diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2015-06-23 03:59:09 +0300 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2015-06-23 03:59:09 +0300 |
commit | d70b3ef54ceaf1c7c92209f5a662a670d04cbed9 (patch) | |
tree | 0f38109c1cabe9e2df028041c1e30f36c803ec5b /arch/x86/kernel/acpi/boot.c | |
parent | 650ec5a6bd5df4ab0c9ef38d05b94cd82fb99ad8 (diff) | |
parent | 7ef3d7d58d9dc73ee3d4f8f56d0024c8cca8163f (diff) | |
download | linux-d70b3ef54ceaf1c7c92209f5a662a670d04cbed9.tar.xz |
Merge branch 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Ingo Molnar:
"There were so many changes in the x86/asm, x86/apic and x86/mm topics
in this cycle that the topical separation of -tip broke down somewhat -
so the result is a more traditional architecture pull request,
collected into the 'x86/core' topic.
The topics were still maintained separately as far as possible, so
bisectability and conceptual separation should still be pretty good -
but there were a handful of merge points to avoid excessive
dependencies (and conflicts) that would have been poorly tested in the
end.
The next cycle will hopefully be much more quiet (or at least will
have fewer dependencies).
The main changes in this cycle were:
* x86/apic changes, with related IRQ core changes: (Jiang Liu, Thomas
Gleixner)
- This is the second and most intrusive part of changes to the x86
interrupt handling - full conversion to hierarchical interrupt
domains:
[IOAPIC domain] -----
|
[MSI domain] --------[Remapping domain] ----- [ Vector domain ]
| (optional) |
[HPET MSI domain] ----- |
|
[DMAR domain] -----------------------------
|
[Legacy domain] -----------------------------
This now reflects the actual hardware and allowed us to distangle
the domain specific code from the underlying parent domain, which
can be optional in the case of interrupt remapping. It's a clear
separation of functionality and removes quite some duct tape
constructs which plugged the remap code between ioapic/msi/hpet
and the vector management.
- Intel IOMMU IRQ remapping enhancements, to allow direct interrupt
injection into guests (Feng Wu)
* x86/asm changes:
- Tons of cleanups and small speedups, micro-optimizations. This
is in preparation to move a good chunk of the low level entry
code from assembly to C code (Denys Vlasenko, Andy Lutomirski,
Brian Gerst)
- Moved all system entry related code to a new home under
arch/x86/entry/ (Ingo Molnar)
- Removal of the fragile and ugly CFI dwarf debuginfo annotations.
Conversion to C will reintroduce many of them - but meanwhile
they are only getting in the way, and the upstream kernel does
not rely on them (Ingo Molnar)
- NOP handling refinements. (Borislav Petkov)
* x86/mm changes:
- Big PAT and MTRR rework: making the code more robust and
preparing to phase out exposing direct MTRR interfaces to drivers -
in favor of using PAT driven interfaces (Toshi Kani, Luis R
Rodriguez, Borislav Petkov)
- New ioremap_wt()/set_memory_wt() interfaces to support
Write-Through cached memory mappings. This is especially
important for good performance on NVDIMM hardware (Toshi Kani)
* x86/ras changes:
- Add support for deferred errors on AMD (Aravind Gopalakrishnan)
This is an important RAS feature which adds hardware support for
poisoned data. That means roughly that the hardware marks data
which it has detected as corrupted but wasn't able to correct, as
poisoned data and raises an APIC interrupt to signal that in the
form of a deferred error. It is the OS's responsibility then to
take proper recovery action and thus prolonge system lifetime as
far as possible.
- Add support for Intel "Local MCE"s: upcoming CPUs will support
CPU-local MCE interrupts, as opposed to the traditional system-
wide broadcasted MCE interrupts (Ashok Raj)
- Misc cleanups (Borislav Petkov)
* x86/platform changes:
- Intel Atom SoC updates
... and lots of other cleanups, fixlets and other changes - see the
shortlog and the Git log for details"
* 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (222 commits)
x86/hpet: Use proper hpet device number for MSI allocation
x86/hpet: Check for irq==0 when allocating hpet MSI interrupts
x86/mm/pat, drivers/infiniband/ipath: Use arch_phys_wc_add() and require PAT disabled
x86/mm/pat, drivers/media/ivtv: Use arch_phys_wc_add() and require PAT disabled
x86/platform/intel/baytrail: Add comments about why we disabled HPET on Baytrail
genirq: Prevent crash in irq_move_irq()
genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain
iommu, x86: Properly handle posted interrupts for IOMMU hotplug
iommu, x86: Provide irq_remapping_cap() interface
iommu, x86: Setup Posted-Interrupts capability for Intel iommu
iommu, x86: Add cap_pi_support() to detect VT-d PI capability
iommu, x86: Avoid migrating VT-d posted interrupts
iommu, x86: Save the mode (posted or remapped) of an IRTE
iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip
iommu: dmar: Provide helper to copy shared irte fields
iommu: dmar: Extend struct irte for VT-d Posted-Interrupts
iommu: Add new member capability to struct irq_remap_ops
x86/asm/entry/64: Disentangle error_entry/exit gsbase/ebx/usermode code
x86/asm/entry/32: Shorten __audit_syscall_entry() args preparation
x86/asm/entry/32: Explain reloading of registers after __audit_syscall_entry()
...
