diff options
author | Manuel Lauss <manuel.lauss@gmail.com> | 2014-07-23 18:36:24 +0400 |
---|---|---|
committer | Ralf Baechle <ralf@linux-mips.org> | 2014-07-30 15:53:28 +0400 |
commit | 1d09de7dc76ef96a9a2c7c0244e20f12d68e6ef8 (patch) | |
tree | 929cb54b63224fc65d7b56d52b00a89bb236b9a0 /arch/mips | |
parent | 2ef1bb99116e49226e8bab8ebab255f12fa8a99e (diff) | |
download | linux-1d09de7dc76ef96a9a2c7c0244e20f12d68e6ef8.tar.xz |
MIPS: Alchemy: introduce helpers to access SYS register block.
This patch changes all absolute SYS_XY registers to offsets from the
SYS block base, prefixes them with AU1000 to avoid silent failures due
to changed addresses, and introduces helper functions to read/write
them.
No functional changes, comparing assembly of a few select functions shows
no differences.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/7464/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips')
-rw-r--r-- | arch/mips/alchemy/board-mtx1.c | 4 | ||||
-rw-r--r-- | arch/mips/alchemy/board-xxs1500.c | 4 | ||||
-rw-r--r-- | arch/mips/alchemy/common/clocks.c | 6 | ||||
-rw-r--r-- | arch/mips/alchemy/common/irq.c | 5 | ||||
-rw-r--r-- | arch/mips/alchemy/common/platform.c | 2 | ||||
-rw-r--r-- | arch/mips/alchemy/common/power.c | 26 | ||||
-rw-r--r-- | arch/mips/alchemy/common/time.c | 23 | ||||
-rw-r--r-- | arch/mips/alchemy/devboards/db1000.c | 5 | ||||
-rw-r--r-- | arch/mips/alchemy/devboards/db1200.c | 19 | ||||
-rw-r--r-- | arch/mips/alchemy/devboards/db1550.c | 10 | ||||
-rw-r--r-- | arch/mips/alchemy/devboards/pm.c | 39 | ||||
-rw-r--r-- | arch/mips/include/asm/mach-au1x00/au1000.h | 75 | ||||
-rw-r--r-- | arch/mips/include/asm/mach-au1x00/gpio-au1000.h | 56 |
13 files changed, 134 insertions, 140 deletions
diff --git a/arch/mips/alchemy/board-mtx1.c b/arch/mips/alchemy/board-mtx1.c index 25a59a23547e..1e3b102389ef 100644 --- a/arch/mips/alchemy/board-mtx1.c +++ b/arch/mips/alchemy/board-mtx1.c @@ -85,10 +85,10 @@ void __init board_setup(void) #endif /* IS_ENABLED(CONFIG_USB_OHCI_HCD) */ /* Initialize sys_pinfunc */ - au_writel(SYS_PF_NI2, SYS_PINFUNC); + alchemy_wrsys(SYS_PF_NI2, AU1000_SYS_PINFUNC); /* Initialize GPIO */ - au_writel(~0, KSEG1ADDR(AU1000_SYS_PHYS_ADDR) + SYS_TRIOUTCLR); + alchemy_wrsys(~0, AU1000_SYS_TRIOUTCLR); alchemy_gpio_direction_output(0, 0); /* Disable M66EN (PCI 66MHz) */ alchemy_gpio_direction_output(3, 1); /* Disable PCI CLKRUN# */ alchemy_gpio_direction_output(1, 1); /* Enable EXT_IO3 */ diff --git a/arch/mips/alchemy/board-xxs1500.c b/arch/mips/alchemy/board-xxs1500.c index 3fb814be0e91..0fc53e08a894 100644 --- a/arch/mips/alchemy/board-xxs1500.c +++ b/arch/mips/alchemy/board-xxs1500.c @@ -87,9 +87,9 @@ void __init board_setup(void) alchemy_gpio2_enable(); /* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */ - pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3; + pin_func = alchemy_rdsys(AU1000_SYS_PINFUNC) & ~SYS_PF_UR3; pin_func |= SYS_PF_UR3; - au_writel(pin_func, SYS_PINFUNC); + alchemy_wrsys(pin_func, AU1000_SYS_PINFUNC); /* Enable