diff options
author | Arnd Bergmann <arnd@arndb.de> | 2024-03-01 15:37:49 +0300 |
---|---|---|
committer | Arnd Bergmann <arnd@arndb.de> | 2024-03-01 15:37:57 +0300 |
commit | 06d179e31ce8651bd04822cd174cf342a21f30e9 (patch) | |
tree | bcf8e79867b7aaed2ec7a77953bee1e6a912d49b /arch/arm64/boot/dts | |
parent | a634daed69171b2f959a63291d48beadbafc4a4f (diff) | |
parent | da96424168aa85be683f418414cbfa8b35283186 (diff) | |
download | linux-06d179e31ce8651bd04822cd174cf342a21f30e9.tar.xz |
Merge tag 'imx-dt64-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree for 6.9:
- New board support: Apalis eval v1.2 carrier board, Variscite
VAR-SOM-MX93, phyBOARD-Segin-i.MX93.
- A series from Adam Ford to enable bluetooth, configure multiple queues
on eqos, remove unnecessary clock configuration for i.MX8 Beacon boards.
- Several changesets from Alexander Stein to add i.MX8DXP support, enable
audio and GPU for i.MX8QXP, re-parent MEDIA_MIPI_PHY1_REF clock for
i.MX8MP, and improve MBA8xx board description.
- A few dt-schema fixes from Fabio Estevam for i.MX8MM and i.MX93 devices.
- A bunch of changes from Frank Li to improve i.MX8QM and i.MX8DXL
support, correcting edma3 power-domains and interrupt numbers, adding
I2C, FlexCAN and SMMU devices, etc.
- A series from Frieder Schrempf to improve imx8mm-kontron board
descriptions, disabling pulls, fixing up RTC device, adding EEPROM,
and refactoring OSM-S module, etc.
- A set of Data Modul i.MX8M Plus eDM SBC improvements from Marek Vasut.
- A series from Shengjiu Wang to add PDM micphone and SPDIF sound card
support for imx8mm-evk board.
- A series of imx8mm-venice boards improvement from Tim Harvey to add
TPM device, fix USB OTG VBUS etc.
- Other small and random improvements on various boards.
* tag 'imx-dt64-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (77 commits)
arm64: dts: imx8mm-kontron-bl-osm-s: Fix Ethernet PHY compatible
arm64: dts: imx8-apalis-v1.1: Remove reset-names from ethernet-phy
arm64: dts: imx8mp-evk: Fix hdmi@3d node
arm64: dts: imx93-var-som: Remove phy-supply from eqos
arm64: dts: imx8mp-phyboard-pollux: Disable pull-up for CD GPIO
arm64: dts: imx8mp-phyboard-pollux: Reduce drive strength for eqos tx lines
arm64: dts: imx8mp-phyboard-pollux: Set debug uart muxing to 0x140
arm64: dts: imx8mp-phyboard-pollux: Add and update rtc devicetree node
arm64: dts: imx8mm-evk: Add spdif sound card support
arm64: dts: mba8xx: Add missing #interrupt-cells
arm64: dts: imx8mp: Set SPI NOR to max 40 MHz on Data Modul i.MX8M Plus eDM SBC
arm64: dts: imx8mn: tqma8mqnl-mba8mx: Add USB DR overlay
arm64: dts: imx8mq: tqma8mq-mba8mx: Add missing USB vbus supply
arm64: dts: freescale: imx8mm/imx8mq: mba8mx: Use PCIe clock generator
arm64: dts: imx8mn-beacon: Remove unnecessary clock configuration
arm64: dts: imx8mn: Slow default video_pll clock rate
arm64: dts: imx8mp-beacon: Configure multiple queues on eqos
arm64: dts: imx8mp-beacon: Enable Bluetooth
arm64: dts: freescale: minor whitespace cleanup
arm64: dts: lx2160a: Fix DTS for full PL011 UART
...
Link: https://lore.kernel.org/r/20240226034147.233993-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch/arm64/boot/dts')
62 files changed, 3748 insertions, 404 deletions
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 2cb0212b63c6..045250d0a040 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -99,6 +99,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-8-x.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-7-x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8dxp-tqma8xdp-mba8xx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb @@ -152,7 +153,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb imx8mn-tqma8mqnl-mba8mx-lvds-tm070jvhg33-dtbs += imx8mn-tqma8mqnl-mba8mx.dtb imx8mn-tqma8mqnl-mba8mx-lvds-tm070jvhg33.dtbo +imx8mn-tqma8mqnl-mba8mx-usbotg-dtbs += imx8mn-tqma8mqnl-mba8mx.dtb imx8mn-tqma8mqnl-mba8mx-usbotg.dtbo dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx-lvds-tm070jvhg33.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx-usbotg.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-data-modul-edm-sbc.dtb @@ -207,8 +210,10 @@ imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33-dtbs += imx8mq-tqma8mq-mba8mx.dtb imx8mq- dtb-$(CONFIG_ARCH_MXC) += imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-eval.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-eval-v1.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-ixora-v1.1.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-eval.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-eval-v1.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-ixora-v1.1.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-ixora-v1.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb @@ -218,10 +223,13 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris-v2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqp-mba8xx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb +dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb imx8mm-venice-gw72xx-0x-imx219-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo imx8mm-venice-gw72xx-0x-rpidsi-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtbo diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index 1e3fe3897b52..fe9093b3c02e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -290,7 +290,7 @@ dcfg: dcfg@1ee0000 { compatible = "fsl,ls1012a-dcfg", "syscon"; - reg = <0x0 0x1ee0000 0x0 0x10000>; + reg = <0x0 0x1ee0000 0x0 0x1000>; big-endian; }; @@ -351,24 +351,26 @@ }; i2c0: i2c@2180000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,ls1012a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2180000 0x0 0x10000>; interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>; + scl-gpios = <&gpio0 2 0>; status = "disabled"; }; i2c1: i2c@2190000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,ls1012a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2190000 0x0 0x10000>; interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>; + scl-gpios = <&gpio0 13 0>; status = "disabled"; }; @@ -499,6 +501,7 @@ snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + snps,host-vbus-glitches; }; sata: sata@3200000 { @@ -550,6 +553,7 @@ <0000 0 0 2 &gic 0 111 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 3 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; + big-endian; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 1515cec23147..754a64be739c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -485,7 +485,6 @@ <0x00030005 0x00000042>, <0x00030006 0x0000004c>, <0x00030007 0x00000056>; - big-endian; #thermal-sensor-cells = <1>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 8616d5e0c388..604bf88d70b3 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -591,6 +591,8 @@ reg = <0x00 0x03400000 0x0 0x00100000>, <0x20 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */ + interrupt-names = "pme"; num-ib-windows = <24>; num-ob-windows = <256>; max-functions = /bits/ 8 <2>; @@ -628,6 +630,8 @@ reg = <0x00 0x03500000 0x0 0x00100000>, <0x28 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */ + interrupt-names = "pme"; num-ib-windows = <6>; num-ob-windows = <6>; status = "disabled"; @@ -664,6 +668,8 @@ reg = <0x00 0x03600000 0x0 0x00100000>, <0x30 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */ + interrupt-names = "pme"; num-ib-windows = <6>; num-ob-windows = <6>; status = "disabled"; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index 6640b49670ae..e665c629e1a1 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -949,34 +949,50 @@ }; uart0: serial@21c0000 { - compatible = "arm,sbsa-uart","arm,pl011"; + compatible = "arm,pl011", "arm,primecell"; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>; + clock-names = "uartclk", "apb_pclk"; reg = <0x0 0x21c0000 0x0 0x1000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - current-speed = <115200>; status = "disabled"; }; uart1: serial@21d0000 { - compatible = "arm,sbsa-uart","arm,pl011"; + compatible = "arm,pl011", "arm,primecell"; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>; + clock-names = "uartclk", "apb_pclk"; reg = <0x0 0x21d0000 0x0 0x1000>; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - current-speed = <115200>; status = "disabled"; }; uart2: serial@21e0000 { - compatible = "arm,sbsa-uart","arm,pl011"; + compatible = "arm,pl011", "arm,primecell"; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>; + clock-names = "uartclk", "apb_pclk"; reg = <0x0 0x21e0000 0x0 0x1000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; - current-speed = <115200>; status = "disabled"; }; uart3: serial@21f0000 { - compatible = "arm,sbsa-uart","arm,pl011"; + compatible = "arm,pl011", "arm,primecell"; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>; + clock-names = "uartclk", "apb_pclk"; reg = <0x0 0x21f0000 0x0 0x1000>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - current-speed = <115200>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-eval-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-eval-v1.1.dtsi new file mode 100644 index 000000000000..0f77f78f4d96 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-apalis-eval-v1.1.dtsi @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2024 Toradex + */ + +#include "imx8-apalis-eval.dtsi" + +/* Apalis CAN1 */ +&flexcan1 { + status = "okay"; +}; + +/* Apalis CAN2 */ +&flexcan2 { + status = "okay"; +}; + +/* Apalis MMC1 */ +&usdhc2 { + status = "okay"; +}; + +/* Apalis SD1 */ +&usdhc3 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-eval-v1.2.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-eval-v1.2.dtsi new file mode 100644 index 000000000000..f5c6a0164f36 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-apalis-eval-v1.2.dtsi @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2024 Toradex + */ + +#include "imx8-apalis-eval.dtsi" + +/ { + reg_3v3_mmc: regulator-3v3-mmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_3v3_mmc>; + enable-active-high; + gpio = <&lsio_gpio5 19 GPIO_ACTIVE_HIGH>; + off-on-delay-us = <100000>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3.3V_MMC"; + startup-delay-us = <10000>; + }; + + reg_3v3_sd: regulator-3v3-sd { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_3v3_sd>; + enable-active-high; + gpio = <&lsio_gpio5 20 GPIO_ACTIVE_HIGH>; + off-on-delay-us = <100000>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3.3V_SD"; + startup-delay-us = <10000>; + }; + + reg_can1: regulator-can1 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_can1_power>; + enable-active-high; + gpio = <&lsio_gpio5 22 GPIO_ACTIVE_HIGH>; + regulator-name = "5V_SW_CAN1"; + startup-delay-us = <10000>; + }; + + reg_can2: regulator-can2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_can2_power>; + enable-active-high; + gpio = <&lsio_gpio5 21 GPIO_ACTIVE_HIGH>; + regulator-name = "5V_SW_CAN2"; + startup-delay-us = <10000>; + }; +}; + +/* Apalis CAN1 */ +&flexcan1 { + xceiver-supply = <®_can1>; + status = "okay"; +}; + +/* Apalis CAN2 */ +&flexcan2 { + xceiver-supply = <®_can2>; + status = "okay"; +}; + +/* Apalis I2C1 */ +&i2c2 { + status = "okay"; + + /* Power/Current Measurement Sensor */ + hwmon@40 { + compatible = "ti,ina219"; + reg = <0x40>; + shunt-resistor = <5000>; + }; + + temperature-sensor@4f { + compatible = "ti,tmp75c"; + reg = <0x4f>; + }; + + eeprom@57 { + compatible = "st,24c02", "atmel,24c02"; + reg = <0x57>; + }; +}; + +/* Apalis MMC1 */ +&usdhc2 { + pinctrl-0 = <&pinctrl_usdhc2_4bit>, <&pinctrl_mmc1_cd>; + pinctrl-1 = <&pinctrl_usdhc2_4bit_100mhz>, <&pinctrl_mmc1_cd>; + pinctrl-2 = <&pinctrl_usdhc2_4bit_200mhz>, <&pinctrl_mmc1_cd>; + pinctrl-3 = <&pinctrl_usdhc2_4bit_sleep>, <&pinctrl_mmc1_cd_sleep>; + bus-width = <4>; + vmmc-supply = <®_3v3_mmc>; + status = "okay"; +}; + +/* Apalis SD1 */ +&usdhc3 { + vmmc-supply = <®_3v3_sd>; + status = "okay"; +}; + +&iomuxc { + + pinctrl_enable_3v3_mmc: enable3v3mmcgrp { + fsl,pins = <IMX8QM_USDHC1_DATA4_LSIO_GPIO5_IO19 0x00000021>; /* MXM3_148 */ + }; + + pinctrl_enable_3v3_sd: enable3v3sdgrp { + fsl,pins = <IMX8QM_USDHC1_DATA5_LSIO_GPIO5_IO20 0x00000021>; /* MXM3_152 */ + }; + + pinctrl_enable_can1_power: enablecan1powergrp { + fsl,pins = <IMX8QM_USDHC1_DATA7_LSIO_GPIO5_IO22 0x00000021>; /* MXM3_158 */ + }; + + pinctrl_enable_can2_power: enablecan2powergrp { + fsl,pins = <IMX8QM_USDHC1_DATA6_LSIO_GPIO5_IO21 0x00000021>; /* MXM3_156 */ + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi index 685d4294f4f1..deecb96a1596 100644 --- a/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi @@ -35,18 +35,6 @@ status = "okay"; }; -/* Apalis CAN1 */ -&flexcan1 { - status = "okay"; -}; - -/* Apalis CAN2 */ -&flexcan2 { - status = "okay"; -}; - -/* TODO: GPU */ - /* Apalis I2C1 */ &i2c2 { status = "okay"; @@ -132,13 +120,3 @@ }; /* TODO: Apalis USBH4 SuperSpeed */ - -/* Apalis MMC1 */ -&usdhc2 { - status = "okay"; -}; - -/* Apalis SD1 */ -&usdhc3 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi index f69b0c17560a..160153853b68 100644 --- a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi @@ -261,7 +261,6 @@ reset-assert-us = <2>; reset-deassert-us = <2>; reset-gpios = <&lsio_gpio1 11 GPIO_ACTIVE_LOW>; - reset-names = "phy"; }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi index f057c6b21b30..07afeb78ed56 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi @@ -4,6 +4,7 @@ * Dong Aisheng <aisheng.dong@nxp.com> */ +#include <dt-bindings/clock/imx8-clock.h> #include <dt-bindings/clock/imx8-lpcg.h> #include <dt-bindings/firmware/imx/rsrc.h> @@ -14,12 +15,174 @@ audio_ipg_clk: clock-audio-ipg { clock-output-names = "audio_ipg_clk"; }; +clk_ext_aud_mclk0: clock-ext-aud-mclk0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ext_aud_mclk0"; +}; + +clk_ext_aud_mclk1: clock-ext-aud-mclk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ext_aud_mclk1"; +}; + +clk_esai0_rx_clk: clock-esai0-rx { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "esai0_rx_clk"; +}; + +clk_esai0_rx_hf_clk: clock-esai0-rx-hf { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "esai0_rx_hf_clk"; +}; + +clk_esai0_tx_clk: clock-esai0-tx { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "esai0_tx_clk"; +}; + +clk_esai0_tx_hf_clk: clock-esai0-tx-hf { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "esai0_tx_hf_clk"; +}; + +clk_spdif0_rx: clock-spdif0-rx { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "spdif0_rx"; +}; + +clk_sai0_rx_bclk: clock-sai0-rx-bclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "sai0_rx_bclk"; +}; + +clk_sai0_tx_bclk: clock-sai0-tx-bclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "sai0_tx_bclk"; +}; + +clk_sai1_rx_bclk: clock-sai1-rx-bclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "sai1_rx_bclk"; +}; + +clk_sai1_tx_bclk: clock-sai1-tx-bclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "sai1_tx_bclk"; +}; + +clk_sai2_rx_bclk: clock-sai2-rx-bclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "sai2_rx_bclk"; +}; + +clk_sai3_rx_bclk: clock-sai3-rx-bclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "sai3_rx_bclk"; +}; + +clk_sai4_rx_bclk: clock-sai4-rx-bclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "sai4_rx_bclk"; +}; + audio_subsys: bus@59000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x59000000 0x0 0x59000000 0x1000000>; + sai0: sai@59040000 { + compatible = "fsl,imx8qm-sai"; + reg = <0x59040000 0x10000>; + interrupts = <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sai0_lpcg 1>, + <&clk_dummy>, + <&sai0_lpcg 0>, + <&clk_dummy>, + <&clk_dummy>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&edma0 12 0 1>, <&edma0 13 0 0>; + power-domains = <&pd IMX_SC_R_SAI_0>; + status = "disabled"; + }; + + sai1: sai@59050000 { + compatible = "fsl,imx8qm-sai"; + reg = <0x59050000 0x10000>; + interrupts = <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sai1_lpcg 1>, + <&clk_dummy>, + <&sai1_lpcg 0>, + <&clk_dummy>, + <&clk_dummy>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&edma0 14 0 1>, <&edma0 15 0 0>; + power-domains = <&pd IMX_SC_R_SAI_1>; + status = "disabled"; + }; + + sai2: sai@59060000 { + compatible = "fsl,imx8qm-sai"; + reg = <0x59060000 0x10000>; + interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sai2_lpcg 1>, + <&clk_dummy>, + <&sai2_lpcg 0>, + <&clk_dummy>, + <&clk_dummy>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dma-names = "rx"; + dmas = <&edma0 16 0 1>; + power-domains = <&pd IMX_SC_R_SAI_2>; + status = "disabled"; + }; + + sai3: sai@59070000 { + compatible = "fsl,imx8qm-sai"; + reg = <0x59070000 0x10000>; + interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sai3_lpcg 1>, + <&clk_dummy>, + <&sai3_lpcg 0>, + <&clk_dummy>, + <&clk_dummy>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dma-names = "rx"; + dmas = <&edma0 17 0 1>; + power-domains = <&pd IMX_SC_R_SAI_3>; + status = "disabled"; + }; + edma0: dma-controller@591f0000 { compatible = "fsl,imx8qm-edma"; reg = <0x591f0000 0x190000>; @@ -76,6 +239,54 @@ audio_subsys: bus@59000000 { <&pd IMX_SC_R_DMA_0_CH23>; }; + sai0_lpcg: clock-controller@59440000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59440000 0x10000>; + #clock-cells = <1>; + clocks = <&acm IMX_ADMA_ACM_SAI0_MCLK_SEL>, + <&audio_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "sai0_lpcg_mclk", + "sai0_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_SAI_0>; + }; + + sai1_lpcg: clock-controller@59450000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59450000 0x10000>; + #clock-cells = <1>; + clocks = <&acm IMX_ADMA_ACM_SAI1_MCLK_SEL>, + <&audio_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "sai1_lpcg_mclk", + "sai1_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_SAI_1>; + }; + + sai2_lpcg: clock-controller@59460000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59460000 0x10000>; + #clock-cells = <1>; + clocks = <&acm IMX_ADMA_ACM_SAI2_MCLK_SEL>, + <&audio_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "sai2_lpcg_mclk", + "sai2_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_SAI_2>; + }; + + sai3_lpcg: clock-controller@59470000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59470000 0x10000>; + #clock-cells = <1>; + clocks = <&acm IMX_ADMA_ACM_SAI3_MCLK_SEL>, + <&audio_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "sai3_lpcg_mclk", + "sai3_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_SAI_3>; + }; + dsp_lpcg: clock-controller@59580000 { compatible = "fsl,imx8qxp-lpcg"; reg = <0x59580000 0x10000>; @@ -151,4 +362,123 @@ audio_subsys: bus@59000000 { <&pd IMX_SC_R_DMA_1_CH9>, <&pd IMX_SC_R_DMA_1_CH10>; }; + + aud_rec0_lpcg: clock-controller@59d00000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59d00000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "aud_rec_clk0_lpcg_clk"; + power-domains = <&pd IMX_SC_R_AUDIO_PLL_0>; + }; + + aud_rec1_lpcg: clock-controller@59d10000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59d10000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_MST_BUS>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "aud_rec_clk1_lpcg_clk"; + power-domains = <&pd IMX_SC_R_AUDIO_PLL_1>; + }; + + aud_pll_div0_lpcg: clock-controller@59d20000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59d20000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "aud_pll_div_clk0_lpcg_clk"; + power-domains = <&pd IMX_SC_R_AUDIO_PLL_0>; + }; + + aud_pll_div1_lpcg: clock-controller@59d30000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59d30000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_SLV_BUS>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "aud_pll_div_clk1_lpcg_clk"; + power-domains = <&pd IMX_SC_R_AUDIO_PLL_1>; + }; + + mclkout0_lpcg: clock-controller@59d50000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59d50000 0x10000>; + #clock-cells = <1>; + clocks = <&acm IMX_ADMA_ACM_MCLKOUT0_SEL>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "mclkout0_lpcg_clk"; + power-domains = <&pd IMX_SC_R_MCLK_OUT_0>; + }; + + mclkout1_lpcg: clock-controller@59d60000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59d60000 0x10000>; + #clock-cells = <1>; + clocks = <&acm IMX_ADMA_ACM_MCLKOUT1_SEL>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "mclkout1_lpcg_clk"; + power-domains = <&pd IMX_SC_R_MCLK_OUT_1>; + }; + + acm: acm@59e00000 { + compatible = "fsl,imx8qxp-acm"; + reg = <0x59e00000 0x1d0000>; + #clock-cells = <1>; + power-domains = <&pd IMX_SC_R_AUDIO_CLK_0>, + <&pd IMX_SC_R_AUDIO_CLK_1>, + <&pd IMX_SC_R_MCLK_OUT_0>, + <&pd IMX_SC_R_MCLK_OUT_1>, + <&pd IMX_SC_R_AUDIO_PLL_0>, + <&pd IMX_SC_R_AUDIO_PLL_1>, + <&pd IMX_SC_R_ASRC_0>, + <&pd IMX_SC_R_ASRC_1>, + <&pd IMX_SC_R_ESAI_0>, + <&pd IMX_SC_R_SAI_0>, + <&pd IMX_SC_R_SAI_1>, + <&pd IMX_SC_R_SAI_2>, + <&pd IMX_SC_R_SAI_3>, + <&pd IMX_SC_R_SAI_4>, + <&pd IMX_SC_R_SAI_5>, + <&pd IMX_SC_R_SPDIF_0>, + <&pd IMX_SC_R_MQS_0>; + clocks = <&aud_rec0_lpcg IMX_LPCG_CLK_0>, + <&aud_rec1_lpcg IMX_LPCG_CLK_0>, + <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>, + <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>, + <&clk_ext_aud_mclk0>, + <&clk_ext_aud_mclk1>, + <&clk_esai0_rx_clk>, + <&clk_esai0_rx_hf_clk>, + <&clk_esai0_tx_clk>, + <&clk_esai0_tx_hf_clk>, + <&clk_spdif0_rx>, + <&clk_sai0_rx_bclk>, + <&clk_sai0_tx_bclk>, + <&clk_sai1_rx_bclk>, + <&clk_sai1_tx_bclk>, + <&clk_sai2_rx_bclk>, + <&clk_sai3_rx_bclk>, + <&clk_sai4_rx_bclk>; + clock-names = "aud_rec_clk0_lpcg_clk", + "aud_rec_clk1_lpcg_clk", + "aud_pll_div_clk0_lpcg_clk", + "aud_pll_div_clk1_lpcg_clk", + "ext_aud_mclk0", + "ext_aud_mclk1", + "esai0_rx_clk", + "esai0_rx_hf_clk", + "esai0_tx_clk", + "esai0_tx_hf_clk", + "spdif0_rx", + "sai0_rx_bclk", + "sai0_tx_bclk", + "sai1_rx_bclk", + "sai1_tx_bclk", + "sai2_rx_bclk", + "sai3_rx_bclk", + "sai4_rx_bclk"; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi index b0bb77150adc..cab3468b1875 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi @@ -5,6 +5,7 @@ */ #include <dt-bindings/clock/imx8-lpcg.h> +#include <dt-bindings/dma/fsl-edma.h> #include <dt-bindings/firmware/imx/rsrc.h> dma_ipg_clk: clock-dma-ipg { @@ -93,8 +94,8 @@ dma_subsys: bus@5a000000 { assigned-clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <80000000>; power-domains = <&pd IMX_SC_R_UART_0>; - dma-names = "tx","rx"; - dmas = <&edma2 9 0 0>, <&edma2 8 0 1>; + dma-names = "rx", "tx"; + dmas = <&edma2 8 0 FSL_EDMA_RX>, <&edma2 9 0 0>; status = "disabled"; }; @@ -107,8 +108,8 @@ dma_subsys: bus@5a000000 { assigned-clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <80000000>; power-domains = <&pd IMX_SC_R_UART_1>; - dma-names = "tx","rx"; - dmas = <&edma2 11 0 0>, <&edma2 10 0 1>; + dma-names = "rx", "tx"; + dmas = <&edma2 10 0 FSL_EDMA_RX>, <&edma2 11 0 0>; status = "disabled"; }; @@ -121,8 +122,8 @@ dma_subsys: bus@5a000000 { assigned-clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <80000000>; power-domains = <&pd IMX_SC_R_UART_2>; - dma-names = "tx","rx"; - dmas = <&edma2 13 0 0>, <&edma2 12 0 1>; + dma-names = "rx", "tx"; + dmas = <&edma2 12 0 FSL_EDMA_RX>, <&edma2 13 0 0>; status = "disabled"; }; @@ -135,8 +136,8 @@ dma_subsys: bus@5a000000 { assigned-clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <80000000>; power-domains = <&pd IMX_SC_R_UART_3>; - dma-names = "tx","rx"; - dmas = <&edma2 15 0 0>, <&edma2 14 0 1>; + dma-names = "rx", "tx"; + dmas = <&edma2 14 0 FSL_EDMA_RX>, <&edma2 15 0 0>; status = "disabled"; }; @@ -192,29 +193,6 @@ dma_subsys: bus@5a000000 { <&pd IMX_SC_R_DMA_2_CH15>; }; - edma3: dma-controller@5a9f0000 { - compatible = "fsl,imx8qm-edma"; - reg = <0x5a9f0000 0x90000>; - #dma-cells = <3>; - dma-channels = <8>; - interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&pd IMX_SC_R_DMA_3_CH0>, - <&pd IMX_SC_R_DMA_3_CH1>, - <&pd IMX_SC_R_DMA_3_CH2>, - <&pd IMX_SC_R_DMA_3_CH3>, - <&pd IMX_SC_R_DMA_3_CH4>, - <&pd IMX_SC_R_DMA_3_CH5>, - <&pd IMX_SC_R_DMA_3_CH6>, - <&pd IMX_SC_R_DMA_3_CH7>; - }; - spi0_lpcg: clock-controller@5a400000 { compatible = "fsl,imx8qxp-lpcg"; reg = <0x5a400000 0x10000>; @@ -460,6 +438,29 @@ dma_subsys: bus@5a000000 { status = "disabled"; }; + edma3: dma-controller@5a9f0000 { + compatible = "fsl,imx8qm-edma"; + reg = <0x5a9f0000 0x90000>; + #dma-cells = <3>; + dma-channels = <8>; + interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd IMX_SC_R_DMA_3_CH0>, + <&pd IMX_SC_R_DMA_3_CH1>, + <&pd IMX_SC_R_DMA_3_CH2>, + <&pd IMX_SC_R_DMA_3_CH3>, + <&pd IMX_SC_R_DMA_3_CH4>, + <&pd IMX_SC_R_DMA_3_CH5>, + <&pd IMX_SC_R_DMA_3_CH6>, + <&pd IMX_SC_R_DMA_3_CH7>; + }; + i2c0_lpcg: clock-controller@5ac00000 { compatible = "fsl,imx8qxp-lpcg"; reg = <0x5ac00000 0x10000>; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-gpu0.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-gpu0.dtsi new file mode 100644 index 000000000000..9b8a44aa63d6 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-ss-gpu0.dtsi @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +#include <dt-bindings/firmware/imx/rsrc.h> + +gpu0_subsys: bus@53000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x53000000 0x0 0x53000000 0x1000000>; + + gpu_3d0: gpu@53100000 { + compatible = "vivante,gc"; + reg = <0x53100000 0x40000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX_SC_R_GPU_0_PID0 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_GPU_0_PID0 IMX_SC_PM_CLK_MISC>; + clock-names = "core", "shader"; + assigned-clocks = <&clk IMX_SC_R_GPU_0_PID0 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_GPU_0_PID0 IMX_SC_PM_CLK_MISC>; + assigned-clock-rates = <700000000>, <850000000>; + power-domains = <&pd IMX_SC_R_GPU_0_PID0>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts index b972658efb17..2123d431e061 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts @@ -81,6 +81,24 @@ status = "disabled"; }; + reg_can0_stby: regulator-4 { + compatible = "regulator-fixed"; + regulator-name = "can0-stby"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca6416_3 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_can1_stby: regulator-5 { + compatible = "regulator-fixed"; + regulator-name = "can1-stby"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca6416_3 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_usdhc2_vmmc: regulator-3 { compatible = "regulator-fixed"; regulator-name = "SD1_SPWR"; @@ -261,12 +279,81 @@ }; }; +&i2c3 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + pca6416_3: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&lsio_gpio2>; + interrupts = <5 IRQ_TYPE_EDGE_RISING>; + }; + + pca9548_2: i2c-mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + }; + }; +}; + &lpuart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart0>; status = "okay"; }; +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can0_stby>; + status = "okay"; +}; + +&flexcan3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan3>; + xceiver-supply = <®_can1_stby>; + status = "okay"; +}; + &lsio_gpio4 { status = "okay"; }; @@ -436,6 +523,20 @@ >; }; + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + IMX8DXL_UART2_TX_ADMA_FLEXCAN1_TX 0x00000021 + IMX8DXL_UART2_RX_ADMA_FLEXCAN1_RX 0x00000021 + >; + }; + + pinctrl_flexcan3: flexcan3grp { + fsl,pins = < + IMX8DXL_FLEXCAN2_TX_ADMA_FLEXCAN2_TX 0x00000021 + IMX8DXL_FLEXCAN2_RX_ADMA_FLEXCAN2_RX 0x00000021 + >; + }; + pinctrl_fec1: fec1grp { fsl,pins = < IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD 0x000014a0 diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi index 0a477f6318f1..5d012c95222f 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi @@ -15,6 +15,63 @@ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; }; +&edma0 { + reg = <0x591f0000 0x1a0000>; + #dma-cells = <3>; + dma-channels = <25>; + dma-channel-mask = <0x1c0cc0>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, /* asrc 0 */ + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, /* spdif0 */ + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, /* sai0 */ + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, /* sai1 */ + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, /* sai2 */ + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, /* sai3 */ + <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, /* gpt0 */ + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, /* gpt1 */ + <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>, /* gpt2 */ + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>; /* gpt3 */ + power-domains = <&pd IMX_SC_R_DMA_0_CH0>, + <&pd IMX_SC_R_DMA_0_CH1>, + <&pd IMX_SC_R_DMA_0_CH2>, + <&pd IMX_SC_R_DMA_0_CH3>, + <&pd IMX_SC_R_DMA_0_CH4>, + <&pd IMX_SC_R_DMA_0_CH5>, + <&pd IMX_SC_R_DMA_0_CH6>, + <&pd IMX_SC_R_DMA_0_CH7>, + <&pd IMX_SC_R_DMA_0_CH8>, + <&pd IMX_SC_R_DMA_0_CH9>, + <&pd IMX_SC_R_DMA_0_CH10>, + <&pd IMX_SC_R_DMA_0_CH11>, + <&pd IMX_SC_R_DMA_0_CH12>, + <&pd IMX_SC_R_DMA_0_CH13>, + <&pd IMX_SC_R_DMA_0_CH14>, + <&pd IMX_SC_R_DMA_0_CH15>, + <&pd IMX_SC_R_DMA_0_CH16>, + <&pd IMX_SC_R_DMA_0_CH17>, + <&pd IMX_SC_R_DMA_0_CH18>, + <&pd IMX_SC_R_DMA_0_CH19>, + <&pd IMX_SC_R_DMA_0_CH20>, + <&pd IMX_SC_R_DMA_0_CH21>, + <&pd IMX_SC_R_DMA_0_CH22>, + <&pd IMX_SC_R_DMA_0_CH23>, + <&pd IMX_SC_R_DMA_0_CH24>; +}; + &edma2 { interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>, @@ -45,24 +102,44 @@ <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>; }; +&flexcan1 { + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; +}; + +&flexcan2 { + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; +}; + +&flexcan3 { + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; +}; + &i2c0 { compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c"; interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; + dma-names = "tx","rx"; + dmas = <&edma3 1 0 0>, <&edma3 0 0 FSL_EDMA_RX>; }; &i2c1 { compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c"; interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + dma-names = "tx","rx"; + dmas = <&edma3 3 0 0>, <&edma3 2 0 FSL_EDMA_RX>; }; &i2c2 { compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c"; interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + dma-names = "tx","rx"; + dmas = <&edma3 5 0 0>, <&edma3 4 0 FSL_EDMA_RX>; }; &i2c3 { compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c"; interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + dma-names = "tx","rx"; + dmas = <&edma3 7 0 0>, <&edma3 6 0 FSL_EDMA_RX>; }; &lpuart0 { diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi index f580eb6db9a6..a0674c5c5576 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi @@ -4,6 +4,7 @@ */ #include <dt-bindings/clock/imx8-clock.h> +#include <dt-bindings/dma/fsl-edma.h> #include <dt-bindings/firmware/imx/rsrc.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdp-mba8xx.dts b/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdp-mba8xx.dts new file mode 100644 index 000000000000..f35514b7b338 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdp-mba8xx.