx27ads_sdhc1_init,
- .exit = mx27ads_sdhc1_exit,
-};
-
-static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
- .init = mx27ads_sdhc2_init,
- .exit = mx27ads_sdhc2_exit,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
- &mx27ads_nor_mtd_device,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static void __init mx27ads_board_init(void)
-{
- imx27_soc_init();
-
- mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
- "mx27ads");
-
- imx27_add_imx_uart0(&uart_pdata);
- imx27_add_imx_uart1(&uart_pdata);
- imx27_add_imx_uart2(&uart_pdata);
- imx27_add_imx_uart3(&uart_pdata);
- imx27_add_imx_uart4(&uart_pdata);
- imx27_add_imx_uart5(&uart_pdata);
- imx27_add_mxc_nand(&mx27ads_nand_board_info);
-
- /* only the i2c master 1 is used on this CPU card */
- i2c_register_board_info(1, mx27ads_i2c_devices,
- ARRAY_SIZE(mx27ads_i2c_devices));
- imx27_add_imx_i2c(1, &mx27ads_i2c1_data);
- imx27_add_imx_fb(&mx27ads_fb_data);
-
- imx27_add_fec(NULL);
- imx27_add_mxc_w1();
-}
-
-static void __init mx27ads_late_init(void)
-{
- mx27ads_regulator_init();
-
- imx27_add_mxc_mmc(0, &sdhc1_pdata);
- imx27_add_mxc_mmc(1, &sdhc2_pdata);
-
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-static void __init mx27ads_timer_init(void)
-{
- unsigned long fref = 26000000;
-
- if ((imx_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0)
- fref = 27000000;
-
- mx27_clocks_init(fref);
-}
-
-static struct map_desc mx27ads_io_desc[] __initdata = {
- {
- .virtual = PBC_BASE_ADDRESS,
- .pfn = __phys_to_pfn(MX27_CS4_BASE_ADDR),
- .length = SZ_1M,
- .type = MT_DEVICE,
- },
-};
-
-static void __init mx27ads_map_io(void)
-{
- mx27_map_io();
- iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
-}
-
-MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
- /* maintainer: Freescale Semiconductor, Inc. */
- .atag_offset = 0x100,
- .map_io = mx27ads_map_io,
- .init_early = imx27_init_early,
- .init_irq = mx27_init_irq,
- .init_time = mx27ads_timer_init,
- .init_machine = mx27ads_board_init,
- .init_late = mx27ads_late_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
deleted file mode 100644
index 23e63d3b4c6a..000000000000
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ /dev/null
@@ -1,615 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/spi/spi.h>
-#include <linux/regulator/machine.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-
-#include "3ds_debugboard.h"
-#include "common.h"
-#include "devices-imx31.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-#include "ulpi.h"
-
-static int mx31_3ds_pins[] = {
- /* UART1 */
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1,
- IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
- /*SPI0*/
- IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_ALT1),
- IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_ALT1),
- /* SPI 1 */
- MX31_PIN_CSPI2_SCLK__SCLK,
- MX31_PIN_CSPI2_MOSI__MOSI,
- MX31_PIN_CSPI2_MISO__MISO,
- MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
- MX31_PIN_CSPI2_SS0__SS0,
- MX31_PIN_CSPI2_SS2__SS2, /*CS for MC13783 */
- /* MC13783 IRQ */
- IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO),
- /* USB OTG reset */
- IOMUX_MODE(MX31_PIN_USB_PWR, IOMUX_CONFIG_GPIO),
- /* USB OTG */
- MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
- MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
- MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
- MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
- MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
- MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
- MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
- MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
- MX31_PIN_USBOTG_CLK__USBOTG_CLK,
- MX31_PIN_USBOTG_DIR__USBOTG_DIR,
- MX31_PIN_USBOTG_NXT__USBOTG_NXT,
- MX31_PIN_USBOTG_STP__USBOTG_STP,
- /*Keyboard*/
- MX31_PIN_KEY_ROW0_KEY_ROW0,
- MX31_PIN_KEY_ROW1_KEY_ROW1,
- MX31_PIN_KEY_ROW2_KEY_ROW2,
- MX31_PIN_KEY_COL0_KEY_COL0,
- MX31_PIN_KEY_COL1_KEY_COL1,
- MX31_PIN_KEY_COL2_KEY_COL2,
- MX31_PIN_KEY_COL3_KEY_COL3,
- /* USB Host 2 */
- IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT1),
- IOMUX_MODE(MX31_PIN_PC_BVD1, IOMUX_CONFIG_ALT1),
- IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT1),
- IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT1),
- IOMUX_MODE(MX31_PIN_IOIS16, IOMUX_CONFIG_ALT1),
- IOMUX_MODE(MX31_PIN_PC_RW_B, IOMUX_CONFIG_ALT1),
- /* USB Host2 reset */
- IOMUX_MODE(MX31_PIN_USB_BYP, IOMUX_CONFIG_GPIO),
- /* I2C1 */
- MX31_PIN_I2C_CLK__I2C1_SCL,
- MX31_PIN_I2C_DAT__I2C1_SDA,
- /* SDHC1 */
- MX31_PIN_SD1_DATA3__SD1_DATA3,
- MX31_PIN_SD1_DATA2__SD1_DATA2,
- MX31_PIN_SD1_DATA1__SD1_DATA1,
- MX31_PIN_SD1_DATA0__SD1_DATA0,
- MX31_PIN_SD1_CLK__SD1_CLK,
- MX31_PIN_SD1_CMD__SD1_CMD,
- MX31_PIN_GPIO3_1__GPIO3_1, /* Card detect */
- MX31_PIN_GPIO3_0__GPIO3_0, /* OE */
- /* Framebuffer */
- MX31_PIN_LD0__LD0,
- MX31_PIN_LD1__LD1,
- MX31_PIN_LD2__LD2,
- MX31_PIN_LD3__LD3,
- MX31_PIN_LD4__LD4,
- MX31_PIN_LD5__LD5,
- MX31_PIN_LD6__LD6,
- MX31_PIN_LD7__LD7,
- MX31_PIN_LD8__LD8,
- MX31_PIN_LD9__LD9,
- MX31_PIN_LD10__LD10,
- MX31_PIN_LD11__LD11,
- MX31_PIN_LD12__LD12,
- MX31_PIN_LD13__LD13,
- MX31_PIN_LD14__LD14,
- MX31_PIN_LD15__LD15,
- MX31_PIN_LD16__LD16,
- MX31_PIN_LD17__LD17,
- MX31_PIN_VSYNC3__VSYNC3,
- MX31_PIN_HSYNC__HSYNC,
- MX31_PIN_FPSHIFT__FPSHIFT,
- MX31_PIN_CONTRAST__CONTRAST,
- /* SSI */
- MX31_PIN_STXD4__STXD4,
- MX31_PIN_SRXD4__SRXD4,
- MX31_PIN_SCK4__SCK4,
- MX31_PIN_SFS4__SFS4,
-};
-
-/*
- * FB support
- */
-static const struct fb_videomode fb_modedb[] = {
- { /* 480x640 @ 60 Hz */
- .name = "Epson-VGA",
- .refresh = 60,
- .xres = 480,
- .yres = 640,
- .pixclock = 41701,
- .left_margin = 20,
- .right_margin = 41,
- .upper_margin = 10,
- .lower_margin = 5,
- .hsync_len = 20,
- .vsync_len = 10,
- .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- },
-};
-
-static struct mx3fb_platform_data mx3fb_pdata __initdata = {
- .name = "Epson-VGA",
- .mode = fb_modedb,
- .num_modes = ARRAY_SIZE(fb_modedb),
-};
-
-/* LCD */
-static struct gpiod_lookup_table mx31_3ds_lcd_gpiod_table = {
- .dev_id = "spi0.2", /* Bus 0 chipselect 2 */
- .table = {
- /*
- * "reset" has IOMUX_TO_GPIO(IOMUX_PIN(88, 28)).
- * The macro only shifts 88 to bits 9..16 and then
- * mask it and shift it back. The GPIO number is 88.
- * 88 is 2*32+24
- */
- GPIO_LOOKUP("imx31-gpio.2", 24, "reset", GPIO_ACTIVE_HIGH),
- /*
- * Same reasoning as above for
- * IOMUX_TO_GPIO(IOMUX_PIN(89, 27), pin 89 is 2*32+25.
- */
- GPIO_LOOKUP("imx31-gpio.2", 25, "enable", GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-/*
- * Support for SD card slot in personality board
- */
-#define MX31_3DS_GPIO_SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
-#define MX31_3DS_GPIO_SDHC1_BE IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
-
-static struct gpio mx31_3ds_sdhc1_gpios[] = {
- { MX31_3DS_GPIO_SDHC1_CD, GPIOF_IN, "sdhc1-card-detect" },
- { MX31_3DS_GPIO_SDHC1_BE, GPIOF_OUT_INIT_LOW, "sdhc1-bus-en" },
-};
-
-static int mx31_3ds_sdhc1_init(struct device *dev,
- irq_handler_t detect_irq,
- void *data)
-{
- int ret;
-
- ret = gpio_request_array(mx31_3ds_sdhc1_gpios,
- ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
- if (ret) {
- pr_warn("Unable to request the SD/MMC GPIOs.\n");
- return ret;
- }
-
- ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)),
- detect_irq,
- IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
- "sdhc1-detect", data);
- if (ret) {
- pr_warn("Unable to request the SD/MMC card-detect IRQ.\n");
- goto gpio_free;
- }
-
- return 0;
-
-gpio_free:
- gpio_free_array(mx31_3ds_sdhc1_gpios,
- ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
- return ret;
-}
-
-static void mx31_3ds_sdhc1_exit(struct device *dev, void *data)
-{
- free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)), data);
- gpio_free_array(mx31_3ds_sdhc1_gpios,
- ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
-}
-
-static void mx31_3ds_sdhc1_setpower(struct device *dev, unsigned int vdd)
-{
- /*
- * While the voltage stuff is done by the driver, activate the
- * Buffer Enable Pin only if there is a card in slot to fix the card
- * voltage issue caused by bi-directional chip TXB0108 on 3Stack.
- * Done here because at this stage we have for sure a debounced value
- * of the presence of the card, showed by the value of vdd.
- * 7 == ilog2(MMC_VDD_165_195)
- */
- if (vdd > 7)
- gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 1);
- else
- gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 0);
-}
-
-static struct imxmmc_platform_data sdhc1_pdata = {
- .init = mx31_3ds_sdhc1_init,
- .exit = mx31_3ds_sdhc1_exit,
- .setpower = mx31_3ds_sdhc1_setpower,
-};
-
-/*
- * Matrix keyboard
- */
-
-static const uint32_t mx31_3ds_keymap[] = {
- KEY(0, 0, KEY_UP),
- KEY(0, 1, KEY_DOWN),
- KEY(1, 0, KEY_RIGHT),
- KEY(1, 1, KEY_LEFT),
- KEY(1, 2, KEY_ENTER),
- KEY(2, 0, KEY_F6),
- KEY(2, 1, KEY_F8),
- KEY(2, 2, KEY_F9),
- KEY(2, 3, KEY_F10),
-};
-
-static const struct matrix_keymap_data mx31_3ds_keymap_data __initconst = {
- .keymap = mx31_3ds_keymap,
- .keymap_size = ARRAY_SIZE(mx31_3ds_keymap),
-};
-
-/* Regulators */
-static struct regulator_init_data pwgtx_init = {
- .constraints = {
- .boot_on = 1,
- .always_on = 1,
- },
-};
-
-static struct regulator_init_data gpo_init = {
- .constraints = {
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_consumer_supply vmmc2_consumers[] = {
- REGULATOR_SUPPLY("vmmc", "imx31-mmc.0"),
-};
-
-static struct regulator_init_data vmmc2_init = {
- .constraints = {
- .min_uV = 3000000,
- .max_uV = 3000000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(vmmc2_consumers),
- .consumer_supplies = vmmc2_consumers,
-};
-
-static struct regulator_consumer_supply vmmc1_consumers[] = {
- REGULATOR_SUPPLY("vcore", "spi0.0"),
-};
-
-static struct regulator_init_data vmmc1_init = {
- .constraints = {
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers),
- .consumer_supplies = vmmc1_consumers,
-};
-
-static struct regulator_consumer_supply vgen_consumers[] = {
- REGULATOR_SUPPLY("vdd", "spi0.0"),
-};
-
-static struct regulator_init_data vgen_init = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(vgen_consumers),
- .consumer_supplies = vgen_consumers,
-};
-
-static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = {
- {
- .id = MC13783_REG_PWGT1SPI, /* Power Gate for ARM core. */
- .init_data = &pwgtx_init,
- }, {
- .id = MC13783_REG_PWGT2SPI, /* Power Gate for L2 Cache. */
- .init_data = &pwgtx_init,
- }, {
-
- .id = MC13783_REG_GPO1, /* Turn on 1.8V */
- .init_data = &gpo_init,
- }, {
- .id = MC13783_REG_GPO3, /* Turn on 3.3V */
- .init_data = &gpo_init,
- }, {
- .id = MC13783_REG_VMMC2, /* Power MMC/SD, WiFi/Bluetooth. */
- .init_data = &vmmc2_init,
- }, {
- .id = MC13783_REG_VMMC1, /* Power LCD, CMOS, FM, GPS, Accel. */
- .init_data = &vmmc1_init,
- }, {
- .id = MC13783_REG_VGEN, /* Power LCD */
- .init_data = &vgen_init,
- },
-};
-
-/* MC13783 */
-static struct mc13xxx_codec_platform_data mx31_3ds_codec = {
- .dac_ssi_port = MC13783_SSI1_PORT,
- .adc_ssi_port = MC13783_SSI1_PORT,
-};
-
-static struct mc13xxx_platform_data mc13783_pdata = {
- .regulators = {
- .regulators = mx31_3ds_regulators,
- .num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
- },
- .codec = &mx31_3ds_codec,
- .flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC | MC13XXX_USE_CODEC,
-
-};
-
-static struct imx_ssi_platform_data mx31_3ds_ssi_pdata = {
- .flags = IMX_SSI_DMA | IMX_SSI_NET,
-};
-
-static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
- {
- .modalias = "mc13783",
- .max_speed_hz = 1000000,
- .bus_num = 1,
- .chip_select = 2, /* SS2 */
- .platform_data = &mc13783_pdata,
- /* irq number is run-time assigned */
- .mode = SPI_CS_HIGH,
- }, {
- .modalias = "l4f00242t03",
- .max_speed_hz = 5000000,
- .bus_num = 0,
- .chip_select = 2, /* SS2 */
- },
-};
-
-/*
- * NAND Flash
- */
-static const struct mxc_nand_platform_data
-mx31_3ds_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
-#ifdef CONFIG_MACH_MX31_3DS_MXC_NAND_USE_BBT
- .flash_bbt = 1,
-#endif
-};
-
-/*
- * USB OTG
- */
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
- PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-#define USBOTG_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_PWR)
-#define USBH2_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_BYP)
-
-static int mx31_3ds_usbotg_init(void)
-{
- int err;
-
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
-
- err = gpio_request(USBOTG_RST_B, "otgusb-reset");
- if (err) {
- pr_err("Failed to request the USB OTG reset gpio\n");
- return err;
- }
-
- err = gpio_direction_output(USBOTG_RST_B, 0);
- if (err) {
- pr_err("Failed to drive the USB OTG reset gpio\n");
- goto usbotg_free_reset;
- }
-
- mdelay(1);
- gpio_set_value(USBOTG_RST_B, 1);
- return 0;
-
-usbotg_free_reset:
- gpio_free(USBOTG_RST_B);
- return err;
-}
-
-static int mx31_3ds_otg_init(struct platform_device *pdev)
-{
- return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
-}
-
-static int mx31_3ds_host2_init(struct platform_device *pdev)
-{
- int err;
-
- mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_PC_VS2, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_PC_BVD1, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_PC_BVD2, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_PC_RST, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_IOIS16, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_PC_RW_B, USB_PAD_CFG);
-
- err = gpio_request(USBH2_RST_B, "usbh2-reset");
- if (err) {
- pr_err("Failed to request the USB Host 2 reset gpio\n");
- return err;
- }
-
- err = gpio_direction_output(USBH2_RST_B, 0);
- if (err) {
- pr_err("Failed to drive the USB Host 2 reset gpio\n");
- goto usbotg_free_reset;
- }
-
- mdelay(1);
- gpio_set_value(USBH2_RST_B, 1);
-
- mdelay(10);
-
- return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
-
-usbotg_free_reset:
- gpio_free(USBH2_RST_B);
- return err;
-}
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
- .init = mx31_3ds_otg_init,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
- .init = mx31_3ds_host2_init,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static const struct fsl_usb2_platform_data usbotg_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_ULPI,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init mx31_3ds_otg_mode(char *options)
-{
- if (!strcmp(options, "host"))
- otg_mode_host = true;
- else if (!strcmp(options, "device"))
- otg_mode_host = false;
- else
- pr_info("otg_mode neither \"host\" nor \"device\". "
- "Defaulting to device\n");
- return 1;
-}
-__setup("otg_mode=", mx31_3ds_otg_mode);
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data mx31_3ds_i2c0_data __initconst = {
- .bitrate = 100000,
-};
-
-static void __init mx31_3ds_init(void)
-{
- imx31_soc_init();
-
- /* Configure SPI1 IOMUX */
- mxc_iomux_set_gpr(MUX_PGP_CSPI_BB, true);
-
- mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
- "mx31_3ds");
-
- imx31_add_imx_uart0(&uart_pdata);
- imx31_add_mxc_nand(&mx31_3ds_nand_board_info);
-
- imx31_add_spi_imx1(NULL);
-
- imx31_add_imx_keypad(&mx31_3ds_keymap_data);
-
- imx31_add_imx2_wdt();
- imx31_add_imx_i2c0(&mx31_3ds_i2c0_data);
-
- imx31_add_spi_imx0(NULL);
- imx31_add_ipu_core();
- imx31_add_mx3_sdc_fb(&mx3fb_pdata);
-
- imx31_add_imx_ssi(0, &mx31_3ds_ssi_pdata);
-
- imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
-}
-
-static void __init mx31_3ds_late(void)
-{
- gpiod_add_lookup_table(&mx31_3ds_lcd_gpiod_table);
- mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
- spi_register_board_info(mx31_3ds_spi_devs,
- ARRAY_SIZE(mx31_3ds_spi_devs));
-
- mx31_3ds_usbotg_init();
- if (otg_mode_host) {
- otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT);
- if (otg_pdata.otg)
- imx31_add_mxc_ehci_otg(&otg_pdata);
- }
- usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT);
- if (usbh2_pdata.otg)
- imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-
- if (!otg_mode_host)
- imx31_add_fsl_usb2_udc(&usbotg_pdata);
-
- if (mxc_expio_init(MX31_CS5_BASE_ADDR, IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)))
- printk(KERN_WARNING "Init of the debug board failed, all "
- "devices on the debug board are unusable.\n");
-
- imx31_add_mxc_mmc(0, &sdhc1_pdata);
-}
-
-static void __init mx31_3ds_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
- /* Maintainer: Freescale Semiconductor, Inc. */
- .atag_offset = 0x100,
- .map_io = mx31_map_io,
- .init_early = imx31_init_early,
- .init_irq = mx31_init_irq,
- .init_time = mx31_3ds_timer_init,
- .init_machine = mx31_3ds_init,
- .init_late = mx31_3ds_late,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
deleted file mode 100644
index 49783385bccf..000000000000
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ /dev/null
@@ -1,579 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/serial_8250.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-
-#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
-#include <linux/mfd/wm8350/audio.h>
-#include <linux/mfd/wm8350/core.h>
-#include <linux/mfd/wm8350/pmic.h>
-#endif
-
-#include "common.h"
-#include "devices-imx31.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-
-/* Base address of PBC controller */
-#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT
-
-/* PBC Board interrupt status register */
-#define PBC_INTSTATUS 0x000016
-
-/* PBC Board interrupt current status register */
-#define PBC_INTCURR_STATUS 0x000018
-
-/* PBC Interrupt mask register set address */
-#define PBC_INTMASK_SET 0x00001A
-
-/* PBC Interrupt mask register clear address */
-#define PBC_INTMASK_CLEAR 0x00001C
-
-/* External UART A */
-#define PBC_SC16C652_UARTA 0x010000
-
-/* External UART B */
-#define PBC_SC16C652_UARTB 0x010010
-
-#define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS)
-#define PBC_INTMASK_SET_REG (PBC_INTMASK_SET + PBC_BASE_ADDRESS)
-#define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
-
-#define EXPIO_INT_XUART_INTA 10
-#define EXPIO_INT_XUART_INTB 11
-
-#define MXC_MAX_EXP_IO_LINES 16
-
-/* CS8900 */
-#define EXPIO_INT_ENET_INT 8
-#define CS4_CS8900_MMIO_START 0x20000
-
-static struct irq_domain *domain;
-
-/*
- * The serial port definition structure.
- */
-static struct plat_serial8250_port serial_platform_data[] = {
- {
- .membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA),
- .mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA),
- .uartclk = 14745600,
- .regshift = 0,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
- }, {
- .membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB),
- .mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB),
- .uartclk = 14745600,
- .regshift = 0,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
- },
- {},
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = 0,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
-
-static struct resource mx31ads_cs8900_resources[] __initdata = {
- DEFINE_RES_MEM(MX31_CS4_BASE_ADDR + CS4_CS8900_MMIO_START, SZ_64K),
- DEFINE_RES_IRQ(-1),
-};
-
-static const struct platform_device_info mx31ads_cs8900_devinfo __initconst = {
- .name = "cs89x0",
- .id = 0,
- .res = mx31ads_cs8900_resources,
- .num_res = ARRAY_SIZE(mx31ads_cs8900_resources),
-};
-
-static int __init mxc_init_extuart(void)
-{
- serial_platform_data[0].irq = irq_find_mapping(domain,
- EXPIO_INT_XUART_INTA);
- serial_platform_data[1].irq = irq_find_mapping(domain,
- EXPIO_INT_XUART_INTB);
- return platform_device_register(&serial_device);
-}
-
-static void __init mxc_init_ext_ethernet(void)
-{
- mx31ads_cs8900_resources[1].start =
- irq_find_mapping(domain, EXPIO_INT_ENET_INT);
- mx31ads_cs8900_resources[1].end =
- irq_find_mapping(domain, EXPIO_INT_ENET_INT);
- platform_device_register_full(
- (struct platform_device_info *)&mx31ads_cs8900_devinfo);
-}
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static unsigned int uart_pins[] = {
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1
-};
-
-static inline void mxc_init_imx_uart(void)
-{
- mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
- imx31_add_imx_uart0(&uart_pdata);
-}
-
-static void mx31ads_expio_irq_handler(struct irq_desc *desc)
-{
- u32 imr_val;
- u32 int_valid;
- u32 expio_irq;
-
- imr_val = imx_readw(PBC_INTMASK_SET_REG);
- int_valid = imx_readw(PBC_INTSTATUS_REG) & imr_val;
-
- expio_irq = 0;
- for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
- if ((int_valid & 1) == 0)
- continue;
-
- generic_handle_irq(irq_find_mapping(domain, expio_irq));
- }
-}
-
-/*
- * Disable an expio pin's interrupt by setting the bit in the imr.
- * @param d an expio virtual irq description
- */
-static void expio_mask_irq(struct irq_data *d)
-{
- u32 expio = d->hwirq;
- /* mask the interrupt */
- imx_writew(1 << expio, PBC_INTMASK_CLEAR_REG);
- imx_readw(PBC_INTMASK_CLEAR_REG);
-}
-
-/*
- * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
- * @param d an expio virtual irq description
- */
-static void expio_ack_irq(struct irq_data *d)
-{
- u32 expio = d->hwirq;
- /* clear the interrupt status */
- imx_writew(1 << expio, PBC_INTSTATUS_REG);
-}
-
-/*
- * Enable a expio pin's interrupt by clearing the bit in the imr.
- * @param d an expio virtual irq description
- */
-static void expio_unmask_irq(struct irq_data *d)
-{
- u32 expio = d->hwirq;
- /* unmask the interrupt */
- imx_writew(1 << expio, PBC_INTMASK_SET_REG);
-}
-
-static struct irq_chip expio_irq_chip = {
- .name = "EXPIO(CPLD)",
- .irq_ack = expio_ack_irq,
- .irq_mask = expio_mask_irq,
- .irq_unmask = expio_unmask_irq,
-};
-
-static void __init mx31ads_init_expio(void)
-{
- int irq_base;
- int i, irq;
-
- printk(KERN_INFO "MX31ADS EXPIO(CPLD) hardware\n");
-
- /*
- * Configure INT line as GPIO input
- */
- mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
-
- /* disable the interrupt and clear the status */
- imx_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
- imx_writew(0xFFFF, PBC_INTSTATUS_REG);
-
- irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id());
- WARN_ON(irq_base < 0);
-
- domain = irq_domain_add_legacy(NULL, MXC_MAX_EXP_IO_LINES, irq_base, 0,
- &irq_domain_simple_ops, NULL);
- WARN_ON(!domain);
-
- for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) {
- irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq);
- irq_clear_status_flags(i, IRQ_NOREQUEST);
- }
- irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_4));
- irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
- irq_set_chained_handler(irq, mx31ads_expio_irq_handler);
-}
-
-#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
-/* This section defines setup for the Wolfson Microelectronics
- * 1133-EV1 PMU/audio board. When other PMU boards are supported the
- * regulator definitions may be shared with them, but for now they can
- * only be used with this board so would generate warnings about
- * unused statics and some of the configuration is specific to this
- * module.
