Merge tag 'armsoc-for-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "Another week, another small batch of fixes.

  Most of these make zynq, socfpga and sunxi platforms work a bit
  better:

   - due to new requirements for regulators, DWMMC on socfpga broke past
     v3.17
   - SMP spinup fix for socfpga
   - a few DT fixes for zynq
   - another option (FIXED_REGULATOR) for sunxi is needed that used to
     be selected by other options but no longer is.
   - a couple of small DT fixes for at91
   - ...and a couple for i.MX"

* tag 'armsoc-for-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: imx28-evk: Let i2c0 run at 100kHz
  ARM: i.MX6: Fix "emi" clock name typo
  ARM: multi_v7_defconfig: enable CONFIG_MMC_DW_ROCKCHIP
  ARM: sunxi_defconfig: enable CONFIG_REGULATOR_FIXED_VOLTAGE
  ARM: dts: socfpga: Add a 3.3V fixed regulator node
  ARM: dts: socfpga: Fix SD card detect
  ARM: dts: socfpga: rename gpio nodes
  ARM: at91/dt: sam9263: fix PLLB frequencies
  power: reset: at91-reset: fix power down register
  MAINTAINERS: add atmel ssc driver maintainer entry
  arm: socfpga: fix fetching cpu1start_addr for SMP
  ARM: zynq: DT: trivial: Fix mc node
  ARM: zynq: DT: Add cadence watchdog node
  ARM: zynq: DT: Add missing reference for memory-controller
  ARM: zynq: DT: Add missing reference for ADC
  ARM: zynq: DT: Add missing address for L2 pl310
  ARM: zynq: DT: Remove 222 MHz OPP
  ARM: zynq: DT: Fix GEM register area size

4 files changed, 20 insertions, 15 deletions

diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h
index 572b8f719ffb..60c443dadb58 100644
--- a/arch/arm/mach-socfpga/core.h
+++ b/arch/arm/mach-socfpga/core.h
@@ -40,7 +40,7 @@ extern void __iomem *rst_manager_base_addr;
 extern struct smp_operations socfpga_smp_ops;
 extern char secondary_trampoline, secondary_trampoline_end;
 
-extern unsigned long cpu1start_addr;
+extern unsigned long socfpga_cpu1start_addr;
 
 #define SOCFPGA_SCU_VIRT_BASE   0xfffec000
 
diff --git a/arch/arm/mach-socfpga/headsmp.S b/arch/arm/mach-socfpga/headsmp.S
index 95c115d8b5ee..f65ea0af4af3 100644
--- a/arch/arm/mach-socfpga/headsmp.S
+++ b/arch/arm/mach-socfpga/headsmp.S
@@ -9,21 +9,26 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <asm/memory.h>
 
 	.arch	armv7-a
 
 ENTRY(secondary_trampoline)
-	movw	r2, #:lower16:cpu1start_addr
-	movt  r2, #:upper16:cpu1start_addr
-
-	/* The socfpga VT cannot handle a 0xC0000000 page offset when loading
-		the cpu1start_addr, we bit clear it. Tested on HW and VT. */
-	bic	r2, r2, #0x40000000
-
-	ldr	r0, [r2]
-	ldr	r1, [r0]
-	bx	r1
+	/* CPU1 will always fetch from 0x0 when it is brought out of reset.
+	 * Thus, we can just subtract the PAGE_OFFSET to get the physical
+	 * address of &cpu1start_addr. This would not work for platforms
+	 * where the physical memory does not start at 0x0.
+	 */
+	adr	r0, 1f
+	ldmia	r0, {r1, r2}
+	sub	r2, r2, #PAGE_OFFSET
+	ldr	r3, [r2]
+	ldr	r4, [r3]
+	bx	r4
 
+	.align
+1:	.long	.
+	.long	socfpga_cpu1start_addr
 ENTRY(secondary_trampoline_end)
 
 ENTRY(socfpga_secondary_startup)
diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c
index 5356a72bc8ce..16ca97b039f9 100644
--- a/arch/arm/mach-socfpga/platsmp.c
+++ b/arch/arm/mach-socfpga/platsmp.c
@@ -33,11 +33,11 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
 
-	if (cpu1start_addr) {
+	if (socfpga_cpu1start_addr) {
 		memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
 
 		__raw_writel(virt_to_phys(socfpga_secondary_startup),
-			(sys_manager_base_addr + (cpu1start_addr & 0x000000ff)));
+			(sys_manager_base_addr + (socfpga_cpu1start_addr & 0x000000ff)));
 
 		flush_cache_all();
 		smp_wmb();
diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
index adbf38314ca8..383d61e138af 100644
--- a/arch/arm/mach-socfpga/socfpga.c
+++ b/arch/arm/mach-socfpga/socfpga.c
@@ -29,7 +29,7 @@
 void __iomem *socfpga_scu_base_addr = ((void __iomem *)(SOCFPGA_SCU_VIRT_BASE));
 void __iomem *sys_manager_base_addr;
 void __iomem *rst_manager_base_addr;
-unsigned long cpu1start_addr;
+unsigned long socfpga_cpu1start_addr;
 
 static struct map_desc scu_io_desc __initdata = {
 	.virtual	= SOCFPGA_SCU_VIRT_BASE,
@@ -70,7 +70,7 @@ void __init socfpga_sysmgr_init(void)
 	np = of_find_compatible_node(NULL, NULL, "altr,sys-mgr");
 
 	if (of_property_read_u32(np, "cpu1-start-addr",
-			(u32 *) &cpu1start_addr))
+			(u32 *) &socfpga_cpu1start_addr))
 		pr_err("SMP: Need cpu1-start-addr in device tree.\n");
 
 	sys_manager_base_addr = of_iomap(np, 0);