Diffstat (limited to 'arch/x86/kernel/acpi/boot.c')
-rw-r--r-- | arch/x86/kernel/acpi/boot.c | 73 |
1 files changed, 22 insertions, 51 deletions
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index dbe76a14c3c9..e49ee24da85e 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -31,12 +31,12 @@ #include <linux/module.h> #include <linux/dmi.h> #include <linux/irq.h> -#include <linux/irqdomain.h> #include <linux/slab.h> #include <linux/bootmem.h> #include <linux/ioport.h> #include <linux/pci.h> +#include <asm/irqdomain.h> #include <asm/pci_x86.h> #include <asm/pgtable.h> #include <asm/io_apic.h> @@ -400,57 +400,13 @@ static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger, return 0; } -static int mp_register_gsi(struct device *dev, u32 gsi, int trigger, - int polarity) -{ - int irq, node; - - if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) - return gsi; - - trigger = trigger == ACPI_EDGE_SENSITIVE ? 0 : 1; - polarity = polarity == ACPI_ACTIVE_HIGH ? 0 : 1; - node = dev ? dev_to_node(dev) : NUMA_NO_NODE; - if (mp_set_gsi_attr(gsi, trigger, polarity, node)) { - pr_warn("Failed to set pin attr for GSI%d\n", gsi); - return -1; - } - - irq = mp_map_gsi_to_irq(gsi, IOAPIC_MAP_ALLOC); - if (irq < 0) - return irq; - - /* Don't set up the ACPI SCI because it's already set up */ - if (enable_update_mptable && acpi_gbl_FADT.sci_interrupt != gsi) - mp_config_acpi_gsi(dev, gsi, trigger, polarity); - - return irq; -} - -static void mp_unregister_gsi(u32 gsi) -{ - int irq; - - if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) - return; - - irq = mp_map_gsi_to_irq(gsi, 0); - if (irq > 0) - mp_unmap_irq(irq); -} - -static struct irq_domain_ops acpi_irqdomain_ops = { - .map = mp_irqdomain_map, - .unmap = mp_irqdomain_unmap, -}; - static int __init acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end) { struct acpi_madt_io_apic *ioapic = NULL; struct ioapic_domain_cfg cfg = { .type = IOAPIC_DOMAIN_DYNAMIC, - .ops = &acpi_irqdomain_ops, + .ops = &mp_ioapic_irqdomain_ops, }; ioapic = (struct acpi_madt_io_apic *)header; @@ -652,7 +608,7 @@ static int acpi_register_gsi_pic(struct device *dev, u32 gsi, * Make sure all (legacy) PCI IRQs are set as level-triggered. */ if (trigger == ACPI_LEVEL_SENSITIVE) - eisa_set_level_irq(gsi); + elcr_set_level_irq(gsi); #endif return gsi; @@ -663,10 +619,21 @@ static int acpi_register_gsi_ioapic(struct device *dev, u32 gsi, int trigger, int polarity) { int irq = gsi; - #ifdef CONFIG_X86_IO_APIC + int node; + struct irq_alloc_info info; + + node = dev ? dev_to_node(dev) : NUMA_NO_NODE; + trigger = trigger == ACPI_EDGE_SENSITIVE ? 0 : 1; + polarity = polarity == ACPI_ACTIVE_HIGH ? 0 : 1; + ioapic_set_alloc_attr(&info, node, trigger, polarity); + mutex_lock(&acpi_ioapic_lock); - irq = mp_register_gsi(dev, gsi, trigger, polarity); + irq = mp_map_gsi_to_irq(gsi, IOAPIC_MAP_ALLOC, &info); + /* Don't set up the ACPI SCI because it's already set up */ + if (irq >= 0 && enable_update_mptable && + acpi_gbl_FADT.sci_interrupt != gsi) + mp_config_acpi_gsi(dev, gsi, trigger, polarity); mutex_unlock(&acpi_ioapic_lock); #endif @@ -676,8 +643,12 @@ static int acpi_register_gsi_ioapic(struct device *dev, u32 gsi, static void acpi_unregister_gsi_ioapic(u32 gsi) { #ifdef CONFIG_X86_IO_APIC + int irq; + mutex_lock(&acpi_ioapic_lock); - mp_unregister_gsi(gsi); + irq = mp_map_gsi_to_irq(gsi, 0, NULL); + if (irq > 0) + mp_unmap_irq(irq); mutex_unlock(&acpi_ioapic_lock); #endif } @@ -786,7 +757,7 @@ int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base) u64 addr; struct ioapic_domain_cfg cfg = { .type = IOAPIC_DOMAIN_DYNAMIC, - .ops = &acpi_irqdomain_ops, + .ops = &mp_ioapic_irqdomain_ops, }; ioapic_id = acpi_get_ioapic_id(handle, gsi_base, &addr); |