- */
-
-/* CPU */
-static struct regulator_consumer_supply sw1a_consumers[] = {
- {
- .supply = "cpu_vcc",
- }
-};
-
-static struct regulator_init_data sw1a_data = {
- .constraints = {
- .name = "SW1A",
- .min_uV = 1275000,
- .max_uV = 1600000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_FAST,
- .state_mem = {
- .uV = 1400000,
- .mode = REGULATOR_MODE_NORMAL,
- .enabled = 1,
- },
- .initial_state = PM_SUSPEND_MEM,
- .always_on = 1,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(sw1a_consumers),
- .consumer_supplies = sw1a_consumers,
-};
-
-/* System IO - High */
-static struct regulator_init_data viohi_data = {
- .constraints = {
- .name = "VIOHO",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .state_mem = {
- .uV = 2800000,
- .mode = REGULATOR_MODE_NORMAL,
- .enabled = 1,
- },
- .initial_state = PM_SUSPEND_MEM,
- .always_on = 1,
- .boot_on = 1,
- },
-};
-
-/* System IO - Low */
-static struct regulator_init_data violo_data = {
- .constraints = {
- .name = "VIOLO",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .state_mem = {
- .uV = 1800000,
- .mode = REGULATOR_MODE_NORMAL,
- .enabled = 1,
- },
- .initial_state = PM_SUSPEND_MEM,
- .always_on = 1,
- .boot_on = 1,
- },
-};
-
-/* DDR RAM */
-static struct regulator_init_data sw2a_data = {
- .constraints = {
- .name = "SW2A",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .state_mem = {
- .uV = 1800000,
- .mode = REGULATOR_MODE_NORMAL,
- .enabled = 1,
- },
- .state_disk = {
- .mode = REGULATOR_MODE_NORMAL,
- .enabled = 0,
- },
- .always_on = 1,
- .boot_on = 1,
- .initial_state = PM_SUSPEND_MEM,
- },
-};
-
-static struct regulator_init_data ldo1_data = {
- .constraints = {
- .name = "VCAM/VMMC1/VMMC2",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- },
-};
-
-static struct regulator_consumer_supply ldo2_consumers[] = {
- { .supply = "AVDD", .dev_name = "1-001a" },
- { .supply = "HPVDD", .dev_name = "1-001a" },
-};
-
-/* CODEC and SIM */
-static struct regulator_init_data ldo2_data = {
- .constraints = {
- .name = "VESIM/VSIM/AVDD",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo2_consumers),
- .consumer_supplies = ldo2_consumers,
-};
-
-/* General */
-static struct regulator_init_data vdig_data = {
- .constraints = {
- .name = "VDIG",
- .min_uV = 1500000,
- .max_uV = 1500000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .apply_uV = 1,
- .always_on = 1,
- .boot_on = 1,
- },
-};
-
-/* Tranceivers */
-static struct regulator_init_data ldo4_data = {
- .constraints = {
- .name = "VRF1/CVDD_2.775",
- .min_uV = 2500000,
- .max_uV = 2500000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .apply_uV = 1,
- .always_on = 1,
- .boot_on = 1,
- },
-};
-
-static struct wm8350_led_platform_data wm8350_led_data = {
- .name = "wm8350:white",
- .default_trigger = "heartbeat",
- .max_uA = 27899,
-};
-
-static struct wm8350_audio_platform_data imx32ads_wm8350_setup = {
- .vmid_discharge_msecs = 1000,
- .drain_msecs = 30,
- .cap_discharge_msecs = 700,
- .vmid_charge_msecs = 700,
- .vmid_s_curve = WM8350_S_CURVE_SLOW,
- .dis_out4 = WM8350_DISCHARGE_SLOW,
- .dis_out3 = WM8350_DISCHARGE_SLOW,
- .dis_out2 = WM8350_DISCHARGE_SLOW,
- .dis_out1 = WM8350_DISCHARGE_SLOW,
- .vroi_out4 = WM8350_TIE_OFF_500R,
- .vroi_out3 = WM8350_TIE_OFF_500R,
- .vroi_out2 = WM8350_TIE_OFF_500R,
- .vroi_out1 = WM8350_TIE_OFF_500R,
- .vroi_enable = 0,
- .codec_current_on = WM8350_CODEC_ISEL_1_0,
- .codec_current_standby = WM8350_CODEC_ISEL_0_5,
- .codec_current_charge = WM8350_CODEC_ISEL_1_5,
-};
-
-static int mx31_wm8350_init(struct wm8350 *wm8350)
-{
- wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN,
- WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW,
- WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF,
- WM8350_GPIO_DEBOUNCE_ON);
-
- wm8350_gpio_config(wm8350, 3, WM8350_GPIO_DIR_IN,
- WM8350_GPIO3_PWR_OFF_IN, WM8350_GPIO_ACTIVE_HIGH,
- WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
- WM8350_GPIO_DEBOUNCE_ON);
-
- wm8350_gpio_config(wm8350, 4, WM8350_GPIO_DIR_IN,
- WM8350_GPIO4_MR_IN, WM8350_GPIO_ACTIVE_HIGH,
- WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
- WM8350_GPIO_DEBOUNCE_OFF);
-
- wm8350_gpio_config(wm8350, 7, WM8350_GPIO_DIR_IN,
- WM8350_GPIO7_HIBERNATE_IN, WM8350_GPIO_ACTIVE_HIGH,
- WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
- WM8350_GPIO_DEBOUNCE_OFF);
-
- wm8350_gpio_config(wm8350, 6, WM8350_GPIO_DIR_OUT,
- WM8350_GPIO6_SDOUT_OUT, WM8350_GPIO_ACTIVE_HIGH,
- WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
- WM8350_GPIO_DEBOUNCE_OFF);
-
- wm8350_gpio_config(wm8350, 8, WM8350_GPIO_DIR_OUT,
- WM8350_GPIO8_VCC_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
- WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
- WM8350_GPIO_DEBOUNCE_OFF);
-
- wm8350_gpio_config(wm8350, 9, WM8350_GPIO_DIR_OUT,
- WM8350_GPIO9_BATT_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
- WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
- WM8350_GPIO_DEBOUNCE_OFF);
-
- wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data);
- wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data);
- wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data);
- wm8350_register_regulator(wm8350, WM8350_DCDC_6, &sw2a_data);
- wm8350_register_regulator(wm8350, WM8350_LDO_1, &ldo1_data);
- wm8350_register_regulator(wm8350, WM8350_LDO_2, &ldo2_data);
- wm8350_register_regulator(wm8350, WM8350_LDO_3, &vdig_data);
- wm8350_register_regulator(wm8350, WM8350_LDO_4, &ldo4_data);
-
- /* LEDs */
- wm8350_dcdc_set_slot(wm8350, WM8350_DCDC_5, 1, 1,
- WM8350_DC5_ERRACT_SHUTDOWN_CONV);
- wm8350_isink_set_flash(wm8350, WM8350_ISINK_A,
- WM8350_ISINK_FLASH_DISABLE,
- WM8350_ISINK_FLASH_TRIG_BIT,
- WM8350_ISINK_FLASH_DUR_32MS,
- WM8350_ISINK_FLASH_ON_INSTANT,
- WM8350_ISINK_FLASH_OFF_INSTANT,
- WM8350_ISINK_FLASH_MODE_EN);
- wm8350_dcdc25_set_mode(wm8350, WM8350_DCDC_5,
- WM8350_ISINK_MODE_BOOST,
- WM8350_ISINK_ILIM_NORMAL,
- WM8350_DC5_RMP_20V,
- WM8350_DC5_FBSRC_ISINKA);
- wm8350_register_led(wm8350, 0, WM8350_DCDC_5, WM8350_ISINK_A,
- &wm8350_led_data);
-
- wm8350->codec.platform_data = &imx32ads_wm8350_setup;
-
- regulator_has_full_constraints();
-
- return 0;
-}
-
-static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
- .init = mx31_wm8350_init,
-};
-#endif
-
-static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = {
-#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
- {
- I2C_BOARD_INFO("wm8350", 0x1a),
- .platform_data = &mx31_wm8350_pdata,
- /* irq number is run-time assigned */
- },
-#endif
-};
-
-static void __init mxc_init_i2c(void)
-{
-#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
- mx31ads_i2c1_devices[0].irq =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
-#endif
- i2c_register_board_info(1, mx31ads_i2c1_devices,
- ARRAY_SIZE(mx31ads_i2c1_devices));
-
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1));
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1));
-
- imx31_add_imx_i2c1(NULL);
-}
-
-static unsigned int ssi_pins[] = {
- MX31_PIN_SFS5__SFS5,
- MX31_PIN_SCK5__SCK5,
- MX31_PIN_SRXD5__SRXD5,
- MX31_PIN_STXD5__STXD5,
-};
-
-static void __init mxc_init_audio(void)
-{
- imx31_add_imx_ssi(0, NULL);
- mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
-}
-
-/*
- * Static mappings, starting from the CS4 start address up to the start address
- * of the CS8900.
- */
-static struct map_desc mx31ads_io_desc[] __initdata = {
- {
- .virtual = (unsigned long)MX31_CS4_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
- .length = CS4_CS8900_MMIO_START,
- .type = MT_DEVICE
- },
-};
-
-static void __init mx31ads_map_io(void)
-{
- mx31_map_io();
- iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
-}
-
-static void __init mx31ads_init(void)
-{
- imx31_soc_init();
-
- mxc_init_imx_uart();
- mxc_init_audio();
-}
-
-static void __init mx31ads_late(void)
-{
- mx31ads_init_expio();
- mxc_init_extuart();
- mxc_init_i2c();
- mxc_init_ext_ethernet();
-}
-
-static void __init mx31ads_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-MACHINE_START(MX31ADS, "Freescale MX31ADS")
- /* Maintainer: Freescale Semiconductor, Inc. */
- .atag_offset = 0x100,
- .map_io = mx31ads_map_io,
- .init_early = imx31_init_early,
- .init_irq = mx31_init_irq,
- .init_time = mx31ads_timer_init,
- .init_machine = mx31ads_init,
- .init_late = mx31ads_late,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
deleted file mode 100644
index 4b955ccc92cd..000000000000
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ /dev/null
@@ -1,312 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * LILLY-1131 module support
- *
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- *
- * based on code for other MX31 boards,
- *
- * Copyright 2005-2007 Freescale Semiconductor
- * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/moduleparam.h>
-#include <linux/smsc911x.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include "board-mx31lilly.h"
-#include "common.h"
-#include "devices-imx31.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-#include "ulpi.h"
-
-/*
- * This file contains module-specific initialization routines for LILLY-1131.
- * Initialization of peripherals found on the baseboard is implemented in the
- * appropriate baseboard support code.
- */
-
-static unsigned int mx31lilly_pins[] __initdata = {
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1,
- MX31_PIN_CTS2__CTS2,
- MX31_PIN_RTS2__RTS2,
- MX31_PIN_TXD2__TXD2,
- MX31_PIN_RXD2__RXD2,
- MX31_PIN_CSPI3_MOSI__RXD3,
- MX31_PIN_CSPI3_MISO__TXD3,
- MX31_PIN_CSPI3_SCLK__RTS3,
- MX31_PIN_CSPI3_SPI_RDY__CTS3,
-};
-
-/* UART */
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-/* SMSC ethernet support */
-
-static struct resource smsc91x_resources[] = {
- {
- .start = MX31_CS4_BASE_ADDR,
- .end = MX31_CS4_BASE_ADDR + 0xffff,
- .flags = IORESOURCE_MEM,
- },
- {
- /* irq number is run-time assigned */
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
- }
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_32BIT |
- SMSC911X_SAVE_MAC_ADDRESS |
- SMSC911X_FORCE_INTERNAL_PHY,
-};
-
-static struct platform_device smsc91x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc91x_resources),
- .resource = smsc91x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- }
-};
-
-/* NOR flash */
-static struct physmap_flash_data nor_flash_data = {
- .width = 2,
-};
-
-static struct resource nor_flash_resource = {
- .start = 0xa0000000,
- .end = 0xa1ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device physmap_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &nor_flash_data,
- },
- .resource = &nor_flash_resource,
- .num_resources = 1,
-};
-
-/* USB */
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
- PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-static int usbh1_init(struct platform_device *pdev)
-{
- int pins[] = {
- MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
- MX31_PIN_CSPI1_MISO__USBH1_RXDP,
- MX31_PIN_CSPI1_SS0__USBH1_TXDM,
- MX31_PIN_CSPI1_SS1__USBH1_TXDP,
- MX31_PIN_CSPI1_SS2__USBH1_RCV,
- MX31_PIN_CSPI1_SCLK__USBH1_OEB,
- MX31_PIN_CSPI1_SPI_RDY__USBH1_FS,
- };
-
- mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H1");
-
- mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
-
- mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
-
- mdelay(10);
-
- return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
- MXC_EHCI_INTERFACE_SINGLE_UNI);
-}
-
-static int usbh2_init(struct platform_device *pdev)
-{
- int pins[] = {
- MX31_PIN_USBH2_DATA0__USBH2_DATA0,
- MX31_PIN_USBH2_DATA1__USBH2_DATA1,
- MX31_PIN_USBH2_CLK__USBH2_CLK,
- MX31_PIN_USBH2_DIR__USBH2_DIR,
- MX31_PIN_USBH2_NXT__USBH2_NXT,
- MX31_PIN_USBH2_STP__USBH2_STP,
- };
-
- mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2");
-
- mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
-
- mxc_iomux_set_gpr(MUX_PGP_UH2, true);
-
- /* chip select */
- mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO),
- "USBH2_CS");
- gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
- gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
-
- mdelay(10);
-
- return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
-}
-
-static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
- .init = usbh1_init,
- .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
-};
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
- .init = usbh2_init,
- .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-};
-
-static void __init lilly1131_usb_init(void)
-{
- imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
-
- usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT);
- if (usbh2_pdata.otg)
- imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-}
-
-static struct mc13xxx_platform_data mc13783_pdata __initdata = {
- .flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN,
-};
-
-static struct spi_board_info mc13783_dev __initdata = {
- .modalias = "mc13783",
- .max_speed_hz = 1000000,
- .bus_num = 1,
- .chip_select = 0,
- .platform_data = &mc13783_pdata,
- /* irq number is run-time assigned */
-};
-
-static struct platform_device *devices[] __initdata = {
- &smsc91x_device,
- &physmap_flash_device,
-};
-
-static int mx31lilly_baseboard;
-core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444);
-
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
-};
-
-static void __init mx31lilly_board_init(void)
-{
- imx31_soc_init();
-
- mxc_iomux_setup_multiple_pins(mx31lilly_pins,
- ARRAY_SIZE(mx31lilly_pins), "mx31lily");
-
- imx31_add_imx_uart0(&uart_pdata);
- imx31_add_imx_uart1(&uart_pdata);
- imx31_add_imx_uart2(&uart_pdata);
-
- mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
-
- /* SPI */
- mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SCLK__SCLK, "SPI1_CLK");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MOSI__MOSI, "SPI1_TX");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MISO__MISO, "SPI1_RX");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, "SPI1_RDY");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS0__SS0, "SPI1_SS0");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS1__SS1, "SPI1_SS1");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS2__SS2, "SPI1_SS2");
-
- mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SCLK__SCLK, "SPI2_CLK");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__MOSI, "SPI2_TX");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__MISO, "SPI2_RX");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, "SPI2_RDY");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS0__SS0, "SPI2_SS0");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2");
-
- imx31_add_spi_imx0(NULL);
- imx31_add_spi_imx1(NULL);
-
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-}
-
-static void __init mx31lilly_late_init(void)
-{
- if (mx31lilly_baseboard == MX31LILLY_DB)
- mx31lilly_db_init();
-
- mc13783_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
- spi_register_board_info(&mc13783_dev, 1);
-
- smsc91x_resources[1].start =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
- smsc91x_resources[1].end =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- /* USB */
- lilly1131_usb_init();
-}
-
-static void __init mx31lilly_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
- .atag_offset = 0x100,
- .map_io = mx31_map_io,
- .init_early = imx31_init_early,
- .init_irq = mx31_init_irq,
- .init_time = mx31lilly_timer_init,
- .init_machine = mx31lilly_board_init,
- .init_late = mx31lilly_late_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
deleted file mode 100644
index aaccf52f7ac1..000000000000
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ /dev/null
@@ -1,290 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/memory.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/moduleparam.h>
-#include <linux/smsc911x.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/spi/spi.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <linux/mtd/physmap.h>
-#include <linux/delay.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-
-#include "board-mx31lite.h"
-#include "common.h"
-#include "devices-imx31.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-#include "ulpi.h"
-
-/*
- * This file contains the module-specific initialization routines.
- */
-
-static unsigned int mx31lite_pins[] = {
- /* UART1 */
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1,
- /* SPI 0 */
- MX31_PIN_CSPI1_SCLK__SCLK,
- MX31_PIN_CSPI1_MOSI__MOSI,
- MX31_PIN_CSPI1_MISO__MISO,
- MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
- MX31_PIN_CSPI1_SS0__SS0,
- MX31_PIN_CSPI1_SS1__SS1,
- MX31_PIN_CSPI1_SS2__SS2,
- /* LAN9117 IRQ pin */
- IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
- /* SPI 1 */
- MX31_PIN_CSPI2_SCLK__SCLK,
- MX31_PIN_CSPI2_MOSI__MOSI,
- MX31_PIN_CSPI2_MISO__MISO,
- MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
- MX31_PIN_CSPI2_SS0__SS0,
- MX31_PIN_CSPI2_SS1__SS1,
- MX31_PIN_CSPI2_SS2__SS2,
-};
-
-/* UART */
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct mxc_nand_platform_data
-mx31lite_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_16BIT,
-};
-
-static struct resource smsc911x_resources[] = {
- {
- .start = MX31_CS4_BASE_ADDR,
- .end = MX31_CS4_BASE_ADDR + 0x100,
- .flags = IORESOURCE_MEM,
- }, {
- /* irq number is run-time assigned */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smsc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-static struct mc13xxx_platform_data mc13783_pdata __initdata = {
- .flags = MC13XXX_USE_RTC,
-};
-
-static struct spi_board_info mc13783_spi_dev __initdata = {
- .modalias = "mc13783",
- .max_speed_hz = 1000000,
- .bus_num = 1,
- .chip_select = 0,
- .platform_data = &mc13783_pdata,
- /* irq number is run-time assigned */
-};
-
-/*
- * USB
- */
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
- PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-static int usbh2_init(struct platform_device *pdev)
-{
- int pins[] = {
- MX31_PIN_USBH2_DATA0__USBH2_DATA0,
- MX31_PIN_USBH2_DATA1__USBH2_DATA1,
- MX31_PIN_USBH2_CLK__USBH2_CLK,
- MX31_PIN_USBH2_DIR__USBH2_DIR,
- MX31_PIN_USBH2_NXT__USBH2_NXT,
- MX31_PIN_USBH2_STP__USBH2_STP,
- };
-
- mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2");
-
- mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
-
- mxc_iomux_set_gpr(MUX_PGP_UH2, true);
-
- /* chip select */
- mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO),
- "USBH2_CS");
- gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
- gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
-
- mdelay(10);
-
- return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
-}
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
- .init = usbh2_init,
- .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-};
-
-/*
- * NOR flash
- */
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 2,
-};
-
-static struct resource nor_flash_resource = {
- .start = 0xa0000000,
- .end = 0xa1ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device physmap_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &nor_flash_data,
- },
- .resource = &nor_flash_resource,
- .num_resources = 1,
-};
-
-/*
- * This structure defines the MX31 memory map.
- */
-static struct map_desc mx31lite_io_desc[] __initdata = {
- {
- .virtual = (unsigned long)MX31_CS4_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
- .length = MX31_CS4_SIZE,
- .type = MT_DEVICE
- }
-};
-
-/*
- * Set up static virtual mappings.
- */
-static void __init mx31lite_map_io(void)
-{
- mx31_map_io();
- iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
-}
-
-static int mx31lite_baseboard;
-core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444);
-
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
-};
-
-static void __init mx31lite_init(void)
-{
- imx31_soc_init();
-
- mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
- "mx31lite");
-
- imx31_add_imx_uart0(&uart_pdata);
- imx31_add_spi_imx0(NULL);
-
- /* NOR and NAND flash */
- platform_device_register(&physmap_flash_device);
- imx31_add_mxc_nand(&mx31lite_nand_board_info);
-
- imx31_add_spi_imx1(NULL);
-
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-}
-
-static void __init mx31lite_late(void)
-{
- int ret;
-
- if (mx31lite_baseboard == MX31LITE_DB)
- mx31lite_db_init();
-
- mc13783_spi_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
- spi_register_board_info(&mc13783_spi_dev, 1);
-
- /* USB */
- usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT);
- if (usbh2_pdata.otg)
- imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-
- /* SMSC9117 IRQ pin */
- ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
- if (ret)
- pr_warn("could not get LAN irq gpio\n");
- else {
- gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6));
- smsc911x_resources[1].start =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SFS6));
- smsc911x_resources[1].end =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SFS6));
- platform_device_register(&smsc911x_device);
- }
-}
-
-static void __init mx31lite_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
- /* Maintainer: Freescale Semiconductor, Inc. */
- .atag_offset = 0x100,
- .map_io = mx31lite_map_io,
- .init_early = imx31_init_early,
- .init_irq = mx31_init_irq,
- .init_time = mx31lite_timer_init,
- .init_machine = mx31lite_init,
- .init_late = mx31lite_late,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
deleted file mode 100644
index 7f780ad2d459..000000000000
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ /dev/null
@@ -1,581 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2008 Valentin Longchamp, EPFL Mobots group
- */
-
-#include <linux/delay.h>
-#include <linux/dma-map-ops.h>
-#include <linux/gfp.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/moduleparam.h>
-#include <linux/leds.h>
-#include <linux/memory.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/spi/spi.h>
-#include <linux/types.h>
-#include <linux/memblock.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/input.h>
-
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <asm/memblock.h>
-#include <linux/platform_data/asoc-imx-ssi.h>
-
-#include "board-mx31moboard.h"
-#include "common.h"
-#include "devices-imx31.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-#include "ulpi.h"
-
-static unsigned int moboard_pins[] = {
- /* UART0 */
- MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
- MX31_PIN_CTS1__GPIO2_7,
- /* UART4 */
- MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
- MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
- /* I2C0 */
- MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_CLK__I2C1_SCL,
- /* I2C1 */
- MX31_PIN_DCD_DTE1__I2C2_SDA, MX31_PIN_RI_DTE1__I2C2_SCL,
- /* SDHC1 */
- MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2,
- MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0,
- MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD,
- MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
- /* USB reset */
- MX31_PIN_GPIO1_0__GPIO1_0,
- /* USB OTG */
- MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
- MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
- MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
- MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
- MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
- MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
- MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
- MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
- MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
- MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
- MX31_PIN_USB_OC__GPIO1_30,
- /* USB H2 */
- MX31_PIN_USBH2_DATA0__USBH2_DATA0,
- MX31_PIN_USBH2_DATA1__USBH2_DATA1,
- MX31_PIN_STXD3__USBH2_DATA2, MX31_PIN_SRXD3__USBH2_DATA3,
- MX31_PIN_SCK3__USBH2_DATA4, MX31_PIN_SFS3__USBH2_DATA5,
- MX31_PIN_STXD6__USBH2_DATA6, MX31_PIN_SRXD6__USBH2_DATA7,
- MX31_PIN_USBH2_CLK__USBH2_CLK, MX31_PIN_USBH2_DIR__USBH2_DIR,
- MX31_PIN_USBH2_NXT__USBH2_NXT, MX31_PIN_USBH2_STP__USBH2_STP,
- MX31_PIN_SCK6__GPIO1_25,
- /* LEDs */
- MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
- MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
- /* SPI1 */
- MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO,
- MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
- MX31_PIN_CSPI2_SS0__SS0, MX31_PIN_CSPI2_SS2__SS2,
- /* Atlas IRQ */
- MX31_PIN_GPIO1_3__GPIO1_3,
- /* SPI2 */
- MX31_PIN_CSPI3_MOSI__MOSI, MX31_PIN_CSPI3_MISO__MISO,
- MX31_PIN_CSPI3_SCLK__SCLK, MX31_PIN_CSPI3_SPI_RDY__SPI_RDY,
- MX31_PIN_CSPI2_SS1__CSPI3_SS1,
- /* SSI */
- MX31_PIN_STXD4__STXD4, MX31_PIN_SRXD4__SRXD4,
- MX31_PIN_SCK4__SCK4, MX31_PIN_SFS4__SFS4,
-};
-
-static struct physmap_flash_data mx31moboard_flash_data = {
- .width = 2,
-};
-
-static struct resource mx31moboard_flash_resource = {
- .start = 0xa0000000,
- .end = 0xa1ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device mx31moboard_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &mx31moboard_flash_data,
- },
- .resource = &mx31moboard_flash_resource,
- .num_resources = 1,
-};
-
-static void __init moboard_uart0_init(void)
-{
- if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack")) {
- gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
- gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
- }
-}
-
-static const struct imxuart_platform_data uart0_pdata __initconst = {
-};
-
-static const struct imxuart_platform_data uart4_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data moboard_i2c0_data __initconst = {
- .bitrate = 400000,
-};
-
-static const struct imxi2c_platform_data moboard_i2c1_data __initconst = {
- .bitrate = 100000,
-};
-
-static struct regulator_consumer_supply sdhc_consumers[] = {
- {
- .dev_name = "imx31-mmc.0",
- .supply = "sdhc0_vcc",
- },
- {
- .dev_name = "imx31-mmc.1",
- .supply = "sdhc1_vcc",
- },
-};
-
-static struct regulator_init_data sdhc_vreg_data = {
- .constraints = {
- .min_uV = 2700000,
- .max_uV = 3000000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_FAST,
- .always_on = 0,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(sdhc_consumers),
- .consumer_supplies = sdhc_consumers,
-};
-
-static struct regulator_consumer_supply cam_consumers[] = {
- {
- .dev_name = "mx3_camera.0",
- .supply = "cam_vcc",
- },
-};
-
-static struct regulator_init_data cam_vreg_data = {
- .constraints = {
- .min_uV = 2700000,
- .max_uV = 3000000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_FAST,
- .always_on = 0,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(cam_consumers),
- .consumer_supplies = cam_consumers,
-};
-
-static struct mc13xxx_regulator_init_data moboard_regulators[] = {
- {
- .id = MC13783_REG_VMMC1,
- .init_data = &sdhc_vreg_data,
- },
- {
- .id = MC13783_REG_VCAM,
- .init_data = &cam_vreg_data,
- },
-};
-
-static struct mc13xxx_led_platform_data moboard_led[] = {
- {
- .id = MC13783_LED_R1,
- .name = "coreboard-led-4:red",
- },
- {
- .id = MC13783_LED_G1,
- .name = "coreboard-led-4:green",
- },
- {
- .id = MC13783_LED_B1,
- .name = "coreboard-led-4:blue",
- },
- {
- .id = MC13783_LED_R2,
- .name = "coreboard-led-5:red",
- },
- {
- .id = MC13783_LED_G2,
- .name = "coreboard-led-5:green",
- },
- {
- .id = MC13783_LED_B2,
- .name = "coreboard-led-5:blue",
- },
-};
-
-static struct mc13xxx_leds_platform_data moboard_leds = {
- .num_leds = ARRAY_SIZE(moboard_led),
- .led = moboard_led,
- .led_control[0] = MC13783_LED_C0_ENABLE | MC13783_LED_C0_ABMODE(0),
- .led_control[1] = MC13783_LED_C1_SLEWLIM,
- .led_control[2] = MC13783_LED_C2_SLEWLIM,
- .led_control[3] = MC13783_LED_C3_PERIOD(0) |
- MC13783_LED_C3_CURRENT_R1(2) |
- MC13783_LED_C3_CURRENT_G1(2) |
- MC13783_LED_C3_CURRENT_B1(2),
- .led_control[4] = MC13783_LED_C4_PERIOD(0) |
- MC13783_LED_C4_CURRENT_R2(3) |
- MC13783_LED_C4_CURRENT_G2(3) |
- MC13783_LED_C4_CURRENT_B2(3),
-};
-
-static struct mc13xxx_buttons_platform_data moboard_buttons = {
- .b1on_flags = MC13783_BUTTON_DBNC_750MS | MC13783_BUTTON_ENABLE |
- MC13783_BUTTON_POL_INVERT,
- .b1on_key = KEY_POWER,
-};
-
-static struct mc13xxx_codec_platform_data moboard_codec = {
- .dac_ssi_port = MC13783_SSI1_PORT,
- .adc_ssi_port = MC13783_SSI1_PORT,
-};
-
-static struct mc13xxx_platform_data moboard_pmic = {
- .regulators = {
- .regulators = moboard_regulators,
- .num_regulators = ARRAY_SIZE(moboard_regulators),
- },
- .leds = &moboard_leds,
- .buttons = &moboard_buttons,
- .codec = &moboard_codec,
- .flags = MC13XXX_USE_RTC | MC13XXX_USE_ADC | MC13XXX_USE_CODEC,
-};
-
-static struct imx_ssi_platform_data moboard_ssi_pdata = {
- .flags = IMX_SSI_DMA | IMX_SSI_NET,
-};
-
-static struct spi_board_info moboard_spi_board_info[] __initdata = {
- {
- .modalias = "mc13783",
- /* irq number is run-time assigned */
- .max_speed_hz = 300000,
- .bus_num = 1,
- .chip_select = 0,
- .platform_data = &moboard_pmic,
- .mode = SPI_CS_HIGH,
- },
-};
-
-#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
-#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)
-
-static int moboard_sdhc1_get_ro(struct device *dev)
-{
- return !gpio_get_value(SDHC1_WP);
-}
-
-static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
- void *data)
-{
- int ret;
-
- ret = gpio_request(SDHC1_CD, "sdhc-detect");
- if (ret)
- return ret;
-
- gpio_direction_input(SDHC1_CD);
-
- ret = gpio_request(SDHC1_WP, "sdhc-wp");
- if (ret)
- goto err_gpio_free;
- gpio_direction_input(SDHC1_WP);
-
- ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "sdhc1-card-detect", data);
- if (ret)
- goto err_gpio_free_2;
-
- return 0;
-
-err_gpio_free_2:
- gpio_free(SDHC1_WP);
-err_gpio_free:
- gpio_free(SDHC1_CD);
-
- return ret;
-}
-
-static void moboard_sdhc1_exit(struct device *dev, void *data)
-{
- free_irq(gpio_to_irq(SDHC1_CD), data);
- gpio_free(SDHC1_WP);
- gpio_free(SDHC1_CD);
-}
-
-static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
- .get_ro = moboard_sdhc1_get_ro,
- .init = moboard_sdhc1_init,
- .exit = moboard_sdhc1_exit,
-};
-
-/*
- * this pin is dedicated for all mx31moboard systems, so we do it here
- */
-#define USB_RESET_B IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
- PAD_CTL_ODE_CMOS)
-
-#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
-#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
-
-static void usb_xcvr_reset(void)
-{
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG | PAD_CTL_100K_PU);
-
- mxc_iomux_set_gpr(MUX_PGP_UH2, true);
- mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG | PAD_CTL_100K_PD);
-
- gpio_request(OTG_EN_B, "usb-udc-en");
- gpio_direction_output(OTG_EN_B, 0);
- gpio_request(USBH2_EN_B, "usbh2-en");
- gpio_direction_output(USBH2_EN_B, 0);
-
- gpio_request(USB_RESET_B, "usb-reset");
- gpio_direction_output(USB_RESET_B, 0);
- mdelay(1);
- gpio_set_value(USB_RESET_B, 1);
- mdelay(1);
-}
-
-static int moboard_usbh2_init_hw(struct platform_device *pdev)
-{
- return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
-}
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
- .init = moboard_usbh2_init_hw,
- .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-};
-
-static int __init moboard_usbh2_init(void)
-{
- struct platform_device *pdev;
-
- usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT);
- if (!usbh2_pdata.otg)
- return -ENODEV;
-
- pdev = imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-
- return PTR_ERR_OR_ZERO(pdev);
-}
-
-static const struct gpio_led mx31moboard_leds[] __initconst = {
- {
- .name = "coreboard-led-0:red:running",
- .default_trigger = "heartbeat",
- .gpio = IOMUX_TO_GPIO(MX31_PIN_SVEN0),
- }, {
- .name = "coreboard-led-1:red",
- .gpio = IOMUX_TO_GPIO(MX31_PIN_STX0),
- }, {
- .name = "coreboard-led-2:red",
- .gpio = IOMUX_TO_GPIO(MX31_PIN_SRX0),
- }, {
- .name = "coreboard-led-3:red",
- .gpio = IOMUX_TO_GPIO(MX31_PIN_SIMPD0),
- },
-};
-
-static const struct gpio_led_platform_data mx31moboard_led_pdata __initconst = {
- .num_leds = ARRAY_SIZE(mx31moboard_leds),
- .leds = mx31moboard_leds,
-};
-
-static struct platform_device *devices[] __initdata = {
- &mx31moboard_flash,
-};
-
-static struct mx3_camera_pdata camera_pdata __initdata = {
- .flags = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
- .mclk_10khz = 4800,
-};
-
-static phys_addr_t mx3_camera_base __initdata;
-#define MX3_CAMERA_BUF_SIZE SZ_4M
-
-static int __init mx31moboard_init_cam(void)
-{
- int ret;
- struct platform_device *pdev;
-
- imx31_add_ipu_core();
-
- pdev = imx31_alloc_mx3_camera(&camera_pdata);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
-
- ret = dma_declare_coherent_memory(&pdev->dev,
- mx3_camera_base, mx3_camera_base,
- MX3_CAMERA_BUF_SIZE);
- if (ret)
- goto err;
-
- ret = platform_device_add(pdev);
- if (ret)
-err:
- platform_device_put(pdev);
-
- return ret;
-
-}
-
-static void mx31moboard_poweroff(void)
-{
- struct clk *clk = clk_get_sys("imx2-wdt.0", NULL);
-
- if (!IS_ERR(clk))
- clk_prepare_enable(clk);
-
- mxc_iomux_mode(MX31_PIN_WATCHDOG_RST__WATCHDOG_RST);
-
- imx_writew(1 << 6 | 1 << 2, MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
-}
-
-static int mx31moboard_baseboard;
-core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
-
-/*
- * Board specific initialization.