UART */ alchemy_uart_enable(AU1000_UART3_PHYS_ADDR); diff --git a/arch/mips/alchemy/common/clocks.c b/arch/mips/alchemy/common/clocks.c index f38298a8b98c..0e41416fa682 100644 --- a/arch/mips/alchemy/common/clocks.c +++ b/arch/mips/alchemy/common/clocks.c @@ -91,13 +91,13 @@ unsigned long au1xxx_calc_clock(void) if (au1xxx_cpu_has_pll_wo()) cpu_speed = 396000000; else - cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK; + cpu_speed = (alchemy_rdsys(AU1000_SYS_CPUPLL) & 0x3f) * AU1000_SRC_CLK; /* On Alchemy CPU:counter ratio is 1:1 */ mips_hpt_frequency = cpu_speed; /* Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16) */ - set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL) - & 0x03) + 2) * 16)); + set_au1x00_uart_baud_base(cpu_speed / (2 * + ((alchemy_rdsys(AU1000_SYS_POWERCTRL) & 0x03) + 2) * 16)); set_au1x00_speed(cpu_speed); diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c index 63a71817a00c..6cb60abfdcc9 100644 --- a/arch/mips/alchemy/common/irq.c +++ b/arch/mips/alchemy/common/irq.c @@ -389,13 +389,12 @@ static int au1x_ic1_setwake(struct irq_data *d, unsigned int on) return -EINVAL; local_irq_save(flags); - wakemsk = __raw_readl((void __iomem *)SYS_WAKEMSK); + wakemsk = alchemy_rdsys(AU1000_SYS_WAKEMSK); if (on) wakemsk |= 1 << bit; else wakemsk &= ~(1 << bit); - __raw_writel(wakemsk, (void __iomem *)SYS_WAKEMSK); - wmb(); + alchemy_wrsys(wakemsk, AU1000_SYS_WAKEMSK); local_irq_restore(flags); return 0; diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c index 9837a134a6d6..fb89d213523b 100644 --- a/arch/mips/alchemy/common/platform.c +++ b/arch/mips/alchemy/common/platform.c @@ -420,7 +420,7 @@ static void __init alchemy_setup_macs(int ctype) memcpy(au1xxx_eth1_platform_data.mac, ethaddr, 6); /* Register second MAC if enabled in pinfunc */ - if (!(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2)) { + if (!(alchemy_rdsys(AU1000_SYS_PINFUNC) & SYS_PF_NI2)) { ret = platform_device_register(&au1xxx_eth1_device); if (ret) printk(KERN_INFO "Alchemy: failed to register MAC1\n"); diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c index bdb28dee8fdd..2d3831b02091 100644 --- a/arch/mips/alchemy/common/power.c +++ b/arch/mips/alchemy/common/power.c @@ -54,14 +54,14 @@ static unsigned int sleep_static_memctlr[4][3]; static void save_core_regs(void) { /* Clocks and PLLs. */ - sleep_sys_clocks[0] = au_readl(SYS_FREQCTRL0); - sleep_sys_clocks[1] = au_readl(SYS_FREQCTRL1); - sleep_sys_clocks[2] = au_readl(SYS_CLKSRC); - sleep_sys_clocks[3] = au_readl(SYS_CPUPLL); - sleep_sys_clocks[4] = au_readl(SYS_AUXPLL); + sleep_sys_clocks[0] = alchemy_rdsys(AU1000_SYS_FREQCTRL0); + sleep_sys_clocks[1] = alchemy_rdsys(AU1000_SYS_FREQCTRL1); + sleep_sys_clocks[2] = alchemy_rdsys(AU1000_SYS_CLKSRC); + sleep_sys_clocks[3] = alchemy_rdsys(AU1000_SYS_CPUPLL); + sleep_sys_clocks[4] = alchemy_rdsys(AU1000_SYS_AUXPLL); /* pin mux config */ - sleep_sys_pinfunc = au_readl(SYS_PINFUNC); + sleep_sys_pinfunc = alchemy_rdsys(AU1000_SYS_PINFUNC); /* Save