Merge tag 'arm-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC DT updates from Arnd Bergmann:
 "As usual, there are many patches addressing minor issues in existing
  DTS files, such as DTC warnings, or adding support for additional
  peripherals.

  There are three added SoCs in existing product families:

   - Amazon:

     Alpine v3 is a 16-core Cortex-A72 SoC from Amazon's Annapurna Labs,
     otherwise known as AL73400 or first-generation Graviton, and
     following the already supported Cortex-A1`5 and Cortex-A57 based
     Alpine chips. This one is added together with the official
     Evaluation platform.

   - Qualcomm:

     The Snapdragon SDM630 platform is a family of mid-range mobile
     phone chips from 2017 based on Cortex-A53 or Kryo 260 CPUs. A total
     of five end-user products are added based on these, all Android
     phones from Sony: Xperia 10, 10 Plus, XA2, XA2 Plus and XA2 Ultra.

   - Renesas:

     RZ/G2H (r8a774e1) is currently the top model in the Renesas RZ/G
     family, and apparently closely related to the RZ/G2N and RZ/G2M
     models we already support but has a faster GPU and additional
     on-chip peripherals. It is added along with the HopeRun HiHope
     RZ/G2H development board

  A small number of new boards for already supported SoCs also debut:

   - Allwinner sunxi:

     Only one new machine, revision v1.2 of the Pine64 PinePhone
     (non-Android) smartphone, containing minor changes compared to
     earlier versions.

   - Amlogic Meson:

     WeTek Core2 is an Amlogic S912 (GXM) based Set-top-box

   - Aspeed:

     EthanolX is AMD's EPYC data center rerence platform, using an
     ASpeed AST2600 baseboard management controller.

   - Mediatek:

     Lenovo IdeaPad Duet 10.1" (kukui/krane) is a new Chromebook based
     on the MT8183 (Helio P60t) SoC.

   - Nvidia Tegra:

     ASUS Google Nexus 7 and Acer Iconia Tab A500 are two Android
     tablets from around 2012 using Tegra 3 and Tegra 2, respectively.
     Thanks to PostmarketOS, these can now run mainline kernels and
     become useful again.

     The Jetson Xavier NX Developer Kit uses a SoM and carrier board for
     the Tegra194, their latest 64-bit chip based on Carmel CPU cores
     and Volta graphics.

   - NXP i.MX:

     Five new boards based on the 32-bit i.MX6 series are added: The
     MYiR MYS-6ULX single-board computer, and four different models of
     industrial computers from Protonic.

   - Qualcomm:

     MikroTik RouterBoard 3011 is a rackmounted router based on the
     32-bit IPQ8064 networking SoC

     Three older phones get added, the Snapdragon 808 (msm8992) based
     Xiaomi Libra (Mi 4C) and Microsoft Lumia 950, originally running
     Windows Phone, and the Snapdragon 810 (msm8994) based Sony Xperia
     Z5.

   - Renesas:

     In addition to the HiHope RZ/G2H board mentioned above, we gain
     support for board versions 3.0 and 4.0 of the earlier RZ/G2M and
     RZ/G2N reference boards. Beacon EmbeddedWorks adds another
     SoM+Carrier development board for RZ/G2M.

   - Rockchips:

     Radxa Rock Pi N8 development board and the VMARC RK3288 SoM it is
     based on, using the high-end 32-bit rk3288 SoC.

  Notable updates to existing platforms are usually for added on-chip
  peripherals, including:

   - ASpeed AST2xxx (various)

   - Allwinner (cpufreq, thermal, Pinephone touchscreen)

   - Amlogic Meson (audio, gpu dvdfs, board updates)

   - Arm Versatile

   - Broadcom (board updates for switch ports, Raspberry pi clock updates)

   - Hisilicon (various)

   - Intel/Altera SoCFPGA (various)

   - Marvell Armada 7xxx/8xxx (smmu)

   - Marvell MMP (GPU on mmp2/mmp3)

   - Mediatek mt8183 (USB, pericfg)

   - NXP Layerscape (VPU, thermal, DSPI)

   - NXP i.MX (VPU, bindings, board updates)

   - Nvidia Tegra194 (GPU)

   - Qualcomm (GPU, Interconnect, ...)