- */
-static void __init mx31moboard_init(void)
-{
- imx31_soc_init();
-
- mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
- "moboard");
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- imx31_add_imx2_wdt();
-
- imx31_add_imx_uart0(&uart0_pdata);
- imx31_add_imx_uart4(&uart4_pdata);
-
- imx31_add_imx_i2c0(&moboard_i2c0_data);
- imx31_add_imx_i2c1(&moboard_i2c1_data);
-
- imx31_add_spi_imx1(NULL);
- imx31_add_spi_imx2(NULL);
-
- mx31moboard_init_cam();
-
- imx31_add_imx_ssi(0, &moboard_ssi_pdata);
-
- pm_power_off = mx31moboard_poweroff;
-}
-
-static void __init mx31moboard_late(void)
-{
- gpio_led_register_device(-1, &mx31moboard_led_pdata);
-
- moboard_uart0_init();
-
- gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
- gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
- moboard_spi_board_info[0].irq =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
- spi_register_board_info(moboard_spi_board_info,
- ARRAY_SIZE(moboard_spi_board_info));
-
- imx31_add_mxc_mmc(0, &sdhc1_pdata);
-
- usb_xcvr_reset();
- moboard_usbh2_init();
-
- imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
-
- switch (mx31moboard_baseboard) {
- case MX31NOBOARD:
- break;
- case MX31DEVBOARD:
- mx31moboard_devboard_init();
- break;
- case MX31MARXBOT:
- mx31moboard_marxbot_init();
- break;
- case MX31SMARTBOT:
- case MX31EYEBOT:
- mx31moboard_smartbot_init(mx31moboard_baseboard);
- break;
- default:
- printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
- mx31moboard_baseboard);
- }
-}
-
-static void __init mx31moboard_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-static void __init mx31moboard_reserve(void)
-{
- /* reserve 4 MiB for mx3-camera */
- mx3_camera_base = arm_memblock_steal(MX3_CAMERA_BUF_SIZE,
- MX3_CAMERA_BUF_SIZE);
-}
-
-MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
- /* Maintainer: Philippe Retornaz, EPFL Mobots group */
- .atag_offset = 0x100,
- .reserve = mx31moboard_reserve,
- .map_io = mx31_map_io,
- .init_early = imx31_init_early,
- .init_irq = mx31_init_irq,
- .init_time = mx31moboard_timer_init,
- .init_machine = mx31moboard_init,
- .init_late = mx31moboard_late,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
deleted file mode 100644
index 802e0abe4568..000000000000
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ /dev/null
@@ -1,516 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * Copyright (C) 2011 Meprolight, Ltd.
- * Alex Gershgorin <alexg@meprolight.com>
- *
- * Modified from i.MX31 3-Stack Development System
- */
-
-/*
- * This machine is known as:
- * - i.MX35 3-Stack Development System
- * - i.MX35 Platform Development Kit (i.MX35 PDK)
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-#include <linux/usb/otg.h>
-
-#include <linux/mtd/physmap.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include <video/platform_lcd.h>
-
-#include "3ds_debugboard.h"
-#include "common.h"
-#include "devices-imx35.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx35.h"
-
-#define GPIO_MC9S08DZ60_GPS_ENABLE 0
-#define GPIO_MC9S08DZ60_HDD_ENABLE 4
-#define GPIO_MC9S08DZ60_WIFI_ENABLE 5
-#define GPIO_MC9S08DZ60_LCD_ENABLE 6
-#define GPIO_MC9S08DZ60_SPEAKER_ENABLE 8
-
-static const struct fb_videomode fb_modedb[] = {
- {
- /* 800x480 @ 55 Hz */
- .name = "Ceramate-CLAA070VC01",
- .refresh = 55,
- .xres = 800,
- .yres = 480,
- .pixclock = 40000,
- .left_margin = 40,
- .right_margin = 40,
- .upper_margin = 5,
- .lower_margin = 5,
- .hsync_len = 20,
- .vsync_len = 10,
- .sync = FB_SYNC_OE_ACT_HIGH,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- },
-};
-
-static struct mx3fb_platform_data mx3fb_pdata __initdata = {
- .name = "Ceramate-CLAA070VC01",
- .mode = fb_modedb,
- .num_modes = ARRAY_SIZE(fb_modedb),
-};
-
-static struct i2c_board_info __initdata i2c_devices_3ds[] = {
- {
- I2C_BOARD_INFO("mc9s08dz60", 0x69),
- },
-};
-
-static int lcd_power_gpio = -ENXIO;
-
-static int mc9s08dz60_gpiochip_match(struct gpio_chip *chip, void *data)
-{
- return !strcmp(chip->label, data);
-}
-
-static void mx35_3ds_lcd_set_power(
- struct plat_lcd_data *pd, unsigned int power)
-{
- struct gpio_chip *chip;
-
- if (!gpio_is_valid(lcd_power_gpio)) {
- chip = gpiochip_find(
- "mc9s08dz60", mc9s08dz60_gpiochip_match);
- if (chip) {
- lcd_power_gpio =
- chip->base + GPIO_MC9S08DZ60_LCD_ENABLE;
- if (gpio_request(lcd_power_gpio, "lcd_power") < 0) {
- pr_err("error: gpio already requested!\n");
- lcd_power_gpio = -ENXIO;
- }
- } else {
- pr_err("error: didn't find mc9s08dz60 gpio chip\n");
- }
- }
-
- if (gpio_is_valid(lcd_power_gpio))
- gpio_set_value_cansleep(lcd_power_gpio, power);
-}
-
-static struct plat_lcd_data mx35_3ds_lcd_data = {
- .set_power = mx35_3ds_lcd_set_power,
-};
-
-static struct platform_device mx35_3ds_lcd = {
- .name = "platform-lcd",
- .dev.platform_data = &mx35_3ds_lcd_data,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct physmap_flash_data mx35pdk_flash_data = {
- .width = 2,
-};
-
-static struct resource mx35pdk_flash_resource = {
- .start = MX35_CS0_BASE_ADDR,
- .end = MX35_CS0_BASE_ADDR + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device mx35pdk_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &mx35pdk_flash_data,
- },
- .resource = &mx35pdk_flash_resource,
- .num_resources = 1,
-};
-
-static const struct mxc_nand_platform_data mx35pdk_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
- .flash_bbt = 1,
-};
-
-static struct platform_device *devices[] __initdata = {
- &mx35pdk_flash,
-};
-
-static const iomux_v3_cfg_t mx35pdk_pads[] __initconst = {
- /* UART1 */
- MX35_PAD_CTS1__UART1_CTS,
- MX35_PAD_RTS1__UART1_RTS,
- MX35_PAD_TXD1__UART1_TXD_MUX,
- MX35_PAD_RXD1__UART1_RXD_MUX,
- /* FEC */
- MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
- MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
- MX35_PAD_FEC_RX_DV__FEC_RX_DV,
- MX35_PAD_FEC_COL__FEC_COL,
- MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
- MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
- MX35_PAD_FEC_TX_EN__FEC_TX_EN,
- MX35_PAD_FEC_MDC__FEC_MDC,
- MX35_PAD_FEC_MDIO__FEC_MDIO,
- MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
- MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
- MX35_PAD_FEC_CRS__FEC_CRS,
- MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
- MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
- MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
- MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
- MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
- MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
- /* USBOTG */
- MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
- MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
- /* USBH1 */
- MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
- MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
- /* SDCARD */
- MX35_PAD_SD1_CMD__ESDHC1_CMD,
- MX35_PAD_SD1_CLK__ESDHC1_CLK,
- MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
- MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
- MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
- MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
- /* I2C1 */
- MX35_PAD_I2C1_CLK__I2C1_SCL,
- MX35_PAD_I2C1_DAT__I2C1_SDA,
- /* Display */
- MX35_PAD_LD0__IPU_DISPB_DAT_0,
- MX35_PAD_LD1__IPU_DISPB_DAT_1,
- MX35_PAD_LD2__IPU_DISPB_DAT_2,
- MX35_PAD_LD3__IPU_DISPB_DAT_3,
- MX35_PAD_LD4__IPU_DISPB_DAT_4,
- MX35_PAD_LD5__IPU_DISPB_DAT_5,
- MX35_PAD_LD6__IPU_DISPB_DAT_6,
- MX35_PAD_LD7__IPU_DISPB_DAT_7,
- MX35_PAD_LD8__IPU_DISPB_DAT_8,
- MX35_PAD_LD9__IPU_DISPB_DAT_9,
- MX35_PAD_LD10__IPU_DISPB_DAT_10,
- MX35_PAD_LD11__IPU_DISPB_DAT_11,
- MX35_PAD_LD12__IPU_DISPB_DAT_12,
- MX35_PAD_LD13__IPU_DISPB_DAT_13,
- MX35_PAD_LD14__IPU_DISPB_DAT_14,
- MX35_PAD_LD15__IPU_DISPB_DAT_15,
- MX35_PAD_LD16__IPU_DISPB_DAT_16,
- MX35_PAD_LD17__IPU_DISPB_DAT_17,
- MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
- MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
- MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
- MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
- MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
- MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
- MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
- /*PMIC IRQ*/
- MX35_PAD_GPIO2_0__GPIO2_0,
-};
-
-static struct regulator_consumer_supply sw1_consumers[] = {
- {
- .supply = "cpu_vcc",
- }
-};
-
-static struct regulator_consumer_supply vcam_consumers[] = {
- /* sgtl5000 */
- REGULATOR_SUPPLY("VDDA", "0-000a"),
-};
-
-static struct regulator_init_data sw1_init = {
- .constraints = {
- .name = "SW1",
- .min_uV = 600000,
- .max_uV = 1375000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .valid_modes_mask = 0,
- .always_on = 1,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(sw1_consumers),
- .consumer_supplies = sw1_consumers,
-};
-
-static struct regulator_init_data sw2_init = {
- .constraints = {
- .name = "SW2",
- .always_on = 1,
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data sw3_init = {
- .constraints = {
- .name = "SW3",
- .always_on = 1,
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data sw4_init = {
- .constraints = {
- .name = "SW4",
- .always_on = 1,
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data viohi_init = {
- .constraints = {
- .name = "VIOHI",
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data vusb_init = {
- .constraints = {
- .name = "VUSB",
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data vdig_init = {
- .constraints = {
- .name = "VDIG",
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data vpll_init = {
- .constraints = {
- .name = "VPLL",
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data vusb2_init = {
- .constraints = {
- .name = "VUSB2",
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data vvideo_init = {
- .constraints = {
- .name = "VVIDEO",
- .boot_on = 1
- }
-};
-
-static struct regulator_init_data vcam_init = {
- .constraints = {
- .name = "VCAM",
- .min_uV = 2500000,
- .max_uV = 3000000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL,
- .boot_on = 1
- },
- .num_consumer_supplies = ARRAY_SIZE(vcam_consumers),
- .consumer_supplies = vcam_consumers,
-};
-
-static struct regulator_init_data vgen1_init = {
- .constraints = {
- .name = "VGEN1",
- }
-};
-
-static struct regulator_init_data vgen2_init = {
- .constraints = {
- .name = "VGEN2",
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data vgen3_init = {
- .constraints = {
- .name = "VGEN3",
- }
-};
-
-static struct mc13xxx_regulator_init_data mx35_3ds_regulators[] = {
- { .id = MC13892_SW1, .init_data = &sw1_init },
- { .id = MC13892_SW2, .init_data = &sw2_init },
- { .id = MC13892_SW3, .init_data = &sw3_init },
- { .id = MC13892_SW4, .init_data = &sw4_init },
- { .id = MC13892_VIOHI, .init_data = &viohi_init },
- { .id = MC13892_VPLL, .init_data = &vpll_init },
- { .id = MC13892_VDIG, .init_data = &vdig_init },
- { .id = MC13892_VUSB2, .init_data = &vusb2_init },
- { .id = MC13892_VVIDEO, .init_data = &vvideo_init },
- { .id = MC13892_VCAM, .init_data = &vcam_init },
- { .id = MC13892_VGEN1, .init_data = &vgen1_init },
- { .id = MC13892_VGEN2, .init_data = &vgen2_init },
- { .id = MC13892_VGEN3, .init_data = &vgen3_init },
- { .id = MC13892_VUSB, .init_data = &vusb_init },
-};
-
-static struct mc13xxx_platform_data mx35_3ds_mc13892_data = {
- .flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN,
- .regulators = {
- .num_regulators = ARRAY_SIZE(mx35_3ds_regulators),
- .regulators = mx35_3ds_regulators,
- },
-};
-
-#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0)
-
-static struct i2c_board_info mx35_3ds_i2c_mc13892 = {
-
- I2C_BOARD_INFO("mc13892", 0x08),
- .platform_data = &mx35_3ds_mc13892_data,
- /* irq number is run-time assigned */
-};
-
-static void __init imx35_3ds_init_mc13892(void)
-{
- int ret = gpio_request_one(GPIO_PMIC_INT, GPIOF_DIR_IN, "pmic irq");
-
- if (ret) {
- pr_err("failed to get pmic irq: %d\n", ret);
- return;
- }
-
- mx35_3ds_i2c_mc13892.irq = gpio_to_irq(GPIO_PMIC_INT);
- i2c_register_board_info(0, &mx35_3ds_i2c_mc13892, 1);
-}
-
-static int mx35_3ds_otg_init(struct platform_device *pdev)
-{
- return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
-}
-
-/* OTG config */
-static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_UTMI_WIDE,
- .workaround = FLS_USB2_WORKAROUND_ENGCM09152,
-/*
- * ENGCM09152 also requires a hardware change.
- * Please check the MX35 Chip Errata document for details.
- */
-};
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
- .init = mx35_3ds_otg_init,
- .portsc = MXC_EHCI_MODE_UTMI,
-};
-
-static int mx35_3ds_usbh_init(struct platform_device *pdev)
-{
- return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
- MXC_EHCI_INTERNAL_PHY);
-}
-
-/* USB HOST config */
-static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
- .init = mx35_3ds_usbh_init,
- .portsc = MXC_EHCI_MODE_SERIAL,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init mx35_3ds_otg_mode(char *options)
-{
- if (!strcmp(options, "host"))
- otg_mode_host = true;
- else if (!strcmp(options, "device"))
- otg_mode_host = false;
- else
- pr_info("otg_mode neither \"host\" nor \"device\". "
- "Defaulting to device\n");
- return 1;
-}
-__setup("otg_mode=", mx35_3ds_otg_mode);
-
-static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = {
- .bitrate = 100000,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init mx35_3ds_init(void)
-{
- imx35_soc_init();
-
- mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
-
- imx35_add_fec(NULL);
- imx35_add_imx2_wdt();
- imx35_add_mxc_rtc();
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- imx35_add_imx_uart0(&uart_pdata);
-
- if (otg_mode_host)
- imx35_add_mxc_ehci_otg(&otg_pdata);
-
- imx35_add_mxc_ehci_hs(&usb_host_pdata);
-
- if (!otg_mode_host)
- imx35_add_fsl_usb2_udc(&usb_otg_pdata);
-
- imx35_add_mxc_nand(&mx35pdk_nand_board_info);
- imx35_add_sdhci_esdhc_imx(0, NULL);
-
- imx35_add_imx_i2c0(&mx35_3ds_i2c0_data);
-
- i2c_register_board_info(
- 0, i2c_devices_3ds, ARRAY_SIZE(i2c_devices_3ds));
-
- imx35_add_ipu_core();
-}
-
-static void __init mx35_3ds_late_init(void)
-{
- struct platform_device *imx35_fb_pdev;
-
- if (mxc_expio_init(MX35_CS5_BASE_ADDR, IMX_GPIO_NR(1, 1)))
- pr_warn("Init of the debugboard failed, all "
- "devices on the debugboard are unusable.\n");
-
- imx35_fb_pdev = imx35_add_mx3_sdc_fb(&mx3fb_pdata);
- mx35_3ds_lcd.dev.parent = &imx35_fb_pdev->dev;
- platform_device_register(&mx35_3ds_lcd);
-
- imx35_3ds_init_mc13892();
-}
-
-static void __init mx35pdk_timer_init(void)
-{
- mx35_clocks_init();
-}
-
-MACHINE_START(MX35_3DS, "Freescale MX35PDK")
- /* Maintainer: Freescale Semiconductor, Inc */
- .atag_offset = 0x100,
- .map_io = mx35_map_io,
- .init_early = imx35_init_early,
- .init_irq = mx35_init_irq,
- .init_time = mx35pdk_timer_init,
- .init_machine = mx35_3ds_init,
- .init_late = mx35_3ds_late_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
deleted file mode 100644
index 27a3678e0658..000000000000
--- a/arch/arm/mach-imx/mach-pca100.c
+++ /dev/null
@@ -1,426 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de)
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/property.h>
-#include <linux/dma-mapping.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "devices-imx27.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx27.h"
-#include "ulpi.h"
-
-#define OTG_PHY_CS_GPIO (GPIO_PORTB + 23)
-#define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24)
-#define SPI1_SS0 (GPIO_PORTD + 28)
-#define SPI1_SS1 (GPIO_PORTD + 27)
-#define SD2_CD (GPIO_PORTC + 29)
-
-static const int pca100_pins[] __initconst = {
- /* UART1 */
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS,
- /* SDHC */
- PB4_PF_SD2_D0,
- PB5_PF_SD2_D1,
- PB6_PF_SD2_D2,
- PB7_PF_SD2_D3,
- PB8_PF_SD2_CMD,
- PB9_PF_SD2_CLK,
- SD2_CD | GPIO_GPIO | GPIO_IN,
- /* FEC */
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN,
- /* SSI1 */
- PC20_PF_SSI1_FS,
- PC21_PF_SSI1_RXD,
- PC22_PF_SSI1_TXD,
- PC23_PF_SSI1_CLK,
- /* onboard I2C */
- PC5_PF_I2C2_SDA,
- PC6_PF_I2C2_SCL,
- /* external I2C */
- PD17_PF_I2C_DATA,
- PD18_PF_I2C_CLK,
- /* SPI1 */
- PD25_PF_CSPI1_RDY,
- PD29_PF_CSPI1_SCLK,
- PD30_PF_CSPI1_MISO,
- PD31_PF_CSPI1_MOSI,
- /* OTG */
- OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
- PC7_PF_USBOTG_DATA5,
- PC8_PF_USBOTG_DATA6,
- PC9_PF_USBOTG_DATA0,
- PC10_PF_USBOTG_DATA2,
- PC11_PF_USBOTG_DATA1,
- PC12_PF_USBOTG_DATA4,
- PC13_PF_USBOTG_DATA3,
- PE0_PF_USBOTG_NXT,
- PE1_PF_USBOTG_STP,
- PE2_PF_USBOTG_DIR,
- PE24_PF_USBOTG_CLK,
- PE25_PF_USBOTG_DATA7,
- /* USBH2 */
- USBH2_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
- PA0_PF_USBH2_CLK,
- PA1_PF_USBH2_DIR,
- PA2_PF_USBH2_DATA7,
- PA3_PF_USBH2_NXT,
- PA4_PF_USBH2_STP,
- PD19_AF_USBH2_DATA4,
- PD20_AF_USBH2_DATA3,
- PD21_AF_USBH2_DATA6,
- PD22_AF_USBH2_DATA0,
- PD23_AF_USBH2_DATA2,
- PD24_AF_USBH2_DATA1,
- PD26_AF_USBH2_DATA5,
- /* display */
- PA5_PF_LSCLK,
- PA6_PF_LD0,
- PA7_PF_LD1,
- PA8_PF_LD2,
- PA9_PF_LD3,
- PA10_PF_LD4,
- PA11_PF_LD5,
- PA12_PF_LD6,
- PA13_PF_LD7,
- PA14_PF_LD8,
- PA15_PF_LD9,
- PA16_PF_LD10,
- PA17_PF_LD11,
- PA18_PF_LD12,
- PA19_PF_LD13,
- PA20_PF_LD14,
- PA21_PF_LD15,
- PA22_PF_LD16,
- PA23_PF_LD17,
- PA26_PF_PS,
- PA28_PF_HSYNC,
- PA29_PF_VSYNC,
- PA31_PF_OE_ACD,
- /* free GPIO */
- GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN, /* GPIO0_IRQ */
- GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN, /* GPIO1_IRQ */
- GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN, /* GPIO2_IRQ */
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct mxc_nand_platform_data
-pca100_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-static const struct imxi2c_platform_data pca100_i2c1_data __initconst = {
- .bitrate = 100000,
-};
-
-static const struct property_entry board_eeprom_properties[] = {
- PROPERTY_ENTRY_U32("pagesize", 32),
- { }
-};
-
-static struct i2c_board_info pca100_i2c_devices[] = {
- {
- I2C_BOARD_INFO("24c32", 0x52), /* E0=0, E1=1, E2=0 */
- .properties = board_eeprom_properties,
- }, {
- I2C_BOARD_INFO("pcf8563", 0x51),
- }, {
- I2C_BOARD_INFO("lm75", 0x4a),
- }
-};
-
-static struct spi_eeprom at25320 = {
- .name = "at25320an",
- .byte_len = 4096,
- .page_size = 32,
- .flags = EE_ADDR2,
-};
-
-static struct spi_board_info pca100_spi_board_info[] __initdata = {
- {
- .modalias = "at25",
- .max_speed_hz = 30000,
- .bus_num = 0,
- .chip_select = 1,
- .platform_data = &at25320,
- },
-};
-
-static struct gpiod_lookup_table pca100_spi0_gpiod_table = {
- .dev_id = "imx27-cspi.0", /* Actual device name for spi0 */
- .table = {
- /*
- * The i.MX27 has the i.MX21 GPIO controller, port D is
- * bank 3 and thus named "imx21-gpio.3".