the static memory controller configuration. */ sleep_static_memctlr[0][0] = au_readl(MEM_STCFG0); @@ -85,16 +85,14 @@ static void restore_core_regs(void) * one of those Au1000 with a write-only PLL, where we dont * have a valid value) */ - au_writel(sleep_sys_clocks[0], SYS_FREQCTRL0); - au_writel(sleep_sys_clocks[1], SYS_FREQCTRL1); - au_writel(sleep_sys_clocks[2], SYS_CLKSRC); - au_writel(sleep_sys_clocks[4], SYS_AUXPLL); + alchemy_wrsys(sleep_sys_clocks[0], AU1000_SYS_FREQCTRL0); + alchemy_wrsys(sleep_sys_clocks[1], AU1000_SYS_FREQCTRL1); + alchemy_wrsys(sleep_sys_clocks[2], AU1000_SYS_CLKSRC); + alchemy_wrsys(sleep_sys_clocks[4], AU1000_SYS_AUXPLL); if (!au1xxx_cpu_has_pll_wo()) - au_writel(sleep_sys_clocks[3], SYS_CPUPLL); - au_sync(); + alchemy_wrsys(sleep_sys_clocks[3], AU1000_SYS_CPUPLL); - au_writel(sleep_sys_pinfunc, SYS_PINFUNC); - au_sync(); + alchemy_wrsys(sleep_sys_pinfunc, AU1000_SYS_PINFUNC); /* Restore the static memory controller configuration. */ au_writel(sleep_static_memctlr[0][0], MEM_STCFG0); diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c index 93fa586d52e2..50e17e13c18b 100644 --- a/arch/mips/alchemy/common/time.c +++ b/arch/mips/alchemy/common/time.c @@ -46,7 +46,7 @@ static cycle_t au1x_counter1_read(struct clocksource *cs) { - return au_readl(SYS_RTCREAD); + return alchemy_rdsys(AU1000_SYS_RTCREAD); } static struct clocksource au1x_counter1_clocksource = { @@ -60,12 +60,11 @@ static struct clocksource au1x_counter1_clocksource = { static int au1x_rtcmatch2_set_next_event(unsigned long delta, struct clock_event_device *cd) { - delta += au_readl(SYS_RTCREAD); + delta += alchemy_rdsys(AU1000_SYS_RTCREAD); /* wait for register access */ - while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M21) + while (alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_M21) ; - au_writel(delta, SYS_RTCMATCH2); - au_sync(); + alchemy_wrsys(delta, AU1000_SYS_RTCMATCH2); return 0; } @@ -112,31 +111,29 @@ static int __init alchemy_time_init(unsigned int m2int) * (the 32S bit seems to be stuck set to 1 once a single clock- * edge is detected, hence the timeouts). */ - if (CNTR_OK != (au_readl(SYS_COUNTER_CNTRL) & CNTR_OK)) + if (CNTR_OK != (alchemy_rdsys(AU1000_SYS_CNTRCTRL) & CNTR_OK)) goto cntr_err; /* * setup counter 1 (RTC) to tick at full speed */ t = 0xffffff; - while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S) && --t) + while ((alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_T1S) && --t) asm volatile ("nop"); if (!t) goto cntr_err; - au_writel(0, SYS_RTCTRIM); /* 32.768 kHz */ - au_sync(); + alchemy_wrsys(0, AU1000_SYS_RTCTRIM); /* 32.768 kHz */ t = 0xffffff; - while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && --t) + while ((alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_C1S) && --t) asm volatile ("nop"); if (!t) goto cntr_err; - au_writel(0, SYS_RTCWRITE); - au_sync(); + alchemy_wrsys(0, AU1000_SYS_RTCWRITE); t = 0xffffff; - while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && --t) + while ((alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_C1S) && --t) asm volatile ("nop"); if (!t) goto cntr_err; diff --git a/arch/mips/alchemy/devboards/db1000.c b/arch/mips/alchemy/devboards/db1000.c index 92dd929d4057..8201f00d575b 100644 --- a/arch/mips/alchemy/devboards/db1000.c +++ b/arch/mips/alchemy/devboards/db1000.c @@ -518,10 +518,9 @@ int __init db1000_dev_setup(void) gpio_direction_input(20); /* sd1 cd# */ /* spi_gpio on SSI0 pins */ - pfc = __raw_readl((void __iomem *)SYS_PINFUNC); + pfc = alchemy_rdsys(AU1000_SYS_PINFUNC); pfc |= (1 << 0); /* SSI0 pins as GPIOs */ - __raw_writel(pfc, (void __iomem *)SYS_PINFUNC); - wmb(); + alchemy_wrsys(pfc, AU1000_SYS_PINFUNC); spi_register_board_info(db1100_spi_info, ARRAY_SIZE(db1100_spi_info)); diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c index 9e46667f2597..408c36f37699 100644 --- a/arch/mips/alchemy/devboards/db1200.c +++ b/arch/mips/alchemy/devboards/db1200.c @@ -150,12 +150,11 @@ int __init db1200_board_setup(void) (whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf); /* SMBus/SPI on PSC0, Audio on PSC1 */ - pfc = __raw_readl((void __iomem *)SYS_PINFUNC); + pfc = alchemy_rdsys(AU1000_SYS_PINFUNC); pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B); pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3); pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */ - __raw_writel(pfc, (void __iomem *)SYS_PINFUNC); - wmb(); + alchemy_wrsys(pfc, AU1000_SYS_PINFUNC); /* Clock configurations: PSC0: ~50MHz via Clkgen0, derived from * CPU clock; all other clock generators off/unused. @@ -166,16 +165,13 @@ int __init db1200_board_setup(void) div = ((div >> 1) - 1) & 0xff; freq0 = div << SYS_FC_FRDIV0_BIT; - __raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0); - wmb(); + alchemy_wrsys(freq0, AU1000_SYS_FREQCTRL0); freq0 |= SYS_FC_FE0; /* enable F0 */ - __raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0); - wmb(); + alchemy_wrsys(freq0, AU1000_SYS_FREQCTRL0); /* psc0_intclk comes 1:1 from F0 */ clksrc = SYS_CS_MUX_FQ0 << SYS_CS_ME0_BIT; - __raw_writel(clksrc, (void __iomem *)SYS_CLKSRC); - wmb(); + alchemy_wrsys(clksrc, AU1000_SYS_CLKSRC); return 0; } @@ -886,7 +882,7 @@ int __init db1200_dev_setup(void) * As a result, in SPI mode, OTG simply won't work (PSC0 uses * it as an input pin which is pulled high on the boards). */ - pfc = __raw_readl((void __iomem *)SYS_PINFUNC) & ~SYS_PINFUNC_P0A; + pfc = alchemy_rdsys(AU1000_SYS_PINFUNC) & ~SYS_PINFUNC_P0A; /* switch off OTG VBUS supply */ gpio_request(215, "otg-vbus"); @@ -912,8 +908,7 @@ int __init db1200_dev_setup(void) printk(KERN_INFO " S6.8 ON : PSC0 mode SPI\n"); printk(KERN_INFO " OTG port VBUS supply disabled\n"); } - __raw_writel(pfc, (void __iomem *)SYS_PINFUNC); - wmb(); + alchemy_wrsys(pfc, AU1000_SYS_PINFUNC); /* Audio: DIP7 selects I2S(0)/AC97(1), but need I2C for I2S! * so: DIP7=1 || DIP8=0 => AC97, DIP7=0 && DIP8=1 => I2S diff --git a/arch/mips/alchemy/devboards/db1550.c b/arch/mips/alchemy/devboards/db1550.c index