   - Renesas R-Car (SPI, IPMMU, board updates)

   - STMicroelectronics STM32 (various)

   - Samsung Exynos (various)

   - Socionext Uniphier (updates to serial, and pcie)

   - TI K3 (serdes, usb3, audio, sd, chipid)

   - TI OMAP (IPU/DSP remoteproc changes, dropping platform data)"

* tag 'arm-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (605 commits)
  arm64: dts: meson: odroid-n2: add jack audio output support
  arm64: dts: meson: odroid-n2: enable audio loopback
  ARM: dts: berlin: Align L2 cache-controller nodename with dtschema
  arm64: dts: qcom: Add Microsoft Lumia 950 (Talkman) device tree
  arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree
  arm64: dts: qcom: msm8992: Add RPMCC node
  arm64: dts: qcom: msm8992: Add PSCI support.
  arm64: dts: qcom: msm8992: Add PMU node
  arm64: dts: qcom: msm8992: Add BLSP2_UART2 and I2C nodes
  arm64: dts: qcom: msm8992: Add SPMI PMIC arbiter device
  arm64: dts: qcom: msm8992: Add a SCM node
  arm64: dts: qcom: msm8992: Add a proper CPU map
  arm64: dts: qcom: bullhead: Move UART pinctrl to SoC
  arm64: dts: qcom: bullhead: Add qcom,msm-id
  arm64: dts: qcom: msm8992: Fix SDHCI1
  arm64: dts: qcom: msm8992: Modernize the DTS style
  arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW)
  arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead.
  arm64: dts: qcom: msm8994: Add support for SMD RPM
  arm64: dts: qcom: msm8992: Add a label to rpm-requests
  ...

1 files changed, 88 insertions, 36 deletions

diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 58100fb9cd8b..34d249d85da7 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -60,6 +60,9 @@
 		clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref";
 		resets = <&bpmp TEGRA186_RESET_EQOS>;
 		reset-names = "eqos";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_EQOSR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_EQOSW &emc>;
+		interconnect-names = "dma-mem", "write";
 		iommus = <&smmu TEGRA186_SID_EQOS>;
 		status = "disabled";
 
@@ -139,12 +142,13 @@
 		};
 	};
 
-	memory-controller@2c00000 {
+	mc: memory-controller@2c00000 {
 		compatible = "nvidia,tegra186-mc";
 		reg = <0x0 0x02c00000 0x0 0xb0000>;
 		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 
+		#interconnect-cells = <1>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 
@@ -163,6 +167,8 @@
 			clocks = <&bpmp TEGRA186_CLK_EMC>;
 			clock-names = "emc";
 
+			#interconnect-cells = <0>;
+
 			nvidia,bpmp = <&bpmp>;
 		};
 	};
@@ -327,7 +333,7 @@
 		status = "disabled";
 	};
 
-	sdmmc1: sdhci@3400000 {
+	sdmmc1: mmc@3400000 {
 		compatible = "nvidia,tegra186-sdhci";
 		reg = <0x0 0x03400000 0x0 0x10000>;
 		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
@@ -335,6 +341,9 @@
 		clock-names = "sdhci";
 		resets = <&bpmp TEGRA186_RESET_SDMMC1>;
 		reset-names = "sdhci";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRA &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_SDMMCWA &emc>;
+		interconnect-names = "dma-mem", "write";
 		iommus = <&smmu TEGRA186_SID_SDMMC1>;
 		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
 		pinctrl-0 = <&sdmmc1_3v3>;
@@ -353,7 +362,7 @@
 		status = "disabled";
 	};
 
-	sdmmc2: sdhci@3420000 {
+	sdmmc2: mmc@3420000 {
 		compatible = "nvidia,tegra186-sdhci";
 		reg = <0x0 0x03420000 0x0 0x10000>;
 		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
@@ -361,6 +370,9 @@
 		clock-names = "sdhci";
 		resets = <&bpmp TEGRA186_RESET_SDMMC2>;
 		reset-names = "sdhci";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRAA &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_SDMMCWAA &emc>;
+		interconnect-names = "dma-mem", "write";
 		iommus = <&smmu TEGRA186_SID_SDMMC2>;
 		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
 		pinctrl-0 = <&sdmmc2_3v3>;
@@ -374,7 +386,7 @@
 		status = "disabled";
 	};
 
-	sdmmc3: sdhci@3440000 {
+	sdmmc3: mmc@3440000 {
 		compatible = "nvidia,tegra186-sdhci";
 		reg = <0x0 0x03440000 0x0 0x10000>;
 		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
@@ -382,6 +394,9 @@
 		clock-names = "sdhci";
 		resets = <&bpmp TEGRA186_RESET_SDMMC3>;
 		reset-names = "sdhci";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_SDMMCW &emc>;
+		interconnect-names = "dma-mem", "write";
 		iommus = <&smmu TEGRA186_SID_SDMMC3>;
 		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
 		pinctrl-0 = <&sdmmc3_3v3>;
@@ -397,7 +412,7 @@
 		status = "disabled";
 	};
 