- * SPI1_SS0 is GPIO_PORTD + 28
- * SPI1_SS1 is GPIO_PORTD + 27
- */
- GPIO_LOOKUP_IDX("imx21-gpio.3", 28, "cs", 0, GPIO_ACTIVE_LOW),
- GPIO_LOOKUP_IDX("imx21-gpio.3", 27, "cs", 1, GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-static void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
-{
- mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);
- gpio_set_value(GPIO_PORTC + 20, 1);
- udelay(2);
- gpio_set_value(GPIO_PORTC + 20, 0);
- mxc_gpio_mode(PC20_PF_SSI1_FS);
- msleep(2);
-}
-
-static void pca100_ac97_cold_reset(struct snd_ac97 *ac97)
-{
- mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT); /* FS */
- gpio_set_value(GPIO_PORTC + 20, 0);
- mxc_gpio_mode(GPIO_PORTC | 22 | GPIO_GPIO | GPIO_OUT); /* TX */
- gpio_set_value(GPIO_PORTC + 22, 0);
- mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_OUT); /* reset */
- gpio_set_value(GPIO_PORTC + 28, 0);
- udelay(10);
- gpio_set_value(GPIO_PORTC + 28, 1);
- mxc_gpio_mode(PC20_PF_SSI1_FS);
- mxc_gpio_mode(PC22_PF_SSI1_TXD);
- msleep(2);
-}
-
-static const struct imx_ssi_platform_data pca100_ssi_pdata __initconst = {
- .ac97_reset = pca100_ac97_cold_reset,
- .ac97_warm_reset = pca100_ac97_warm_reset,
- .flags = IMX_SSI_USE_AC97,
-};
-
-static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
- void *data)
-{
- int ret;
-
- ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq,
- IRQF_TRIGGER_FALLING, "imx-mmc-detect", data);
- if (ret)
- printk(KERN_ERR
- "pca100: Failed to request irq for sd/mmc detection\n");
-
- return ret;
-}
-
-static void pca100_sdhc2_exit(struct device *dev, void *data)
-{
- free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data);
-}
-
-static const struct imxmmc_platform_data sdhc_pdata __initconst = {
- .init = pca100_sdhc2_init,
- .exit = pca100_sdhc2_exit,
-};
-
-static int otg_phy_init(struct platform_device *pdev)
-{
- gpio_set_value(OTG_PHY_CS_GPIO, 0);
-
- mdelay(10);
-
- return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
- .init = otg_phy_init,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static int usbh2_phy_init(struct platform_device *pdev)
-{
- gpio_set_value(USBH2_PHY_CS_GPIO, 0);
-
- mdelay(10);
-
- return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
- .init = usbh2_phy_init,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_ULPI,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init pca100_otg_mode(char *options)
-{
- if (!strcmp(options, "host"))
- otg_mode_host = true;
- else if (!strcmp(options, "device"))
- otg_mode_host = false;
- else
- pr_info("otg_mode neither \"host\" nor \"device\". "
- "Defaulting to device\n");
- return 1;
-}
-__setup("otg_mode=", pca100_otg_mode);
-
-/* framebuffer info */
-static struct imx_fb_videomode pca100_fb_modes[] = {
- {
- .mode = {
- .name = "EMERGING-ETV570G0DHU",
- .refresh = 60,
- .xres = 640,
- .yres = 480,
- .pixclock = 39722, /* in ps (25.175 MHz) */
- .hsync_len = 30,
- .left_margin = 114,
- .right_margin = 16,
- .vsync_len = 3,
- .upper_margin = 32,
- .lower_margin = 0,
- },
- /*
- * TFT
- * Pixel pol active high
- * HSYNC active low
- * VSYNC active low
- * use HSYNC for ACD count
- * line clock disable while idle
- * always enable line clock even if no data
- */
- .pcr = 0xf0c08080,
- .bpp = 16,
- },
-};
-
-static const struct imx_fb_platform_data pca100_fb_data __initconst = {
- .mode = pca100_fb_modes,
- .num_modes = ARRAY_SIZE(pca100_fb_modes),
-
- .pwmr = 0x00A903FF,
- .lscr1 = 0x00120300,
- .dmacr = 0x00020010,
-};
-
-static void __init pca100_init(void)
-{
- int ret;
-
- imx27_soc_init();
-
- ret = mxc_gpio_setup_multiple_pins(pca100_pins,
- ARRAY_SIZE(pca100_pins), "PCA100");
- if (ret)
- printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
-
- imx27_add_imx_uart0(&uart_pdata);
-
- imx27_add_mxc_nand(&pca100_nand_board_info);
-
- /* only the i2c master 1 is used on this CPU card */
- i2c_register_board_info(1, pca100_i2c_devices,
- ARRAY_SIZE(pca100_i2c_devices));
-
- imx27_add_imx_i2c(1, &pca100_i2c1_data);
-
- mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN);
- mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN);
- spi_register_board_info(pca100_spi_board_info,
- ARRAY_SIZE(pca100_spi_board_info));
- imx27_add_spi_imx0(&pca100_spi0_gpiod_table);
-
- imx27_add_imx_fb(&pca100_fb_data);
-
- imx27_add_fec(NULL);
- imx27_add_imx2_wdt();
- imx27_add_mxc_w1();
-}
-
-static void __init pca100_late_init(void)
-{
- imx27_add_imx_ssi(0, &pca100_ssi_pdata);
-
- imx27_add_mxc_mmc(1, &sdhc_pdata);
-
- gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
- gpio_direction_output(OTG_PHY_CS_GPIO, 1);
- gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs");
- gpio_direction_output(USBH2_PHY_CS_GPIO, 1);
-
- if (otg_mode_host) {
- otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT);
-
- if (otg_pdata.otg)
- imx27_add_mxc_ehci_otg(&otg_pdata);
- } else {
- gpio_set_value(OTG_PHY_CS_GPIO, 0);
- imx27_add_fsl_usb2_udc(&otg_device_pdata);
- }
-
- usbh2_pdata.otg = imx_otg_ulpi_create(
- ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
- if (usbh2_pdata.otg)
- imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
-}
-
-static void __init pca100_timer_init(void)
-{
- mx27_clocks_init(26000000);
-}
-
-MACHINE_START(PCA100, "phyCARD-i.MX27")
- .atag_offset = 0x100,
- .map_io = mx27_map_io,
- .init_early = imx27_init_early,
- .init_irq = mx27_init_irq,
- .init_machine = pca100_init,
- .init_late = pca100_late_init,
- .init_time = pca100_timer_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
deleted file mode 100644
index c7d23e9d4f8b..000000000000
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ /dev/null
@@ -1,585 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2008 Sascha Hauer, Pengutronix
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/property.h>
-#include <linux/delay.h>
-#include <linux/spi/spi.h>
-#include <linux/irq.h>
-#include <linux/can/platform/sja1000.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <linux/gfp.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx31.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-#include "pcm037.h"
-#include "ulpi.h"
-
-static enum pcm037_board_variant pcm037_instance = PCM037_PCM970;
-
-static int __init pcm037_variant_setup(char *str)
-{
- if (!strcmp("eet", str))
- pcm037_instance = PCM037_EET;
- else if (strcmp("pcm970", str))
- pr_warn("Unknown pcm037 baseboard variant %s\n", str);
-
- return 1;
-}
-
-/* Supported values: "pcm970" (default) and "eet" */
-__setup("pcm037_variant=", pcm037_variant_setup);
-
-enum pcm037_board_variant pcm037_variant(void)
-{
- return pcm037_instance;
-}
-
-/* UART1 with RTS/CTS handshake signals */
-static unsigned int pcm037_uart1_handshake_pins[] = {
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1,
-};
-
-/* UART1 without RTS/CTS handshake signals */
-static unsigned int pcm037_uart1_pins[] = {
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1,
-};
-
-static unsigned int pcm037_pins[] = {
- /* I2C */
- MX31_PIN_CSPI2_MOSI__SCL,
- MX31_PIN_CSPI2_MISO__SDA,
- MX31_PIN_CSPI2_SS2__I2C3_SDA,
- MX31_PIN_CSPI2_SCLK__I2C3_SCL,
- /* SDHC1 */
- MX31_PIN_SD1_DATA3__SD1_DATA3,
- MX31_PIN_SD1_DATA2__SD1_DATA2,
- MX31_PIN_SD1_DATA1__SD1_DATA1,
- MX31_PIN_SD1_DATA0__SD1_DATA0,
- MX31_PIN_SD1_CLK__SD1_CLK,
- MX31_PIN_SD1_CMD__SD1_CMD,
- IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO), /* card detect */
- IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), /* write protect */
- /* SPI1 */
- MX31_PIN_CSPI1_MOSI__MOSI,
- MX31_PIN_CSPI1_MISO__MISO,
- MX31_PIN_CSPI1_SCLK__SCLK,
- MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
- MX31_PIN_CSPI1_SS0__SS0,
- MX31_PIN_CSPI1_SS1__SS1,
- MX31_PIN_CSPI1_SS2__SS2,
- /* UART2 */
- MX31_PIN_TXD2__TXD2,
- MX31_PIN_RXD2__RXD2,
- MX31_PIN_CTS2__CTS2,
- MX31_PIN_RTS2__RTS2,
- /* UART3 */
- MX31_PIN_CSPI3_MOSI__RXD3,
- MX31_PIN_CSPI3_MISO__TXD3,
- MX31_PIN_CSPI3_SCLK__RTS3,
- MX31_PIN_CSPI3_SPI_RDY__CTS3,
- /* LAN9217 irq pin */
- IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
- /* Onewire */
- MX31_PIN_BATT_LINE__OWIRE,
- /* Framebuffer */
- MX31_PIN_LD0__LD0,
- MX31_PIN_LD1__LD1,
- MX31_PIN_LD2__LD2,
- MX31_PIN_LD3__LD3,
- MX31_PIN_LD4__LD4,
- MX31_PIN_LD5__LD5,
- MX31_PIN_LD6__LD6,
- MX31_PIN_LD7__LD7,
- MX31_PIN_LD8__LD8,
- MX31_PIN_LD9__LD9,
- MX31_PIN_LD10__LD10,
- MX31_PIN_LD11__LD11,
- MX31_PIN_LD12__LD12,
- MX31_PIN_LD13__LD13,
- MX31_PIN_LD14__LD14,
- MX31_PIN_LD15__LD15,
- MX31_PIN_LD16__LD16,
- MX31_PIN_LD17__LD17,
- MX31_PIN_VSYNC3__VSYNC3,
- MX31_PIN_HSYNC__HSYNC,
- MX31_PIN_FPSHIFT__FPSHIFT,
- MX31_PIN_DRDY0__DRDY0,
- MX31_PIN_D3_REV__D3_REV,
- MX31_PIN_CONTRAST__CONTRAST,
- MX31_PIN_D3_SPL__D3_SPL,
- MX31_PIN_D3_CLS__D3_CLS,
- MX31_PIN_LCS0__GPIO3_23,
- /* GPIO */
- IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO),
- /* OTG */
- MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
- MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
- MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
- MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
- MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
- MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
- MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
- MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
- MX31_PIN_USBOTG_CLK__USBOTG_CLK,
- MX31_PIN_USBOTG_DIR__USBOTG_DIR,
- MX31_PIN_USBOTG_NXT__USBOTG_NXT,
- MX31_PIN_USBOTG_STP__USBOTG_STP,
- /* USB host 2 */
- IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC),
-};
-
-static struct physmap_flash_data pcm037_flash_data = {
- .width = 2,
-};
-
-static struct resource pcm037_flash_resource = {
- .start = 0xa0000000,
- .end = 0xa1ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device pcm037_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &pcm037_flash_data,
- },
- .resource = &pcm037_flash_resource,
- .num_resources = 1,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct resource smsc911x_resources[] = {
- {
- .start = MX31_CS1_BASE_ADDR + 0x300,
- .end = MX31_CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- /* irq number is run-time assigned */
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },
-};
-
-static struct smsc911x_platform_config smsc911x_info = {
- .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY |
- SMSC911X_SAVE_MAC_ADDRESS,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device pcm037_eth = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_info,
- },
-};
-
-static struct platdata_mtd_ram pcm038_sram_data = {
- .bankwidth = 2,
-};
-
-static struct resource pcm038_sram_resource = {
- .start = MX31_CS4_BASE_ADDR,
- .end = MX31_CS4_BASE_ADDR + 512 * 1024 - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device pcm037_sram_device = {
- .name = "mtd-ram",
- .id = 0,
- .dev = {
- .platform_data = &pcm038_sram_data,
- },
- .num_resources = 1,
- .resource = &pcm038_sram_resource,
-};
-
-static const struct mxc_nand_platform_data
-pcm037_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-static const struct imxi2c_platform_data pcm037_i2c1_data __initconst = {
- .bitrate = 100000,
-};
-
-static const struct imxi2c_platform_data pcm037_i2c2_data __initconst = {
- .bitrate = 20000,
-};
-
-static const struct property_entry board_eeprom_properties[] = {
- PROPERTY_ENTRY_U32("pagesize", 32),
- { }
-};
-
-static struct i2c_board_info pcm037_i2c_devices[] = {
- {
- I2C_BOARD_INFO("24c32", 0x52), /* E0=0, E1=1, E2=0 */
- .properties = board_eeprom_properties,
- }, {
- I2C_BOARD_INFO("pcf8563", 0x51),
- }
-};
-
-/* Not connected by default */
-#ifdef PCM970_SDHC_RW_SWITCH
-static int pcm970_sdhc1_get_ro(struct device *dev)
-{
- return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_SFS6));
-}
-#endif
-
-#define SDHC1_GPIO_WP IOMUX_TO_GPIO(MX31_PIN_SFS6)
-#define SDHC1_GPIO_DET IOMUX_TO_GPIO(MX31_PIN_SCK6)
-
-static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
- void *data)
-{
- int ret;
-
- ret = gpio_request(SDHC1_GPIO_DET, "sdhc-detect");
- if (ret)
- return ret;
-
- gpio_direction_input(SDHC1_GPIO_DET);
-
-#ifdef PCM970_SDHC_RW_SWITCH
- ret = gpio_request(SDHC1_GPIO_WP, "sdhc-wp");
- if (ret)
- goto err_gpio_free;
- gpio_direction_input(SDHC1_GPIO_WP);
-#endif
-
- ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), detect_irq,
- IRQF_TRIGGER_FALLING, "sdhc-detect", data);
- if (ret)
- goto err_gpio_free_2;
-
- return 0;
-
-err_gpio_free_2:
-#ifdef PCM970_SDHC_RW_SWITCH
- gpio_free(SDHC1_GPIO_WP);
-err_gpio_free:
-#endif
- gpio_free(SDHC1_GPIO_DET);
-
- return ret;
-}
-
-static void pcm970_sdhc1_exit(struct device *dev, void *data)
-{
- free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), data);
- gpio_free(SDHC1_GPIO_DET);
- gpio_free(SDHC1_GPIO_WP);
-}
-
-static const struct imxmmc_platform_data sdhc_pdata __initconst = {
-#ifdef PCM970_SDHC_RW_SWITCH
- .get_ro = pcm970_sdhc1_get_ro,
-#endif
- .init = pcm970_sdhc1_init,
- .exit = pcm970_sdhc1_exit,
-};
-
-static struct platform_device *devices[] __initdata = {
- &pcm037_flash,
- &pcm037_sram_device,
-};
-
-static const struct fb_videomode fb_modedb[] = {
- {
- /* 240x320 @ 60 Hz Sharp */
- .name = "Sharp-LQ035Q7DH06-QVGA",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 185925,
- .left_margin = 9,
- .right_margin = 16,
- .upper_margin = 7,
- .lower_margin = 9,
- .hsync_len = 1,
- .vsync_len = 1,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
- FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- }, {
- /* 240x320 @ 60 Hz */
- .name = "TX090",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 38255,
- .left_margin = 144,
- .right_margin = 0,
- .upper_margin = 7,
- .lower_margin = 40,
- .hsync_len = 96,
- .vsync_len = 1,
- .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- }, {
- /* 240x320 @ 60 Hz */
- .name = "CMEL-OLED",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 185925,
- .left_margin = 9,
- .right_margin = 16,
- .upper_margin = 7,
- .lower_margin = 9,
- .hsync_len = 1,
- .vsync_len = 1,
- .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- },
-};
-
-static struct mx3fb_platform_data mx3fb_pdata = {
- .name = "Sharp-LQ035Q7DH06-QVGA",
- .mode = fb_modedb,
- .num_modes = ARRAY_SIZE(fb_modedb),
-};
-
-static struct resource pcm970_sja1000_resources[] = {
- {
- .start = MX31_CS5_BASE_ADDR,
- .end = MX31_CS5_BASE_ADDR + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- }, {
- /* irq number is run-time assigned */
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
- },
-};
-
-static struct sja1000_platform_data pcm970_sja1000_platform_data = {
- .osc_freq = 16000000,
- .ocr = OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL,
- .cdr = CDR_CBP,
-};
-
-static struct platform_device pcm970_sja1000 = {
- .name = "sja1000_platform",
- .dev = {
- .platform_data = &pcm970_sja1000_platform_data,
- },
- .resource = pcm970_sja1000_resources,
- .num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
-};
-
-static int pcm037_otg_init(struct platform_device *pdev)
-{
- return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
- .init = pcm037_otg_init,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static int pcm037_usbh2_init(struct platform_device *pdev)
-{
- return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
- .init = pcm037_usbh2_init,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_ULPI,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init pcm037_otg_mode(char *options)
-{
- if (!strcmp(options, "host"))
- otg_mode_host = true;
- else if (!strcmp(options, "device"))
- otg_mode_host = false;
- else
- pr_info("otg_mode neither \"host\" nor \"device\". "
- "Defaulting to device\n");
- return 1;
-}
-__setup("otg_mode=", pcm037_otg_mode);
-
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
-};
-
-/*
- * Board specific initialization.
- */
-static void __init pcm037_init(void)
-{
- imx31_soc_init();
-
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- mxc_iomux_set_gpr(MUX_PGP_UH2, 1);
-
- mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
- "pcm037");
-
-#define H2_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS \
- | PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
- mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, H2_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, H2_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, H2_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_STP, H2_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, H2_PAD_CFG); /* USBH2_DATA0 */
- mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, H2_PAD_CFG); /* USBH2_DATA1 */
- mxc_iomux_set_pad(MX31_PIN_SRXD6, H2_PAD_CFG); /* USBH2_DATA2 */
- mxc_iomux_set_pad(MX31_PIN_STXD6, H2_PAD_CFG); /* USBH2_DATA3 */
- mxc_iomux_set_pad(MX31_PIN_SFS3, H2_PAD_CFG); /* USBH2_DATA4 */
- mxc_iomux_set_pad(MX31_PIN_SCK3, H2_PAD_CFG); /* USBH2_DATA5 */
- mxc_iomux_set_pad(MX31_PIN_SRXD3, H2_PAD_CFG); /* USBH2_DATA6 */
- mxc_iomux_set_pad(MX31_PIN_STXD3, H2_PAD_CFG); /* USBH2_DATA7 */
-
- if (pcm037_variant() == PCM037_EET)
- mxc_iomux_setup_multiple_pins(pcm037_uart1_pins,
- ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1");
- else
- mxc_iomux_setup_multiple_pins(pcm037_uart1_handshake_pins,
- ARRAY_SIZE(pcm037_uart1_handshake_pins),
- "pcm037_uart1");
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- imx31_add_imx2_wdt();
- imx31_add_imx_uart0(&uart_pdata);
- /* XXX: should't this have .flags = 0 (i.e. no RTSCTS) on PCM037_EET? */
- imx31_add_imx_uart1(&uart_pdata);
- imx31_add_imx_uart2(&uart_pdata);
-
- imx31_add_mxc_w1();
-
- /* I2C adapters and devices */
- i2c_register_board_info(1, pcm037_i2c_devices,
- ARRAY_SIZE(pcm037_i2c_devices));
-
- imx31_add_imx_i2c1(&pcm037_i2c1_data);
- imx31_add_imx_i2c2(&pcm037_i2c2_data);
-
- imx31_add_mxc_nand(&pcm037_nand_board_info);
- imx31_add_ipu_core();
- imx31_add_mx3_sdc_fb(&mx3fb_pdata);
-
- if (otg_mode_host) {
- otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT);
- if (otg_pdata.otg)
- imx31_add_mxc_ehci_otg(&otg_pdata);
- }
-
- usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT);
- if (usbh2_pdata.otg)
- imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-
- if (!otg_mode_host)
- imx31_add_fsl_usb2_udc(&otg_device_pdata);
-}
-
-static void __init pcm037_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-static void __init pcm037_init_late(void)
-{
- int ret;
-
- /* LAN9217 IRQ pin */
- ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
- if (!ret) {
- gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
- smsc911x_resources[1].start =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
- smsc911x_resources[1].end =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
- platform_device_register(&pcm037_eth);
- } else {
- pr_warn("could not get LAN irq gpio\n");
- }
-
- imx31_add_mxc_mmc(0, &sdhc_pdata);
-
- pcm970_sja1000_resources[1].start =
- gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105)));
- pcm970_sja1000_resources[1].end =
- gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105)));
- platform_device_register(&pcm970_sja1000);
-
- pcm037_eet_init_devices();
-}
-
-MACHINE_START(PCM037, "Phytec Phycore pcm037")
- /* Maintainer: Pengutronix */
- .atag_offset = 0x100,
- .map_io = mx31_map_io,
- .init_early = imx31_init_early,
- .init_irq = mx31_init_irq,
- .init_time = pcm037_timer_init,
- .init_machine = pcm037_init,
- .init_late = pcm037_init_late,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm037_eet.c b/arch/arm/mach-imx/mach-pcm037_eet.c
deleted file mode 100644
index 8b0e03a595c1..000000000000
--- a/arch/arm/mach-imx/mach-pcm037_eet.c
+++ /dev/null
@@ -1,166 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2009
- * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
- */
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-
-#include <asm/mach-types.h>
-
-#include "pcm037.h"
-#include "common.h"
-#include "devices-imx31.h"
-#include "iomux-mx3.h"
-
-static unsigned int pcm037_eet_pins[] = {
- /* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
- IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO),
- /* GPIO keys */
- IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO), /* 0 */
- IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), /* 1 */
- IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO), /* 2 */
- IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO), /* 3 */
- IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO), /* 32 */
- IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO), /* 33 */
- IOMUX_MODE(MX31_PIN_SRX0, IOMUX_CONFIG_GPIO), /* 34 */
- IOMUX_MODE(MX31_PIN_SIMPD0, IOMUX_CONFIG_GPIO), /* 35 */
- IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO), /* 38 */
- IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_GPIO), /* 39 */
- IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_GPIO), /* 50 */
- IOMUX_MODE(MX31_PIN_KEY_ROW5, IOMUX_CONFIG_GPIO), /* 51 */
- IOMUX_MODE(MX31_PIN_KEY_ROW6, IOMUX_CONFIG_GPIO), /* 52 */
- IOMUX_MODE(MX31_PIN_KEY_ROW7, IOMUX_CONFIG_GPIO), /* 53 */
-
- /* LEDs */
- IOMUX_MODE(MX31_PIN_DTR_DTE1, IOMUX_CONFIG_GPIO), /* 44 */
- IOMUX_MODE(MX31_PIN_DSR_DTE1, IOMUX_CONFIG_GPIO), /* 45 */
- IOMUX_MODE(MX31_PIN_KEY_COL5, IOMUX_CONFIG_GPIO), /* 55 */
- IOMUX_MODE(MX31_PIN_KEY_COL6, IOMUX_CONFIG_GPIO), /* 56 */
-};
-
-/* SPI */
-static struct spi_board_info pcm037_spi_dev[] = {
- {
- .modalias = "dac124s085",
- .max_speed_hz = 400000,
- .bus_num = 0,
- .chip_select = 1, /* Index in pcm037_spi1_cs[] */
- .mode = SPI_CPHA,
- },
-};
-
-/* GPIO-keys input device */
-static struct gpio_keys_button pcm037_gpio_keys[] = {
- {
- .type = EV_KEY,
- .code = KEY_L,
- .gpio = 0,
- .desc = "Wheel Manual",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = KEY_A,
- .gpio = 1,
- .desc = "Wheel AF",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = KEY_V,
- .gpio = 2,
- .desc = "Wheel View",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = KEY_M,
- .gpio = 3,
- .desc = "Wheel Menu",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = KEY_UP,
- .gpio = 32,
- .desc = "Nav Pad Up",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = KEY_RIGHT,
- .gpio = 33,
- .desc = "Nav Pad Right",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = KEY_DOWN,
- .gpio = 34,
- .desc = "Nav Pad Down",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = KEY_LEFT,
- .gpio = 35,
- .desc = "Nav Pad Left",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = KEY_ENTER,
- .gpio = 38,
- .desc = "Nav Pad Ok",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = KEY_O,
- .gpio = 39,
- .desc = "Wheel Off",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = BTN_FORWARD,
- .gpio = 50,
- .desc = "Focus Forward",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = BTN_BACK,
- .gpio = 51,
- .desc = "Focus Backward",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = BTN_MIDDLE,
- .gpio = 52,
- .desc = "Release Half",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = BTN_EXTRA,
- .gpio = 53,
- .desc = "Release Full",
- .wakeup = 0,
- },
-};
-
-static const struct gpio_keys_platform_data
- pcm037_gpio_keys_platform_data __initconst = {
- .buttons = pcm037_gpio_keys,
- .nbuttons = ARRAY_SIZE(pcm037_gpio_keys),
- .rep = 0, /* No auto-repeat */
-};
-
-int __init pcm037_eet_init_devices(void)
-{
- if (pcm037_variant() != PCM037_EET)
- return 0;
-
- mxc_iomux_setup_multiple_pins(pcm037_eet_pins,
- ARRAY_SIZE(pcm037_eet_pins), "pcm037_eet");
-
- /* SPI */
- spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
- imx31_add_spi_imx0(NULL);
-
- imx_add_gpio_keys(&pcm037_gpio_keys_platform_data);
-
- return 0;
-}
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
deleted file mode 100644
index 017a50113005..000000000000
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ /dev/null
@@ -1,412 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2009 Sascha Hauer, Pengutronix
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/smc911x.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/property.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx35.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx35.h"
-#include "ulpi.h"
-
-static const struct fb_videomode fb_modedb[] = {
- {
- /* 240x320 @ 60 Hz */
- .name = "Sharp-LQ035Q7",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 185925,
- .left_margin = 9,
- .right_margin = 16,
- .upper_margin = 7,
- .lower_margin = 9,
- .hsync_len = 1,
- .vsync_len = 1,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- }, {
- /* 240x320 @ 60 Hz */
- .name = "TX090",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 38255,
- .left_margin = 144,
- .right_margin = 0,
- .upper_margin = 7,
- .lower_margin = 40,
- .hsync_len = 96,
- .vsync_len = 1,
- .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- },
-};
-
-static struct mx3fb_platform_data mx3fb_pdata __initdata = {
- .name = "Sharp-LQ035Q7",
- .mode = fb_modedb,
- .num_modes = ARRAY_SIZE(fb_modedb),
-};
-
-static struct physmap_flash_data pcm043_flash_data = {
- .width = 2,
-};
-
-static struct resource pcm043_flash_resource = {
- .start = 0xa0000000,
- .end = 0xa1ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device pcm043_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &pcm043_flash_data,
- },
- .resource = &pcm043_flash_resource,
- .num_resources = 1,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data pcm043_i2c0_data __initconst = {
- .bitrate = 50000,
-};
-
-static const struct property_entry board_eeprom_properties[] = {
- PROPERTY_ENTRY_U32("pagesize", 32),
- { }
-};
-
-static struct i2c_board_info pcm043_i2c_devices[] = {
- {
- I2C_BOARD_INFO("24c32", 0x52), /* E0=0, E1=1, E2=0 */
- .properties = board_eeprom_properties,
- }, {
- I2C_BOARD_INFO("pcf8563", 0x51),
- },
-};
-
-static struct platform_device *devices[] __initdata = {
- &pcm043_flash,
-};
-
-static const iomux_v3_cfg_t pcm043_pads[] __initconst = {
- /* UART1 */
- MX35_PAD_CTS1__UART1_CTS,
- MX35_PAD_RTS1__UART1_RTS,
- MX35_PAD_TXD1__UART1_TXD_MUX,
- MX35_PAD_RXD1__UART1_RXD_MUX,
- /* UART2 */
- MX35_PAD_CTS2__UART2_CTS,
- MX35_PAD_RTS2__UART2_RTS,
- MX35_PAD_TXD2__UART2_TXD_MUX,
- MX35_PAD_RXD2__UART2_RXD_MUX,
- /* FEC */
- MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
- MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
- MX35_PAD_FEC_RX_DV__FEC_RX_DV,
- MX35_PAD_FEC_COL__FEC_COL,
- MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
- MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
- MX35_PAD_FEC_TX_EN__FEC_TX_EN,
- MX35_PAD_FEC_MDC__FEC_MDC,
- MX35_PAD_FEC_MDIO__FEC_MDIO,
- MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
- MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
- MX35_PAD_FEC_CRS__FEC_CRS,
- MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
- MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
- MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
- MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
- MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
- MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
- /* I2C1 */
- MX35_PAD_I2C1_CLK__I2C1_SCL,
- MX35_PAD_I2C1_DAT__I2C1_SDA,
- /* Display */
- MX35_PAD_LD0__IPU_DISPB_DAT_0,
- MX35_PAD_LD1__IPU_DISPB_DAT_1,
- MX35_PAD_LD2__IPU_DISPB_DAT_2,
- MX35_PAD_LD3__IPU_DISPB_DAT_3,
- MX35_PAD_LD4__IPU_DISPB_DAT_4,
- MX35_PAD_LD5__IPU_DISPB_DAT_5,
- MX35_PAD_LD6__IPU_DISPB_DAT_6,
- MX35_PAD_LD7__IPU_DISPB_DAT_7,
- MX35_PAD_LD8__IPU_DISPB_DAT_8,
- MX35_PAD_LD9__IPU_DISPB_DAT_9,
- MX35_PAD_LD10__IPU_DISPB_DAT_10,
- MX35_PAD_LD11__IPU_DISPB_DAT_11,
- MX35_PAD_LD12__IPU_DISPB_DAT_12,
- MX35_PAD_LD13__IPU_DISPB_DAT_13,
- MX35_PAD_LD14__IPU_DISPB_DAT_14,
- MX35_PAD_LD15__IPU_DISPB_DAT_15,
- MX35_PAD_LD16__IPU_DISPB_DAT_16,
- MX35_PAD_LD17__IPU_DISPB_DAT_17,
- MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
- MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
- MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
- MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
- MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
- MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
- MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
- /* gpio */
- MX35_PAD_ATA_CS0__GPIO2_6,
- /* USB host */
- MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
- MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
- /* SSI */
- MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
- MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
- MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
- MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
- /* CAN2 */
- MX35_PAD_TX5_RX0__CAN2_TXCAN,
- MX35_PAD_TX4_RX1__CAN2_RXCAN,
- /* esdhc */
- MX35_PAD_SD1_CMD__ESDHC1_CMD,
- MX35_PAD_SD1_CLK__ESDHC1_CLK,
- MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
- MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
- MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
- MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
- MX35_PAD_ATA_DATA10__GPIO2_23, /* WriteProtect */
- MX35_PAD_ATA_DATA11__GPIO2_24, /* CardDetect */
-};
-
-#define AC97_GPIO_TXFS IMX_GPIO_NR(2, 31)
-#define AC97_GPIO_TXD IMX_GPIO_NR(2, 28)
-#define AC97_GPIO_RESET IMX_GPIO_NR(2, 0)
-
-static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
-{
- iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
- iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
- int ret;
-
- ret = gpio_request(AC97_GPIO_TXFS, "SSI");
- if (ret) {
- printk("failed to get GPIO_TXFS: %d\n", ret);
- return;
- }
-
- mxc_iomux_v3_setup_pad(txfs_gpio);
-
- /* warm reset */
- gpio_direction_output(AC97_GPIO_TXFS, 1);
- udelay(2);
- gpio_set_value(AC97_GPIO_TXFS, 0);
-
- gpio_free(AC97_GPIO_TXFS);
- mxc_iomux_v3_setup_pad(txfs);
-}
-
-static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97)
-{
- iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
- iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
- iomux_v3_cfg_t txd_gpio = MX35_PAD_STXD4__GPIO2_28;
- iomux_v3_cfg_t txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD;
- iomux_v3_cfg_t reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0;
- int ret;
-
- ret = gpio_request(AC97_GPIO_TXFS, "SSI");
- if (ret)
- goto err1;
-
- ret = gpio_request(AC97_GPIO_TXD, "SSI");
- if (ret)
- goto err2;
-
- ret = gpio_request(AC97_GPIO_RESET, "SSI");
- if (ret)
- goto err3;
-
- mxc_iomux_v3_setup_pad(txfs_gpio);
- mxc_iomux_v3_setup_pad(txd_gpio);
- mxc_iomux_v3_setup_pad(reset_gpio);
-
- gpio_direction_output(AC97_GPIO_TXFS, 0);
- gpio_direction_output(AC97_GPIO_TXD, 0);
-
- /* cold reset */
- gpio_direction_output(AC97_GPIO_RESET, 0);
- udelay(10);
- gpio_direction_output(AC97_GPIO_RESET, 1);
-
- mxc_iomux_v3_setup_pad(txd);
- mxc_iomux_v3_setup_pad(txfs);
-
- gpio_free(AC97_GPIO_RESET);
-err3:
- gpio_free(AC97_GPIO_TXD);
-err2:
- gpio_free(AC97_GPIO_TXFS);
-err1:
- if (ret)
- printk("%s failed with %d\n", __func__, ret);
- mdelay(1);
-}
-
-static const struct imx_ssi_platform_data pcm043_ssi_pdata __initconst = {
- .ac97_reset = pcm043_ac97_cold_reset,
- .ac97_warm_reset = pcm043_ac97_warm_reset,
- .flags = IMX_SSI_USE_AC97,
-};
-
-static const struct mxc_nand_platform_data
-pcm037_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-static int pcm043_otg_init(struct platform_device *pdev)
-{
- return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
- .init = pcm043_otg_init,
- .portsc = MXC_EHCI_MODE_UTMI,
-};
-
-static int pcm043_usbh1_init(struct platform_device *pdev)
-{
- return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
- MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
-}
-
-static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
- .init = pcm043_usbh1_init,
- .portsc = MXC_EHCI_MODE_SERIAL,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_UTMI,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init pcm043_otg_mode(char *options)
-{
- if (!strcmp(options, "host"))
- otg_mode_host = true;
- else if (!strcmp(options, "device"))
- otg_mode_host = false;
- else
- pr_info("otg_mode neither \"host\" nor \"device\". "
- "Defaulting to device\n");
- return 1;
-}
-__setup("otg_mode=", pcm043_otg_mode);
-
-static struct esdhc_platform_data sd1_pdata = {
- .wp_type = ESDHC_WP_GPIO,
- .cd_type = ESDHC_CD_GPIO,
-};
-
-static struct gpiod_lookup_table sd1_gpio_table = {
- .dev_id = "sdhci-esdhc-imx35.0",
- .table = {
- /* Card detect: bank 2 offset 24 */
- GPIO_LOOKUP("imx35-gpio.2", 24, "cd", GPIO_ACTIVE_LOW),
- /* Write protect: bank 2 offset 23 */
- GPIO_LOOKUP("imx35-gpio.2", 23, "wp", GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-/*
- * Board specific initialization.
