diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2018-08-15 23:05:12 +0300 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2018-08-15 23:05:12 +0300 |
commit | fa1b5d09d0771247d407df89228b3902de8e2ce6 (patch) | |
tree | 9cf03889625662c234dfc476371a181a76631776 /arch/um/drivers/Kconfig | |
parent | 01f0e5cdedea448ea48eaddc1366593126b0fe98 (diff) | |
parent | 59e0b520c75c8b4588395aea6170e551c4189fd8 (diff) | |
download | linux-fa1b5d09d0771247d407df89228b3902de8e2ce6.tar.xz |
Merge tag 'kconfig-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig consolidation from Masahiro Yamada:
"Consolidation of Kconfig files by Christoph Hellwig.
Move the source statements of arch-independent Kconfig files instead
of duplicating the includes in every arch/$(SRCARCH)/Kconfig"
* tag 'kconfig-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: add a Memory Management options" menu
kconfig: move the "Executable file formats" menu to fs/Kconfig.binfmt
kconfig: use a menu in arch/Kconfig to reduce clutter
kconfig: include kernel/Kconfig.preempt from init/Kconfig
Kconfig: consolidate the "Kernel hacking" menu
kconfig: include common Kconfig files from top-level Kconfig
kconfig: remove duplicate SWAP symbol defintions
um: create a proper drivers Kconfig
um: cleanup Kconfig files
um: stop abusing KBUILD_KCONFIG
Diffstat (limited to 'arch/um/drivers/Kconfig')
-rw-r--r-- | arch/um/drivers/Kconfig | 337 |
1 files changed, 337 insertions, 0 deletions
diff --git a/arch/um/drivers/Kconfig b/arch/um/drivers/Kconfig new file mode 100644 index 000000000000..2b1aaf7755aa --- /dev/null +++ b/arch/um/drivers/Kconfig @@ -0,0 +1,337 @@ +# SPDX-License-Identifier: GPL-2.0 + +menu "UML Character Devices" + +config STDERR_CONSOLE + bool "stderr console" + default y + help + console driver which dumps all printk messages to stderr. + +config SSL + bool "Virtual serial line" + help + The User-Mode Linux environment allows you to create virtual serial + lines on the UML that are usually made to show up on the host as + ttys or ptys. + + See <http://user-mode-linux.sourceforge.net/old/input.html> for more + information and command line examples of how to use this facility. + + Unless you have a specific reason for disabling this, say Y. + +config NULL_CHAN + bool "null channel support" + help + This option enables support for attaching UML consoles and serial + lines to a device similar to /dev/null. Data written to it disappears + and there is never any data to be read. + +config PORT_CHAN + bool "port channel support" + help + This option enables support for attaching UML consoles and serial + lines to host portals. They may be accessed with 'telnet <host> + <port number>'. Any number of consoles and serial lines may be + attached to a single portal, although what UML device you get when + you telnet to that portal will be unpredictable. + It is safe to say 'Y' here. + +config PTY_CHAN + bool "pty channel support" + help + This option enables support for attaching UML consoles and serial + lines to host pseudo-terminals. Access to both traditional + pseudo-terminals (/dev/pty*) and pts pseudo-terminals are controlled + with this option. The assignment of UML devices to host devices + will be announced in the kernel message log. + It is safe to say 'Y' here. + +config TTY_CHAN + bool "tty channel support" + help + This option enables support for attaching UML consoles and serial + lines to host terminals. Access to both virtual consoles + (/dev/tty*) and the slave side of pseudo-terminals (/dev/ttyp* and + /dev/pts/*) are controlled by this option. + It is safe to say 'Y' here. + +config XTERM_CHAN + bool "xterm channel support" + help + This option enables support for attaching UML consoles and serial + lines to xterms. Each UML device so assigned will be brought up in + its own xterm. + It is safe to say 'Y' here. + +config NOCONFIG_CHAN + bool + default !(XTERM_CHAN && TTY_CHAN && PTY_CHAN && PORT_CHAN && NULL_CHAN) + +config CON_ZERO_CHAN + string "Default main console channel initialization" + default "fd:0,fd:1" + help + This is the string describing the channel to which the main console + will be attached by default. This value can be overridden from the + command line. The default value is "fd:0,fd:1", which attaches the + main console to stdin and stdout. + It is safe to leave this unchanged. + +config CON_CHAN + string "Default console channel initialization" + default "xterm" + help + This is the string describing the channel to which all consoles + except the main console will be attached by default. This value can + be overridden from the command line. The default value is "xterm", + which brings them up in xterms. + It is safe to leave this unchanged, although you may wish to change + this if you expect the