bbd8d9884702..392fb89270d6 100644 --- a/arch/mips/alchemy/devboards/db1550.c +++ b/arch/mips/alchemy/devboards/db1550.c @@ -31,16 +31,16 @@ static void __init db1550_hw_setup(void) { void __iomem *base; + unsigned long v; /* complete SPI setup: link psc0_intclk to a 48MHz source, * and assign GPIO16 to PSC0_SYNC1 (SPI cs# line) as well as PSC1_SYNC * for AC97 on PB1550. */ - base = (void __iomem *)SYS_CLKSRC; - __raw_writel(__raw_readl(base) | 0x000001e0, base); - base = (void __iomem *)SYS_PINFUNC; - __raw_writel(__raw_readl(base) | 1 | SYS_PF_PSC1_S1, base); - wmb(); + v = alchemy_rdsys(AU1000_SYS_CLKSRC); + alchemy_wrsys(v | 0x000001e0, AU1000_SYS_CLKSRC); + v = alchemy_rdsys(AU1000_SYS_PINFUNC); + alchemy_wrsys(v | 1 | SYS_PF_PSC1_S1, AU1000_SYS_PINFUNC); /* reset the AC97 codec now, the reset time in the psc-ac97 driver * is apparently too short although it's ridiculous as it is. diff --git a/arch/mips/alchemy/devboards/pm.c b/arch/mips/alchemy/devboards/pm.c index 61e90fe9eab1..bfeb8f3c0be6 100644 --- a/arch/mips/alchemy/devboards/pm.c +++ b/arch/mips/alchemy/devboards/pm.c @@ -45,23 +45,20 @@ static int db1x_pm_enter(suspend_state_t state) alchemy_gpio1_input_enable(); /* clear and setup wake cause and source */ - au_writel(0, SYS_WAKEMSK); - au_sync(); - au_writel(0, SYS_WAKESRC); - au_sync(); + alchemy_wrsys(0, AU1000_SYS_WAKEMSK); + alchemy_wrsys(0, AU1000_SYS_WAKESRC); - au_writel(db1x_pm_wakemsk, SYS_WAKEMSK); - au_sync(); + alchemy_wrsys(db1x_pm_wakemsk, AU1000_SYS_WAKEMSK); /* setup 1Hz-timer-based wakeup: wait for reg access */ - while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20) + while (alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_M20) asm volatile ("nop"); - au_writel(au_readl(SYS_TOYREAD) + db1x_pm_sleep_secs, SYS_TOYMATCH2); - au_sync(); + alchemy_wrsys(alchemy_rdsys(AU1000_SYS_TOYREAD) + db1x_pm_sleep_secs, + AU1000_SYS_TOYMATCH2); /* wait for value to really hit the register */ - while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20) + while (alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_M20) asm volatile ("nop"); /* ...and now the sandman can come! */ @@ -102,12 +99,10 @@ static void db1x_pm_end(void) /* read and store wakeup source, the clear the register. To * be able to clear it, WAKEMSK must be cleared first. */ - db1x_pm_last_wakesrc = au_readl(SYS_WAKESRC); - - au_writel(0, SYS_WAKEMSK); - au_writel(0, SYS_WAKESRC); - au_sync(); + db1x_pm_last_wakesrc = alchemy_rdsys(AU1000_SYS_WAKESRC); + alchemy_wrsys(0, AU1000_SYS_WAKEMSK); + alchemy_wrsys(0, AU1000_SYS_WAKESRC); } static const struct platform_suspend_ops db1x_pm_ops = { @@ -242,17 +237,13 @@ static int __init pm_init(void) * for confirmation since there's plenty of time from here to * the next suspend cycle. */ - if (au_readl(SYS_TOYTRIM) != 32767) { - au_writel(32767, SYS_TOYTRIM); - au_sync(); - } + if (alchemy_rdsys(AU1000_SYS_TOYTRIM) != 32767) + alchemy_wrsys(32767, AU1000_SYS_TOYTRIM); - db1x_pm_last_wakesrc = au_readl(SYS_WAKESRC); + db1x_pm_last_wakesrc = alchemy_rdsys(AU1000_SYS_WAKESRC); - au_writel(0, SYS_WAKESRC); - au_sync(); - au_writel(0, SYS_WAKEMSK); - au_sync(); + alchemy_wrsys(0, AU1000_SYS_WAKESRC); + alchemy_wrsys(0, AU1000_SYS_WAKEMSK); suspend_set_ops(&db1x_pm_ops); diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h index 16cd01236dc3..c8cfca9c3167 100644 --- a/arch/mips/include/asm/mach-au1x00/au1000.h +++ b/arch/mips/include/asm/mach-au1x00/au1000.h @@ -335,8 +335,7 @@ /* Programmable Counters 0 and 1 */ -#define SYS_BASE 0xB1900000 -#define SYS_COUNTER_CNTRL (SYS_BASE + 0x14) +#define AU1000_SYS_CNTRCTRL 0x14 # define SYS_CNTRL_E1S (1 << 23) # define SYS_CNTRL_T1S (1 << 20) # define SYS_CNTRL_M21 (1 << 19) @@ -358,24 +357,24 @@ # define SYS_CNTRL_C0S (1 << 0) /* Programmable Counter 0 Registers */ -#define SYS_TOYTRIM (SYS_BASE + 0) -#define SYS_TOYWRITE (SYS_BASE + 4) -#define SYS_TOYMATCH0 (SYS_BASE + 8) -#define SYS_TOYMATCH1 (SYS_BASE + 0xC) -#define SYS_TOYMATCH2 (SYS_BASE + 0x10) -#define SYS_TOYREAD (SYS_BASE + 0x40) +#define AU1000_SYS_TOYTRIM 0x00 +#define AU1000_SYS_TOYWRITE 0x04 +#define AU1000_SYS_TOYMATCH0 0x08 +#define AU1000_SYS_TOYMATCH1 0x0c +#define AU1000_SYS_TOYMATCH2 0x10 +#define AU1000_SYS_TOYREAD 0x40 /* Programmable Counter 1 Registers */ -#define SYS_RTCTRIM (SYS_BASE + 0x44) -#define SYS_RTCWRITE (SYS_BASE + 0x48) -#define SYS_RTCMATCH0 (SYS_BASE + 0x4C) -#define SYS_RTCMATCH1 (SYS_BASE + 0x50) -#define SYS_RTCMATCH2 (SYS_BASE + 0x54) -#define SYS_RTCREAD (SYS_BASE + 0x58) +#define AU1000_SYS_RTCTRIM 0x44 +#define AU1000_SYS_RTCWRITE 0x48 +#define AU1000_SYS_RTCMATCH0 0x4c +#define AU1000_SYS_RTCMATCH1 0x50 +#define AU1000_SYS_RTCMATCH2 0x54 +#define AU1000_SYS_RTCREAD 0x58 /* GPIO */ -#define SYS_PINFUNC 0xB190002C +#define AU1000_SYS_PINFUNC 0x2C # define SYS_PF_USB (1 << 15) /* 2nd USB device/host */ # define SYS_PF_U3 (1 << 14) /* GPIO23/U3TXD */ # define SYS_PF_U2 (1 << 13) /* GPIO22/U2TXD */ @@ -445,21 +444,21 @@ #define SYS_PINFUNC_S1B (1 << 2) /* Power Management */ -#define SYS_SCRATCH0 0xB1900018 -#define SYS_SCRATCH1 0xB190001C -#define SYS_WAKEMSK 0xB1900034 -#define SYS_ENDIAN 0xB1900038 -#define SYS_POWERCTRL 0xB190003C -#define SYS_WAKESRC 0xB190005C -#define SYS_SLPPWR 0xB1900078 -#define SYS_SLEEP 0xB190007C +#define AU1000_SYS_SCRATCH0 0x18 +#define AU1000_SYS_SCRATCH1 0x1c +#define AU1000_SYS_WAKEMSK 0x34 +#define AU1000_SYS_ENDIAN 0x38 +#define AU1000_SYS_POWERCTRL 0x3c +#define AU1000_SYS_WAKESRC 0x5c +#define AU1000_SYS_SLPPWR 0x78 +#define AU1000_SYS_SLEEP 0x7c #define SYS_WAKEMSK_D2 (1 << 9) #define SYS_WAKEMSK_M2 (1 << 8) #define SYS_WAKEMSK_GPIO(x) (1 << (x)) /* Clock Controller */ -#define SYS_FREQCTRL0 0xB1900020 +#define AU1000_SYS_FREQCTRL0 0x20 # define SYS_FC_FRDIV2_BIT 22 # define SYS_FC_FRDIV2_MASK (0xff << SYS_FC_FRDIV2_BIT) # define SYS_FC_FE2 (1 << 21) @@ -472,7 +471,7 @@ # define SYS_FC_FRDIV0_MASK (0xff << SYS_FC_FRDIV0_BIT) # define SYS_FC_FE0 (1 << 1) # define SYS_FC_FS0 (1 << 0) -#define SYS_FREQCTRL1 0xB1900024 +#define AU1000_SYS_FREQCTRL1 0x24 # define SYS_FC_FRDIV5_BIT 22 # define SYS_FC_FRDIV5_MASK (0xff << SYS_FC_FRDIV5_BIT) # define SYS_FC_FE5 (1 << 21) @@ -485,7 +484,7 @@ # define SYS_FC_FRDIV3_MASK (0xff << SYS_FC_FRDIV3_BIT) # define SYS_FC_FE3 (1 << 1) # define SYS_FC_FS3 (1 << 0) -#define SYS_CLKSRC 0xB1900028 +#define AU1000_SYS_CLKSRC 0x28 # define SYS_CS_ME1_BIT 27 # define SYS_CS_ME1_MASK (0x7 << SYS_CS_ME1_BIT) # define SYS_CS_DE1 (1 << 26) @@ -525,8 +524,12 @@ # define SYS_CS_MUX_FQ3 0x5 # define SYS_CS_MUX_FQ4 0x6 # define SYS_CS_MUX_FQ5 0x7 -#define SYS_CPUPLL 0xB1900060 -#define SYS_AUXPLL 0xB1900064 + +#define AU1000_SYS_CPUPLL 0x60 +#define AU1000_SYS_AUXPLL 0x64 + + +/**********************************************************************/ /* The PCI chip selects are outside the 32bit space, and since we can't @@ -694,6 +697,22 @@ static inline u32 au_readl(unsigned long reg) return *(volatile u32 *)reg; } +/* helpers to access the SYS_* registers */ +static inline unsigned long alchemy_rdsys(int regofs) +{ + void __iomem *b = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR); + + return __raw_readl(b + regofs); +} + +static inline void alchemy_wrsys(unsigned long v, int regofs) +{ + void __iomem *b = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR); + + __raw_writel(v, b + regofs); + wmb(); /* drain writebuffer */ +} + /* Early Au1000 have a write-only SYS_CPUPLL register. */ static inline int au1xxx_cpu_has_pll_wo(void) { diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h index 796afd051c35..9785e4ebb450 100644 --- a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h +++ b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h @@ -25,20 +25,20 @@ #define MAKE_IRQ(intc, off) (AU1000_INTC##intc##_INT_BASE + (off)) /* GPIO1 registers within SYS_ area */ -#define SYS_TRIOUTRD 0x100 -#define SYS_TRIOUTCLR 0x100 -#define SYS_OUTPUTRD 0x108 -#define SYS_OUTPUTSET 0x108 -#define SYS_OUTPUTCLR 0x10C -#define SYS_PINSTATERD 0x110 -#define SYS_PININPUTEN 0x110 +#define AU1000_SYS_TRIOUTRD 0x100 +#define AU1000_SYS_TRIOUTCLR 0x100 +#define AU1000_SYS_OUTPUTRD 0x108 +#define AU1000_SYS_OUTPUTSET 0x108 +#define AU1000_SYS_OUTPUTCLR 0x10C +#define AU1000_SYS_PINSTATERD 0x110 +#define AU1000_SYS_PININPUTEN 0x110 /* register offsets within GPIO2 block */ -#define GPIO2_DIR 0x00 -#define GPIO2_OUTPUT 0x08 -#define GPIO2_PINSTATE 0x0C -#define GPIO2_INTENABLE 0x10 -#define GPIO2_ENABLE 0x14 +#define AU1000_GPIO2_DIR 0x00 +#define AU1000_GPIO2_OUTPUT 0x08 +#define AU1000_GPIO2_PINSTATE 0x0C +#define AU1000_GPIO2_INTENABLE 0x10 +#define AU1000_GPIO2_ENABLE 0x14 struct gpio; @@ -217,26 +217,21 @@ static inline int au1200_irq_to_gpio(int irq) */ static inline void alchemy_gpio1_set_value(int gpio, int v) { - void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR); unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE); - unsigned long r = v ? SYS_OUTPUTSET : SYS_OUTPUTCLR; - __raw_writel(mask, base + r); - wmb(); + unsigned long r = v ? AU1000_SYS_OUTPUTSET : AU1000_SYS_OUTPUTCLR; + alchemy_wrsys(mask, r); } static inline int alchemy_gpio1_get_value(int gpio) { - void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR); unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE); - return __raw_readl(base + SYS_PINSTATERD) & mask; + return alchemy_rdsys(AU1000_SYS_PINSTATERD) & mask; } static inline int alchemy_gpio1_direction_input(int gpio) { - void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR); unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE); - __raw_writel(mask, base + SYS_TRIOUTCLR); - wmb(); + alchemy_wrsys(mask, AU1000_SYS_TRIOUTCLR); return 0; } @@ -279,13 +274,13 @@ static inline void __alchemy_gpio2_mod_dir(int gpio, int to_out) { void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); unsigned long mask = 1 << (gpio - ALCHEMY_GPIO2_BASE); - unsigned long d = __raw_readl(base + GPIO2_DIR); + unsigned long d = __raw_readl(base + AU1000_GPIO2_DIR); if (to_out) d |= mask; else d &= ~mask; - __raw_writel(d, base + GPIO2_DIR); + __raw_writel(d, base + AU1000_GPIO2_DIR); wmb(); } @@ -294,14 +289,15 @@ static inline void alchemy_gpio2_set_value(int gpio, int v) void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); unsigned long mask; mask = ((v) ? 0x00010001 : 0x00010000) << (gpio - ALCHEMY_GPIO2_BASE); - __raw_writel(mask, base + GPIO2_OUTPUT); + __raw_writel(mask, base + AU1000_GPIO2_OUTPUT); wmb(); } static inline int alchemy_gpio2_get_value(int gpio) { void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); - return __raw_readl(base + GPIO2_PINSTATE) & (1 << (gpio - ALCHEMY_GPIO2_BASE)); + return __raw_readl(base + AU1000_GPIO2_PINSTATE) & + (1 << (gpio - ALCHEMY_GPIO2_BASE)); } static inline int alchemy_gpio2_direction_input(int gpio) @@ -352,12 +348,12 @@ static inline int alchemy_gpio2_to_irq(int gpio) static inline void __alchemy_gpio2_mod_int(int gpio2, int en) { void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); - unsigned long r = __raw_readl(base + GPIO2_INTENABLE); + unsigned long r = __raw_readl(base + AU1000_GPIO2_INTENABLE); if (en) r |= 1 << gpio2; else r &= ~(1 << gpio2); - __raw_writel(r, base + GPIO2_INTENABLE); + __raw_writel(r, base + AU1000_GPIO2_INTENABLE); wmb(); } @@ -434,9 +430,9 @@ static inline void alchemy_gpio2_disable_int(int gpio2) static inline void alchemy_gpio2_enable(void) { void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); - __raw_writel(3, base + GPIO2_ENABLE); /* reset, clock enabled */ + __raw_writel(3, base + AU1000_GPIO2_ENABLE); /* reset, clock enabled */ wmb(); - __raw_writel(1, base + GPIO2_ENABLE); /* clock enabled */ + __raw_writel(1, base + AU1000_GPIO2_ENABLE); /* clock enabled */ wmb(); } @@ -448,7 +444,7 @@ static inline void alchemy_gpio2_enable(void) static inline void alchemy_gpio2_disable(void) { void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); - __raw_writel(2, base + GPIO2_ENABLE); /* reset, clock disabled */ + __raw_writel(2, base + AU1000_GPIO2_ENABLE); /* reset, clock disabled */ wmb(); } |