- */
-static void __init pcm043_init(void)
-{
- imx35_soc_init();
-
- mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
-
- imx35_add_fec(NULL);
- platform_add_devices(devices, ARRAY_SIZE(devices));
- imx35_add_imx2_wdt();
-
- imx35_add_imx_uart0(&uart_pdata);
- imx35_add_mxc_nand(&pcm037_nand_board_info);
-
- imx35_add_imx_uart1(&uart_pdata);
-
- i2c_register_board_info(0, pcm043_i2c_devices,
- ARRAY_SIZE(pcm043_i2c_devices));
-
- imx35_add_imx_i2c0(&pcm043_i2c0_data);
-
- imx35_add_ipu_core();
- imx35_add_mx3_sdc_fb(&mx3fb_pdata);
-
- if (otg_mode_host) {
- otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT);
- if (otg_pdata.otg)
- imx35_add_mxc_ehci_otg(&otg_pdata);
- }
- imx35_add_mxc_ehci_hs(&usbh1_pdata);
-
- if (!otg_mode_host)
- imx35_add_fsl_usb2_udc(&otg_device_pdata);
-
- imx35_add_flexcan1();
-}
-
-static void __init pcm043_late_init(void)
-{
- imx35_add_imx_ssi(0, &pcm043_ssi_pdata);
-
- gpiod_add_lookup_table(&sd1_gpio_table);
- imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
-}
-
-static void __init pcm043_timer_init(void)
-{
- mx35_clocks_init();
-}
-
-MACHINE_START(PCM043, "Phytec Phycore pcm043")
- /* Maintainer: Pengutronix */
- .atag_offset = 0x100,
- .map_io = mx35_map_io,
- .init_early = imx35_init_early,
- .init_irq = mx35_init_irq,
- .init_time = pcm043_timer_init,
- .init_machine = pcm043_init,
- .init_late = pcm043_late_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
deleted file mode 100644
index 5b362da2dc09..000000000000
--- a/arch/arm/mach-imx/mach-qong.c
+++ /dev/null
@@ -1,262 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/memory.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/platnand.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-
-#include "common.h"
-#include "devices-imx31.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-
-/* FPGA defines */
-#define QONG_FPGA_VERSION(major, minor, rev) \
- (((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF))
-
-#define QONG_FPGA_BASEADDR MX31_CS1_BASE_ADDR
-#define QONG_FPGA_PERIPH_SIZE (1 << 24)
-
-#define QONG_FPGA_CTRL_BASEADDR QONG_FPGA_BASEADDR
-#define QONG_FPGA_CTRL_SIZE 0x10
-/* FPGA control registers */
-#define QONG_FPGA_CTRL_VERSION 0x00
-
-#define QONG_DNET_ID 1
-#define QONG_DNET_BASEADDR \
- (QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE)
-#define QONG_DNET_SIZE 0x00001000
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static int uart_pins[] = {
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1
-};
-
-static inline void __init mxc_init_imx_uart(void)
-{
- mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins),
- "uart-0");
- imx31_add_imx_uart0(&uart_pdata);
-}
-
-static struct resource dnet_resources[] = {
- {
- .name = "dnet-memory",
- .start = QONG_DNET_BASEADDR,
- .end = QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }, {
- /* irq number is run-time assigned */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device dnet_device = {
- .name = "dnet",
- .id = -1,
- .num_resources = ARRAY_SIZE(dnet_resources),
- .resource = dnet_resources,
-};
-
-static int __init qong_init_dnet(void)
-{
- int ret;
-
- dnet_resources[1].start =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1));
- dnet_resources[1].end =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1));
- ret = platform_device_register(&dnet_device);
- return ret;
-}
-
-/* MTD NOR flash */
-
-static struct physmap_flash_data qong_flash_data = {
- .width = 2,
-};
-
-static struct resource qong_flash_resource = {
- .start = MX31_CS0_BASE_ADDR,
- .end = MX31_CS0_BASE_ADDR + SZ_128M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device qong_nor_mtd_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &qong_flash_data,
- },
- .resource = &qong_flash_resource,
- .num_resources = 1,
-};
-
-static void qong_init_nor_mtd(void)
-{
- (void)platform_device_register(&qong_nor_mtd_device);
-}
-
-/*
- * Hardware specific access to control-lines
- */
-static void qong_nand_cmd_ctrl(struct nand_chip *nand_chip, int cmd,
- unsigned int ctrl)
-{
- if (cmd == NAND_CMD_NONE)
- return;
-
- if (ctrl & NAND_CLE)
- writeb(cmd, nand_chip->legacy.IO_ADDR_W + (1 << 24));
- else
- writeb(cmd, nand_chip->legacy.IO_ADDR_W + (1 << 23));
-}
-
-/*
- * Read the Device Ready pin.
- */
-static int qong_nand_device_ready(struct nand_chip *chip)
-{
- return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_NFRB));
-}
-
-static void qong_nand_select_chip(struct nand_chip *chip, int cs)
-{
- if (cs >= 0)
- gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
- else
- gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 1);
-}
-
-static struct platform_nand_data qong_nand_data = {
- .chip = {
- .nr_chips = 1,
- .chip_delay = 20,
- .options = 0,
- },
- .ctrl = {
- .cmd_ctrl = qong_nand_cmd_ctrl,
- .dev_ready = qong_nand_device_ready,
- .select_chip = qong_nand_select_chip,
- }
-};
-
-static struct resource qong_nand_resource = {
- .start = MX31_CS3_BASE_ADDR,
- .end = MX31_CS3_BASE_ADDR + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device qong_nand_device = {
- .name = "gen_nand",
- .id = -1,
- .dev = {
- .platform_data = &qong_nand_data,
- },
- .num_resources = 1,
- .resource = &qong_nand_resource,
-};
-
-static void __init qong_init_nand_mtd(void)
-{
- /* init CS */
- imx_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3)));
- imx_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3)));
- imx_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3)));
-
- mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
-
- /* enable pin */
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFCE_B, IOMUX_CONFIG_GPIO));
- if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), "nand_enable"))
- gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
-
- /* ready/busy pin */
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFRB, IOMUX_CONFIG_GPIO));
- if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFRB), "nand_rdy"))
- gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFRB));
-
- /* write protect pin */
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFWP_B, IOMUX_CONFIG_GPIO));
- if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFWP_B), "nand_wp"))
- gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFWP_B));
-
- platform_device_register(&qong_nand_device);
-}
-
-static void __init qong_init_fpga(void)
-{
- void __iomem *regs;
- u32 fpga_ver;
-
- regs = ioremap(QONG_FPGA_CTRL_BASEADDR, QONG_FPGA_CTRL_SIZE);
- if (!regs) {
- printk(KERN_ERR "%s: failed to map registers, aborting.\n",
- __func__);
- return;
- }
-
- fpga_ver = readl(regs + QONG_FPGA_CTRL_VERSION);
- iounmap(regs);
- printk(KERN_INFO "Qong FPGA version %d.%d.%d\n",
- (fpga_ver & 0xF000) >> 12,
- (fpga_ver & 0x0F00) >> 8, fpga_ver & 0x00FF);
- if (fpga_ver < QONG_FPGA_VERSION(0, 8, 7)) {
- printk(KERN_ERR "qong: Unexpected FPGA version, FPGA-based "
- "devices won't be registered!\n");
- return;
- }
-
- /* register FPGA-based devices */
- qong_init_nand_mtd();
- qong_init_dnet();
-}
-
-/*
- * Board specific initialization.
- */
-static void __init qong_init(void)
-{
- imx31_soc_init();
-
- mxc_init_imx_uart();
- qong_init_nor_mtd();
- imx31_add_imx2_wdt();
-}
-
-static void __init qong_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
- /* Maintainer: DENX Software Engineering GmbH */
- .atag_offset = 0x100,
- .map_io = mx31_map_io,
- .init_early = imx31_init_early,
- .init_irq = mx31_init_irq,
- .init_time = qong_timer_init,
- .init_machine = qong_init,
- .init_late = qong_init_fpga,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
deleted file mode 100644
index fae5a41b5f6c..000000000000
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ /dev/null
@@ -1,306 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix
- * Copyright 2010 Creative Product Design
- *
- * Derived from mx35 3stack.
- * Original author: Fabio Estevam <fabio.estevam@freescale.com>
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <linux/i2c.h>
-#include <linux/mfd/mc13xxx.h>
-
-#include "common.h"
-#include "devices-imx35.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx35.h"
-
-#define GPIO_LCDPWR IMX_GPIO_NR(1, 2)
-#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0)
-
-#define GPIO_BUTTON1 IMX_GPIO_NR(1, 4)
-#define GPIO_BUTTON2 IMX_GPIO_NR(1, 5)
-#define GPIO_BUTTON3 IMX_GPIO_NR(1, 7)
-#define GPIO_BUTTON4 IMX_GPIO_NR(1, 8)
-#define GPIO_BUTTON5 IMX_GPIO_NR(1, 9)
-#define GPIO_BUTTON6 IMX_GPIO_NR(1, 10)
-#define GPIO_BUTTON7 IMX_GPIO_NR(1, 11)
-#define GPIO_BUTTON8 IMX_GPIO_NR(1, 12)
-
-static const struct fb_videomode fb_modedb[] = {
- {
- /* 800x480 @ 60 Hz */
- .name = "PT0708048",
- .refresh = 60,
- .xres = 800,
- .yres = 480,
- .pixclock = KHZ2PICOS(33260),
- .left_margin = 50,
- .right_margin = 156,
- .upper_margin = 10,
- .lower_margin = 10,
- .hsync_len = 1, /* note: DE only display */
- .vsync_len = 1, /* note: DE only display */
- .sync = FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- }, {
- /* 800x480 @ 60 Hz */
- .name = "CTP-CLAA070LC0ACW",
- .refresh = 60,
- .xres = 800,
- .yres = 480,
- .pixclock = KHZ2PICOS(27000),
- .left_margin = 50,
- .right_margin = 50, /* whole line should have 900 clocks */
- .upper_margin = 10,
- .lower_margin = 10, /* whole frame should have 500 lines */
- .hsync_len = 1, /* note: DE only display */
- .vsync_len = 1, /* note: DE only display */
- .sync = FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- }
-};
-
-static struct mx3fb_platform_data mx3fb_pdata __initdata = {
- .name = "PT0708048",
- .mode = fb_modedb,
- .num_modes = ARRAY_SIZE(fb_modedb),
-};
-
-static struct physmap_flash_data vpr200_flash_data = {
- .width = 2,
-};
-
-static struct resource vpr200_flash_resource = {
- .start = MX35_CS0_BASE_ADDR,
- .end = MX35_CS0_BASE_ADDR + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device vpr200_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &vpr200_flash_data,
- },
- .resource = &vpr200_flash_resource,
- .num_resources = 1,
-};
-
-static const struct mxc_nand_platform_data
- vpr200_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
- .flash_bbt = 1,
-};
-
-#define VPR_KEY_DEBOUNCE 500
-static struct gpio_keys_button vpr200_gpio_keys_table[] = {
- {KEY_F2, GPIO_BUTTON1, 1, "vpr-keys: F2", 0, VPR_KEY_DEBOUNCE},
- {KEY_F3, GPIO_BUTTON2, 1, "vpr-keys: F3", 0, VPR_KEY_DEBOUNCE},
- {KEY_F4, GPIO_BUTTON3, 1, "vpr-keys: F4", 0, VPR_KEY_DEBOUNCE},
- {KEY_F5, GPIO_BUTTON4, 1, "vpr-keys: F5", 0, VPR_KEY_DEBOUNCE},
- {KEY_F6, GPIO_BUTTON5, 1, "vpr-keys: F6", 0, VPR_KEY_DEBOUNCE},
- {KEY_F7, GPIO_BUTTON6, 1, "vpr-keys: F7", 0, VPR_KEY_DEBOUNCE},
- {KEY_F8, GPIO_BUTTON7, 1, "vpr-keys: F8", 1, VPR_KEY_DEBOUNCE},
- {KEY_F9, GPIO_BUTTON8, 1, "vpr-keys: F9", 1, VPR_KEY_DEBOUNCE},
-};
-
-static const struct gpio_keys_platform_data
- vpr200_gpio_keys_data __initconst = {
- .buttons = vpr200_gpio_keys_table,
- .nbuttons = ARRAY_SIZE(vpr200_gpio_keys_table),
-};
-
-static struct mc13xxx_platform_data vpr200_pmic = {
- .flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN,
-};
-
-static const struct imxi2c_platform_data vpr200_i2c0_data __initconst = {
- .bitrate = 50000,
-};
-
-static struct i2c_board_info vpr200_i2c_devices[] = {
- {
- I2C_BOARD_INFO("24c02", 0x50), /* E0=0, E1=0, E2=0 */
- }, {
- I2C_BOARD_INFO("mc13892", 0x08),
- .platform_data = &vpr200_pmic,
- /* irq number is run-time assigned */
- }
-};
-
-static const iomux_v3_cfg_t vpr200_pads[] __initconst = {
- /* UART1 */
- MX35_PAD_TXD1__UART1_TXD_MUX,
- MX35_PAD_RXD1__UART1_RXD_MUX,
- /* UART3 */
- MX35_PAD_ATA_DATA10__UART3_RXD_MUX,
- MX35_PAD_ATA_DATA11__UART3_TXD_MUX,
- /* FEC */
- MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
- MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
- MX35_PAD_FEC_RX_DV__FEC_RX_DV,
- MX35_PAD_FEC_COL__FEC_COL,
- MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
- MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
- MX35_PAD_FEC_TX_EN__FEC_TX_EN,
- MX35_PAD_FEC_MDC__FEC_MDC,
- MX35_PAD_FEC_MDIO__FEC_MDIO,
- MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
- MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
- MX35_PAD_FEC_CRS__FEC_CRS,
- MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
- MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
- MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
- MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
- MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
- MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
- /* Display */
- MX35_PAD_LD0__IPU_DISPB_DAT_0,
- MX35_PAD_LD1__IPU_DISPB_DAT_1,
- MX35_PAD_LD2__IPU_DISPB_DAT_2,
- MX35_PAD_LD3__IPU_DISPB_DAT_3,
- MX35_PAD_LD4__IPU_DISPB_DAT_4,
- MX35_PAD_LD5__IPU_DISPB_DAT_5,
- MX35_PAD_LD6__IPU_DISPB_DAT_6,
- MX35_PAD_LD7__IPU_DISPB_DAT_7,
- MX35_PAD_LD8__IPU_DISPB_DAT_8,
- MX35_PAD_LD9__IPU_DISPB_DAT_9,
- MX35_PAD_LD10__IPU_DISPB_DAT_10,
- MX35_PAD_LD11__IPU_DISPB_DAT_11,
- MX35_PAD_LD12__IPU_DISPB_DAT_12,
- MX35_PAD_LD13__IPU_DISPB_DAT_13,
- MX35_PAD_LD14__IPU_DISPB_DAT_14,
- MX35_PAD_LD15__IPU_DISPB_DAT_15,
- MX35_PAD_LD16__IPU_DISPB_DAT_16,
- MX35_PAD_LD17__IPU_DISPB_DAT_17,
- MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
- MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
- MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
- /* LCD Enable */
- MX35_PAD_D3_VSYNC__GPIO1_2,
- /* USBOTG */
- MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
- MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
- /* SDCARD */
- MX35_PAD_SD1_CMD__ESDHC1_CMD,
- MX35_PAD_SD1_CLK__ESDHC1_CLK,
- MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
- MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
- MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
- MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
- /* PMIC */
- MX35_PAD_GPIO2_0__GPIO2_0,
- /* GPIO keys */
- MX35_PAD_SCKR__GPIO1_4,
- MX35_PAD_COMPARE__GPIO1_5,
- MX35_PAD_SCKT__GPIO1_7,
- MX35_PAD_FST__GPIO1_8,
- MX35_PAD_HCKT__GPIO1_9,
- MX35_PAD_TX5_RX0__GPIO1_10,
- MX35_PAD_TX4_RX1__GPIO1_11,
- MX35_PAD_TX3_RX2__GPIO1_12,
-};
-
-/* USB Device config */
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_UTMI,
- .workaround = FLS_USB2_WORKAROUND_ENGCM09152,
-};
-
-static int vpr200_usbh_init(struct platform_device *pdev)
-{
- return mx35_initialize_usb_hw(pdev->id,
- MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY);
-}
-
-/* USB HOST config */
-static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
- .init = vpr200_usbh_init,
- .portsc = MXC_EHCI_MODE_SERIAL,
-};
-
-static struct platform_device *devices[] __initdata = {
- &vpr200_flash,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init vpr200_board_init(void)
-{
- imx35_soc_init();
-
- mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads));
-
- imx35_add_fec(NULL);
- imx35_add_imx2_wdt();
-
- imx35_add_imx_uart0(NULL);
- imx35_add_imx_uart2(NULL);
-
- imx35_add_ipu_core();
- imx35_add_mx3_sdc_fb(&mx3fb_pdata);
-
- imx35_add_fsl_usb2_udc(&otg_device_pdata);
- imx35_add_mxc_ehci_hs(&usb_host_pdata);
-
- imx35_add_mxc_nand(&vpr200_nand_board_info);
- imx35_add_sdhci_esdhc_imx(0, NULL);
-}
-
-static void __init vpr200_late_init(void)
-{
- imx_add_gpio_keys(&vpr200_gpio_keys_data);
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- if (0 != gpio_request(GPIO_LCDPWR, "LCDPWR"))
- printk(KERN_WARNING "vpr200: Couldn't get LCDPWR gpio\n");
- else
- gpio_direction_output(GPIO_LCDPWR, 0);
-
- if (0 != gpio_request(GPIO_PMIC_INT, "PMIC_INT"))
- printk(KERN_WARNING "vpr200: Couldn't get PMIC_INT gpio\n");
- else
- gpio_direction_input(GPIO_PMIC_INT);
-
- vpr200_i2c_devices[1].irq = gpio_to_irq(GPIO_PMIC_INT);
- i2c_register_board_info(0, vpr200_i2c_devices,
- ARRAY_SIZE(vpr200_i2c_devices));
-
- imx35_add_imx_i2c0(&vpr200_i2c0_data);
-}
-
-static void __init vpr200_timer_init(void)
-{
- mx35_clocks_init();
-}
-
-MACHINE_START(VPR200, "VPR200")
- /* Maintainer: Creative Product Design */
- .map_io = mx35_map_io,
- .init_early = imx35_init_early,
- .init_irq = mx35_init_irq,
- .init_time = vpr200_timer_init,
- .init_machine = vpr200_board_init,
- .init_late = vpr200_late_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c
deleted file mode 100644
index b834026e4615..000000000000
--- a/arch/arm/mach-imx/mm-imx21.c
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-imx/mm-imx21.c
- *
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/pinctrl/machine.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices/devices-common.h"
-#include "hardware.h"
-#include "iomux-v1.h"
-
-/* MX21 memory map definition */
-static struct map_desc imx21_io_desc[] __initdata = {
- /*
- * this fixed mapping covers:
- * - AIPI1
- * - AIPI2
- * - AITC
- * - ROM Patch
- * - and some reserved space
- */
- imx_map_entry(MX21, AIPI, MT_DEVICE),
- /*
- * this fixed mapping covers:
- * - CSI
- * - ATA
- */
- imx_map_entry(MX21, SAHB1, MT_DEVICE),
- /*
- * this fixed mapping covers:
- * - EMI
- */
- imx_map_entry(MX21, X_MEMC, MT_DEVICE),
-};
-
-/*
- * Initialize the memory map. It is called during the
- * system startup to create static physical to virtual
- * memory map for the IO modules.