UML that you build to be run in environments + which don't have X or xterm available. + +config SSL_CHAN + string "Default serial line channel initialization" + default "pty" + help + This is the string describing the channel to which the serial lines + will be attached by default. This value can be overridden from the + command line. The default value is "pty", which attaches them to + traditional pseudo-terminals. + It is safe to leave this unchanged, although you may wish to change + this if you expect the UML that you build to be run in environments + which don't have a set of /dev/pty* devices. + +config UML_SOUND + tristate "Sound support" + help + This option enables UML sound support. If enabled, it will pull in + soundcore and the UML hostaudio relay, which acts as a intermediary + between the host's dsp and mixer devices and the UML sound system. + It is safe to say 'Y' here. + +config SOUND + tristate + default UML_SOUND + +config SOUND_OSS_CORE + bool + default UML_SOUND + +config HOSTAUDIO + tristate + default UML_SOUND + +endmenu + +menu "UML Network Devices" + depends on NET + +# UML virtual driver +config UML_NET + bool "Virtual network device" + help + While the User-Mode port cannot directly talk to any physical + hardware devices, this choice and the following transport options + provide one or more virtual network devices through which the UML + kernels can talk to each other, the host, and with the host's help, + machines on the outside world. + + For more information, including explanations of the networking and + sample configurations, see + <http://user-mode-linux.sourceforge.net/old/networking.html>. + + If you'd like to be able to enable networking in the User-Mode + linux environment, say Y; otherwise say N. Note that you must + enable at least one of the following transport options to actually + make use of UML networking. + +config UML_NET_ETHERTAP + bool "Ethertap transport" + depends on UML_NET + help + The Ethertap User-Mode Linux network transport allows a single + running UML to exchange packets with its host over one of the + host's Ethertap devices, such as /dev/tap0. Additional running + UMLs can use additional Ethertap devices, one per running UML. + While the UML believes it's on a (multi-device, broadcast) virtual + Ethernet network, it's in fact communicating over a point-to-point + link with the host. + + To use this, your host kernel must have support for Ethertap + devices. Also, if your host kernel is 2.4.x, it must have + CONFIG_NETLINK_DEV configured as Y or M. + + For more information, see + <http://user-mode-linux.sourceforge.net/old/networking.html> That site + has examples of the UML command line to use to enable Ethertap + networking. + + If you'd like to set up an IP network with the host and/or the + outside world, say Y to this, the Daemon Transport and/or the + Slip Transport. You'll need at least one of them, but may choose + more than one without conflict. If you don't need UML networking, + say N. + +config UML_NET_TUNTAP + bool "TUN/TAP transport" + depends on UML_NET + help + The UML TUN/TAP network transport allows a UML instance to exchange + packets with the host over a TUN/TAP device. This option will only + work with a 2.4 host, unless you've applied the TUN/TAP patch to + your 2.2 host kernel. + + To use this transport, your host kernel must have support for TUN/TAP + devices, either built-in or as a module. + +config UML_NET_SLIP + bool "SLIP transport" + depends on UML_NET + help + The slip User-Mode Linux network transport allows a running UML to + network with its host over a point-to-point link. Unlike Ethertap, + which can carry any Ethernet frame (and hence even non-IP packets), + the slip transport can only carry IP packets. + + To use this, your host must support slip devices. + + For more information, see + <http://user-mode-linux.sourceforge.net/old/networking.html>. + has examples of the UML command line to use to enable slip + networking, and details of a few quirks with it. + + The Ethertap Transport is preferred over slip because of its + limitations. If you prefer slip, however, say Y here. Otherwise + choose the Multicast transport (to network multiple UMLs on + multiple hosts), Ethertap (to network with the host and the + outside world), and/or the Daemon transport (to network multiple + UMLs on a single host). You may choose more than one without + conflict. If you don't need UML networking, say N. + +config UML_NET_DAEMON + bool "Daemon transport" + depends on UML_NET + help + This User-Mode Linux network transport allows one or more running + UMLs on a single host to communicate with each other, but not to + the host. + + To use this form of networking, you'll need to run the UML + networking daemon on the