s390/boot: move dma sections from decompressor to decompressed kernel

This change simplifies the task of making the decompressor relocatable.

The decompressor's image contains special DMA sections between _sdma and
_edma. This DMA segment is loaded at boot as part of the decompressor and
then simply handed over to the decompressed kernel. The decompressor itself
never uses it in any way. The primary reason for this is the need to keep
the aforementioned DMA segment below 2GB which is required by architecture,
and because the decompressor is always loaded at a fixed low physical
address, it is guaranteed that the DMA region will not cross the 2GB
memory limit. If the DMA region had been placed in the decompressed kernel,
then KASLR would make this guarantee impossible to fulfill or it would
be restricted to the first 2GB of memory address space.

This commit moves all DMA sections between _sdma and _edma from
the decompressor's image to the decompressed kernel's image. The complete
DMA region is placed in the init section of the decompressed kernel and
immediately relocated below 2GB at start-up before it is needed by other
parts of the decompressed kernel. The relocation of the DMA region happens
even if the decompressed kernel is already located below 2GB in order
to keep the first implementation simple. The relocation should not have
any noticeable impact on boot time because the DMA segment is only a couple
of pages.

After relocating the DMA sections, the kernel has to fix all references
which point into it. In order to automate this, place all variables
pointing into the DMA sections in a special .dma.refs section. All such
variables must be defined using the new __dma_ref macro. Only variables
containing addresses within the DMA sections must be placed in the new
.dma.refs section.

Furthermore, move the initialization of control registers from
the decompressor to the decompressed kernel because some control registers
reference tables that must be placed in the DMA data section to
guarantee that their addresses are below 2G. Because the decompressed
kernel relocates the DMA sections at startup, the content of control
registers CR2, CR5 and CR15 must be updated with new addresses after
the relocation. The decompressed kernel initializes all control registers
early at boot and then updates the content of CR2, CR5 and CR15
as soon as the DMA relocation has occurred. This practically reverts
the commit a80313ff91ab ("s390/kernel: introduce .dma sections").

Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

1 files changed, 0 insertions, 30 deletions

diff --git a/arch/s390/boot/head.S b/arch/s390/boot/head.S
index 63a139a2f503..40f4cff538b8 100644
--- a/arch/s390/boot/head.S
+++ b/arch/s390/boot/head.S
@@ -317,7 +317,6 @@ SYM_CODE_START_LOCAL(startup_normal)
 	xc	0x300(256),0x300
 	xc	0xe00(256),0xe00
 	xc	0xf00(256),0xf00
-	lctlg	%c0,%c15,.Lctl-.LPG0(%r13)	# load control registers
 	stcke	__LC_BOOT_CLOCK
 	mvc	__LC_LAST_UPDATE_CLOCK(8),__LC_BOOT_CLOCK+1
 	spt	6f-.LPG0(%r13)
@@ -336,35 +335,6 @@ SYM_CODE_END(startup_normal)
 	.quad	0x0000000180000000,startup_pgm_check_handler
 .Lio_new_psw:
 	.quad	0x0002000180000000,0x1f0	# disabled wait
-.Lctl:	.quad	0x04040000		# cr0: AFP registers & secondary space
-	.quad	0			# cr1: primary space segment table
-	.quad	.Lduct			# cr2: dispatchable unit control table
-	.quad	0			# cr3: instruction authorization
-	.quad	0xffff			# cr4: instruction authorization
-	.quad	.Lduct			# cr5: primary-aste origin
-	.quad	0			# cr6:	I/O interrupts
-	.quad	0			# cr7:	secondary space segment table
-	.quad	0x0000000000008000	# cr8:	access registers translation
-	.quad	0			# cr9:	tracing off
-	.quad	0			# cr10: tracing off
-	.quad	0			# cr11: tracing off
-	.quad	0			# cr12: tracing off
-	.quad	0			# cr13: home space segment table
-	.quad	0xc0000000		# cr14: machine check handling off
-	.quad	.Llinkage_stack		# cr15: linkage stack operations
-
-	.section .dma.data,"aw",@progbits
-.Lduct: .long	0,.Laste,.Laste,0,.Lduald,0,0,0
-	.long	0,0,0,0,0,0,0,0
-.Llinkage_stack:
-	.long	0,0,0x89000000,0,0,0,0x8a000000,0
-	.align 64
-.Laste:	.quad	0,0xffffffffffffffff,0,0,0,0,0,0
-	.align	128
-.Lduald:.rept	8
-	.long	0x80000000,0,0,0	# invalid access-list entries
-	.endr
-	.previous
 
 #include "head_kdump.S"