- */
-void __init mx21_map_io(void)
-{
- iotable_init(imx21_io_desc, ARRAY_SIZE(imx21_io_desc));
-}
-
-void __init imx21_init_early(void)
-{
- mxc_set_cpu_type(MXC_CPU_MX21);
- imx_iomuxv1_init(MX21_IO_ADDRESS(MX21_GPIO_BASE_ADDR),
- MX21_NUM_GPIO_PORT);
-}
-
-void __init mx21_init_irq(void)
-{
- mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR));
-}
-
-static const struct resource imx21_audmux_res[] __initconst = {
- DEFINE_RES_MEM(MX21_AUDMUX_BASE_ADDR, SZ_4K),
-};
-
-void __init imx21_soc_init(void)
-{
- mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR));
- mxc_device_init();
-
- mxc_register_gpio("imx21-gpio", 0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
- mxc_register_gpio("imx21-gpio", 1, MX21_GPIO2_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
- mxc_register_gpio("imx21-gpio", 2, MX21_GPIO3_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
- mxc_register_gpio("imx21-gpio", 3, MX21_GPIO4_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
- mxc_register_gpio("imx21-gpio", 4, MX21_GPIO5_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
- mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
-
- pinctrl_provide_dummies();
- imx_add_imx_dma("imx21-dma", MX21_DMA_BASE_ADDR, MX21_INT_DMACH0);
- platform_device_register_simple("imx21-audmux", 0, imx21_audmux_res,
- ARRAY_SIZE(imx21_audmux_res));
-}
diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
deleted file mode 100644
index 2717614f101d..000000000000
--- a/arch/arm/mach-imx/mm-imx27.c
+++ /dev/null
@@ -1,88 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-imx/mm-imx27.c
- *
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/pinctrl/machine.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices/devices-common.h"
-#include "hardware.h"
-#include "iomux-v1.h"
-
-/* MX27 memory map definition */
-static struct map_desc imx27_io_desc[] __initdata = {
- /*
- * this fixed mapping covers:
- * - AIPI1
- * - AIPI2
- * - AITC
- * - ROM Patch
- * - and some reserved space
- */
- imx_map_entry(MX27, AIPI, MT_DEVICE),
- /*
- * this fixed mapping covers:
- * - CSI
- * - ATA
- */
- imx_map_entry(MX27, SAHB1, MT_DEVICE),
- /*
- * this fixed mapping covers:
- * - EMI
- */
- imx_map_entry(MX27, X_MEMC, MT_DEVICE),
-};
-
-/*
- * Initialize the memory map. It is called during the
- * system startup to create static physical to virtual
- * memory map for the IO modules.
- */
-void __init mx27_map_io(void)
-{
- iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc));
-}
-
-void __init imx27_init_early(void)
-{
- mxc_set_cpu_type(MXC_CPU_MX27);
- imx_iomuxv1_init(MX27_IO_ADDRESS(MX27_GPIO_BASE_ADDR),
- MX27_NUM_GPIO_PORT);
-}
-
-void __init mx27_init_irq(void)
-{
- mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
-}
-
-static const struct resource imx27_audmux_res[] __initconst = {
- DEFINE_RES_MEM(MX27_AUDMUX_BASE_ADDR, SZ_4K),
-};
-
-void __init imx27_soc_init(void)
-{
- mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR));
- mxc_device_init();
-
- /* i.mx27 has the i.mx21 type gpio */
- mxc_register_gpio("imx21-gpio", 0, MX27_GPIO1_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
- mxc_register_gpio("imx21-gpio", 1, MX27_GPIO2_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
- mxc_register_gpio("imx21-gpio", 2, MX27_GPIO3_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
- mxc_register_gpio("imx21-gpio", 3, MX27_GPIO4_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
- mxc_register_gpio("imx21-gpio", 4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
- mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
-
- pinctrl_provide_dummies();
- imx_add_imx_dma("imx27-dma", MX27_DMA_BASE_ADDR, MX27_INT_DMACH0);
- /* imx27 has the imx21 type audmux */
- platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res,
- ARRAY_SIZE(imx27_audmux_res));
-
- imx27_pm_init();
-}
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index ea2d58a63903..5056438e5b42 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -11,6 +11,7 @@
#include <linux/init.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/of_address.h>
#include <linux/pinctrl/machine.h>
#include <asm/system_misc.h>
@@ -19,9 +20,7 @@
#include "common.h"
#include "crmregs-imx3.h"
-#include "devices/devices-common.h"
#include "hardware.h"
-#include "iomux-v3.h"
void __iomem *mx3_ccm_base;
@@ -71,40 +70,6 @@ static void __iomem *imx3_ioremap_caller(phys_addr_t phys_addr, size_t size,
return __arm_ioremap_caller(phys_addr, size, mtype, caller);
}
-static void __init imx3_init_l2x0(void)
-{
-#ifdef CONFIG_CACHE_L2X0
- void __iomem *l2x0_base;
- void __iomem *clkctl_base;
-
-/*
- * First of all, we must repair broken chip settings. There are some
- * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
- * misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
- * Workaraound is to setup the correct register setting prior enabling the
- * L2 cache. This should not hurt already working CPUs, as they are using the
- * same value.
- */
-#define L2_MEM_VAL 0x10
-
- clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
- if (clkctl_base != NULL) {
- writel(0x00000515, clkctl_base + L2_MEM_VAL);
- iounmap(clkctl_base);
- } else {
- pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
- }
-
- l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
- if (!l2x0_base) {
- printk(KERN_ERR "remapping L2 cache area failed\n");
- return;
- }
-
- l2x0_init(l2x0_base, 0x00030024, 0x00000000);
-#endif
-}
-
#ifdef CONFIG_SOC_IMX31
static struct map_desc mx31_io_desc[] __initdata = {
imx_map_entry(MX31, X_MEMC, MT_DEVICE),
@@ -135,70 +100,26 @@ static void imx31_idle(void)
void __init imx31_init_early(void)
{
+ struct device_node *np;
+
mxc_set_cpu_type(MXC_CPU_MX31);
arch_ioremap_caller = imx3_ioremap_caller;
arm_pm_idle = imx31_idle;
- mx3_ccm_base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR);
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx31-ccm");
+ mx3_ccm_base = of_iomap(np, 0);
+ BUG_ON(!mx3_ccm_base);
}
void __init mx31_init_irq(void)
{
- mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
-}
-
-static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
- .per_2_per_addr = 1677,
-};
-
-static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = {
- .ap_2_ap_addr = 423,
- .ap_2_bp_addr = 829,
- .bp_2_ap_addr = 1029,
-};
-
-static struct sdma_platform_data imx31_sdma_pdata __initdata = {
- .fw_name = "sdma-imx31-to2.bin",
- .script_addrs = &imx31_to2_sdma_script,
-};
-
-static const struct resource imx31_audmux_res[] __initconst = {
- DEFINE_RES_MEM(MX31_AUDMUX_BASE_ADDR, SZ_16K),
-};
-
-static const struct resource imx31_rnga_res[] __initconst = {
- DEFINE_RES_MEM(MX31_RNGA_BASE_ADDR, SZ_16K),
-};
-
-void __init imx31_soc_init(void)
-{
- int to_version = mx31_revision() >> 4;
+ void __iomem *avic_base;
+ struct device_node *np;
- imx3_init_l2x0();
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx31-avic");
+ avic_base = of_iomap(np, 0);
+ BUG_ON(!avic_base);
- mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
- mxc_device_init();
-
- mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
- mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
- mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
-
- pinctrl_provide_dummies();
-
- if (to_version == 1) {
- strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
- strlen(imx31_sdma_pdata.fw_name));
- imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script;
- }
-
- imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
-
- imx_set_aips(MX31_IO_ADDRESS(MX31_AIPS1_BASE_ADDR));
- imx_set_aips(MX31_IO_ADDRESS(MX31_AIPS2_BASE_ADDR));
-
- platform_device_register_simple("imx31-audmux", 0, imx31_audmux_res,
- ARRAY_SIZE(imx31_audmux_res));
- platform_device_register_simple("mxc_rnga", -1, imx31_rnga_res,
- ARRAY_SIZE(imx31_rnga_res));
+ mxc_init_irq(avic_base);
}
#endif /* ifdef CONFIG_SOC_IMX31 */
@@ -228,85 +149,25 @@ static void imx35_idle(void)
void __init imx35_init_early(void)
{
+ struct device_node *np;
+
mxc_set_cpu_type(MXC_CPU_MX35);
- mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
arm_pm_idle = imx35_idle;
arch_ioremap_caller = imx3_ioremap_caller;
- mx3_ccm_base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR);
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx35-ccm");
+ mx3_ccm_base = of_iomap(np, 0);
+ BUG_ON(!mx3_ccm_base);
}
void __init mx35_init_irq(void)
{
- mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
-}
-
-static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
- .ap_2_ap_addr = 642,
- .uart_2_mcu_addr = 817,
- .mcu_2_app_addr = 747,
- .uartsh_2_mcu_addr = 1183,
- .per_2_shp_addr = 1033,
- .mcu_2_shp_addr = 961,
- .ata_2_mcu_addr = 1333,
- .mcu_2_ata_addr = 1252,
- .app_2_mcu_addr = 683,
- .shp_2_per_addr = 1111,
- .shp_2_mcu_addr = 892,
-};
-
-static struct sdma_script_start_addrs imx35_to2_sdma_script __initdata = {
- .ap_2_ap_addr = 729,
- .uart_2_mcu_addr = 904,
- .per_2_app_addr = 1597,
- .mcu_2_app_addr = 834,
- .uartsh_2_mcu_addr = 1270,
- .per_2_shp_addr = 1120,
- .mcu_2_shp_addr = 1048,
- .ata_2_mcu_addr = 1429,
- .mcu_2_ata_addr = 1339,
- .app_2_per_addr = 1531,
- .app_2_mcu_addr = 770,
- .shp_2_per_addr = 1198,
- .shp_2_mcu_addr = 979,
-};
-
-static struct sdma_platform_data imx35_sdma_pdata __initdata = {
- .fw_name = "sdma-imx35-to2.bin",
- .script_addrs = &imx35_to2_sdma_script,
-};
-
-static const struct resource imx35_audmux_res[] __initconst = {
- DEFINE_RES_MEM(MX35_AUDMUX_BASE_ADDR, SZ_16K),
-};
-
-void __init imx35_soc_init(void)
-{
- int to_version = mx35_revision() >> 4;
-
- imx3_init_l2x0();
-
- mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
- mxc_device_init();
-
- mxc_register_gpio("imx35-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
- mxc_register_gpio("imx35-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
- mxc_register_gpio("imx35-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
-
- pinctrl_provide_dummies();
- if (to_version == 1) {
- strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin",
- strlen(imx35_sdma_pdata.fw_name));
- imx35_sdma_pdata.script_addrs = &imx35_to1_sdma_script;
- }
-
- imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
+ void __iomem *avic_base;
+ struct device_node *np;
- /* Setup AIPS registers */
- imx_set_aips(MX35_IO_ADDRESS(MX35_AIPS1_BASE_ADDR));
- imx_set_aips(MX35_IO_ADDRESS(MX35_AIPS2_BASE_ADDR));
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx35-avic");
+ avic_base = of_iomap(np, 0);
+ BUG_ON(!avic_base);
- /* i.mx35 has the i.mx31 type audmux */
- platform_device_register_simple("imx31-audmux", 0, imx35_audmux_res,
- ARRAY_SIZE(imx35_audmux_res));
+ mxc_init_irq(avic_base);
}
#endif /* ifdef CONFIG_SOC_IMX35 */
diff --git a/arch/arm/mach-imx/mx21.h b/arch/arm/mach-imx/mx21.h
deleted file mode 100644
index 38be12a44bdd..000000000000
--- a/arch/arm/mach-imx/mx21.h
+++ /dev/null
@@ -1,176 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- * Copyright 2009 Holger Schurig, hs4233@mail.mn-solutions.de
- *
- * This contains i.MX21-specific hardware definitions. For those
- * hardware pieces that are common between i.MX21 and i.MX27, have a
- * look at mx2x.h.
- */
-
-#ifndef __MACH_MX21_H__
-#define __MACH_MX21_H__
-
-#define MX21_AIPI_BASE_ADDR 0x10000000
-#define MX21_AIPI_SIZE SZ_1M
-#define MX21_DMA_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x01000)
-#define MX21_WDOG_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x02000)
-#define MX21_GPT1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x03000)
-#define MX21_GPT2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x04000)
-#define MX21_GPT3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x05000)
-#define MX21_PWM_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x06000)
-#define MX21_RTC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x07000)
-#define MX21_KPP_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x08000)
-#define MX21_OWIRE_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x09000)
-#define MX21_UART1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0a000)
-#define MX21_UART2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0b000)
-#define MX21_UART3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0c000)
-#define MX21_UART4_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0d000)
-#define MX21_CSPI1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0e000)
-#define MX21_CSPI2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0f000)
-#define MX21_SSI1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x10000)
-#define MX21_SSI2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x11000)
-#define MX21_I2C_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x12000)
-#define MX21_SDHC1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x13000)
-#define MX21_SDHC2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x14000)
-#define MX21_GPIO_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x15000)
-#define MX21_GPIO1_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x000)
-#define MX21_GPIO2_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x100)
-#define MX21_GPIO3_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x200)
-#define MX21_GPIO4_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x300)
-#define MX21_GPIO5_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x400)
-#define MX21_GPIO6_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x500)
-#define MX21_AUDMUX_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x16000)
-#define MX21_CSPI3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x17000)
-#define MX21_LCDC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x21000)
-#define MX21_SLCDC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x22000)
-#define MX21_USBOTG_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x24000)
-#define MX21_EMMA_PP_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x26000)
-#define MX21_EMMA_PRP_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x26400)
-#define MX21_CCM_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x27000)
-#define MX21_SYSCTRL_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x27800)
-#define MX21_JAM_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x3e000)
-#define MX21_MAX_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x3f000)
-
-#define MX21_AVIC_BASE_ADDR 0x10040000
-
-#define MX21_SAHB1_BASE_ADDR 0x80000000
-#define MX21_SAHB1_SIZE SZ_1M
-#define MX21_CSI_BASE_ADDR (MX2x_SAHB1_BASE_ADDR + 0x0000)
-
-/* Memory regions and CS */
-#define MX21_SDRAM_BASE_ADDR 0xc0000000
-#define MX21_CSD1_BASE_ADDR 0xc4000000
-
-#define MX21_CS0_BASE_ADDR 0xc8000000
-#define MX21_CS1_BASE_ADDR 0xcc000000
-#define MX21_CS2_BASE_ADDR 0xd0000000
-#define MX21_CS3_BASE_ADDR 0xd1000000
-#define MX21_CS4_BASE_ADDR 0xd2000000
-#define MX21_PCMCIA_MEM_BASE_ADDR 0xd4000000
-#define MX21_CS5_BASE_ADDR 0xdd000000
-
-/* NAND, SDRAM, WEIM etc controllers */
-#define MX21_X_MEMC_BASE_ADDR 0xdf000000
-#define MX21_X_MEMC_SIZE SZ_256K
-
-#define MX21_SDRAMC_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x0000)
-#define MX21_EIM_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x1000)
-#define MX21_PCMCIA_CTL_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x2000)
-#define MX21_NFC_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x3000)
-
-#define MX21_IRAM_BASE_ADDR 0xffffe800 /* internal ram */
-
-#define MX21_IO_P2V(x) IMX_IO_P2V(x)
-#define MX21_IO_ADDRESS(x) IOMEM(MX21_IO_P2V(x))
-
-/* fixed interrupt numbers */
-#include <asm/irq.h>
-#define MX21_INT_CSPI3 (NR_IRQS_LEGACY + 6)
-#define MX21_INT_GPIO (NR_IRQS_LEGACY + 8)
-#define MX21_INT_FIRI (NR_IRQS_LEGACY + 9)
-#define MX21_INT_SDHC2 (NR_IRQS_LEGACY + 10)
-#define MX21_INT_SDHC1 (NR_IRQS_LEGACY + 11)
-#define MX21_INT_I2C (NR_IRQS_LEGACY + 12)
-#define MX21_INT_SSI2 (NR_IRQS_LEGACY + 13)
-#define MX21_INT_SSI1 (NR_IRQS_LEGACY + 14)
-#define MX21_INT_CSPI2 (NR_IRQS_LEGACY + 15)
-#define MX21_INT_CSPI1 (NR_IRQS_LEGACY + 16)
-#define MX21_INT_UART4 (NR_IRQS_LEGACY + 17)
-#define MX21_INT_UART3 (NR_IRQS_LEGACY + 18)
-#define MX21_INT_UART2 (NR_IRQS_LEGACY + 19)
-#define MX21_INT_UART1 (NR_IRQS_LEGACY + 20)
-#define MX21_INT_KPP (NR_IRQS_LEGACY + 21)
-#define MX21_INT_RTC (NR_IRQS_LEGACY + 22)
-#define MX21_INT_PWM (NR_IRQS_LEGACY + 23)
-#define MX21_INT_GPT3 (NR_IRQS_LEGACY + 24)
-#define MX21_INT_GPT2 (NR_IRQS_LEGACY + 25)
-#define MX21_INT_GPT1 (NR_IRQS_LEGACY + 26)
-#define MX21_INT_WDOG (NR_IRQS_LEGACY + 27)
-#define MX21_INT_PCMCIA (NR_IRQS_LEGACY + 28)
-#define MX21_INT_NFC (NR_IRQS_LEGACY + 29)
-#define MX21_INT_BMI (NR_IRQS_LEGACY + 30)
-#define MX21_INT_CSI (NR_IRQS_LEGACY + 31)
-#define MX21_INT_DMACH0 (NR_IRQS_LEGACY + 32)
-#define MX21_INT_DMACH1 (NR_IRQS_LEGACY + 33)
-#define MX21_INT_DMACH2 (NR_IRQS_LEGACY + 34)
-#define MX21_INT_DMACH3 (NR_IRQS_LEGACY + 35)
-#define MX21_INT_DMACH4 (NR_IRQS_LEGACY + 36)
-#define MX21_INT_DMACH5 (NR_IRQS_LEGACY + 37)
-#define MX21_INT_DMACH6 (NR_IRQS_LEGACY + 38)
-#define MX21_INT_DMACH7 (NR_IRQS_LEGACY + 39)
-#define MX21_INT_DMACH8 (NR_IRQS_LEGACY + 40)
-#define MX21_INT_DMACH9 (NR_IRQS_LEGACY + 41)
-#define MX21_INT_DMACH10 (NR_IRQS_LEGACY + 42)
-#define MX21_INT_DMACH11 (NR_IRQS_LEGACY + 43)
-#define MX21_INT_DMACH12 (NR_IRQS_LEGACY + 44)
-#define MX21_INT_DMACH13 (NR_IRQS_LEGACY + 45)
-#define MX21_INT_DMACH14 (NR_IRQS_LEGACY + 46)
-#define MX21_INT_DMACH15 (NR_IRQS_LEGACY + 47)
-#define MX21_INT_EMMAENC (NR_IRQS_LEGACY + 49)
-#define MX21_INT_EMMADEC (NR_IRQS_LEGACY + 50)
-#define MX21_INT_EMMAPRP (NR_IRQS_LEGACY + 51)
-#define MX21_INT_EMMAPP (NR_IRQS_LEGACY + 52)
-#define MX21_INT_USBWKUP (NR_IRQS_LEGACY + 53)
-#define MX21_INT_USBDMA (NR_IRQS_LEGACY + 54)
-#define MX21_INT_USBHOST (NR_IRQS_LEGACY + 55)
-#define MX21_INT_USBFUNC (NR_IRQS_LEGACY + 56)
-#define MX21_INT_USBMNP (NR_IRQS_LEGACY + 57)
-#define MX21_INT_USBCTRL (NR_IRQS_LEGACY + 58)
-#define MX21_INT_SLCDC (NR_IRQS_LEGACY + 60)
-#define MX21_INT_LCDC (NR_IRQS_LEGACY + 61)
-
-/* fixed DMA request numbers */
-#define MX21_DMA_REQ_CSPI3_RX 1
-#define MX21_DMA_REQ_CSPI3_TX 2
-#define MX21_DMA_REQ_EXT 3
-#define MX21_DMA_REQ_FIRI_RX 4
-#define MX21_DMA_REQ_SDHC2 6
-#define MX21_DMA_REQ_SDHC1 7
-#define MX21_DMA_REQ_SSI2_RX0 8
-#define MX21_DMA_REQ_SSI2_TX0 9
-#define MX21_DMA_REQ_SSI2_RX1 10
-#define MX21_DMA_REQ_SSI2_TX1 11
-#define MX21_DMA_REQ_SSI1_RX0 12
-#define MX21_DMA_REQ_SSI1_TX0 13
-#define MX21_DMA_REQ_SSI1_RX1 14
-#define MX21_DMA_REQ_SSI1_TX1 15
-#define MX21_DMA_REQ_CSPI2_RX 16
-#define MX21_DMA_REQ_CSPI2_TX 17
-#define MX21_DMA_REQ_CSPI1_RX 18
-#define MX21_DMA_REQ_CSPI1_TX 19
-#define MX21_DMA_REQ_UART4_RX 20
-#define MX21_DMA_REQ_UART4_TX 21
-#define MX21_DMA_REQ_UART3_RX 22
-#define MX21_DMA_REQ_UART3_TX 23
-#define MX21_DMA_REQ_UART2_RX 24
-#define MX21_DMA_REQ_UART2_TX 25
-#define MX21_DMA_REQ_UART1_RX 26
-#define MX21_DMA_REQ_UART1_TX 27
-#define MX21_DMA_REQ_BMI_TX 28
-#define MX21_DMA_REQ_BMI_RX 29
-#define MX21_DMA_REQ_CSI_STAT 30
-#define MX21_DMA_REQ_CSI_RX 31
-
-#endif /* ifndef __MACH_MX21_H__ */
diff --git a/arch/arm/mach-imx/mx27.h b/arch/arm/mach-imx/mx27.h
index c6f7aae02b67..241c04d706fe 100644
--- a/arch/arm/mach-imx/mx27.h
+++ b/arch/arm/mach-imx/mx27.h
@@ -13,209 +13,13 @@
#define MX27_AIPI_BASE_ADDR 0x10000000
#define MX27_AIPI_SIZE SZ_1M
-#define MX27_DMA_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x01000)
-#define MX27_WDOG_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x02000)
-#define MX27_GPT1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x03000)
-#define MX27_GPT2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x04000)
-#define MX27_GPT3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x05000)
-#define MX27_PWM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x06000)
-#define MX27_RTC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x07000)
-#define MX27_KPP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x08000)
-#define MX27_OWIRE_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x09000)
-#define MX27_UART1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0a000)
-#define MX27_UART2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0b000)
-#define MX27_UART3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0c000)
-#define MX27_UART4_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0d000)
-#define MX27_CSPI1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0e000)
-#define MX27_CSPI2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0f000)
-#define MX27_SSI1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x10000)
-#define MX27_SSI2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x11000)
-#define MX27_I2C1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x12000)
-#define MX27_SDHC1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x13000)
-#define MX27_SDHC2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x14000)
-#define MX27_GPIO_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x15000)
-#define MX27_GPIO1_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x000)
-#define MX27_GPIO2_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x100)
-#define MX27_GPIO3_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x200)
-#define MX27_GPIO4_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x300)
-#define MX27_GPIO5_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x400)
-#define MX27_GPIO6_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x500)
-#define MX27_AUDMUX_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x16000)
-#define MX27_CSPI3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x17000)
-#define MX27_MSHC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x18000)
-#define MX27_GPT4_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x19000)
-#define MX27_GPT5_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1a000)
-#define MX27_UART5_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1b000)
-#define MX27_UART6_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1c000)
-#define MX27_I2C2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1d000)
-#define MX27_SDHC3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1e000)
-#define MX27_GPT6_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1f000)
