perf/x86/intel/lbr: Support LBR_CTL

An IA32_LBR_CTL is introduced for Architecture LBR to enable and config
LBR registers to replace the previous LBR_SELECT.

All the related members in struct cpu_hw_events and struct x86_pmu
have to be renamed.

Some new macros are added to reflect the layout of LBR_CTL.

The mapping from PERF_SAMPLE_BRANCH_* to the corresponding bits in
LBR_CTL MSR is saved in lbr_ctl_map now, which is not a const value.
The value relies on the CPUID enumeration.

For the previous model-specific LBR, most of the bits in LBR_SELECT
operate in the suppressed mode. For the bits in LBR_CTL, the polarity is
inverted.

For the previous model-specific LBR format 5 (LBR_FORMAT_INFO), if the
NO_CYCLES and NO_FLAGS type are set, the flag LBR_NO_INFO will be set to
avoid the unnecessary LBR_INFO MSR read. Although Architecture LBR also
has a dedicated LBR_INFO MSR, perf doesn't need to check and set the
flag LBR_NO_INFO. For Architecture LBR, XSAVES instruction will be used
as the default way to read the LBR MSRs all together. The overhead which
the flag tries to avoid doesn't exist anymore. Dropping the flag can
save the extra check for the flag in the lbr_read() later, and make the
code cleaner.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1593780569-62993-10-git-send-email-kan.liang@linux.intel.com

1 files changed, 43 insertions, 0 deletions

diff --git a/arch/x86/events/intel/lbr.c b/arch/x86/events/intel/lbr.c
index e62baa996474..77425624752c 100644
--- a/arch/x86/events/intel/lbr.c
+++ b/arch/x86/events/intel/lbr.c
@@ -132,6 +132,44 @@ enum {
 	 X86_BR_IRQ		|\
 	 X86_BR_INT)
 
+/*
+ * Intel LBR_CTL bits
+ *
+ * Hardware branch filter for Arch LBR
+ */
+#define ARCH_LBR_KERNEL_BIT		1  /* capture at ring0 */
+#define ARCH_LBR_USER_BIT		2  /* capture at ring > 0 */
+#define ARCH_LBR_CALL_STACK_BIT		3  /* enable call stack */
+#define ARCH_LBR_JCC_BIT		16 /* capture conditional branches */
+#define ARCH_LBR_REL_JMP_BIT		17 /* capture relative jumps */
+#define ARCH_LBR_IND_JMP_BIT		18 /* capture indirect jumps */
+#define ARCH_LBR_REL_CALL_BIT		19 /* capture relative calls */
+#define ARCH_LBR_IND_CALL_BIT		20 /* capture indirect calls */
+#define ARCH_LBR_RETURN_BIT		21 /* capture near returns */
+#define ARCH_LBR_OTHER_BRANCH_BIT	22 /* capture other branches */
+
+#define ARCH_LBR_KERNEL			(1ULL << ARCH_LBR_KERNEL_BIT)
+#define ARCH_LBR_USER			(1ULL << ARCH_LBR_USER_BIT)
+#define ARCH_LBR_CALL_STACK		(1ULL << ARCH_LBR_CALL_STACK_BIT)
+#define ARCH_LBR_JCC			(1ULL << ARCH_LBR_JCC_BIT)
+#define ARCH_LBR_REL_JMP		(1ULL << ARCH_LBR_REL_JMP_BIT)
+#define ARCH_LBR_IND_JMP		(1ULL << ARCH_LBR_IND_JMP_BIT)
+#define ARCH_LBR_REL_CALL		(1ULL << ARCH_LBR_REL_CALL_BIT)
+#define ARCH_LBR_IND_CALL		(1ULL << ARCH_LBR_IND_CALL_BIT)
+#define ARCH_LBR_RETURN			(1ULL << ARCH_LBR_RETURN_BIT)
+#define ARCH_LBR_OTHER_BRANCH		(1ULL << ARCH_LBR_OTHER_BRANCH_BIT)
+
+#define ARCH_LBR_ANY			 \
+	(ARCH_LBR_JCC			|\
+	 ARCH_LBR_REL_JMP		|\
+	 ARCH_LBR_IND_JMP		|\
+	 ARCH_LBR_REL_CALL		|\
+	 ARCH_LBR_IND_CALL		|\
+	 ARCH_LBR_RETURN		|\
+	 ARCH_LBR_OTHER_BRANCH)
+
+#define ARCH_LBR_CTL_MASK			0x7f000e
+
 static void intel_pmu_lbr_filter(struct cpu_hw_events *cpuc);
 
 /*
@@ -820,6 +858,11 @@ static int intel_pmu_setup_hw_lbr_filter(struct perf_event *event)
 	reg = &event->hw.branch_reg;
 	reg->idx = EXTRA_REG_LBR;
 
+	if (static_cpu_has(X86_FEATURE_ARCH_LBR)) {
+		reg->config = mask;
+		return 0;
+	}
+
 	/*
 	 * The first 9 bits (LBR_SEL_MASK) in LBR_SELECT operate
 	 * in suppress mode. So LBR_SELECT should be set to