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR X11) +/* + * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +/dts-v1/; + +#include "imx8dxp-tqma8xdp.dtsi" +#include "mba8xx.dtsi" + +/ { + model = "TQ-Systems i.MX8DXP TQMa8XDP on MBa8Xx"; + compatible = "tq,imx8dxp-tqma8xdp-mba8xx", "tq,imx8dxp-tqma8xdp", "fsl,imx8dxp"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdp.dtsi b/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdp.dtsi new file mode 100644 index 000000000000..e2de8517aa0e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdp.dtsi @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR X11) +/* + * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +#include "imx8dxp.dtsi" +#include "tqma8xx.dtsi" + +/ { + model = "TQ-Systems i.MX8DXP TQMa8XDP"; + compatible = "tq,imx8dxp-tqma8xdp", "fsl,imx8dxp"; +}; + +&pmic_thermal { + cooling-maps { + map0 { + cooling-device = + <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8dxp.dtsi b/arch/arm64/boot/dts/freescale/imx8dxp.dtsi new file mode 100644 index 000000000000..a8f7352332c0 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8dxp.dtsi @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * Copyright 2017-2019 NXP + */ + +/dts-v1/; + +#include "imx8qxp.dtsi" + +/delete-node/ &A35_2; +/delete-node/ &A35_3; + +&thermal_zones { + cpu0-thermal { + cooling-maps { + map0 { + cooling-device = + <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi index b53104ed8919..bd5b365867fd 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi @@ -151,6 +151,28 @@ clocks = <&clk IMX8MM_CLK_SAI3_ROOT>; }; }; + + sound-micfil { + compatible = "fsl,imx-audio-card"; + model = "micfil-audio"; + + pri-dai-link { + link-name = "micfil hifi"; + format = "i2s"; + + cpu { + sound-dai = <&micfil>; + }; + }; + }; + + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif1>; + spdif-out; + spdif-in; + }; }; &A53_0 { @@ -434,6 +456,16 @@ status = "okay"; }; +&micfil { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pdm>; + assigned-clocks = <&clk IMX8MM_CLK_PDM>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <196608000>; + status = "okay"; +}; + &mipi_csi { status = "okay"; @@ -509,6 +541,24 @@ status = "okay"; }; +&spdif1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif1>; + assigned-clocks = <&clk IMX8MM_CLK_SPDIF1>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_24M>, + <&clk IMX8MM_CLK_SPDIF1>, <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_AUDIO_PLL1_OUT>, <&clk IMX8MM_AUDIO_PLL2_OUT>; + clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3", + "rxtx4", "rxtx5", "rxtx6", "rxtx7", "spba", + "pll8k", "pll11k"; + status = "okay"; +}; + &uart2 { /* console */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; @@ -636,6 +686,18 @@ >; }; + pinctrl_pdm: pdmgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK 0xd6 + MX8MM_IOMUXC_SAI5_RXC_PDM_CLK 0xd6 + MX8MM_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC 0xd6 + MX8MM_IOMUXC_SAI5_RXD0_PDM_DATA0 0xd6 + MX8MM_IOMUXC_SAI5_RXD1_PDM_DATA1 0xd6 + MX8MM_IOMUXC_SAI5_RXD2_PDM_DATA2 0xd6 + MX8MM_IOMUXC_SAI5_RXD3_PDM_DATA3 0xd6 + >; + }; + pinctrl_pmic: pmicirqgrp { fsl,pins = < MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141 @@ -666,6 +728,13 @@ >; }; + pinctrl_spdif1: spdif1grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_TX_SPDIF1_OUT 0xd6 + MX8MM_IOMUXC_SPDIF_RX_SPDIF1_IN 0xd6 + >; + }; + pinctrl_typec1: typec1grp { fsl,pins = < MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11 0x159 diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts index 8b16bd68576c..33f8d7d1970e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts @@ -25,23 +25,21 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_led>; led1 { label = "led1"; - gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; led2 { label = "led2"; - gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + gpios = <&gpio3 8 GPIO_ACTIVE_LOW>; }; led3 { label = "led3"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; }; }; @@ -52,24 +50,12 @@ reg_rst_eth2: regulator-rst-eth2 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_eth2>; - gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>; + gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-always-on; regulator-name = "rst-usb-eth2"; }; - reg_usb1_vbus: regulator-usb1-vbus { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_usb1_vbus>; - gpio = <&gpio3 25 GPIO_ACTIVE_LOW>; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-name = "usb1-vbus"; - }; - reg_vdd_5v: regulator-5v { compatible = "regulator-fixed"; regulator-always-on; @@ -80,9 +66,6 @@ }; &ecspi2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi2>; - cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; status = "okay"; can@0 { @@ -91,7 +74,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can>; clocks = <&osc_can>; - interrupts-extended = <&gpio4 28 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio5 1 IRQ_TYPE_LEVEL_LOW>; /* * Limit the SPI clock to 15 MHz to prevent issues * with corrupted data due to chip errata. @@ -103,9 +86,6 @@ }; &ecspi3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi3>; - cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; status = "okay"; eeram@0 { @@ -117,8 +97,8 @@ &fec1 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; - phy-connection-type = "rgmii-rxid"; + pinctrl-0 = <&pinctrl_enet_rgmii>; + phy-connection-type = "rgmii-id"; phy-handle = <ðphy>; status = "okay"; @@ -127,55 +107,101 @@ #size-cells = <0>; ethphy: ethernet-phy@0 { + compatible = "ethernet-phy-id4f51.e91b"; reg = <0>; - reset-assert-us = <1>; - reset-deassert-us = <15000>; - reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; }; }; }; +/* + * Rename SoM signals according to board usage: + * GPIO_B_0 -> DIO1_OUT + * GPIO_B_1 -> DIO2_OUT + */ &gpio1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio1>; - gpio-line-names = "", "", "", "dio1-out", "", "", "dio1-in", "dio2-out", - "dio2-in", "dio3-out", "dio3-in", "dio4-out", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", ""; + gpio-line-names = "", "GPIO_A_0", "", "GPIO_A_1", + "", "GPIO_A_2", "GPIO_A_3", "GPIO_A_4", + "GPIO_A_5", "GPIO_A_6", "GPIO_A_7", "DIO1_OUT", + "DIO2_OUT", "USB_A_OC#", "CAM_MCK", "USB_B_OC#", + "ETH_MDC", "ETH_MDIO", "ETH_A_(S)(R)(G)MII_TXD3", + "ETH_A_(S)(R)(G)MII_TXD2", "ETH_A_(S)(R)(G)MII_TXD1", + "ETH_A_(S)(R)(G)MII_TXD0", "ETH_A_(R)(G)MII_TX_EN(_ER)", + "ETH_A_(R)(G)MII_TX_CLK", "ETH_A_(R)(G)MII_RX_DV(_ER)", + "ETH_A_(R)(G)MII_RX_CLK", "ETH_A_(S)(R)(G)MII_RXD0", + "ETH_A_(S)(R)(G)MII_RXD1", "ETH_A_(R)(G)MII_RXD2", + "ETH_A_(R)(G)MII_RXD3"; }; -&gpio5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio5>; - gpio-line-names = "", "", "dio4-in", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", ""; +/* + * Rename SoM signals according to board usage: + * GPIO_B_2 -> DIO3_OUT + * GPIO_B_3 -> DIO4_OUT + */ +&gpio3 { + gpio-line-names = "GPIO_C_5", "GPIO_C_4", "SDIO_B_CD#", "SDIO_B_D5", + "SDIO_B_D6", "SDIO_B_D7", "GPIO_C_0", "GPIO_C_1", + "GPIO_C_2", "GPIO_C_3", "SDIO_B_D0", "SDIO_B_D1", + "SDIO_B_D2", "SDIO_B_D3", "", "SDIO_B_D4", + "CARRIER_PWR_EN", "SDIO_B_CLK", "SDIO_B_CMD", "DIO3_OUT", + "USB_B_EN", "DIO4_OUT", "PCIe_CLKREQ#", "PCIe_A_PERST#", + "PCIe_WAKE#", "USB_A_EN"; }; -&i2c4 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c4>; +/* + * Rename SoM signals according to board usage: + * GPIO_B_4 -> DIO1_IN + * GPIO_B_5 -> DIO2_IN + * GPIO_B_6 -> DIO3_IN + * GPIO_B_7 -> DIO4_IN + */ +&gpio4 { + gpio-line-names = "GPIO_C_7", "", "I2S_A_DATA_IN", "I2S_B_DATA_IN", + "DIO1_IN", "BOOT_SEL0#", "BOOT_SEL1#", "", + "", "", "I2S_LRCLK", "I2S_BITCLK", + "I2S_A_DATA_OUT", "I2S_B_DATA_OUT", "DIO2_IN", "DIO3_IN", + "DIO4_IN", "SPI_A_/WP_(IO2)", "SPI_A_/HOLD_(IO3)", "GPIO_C_6", + "I2S_MCLK", "UART_A_TX", "UART_A_RX", "UART_A_CTS", + "UART_A_RTS", "", "", "", + "PCIe_SM_ALERT", "UART_B_RTS", "UART_B_CTS", "UART_B_RX"; +}; + +&i2c3 { status = "okay"; + + usb-hub@2c { + compatible = "microchip,usb2514b"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_hub>; + reg = <0x2c>; + non-removable-ports = <0>, <3>; + reset-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + }; }; &pwm2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm2>; status = "okay"; }; +®_usb2_vbus { + status = "disabled"; +}; + +®_usdhc2_vcc { + status = "disabled"; +}; + +®_usdhc3_vcc { + status = "disabled"; +}; + &uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; uart-has-rtscts; status = "okay"; }; &uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; linux,rs485-enabled-at-boot-time; uart-has-rtscts; status = "okay"; @@ -183,8 +209,6 @@ &usbotg1 { dr_mode = "otg"; - disable-over-current; - vbus-supply = <®_usb1_vbus>; status = "okay"; }; @@ -195,14 +219,17 @@ #size-cells = <0>; status = "okay"; + /* VBUS is controlled by the hub */ + /delete-property/ vbus-supply; + usb1@1 { - compatible = "usb424,9514"; + compatible = "usb424,2514"; reg = <1>; #address-cells = <1>; #size-cells = <0>; usbnet: ethernet@1 { - compatible = "usb424,ec00"; + compatible = "usbb95,772b"; reg = <1>; local-mac-address = [ 00 00 00 00 00 00 ]; }; @@ -210,167 +237,20 @@ }; &usdhc2 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc2>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>; vmmc-supply = <®_vdd_3v3>; - vqmmc-supply = <®_nvcc_sd>; - cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; status = "okay"; }; &iomuxc { pinctrl_can: cangrp { fsl,pins = < - MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x19 - >; - }; - - pinctrl_ecspi2: ecspi2grp { - fsl,pins = < - MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82 - MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82 - MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82 - MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x19 - >; - }; - - pinctrl_ecspi3: ecspi3grp { - fsl,pins = < - MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x82 - MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x82 - MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x82 - MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x19 - >; - }; - - pinctrl_enet: enetgrp { - fsl,pins = < - MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 - MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 - MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f - MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f - MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f - MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f - MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 - MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 - MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 - MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 - MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f - MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 - MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 - MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f - MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x19 /* PHY RST */ - MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x19 /* ETH IRQ */ - >; - }; - - pinctrl_gpio_led: gpioledgrp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x19 - MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x19 - MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x19 - >; - }; - - pinctrl_gpio1: gpio1grp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x19 - MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19 - MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 - MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x19 - MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19 - MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x19 - MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 - >; - }; - - pinctrl_gpio5: gpio5grp { - fsl,pins = < - MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x19 - >; - }; - - pinctrl_i2c4: i2c4grp { - fsl,pins = < - MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 - MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 - >; - }; - - pinctrl_pwm2: pwm2grp { - fsl,pins = < - MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x19 - >; - }; - - pinctrl_reg_usb1_vbus: regusb1vbusgrp { - fsl,pins = < - MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x19 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x140 - MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x140 - MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x140 - MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x140 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x140 - MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x140 - MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x140 - MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x140 - >; - }; - - pinctrl_usb_eth2: usbeth2grp { - fsl,pins = < - MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 - MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 - MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 - MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 - MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 - MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 - MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 - >; - }; - - pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { - fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 - MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 - MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 - MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 - MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 - MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 - MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1 0x19 /* SDIO_B_PWR_EN */ >; }; - pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + pinctrl_usb_hub: usbhubgrp { fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 - MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 - MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 - MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 - MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 - MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 - MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x19 /* SDIO_B_WP */ >; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts index dcec57c20399..aab8e2421650 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts @@ -279,8 +279,8 @@ pinctrl_i2c4: i2c4grp { fsl,pins = < - MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 - MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x40000083 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x40000083 >; }; @@ -292,19 +292,19 @@ pinctrl_uart1: uart1grp { fsl,pins = < - MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x140 - MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x140 - MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x140 - MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x140 + MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x0 + MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x0 + MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x0 + MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x0 >; }; pinctrl_uart2: uart2grp { fsl,pins = < - MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x140 - MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x140 - MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x140 - MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x140 + MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x0 + MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x0 + MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x0 + MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x0 >; }; @@ -316,40 +316,40 @@ pinctrl_usdhc2: usdhc2grp { fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x90 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 - MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x19 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xd0 >; }; pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x94 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 - MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x19 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xd0 >; }; pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x96 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 - MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x19 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xd0 >; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi index 6e75ab879bf5..663ae52b4852 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi @@ -3,6 +3,7 @@ * Copyright (C) 2022 Kontron Electronics GmbH */ +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include "imx8mm.dtsi" @@ -28,6 +29,73 @@ chosen { stdout-path = &uart3; }; + + reg_vdd_carrier: regulator-vdd-carrier { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_vdd_carrier>; + gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + regulator-name = "VDD_CARRIER"; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + + regulator-state-disk { + regulator-off-in-suspend; + }; + }; + + reg_usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb1_vbus>; + enable-active-high; + gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "VBUS_USB1"; + }; + + reg_usb2_vbus: regulator-usb2-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb2_vbus>; + enable-active-high; + gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "VBUS_USB2"; + }; + + reg_usdhc2_vcc: regulator-usdhc2-vcc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vcc>; + enable-active-high; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "VCC_SDIO_A"; + }; + + reg_usdhc3_vcc: regulator-usdhc3-vcc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc3_vcc>; + enable-active-high; + gpio = <&gpio5 1 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "VCC_SDIO_B"; + }; }; &A53_0 { @@ -96,6 +164,79 @@ }; }; +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>, <&pinctrl_ecspi2_gpio>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; +}; + +&gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio1>; + gpio-line-names = "", "GPIO_A_0", "", "GPIO_A_1", + "", "GPIO_A_2", "GPIO_A_3", "GPIO_A_4", + "GPIO_A_5", "GPIO_A_6", "GPIO_A_7", "GPIO_B_0", + "GPIO_B_1", "USB_A_OC#", "CAM_MCK", "USB_B_OC#", + "ETH_MDC", "ETH_MDIO", "ETH_A_(S)(R)(G)MII_TXD3", + "ETH_A_(S)(R)(G)MII_TXD2", "ETH_A_(S)(R)(G)MII_TXD1", + "ETH_A_(S)(R)(G)MII_TXD0", "ETH_A_(R)(G)MII_TX_EN(_ER)", + "ETH_A_(R)(G)MII_TX_CLK", "ETH_A_(R)(G)MII_RX_DV(_ER)", + "ETH_A_(R)(G)MII_RX_CLK", "ETH_A_(S)(R)(G)MII_RXD0", + "ETH_A_(S)(R)(G)MII_RXD1", "ETH_A_(R)(G)MII_RXD2", + "ETH_A_(R)(G)MII_RXD3"; +}; + +&gpio2 { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "", "", + "SDIO_A_CD#", "SDIO_A_CLK", "SDIO_A_CMD", "SDIO_A_D0", + "SDIO_A_D1", "SDIO_A_D2", "SDIO_A_D3", "SDIO_A_PWR_EN", + "SDIO_A_WP"; +}; + +&gpio3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio3>; + gpio-line-names = "GPIO_C_5", "GPIO_C_4", "SDIO_B_CD#", "SDIO_B_D5", + "SDIO_B_D6", "SDIO_B_D7", "GPIO_C_0", "GPIO_C_1", + "GPIO_C_2", "GPIO_C_3", "SDIO_B_D0", "SDIO_B_D1", + "SDIO_B_D2", "SDIO_B_D3", "", "SDIO_B_D4", + "CARRIER_PWR_EN", "SDIO_B_CLK", "SDIO_B_CMD", "GPIO_B_2", + "USB_B_EN", "GPIO_B_3", "PCIe_CLKREQ#", "PCIe_A_PERST#", + "PCIe_WAKE#", "USB_A_EN"; +}; + +&gpio4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio4>; + gpio-line-names = "GPIO_C_7", "", "I2S_A_DATA_IN", "I2S_B_DATA_IN", + "GPIO_B_4", "BOOT_SEL0#", "BOOT_SEL1#", "", + "", "", "I2S_LRCLK", "I2S_BITCLK", + "I2S_A_DATA_OUT", "I2S_B_DATA_OUT", "GPIO_B_5", "GPIO_B_6", + "GPIO_B_7", "SPI_A_/WP_(IO2)", "SPI_A_/HOLD_(IO3)", "GPIO_C_6", + "I2S_MCLK", "UART_A_TX", "UART_A_RX", "UART_A_CTS", + "UART_A_RTS", "", "", "", + "PCIe_SM_ALERT", "UART_B_RTS", "UART_B_CTS", "UART_B_RX"; +}; + +&gpio5 { + gpio-line-names = "UART_B_TX", "SDIO_B_PWR_EN", "SDIO_B_WP", "PWM_2", + "PWM_1", "PWM_0", "", "", + "", "", "SPI_A_SCK", "SPI_A_SDO_(IO1)", + "SPI_A_SCK", "SPI_A_CS0#", "", "", + "I2C_A_SCL", "I2C_A_SDA", "I2C_B_SCL", "I2C_B_SDA", + "PCIe_SMCLK", "PCIe_SMDAT", "SPI_B_SCK", "SPI_B_SDO", + "SPI_B_SDI", "SPI_B_CS0#", "UART_CON_RX", "UART_CON_TX", + "UART_C_RX", "UART_C_TX"; +}; + &i2c1 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -205,22 +346,86 @@ }; }; + eeprom: eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + address-width = <16>; + pagesize = <32>; + size = <8192>; + }; + rv3028: rtc@52 { compatible = "microcrystal,rv3028"; reg = <0x52>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rtc>; - interrupts-extended = <&gpio4 1 IRQ_TYPE_LEVEL_HIGH>; - trickle-diode-disable; + interrupts-extended = <&gpio4 1 IRQ_TYPE_LEVEL_LOW>; }; }; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; +}; + &uart3 { /* console */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; status = "okay"; }; +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>; + vbus-supply = <®_usb1_vbus>; +}; + +&usbotg2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2>; + vbus-supply = <®_usb2_vbus>; +}; + &usdhc1 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; @@ -233,6 +438,26 @@ status = "okay"; }; +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + vmmc-supply = <®_usdhc2_vcc>; + vqmmc-supply = <®_nvcc_sd>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_gpio>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_gpio>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_gpio>; + vmmc-supply = <®_usdhc3_vcc>; + vqmmc-supply = <®_nvcc_sd>; + cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; +}; + &wdog1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; @@ -241,6 +466,12 @@ }; &iomuxc { + pinctrl_csi_mck: csimckgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1 0x59 /* CAM_MCK */ + >; + }; + pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 @@ -250,10 +481,140 @@ >; }; + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82 /* SPI_A_SDI_(IO0) */ + MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82 /* SPI_A_SDO_(IO1) */ + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82 /* SPI_A_SCK */ + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x19 /* SPI_A_CS0# */ + >; + }; + + pinctrl_ecspi2_gpio: ecspi2gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x19 /* SPI_A_/WP_(IO2) */ + MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x19 /* SPI_A_/HOLD_(IO3) */ + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x82 /* SPI_B_SDI */ + MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x82 /* SPI_B_SDO */ + MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x82 /* SPI_B_SCK */ + MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x19 /* SPI_B_CS0# */ + >; + }; + + pinctrl_enet_rgmii: enetrgmiigrp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x03 /* ETH_MDC */ + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x03 /* ETH_MDIO */ + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f /* ETH_A_(S)(R)(G)MII_TXD3 */ + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f /* ETH_A_(S)(R)(G)MII_TXD2 */ + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f /* ETH_A_(S)(R)(G)MII_TXD1 */ + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f /* ETH_A_(S)(R)(G)MII_TXD0 */ + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 /* ETH_A_(R)(G)MII_RXD3 */ + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 /* ETH_A_(R)(G)MII_RXD2 */ + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 /* ETH_A_(S)(R)(G)MII_RXD1 */ + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 /* ETH_A_(S)(R)(G)MII_RXD0 */ + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f /* ETH_A_(R)(G)MII_TX_CLK */ + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 /* ETH_A_(R)(G)MII_RX_CLK */ + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 /* ETH_A_(R)(G)MII_RX_DV(_ER) */ + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f /* ETH_A_(R)(G)MII_TX_EN(_ER) */ + >; + }; + + pinctrl_enet_rmii: enetrmiigrp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x03 /* ETH_MDC */ + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x03 /* ETH_MDIO */ + MX8MM_IOMUXC_ENET_TD2_ENET1_TX_CLK 0x4000001f /* ETH_A_(S)(R)(G)MII_TXD2 */ + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x56 /* ETH_A_(S)(R)(G)MII_TXD1 */ + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x56 /* ETH_A_(S)(R)(G)MII_TXD0 */ + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x56 /* ETH_A_(S)(R)(G)MII_RXD1 */ + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x56 /* ETH_A_(S)(R)(G)MII_RXD0 */ + MX8MM_IOMUXC_ENET_RXC_ENET1_RX_ER 0x56 /* ETH_A_(R)(G)MII_RX_CLK */ + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x56 /* ETH_A_(R)(G)MII_RX_DV(_ER) */ + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x56 /* ETH_A_(R)(G)MII_TX_EN(_ER) */ + >; + }; + + pinctrl_gpio1: gpio1grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x19 /* GPIO_A_0 */ + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x19 /* GPIO_A_1 */ + MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x19 /* GPIO_A_2 */ + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19 /* GPIO_A_3 */ + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19 /* GPIO_A_4 */ + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x19 /* GPIO_A_5 */ + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 /* GPIO_A_6 */ + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 /* GPIO_A_7 */ + MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x19 /* GPIO_B_0 */ + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x19 /* GPIO_B_1 */ + >; + }; + + pinctrl_gpio3: gpio3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0 0x19 /* GPIO_C_5 */ + MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x19 /* GPIO_C_4 */ + MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6 0x19 /* GPIO_C_0 */ + MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x19 /* GPIO_C_1 */ + MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8 0x19 /* GPIO_C_2 */ + MX8MM_IOMUXC_NAND_DATA03_GPIO3_IO9 0x19 /* GPIO_C_3 */ + MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x19 /* GPIO_B_2 */ + MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x19 /* GPIO_B_3 */ + >; + }; + + pinctrl_gpio4: gpio4grp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x19 /* GPIO_C_7 */ + MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x19 /* GPIO_B_4 */ + MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x19 /* BOOT_SEL0# */ + MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x19 /* BOOT_SEL1# */ + MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x19 /* GPIO_B_5 */ + MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x19 /* GPIO_B_6 */ + MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x19 /* GPIO_B_7 */ + MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x19 /* GPIO_C_6 */ + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < - MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 - MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x40000083 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x40000083 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000083 /* I2C_A_SCL */ + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x40000083 /* I2C_A_SDA */ + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x40000083 /* I2C_B_SCL */ + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x40000083 /* I2C_B_SDA */ + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x40000083 /* PCIe_SMCLK and I2C_CAM_SCL/CSI_TX_P */ + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x40000083 /* PCIe_SMDAT and I2C_CAM_SDA/CSI_TX_N */ + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x19 /* PCIe_CLKREQ# */ + MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x19 /* PCIe_A_PERST# */ + MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x19 /* PCIe_WAKE# */ + MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x19 /* PCIe_SM_ALERT */ >; }; @@ -263,16 +624,113 @@ >; }; + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x19 /* PWM_0 */ + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x19 /* PWM_1 */ + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT 0x19 /* PWM_2 */ + >; + }; + + pinctrl_reg_usb1_vbus: regusb1vbusgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x19 /* USB_A_EN */ + >; + }; + + pinctrl_reg_usb2_vbus: regusb2vbusgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x19 /* USB_B_EN */ + >; + }; + + pinctrl_reg_usdhc2_vcc: regusdhc2vccgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x19 /* SDIO_A_PWR_EN */ + >; + }; + + pinctrl_reg_usdhc3_vcc: regusdhc3vccgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1 0x19 /* SDIO_B_PWR_EN */ + >; + }; + + pinctrl_reg_vdd_carrier: regvddcarriergrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 /* CARRIER_PWR_EN */ + >; + }; + pinctrl_rtc: rtcgrp { fsl,pins = < MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1 0x19 >; }; + pinctrl_sai1: sai1grp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXD0_SAI1_RX_DATA0 0xd6 /* I2S_A_DATA_IN */ + MX8MM_IOMUXC_SAI1_TXD0_SAI1_TX_DATA0 0xd6 /* I2S_A_DATA_OUT */ + MX8MM_IOMUXC_SAI1_RXD1_SAI1_RX_DATA1 0xd6 /* I2S_B_DATA_IN */ + MX8MM_IOMUXC_SAI1_TXD1_SAI1_TX_DATA1 0xd6 /* I2S_B_DATA_OUT */ + MX8MM_IOMUXC_SAI1_MCLK_SAI1_MCLK 0xd6 /* I2S_MCLK */ + MX8MM_IOMUXC_SAI1_TXFS_SAI1_TX_SYNC 0xd6 /* I2S_LRCLK */ + MX8MM_IOMUXC_SAI1_TXC_SAI1_TX_BCLK 0xd6 /* I2S_BITCLK */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x0 /* UART_A_RX */ + MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x0 /* UART_A_TX */ + MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x0 /* UART_A_CTS */ + MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x0 /* UART_A_RTS */ + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x0 /* UART_B_RX */ + MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x0 /* UART_B_TX */ + MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x0 /* UART_B_CTS */ + MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x0 /* UART_B_RTS */ + >; + }; + pinctrl_uart3: uart3grp { fsl,pins = < - MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 - MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 /* UART_CON_RX */ + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 /* UART_CON_TX */ + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x0 /* UART_C_RX */ + MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x0 /* UART_C_TX */ + >; + }; + + pinctrl_usb1: usb1grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x19 /* USB_A_OC# */ + >; + }; + + pinctrl_usb2: usb2grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC 0x19 /* USB_B_OC# */ >; }; @@ -327,6 +785,103 @@ >; }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x90 /* SDIO_A_CLK */ + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 /* SDIO_A_CMD */ + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 /* SDIO_A_D0 */ + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 /* SDIO_A_D1 */ + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 /* SDIO_A_D2 */ + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 /* SDIO_A_D3 */ + MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x400000d6 /* SDIO_A_WP */ + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x90 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x94 /* SDIO_A_CLK */ + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 /* SDIO_A_CMD */ + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 /* SDIO_A_D0 */ + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 /* SDIO_A_D1 */ + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 /* SDIO_A_D2 */ + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 /* SDIO_A_D3 */ + MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x400000d6 /* SDIO_A_WP */ + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x90 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x96 /* SDIO_A_CLK */ + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 /* SDIO_A_CMD */ + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 /* SDIO_A_D0 */ + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 /* SDIO_A_D1 */ + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 /* SDIO_A_D2 */ + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 /* SDIO_A_D3 */ + MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x400000d6 /* SDIO_A_WP */ + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x90 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x19 /* SDIO_A_CD# */ + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x90 /* SDIO_B_CLK */ + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x90 /* SDIO_B_CMD */ + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x90 /* SDIO_B_D0 */ + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x90 /* SDIO_B_D1 */ + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x90 /* SDIO_B_D2 */ + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x90 /* SDIO_B_D3 */ + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x90 /* SDIO_B_D4 */ + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x90 /* SDIO_B_D5 */ + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x90 /* SDIO_B_D6 */ + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x90 /* SDIO_B_D7 */ + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x94 /* SDIO_B_CLK */ + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x94 /* SDIO_B_CMD */ + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x94 /* SDIO_B_D0 */ + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x94 /* SDIO_B_D1 */ + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x94 /* SDIO_B_D2 */ + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x94 /* SDIO_B_D3 */ + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x94 /* SDIO_B_D4 */ + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x94 /* SDIO_B_D5 */ + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x94 /* SDIO_B_D6 */ + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x94 /* SDIO_B_D7 */ + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x96 /* SDIO_B_CLK */ + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x96 /* SDIO_B_CMD */ + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x96 /* SDIO_B_D0 */ + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x96 /* SDIO_B_D1 */ + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x96 /* SDIO_B_D2 */ + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x96 /* SDIO_B_D3 */ + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x96 /* SDIO_B_D4 */ + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x96 /* SDIO_B_D5 */ + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x96 /* SDIO_B_D6 */ + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x96 /* SDIO_B_D7 */ + >; + }; + + pinctrl_usdhc3_gpio: usdhc3gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 /* SDIO_B_CD# */ + MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x19 /* SDIO_B_WP */ + >; + }; + pinctrl_wdog: wdoggrp { fsl,pins = < MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi index 1f8326613ee9..2076148e0862 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi @@ -237,8 +237,8 @@ pinctrl_i2c1: i2c1grp { fsl,pins = < - MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 - MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x40000083 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x40000083 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts index ea6e8b85169f..01b632b220dc 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts @@ -5,6 +5,8 @@ /dts-v1/; +#include <dt-bindings/phy/phy-imx8-pcie.h> + #include "imx8mm-tqma8mqml.dtsi" #include "mba8mx.dtsi" @@ -74,19 +76,23 @@ }; &pcie_phy { - clocks = <&pcie0_refclk>; + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + fsl,clkreq-unsupported; + clocks = <&pcieclk 2>; + clock-names = "ref"; status = "okay"; }; +/* PCIe slot on X36 */ &pcie0 { reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>; - clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>, + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcieclk 3>, <&clk IMX8MM_CLK_PCIE1_AUX>; assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, - <&clk IMX8MM_CLK_PCIE1_CTRL>; + <&clk IMX8MM_CLK_PCIE1_CTRL>; assigned-clock-rates = <10000000>, <250000000>; assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, - <&clk IMX8MM_SYS_PLL2_250M>; + <&clk IMX8MM_SYS_PLL2_250M>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi index 6425773f68e0..41c966147b94 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi @@ -47,25 +47,20 @@ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; status = "okay"; }; - - reg_usb_otg1_vbus: regulator-usb-otg1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_usb1_en>; - compatible = "regulator-fixed"; - regulator-name = "usb_otg1_vbus"; - gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; }; -/* off-board header */ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2>; - cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, + <&gpio1 10 GPIO_ACTIVE_LOW>; status = "okay"; + + tpm@1 { + compatible = "tcg,tpm_tis-spi"; + reg = <0x1>; + spi-max-frequency = <36000000>; + }; }; &gpio1 { @@ -144,9 +139,10 @@ }; &usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; dr_mode = "otg"; over-current-active-low; - vbus-supply = <®_usb_otg1_vbus>; status = "okay"; }; @@ -204,20 +200,13 @@ >; }; - pinctrl_reg_usb1_en: regusb1grp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x41 - MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x141 - MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x41 - >; - }; - pinctrl_spi2: spi2grp { fsl,pins = < MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6 MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6 MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6 MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6 + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0xd6 >; }; @@ -234,4 +223,11 @@ MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 >; }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x141 + MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x41 + >; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts index 87b80e2412cb..5e2cbaf27e0f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts @@ -285,7 +285,8 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>, + <&gpio4 24 GPIO_ACTIVE_LOW>; status = "okay"; flash@0 { @@ -294,6 +295,12 @@ spi-max-frequency = <40000000>; status = "okay"; }; + + tpm@1 { + compatible = "tcg,tpm_tis-spi"; + reg = <0x1>; + spi-max-frequency = <36000000>; + }; }; &fec1 { @@ -319,7 +326,7 @@ &gpio4 { gpio-line-names = "", "", "", "", - "", "", "uart3_rs232#", "uart3_rs422#", + "dig1_ctl", "dig2_ctl", "uart3_rs232#", "uart3_rs422#", "uart3_rs485#", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "uart4_rs485#", "", "sim1det#", "sim2det#", ""; @@ -842,6 +849,8 @@ pinctrl_hog: hoggrp { fsl,pins = < + MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x40000041 /* DIG1_CTL */ + MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x40000041 /* DIG2_CTL */ MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* DIG2_OUT */ MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x40000041 /* DIG2_IN */ MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000041 /* DIG1_IN */ @@ -987,6 +996,7 @@ MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x140 + MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24 0x140 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts index 35b8d2060cd9..bbd80896db96 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts @@ -99,8 +99,6 @@ }; &lcdif { - assigned-clocks = <&clk IMX8MN_VIDEO_PLL1>; - assigned-clock-rates = <594000000>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi index a0e13d3324ed..269e70f66a13 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi @@ -110,6 +110,20 @@ spdif-out; spdif-in; }; + + sound-micfil { + compatible = "fsl,imx-audio-card"; + model = "micfil-audio"; + + pri-dai-link { + link-name = "micfil hifi"; + format = "i2s"; + + cpu { + sound-dai = <&micfil>; + }; + }; + }; }; &easrc { @@ -285,6 +299,16 @@ status = "okay"; }; +&micfil { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pdm>; + assigned-clocks = <&clk IMX8MN_CLK_PDM>; + assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>; + assigned-clock-rates = <196608000>; + status = "okay"; +}; + &mipi_csi { status = "okay"; @@ -522,6 +546,18 @@ >; }; + pinctrl_pdm: pdmgrp { + fsl,pins = < + MX8MN_IOMUXC_SAI5_MCLK_SAI5_MCLK 0xd6 + MX8MN_IOMUXC_SAI5_RXC_PDM_CLK 0xd6 + MX8MN_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC 0xd6 + MX8MN_IOMUXC_SAI5_RXD0_PDM_BIT_STREAM0 0xd6 + MX8MN_IOMUXC_SAI5_RXD1_PDM_BIT_STREAM1 0xd6 + MX8MN_IOMUXC_SAI5_RXD2_PDM_BIT_STREAM2 0xd6 + MX8MN_IOMUXC_SAI5_RXD3_PDM_BIT_STREAM3 0xd6 + >; + }; + pinctrl_pmic: pmicirqgrp { fsl,pins = < MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141 diff --git a/arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts b/arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts index 1b633bd1ebb6..ea1855171fb0 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts @@ -10,7 +10,7 @@ / { model = "RVE gateway"; - compatible = "rve,rve-gateway", "variscite,var-som-mx8mn", "fsl,imx8mn"; + compatible = "rve,gateway", "variscite,var-som-mx8mn", "fsl,imx8mn"; crystal_duart_24m: crystal-duart-24m { compatible = "fixed-clock"; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtso b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtso new file mode 100644 index 000000000000..96db07fc9bec --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtso @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2022-2024 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> + +#include "imx8mn-pinfunc.h" + +&{/} { + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + type = "micro"; + label = "X19"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_connector>; + id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + + port { + usb_dr_connector: endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; + }; +}; + +&rst_usb_hub_hog { + output-low; +}; + +&sel_usb_hub_hog { + output-low; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + dr_mode = "otg"; + srp-disable; + hnp-disable; + adp-disable; + power-active-high; + /delete-property/ disable-over-current; + over-current-active-low; + usb-role-switch; + status = "okay"; + + port { + usb1_drd_sw: endpoint { + remote-endpoint = <&usb_dr_connector>; + }; + }; +}; + +&iomuxc { + pinctrl_usb1_connector: usb1-connectorgrp { + fsl,pins = <MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x1c0>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts index c07d59147ab5..433d8bba4425 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts @@ -41,7 +41,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0hub_sel>; - sel-usb-hub-hog { + sel_usb_hub_hog: sel-usb-hub-hog { gpio-hog; gpios = <1 GPIO_ACTIVE_HIGH>; output-high; @@ -198,8 +198,7 @@ pinctrl_usbotg: usbotggrp { fsl,pins = <MX8MN_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x84>, - <MX8MN_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x84>, - <MX8MN_IOMUXC_GPIO1_IO10_USB1_OTG_ID 0x1C4>; + <MX8MN_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x84>; }; pinctrl_usdhc2: usdhc2grp { diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 136e75c51251..932c8b05c75f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -1168,7 +1168,7 @@ <&clk IMX8MN_SYS_PLL1_800M>; assigned-clock-rates = <266000000>, <24000000>, - <594000000>, + <24000000>, <500000000>, <200000000>; #power-domain-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi index e5da90804780..8be251b69378 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi @@ -50,6 +50,8 @@ phy-mode = "rgmii-id"; phy-handle = <ðphy0>; snps,force_thresh_dma_mode; + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; status = "okay"; mdio { @@ -66,6 +68,71 @@ interrupts = <10 IRQ_TYPE_LEVEL_LOW>; }; }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <5>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + snps,map-to-dma-channel = <0>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + snps,map-to-dma-channel = <1>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + snps,map-to-dma-channel = <2>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + snps,map-to-dma-channel = <3>; + }; + + queue4 { + snps,dcb-algorithm; + snps,priority = <0xf0>; + snps,map-to-dma-channel = <4>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <5>; + snps,tx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + }; + + queue4 { + snps,dcb-algorithm; + snps,priority = <0xf0>; + }; + }; }; &flexspi { @@ -206,6 +273,10 @@ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>; uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "nxp,88w8997-bt"; + }; }; &usdhc1 { diff --git a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts index 5828c9d7821d..7e1b58dbe23a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts @@ -6,6 +6,7 @@ /dts-v1/; #include <dt-bindings/net/qca-ar803x.h> +#include <dt-bindings/phy/phy-imx8-pcie.h> #include "imx8mp.dtsi" / { @@ -45,6 +46,19 @@ clock-frequency = <25000000>; }; + clk_pwm4: clock-pwm4 { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + clock-output-names = "codec-pwm4"; + /* + * 1 / 83 ns ~= 12 MHz , but since the PWM input clock is 24 MHz + * and the calculated PWM period is 1 and duty cycle is 50%, the + * result is exactly 12 MHz, which is fine for SGTL5000 MCLK. + */ + pwms = <&pwm4 0 83 0>; + }; + panel: panel { /* Compatible string is filled in by panel board DT Overlay. */ backlight = <&backlight>; @@ -82,6 +96,24 @@ vin-supply = <&buck4>; }; + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "SGTL5000-Card"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&codec_dai>; + simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,widgets = "Headphone", "Headphone Jack"; + simple-audio-card,routing = "Headphone Jack", "HP_OUT"; + + cpu_dai: simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + + codec_dai: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + }; + }; + watchdog { /* TPS3813 */ compatible = "linux,wdt-gpio"; pinctrl-names = "default"; @@ -121,7 +153,7 @@ flash@0 { /* W25Q128JVEI */ compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <100000000>; /* Up to 133 MHz */ + spi-max-frequency = <40000000>; spi-tx-bus-width = <1>; spi-rx-bus-width = <1>; }; @@ -288,6 +320,15 @@ sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; + sgtl5000: audio-codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + clocks = <&clk_pwm4>; + VDDA-supply = <&buck4>; + VDDIO-supply = <&buck4>; + }; + usb-hub@2c { compatible = "microchip,usb2514bi"; reg = <0x2c>; @@ -429,6 +470,21 @@ status = "okay"; }; +&pcie_phy { + clocks = <&pcieclk 0>; + clock-names = "ref"; + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + status = "okay"; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + fsl,max-link-speed = <3>; + reset-gpio = <&gpio1 5 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_panel_pwm>; @@ -436,6 +492,23 @@ status = "disabled"; }; +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&sai3 { + #clock-cells = <0>; + #sound-dai-cells = <0>; + assigned-clocks = <&clk IMX8MP_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>; + assigned-clock-rates = <12288000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + status = "okay"; +}; + /* SD slot */ &usdhc2 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; @@ -785,6 +858,12 @@ >; }; + pinctrl_pwm4: pwm4-grp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT 0xd6 + >; + }; + pinctrl_rtc: rtc-grp { fsl,pins = < /* RTC_IRQ# */ @@ -816,7 +895,6 @@ MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0xd6 MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0xd6 MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0xd6 - MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK 0xd6 MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0xd6 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index f87fa5a948cc..9beba8d6a0df 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -23,7 +23,7 @@ port { hdmi_connector_in: endpoint { - remote-endpoint = <&adv7533_out>; + remote-endpoint = <&adv7535_out>; }; }; }; @@ -107,6 +107,13 @@ enable-active-high; }; + reg_vext_3v3: regulator-vext-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VEXT_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "wm8960-audio"; @@ -364,7 +371,7 @@ regulator-always-on; }; - BUCK5 { + reg_buck5: BUCK5 { regulator-name = "BUCK5"; regulator-min-microvolt = <1650000>; regulator-max-microvolt = <1950000>; @@ -415,14 +422,16 @@ hdmi@3d { compatible = "adi,adv7535"; - reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>; - reg-names = "main", "cec", "edid", "packet"; + reg = <0x3d>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; adi,dsi-lanes = <4>; - adi,input-depth = <8>; - adi,input-colorspace = "rgb"; - adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; + avdd-supply = <®_buck5>; + dvdd-supply = <®_buck5>; + pvdd-supply = <®_buck5>; + a2vdd-supply = <®_buck5>; + v3p3-supply = <®_vext_3v3>; + v1p2-supply = <®_buck5>; ports { #address-cells = <1>; @@ -431,7 +440,7 @@ port@0 { reg = <0>; - adv7533_in: endpoint { + adv7535_in: endpoint { remote-endpoint = <&dsi_out>; }; }; @@ -439,7 +448,7 @@ port@1 { reg = <1>; - adv7533_out: endpoint { + adv7535_out: endpoint { remote-endpoint = <&hdmi_connector_in>; }; }; @@ -524,7 +533,7 @@ reg = <1>; dsi_out: endpoint { - remote-endpoint = <&adv7533_in>; + remote-endpoint = <&adv7535_in>; data-lanes = <1 2 3 4>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts index c8640cac3edc..00a240484c25 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts @@ -19,6 +19,30 @@ stdout-path = &uart1; }; + backlight_lvds: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lvds1>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <11>; + enable-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; + num-interpolated-steps = <2>; + power-supply = <®_lvds1_reg_en>; + pwms = <&pwm3 0 50000 0>; + }; + + panel1_lvds: panel-lvds { + compatible = "edt,etml1010g3dra"; + backlight = <&backlight_lvds>; + power-supply = <®_vcc_3v3_sw>; + + port { + panel1_in: endpoint { + remote-endpoint = <&ldb_lvds_ch1>; + }; + }; + }; + reg_can1_stby: regulator-can1-stby { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -39,6 +63,15 @@ regulator-name = "can2-stby"; }; + reg_lvds1_reg_en: regulator-lvds1 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <1200000>; + regulator-name = "lvds1_reg_en"; + }; + reg_usb1_vbus: regulator-usb1-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -61,6 +94,13 @@ startup-delay-us = <100>; off-on-delay-us = <12000>; }; + + reg_vcc_3v3_sw: regulator-vcc-3v3-sw { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3_SW"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &eqos { @@ -135,10 +175,41 @@ }; }; +&lcdif2 { + status = "okay"; +}; + +&lvds_bridge { + status = "okay"; + + ports { + port@2 { + ldb_lvds_ch1: endpoint { + remote-endpoint = <&panel1_in>; + }; + }; + }; +}; + &snvs_pwrkey { status = "okay"; }; +&pwm3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; +}; + +&rv3028 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + interrupt-parent = <&gpio4>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + trickle-resistor-ohms = <3000>; +}; + /* debug console */ &uart1 { pinctrl-names = "default"; @@ -239,12 +310,12 @@ MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90 MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90 MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90 - MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16 - MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16 - MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16 - MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16 - MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16 - MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16 + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x12 + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x12 + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x12 + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x12 + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x12 + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x12 MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x10 >; }; @@ -289,16 +360,34 @@ >; }; + pinctrl_lvds1: lvds1grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x12 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_TX__PWM3_OUT 0x12 + >; + }; + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { fsl,pins = < MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40 >; }; + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x1C0 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < - MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x40 - MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x40 + MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140 + MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140 >; }; @@ -319,7 +408,7 @@ pinctrl_usdhc2_pins: usdhc2-gpiogrp { fsl,pins = < - MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x40 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi index c976c3b6cbc6..e6ffa6a6b68b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi @@ -175,7 +175,6 @@ rv3028: rtc@52 { compatible = "microcrystal,rv3028"; reg = <0x52>; - trickle-resistor-ohms = <3000>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi index 0e8d0f3c7ea8..e7bf032265e0 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi @@ -63,8 +63,15 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2>; - cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, + <&gpio1 10 GPIO_ACTIVE_LOW>; status = "okay"; + + tpm@1 { + compatible = "tcg,tpm_tis-spi"; + reg = <0x1>; + spi-max-frequency = <36000000>; + }; }; &gpio4 { @@ -228,6 +235,7 @@ MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x140 MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x140 MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x140 + MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x140 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi index c3305f0d4001..faa17cbbe2fd 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi @@ -552,7 +552,7 @@ regulator-name = "On-module +V3.3_ADC (LDO4)"; }; - LDO5 { + reg_vdd_sdio: LDO5 { regulator-max-microvolt = <3300000>; regulator-min-microvolt = <1800000>; regulator-name = "On-module +V3.3_1.8_SD (LDO5)"; @@ -885,6 +885,7 @@ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>; pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_cd_sleep>; vmmc-supply = <®_usdhc2_vmmc>; + vqmmc-supply = <®_vdd_sdio>; }; /* On-module eMMC */ diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 76c73daf546b..9ab9c057f41e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -1636,8 +1636,10 @@ <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>, <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>; clock-names = "pclk", "wrap", "phy", "axi"; - assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM1_PIX>; - assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>; + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM1_PIX>, + <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>, + <&clk IMX8MP_CLK_24M>; assigned-clock-rates = <500000000>; power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>; status = "disabled"; @@ -1670,8 +1672,10 @@ <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>, <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>; clock-names = "pclk", "wrap", "phy", "axi"; - assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM2_PIX>; - assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>; + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM1_PIX>, + <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>, + <&clk IMX8MP_CLK_24M>; assigned-clock-rates = <266000000>; power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_2>; status = "disabled"; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts index b302daca4ce6..0165f3a25985 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts @@ -28,18 +28,6 @@ id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; }; - pcie0_refclk: pcie0-refclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - }; - - pcie1_refclk: pcie1-refclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - }; - reg_otg_vbus: regulator-otg-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -103,23 +91,24 @@ gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; }; +/* PCIe slot on X36 */ &pcie0 { reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>; clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>, - <&pcie0_refclk>, - <&clk IMX8MQ_CLK_PCIE1_PHY>, + <&pcieclk 3>, + <&pcieclk 2>, <&clk IMX8MQ_CLK_PCIE1_AUX>; status = "okay"; }; /* - * miniPCIe, also usable for cards with USB. Therefore configure the reset as + * miniPCIe on X28, also usable for cards with USB. Therefore configure the reset as * static gpio hog. */ &pcie1 { clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>, - <&pcie1_refclk>, - <&clk IMX8MQ_CLK_PCIE2_PHY>, + <&pcieclk 1>, + <&pcieclk 0>, <&clk IMX8MQ_CLK_PCIE2_AUX>; status = "okay"; }; @@ -171,6 +160,7 @@ }; &usb3_phy1 { + vbus-supply = <®_hub_vbus>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval-v1.2.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval-v1.2.dts new file mode 100644 index 000000000000..8466a8204ed0 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval-v1.2.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2024 Toradex + */ + +/dts-v1/; + +#include "imx8qm-apalis.dtsi" +#include "imx8-apalis-eval-v1.2.dtsi" + +/ { + model = "Toradex Apalis iMX8QM/QP on Apalis Evaluation Board V1.2"; + compatible = "toradex,apalis-imx8-eval-v1.2", + "toradex,apalis-imx8", + "fsl,imx8qm"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts index 5ab0921eb599..b0ebf6d05450 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts +++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts @@ -6,7 +6,7 @@ /dts-v1/; #include "imx8qm-apalis.dtsi" -#include "imx8-apalis-eval.dtsi" +#include "imx8-apalis-eval-v1.1.dtsi" / { model = "Toradex Apalis iMX8QM/QP on Apalis Evaluation Board"; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval-v1.2.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval-v1.2.dts new file mode 100644 index 000000000000..92c0ae0c0337 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval-v1.2.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2024 Toradex + */ + +/dts-v1/; + +#include "imx8qm-apalis-v1.1.dtsi" +#include "imx8-apalis-eval-v1.2.dtsi" + +/ { + model = "Toradex Apalis iMX8QM V1.1 on Apalis Evaluation Board V1.2"; + compatible = "toradex,apalis-imx8-v1.1-eval-v1.2", + "toradex,apalis-imx8-v1.1", + "fsl,imx8qm"; +}; + +/* Apalis MMC1 */ +&usdhc2 { + /delete-property/ no-1-8-v; +}; + +/* Apalis SD1 */ +&usdhc3 { + /delete-property/ no-1-8-v; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts index c8ff75831556..c998e542f93c 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts +++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts @@ -6,7 +6,7 @@ /dts-v1/; #include "imx8qm-apalis-v1.1.dtsi" -#include "imx8-apalis-eval.dtsi" +#include "imx8-apalis-eval-v1.1.dtsi" / { model = "Toradex Apalis iMX8QM V1.1 on Apalis Evaluation Board"; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts index 6d50838ad17d..77ac0efdfaad 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts @@ -41,6 +41,18 @@ }; }; +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&lsio_gpio0 14 GPIO_ACTIVE_HIGH>; + sda-gpios = <&lsio_gpio0 15 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + &lpuart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart0>; @@ -104,6 +116,20 @@ }; &iomuxc { + pinctrl_i2c1: i2c1grp { + fsl,pins = < + IMX8QM_GPT0_CLK_DMA_I2C1_SCL 0x0600004c + IMX8QM_GPT0_CAPTURE_DMA_I2C1_SDA 0x0600004c + >; + }; + + pinctrl_i2c1_gpio: i2c1gpio-grp { + fsl,pins = < + IMX8QM_GPT0_CLK_LSIO_GPIO0_IO14 0xc600004c + IMX8QM_GPT0_CAPTURE_LSIO_GPIO0_IO15 0xc600004c + >; + }; + pinctrl_fec1: fec1grp { fsl,pins = < IMX8QM_ENET0_MDC_CONN_ENET0_MDC 0x06000020 diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi index ec1639174e2e..545e175c88b3 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi @@ -6,20 +6,25 @@ &fec1 { compatible = "fsl,imx8qm-fec", "fsl,imx6sx-fec"; + iommus = <&smmu 0x12 0x7f80>; }; &fec2 { compatible = "fsl,imx8qm-fec", "fsl,imx6sx-fec"; + iommus = <&smmu 0x12 0x7f80>; }; &usdhc1 { compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; + iommus = <&smmu 0x11 0x7f80>; }; &usdhc2 { compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; + iommus = <&smmu 0x11 0x7f80>; }; &usdhc3 { compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; + iommus = <&smmu 0x11 0x7f80>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi index 69cb8676732e..11626fae5f97 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi @@ -17,6 +17,32 @@ power-domains = <&pd IMX_SC_R_UART_4>; }; + i2c4: i2c@5a840000 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x5a840000 0x4000>; + interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&i2c4_lpcg 0>, + <&i2c4_lpcg 1>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX_SC_R_I2C_4 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_I2C_4>; + status = "disabled"; + }; + + i2c4_lpcg: clock-controller@5ac40000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5ac40000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_I2C_4 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "i2c4_lpcg_clk", + "i2c4_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_I2C_4>; + }; + can1_lpcg: clock-controller@5ace0000 { compatible = "fsl,imx8qxp-lpcg"; reg = <0x5ace0000 0x10000>; @@ -96,15 +122,30 @@ status = "okay"; }; +/* It is eDMA1 in 8QM RM, but 8QXP it is eDMA3 */ &edma3 { + reg = <0x5a9f0000 0x210000>; + dma-channels = <10>; + interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd IMX_SC_R_DMA_1_CH0>, - <&pd IMX_SC_R_DMA_1_CH1>, - <&pd IMX_SC_R_DMA_1_CH2>, - <&pd IMX_SC_R_DMA_1_CH3>, - <&pd IMX_SC_R_DMA_1_CH4>, - <&pd IMX_SC_R_DMA_1_CH5>, - <&pd IMX_SC_R_DMA_1_CH6>, - <&pd IMX_SC_R_DMA_1_CH7>; + <&pd IMX_SC_R_DMA_1_CH1>, + <&pd IMX_SC_R_DMA_1_CH2>, + <&pd IMX_SC_R_DMA_1_CH3>, + <&pd IMX_SC_R_DMA_1_CH4>, + <&pd IMX_SC_R_DMA_1_CH5>, + <&pd IMX_SC_R_DMA_1_CH6>, + <&pd IMX_SC_R_DMA_1_CH7>, + <&pd IMX_SC_R_DMA_1_CH8>, + <&pd IMX_SC_R_DMA_1_CH9>; }; &flexcan1 { diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi index 31744fc1ab08..b3d01677b70c 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi @@ -265,6 +265,47 @@ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */ }; + smmu: iommu@51400000 { + compatible = "arm,mmu-500"; + interrupt-parent = <&gic>; + reg = <0 0x51400000 0 0x40000>; + #global-interrupts = <1>; + #iommu-cells = <2>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + }; + system-controller { compatible = "fsl,imx-scu"; mbox-names = "tx0", diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqp-mba8xx.dts b/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqp-mba8xx.dts new file mode 100644 index 000000000000..7d2e98bf8bc5 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqp-mba8xx.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR X11) +/* + * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +/dts-v1/; + +#include "imx8qxp-tqma8xqp.dtsi" +#include "mba8xx.dtsi" + +/ { + model = "TQ-Systems i.MX8QXP TQMa8XQP on MBa8Xx"; + compatible = "tq,imx8qxp-tqma8xqp-mba8xx", "tq,imx8qxp-tqma8xqp", "fsl,imx8qxp"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqp.dtsi new file mode 100644 index 000000000000..b14040bf4ddd --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqp.dtsi @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR X11) +/* + * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +#include "imx8qxp.dtsi" +#include "tqma8xx.dtsi" + +/ { + model = "TQ-Systems i.MX8QXP TQMa8XQP"; + compatible = "tq,imx8qxp-tqma8xqp", "fsl,imx8qxp"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index 958267b33340..10e16d84c0c3 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -260,6 +260,13 @@ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */ }; + clk_dummy: clock-dummy { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "clk_dummy"; + }; + xtal32k: clock-xtal32k { compatible = "fixed-clock"; #clock-cells = <0>; @@ -310,6 +317,7 @@ /* sorted in register address */ #include "imx8-ss-img.dtsi" #include "imx8-ss-vpu.dtsi" + #include "imx8-ss-gpu0.dtsi" #include "imx8-ss-adma.dtsi" #include "imx8-ss-conn.dtsi" #include "imx8-ss-ddr.dtsi" diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts index 69dd8e31027c..24bb253b938d 100644 --- a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts @@ -37,7 +37,7 @@ no-map; }; - rsc_table: rsc-table@1fff8000{ + rsc_table: rsc-table@1fff8000 { reg = <0 0x1fff8000 0 0x1000>; no-map; }; diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts new file mode 100644 index 000000000000..85fb188b057f --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023 PHYTEC Messtechnik GmbH + * Author: Wadim Egorov <w.egorov@phytec.de>, Christoph Stoidner <c.stoidner@phytec.de> + * Copyright (C) 2024 Mathieu Othacehe <m.othacehe@gmail.com> + * + * Product homepage: + * phyBOARD-Segin carrier board is reused for the i.MX93 design. + * https://www.phytec.eu/en/produkte/single-board-computer/phyboard-segin-imx6ul/ + */ +/dts-v1/; + +#include "imx93-phycore-som.dtsi" + +/{ + model = "PHYTEC phyBOARD-Segin-i.MX93"; + compatible = "phytec,imx93-phyboard-segin", "phytec,imx93-phycore-som", + "fsl,imx93"; + + chosen { + stdout-path = &lpuart1; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "VCC_SD"; + }; +}; + +/* Console */ +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* eMMC */ +&usdhc1 { + no-1-8-v; +}; + +/* SD-Card */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2_default>, <&pinctrl_usdhc2_cd>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>; + bus-width = <4>; + cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + no-mmc; + no-sdio; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&iomuxc { + pinctrl_uart1: uart1grp { + fsl,pins = < + MX93_PAD_UART1_RXD__LPUART1_RX 0x31e + MX93_PAD_UART1_TXD__LPUART1_TX 0x30e + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e + >; + }; + + pinctrl_usdhc2_cd: usdhc2cdgrp { + fsl,pins = < + MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e + >; + }; + + pinctrl_usdhc2_default: usdhc2grp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x179e + MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x138e + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x138e + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x138e + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x139e + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x179e + MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x138e + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x138e + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x139e + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x139e + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x178e + MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x139e + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x139e + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x139e + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x139e + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi new file mode 100644 index 000000000000..88c2657b50e6 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi @@ -0,0 +1,126 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023 PHYTEC Messtechnik GmbH + * Author: Wadim Egorov <w.egorov@phytec.de>, Christoph Stoidner <c.stoidner@phytec.de> + * Copyright (C) 2024 Mathieu Othacehe <m.othacehe@gmail.com> + * + * Product homepage: + * https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/ + */ + +#include <dt-bindings/leds/common.h> + +#include "imx93.dtsi" + +/{ + model = "PHYTEC phyCORE-i.MX93"; + compatible = "phytec,imx93-phycore-som", "fsl,imx93"; + + reserved-memory { + ranges; + #address-cells = <2>; + #size-cells = <2>; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + alloc-ranges = <0 0x80000000 0 0x40000000>; + size = <0 0x10000000>; + linux,cma-default; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +/* Ethernet */ +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + fsl,magic-packet; + assigned-clocks = <&clk IMX93_CLK_ENET_TIMER1>, + <&clk IMX93_CLK_ENET_REF>, + <&clk IMX93_CLK_ENET_REF_PHY>; + assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>, + <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>, + <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>; + assigned-clock-rates = <100000000>, <50000000>, <50000000>; + status = "okay"; + + mdio: mdio { + clock-frequency = <5000000>; + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; +}; + +/* eMMC */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +/* Watchdog */ +&wdog3 { + status = "okay"; +}; + +&iomuxc { + pinctrl_fec: fecgrp { + fsl,pins = < + MX93_PAD_ENET2_MDC__ENET1_MDC 0x50e + MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x502 + MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e + MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e + MX93_PAD_ENET2_RXC__ENET1_RX_ER 0x5fe + MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e + MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x50e + MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x50e + MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x50e + MX93_PAD_ENET2_TD2__ENET1_TX_CLK 0x4000050e + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX93_PAD_I2C1_SDA__GPIO1_IO01 0x31e + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX93_PAD_SD1_CLK__USDHC1_CLK 0x179e + MX93_PAD_SD1_CMD__USDHC1_CMD 0x1386 + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x138e + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x1386 + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x138e + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x1386 + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x1386 + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x1386 + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x1386 + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x1386 + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x179e + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi b/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi index f6e422dc2663..9d2328c185c9 100644 --- a/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi @@ -122,10 +122,8 @@ /* protectable identification memory (part of M24C64-D @57) */ eeprom@5f { - compatible = "st,24c64", "atmel,24c64"; + compatible = "atmel,24c64d-wl"; reg = <0x5f>; - size = <32>; - pagesize = <32>; vcc-supply = <®_v3v3>; }; diff --git a/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts new file mode 100644 index 000000000000..576d6982a4a0 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts @@ -0,0 +1,351 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2021 NXP + * Copyright 2023 Variscite Ltd. + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include "imx93-var-som.dtsi" + +/{ + model = "Variscite VAR-SOM-MX93 on Symphony evaluation board"; + compatible = "variscite,var-som-mx93-symphony", + "variscite,var-som-mx93", "fsl,imx93"; + + aliases { + ethernet0 = &eqos; + ethernet1 = &fec; + }; + + chosen { + stdout-path = &lpuart1; + }; + + /* + * Needed only for Symphony <= v1.5 + */ + reg_fec_phy: regulator-fec-phy { + compatible = "regulator-fixed"; + regulator-name = "fec-phy"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <20000>; + gpio = <&pca9534 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 18 GPIO_ACTIVE_HIGH>; + off-on-delay-us = <20000>; + enable-active-high; + }; + + reg_vref_1v8: regulator-adc-vref { + compatible = "regulator-fixed"; + regulator-name = "vref_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ethosu_mem: ethosu-region@88000000 { + compatible = "shared-dma-pool"; + reusable; + reg = <0x0 0x88000000 0x0 0x8000000>; + }; + + vdev0vring0: vdev0vring0@87ee0000 { + reg = <0 0x87ee0000 0 0x8000>; + no-map; + }; + + vdev0vring1: vdev0vring1@87ee8000 { + reg = <0 0x87ee8000 0 0x8000>; + no-map; + }; + + vdev1vring0: vdev1vring0@87ef0000 { + reg = <0 0x87ef0000 0 0x8000>; + no-map; + }; + + vdev1vring1: vdev1vring1@87ef8000 { + reg = <0 0x87ef8000 0 0x8000>; + no-map; + }; + + rsc_table: rsc-table@2021f000 { + reg = <0 0x2021f000 0 0x1000>; + no-map; + }; + + vdevbuffer: vdevbuffer@87f00000 { + compatible = "shared-dma-pool"; + reg = <0 0x87f00000 0 0x100000>; + no-map; + }; + + ele_reserved: ele-reserved@87de0000 { + compatible = "shared-dma-pool"; + reg = <0 0x87de0000 0 0x100000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-back { + label = "Back"; + gpios = <&pca9534 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + }; + + key-home { + label = "Home"; + gpios = <&pca9534 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + }; + + key-menu { + label = "Menu"; + gpios = <&pca9534 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_MENU>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pca9534 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +/* Use external instead of internal RTC*/ +&bbnsm_rtc { + status = "disabled"; +}; + +&eqos { + mdio { + ethphy1: ethernet-phy@5 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <5>; + qca,disable-smarteee; + eee-broken-1000t; + reset-gpios = <&pca9534 5 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <20000>; + vddio-supply = <&vddio1>; + + vddio1: vddio-regulator { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rgmii"; + phy-handle = <ðphy1>; + phy-supply = <®_fec_phy>; + status = "okay"; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&lpi2c1 { + clock-frequency = <400000>; + pinctrl-names = "default", "sleep", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c1>; + pinctrl-1 = <&pinctrl_lpi2c1_gpio>; + pinctrl-2 = <&pinctrl_lpi2c1_gpio>; + scl-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + status = "okay"; + + /* DS1337 RTC module */ + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; +}; + +&lpi2c5 { + clock-frequency = <400000>; + pinctrl-names = "default", "sleep", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c5>; + pinctrl-1 = <&pinctrl_lpi2c5_gpio>; + pinctrl-2 = <&pinctrl_lpi2c5_gpio>; + scl-gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + status = "okay"; + + pca9534: gpio@20 { + compatible = "nxp,pca9534"; + reg = <0x20>; + gpio-controller; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pca9534>; + interrupt-parent = <&gpio3>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + #gpio-cells = <2>; + wakeup-source; + }; +}; + +/* Console */ +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* J18.7, J18.9 */ +&lpuart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + status = "okay"; +}; + +/* SD */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + bus-width = <4>; + status = "okay"; + no-sdio; + no-mmc; +}; + +/* Watchdog */ +&wdog3 { + status = "okay"; +}; + +&iomuxc { + pinctrl_fec: fecgrp { + fsl,pins = < + MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e + MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e + MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e + MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e + MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x5fe + MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e + MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x57e + MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x57e + MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x57e + MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x57e + MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x5fe + MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x57e + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX93_PAD_PDM_CLK__CAN1_TX 0x139e + MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x139e + >; + }; + + pinctrl_lpi2c1: lpi2c1grp { + fsl,pins = < + MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e + MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e + >; + }; + + pinctrl_lpi2c1_gpio: lpi2c1gpiogrp { + fsl,pins = < + MX93_PAD_I2C1_SCL__GPIO1_IO00 0x31e + MX93_PAD_I2C1_SDA__GPIO1_IO01 0x31e + >; + }; + + pinctrl_lpi2c5: lpi2c5grp { + fsl,pins = < + MX93_PAD_GPIO_IO23__LPI2C5_SCL 0x40000b9e + MX93_PAD_GPIO_IO22__LPI2C5_SDA 0x40000b9e + >; + }; + + pinctrl_lpi2c5_gpio: lpi2c5gpiogrp { + fsl,pins = < + MX93_PAD_GPIO_IO23__GPIO2_IO23 0x31e + MX93_PAD_GPIO_IO22__GPIO2_IO22 0x31e + >; + }; + + pinctrl_pca9534: pca9534grp { + fsl,pins = < + MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x31e + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX93_PAD_UART1_RXD__LPUART1_RX 0x31e + MX93_PAD_UART1_TXD__LPUART1_TX 0x31e + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX93_PAD_GPIO_IO05__LPUART6_RX 0x31e + MX93_PAD_GPIO_IO04__LPUART6_TX 0x31e + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX93_PAD_GPIO_IO18__GPIO2_IO18 0x31e + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe + MX93_PAD_SD2_CMD__USDHC2_CMD 0x13fe + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi new file mode 100644 index 000000000000..783938245e4f --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi @@ -0,0 +1,110 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 NXP + * Copyright 2023 Variscite Ltd. + */ + +/dts-v1/; + +#include "imx93.dtsi" + +/{ + model = "Variscite VAR-SOM-MX93 module"; + compatible = "variscite,var-som-mx93", "fsl,imx93"; + + mmc_pwrseq: mmc-pwrseq { + compatible = "mmc-pwrseq-simple"; + post-power-on-delay-ms = <100>; + power-off-delay-us = <10000>; + reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>, /* WIFI_RESET */ + <&gpio3 7 GPIO_ACTIVE_LOW>; /* WIFI_PWR_EN */ + }; + + reg_eqos_phy: regulator-eqos-phy { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_eqos_phy>; + regulator-name = "eth_phy_pwr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100000>; + regulator-always-on; + }; +}; + +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rgmii"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <1000000>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + eee-broken-1000t; + }; + }; +}; + +/* eMMC */ +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1>; + pinctrl-2 = <&pinctrl_usdhc1>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&iomuxc { + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x57e + MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x57e + MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e + MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e + MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e + MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e + MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x5fe + MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e + MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x57e + MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x57e + MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x57e + MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x57e + MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x5fe + MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x57e + >; + }; + + pinctrl_reg_eqos_phy: regeqosgrp { + fsl,pins = < + MX93_PAD_UART2_TXD__GPIO1_IO07 0x51e + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe + MX93_PAD_SD1_CMD__USDHC1_CMD 0x13fe + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index 8f2e7c42ad6e..601c94e1fac8 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -294,7 +294,7 @@ status = "disabled"; }; - i3c1: i3c-master@44330000 { + i3c1: i3c@44330000 { compatible = "silvaco,i3c-master-v1"; reg = <0x44330000 0x10000>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; @@ -671,7 +671,7 @@ status = "disabled"; }; - i3c2: i3c-master@42520000 { + i3c2: i3c@42520000 { compatible = "silvaco,i3c-master-v1"; reg = <0x42520000 0x10000>; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi index e2bc53b8d39a..427467df42bf 100644 --- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi +++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi @@ -29,6 +29,12 @@ stdout-path = &uart3; }; + clk_xtal25: clk-xtal25 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -100,12 +106,6 @@ }; }; - pcie0_refclk: pcie0-refclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - }; - reg_12v: regulator-12v { compatible = "regulator-fixed"; regulator-name = "MBA8MX_12V"; @@ -219,7 +219,7 @@ line-name = "BOOT_CFG_OE#"; }; - rst-usb-hub-hog { + rst_usb_hub_hog: rst-usb-hub-hog { gpio-hog; gpios = <13 0>; output-high; @@ -264,6 +264,13 @@ pagesize = <16>; vcc-supply = <®_vcc_3v3>; }; + + pcieclk: clk@68 { + compatible = "renesas,9fgv0441"; + reg = <0x68>; + clocks = <&clk_xtal25>; + #clock-cells = <1>; + }; }; &i2c3 { diff --git a/arch/arm64/boot/dts/freescale/mba8xx.dtsi b/arch/arm64/boot/dts/freescale/mba8xx.dtsi new file mode 100644 index 000000000000..276d1683b03b --- /dev/null +++ b/arch/arm64/boot/dts/freescale/mba8xx.dtsi @@ -0,0 +1,554 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR X11) +/* + * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/net/ti-dp83867.h> + +/ { + adc { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>; + }; + + aliases { + rtc0 = &pcf85063; + rtc1 = &rtc; + }; + + backlight_lvds: backlight-lvds { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bl_lvds>; + pwms = <&adma_pwm 0 5000000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_12v0>; + enable-gpios = <&lsio_gpio1 30 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + chosen { + stdout-path = &lpuart1; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiobuttons>; + autorepeat; + + switch-a { + label = "switcha"; + linux,code = <BTN_0>; + gpios = <&lsio_gpio1 13 GPIO_ACTIVE_LOW>; + }; + + switch-b { + label = "switchb"; + linux,code = <BTN_1>; + gpios = <&lsio_gpio1 14 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + gpios = <&expander 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led2 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&expander 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + /* TODO LVDS panels */ + + reg_12v0: regulator-12v0 { + compatible = "regulator-fixed"; + regulator-name = "V_12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&expander 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_pcie_1v5: regulator-pcie-1v5 { + compatible = "regulator-fixed"; + regulator-name = "MBA8XX_PCIE_1V5"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_pcie_1v5>; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&lsio_gpio0 30 GPIO_ACTIVE_HIGH>; + startup-delay-us = <1000>; + enable-active-high; + }; + + reg_pcie_3v3: regulator-pcie-3v3 { + compatible = "regulator-fixed"; + regulator-name = "MBA8XX_PCIE_3V3"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_pcie_3v3>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>; + startup-delay-us = <1000>; + enable-active-high; + regulator-always-on; + }; + + reg_3v3_mb: regulator-usdhc2-vmmc { + compatible = "regulator-fixed"; + regulator-name = "V_3V3_MB"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + sound { + compatible = "fsl,imx-audio-tlv320aic32x4"; + model = "tqm-tlv320aic32"; + audio-codec = <&tlv320aic3x04>; + ssi-controller = <&sai1>; + }; +}; + +&adc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0>; + vref-supply = <®_1v8>; + #io-channel-cells = <1>; + status = "okay"; +}; + +&adma_pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_admapwm>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ethphy0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,dp83867-rxctrl-strap-quirk; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + reset-gpios = <&lsio_gpio3 2 GPIO_ACTIVE_LOW>; + reset-assert-us = <500000>; + reset-deassert-us = <50000>; + enet-phy-lane-no-swap; + interrupt-parent = <&lsio_gpio3>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + }; + + ethphy3: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ethphy3>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,dp83867-rxctrl-strap-quirk; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + reset-gpios = <&lsio_gpio3 3 GPIO_ACTIVE_LOW>; + reset-assert-us = <500000>; + reset-deassert-us = <50000>; + enet-phy-lane-no-swap; + interrupt-parent = <&lsio_gpio3>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + }; + }; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec2>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy3>; + status = "okay"; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0>; + xceiver-supply = <®_3v3>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + xceiver-supply = <®_3v3>; + status = "okay"; +}; + +&i2c1 { + tlv320aic3x04: audio-codec@18 { + compatible = "ti,tlv320aic32x4"; + reg = <0x18>; + clocks = <&mclkout0_lpcg 0>; + clock-names = "mclk"; + iov-supply = <®_1v8>; + ldoin-supply = <®_3v3>; + }; + + se97b_1c: temperature-sensor@1c { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; + reg = <0x1c>; + }; + + at24c02_54: eeprom@54 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x54>; + pagesize = <16>; + vcc-supply = <®_3v3>; + }; + + expander: gpio@70 { + compatible = "nxp,pca9538"; + reg = <0x70>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pca9538>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&lsio_gpio4>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + vcc-supply = <®_1v8>; + + gpio-line-names = "", "LED_A", + "LED_B", "", + "DSI_EN", "USB_RESET#", + "V_12V_EN", "PCIE_DIS#"; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c2>; + pinctrl-1 = <&pinctrl_lpi2c2gpio>; + scl-gpios = <&lsio_gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&lsio_gpio2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +/* TODO LDB */ + +&lpspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + cs-gpios = <&lsio_gpio0 27 GPIO_ACTIVE_LOW>, <&lsio_gpio0 29 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&lpspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2>; + cs-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&lpspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi3>; + num-cs = <2>; + cs-gpios = <&lsio_gpio0 16 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart1>; + status = "okay"; +}; + +&lpuart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart3>; + status = "okay"; +}; + +&lsio_gpio3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lsgpio3>; + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "X4_15", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +/* TODO: Mini-PCIe */ + +&sai1 { + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&sai1_lpcg 0>; + assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + srp-disable; + hnp-disable; + adp-disable; + power-active-high; + over-current-active-low; + dr_mode = "otg"; + status = "okay"; +}; + +&usbotg3 { + status = "okay"; +}; + +&usbotg3_cdns3 { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + bus-width = <4>; + cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>; + wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_3v3_mb>; + no-1-8-v; + no-sdio; + no-mmc; + status = "okay"; +}; + +&iomuxc { + pinctrl_adc0: adc0grp { + fsl,pins = <IMX8QXP_ADC_IN0_ADMA_ADC_IN0 0x02000060>, + <IMX8QXP_ADC_IN1_ADMA_ADC_IN1 0x02000060>, + <IMX8QXP_ADC_IN2_ADMA_ADC_IN2 0x02000060>, + <IMX8QXP_ADC_IN3_ADMA_ADC_IN3 0x02000060>; + }; + + pinctrl_admapwm: admapwmgrp { + fsl,pins = <IMX8QXP_SPI0_CS1_ADMA_LCD_PWM0_OUT 0x00000021>; + }; + + pinctrl_bl_lvds: bllvdsgrp { + fsl,pins = <IMX8QXP_MIPI_DSI1_I2C0_SDA_LSIO_GPIO1_IO30 0x00000021>; + }; + + pinctrl_can0: can0grp { + fsl,pins = <IMX8QXP_UART0_RX_ADMA_FLEXCAN0_RX 0x00000021>, + <IMX8QXP_UART0_TX_ADMA_FLEXCAN0_TX 0x00000021>; + }; + + pinctrl_can1: can1grp { + fsl,pins = <IMX8QXP_UART2_RX_ADMA_FLEXCAN1_RX 0x00000021>, + <IMX8QXP_UART2_TX_ADMA_FLEXCAN1_TX 0x00000021>; + }; + + pinctrl_ethphy0: ethphy0grp { + fsl,pins = <IMX8QXP_CSI_EN_LSIO_GPIO3_IO02 0x00000040>, + <IMX8QXP_CSI_PCLK_LSIO_GPIO3_IO00 0x00000040>; + }; + + pinctrl_ethphy3: ethphy3grp { + fsl,pins = <IMX8QXP_CSI_RESET_LSIO_GPIO3_IO03 0x00000040>, + <IMX8QXP_CSI_MCLK_LSIO_GPIO3_IO01 0x00000040>; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = <IMX8QXP_ENET0_MDC_CONN_ENET0_MDC 0x06000041>, + <IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO 0x06000041>, + <IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x00000040>, + <IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x00000040>, + <IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x00000040>, + <IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x00000040>, + <IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x00000040>, + <IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x00000040>, + <IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x00000040>, + <IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x00000040>, + <IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x00000040>, + <IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x00000040>, + <IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x00000040>, + <IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x00000040>; + }; + + pinctrl_fec2: fec2grp { + fsl,pins = <IMX8QXP_ESAI0_SCKR_CONN_ENET1_RGMII_TX_CTL 0x00000040>, + <IMX8QXP_ESAI0_FSR_CONN_ENET1_RGMII_TXC 0x00000040>, + <IMX8QXP_ESAI0_TX4_RX1_CONN_ENET1_RGMII_TXD0 0x00000040>, + <IMX8QXP_ESAI0_TX5_RX0_CONN_ENET1_RGMII_TXD1 0x00000040>, + <IMX8QXP_ESAI0_FST_CONN_ENET1_RGMII_TXD2 0x00000040>, + <IMX8QXP_ESAI0_SCKT_CONN_ENET1_RGMII_TXD3 0x00000040>, + <IMX8QXP_ESAI0_TX0_CONN_ENET1_RGMII_RXC 0x00000040>, + <IMX8QXP_SPDIF0_TX_CONN_ENET1_RGMII_RX_CTL 0x00000040>, + <IMX8QXP_SPDIF0_RX_CONN_ENET1_RGMII_RXD0 0x00000040>, + <IMX8QXP_ESAI0_TX3_RX2_CONN_ENET1_RGMII_RXD1 0x00000040>, + <IMX8QXP_ESAI0_TX2_RX3_CONN_ENET1_RGMII_RXD2 0x00000040>, + <IMX8QXP_ESAI0_TX1_CONN_ENET1_RGMII_RXD3 0x00000040>; + }; + + pinctrl_gpiobuttons: gpiobuttonsgrp { + fsl,pins = <IMX8QXP_ADC_IN5_LSIO_GPIO1_IO13 0x00000020>, + <IMX8QXP_ADC_IN4_LSIO_GPIO1_IO14 0x00000020>; + }; + + pinctrl_lpi2c2: lpi2c2grp { + fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_00_ADMA_I2C2_SCL 0x06000021>, + <IMX8QXP_MIPI_DSI1_GPIO0_01_ADMA_I2C2_SDA 0x06000021>; + }; + + pinctrl_lpi2c2gpio: lpi2c2gpiogrp { + fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_00_LSIO_GPIO1_IO31 0x06000021>, + <IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00 0x06000021>; + }; + + pinctrl_lpuart1: lpuart1grp { + fsl,pins = <IMX8QXP_UART1_RX_ADMA_UART1_RX 0x06000020>, + <IMX8QXP_UART1_TX_ADMA_UART1_TX 0x06000020>; + }; + + pinctrl_lpuart3: lpuart3grp { + fsl,pins = <IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX 0x06000020>, + <IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX 0x06000020>; + }; + + pinctrl_lsgpio3: lsgpio3grp { + fsl,pins = <IMX8QXP_QSPI0A_SS1_B_LSIO_GPIO3_IO15 0x00000021>; + }; + + pinctrl_pca9538: pca9538grp { + fsl,pins = <IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19 0x00000020>; + }; + + pinctrl_pcieb: pcieagrp { + fsl,pins = <IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00 0x06000041>, + <IMX8QXP_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01 0x06000041>, + <IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02 0x04000041>; + }; + + pinctrl_reg_pcie_1v5: regpcie1v5grp { + fsl,pins = <IMX8QXP_SAI1_RXC_LSIO_GPIO0_IO30 0x00000021>; + }; + + pinctrl_reg_pcie_3v3: regpcie3v3grp { + fsl,pins = <IMX8QXP_SAI1_RXFS_LSIO_GPIO0_IO31 0x00000021>; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = <IMX8QXP_MCLK_OUT0_ADMA_ACM_MCLK_OUT0 0x06000041>, + <IMX8QXP_FLEXCAN0_RX_ADMA_SAI1_TXC 0x06000041>, + <IMX8QXP_FLEXCAN0_TX_ADMA_SAI1_TXFS 0x06000041>, + <IMX8QXP_FLEXCAN1_RX_ADMA_SAI1_TXD 0x06000041>, + <IMX8QXP_FLEXCAN1_TX_ADMA_SAI1_RXD 0x06000041>; + }; + + pinctrl_spi1: spi1grp { + fsl,pins = <IMX8QXP_SAI0_TXC_ADMA_SPI1_SDI 0x00000041>, + <IMX8QXP_SAI0_TXD_ADMA_SPI1_SDO 0x00000041>, + <IMX8QXP_SAI0_TXFS_ADMA_SPI1_SCK 0x00000041>, + <IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27 0x00000021>, + <IMX8QXP_SAI1_RXD_LSIO_GPIO0_IO29 0x00000021>; + }; + + pinctrl_spi2: spi2grp { + fsl,pins = <IMX8QXP_SPI2_SCK_ADMA_SPI2_SCK 0x00000041>, + <IMX8QXP_SPI2_SDI_ADMA_SPI2_SDI 0x00000041>, + <IMX8QXP_SPI2_SDO_ADMA_SPI2_SDO 0x00000041>, + <IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00 0x00000021>; + }; + + pinctrl_spi3: spi3grp { + fsl,pins = <IMX8QXP_SPI3_SCK_ADMA_SPI3_SCK 0x00000041>, + <IMX8QXP_SPI3_SDI_ADMA_SPI3_SDI 0x00000041>, + <IMX8QXP_SPI3_SDO_ADMA_SPI3_SDO 0x00000041>, + <IMX8QXP_SPI3_CS0_LSIO_GPIO0_IO16 0x00000021>, + <IMX8QXP_SPI3_CS1_ADMA_SPI3_CS1 0x00000021>; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = <IMX8QXP_USB_SS3_TC0_CONN_USB_OTG1_PWR 0x00000021>, + <IMX8QXP_USB_SS3_TC2_CONN_USB_OTG1_OC 0x00000021>; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = <IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21 0x00000021>, + <IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22 0x00000021>; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041>, + <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021>, + <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021>, + <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021>, + <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021>, + <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021>, + <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021>; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000040>, + <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x00000020>, + <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000020>, + <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000020>, + <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000020>, + <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000020>, + <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000020>; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000040>, + <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x00000020>, + <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000020>, + <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000020>, + <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000020>, + <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000020>, + <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000020>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/tqma8xx.dtsi b/arch/arm64/boot/dts/freescale/tqma8xx.dtsi new file mode 100644 index 000000000000..d98469a7c47c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/tqma8xx.dtsi @@ -0,0 +1,265 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR X11) +/* + * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +/ { + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x40000000>; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "V_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "V_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * global autoconfigured region for contiguous allocations + * must not exceed memory size and region + */ + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0 0x20000000>; + alloc-ranges = <0 0x96000000 0 0x30000000>; + linux,cma-default; + }; + }; +}; + +/* TQMa8Xx only uses industrial grade, reduce trip points accordingly */ +&cpu_alert0 { + temperature = <95000>; +}; + +&cpu_crit0 { + temperature = <100000>; +}; +/* end of temperature grade adjustments */ + +&flexspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi0>; + status = "okay"; + + flash0: flash@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <66000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + }; +}; + +/* TODO GPU */ + +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c1>; + pinctrl-1 = <&pinctrl_lpi2c1gpio>; + scl-gpios = <&lsio_gpio1 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&lsio_gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + se97: temperature-sensor@1b { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; + reg = <0x1b>; + }; + + pcf85063: rtc@51 { + compatible = "nxp,pcf85063a"; + reg = <0x51>; + quartz-load-femtofarads = <7000>; + }; + + at24c02: eeprom@53 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + read-only; + vcc-supply = <®_3v3>; + }; + + m24c64: eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + pagesize = <32>; + vcc-supply = <®_3v3>; + }; +}; + +&mu_m0 { + status = "okay"; +}; + +&mu1_m0 { + status = "okay"; +}; + +&thermal_zones { + pmic_thermal: pmic-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tsens IMX_SC_R_PMIC_0>; + + trips { + pmic_alert0: trip0 { + temperature = <110000>; + hysteresis = <2000>; + type = "passive"; + }; + + pmic_crit0: trip1 { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&pmic_alert0>; + cooling-device = + <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vqmmc-supply = <®_1v8>; + vmmc-supply = <®_3v3>; + bus-width = <8>; + non-removable; + no-sdio; + no-sd; + status = "okay"; +}; + +&vpu { + compatible = "nxp,imx8qxp-vpu"; + status = "okay"; +}; + +&vpu_core0 { + memory-region = <&decoder_boot>, <&decoder_rpc>; + status = "okay"; +}; + +&vpu_core1 { + memory-region = <&encoder_boot>, <&encoder_rpc>; + status = "okay"; +}; + +&iomuxc { + pinctrl_flexspi0: flexspi0grp { + fsl,pins = < + IMX8QXP_QSPI0A_DATA0_LSIO_QSPI0A_DATA0 0x0600004d + IMX8QXP_QSPI0A_DATA1_LSIO_QSPI0A_DATA1 0x0600004d + IMX8QXP_QSPI0A_DATA2_LSIO_QSPI0A_DATA2 0x0600004d + IMX8QXP_QSPI0A_DATA3_LSIO_QSPI0A_DATA3 0x0600004d + IMX8QXP_QSPI0A_DQS_LSIO_QSPI0A_DQS 0x0600004d + IMX8QXP_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B 0x0600004d + IMX8QXP_QSPI0A_SCLK_LSIO_QSPI0A_SCLK 0x0600004d + IMX8QXP_QSPI0B_SCLK_LSIO_QSPI0B_SCLK 0x0600004d + IMX8QXP_QSPI0B_DATA0_LSIO_QSPI0B_DATA0 0x0600004d + IMX8QXP_QSPI0B_DATA1_LSIO_QSPI0B_DATA1 0x0600004d + IMX8QXP_QSPI0B_DATA2_LSIO_QSPI0B_DATA2 0x0600004d + IMX8QXP_QSPI0B_DATA3_LSIO_QSPI0B_DATA3 0x0600004d + IMX8QXP_QSPI0B_DQS_LSIO_QSPI0B_DQS 0x0600004d + IMX8QXP_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B 0x0600004d + IMX8QXP_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B 0x0600004d + >; + }; + + pinctrl_lpi2c1: lpi2c1grp { + fsl,pins = < + IMX8QXP_MIPI_DSI0_GPIO0_00_ADMA_I2C1_SCL 0x06000021 + IMX8QXP_MIPI_DSI0_GPIO0_01_ADMA_I2C1_SDA 0x06000021 + >; + }; + + pinctrl_lpi2c1gpio: lpi2c1gpiogrp { + fsl,pins = < + IMX8QXP_MIPI_DSI0_GPIO0_00_LSIO_GPIO1_IO27 0x06000021 + IMX8QXP_MIPI_DSI0_GPIO0_01_LSIO_GPIO1_IO28 0x06000021 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 + IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 + IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 + IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 + IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000040 + IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x00000020 + IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000020 + IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000020 + IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000020 + IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000020 + IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000020 + IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000020 + IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000020 + IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000020 + IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000040 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000040 + IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x00000020 + IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000020 + IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000020 + IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000020 + IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000020 + IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000020 + IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000020 + IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000020 + IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000020 + IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000040 + >; + }; +}; |