-#define MX27_LCDC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x21000)
-#define MX27_SLCDC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x22000)
-#define MX27_VPU_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x23000)
-#define MX27_USB_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x24000)
-#define MX27_USB_OTG_BASE_ADDR (MX27_USB_BASE_ADDR + 0x0000)
-#define MX27_USB_HS1_BASE_ADDR (MX27_USB_BASE_ADDR + 0x0200)
-#define MX27_USB_HS2_BASE_ADDR (MX27_USB_BASE_ADDR + 0x0400)
-#define MX27_SAHARA_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x25000)
-#define MX27_EMMAPP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x26000)
-#define MX27_EMMAPRP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x26400)
-#define MX27_CCM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x27000)
-#define MX27_SYSCTRL_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x27800)
-#define MX27_IIM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x28000)
-#define MX27_RTIC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x2a000)
-#define MX27_FEC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x2b000)
-#define MX27_SCC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x2c000)
-#define MX27_ETB_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3b000)
-#define MX27_ETB_RAM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3c000)
-#define MX27_JAM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3e000)
-#define MX27_MAX_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3f000)
-
-#define MX27_AVIC_BASE_ADDR 0x10040000
-
-/* ROM patch */
-#define MX27_ROMP_BASE_ADDR 0x10041000
#define MX27_SAHB1_BASE_ADDR 0x80000000
#define MX27_SAHB1_SIZE SZ_1M
-#define MX27_CSI_BASE_ADDR (MX27_SAHB1_BASE_ADDR + 0x0000)
-#define MX27_ATA_BASE_ADDR (MX27_SAHB1_BASE_ADDR + 0x1000)
-
-/* Memory regions and CS */
-#define MX27_SDRAM_BASE_ADDR 0xa0000000
-#define MX27_CSD1_BASE_ADDR 0xb0000000
-#define MX27_CS0_BASE_ADDR 0xc0000000
-#define MX27_CS1_BASE_ADDR 0xc8000000
-#define MX27_CS2_BASE_ADDR 0xd0000000
-#define MX27_CS3_BASE_ADDR 0xd2000000
-#define MX27_CS4_BASE_ADDR 0xd4000000
-#define MX27_CS5_BASE_ADDR 0xd6000000
-
-/* NAND, SDRAM, WEIM, M3IF, EMI controllers */
#define MX27_X_MEMC_BASE_ADDR 0xd8000000
#define MX27_X_MEMC_SIZE SZ_1M
-#define MX27_NFC_BASE_ADDR (MX27_X_MEMC_BASE_ADDR)
-#define MX27_SDRAMC_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x1000)
-#define MX27_WEIM_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x2000)
-#define MX27_M3IF_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x3000)
-#define MX27_PCMCIA_CTL_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x4000)
-
-#define MX27_WEIM_CSCRx_BASE_ADDR(cs) (MX27_WEIM_BASE_ADDR + (cs) * 0x10)
-#define MX27_WEIM_CSCRxU(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs))
-#define MX27_WEIM_CSCRxL(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x4)
-#define MX27_WEIM_CSCRxA(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x8)
-
-#define MX27_PCMCIA_MEM_BASE_ADDR 0xdc000000
-
-/* IRAM */
-#define MX27_IRAM_BASE_ADDR 0xffff4c00 /* internal ram */
#define MX27_IO_P2V(x) IMX_IO_P2V(x)
-#define MX27_IO_ADDRESS(x) IOMEM(MX27_IO_P2V(x))
-
-/* fixed interrupt numbers */
-#include <asm/irq.h>
-#define MX27_INT_I2C2 (NR_IRQS_LEGACY + 1)
-#define MX27_INT_GPT6 (NR_IRQS_LEGACY + 2)
-#define MX27_INT_GPT5 (NR_IRQS_LEGACY + 3)
-#define MX27_INT_GPT4 (NR_IRQS_LEGACY + 4)
-#define MX27_INT_RTIC (NR_IRQS_LEGACY + 5)
-#define MX27_INT_CSPI3 (NR_IRQS_LEGACY + 6)
-#define MX27_INT_MSHC (NR_IRQS_LEGACY + 7)
-#define MX27_INT_GPIO (NR_IRQS_LEGACY + 8)
-#define MX27_INT_SDHC3 (NR_IRQS_LEGACY + 9)
-#define MX27_INT_SDHC2 (NR_IRQS_LEGACY + 10)
-#define MX27_INT_SDHC1 (NR_IRQS_LEGACY + 11)
-#define MX27_INT_I2C1 (NR_IRQS_LEGACY + 12)
-#define MX27_INT_SSI2 (NR_IRQS_LEGACY + 13)
-#define MX27_INT_SSI1 (NR_IRQS_LEGACY + 14)
-#define MX27_INT_CSPI2 (NR_IRQS_LEGACY + 15)
-#define MX27_INT_CSPI1 (NR_IRQS_LEGACY + 16)
-#define MX27_INT_UART4 (NR_IRQS_LEGACY + 17)
-#define MX27_INT_UART3 (NR_IRQS_LEGACY + 18)
-#define MX27_INT_UART2 (NR_IRQS_LEGACY + 19)
-#define MX27_INT_UART1 (NR_IRQS_LEGACY + 20)
-#define MX27_INT_KPP (NR_IRQS_LEGACY + 21)
-#define MX27_INT_RTC (NR_IRQS_LEGACY + 22)
-#define MX27_INT_PWM (NR_IRQS_LEGACY + 23)
-#define MX27_INT_GPT3 (NR_IRQS_LEGACY + 24)
-#define MX27_INT_GPT2 (NR_IRQS_LEGACY + 25)
-#define MX27_INT_GPT1 (NR_IRQS_LEGACY + 26)
-#define MX27_INT_WDOG (NR_IRQS_LEGACY + 27)
-#define MX27_INT_PCMCIA (NR_IRQS_LEGACY + 28)
-#define MX27_INT_NFC (NR_IRQS_LEGACY + 29)
-#define MX27_INT_ATA (NR_IRQS_LEGACY + 30)
-#define MX27_INT_CSI (NR_IRQS_LEGACY + 31)
-#define MX27_INT_DMACH0 (NR_IRQS_LEGACY + 32)
-#define MX27_INT_DMACH1 (NR_IRQS_LEGACY + 33)
-#define MX27_INT_DMACH2 (NR_IRQS_LEGACY + 34)
-#define MX27_INT_DMACH3 (NR_IRQS_LEGACY + 35)
-#define MX27_INT_DMACH4 (NR_IRQS_LEGACY + 36)
-#define MX27_INT_DMACH5 (NR_IRQS_LEGACY + 37)
-#define MX27_INT_DMACH6 (NR_IRQS_LEGACY + 38)
-#define MX27_INT_DMACH7 (NR_IRQS_LEGACY + 39)
-#define MX27_INT_DMACH8 (NR_IRQS_LEGACY + 40)
-#define MX27_INT_DMACH9 (NR_IRQS_LEGACY + 41)
-#define MX27_INT_DMACH10 (NR_IRQS_LEGACY + 42)
-#define MX27_INT_DMACH11 (NR_IRQS_LEGACY + 43)
-#define MX27_INT_DMACH12 (NR_IRQS_LEGACY + 44)
-#define MX27_INT_DMACH13 (NR_IRQS_LEGACY + 45)
-#define MX27_INT_DMACH14 (NR_IRQS_LEGACY + 46)
-#define MX27_INT_DMACH15 (NR_IRQS_LEGACY + 47)
-#define MX27_INT_UART6 (NR_IRQS_LEGACY + 48)
-#define MX27_INT_UART5 (NR_IRQS_LEGACY + 49)
-#define MX27_INT_FEC (NR_IRQS_LEGACY + 50)
-#define MX27_INT_EMMAPRP (NR_IRQS_LEGACY + 51)
-#define MX27_INT_EMMAPP (NR_IRQS_LEGACY + 52)
-#define MX27_INT_VPU (NR_IRQS_LEGACY + 53)
-#define MX27_INT_USB_HS1 (NR_IRQS_LEGACY + 54)
-#define MX27_INT_USB_HS2 (NR_IRQS_LEGACY + 55)
-#define MX27_INT_USB_OTG (NR_IRQS_LEGACY + 56)
-#define MX27_INT_SCC_SMN (NR_IRQS_LEGACY + 57)
-#define MX27_INT_SCC_SCM (NR_IRQS_LEGACY + 58)
-#define MX27_INT_SAHARA (NR_IRQS_LEGACY + 59)
-#define MX27_INT_SLCDC (NR_IRQS_LEGACY + 60)
-#define MX27_INT_LCDC (NR_IRQS_LEGACY + 61)
-#define MX27_INT_IIM (NR_IRQS_LEGACY + 62)
-#define MX27_INT_CCM (NR_IRQS_LEGACY + 63)
-
-/* fixed DMA request numbers */
-#define MX27_DMA_REQ_CSPI3_RX 1
-#define MX27_DMA_REQ_CSPI3_TX 2
-#define MX27_DMA_REQ_EXT 3
-#define MX27_DMA_REQ_MSHC 4
-#define MX27_DMA_REQ_SDHC2 6
-#define MX27_DMA_REQ_SDHC1 7
-#define MX27_DMA_REQ_SSI2_RX0 8
-#define MX27_DMA_REQ_SSI2_TX0 9
-#define MX27_DMA_REQ_SSI2_RX1 10
-#define MX27_DMA_REQ_SSI2_TX1 11
-#define MX27_DMA_REQ_SSI1_RX0 12
-#define MX27_DMA_REQ_SSI1_TX0 13
-#define MX27_DMA_REQ_SSI1_RX1 14
-#define MX27_DMA_REQ_SSI1_TX1 15
-#define MX27_DMA_REQ_CSPI2_RX 16
-#define MX27_DMA_REQ_CSPI2_TX 17
-#define MX27_DMA_REQ_CSPI1_RX 18
-#define MX27_DMA_REQ_CSPI1_TX 19
-#define MX27_DMA_REQ_UART4_RX 20
-#define MX27_DMA_REQ_UART4_TX 21
-#define MX27_DMA_REQ_UART3_RX 22
-#define MX27_DMA_REQ_UART3_TX 23
-#define MX27_DMA_REQ_UART2_RX 24
-#define MX27_DMA_REQ_UART2_TX 25
-#define MX27_DMA_REQ_UART1_RX 26
-#define MX27_DMA_REQ_UART1_TX 27
-#define MX27_DMA_REQ_ATA_TX 28
-#define MX27_DMA_REQ_ATA_RCV 29
-#define MX27_DMA_REQ_CSI_STAT 30
-#define MX27_DMA_REQ_CSI_RX 31
-#define MX27_DMA_REQ_UART5_TX 32
-#define MX27_DMA_REQ_UART5_RX 33
-#define MX27_DMA_REQ_UART6_TX 34
-#define MX27_DMA_REQ_UART6_RX 35
-#define MX27_DMA_REQ_SDHC3 36
-#define MX27_DMA_REQ_NFC 37
#endif /* ifndef __MACH_MX27_H__ */
diff --git a/arch/arm/mach-imx/mx31.h b/arch/arm/mach-imx/mx31.h
index d9574671ca5c..08a72e25c289 100644
--- a/arch/arm/mach-imx/mx31.h
+++ b/arch/arm/mach-imx/mx31.h
@@ -2,196 +2,17 @@
#ifndef __MACH_MX31_H__
#define __MACH_MX31_H__
-/*
- * IRAM
- */
-#define MX31_IRAM_BASE_ADDR 0x1ffc0000 /* internal ram */
-#define MX31_IRAM_SIZE SZ_16K
-
-#define MX31_L2CC_BASE_ADDR 0x30000000
-#define MX31_L2CC_SIZE SZ_1M
-
#define MX31_AIPS1_BASE_ADDR 0x43f00000
#define MX31_AIPS1_SIZE SZ_1M
-#define MX31_MAX_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x04000)
-#define MX31_EVTMON_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x08000)
-#define MX31_CLKCTL_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x0c000)
-#define MX31_ETB_SLOT4_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x10000)
-#define MX31_ETB_SLOT5_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x14000)
-#define MX31_ECT_CTIO_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x18000)
-#define MX31_I2C1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x80000)
-#define MX31_I2C3_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x84000)
-#define MX31_USB_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x88000)
-#define MX31_USB_OTG_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0000)
-#define MX31_USB_HS1_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0200)
-#define MX31_USB_HS2_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0400)
-#define MX31_ATA_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x8c000)
-#define MX31_UART1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x90000)
-#define MX31_UART2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x94000)
-#define MX31_I2C2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x98000)
-#define MX31_OWIRE_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x9c000)
-#define MX31_SSI1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xa0000)
-#define MX31_CSPI1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xa4000)
-#define MX31_KPP_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xa8000)
-#define MX31_IOMUXC_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xac000)
-#define MX31_UART4_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xb0000)
-#define MX31_UART5_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xb4000)
-#define MX31_ECT_IP1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xb8000)
-#define MX31_ECT_IP2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xbc000)
-
#define MX31_SPBA0_BASE_ADDR 0x50000000
#define MX31_SPBA0_SIZE SZ_1M
-#define MX31_SDHC1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x04000)
-#define MX31_SDHC2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x08000)
-#define MX31_UART3_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x0c000)
-#define MX31_CSPI2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x10000)
-#define MX31_SSI2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x14000)
-#define MX31_SIM1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x18000)
-#define MX31_IIM_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x1c000)
-#define MX31_ATA_DMA_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x20000)
-#define MX31_MSHC1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x24000)
-#define MX31_SPBA_CTRL_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x3c000)
-
#define MX31_AIPS2_BASE_ADDR 0x53f00000
#define MX31_AIPS2_SIZE SZ_1M
-#define MX31_CCM_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x80000)
-#define MX31_CSPI3_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x84000)
-#define MX31_FIRI_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x8c000)
-#define MX31_GPT1_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x90000)
-#define MX31_EPIT1_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x94000)
-#define MX31_EPIT2_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x98000)
-#define MX31_GPIO3_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xa4000)
-#define MX31_SCC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xac000)
-#define MX31_SCM_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xae000)
-#define MX31_SMN_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xaf000)
-#define MX31_RNGA_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xb0000)
-#define MX31_IPU_CTRL_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xc0000)
-#define MX31_AUDMUX_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xc4000)
-#define MX31_MPEG4_ENC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xc8000)
-#define MX31_GPIO1_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xcc000)
-#define MX31_GPIO2_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xd0000)
-#define MX31_SDMA_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xd4000)
-#define MX31_RTC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xd8000)
-#define MX31_WDOG_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xdc000)
-#define MX31_PWM_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xe0000)
-#define MX31_RTIC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xec000)
-
-#define MX31_ROMP_BASE_ADDR 0x60000000
-#define MX31_ROMP_BASE_ADDR_VIRT IOMEM(0xfc500000)
-#define MX31_ROMP_SIZE SZ_1M
-
#define MX31_AVIC_BASE_ADDR 0x68000000
#define MX31_AVIC_SIZE SZ_1M
-
-#define MX31_IPU_MEM_BASE_ADDR 0x70000000
-#define MX31_CSD0_BASE_ADDR 0x80000000
-#define MX31_CSD1_BASE_ADDR 0x90000000
-
-#define MX31_CS0_BASE_ADDR 0xa0000000
-#define MX31_CS1_BASE_ADDR 0xa8000000
-#define MX31_CS2_BASE_ADDR 0xb0000000
-#define MX31_CS3_BASE_ADDR 0xb2000000
-
-#define MX31_CS4_BASE_ADDR 0xb4000000
-#define MX31_CS4_BASE_ADDR_VIRT IOMEM(0xf6000000)
-#define MX31_CS4_SIZE SZ_32M
-
-#define MX31_CS5_BASE_ADDR 0xb6000000
-#define MX31_CS5_BASE_ADDR_VIRT IOMEM(0xf8000000)
-#define MX31_CS5_SIZE SZ_32M
-
#define MX31_X_MEMC_BASE_ADDR 0xb8000000
#define MX31_X_MEMC_SIZE SZ_64K
-#define MX31_NFC_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x0000)
-#define MX31_ESDCTL_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x1000)
-#define MX31_WEIM_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x2000)
-#define MX31_M3IF_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x3000)
-#define MX31_EMI_CTL_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x4000)
-#define MX31_PCMCIA_CTL_BASE_ADDR MX31_EMI_CTL_BASE_ADDR
-
-#define MX31_WEIM_CSCRx_BASE_ADDR(cs) (MX31_WEIM_BASE_ADDR + (cs) * 0x10)
-#define MX31_WEIM_CSCRxU(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs))
-#define MX31_WEIM_CSCRxL(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x4)
-#define MX31_WEIM_CSCRxA(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x8)
-
-#define MX31_PCMCIA_MEM_BASE_ADDR 0xbc000000
#define MX31_IO_P2V(x) IMX_IO_P2V(x)
-#define MX31_IO_ADDRESS(x) IOMEM(MX31_IO_P2V(x))
-
-/*
- * Interrupt numbers
- */
-#include <asm/irq.h>
-#define MX31_INT_I2C3 (NR_IRQS_LEGACY + 3)
-#define MX31_INT_I2C2 (NR_IRQS_LEGACY + 4)
-#define MX31_INT_MPEG4_ENCODER (NR_IRQS_LEGACY + 5)
-#define MX31_INT_RTIC (NR_IRQS_LEGACY + 6)
-#define MX31_INT_FIRI (NR_IRQS_LEGACY + 7)
-#define MX31_INT_SDHC2 (NR_IRQS_LEGACY + 8)
-#define MX31_INT_SDHC1 (NR_IRQS_LEGACY + 9)
-#define MX31_INT_I2C1 (NR_IRQS_LEGACY + 10)
-#define MX31_INT_SSI2 (NR_IRQS_LEGACY + 11)
-#define MX31_INT_SSI1 (NR_IRQS_LEGACY + 12)
-#define MX31_INT_CSPI2 (NR_IRQS_LEGACY + 13)
-#define MX31_INT_CSPI1 (NR_IRQS_LEGACY + 14)
-#define MX31_INT_ATA (NR_IRQS_LEGACY + 15)
-#define MX31_INT_MBX (NR_IRQS_LEGACY + 16)
-#define MX31_INT_CSPI3 (NR_IRQS_LEGACY + 17)
-#define MX31_INT_UART3 (NR_IRQS_LEGACY + 18)
-#define MX31_INT_IIM (NR_IRQS_LEGACY + 19)
-#define MX31_INT_SIM2 (NR_IRQS_LEGACY + 20)
-#define MX31_INT_SIM1 (NR_IRQS_LEGACY + 21)
-#define MX31_INT_RNGA (NR_IRQS_LEGACY + 22)
-#define MX31_INT_EVTMON (NR_IRQS_LEGACY + 23)
-#define MX31_INT_KPP (NR_IRQS_LEGACY + 24)
-#define MX31_INT_RTC (NR_IRQS_LEGACY + 25)
-#define MX31_INT_PWM (NR_IRQS_LEGACY + 26)
-#define MX31_INT_EPIT2 (NR_IRQS_LEGACY + 27)
-#define MX31_INT_EPIT1 (NR_IRQS_LEGACY + 28)
-#define MX31_INT_GPT (NR_IRQS_LEGACY + 29)
-#define MX31_INT_POWER_FAIL (NR_IRQS_LEGACY + 30)
-#define MX31_INT_CCM_DVFS (NR_IRQS_LEGACY + 31)
-#define MX31_INT_UART2 (NR_IRQS_LEGACY + 32)
-#define MX31_INT_NFC (NR_IRQS_LEGACY + 33)
-#define MX31_INT_SDMA (NR_IRQS_LEGACY + 34)
-#define MX31_INT_USB_HS1 (NR_IRQS_LEGACY + 35)
-#define MX31_INT_USB_HS2 (NR_IRQS_LEGACY + 36)
-#define MX31_INT_USB_OTG (NR_IRQS_LEGACY + 37)
-#define MX31_INT_MSHC1 (NR_IRQS_LEGACY + 39)
-#define MX31_INT_MSHC2 (NR_IRQS_LEGACY + 40)
-#define MX31_INT_IPU_ERR (NR_IRQS_LEGACY + 41)
-#define MX31_INT_IPU_SYN (NR_IRQS_LEGACY + 42)
-#define MX31_INT_UART1 (NR_IRQS_LEGACY + 45)
-#define MX31_INT_UART4 (NR_IRQS_LEGACY + 46)
-#define MX31_INT_UART5 (NR_IRQS_LEGACY + 47)
-#define MX31_INT_ECT (NR_IRQS_LEGACY + 48)
-#define MX31_INT_SCC_SCM (NR_IRQS_LEGACY + 49)
-#define MX31_INT_SCC_SMN (NR_IRQS_LEGACY + 50)
-#define MX31_INT_GPIO2 (NR_IRQS_LEGACY + 51)
-#define MX31_INT_GPIO1 (NR_IRQS_LEGACY + 52)
-#define MX31_INT_CCM (NR_IRQS_LEGACY + 53)
-#define MX31_INT_PCMCIA (NR_IRQS_LEGACY + 54)
-#define MX31_INT_WDOG (NR_IRQS_LEGACY + 55)
-#define MX31_INT_GPIO3 (NR_IRQS_LEGACY + 56)
-#define MX31_INT_EXT_POWER (NR_IRQS_LEGACY + 58)
-#define MX31_INT_EXT_TEMPER (NR_IRQS_LEGACY + 59)
-#define MX31_INT_EXT_SENSOR60 (NR_IRQS_LEGACY + 60)
-#define MX31_INT_EXT_SENSOR61 (NR_IRQS_LEGACY + 61)
-#define MX31_INT_EXT_WDOG (NR_IRQS_LEGACY + 62)
-#define MX31_INT_EXT_TV (NR_IRQS_LEGACY + 63)
-
-#define MX31_DMA_REQ_SDHC1 20
-#define MX31_DMA_REQ_SDHC2 21
-#define MX31_DMA_REQ_SSI2_RX1 22
-#define MX31_DMA_REQ_SSI2_TX1 23
-#define MX31_DMA_REQ_SSI2_RX0 24
-#define MX31_DMA_REQ_SSI2_TX0 25
-#define MX31_DMA_REQ_SSI1_RX1 26
-#define MX31_DMA_REQ_SSI1_TX1 27
-#define MX31_DMA_REQ_SSI1_RX0 28
-#define MX31_DMA_REQ_SSI1_TX0 29
-
-#define MX31_PROD_SIGNATURE 0x1 /* For MX31 */
#endif /* ifndef __MACH_MX31_H__ */
diff --git a/arch/arm/mach-imx/mx31lilly-db.c b/arch/arm/mach-imx/mx31lilly-db.c
deleted file mode 100644
index 00a5ee30d5dd..000000000000
--- a/arch/arm/mach-imx/mx31lilly-db.c
+++ /dev/null
@@ -1,182 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * LILLY-1131 development board support
- *
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- *
- * based on code for other MX31 boards,
- *
- * Copyright 2005-2007 Freescale Semiconductor
- * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "board-mx31lilly.h"
-#include "common.h"
-#include "devices-imx31.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-
-/*
- * This file contains board-specific initialization routines for the
- * LILLY-1131 development board. If you design an own baseboard for the
- * module, use this file as base for support code.
- */
-
-static unsigned int lilly_db_board_pins[] __initdata = {
- MX31_PIN_SD1_DATA3__SD1_DATA3,
- MX31_PIN_SD1_DATA2__SD1_DATA2,
- MX31_PIN_SD1_DATA1__SD1_DATA1,
- MX31_PIN_SD1_DATA0__SD1_DATA0,
- MX31_PIN_SD1_CLK__SD1_CLK,
- MX31_PIN_SD1_CMD__SD1_CMD,
- MX31_PIN_LD0__LD0,
- MX31_PIN_LD1__LD1,
- MX31_PIN_LD2__LD2,
- MX31_PIN_LD3__LD3,
- MX31_PIN_LD4__LD4,
- MX31_PIN_LD5__LD5,
- MX31_PIN_LD6__LD6,
- MX31_PIN_LD7__LD7,
- MX31_PIN_LD8__LD8,
- MX31_PIN_LD9__LD9,
- MX31_PIN_LD10__LD10,
- MX31_PIN_LD11__LD11,
- MX31_PIN_LD12__LD12,
- MX31_PIN_LD13__LD13,
- MX31_PIN_LD14__LD14,
- MX31_PIN_LD15__LD15,
- MX31_PIN_LD16__LD16,
- MX31_PIN_LD17__LD17,
- MX31_PIN_VSYNC3__VSYNC3,
- MX31_PIN_HSYNC__HSYNC,
- MX31_PIN_FPSHIFT__FPSHIFT,
- MX31_PIN_DRDY0__DRDY0,
- MX31_PIN_CONTRAST__CONTRAST,
-};
-
-/* MMC support */
-
-static int mxc_mmc1_get_ro(struct device *dev)
-{
- return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0));
-}
-
-static int gpio_det, gpio_wp;
-
-#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
- PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-static int mxc_mmc1_init(struct device *dev,
- irq_handler_t detect_irq, void *data)
-{
- int ret;
-
- gpio_det = IOMUX_TO_GPIO(MX31_PIN_GPIO1_1);
- gpio_wp = IOMUX_TO_GPIO(MX31_PIN_LCS0);
-
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG);
-
- ret = gpio_request(gpio_det, "MMC detect");
- if (ret)
- return ret;
-
- ret = gpio_request(gpio_wp, "MMC w/p");
- if (ret)
- goto exit_free_det;
-
- gpio_direction_input(gpio_det);
- gpio_direction_input(gpio_wp);
-
- ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)),
- detect_irq, IRQF_TRIGGER_FALLING,
- "MMC detect", data);
- if (ret)
- goto exit_free_wp;
-
- return 0;
-
-exit_free_wp:
- gpio_free(gpio_wp);
-
-exit_free_det:
- gpio_free(gpio_det);
-
- return ret;
-}
-
-static void mxc_mmc1_exit(struct device *dev, void *data)
-{
- gpio_free(gpio_det);
- gpio_free(gpio_wp);
- free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)), data);
-}
-
-static const struct imxmmc_platform_data mmc_pdata __initconst = {
- .get_ro = mxc_mmc1_get_ro,
- .init = mxc_mmc1_init,
- .exit = mxc_mmc1_exit,
-};
-
-/* Framebuffer support */
-static const struct fb_videomode fb_modedb = {
- /* 640x480 TFT panel (IPS-056T) */
- .name = "CRT-VGA",
- .refresh = 64,
- .xres = 640,
- .yres = 480,
- .pixclock = 30000,
- .left_margin = 200,
- .right_margin = 2,
- .upper_margin = 2,
- .lower_margin = 2,
- .hsync_len = 3,
- .vsync_len = 1,
- .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
-};
-
-static struct mx3fb_platform_data fb_pdata __initdata = {
- .name = "CRT-VGA",
- .mode = &fb_modedb,
- .num_modes = 1,
-};
-
-#define LCD_VCC_EN_GPIO (7)
-
-static void __init mx31lilly_init_fb(void)
-{
- if (gpio_request(LCD_VCC_EN_GPIO, "LCD enable") != 0) {
- printk(KERN_WARNING "unable to request LCD_VCC_EN pin.\n");
- return;
- }
-
- imx31_add_ipu_core();
- imx31_add_mx3_sdc_fb(&fb_pdata);
- gpio_direction_output(LCD_VCC_EN_GPIO, 1);
-}
-
-void __init mx31lilly_db_init(void)
-{
- mxc_iomux_setup_multiple_pins(lilly_db_board_pins,
- ARRAY_SIZE(lilly_db_board_pins),
- "development board pins");
- imx31_add_mxc_mmc(0, &mmc_pdata);
- mx31lilly_init_fb();
-}
diff --git a/arch/arm/mach-imx/mx31lite-db.c b/arch/arm/mach-imx/mx31lite-db.c
deleted file mode 100644
index 13da7325c32b..000000000000
--- a/arch/arm/mach-imx/mx31lite-db.c
+++ /dev/null
@@ -1,154 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * LogicPD i.MX31 SOM-LV development board support
- *
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- *
- * based on code for other MX31 boards,
- *
- * Copyright 2005-2007 Freescale Semiconductor
- * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "board-mx31lite.h"
-#include "common.h"
-#include "devices-imx31.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-
-/*
- * This file contains board-specific initialization routines for the
- * LogicPD i.MX31 SOM-LV development board, aka 'LiteKit'.
- * If you design an own baseboard for the module, use this file as base
- * for support code.