host. + + For more information, see + <http://user-mode-linux.sourceforge.net/old/networking.html> That site + has examples of the UML command line to use to enable Daemon + networking. + + If you'd like to set up a network with other UMLs on a single host, + say Y. If you need a network between UMLs on multiple physical + hosts, choose the Multicast Transport. To set up a network with + the host and/or other IP machines, say Y to the Ethertap or Slip + transports. You'll need at least one of them, but may choose + more than one without conflict. If you don't need UML networking, + say N. + +config UML_NET_VECTOR + bool "Vector I/O high performance network devices" + depends on UML_NET + help + This User-Mode Linux network driver uses multi-message send + and receive functions. The host running the UML guest must have + a linux kernel version above 3.0 and a libc version > 2.13. + This driver provides tap, raw, gre and l2tpv3 network transports + with up to 4 times higher network throughput than the UML network + drivers. + +config UML_NET_VDE + bool "VDE transport" + depends on UML_NET + help + This User-Mode Linux network transport allows one or more running + UMLs on a single host to communicate with each other and also + with the rest of the world using Virtual Distributed Ethernet, + an improved fork of uml_switch. + + You must have libvdeplug installed in order to build the vde + transport into UML. + + To use this form of networking, you will need to run vde_switch + on the host. + + For more information, see <http://wiki.virtualsquare.org/> + That site has a good overview of what VDE is and also examples + of the UML command line to use to enable VDE networking. + + If you need UML networking with VDE, + say Y. + +config UML_NET_MCAST + bool "Multicast transport" + depends on UML_NET + help + This Multicast User-Mode Linux network transport allows multiple + UMLs (even ones running on different host machines!) to talk to + each other over a virtual ethernet network. However, it requires + at least one UML with one of the other transports to act as a + bridge if any of them need to be able to talk to their hosts or any + other IP machines. + + To use this, your host kernel(s) must support IP Multicasting. + + For more information, see + <http://user-mode-linux.sourceforge.net/old/networking.html> That site + has examples of the UML command line to use to enable Multicast + networking, and notes about the security of this approach. + + If you need UMLs on multiple physical hosts to communicate as if + they shared an Ethernet network, say Y. If you need to communicate + with other IP machines, make sure you select one of the other + transports (possibly in addition to Multicast; they're not + exclusive). If you don't need to network UMLs say N to each of + the transports. + +config UML_NET_PCAP + bool "pcap transport" + depends on UML_NET + help + The pcap transport makes a pcap packet stream on the host look + like an ethernet device inside UML. This is useful for making + UML act as a network monitor for the host. You must have libcap + installed in order to build the pcap transport into UML. + + For more information, see + <http://user-mode-linux.sourceforge.net/old/networking.html> That site + has examples of the UML command line to use to enable this option. + + If you intend to use UML as a network monitor for the host, say + Y here. Otherwise, say N. + +config UML_NET_SLIRP + bool "SLiRP transport" + depends on UML_NET + help + The SLiRP User-Mode Linux network transport allows a running UML + to network by invoking a program that can handle SLIP encapsulated + packets. This is commonly (but not limited to) the application + known as SLiRP, a program that can re-socket IP packets back onto + the host on which it is run. Only IP packets are supported, + unlike other network transports that can handle all Ethernet + frames. In general, slirp allows the UML the same IP connectivity + to the outside world that the host user is permitted, and unlike + other transports, SLiRP works without the need of root level + privleges, setuid binaries, or SLIP devices on the host. This + also means not every type of connection is possible, but most + situations can be accommodated with carefully crafted slirp + commands that can be passed along as part of the network device's + setup string. The effect of this transport on the UML is similar + that of a host behind a firewall that masquerades all network + connections passing through it (but is less secure). + + To use this you should first have slirp compiled somewhere + accessible on the host, and have read its documentation. If you + don't need UML networking, say N. + + Startup example: "eth0=slirp,FE:FD:01:02:03:04,/usr/local/bin/slirp" + +endmenu |