-	sdmmc4: sdhci@3460000 {
+	sdmmc4: mmc@3460000 {
 		compatible = "nvidia,tegra186-sdhci";
 		reg = <0x0 0x03460000 0x0 0x10000>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
@@ -408,6 +423,9 @@
 		assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLC4_VCO>;
 		resets = <&bpmp TEGRA186_RESET_SDMMC4>;
 		reset-names = "sdhci";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRAB &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_SDMMCWAB &emc>;
+		interconnect-names = "dma-mem", "write";
 		iommus = <&smmu TEGRA186_SID_SDMMC4>;
 		nvidia,pad-autocal-pull-up-offset-hs400 = <0x05>;
 		nvidia,pad-autocal-pull-down-offset-hs400 = <0x05>;
@@ -436,6 +454,9 @@
 			 <&bpmp TEGRA186_RESET_HDA2CODEC_2X>;
 		reset-names = "hda", "hda2hdmi", "hda2codec_2x";
 		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_HDAR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_HDAW &emc>;
+		interconnect-names = "dma-mem", "write";
 		iommus = <&smmu TEGRA186_SID_HDA>;
 		status = "disabled";
 	};
@@ -547,8 +568,7 @@
 		      <0x0 0x03538000 0x0 0x1000>;
 		reg-names = "hcd", "fpci";
 		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_XUSB_HOST>,
 			 <&bpmp TEGRA186_CLK_XUSB_FALCON>,
 			 <&bpmp TEGRA186_CLK_XUSB_SS>,
@@ -564,6 +584,9 @@
 		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_XUSBC>,
 				<&bpmp TEGRA186_POWER_DOMAIN_XUSBA>;
 		power-domain-names = "xusb_host", "xusb_ss";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_XUSB_HOSTR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_XUSB_HOSTW &emc>;
+		interconnect-names = "dma-mem", "write";
 		iommus = <&smmu TEGRA186_SID_XUSB_HOST>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -752,9 +775,9 @@
 		compatible = "nvidia,tegra186-pcie";
 		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_PCX>;
 		device_type = "pci";
-		reg = <0x0 0x10003000 0x0 0x00000800   /* PADS registers */
-		       0x0 0x10003800 0x0 0x00000800   /* AFI registers */
-		       0x0 0x40000000 0x0 0x10000000>; /* configuration space */
+		reg = <0x0 0x10003000 0x0 0x00000800>, /* PADS registers */
+		      <0x0 0x10003800 0x0 0x00000800>, /* AFI registers */
+		      <0x0 0x40000000 0x0 0x10000000>; /* configuration space */
 		reg-names = "pads", "afi", "cs";
 
 		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
@@ -769,22 +792,26 @@
 		#address-cells = <3>;
 		#size-cells = <2>;
 
-		ranges = <0x82000000 0 0x10000000 0x0 0x10000000 0 0x00001000   /* port 0 configuration space */
-			  0x82000000 0 0x10001000 0x0 0x10001000 0 0x00001000   /* port 1 configuration space */
-			  0x82000000 0 0x10004000 0x0 0x10004000 0 0x00001000   /* port 2 configuration space */
-			  0x81000000 0 0x0        0x0 0x50000000 0 0x00010000   /* downstream I/O (64 KiB) */
-			  0x82000000 0 0x50100000 0x0 0x50100000 0 0x07F00000   /* non-prefetchable memory (127 MiB) */
-			  0xc2000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */
+		ranges = <0x02000000 0 0x10000000 0x0 0x10000000 0 0x00001000>, /* port 0 configuration space */
+			 <0x02000000 0 0x10001000 0x0 0x10001000 0 0x00001000>,/* port 1 configuration space */
+			 <0x02000000 0 0x10004000 0x0 0x10004000 0 0x00001000>, /* port 2 configuration space */
+			 <0x01000000 0 0x0        0x0 0x50000000 0 0x00010000>, /* downstream I/O (64 KiB) */
+			 <0x02000000 0 0x50100000 0x0 0x50100000 0 0x07f00000>, /* non-prefetchable memory (127 MiB) */
+			 <0x42000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */
 
-		clocks = <&bpmp TEGRA186_CLK_AFI>,
-			 <&bpmp TEGRA186_CLK_PCIE>,
+		clocks = <&bpmp TEGRA186_CLK_PCIE>,
+			 <&bpmp TEGRA186_CLK_AFI>,
 			 <&bpmp TEGRA186_CLK_PLLE>;
-		clock-names = "afi", "pex", "pll_e";
+		clock-names = "pex", "afi", "pll_e";
 