- */
-
-static unsigned int litekit_db_board_pins[] __initdata = {
- /* SDHC1 */
- MX31_PIN_SD1_DATA0__SD1_DATA0,
- MX31_PIN_SD1_DATA1__SD1_DATA1,
- MX31_PIN_SD1_DATA2__SD1_DATA2,
- MX31_PIN_SD1_DATA3__SD1_DATA3,
- MX31_PIN_SD1_CLK__SD1_CLK,
- MX31_PIN_SD1_CMD__SD1_CMD,
-};
-
-/* MMC */
-
-static int gpio_det, gpio_wp;
-
-#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
- PAD_CTL_ODE_CMOS)
-
-static int mxc_mmc1_get_ro(struct device *dev)
-{
- return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_GPIO1_6));
-}
-
-static int mxc_mmc1_init(struct device *dev,
- irq_handler_t detect_irq, void *data)
-{
- int ret;
-
- gpio_det = IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1);
- gpio_wp = IOMUX_TO_GPIO(MX31_PIN_GPIO1_6);
-
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA0,
- MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA1,
- MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA2,
- MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA3,
- MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX31_PIN_SD1_CMD,
- MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
-
- ret = gpio_request(gpio_det, "MMC detect");
- if (ret)
- return ret;
-
- ret = gpio_request(gpio_wp, "MMC w/p");
- if (ret)
- goto exit_free_det;
-
- gpio_direction_input(gpio_det);
- gpio_direction_input(gpio_wp);
-
- ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)),
- detect_irq,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "MMC detect", data);
- if (ret)
- goto exit_free_wp;
-
- return 0;
-
-exit_free_wp:
- gpio_free(gpio_wp);
-
-exit_free_det:
- gpio_free(gpio_det);
-
- return ret;
-}
-
-static void mxc_mmc1_exit(struct device *dev, void *data)
-{
- gpio_free(gpio_det);
- gpio_free(gpio_wp);
- free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)), data);
-}
-
-static const struct imxmmc_platform_data mmc_pdata __initconst = {
- .get_ro = mxc_mmc1_get_ro,
- .init = mxc_mmc1_init,
- .exit = mxc_mmc1_exit,
-};
-
-/* GPIO LEDs */
-
-static const struct gpio_led litekit_leds[] __initconst = {
- {
- .name = "GPIO0",
- .gpio = IOMUX_TO_GPIO(MX31_PIN_COMPARE),
- .active_low = 1,
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- {
- .name = "GPIO1",
- .gpio = IOMUX_TO_GPIO(MX31_PIN_CAPTURE),
- .active_low = 1,
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- }
-};
-
-static const struct gpio_led_platform_data
- litekit_led_platform_data __initconst = {
- .leds = litekit_leds,
- .num_leds = ARRAY_SIZE(litekit_leds),
-};
-
-void __init mx31lite_db_init(void)
-{
- mxc_iomux_setup_multiple_pins(litekit_db_board_pins,
- ARRAY_SIZE(litekit_db_board_pins),
- "development board pins");
- imx31_add_mxc_mmc(0, &mmc_pdata);
- gpio_led_register_device(-1, &litekit_led_platform_data);
- imx31_add_imx2_wdt();
- imx31_add_mxc_rtc();
-}
diff --git a/arch/arm/mach-imx/mx31moboard-devboard.c b/arch/arm/mach-imx/mx31moboard-devboard.c
deleted file mode 100644
index 6a9db0663a80..000000000000
--- a/arch/arm/mach-imx/mx31moboard-devboard.c
+++ /dev/null
@@ -1,238 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- */
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-
-#include <linux/usb/otg.h>
-
-#include "board-mx31moboard.h"
-#include "common.h"
-#include "devices-imx31.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-#include "ulpi.h"
-
-static unsigned int devboard_pins[] = {
- /* UART1 */
- MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
- MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
- /* SDHC2 */
- MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
- MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
- MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
- MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
- /* USB H1 */
- MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
- MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP,
- MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
- MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
- MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
- /* SEL */
- MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
- MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
-#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
-
-static int devboard_sdhc2_get_ro(struct device *dev)
-{
- return !gpio_get_value(SDHC2_WP);
-}
-
-static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
- void *data)
-{
- int ret;
-
- ret = gpio_request(SDHC2_CD, "sdhc-detect");
- if (ret)
- return ret;
-
- gpio_direction_input(SDHC2_CD);
-
- ret = gpio_request(SDHC2_WP, "sdhc-wp");
- if (ret)
- goto err_gpio_free;
- gpio_direction_input(SDHC2_WP);
-
- ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "sdhc2-card-detect", data);
- if (ret)
- goto err_gpio_free_2;
-
- return 0;
-
-err_gpio_free_2:
- gpio_free(SDHC2_WP);
-err_gpio_free:
- gpio_free(SDHC2_CD);
-
- return ret;
-}
-
-static void devboard_sdhc2_exit(struct device *dev, void *data)
-{
- free_irq(gpio_to_irq(SDHC2_CD), data);
- gpio_free(SDHC2_WP);
- gpio_free(SDHC2_CD);
-}
-
-static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
- .get_ro = devboard_sdhc2_get_ro,
- .init = devboard_sdhc2_init,
- .exit = devboard_sdhc2_exit,
-};
-
-#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
-#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
-#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
-#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
-
-static void devboard_init_sel_gpios(void)
-{
- if (!gpio_request(SEL0, "sel0")) {
- gpio_direction_input(SEL0);
- gpio_export(SEL0, true);
- }
-
- if (!gpio_request(SEL1, "sel1")) {
- gpio_direction_input(SEL1);
- gpio_export(SEL1, true);
- }
-
- if (!gpio_request(SEL2, "sel2")) {
- gpio_direction_input(SEL2);
- gpio_export(SEL2, true);
- }
-
- if (!gpio_request(SEL3, "sel3")) {
- gpio_direction_input(SEL3);
- gpio_export(SEL3, true);
- }
-}
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
- PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-static int devboard_usbh1_hw_init(struct platform_device *pdev)
-{
- mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
-
- mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
-
- mdelay(10);
-
- return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
- MXC_EHCI_INTERFACE_SINGLE_UNI);
-}
-
-#define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
-#define USBH1_MODE IOMUX_TO_GPIO(MX31_PIN_NFALE)
-
-static int devboard_isp1105_init(struct usb_phy *otg)
-{
- int ret = gpio_request(USBH1_MODE, "usbh1-mode");
- if (ret)
- return ret;
- /* single ended */
- gpio_direction_output(USBH1_MODE, 0);
-
- ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen");
- if (ret) {
- gpio_free(USBH1_MODE);
- return ret;
- }
- gpio_direction_output(USBH1_VBUSEN_B, 1);
-
- return 0;
-}
-
-
-static int devboard_isp1105_set_vbus(struct usb_otg *otg, bool on)
-{
- if (on)
- gpio_set_value(USBH1_VBUSEN_B, 0);
- else
- gpio_set_value(USBH1_VBUSEN_B, 1);
-
- return 0;
-}
-
-static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
- .init = devboard_usbh1_hw_init,
- .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
-};
-
-static int __init devboard_usbh1_init(void)
-{
- struct usb_phy *phy;
- struct platform_device *pdev;
-
- phy = kzalloc(sizeof(*phy), GFP_KERNEL);
- if (!phy)
- return -ENOMEM;
-
- phy->otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
- if (!phy->otg) {
- kfree(phy);
- return -ENOMEM;
- }
-
- phy->label = "ISP1105";
- phy->init = devboard_isp1105_init;
- phy->otg->set_vbus = devboard_isp1105_set_vbus;
-
- usbh1_pdata.otg = phy;
-
- pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
-
- return PTR_ERR_OR_ZERO(pdev);
-}
-
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_ULPI,
-};
-
-/*
- * system init for baseboard usage. Will be called by mx31moboard init.
- */
-void __init mx31moboard_devboard_init(void)
-{
- printk(KERN_INFO "Initializing mx31devboard peripherals\n");
-
- mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins),
- "devboard");
-
- imx31_add_imx_uart1(&uart_pdata);
-
- imx31_add_mxc_mmc(1, &sdhc2_pdata);
-
- devboard_init_sel_gpios();
-
- imx31_add_fsl_usb2_udc(&usb_pdata);
-
- devboard_usbh1_init();
-}
diff --git a/arch/arm/mach-imx/mx31moboard-marxbot.c b/arch/arm/mach-imx/mx31moboard-marxbot.c
deleted file mode 100644
index c2690008e6fc..000000000000
--- a/arch/arm/mach-imx/mx31moboard-marxbot.c
+++ /dev/null
@@ -1,270 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/spi/spi.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-
-#include <linux/usb/otg.h>
-
-#include "board-mx31moboard.h"
-#include "common.h"
-#include "devices-imx31.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-#include "ulpi.h"
-
-static unsigned int marxbot_pins[] = {
- /* SDHC2 */
- MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
- MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
- MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
- MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
- /* dsPIC resets */
- MX31_PIN_STXD5__GPIO1_21, MX31_PIN_SRXD5__GPIO1_22,
- /*battery detection */
- MX31_PIN_LCS0__GPIO3_23,
- /* USB H1 */
- MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
- MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP,
- MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
- MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
- MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
- /* SEL */
- MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
- MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
-};
-
-#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
-#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
-
-static int marxbot_sdhc2_get_ro(struct device *dev)
-{
- return !gpio_get_value(SDHC2_WP);
-}
-
-static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
- void *data)
-{
- int ret;
-
- ret = gpio_request(SDHC2_CD, "sdhc-detect");
- if (ret)
- return ret;
-
- gpio_direction_input(SDHC2_CD);
-
- ret = gpio_request(SDHC2_WP, "sdhc-wp");
- if (ret)
- goto err_gpio_free;
- gpio_direction_input(SDHC2_WP);
-
- ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "sdhc2-card-detect", data);
- if (ret)
- goto err_gpio_free_2;
-
- return 0;
-
-err_gpio_free_2:
- gpio_free(SDHC2_WP);
-err_gpio_free:
- gpio_free(SDHC2_CD);
-
- return ret;
-}
-
-static void marxbot_sdhc2_exit(struct device *dev, void *data)
-{
- free_irq(gpio_to_irq(SDHC2_CD), data);
- gpio_free(SDHC2_WP);
- gpio_free(SDHC2_CD);
-}
-
-static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
- .get_ro = marxbot_sdhc2_get_ro,
- .init = marxbot_sdhc2_init,
- .exit = marxbot_sdhc2_exit,
-};
-
-#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_STXD5)
-#define DSPICS_RST_B IOMUX_TO_GPIO(MX31_PIN_SRXD5)
-
-static void dspics_resets_init(void)
-{
- if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
- gpio_direction_output(TRSLAT_RST_B, 0);
- gpio_export(TRSLAT_RST_B, false);
- }
-
- if (!gpio_request(DSPICS_RST_B, "dspics-rst")) {
- gpio_direction_output(DSPICS_RST_B, 0);
- gpio_export(DSPICS_RST_B, false);
- }
-}
-
-static struct spi_board_info marxbot_spi_board_info[] __initdata = {
- {
- .modalias = "spidev",
- .max_speed_hz = 300000,
- .bus_num = 1,
- .chip_select = 1, /* according spi1_cs[] ! */
- },
-};
-
-#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
-#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
-#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
-#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
-
-static void marxbot_init_sel_gpios(void)
-{
- if (!gpio_request(SEL0, "sel0")) {
- gpio_direction_input(SEL0);
- gpio_export(SEL0, true);
- }
-
- if (!gpio_request(SEL1, "sel1")) {
- gpio_direction_input(SEL1);
- gpio_export(SEL1, true);
- }
-
- if (!gpio_request(SEL2, "sel2")) {
- gpio_direction_input(SEL2);
- gpio_export(SEL2, true);
- }
-
- if (!gpio_request(SEL3, "sel3")) {
- gpio_direction_input(SEL3);
- gpio_export(SEL3, true);
- }
-}
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
- PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-static int marxbot_usbh1_hw_init(struct platform_device *pdev)
-{
- mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
-
- mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
-
- mdelay(10);
-
- return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
- MXC_EHCI_INTERFACE_SINGLE_UNI);
-}
-
-#define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
-#define USBH1_MODE IOMUX_TO_GPIO(MX31_PIN_NFALE)
-
-static int marxbot_isp1105_init(struct usb_phy *otg)
-{
- int ret = gpio_request(USBH1_MODE, "usbh1-mode");
- if (ret)
- return ret;
- /* single ended */
- gpio_direction_output(USBH1_MODE, 0);
-
- ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen");
- if (ret) {
- gpio_free(USBH1_MODE);
- return ret;
- }
- gpio_direction_output(USBH1_VBUSEN_B, 1);
-
- return 0;
-}
-
-
-static int marxbot_isp1105_set_vbus(struct usb_otg *otg, bool on)
-{
- if (on)
- gpio_set_value(USBH1_VBUSEN_B, 0);
- else
- gpio_set_value(USBH1_VBUSEN_B, 1);
-
- return 0;
-}
-
-static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
- .init = marxbot_usbh1_hw_init,
- .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
-};
-
-static int __init marxbot_usbh1_init(void)
-{
- struct usb_phy *phy;
- struct platform_device *pdev;
-
- phy = kzalloc(sizeof(*phy), GFP_KERNEL);
- if (!phy)
- return -ENOMEM;
-
- phy->otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
- if (!phy->otg) {
- kfree(phy);
- return -ENOMEM;
- }
-
- phy->label = "ISP1105";
- phy->init = marxbot_isp1105_init;
- phy->otg->set_vbus = marxbot_isp1105_set_vbus;
-
- usbh1_pdata.otg = phy;
-
- pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
-
- return PTR_ERR_OR_ZERO(pdev);
-}
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_ULPI,
-};
-
-/*
- * system init for baseboard usage. Will be called by mx31moboard init.
- */
-void __init mx31moboard_marxbot_init(void)
-{
- printk(KERN_INFO "Initializing mx31marxbot peripherals\n");
-
- mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins),
- "marxbot");
-
- marxbot_init_sel_gpios();
-
- dspics_resets_init();
-
- imx31_add_mxc_mmc(1, &sdhc2_pdata);
-
- spi_register_board_info(marxbot_spi_board_info,
- ARRAY_SIZE(marxbot_spi_board_info));
-
- /* battery present pin */
- gpio_request(IOMUX_TO_GPIO(MX31_PIN_LCS0), "bat-present");
- gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0));
- gpio_export(IOMUX_TO_GPIO(MX31_PIN_LCS0), false);
-
- imx31_add_fsl_usb2_udc(&usb_pdata);
-
- marxbot_usbh1_init();
-}
diff --git a/arch/arm/mach-imx/mx31moboard-smartbot.c b/arch/arm/mach-imx/mx31moboard-smartbot.c
deleted file mode 100644
index d165bd952bad..000000000000
--- a/arch/arm/mach-imx/mx31moboard-smartbot.c
+++ /dev/null
@@ -1,124 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include "board-mx31moboard.h"
-#include "common.h"
-#include "devices-imx31.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-#include "ulpi.h"
-
-static unsigned int smartbot_pins[] = {
- /* UART1 */
- MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
- MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
- /* ENABLES */
- MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
- MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_ULPI,
-};
-
-#if defined(CONFIG_USB_ULPI)
-
-static int smartbot_otg_init(struct platform_device *pdev)
-{
- return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
-}
-
-static struct mxc_usbh_platform_data otg_host_pdata __initdata = {
- .init = smartbot_otg_init,
- .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-};
-
-static int __init smartbot_otg_host_init(void)
-{
- struct platform_device *pdev;
-
- otg_host_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT);
- if (!otg_host_pdata.otg)
- return -ENODEV;
-
- pdev = imx31_add_mxc_ehci_otg(&otg_host_pdata);
-
- return PTR_ERR_OR_ZERO(pdev);
-}
-#else
-static inline int smartbot_otg_host_init(void) { return 0; }
-#endif
-
-#define POWER_EN IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
-#define DSPIC_RST_B IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
-#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
-#define TRSLAT_SRC_CHOICE IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
-
-static void smartbot_resets_init(void)
-{
- if (!gpio_request(POWER_EN, "power-enable")) {
- gpio_direction_output(POWER_EN, 0);
- gpio_export(POWER_EN, false);
- }
-
- if (!gpio_request(DSPIC_RST_B, "dspic-rst")) {
- gpio_direction_output(DSPIC_RST_B, 0);
- gpio_export(DSPIC_RST_B, false);
- }
-
- if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
- gpio_direction_output(TRSLAT_RST_B, 0);
- gpio_export(TRSLAT_RST_B, false);
- }
-
- if (!gpio_request(TRSLAT_SRC_CHOICE, "translator-src-choice")) {
- gpio_direction_output(TRSLAT_SRC_CHOICE, 0);
- gpio_export(TRSLAT_SRC_CHOICE, false);
- }
-}
-/*
- * system init for baseboard usage. Will be called by mx31moboard init.
- */
-void __init mx31moboard_smartbot_init(int board)
-{
- printk(KERN_INFO "Initializing mx31smartbot peripherals\n");
-
- mxc_iomux_setup_multiple_pins(smartbot_pins, ARRAY_SIZE(smartbot_pins),
- "smartbot");
-
- imx31_add_imx_uart1(&uart_pdata);
-
- switch (board) {
- case MX31SMARTBOT:
- imx31_add_fsl_usb2_udc(&usb_pdata);
- break;
- case MX31EYEBOT:
- smartbot_otg_host_init();
- break;
- default:
- printk(KERN_WARNING "Unknown board %d, USB OTG not initialized",
- board);
- }
-
- smartbot_resets_init();
-}
diff --git a/arch/arm/mach-imx/mx35.h b/arch/arm/mach-imx/mx35.h
index 760de6a0af7e..5a8a87a85c14 100644
--- a/arch/arm/mach-imx/mx35.h
+++ b/arch/arm/mach-imx/mx35.h
@@ -2,190 +2,17 @@
#ifndef __MACH_MX35_H__
#define __MACH_MX35_H__
-/*
- * IRAM
- */
-#define MX35_IRAM_BASE_ADDR 0x10000000 /* internal ram */
-#define MX35_IRAM_SIZE SZ_128K
-
-#define MX35_L2CC_BASE_ADDR 0x30000000
-#define MX35_L2CC_SIZE SZ_1M
-
#define MX35_AIPS1_BASE_ADDR 0x43f00000
#define MX35_AIPS1_SIZE SZ_1M
-#define MX35_MAX_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x04000)
-#define MX35_EVTMON_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x08000)
-#define MX35_CLKCTL_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x0c000)
-#define MX35_ETB_SLOT4_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x10000)
-#define MX35_ETB_SLOT5_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x14000)
-#define MX35_ECT_CTIO_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x18000)
-#define MX35_I2C1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x80000)
-#define MX35_I2C3_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x84000)
-#define MX35_UART1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x90000)
-#define MX35_UART2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x94000)
-#define MX35_I2C2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x98000)
-#define MX35_OWIRE_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x9c000)
-#define MX35_SSI1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xa0000)
-#define MX35_CSPI1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xa4000)
-#define MX35_KPP_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xa8000)
-#define MX35_IOMUXC_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xac000)
-#define MX35_ECT_IP1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xb8000)
-#define MX35_ECT_IP2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xbc000)
-
#define MX35_SPBA0_BASE_ADDR 0x50000000
#define MX35_SPBA0_SIZE SZ_1M
-#define MX35_UART3_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x0c000)
-#define MX35_CSPI2_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x10000)
-#define MX35_SSI2_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x14000)
-#define MX35_ATA_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x20000)
-#define MX35_MSHC1_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x24000)
-#define MX35_FEC_BASE_ADDR 0x50038000
-#define MX35_SPBA_CTRL_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x3c000)
-
#define MX35_AIPS2_BASE_ADDR 0x53f00000
#define MX35_AIPS2_SIZE SZ_1M
-#define MX35_CCM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x80000)
-#define MX35_GPT1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x90000)
-#define MX35_EPIT1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x94000)
-#define MX35_EPIT2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x98000)
-#define MX35_GPIO3_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xa4000)
-#define MX35_SCC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xac000)
-#define MX35_RNGA_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb0000)
-#define MX35_ESDHC1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb4000)
-#define MX35_ESDHC2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb8000)
-#define MX35_ESDHC3_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xbc000)
-#define MX35_IPU_CTRL_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xc0000)
-#define MX35_AUDMUX_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xc4000)
-#define MX35_GPIO1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xcc000)
-#define MX35_GPIO2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd0000)
-#define MX35_SDMA_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd4000)
-#define MX35_RTC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd8000)
-#define MX35_WDOG_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xdc000)
-#define MX35_PWM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe0000)
-#define MX35_CAN1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe4000)
-#define MX35_CAN2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe8000)
-#define MX35_RTIC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xec000)
-#define MX35_IIM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xf0000)
-#define MX35_USB_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xf4000)
-#define MX35_USB_OTG_BASE_ADDR (MX35_USB_BASE_ADDR + 0x0000)
-/*
- * The Reference Manual (IMX35RM, Rev. 2, 3/2009) claims an offset of 0x200 for
- * HS. When host support was implemented only a preliminary document was
- * available, which told 0x400. This works fine.
- */
-#define MX35_USB_HS_BASE_ADDR (MX35_USB_BASE_ADDR + 0x0400)
-
-#define MX35_ROMP_BASE_ADDR 0x60000000
-#define MX35_ROMP_SIZE SZ_1M
-
#define MX35_AVIC_BASE_ADDR 0x68000000
#define MX35_AVIC_SIZE SZ_1M
-
-/*
- * Memory regions and CS
- */
-#define MX35_IPU_MEM_BASE_ADDR 0x70000000
-#define MX35_CSD0_BASE_ADDR 0x80000000
-#define MX35_CSD1_BASE_ADDR 0x90000000
-
-#define MX35_CS0_BASE_ADDR 0xa0000000
-#define MX35_CS1_BASE_ADDR 0xa8000000
-#define MX35_CS2_BASE_ADDR 0xb0000000
-#define MX35_CS3_BASE_ADDR 0xb2000000
-
-#define MX35_CS4_BASE_ADDR 0xb4000000
-#define MX35_CS4_BASE_ADDR_VIRT 0xf6000000
-#define MX35_CS4_SIZE SZ_32M
-
-#define MX35_CS5_BASE_ADDR 0xb6000000
-#define MX35_CS5_BASE_ADDR_VIRT 0xf8000000
-#define MX35_CS5_SIZE SZ_32M
-
-/*
- * NAND, SDRAM, WEIM, M3IF, EMI controllers
- */
#define MX35_X_MEMC_BASE_ADDR 0xb8000000
#define MX35_X_MEMC_SIZE SZ_64K
-#define MX35_ESDCTL_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x1000)
-#define MX35_WEIM_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x2000)
-#define MX35_M3IF_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x3000)
-#define MX35_EMI_CTL_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x4000)
-#define MX35_PCMCIA_CTL_BASE_ADDR MX35_EMI_CTL_BASE_ADDR
-
-#define MX35_NFC_BASE_ADDR 0xbb000000
-#define MX35_PCMCIA_MEM_BASE_ADDR 0xbc000000
#define MX35_IO_P2V(x) IMX_IO_P2V(x)
-#define MX35_IO_ADDRESS(x) IOMEM(MX35_IO_P2V(x))
-
-/*
- * Interrupt numbers
- */
-#include <asm/irq.h>
-#define MX35_INT_OWIRE (NR_IRQS_LEGACY + 2)
-#define MX35_INT_I2C3 (NR_IRQS_LEGACY + 3)
-#define MX35_INT_I2C2 (NR_IRQS_LEGACY + 4)
-#define MX35_INT_RTIC (NR_IRQS_LEGACY + 6)
-#define MX35_INT_ESDHC1 (NR_IRQS_LEGACY + 7)
-#define MX35_INT_ESDHC2 (NR_IRQS_LEGACY + 8)
-#define MX35_INT_ESDHC3 (NR_IRQS_LEGACY + 9)
-#define MX35_INT_I2C1 (NR_IRQS_LEGACY + 10)
-#define MX35_INT_SSI1 (NR_IRQS_LEGACY + 11)
-#define MX35_INT_SSI2 (NR_IRQS_LEGACY + 12)
-#define MX35_INT_CSPI2 (NR_IRQS_LEGACY + 13)
-#define MX35_INT_CSPI1 (NR_IRQS_LEGACY + 14)
-#define MX35_INT_ATA (NR_IRQS_LEGACY + 15)
-#define MX35_INT_GPU2D (NR_IRQS_LEGACY + 16)
-#define MX35_INT_ASRC (NR_IRQS_LEGACY + 17)
-#define MX35_INT_UART3 (NR_IRQS_LEGACY + 18)
-#define MX35_INT_IIM (NR_IRQS_LEGACY + 19)
-#define MX35_INT_RNGA (NR_IRQS_LEGACY + 22)
-#define MX35_INT_EVTMON (NR_IRQS_LEGACY + 23)
-#define MX35_INT_KPP (NR_IRQS_LEGACY + 24)
-#define MX35_INT_RTC (NR_IRQS_LEGACY + 25)
-#define MX35_INT_PWM (NR_IRQS_LEGACY + 26)
-#define MX35_INT_EPIT2 (NR_IRQS_LEGACY + 27)
-#define MX35_INT_EPIT1 (NR_IRQS_LEGACY + 28)
-#define MX35_INT_GPT (NR_IRQS_LEGACY + 29)
-#define MX35_INT_POWER_FAIL (NR_IRQS_LEGACY + 30)
-#define MX35_INT_UART2 (NR_IRQS_LEGACY + 32)
-#define MX35_INT_NFC (NR_IRQS_LEGACY + 33)
-#define MX35_INT_SDMA (NR_IRQS_LEGACY + 34)
-#define MX35_INT_USB_HS (NR_IRQS_LEGACY + 35)
-#define MX35_INT_USB_OTG (NR_IRQS_LEGACY + 37)
-#define MX35_INT_MSHC1 (NR_IRQS_LEGACY + 39)
-#define MX35_INT_ESAI (NR_IRQS_LEGACY + 40)
-#define MX35_INT_IPU_ERR (NR_IRQS_LEGACY + 41)
-#define MX35_INT_IPU_SYN (NR_IRQS_LEGACY + 42)
-#define MX35_INT_CAN1 (NR_IRQS_LEGACY + 43)
-#define MX35_INT_CAN2 (NR_IRQS_LEGACY + 44)
-#define MX35_INT_UART1 (NR_IRQS_LEGACY + 45)
-#define MX35_INT_MLB (NR_IRQS_LEGACY + 46)
-#define MX35_INT_SPDIF (NR_IRQS_LEGACY + 47)
-#define MX35_INT_ECT (NR_IRQS_LEGACY + 48)
-#define MX35_INT_SCC_SCM (NR_IRQS_LEGACY + 49)
-#define MX35_INT_SCC_SMN (NR_IRQS_LEGACY + 50)
-#define MX35_INT_GPIO2 (NR_IRQS_LEGACY + 51)
-#define MX35_INT_GPIO1 (NR_IRQS_LEGACY + 52)
-#define MX35_INT_WDOG (NR_IRQS_LEGACY + 55)
-#define MX35_INT_GPIO3 (NR_IRQS_LEGACY + 56)
-#define MX35_INT_FEC (NR_IRQS_LEGACY + 57)
-#define MX35_INT_EXT_POWER (NR_IRQS_LEGACY + 58)
-#define MX35_INT_EXT_TEMPER (NR_IRQS_LEGACY + 59)
-#define MX35_INT_EXT_SENSOR60 (NR_IRQS_LEGACY + 60)
-#define MX35_INT_EXT_SENSOR61 (NR_IRQS_LEGACY + 61)
-#define MX35_INT_EXT_WDOG (NR_IRQS_LEGACY + 62)
-#define MX35_INT_EXT_TV (NR_IRQS_LEGACY + 63)
-
-#define MX35_DMA_REQ_SSI2_RX1 22
-#define MX35_DMA_REQ_SSI2_TX1 23
-#define MX35_DMA_REQ_SSI2_RX0 24
-#define MX35_DMA_REQ_SSI2_TX0 25
-#define MX35_DMA_REQ_SSI1_RX1 26
-#define MX35_DMA_REQ_SSI1_TX1 27
-#define MX35_DMA_REQ_SSI1_RX0 28
-#define MX35_DMA_REQ_SSI1_TX0 29
-
-#define MX35_PROD_SIGNATURE 0x1 /* For MX31 */
#endif /* ifndef __MACH_MX35_H__ */
diff --git a/arch/arm/mach-imx/pcm037.h b/arch/arm/mach-imx/pcm037.h
deleted file mode 100644
index 470d3c887e14..000000000000
--- a/arch/arm/mach-imx/pcm037.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __PCM037_H__
-#define __PCM037_H__
-
-enum pcm037_board_variant {
- PCM037_PCM970,
- PCM037_EET,
-};
-
-extern enum pcm037_board_variant pcm037_variant(void);
-
-#ifdef CONFIG_MACH_PCM037_EET
-int pcm037_eet_init_devices(void);
-#else
-static inline int pcm037_eet_init_devices(void) { return 0; }
-#endif
-
-#endif
diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c
index d943535566c8..020e6deb67c8 100644
--- a/arch/arm/mach-imx/pm-imx27.c
+++ b/arch/arm/mach-imx/pm-imx27.c
@@ -7,6 +7,7 @@
* modify it under the terms of the GNU General Public License.
*/
+#include <linux/of_address.h>
#include <linux/kernel.h>
#include <linux/suspend.h>
#include <linux/io.h>
@@ -15,13 +16,20 @@
static int mx27_suspend_enter(suspend_state_t state)
{
+ void __iomem *ccm_base;
+ struct device_node *np;
u32 cscr;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx27-ccm");
+ ccm_base = of_iomap(np, 0);
+ BUG_ON(!ccm_base);
+
switch (state) {
case PM_SUSPEND_MEM:
/* Clear MPEN and SPEN to disable MPLL/SPLL */
- cscr = imx_readl(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
+ cscr = imx_readl(ccm_base);
cscr &= 0xFFFFFFFC;
- imx_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
+ imx_writel(cscr, ccm_base);
/* Executes WFI */
cpu_do_idle();
break;
diff --git a/arch/arm/mach-imx/ulpi.h b/arch/arm/mach-imx/ulpi.h
deleted file mode 100644
index b367902c9c32..000000000000
--- a/arch/arm/mach-imx/ulpi.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_ULPI_H
-#define __MACH_ULPI_H
-
-#include <linux/usb/ulpi.h>
-
-#ifdef CONFIG_USB_ULPI_VIEWPORT
-static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags)
-{
- return otg_ulpi_create(&ulpi_viewport_access_ops, flags);
-}
-#else
-static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags)
-{
- return NULL;
-}
-#endif
-
-#endif /* __MACH_ULPI_H */
-