-		resets = <&bpmp TEGRA186_RESET_AFI>,
-			 <&bpmp TEGRA186_RESET_PCIE>,
+		resets = <&bpmp TEGRA186_RESET_PCIE>,
+			 <&bpmp TEGRA186_RESET_AFI>,
 			 <&bpmp TEGRA186_RESET_PCIEXCLK>;
-		reset-names = "afi", "pex", "pcie_x";
+		reset-names = "pex", "afi", "pcie_x";
+
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_AFIR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_AFIW &emc>;
+		interconnect-names = "dma-mem", "write";
 
 		iommus = <&smmu TEGRA186_SID_AFI>;
 		iommu-map = <0x0 &smmu TEGRA186_SID_AFI 0x1000>;
@@ -906,12 +933,13 @@
 	};
 
 	host1x@13e00000 {
-		compatible = "nvidia,tegra186-host1x", "simple-bus";
+		compatible = "nvidia,tegra186-host1x";
 		reg = <0x0 0x13e00000 0x0 0x10000>,
 		      <0x0 0x13e10000 0x0 0x10000>;
 		reg-names = "hypervisor", "vm";
 		interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
 		             <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "syncpt", "host1x";
 		clocks = <&bpmp TEGRA186_CLK_HOST1X>;
 		clock-names = "host1x";
 		resets = <&bpmp TEGRA186_RESET_HOST1X>;
@@ -921,6 +949,10 @@
 		#size-cells = <1>;
 
 		ranges = <0x15000000 0x0 0x15000000 0x01000000>;
+
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_HOST1XDMAR &emc>;
+		interconnect-names = "dma-mem";
+
 		iommus = <&smmu TEGRA186_SID_HOST1X>;
 
 		dpaux1: dpaux@15040000 {
@@ -958,7 +990,7 @@
 		};
 
 		display-hub@15200000 {
-			compatible = "nvidia,tegra186-display", "simple-bus";
+			compatible = "nvidia,tegra186-display";
 			reg = <0x15200000 0x00040000>;
 			resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_MISC>,
 				 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP0>,
@@ -992,6 +1024,9 @@
 				reset-names = "dc";
 
 				power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+				interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+						<&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+				interconnect-names = "dma-mem", "read-1";
 				iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
 
 				nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
@@ -1008,6 +1043,9 @@
 				reset-names = "dc";
 
 				power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPB>;
+				interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+						<&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+				interconnect-names = "dma-mem", "read-1";
 				iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
 
 				nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
@@ -1024,6 +1062,9 @@
 				reset-names = "dc";
 
 				power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPC>;
+				interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+						<&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+				interconnect-names = "dma-mem", "read-1";
 				iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
 
 				nvidia,outputs = <&sor0 &sor1>;
@@ -1056,6 +1097,9 @@
 			reset-names = "vic";
 
 			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_VIC>;
+			interconnects = <&mc TEGRA186_MEMORY_CLIENT_VICSRD &emc>,
+					<&mc TEGRA186_MEMORY_CLIENT_VICSWR &emc>;
+			interconnect-names = "dma-mem", "write";
 			iommus = <&smmu TEGRA186_SID_VIC>;
 		};
 
@@ -1199,8 +1243,8 @@
 		compatible = "nvidia,gp10b";
 		reg = <0x0 0x17000000 0x0 0x1000000>,
 		      <0x0 0x18000000 0x0 0x1000000>;
-		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "stall", "nonstall";
 
 		clocks = <&bpmp TEGRA186_CLK_GPCCLK>,
@@ -1211,25 +1255,28 @@
 		status = "disabled";
 
 		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_GPU>;
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_GPUSRD &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_GPUSWR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_GPUSRD2 &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_GPUSWR2 &emc>;
+		interconnect-names = "dma-mem", "write-0", "read-1", "write-1";
 	};
 
-	sysram@30000000 {
+	sram@30000000 {
 		compatible = "nvidia,tegra186-sysram", "mmio-sram";
 		reg = <0x0 0x30000000 0x0 0x50000>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges = <0 0x0 0x0 0x30000000 0x0 0x50000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x30000000 0x50000>;
 
-		cpu_bpmp_tx: shmem@4e000 {
-			compatible = "nvidia,tegra186-bpmp-shmem";
-			reg = <0x0 0x4e000 0x0 0x1000>;
+		cpu_bpmp_tx: sram@4e000 {
+			reg = <0x4e000 0x1000>;
 			label = "cpu-bpmp-tx";
 			pool;
 		};
 
-		cpu_bpmp_rx: shmem@4f000 {
-			compatible = "nvidia,tegra186-bpmp-shmem";
-			reg = <0x0 0x4f000 0x0 0x1000>;
+		cpu_bpmp_rx: sram@4f000 {
+			reg = <0x4f000 0x1000>;
 			label = "cpu-bpmp-rx";
 			pool;
 		};
@@ -1237,6 +1284,11 @@
 
 	bpmp: bpmp {
 		compatible = "nvidia,tegra186-bpmp";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_BPMPR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_BPMPW &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_BPMPDMAR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_BPMPDMAW &emc>;
+		interconnect-names = "read", "write", "dma-mem", "dma-write";
 		iommus = <&smmu TEGRA186_SID_BPMP>;
 		mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB
 				    TEGRA_HSP_DB_MASTER_BPMP>;